/* * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting * Copyright (c) 2002-2008 Atheros Communications, Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * * $Id: ar5416_reset.c,v 1.1.8.2 2010/04/21 00:28:07 matt Exp $ */ #include "opt_ah.h" #include "ah.h" #include "ah_internal.h" #include "ah_devid.h" #include "ah_eeprom_v14.h" #include "ar5416/ar5416.h" #include "ar5416/ar5416reg.h" #include "ar5416/ar5416phy.h" #ifdef AH_SUPPORT_AR9280 #include "ar5416/ar9280.h" #endif /* Eeprom versioning macros. Returns true if the version is equal or newer than the ver specified */ #define EEP_MINOR(_ah) \ (AH_PRIVATE(_ah)->ah_eeversion & AR5416_EEP_VER_MINOR_MASK) #define IS_EEP_MINOR_V2(_ah) (EEP_MINOR(_ah) >= AR5416_EEP_MINOR_VER_2) #define IS_EEP_MINOR_V3(_ah) (EEP_MINOR(_ah) >= AR5416_EEP_MINOR_VER_3) /* Additional Time delay to wait after activiting the Base band */ #define BASE_ACTIVATE_DELAY 100 /* 100 usec */ #define PLL_SETTLE_DELAY 300 /* 300 usec */ #define RTC_PLL_SETTLE_DELAY 1000 /* 1 ms */ static void ar5416InitDMA(struct ath_hal *ah); static void ar5416InitBB(struct ath_hal *ah, HAL_CHANNEL *chan); static void ar5416InitIMR(struct ath_hal *ah, HAL_OPMODE opmode); static void ar5416InitQoS(struct ath_hal *ah); static void ar5416InitUserSettings(struct ath_hal *ah); static HAL_BOOL ar5416SetTransmitPower(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *chan, uint16_t *rfXpdGain); #if 0 static HAL_BOOL ar5416ChannelChange(struct ath_hal *, HAL_CHANNEL *); #endif static void ar5416SetDeltaSlope(struct ath_hal *, HAL_CHANNEL_INTERNAL *); static void ar5416SpurMitigate(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *chan); #ifdef AH_SUPPORT_AR9280 static void ar9280SpurMitigate(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *chan); #endif static HAL_BOOL ar5416SetResetPowerOn(struct ath_hal *ah); static HAL_BOOL ar5416SetReset(struct ath_hal *ah, int type); static void ar5416InitPLL(struct ath_hal *ah, HAL_CHANNEL *chan); static HAL_BOOL ar5416SetBoardValues(struct ath_hal *, HAL_CHANNEL_INTERNAL *); static HAL_BOOL ar5416SetPowerPerRateTable(struct ath_hal *ah, struct ar5416eeprom *pEepData, HAL_CHANNEL_INTERNAL *chan, int16_t *ratesArray, uint16_t cfgCtl, uint16_t AntennaReduction, uint16_t twiceMaxRegulatoryPower, uint16_t powerLimit); static HAL_BOOL ar5416SetPowerCalTable(struct ath_hal *ah, struct ar5416eeprom *pEepData, HAL_CHANNEL_INTERNAL *chan, int16_t *pTxPowerIndexOffset); static uint16_t ar5416GetMaxEdgePower(uint16_t freq, CAL_CTL_EDGES *pRdEdgesPower, HAL_BOOL is2GHz); static void ar5416GetTargetPowers(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *chan, CAL_TARGET_POWER_HT *powInfo, uint16_t numChannels, CAL_TARGET_POWER_HT *pNewPower, uint16_t numRates, HAL_BOOL isHt40Target); static void ar5416GetTargetPowersLeg(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *chan, CAL_TARGET_POWER_LEG *powInfo, uint16_t numChannels, CAL_TARGET_POWER_LEG *pNewPower, uint16_t numRates, HAL_BOOL isExtTarget); static int16_t interpolate(uint16_t target, uint16_t srcLeft, uint16_t srcRight, int16_t targetLeft, int16_t targetRight); static void ar5416Set11nRegs(struct ath_hal *ah, HAL_CHANNEL *chan); static void ar5416GetGainBoundariesAndPdadcs(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *chan, CAL_DATA_PER_FREQ *pRawDataSet, uint8_t * bChans, uint16_t availPiers, uint16_t tPdGainOverlap, int16_t *pMinCalPower, uint16_t * pPdGainBoundaries, uint8_t * pPDADCValues, uint16_t numXpdGains); static HAL_BOOL getLowerUpperIndex(uint8_t target, uint8_t *pList, uint16_t listSize, uint16_t *indexL, uint16_t *indexR); static HAL_BOOL ar5416FillVpdTable(uint8_t pwrMin, uint8_t pwrMax, uint8_t *pPwrList, uint8_t *pVpdList, uint16_t numIntercepts, uint8_t *pRetVpdList); /* * Places the device in and out of reset and then places sane * values in the registers based on EEPROM config, initialization * vectors (as determined by the mode), and station configuration * * bChannelChange is used to preserve DMA/PCU registers across * a HW Reset during channel change. */ HAL_BOOL ar5416Reset(struct ath_hal *ah, HAL_OPMODE opmode, HAL_CHANNEL *chan, HAL_BOOL bChannelChange, HAL_STATUS *status) { #define N(a) (sizeof (a) / sizeof (a[0])) #define FAIL(_code) do { ecode = _code; goto bad; } while (0) struct ath_hal_5212 *ahp = AH5212(ah); HAL_CHANNEL_INTERNAL *ichan; uint32_t softLedCfg; uint32_t saveDefAntenna, saveLedState; uint32_t macStaId1; uint16_t rfXpdGain[2]; u_int modesIndex, freqIndex; HAL_STATUS ecode; int i, regWrites = 0; uint32_t powerVal, rssiThrReg; uint32_t ackTpcPow, ctsTpcPow, chirpTpcPow; OS_MARK(ah, AH_MARK_RESET, bChannelChange); #define IS(_c,_f) (((_c)->channelFlags & _f) || 0) if ((IS(chan, CHANNEL_2GHZ) ^ IS(chan, CHANNEL_5GHZ)) == 0) { HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid channel %u/0x%x; not marked as 2GHz or 5GHz\n", __func__, chan->channel, chan->channelFlags); FAIL(HAL_EINVAL); } if ((IS(chan, CHANNEL_OFDM) ^ IS(chan, CHANNEL_CCK)) == 0) { HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid channel %u/0x%x; not marked as OFDM or CCK\n", __func__, chan->channel, chan->channelFlags); FAIL(HAL_EINVAL); } #undef IS /* Bring out of sleep mode */ if (!ar5416SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE)) { HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip did not wakeup\n", __func__); FAIL(HAL_EIO); } /* * Map public channel to private. */ ichan = ath_hal_checkchannel(ah, chan); if (ichan == AH_NULL) { HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid channel %u/0x%x; no mapping\n", __func__, chan->channel, chan->channelFlags); FAIL(HAL_EINVAL); } else { HALDEBUG(ah, HAL_DEBUG_RESET, "%s: Ch=%u Max=%d Min=%d\n",__func__, ichan->channel, ichan->maxTxPower, ichan->minTxPower); } switch (opmode) { case HAL_M_STA: case HAL_M_IBSS: case HAL_M_HOSTAP: case HAL_M_MONITOR: break; default: HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid operating mode %u\n", __func__, opmode); FAIL(HAL_EINVAL); break; } HALASSERT(AH_PRIVATE(ah)->ah_eeversion >= AR_EEPROM_VER14_1); /* XXX Turn on fast channel change for 5416 */ /* * Preserve the bmiss rssi threshold and count threshold * across resets */ rssiThrReg = OS_REG_READ(ah, AR_RSSI_THR); /* If reg is zero, first time thru set to default val */ if (rssiThrReg == 0) rssiThrReg = INIT_RSSI_THR; /* * Preserve the antenna on a channel change */ saveDefAntenna = OS_REG_READ(ah, AR_DEF_ANTENNA); if (saveDefAntenna == 0) /* XXX magic constants */ saveDefAntenna = 1; /* Save hardware flag before chip reset clears the register */ macStaId1 = OS_REG_READ(ah, AR_STA_ID1) & (AR_STA_ID1_BASE_RATE_11B | AR_STA_ID1_USE_DEFANT); /* Save led state from pci config register */ saveLedState = OS_REG_READ(ah, AR_MAC_LED) & (AR_MAC_LED_ASSOC | AR_MAC_LED_MODE | AR_MAC_LED_BLINK_THRESH_SEL | AR_MAC_LED_BLINK_SLOW); softLedCfg = OS_REG_READ(ah, AR_GPIO_INTR_OUT); /* * Adjust gain parameters before reset if * there's an outstanding gain updated. */ (void) ar5416GetRfgain(ah); if (!ar5416ChipReset(ah, chan)) { HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip reset failed\n", __func__); FAIL(HAL_EIO); } /* Restore bmiss rssi & count thresholds */ OS_REG_WRITE(ah, AR_RSSI_THR, rssiThrReg); /* Setup the indices for the next set of register array writes */ /* XXX Ignore 11n dynamic mode on the AR5416 for the moment */ switch (chan->channelFlags & CHANNEL_ALL) { case CHANNEL_A: case CHANNEL_A_HT20: modesIndex = 1; freqIndex = 1; break; case CHANNEL_T: case CHANNEL_A_HT40PLUS: case CHANNEL_A_HT40MINUS: modesIndex = 2; freqIndex = 1; break; case CHANNEL_PUREG: case CHANNEL_G_HT20: case CHANNEL_B: /* treat as channel G , no B mode suport in owl */ modesIndex = 4; freqIndex = 2; break; case CHANNEL_G_HT40PLUS: case CHANNEL_G_HT40MINUS: modesIndex = 3; freqIndex = 2; break; case CHANNEL_108G: modesIndex = 5; freqIndex = 2; break; default: HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid channel flags 0x%x\n", __func__, chan->channelFlags); FAIL(HAL_EINVAL); } OS_MARK(ah, AH_MARK_RESET_LINE, __LINE__); /* Set correct Baseband to analog shift setting to access analog chips. */ OS_REG_WRITE(ah, AR_PHY(0), 0x00000007); /* * Write addac shifts */ OS_REG_WRITE(ah, AR_PHY_ADC_SERIAL_CTL, AR_PHY_SEL_EXTERNAL_RADIO); #if 0 /* NB: only required for Sowl */ ar5416EepromSetAddac(ah, ichan); #endif regWrites = ath_hal_ini_write(ah, &AH5416(ah)->ah_ini_addac, 1, regWrites); OS_REG_WRITE(ah, AR_PHY_ADC_SERIAL_CTL, AR_PHY_SEL_INTERNAL_ADDAC); /* XXX Merlin ini fixups */ /* XXX Merlin 100us delay for shift registers */ regWrites = ath_hal_ini_write(ah, &ahp->ah_ini_modes, modesIndex, regWrites); #ifdef AH_SUPPORT_AR9280 if (AR_SREV_MERLIN_20_OR_LATER(ah)) { regWrites = ath_hal_ini_write(ah, &AH9280(ah)->ah_ini_rxgain, modesIndex, regWrites); regWrites = ath_hal_ini_write(ah, &AH9280(ah)->ah_ini_txgain, modesIndex, regWrites); } #endif /* XXX Merlin 100us delay for shift registers */ regWrites = ath_hal_ini_write(ah, &ahp->ah_ini_common, 1, regWrites); /* Setup 11n MAC/Phy mode registers */ ar5416Set11nRegs(ah,chan); /* XXX updated regWrites? */ ahp->ah_rfHal->writeRegs(ah, modesIndex, freqIndex, regWrites); #ifdef AH_SUPPORT_AR9280 if (AR_SREV_MERLIN_20(ah) && IS_5GHZ_FAST_CLOCK_EN(ah, chan)) { /* 5GHz channels w/ Fast Clock use different modal values */ regWrites = ath_hal_ini_write(ah, &AH9280(ah)->ah_ini_xmodes, modesIndex, regWrites); } #endif OS_MARK(ah, AH_MARK_RESET_LINE, __LINE__); HALDEBUG(ah, HAL_DEBUG_RESET, ">>>2 %s: AR_PHY_DAG_CTRLCCK=0x%x\n", __func__, OS_REG_READ(ah,AR_PHY_DAG_CTRLCCK)); HALDEBUG(ah, HAL_DEBUG_RESET, ">>>2 %s: AR_PHY_ADC_CTL=0x%x\n", __func__, OS_REG_READ(ah,AR_PHY_ADC_CTL)); /* Set the mute mask to the correct default */ if (AH_PRIVATE(ah)->ah_phyRev >= AR_PHY_CHIP_ID_REV_2) OS_REG_WRITE(ah, AR_SEQ_MASK, 0x0000000F); if (AH_PRIVATE(ah)->ah_phyRev >= AR_PHY_CHIP_ID_REV_3) { /* Clear reg to alllow RX_CLEAR line debug */ OS_REG_WRITE(ah, AR_PHY_BLUETOOTH, 0); } if (AH_PRIVATE(ah)->ah_phyRev >= AR_PHY_CHIP_ID_REV_4) { #ifdef notyet /* Enable burst prefetch for the data queues */ OS_REG_RMW_FIELD(ah, AR_D_FPCTL, ... ); /* Enable double-buffering */ OS_REG_CLR_BIT(ah, AR_TXCFG, AR_TXCFG_DBL_BUF_DIS); #endif } /* Set ADC/DAC select values */ OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL, 0x0e); if (AH5416(ah)->ah_rx_chainmask == 0x5 || AH5416(ah)->ah_tx_chainmask == 0x5) OS_REG_WRITE(ah, AR_PHY_ANALOG_SWAP, AR_PHY_SWAP_ALT_CHAIN); /* Setup Chain Masks */ OS_REG_WRITE(ah, AR_PHY_RX_CHAINMASK, AH5416(ah)->ah_rx_chainmask); OS_REG_WRITE(ah, AR_PHY_CAL_CHAINMASK, AH5416(ah)->ah_rx_chainmask); OS_REG_WRITE(ah, AR_SELFGEN_MASK, AH5416(ah)->ah_tx_chainmask); /* Setup the transmit power values. */ if (!ar5416SetTransmitPower(ah, ichan, rfXpdGain)) { HALDEBUG(ah, HAL_DEBUG_ANY, "%s: error init'ing transmit power\n", __func__); FAIL(HAL_EIO); } /* Write the analog registers */ if (!ahp->ah_rfHal->setRfRegs(ah, ichan, freqIndex, rfXpdGain)) { HALDEBUG(ah, HAL_DEBUG_ANY, "%s: ar5212SetRfRegs failed\n", __func__); FAIL(HAL_EIO); } /* Write delta slope for OFDM enabled modes (A, G, Turbo) */ if (IS_CHAN_OFDM(chan)|| IS_CHAN_HT(chan)) ar5416SetDeltaSlope(ah, ichan); #ifdef AH_SUPPORT_AR9280 if (AR_SREV_MERLIN_10_OR_LATER(ah)) ar9280SpurMitigate(ah, ichan); else #endif ar5416SpurMitigate(ah, ichan); /* Setup board specific options for EEPROM version 3 */ if (!ar5416SetBoardValues(ah, ichan)) { HALDEBUG(ah, HAL_DEBUG_ANY, "%s: error setting board options\n", __func__); FAIL(HAL_EIO); } OS_MARK(ah, AH_MARK_RESET_LINE, __LINE__); OS_REG_WRITE(ah, AR_STA_ID0, LE_READ_4(ahp->ah_macaddr)); OS_REG_WRITE(ah, AR_STA_ID1, LE_READ_2(ahp->ah_macaddr + 4) | macStaId1 | AR_STA_ID1_RTS_USE_DEF | ahp->ah_staId1Defaults ); ar5212SetOperatingMode(ah, opmode); /* Set Venice BSSID mask according to current state */ OS_REG_WRITE(ah, AR_BSSMSKL, LE_READ_4(ahp->ah_bssidmask)); OS_REG_WRITE(ah, AR_BSSMSKU, LE_READ_2(ahp->ah_bssidmask + 4)); /* Restore previous led state */ OS_REG_WRITE(ah, AR_MAC_LED, OS_REG_READ(ah, AR_MAC_LED) | saveLedState); /* Restore soft Led state to GPIO */ OS_REG_WRITE(ah, AR_GPIO_INTR_OUT, softLedCfg); /* Restore previous antenna */ OS_REG_WRITE(ah, AR_DEF_ANTENNA, saveDefAntenna); /* then our BSSID */ OS_REG_WRITE(ah, AR_BSS_ID0, LE_READ_4(ahp->ah_bssid)); OS_REG_WRITE(ah, AR_BSS_ID1, LE_READ_2(ahp->ah_bssid + 4)); /* Restore bmiss rssi & count thresholds */ OS_REG_WRITE(ah, AR_RSSI_THR, ahp->ah_rssiThr); OS_REG_WRITE(ah, AR_ISR, ~0); /* cleared on write */ if (!ar5212SetChannel(ah, ichan)) FAIL(HAL_EIO); OS_MARK(ah, AH_MARK_RESET_LINE, __LINE__); /* Set 1:1 QCU to DCU mapping for all queues */ for (i = 0; i < AR_NUM_DCU; i++) OS_REG_WRITE(ah, AR_DQCUMASK(i), 1 << i); ahp->ah_intrTxqs = 0; for (i = 0; i < AH_PRIVATE(ah)->ah_caps.halTotalQueues; i++) ar5212ResetTxQueue(ah, i); ar5416InitIMR(ah, opmode); ar5212SetCoverageClass(ah, AH_PRIVATE(ah)->ah_coverageClass, 1); ar5416InitQoS(ah); ar5416InitUserSettings(ah); /* * disable seq number generation in hw */ OS_REG_WRITE(ah, AR_STA_ID1, OS_REG_READ(ah, AR_STA_ID1) | AR_STA_ID1_PRESERVE_SEQNUM); ar5416InitDMA(ah); /* * program OBS bus to see MAC interrupts */ OS_REG_WRITE(ah, AR_OBS, 8); #ifdef AR5416_INT_MITIGATION OS_REG_WRITE(ah, AR_MIRT, 0); OS_REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_LAST, 500); OS_REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_FIRST, 2000); #endif ar5416InitBB(ah, chan); /* Setup compression registers */ ar5212SetCompRegs(ah); /* XXX not needed? */ /* * 5416 baseband will check the per rate power table * and select the lower of the two */ ackTpcPow = 63; ctsTpcPow = 63; chirpTpcPow = 63; powerVal = SM(ackTpcPow, AR_TPC_ACK) | SM(ctsTpcPow, AR_TPC_CTS) | SM(chirpTpcPow, AR_TPC_CHIRP); OS_REG_WRITE(ah, AR_TPC, powerVal); if (!ar5416InitCal(ah, chan)) FAIL(HAL_ESELFTEST); AH_PRIVATE(ah)->ah_opmode = opmode; /* record operating mode */ if (bChannelChange) { if (!(ichan->privFlags & CHANNEL_DFS)) ichan->privFlags &= ~CHANNEL_INTERFERENCE; chan->channelFlags = ichan->channelFlags; chan->privFlags = ichan->privFlags; chan->maxRegTxPower = ichan->maxRegTxPower; chan->maxTxPower = ichan->maxTxPower; chan->minTxPower = ichan->minTxPower; } HALDEBUG(ah, HAL_DEBUG_RESET, "%s: done\n", __func__); OS_MARK(ah, AH_MARK_RESET_DONE, 0); return AH_TRUE; bad: OS_MARK(ah, AH_MARK_RESET_DONE, ecode); if (*status) *status = ecode; return AH_FALSE; #undef FAIL #undef N } #if 0 /* * This channel change evaluates whether the selected hardware can * perform a synthesizer-only channel change (no reset). If the * TX is not stopped, or the RFBus cannot be granted in the given * time, the function returns false as a reset is necessary */ HAL_BOOL ar5416ChannelChange(struct ath_hal *ah, HAL_CHANNEL *chan) { uint32_t ulCount; uint32_t data, synthDelay, qnum; uint16_t rfXpdGain[4]; struct ath_hal_5212 *ahp = AH5212(ah); HAL_CHANNEL_INTERNAL *ichan; /* * Map public channel to private. */ ichan = ath_hal_checkchannel(ah, chan); /* TX must be stopped or RF Bus grant will not work */ for (qnum = 0; qnum < AH_PRIVATE(ah)->ah_caps.halTotalQueues; qnum++) { if (ar5212NumTxPending(ah, qnum)) { HALDEBUG(ah, HAL_DEBUG_ANY, "%s: frames pending on queue %d\n", __func__, qnum); return AH_FALSE; } } /* * Kill last Baseband Rx Frame - Request analog bus grant */ OS_REG_WRITE(ah, AR_PHY_RFBUS_REQ, AR_PHY_RFBUS_REQ_REQUEST); if (!ath_hal_wait(ah, AR_PHY_RFBUS_GNT, AR_PHY_RFBUS_GRANT_EN, AR_PHY_RFBUS_GRANT_EN)) { HALDEBUG(ah, HAL_DEBUG_ANY, "%s: could not kill baseband rx\n", __func__); return AH_FALSE; } ar5416Set11nRegs(ah, chan); /* NB: setup 5416-specific regs */ /* Change the synth */ if (!ar5212SetChannel(ah, ichan)) return AH_FALSE; /* Setup the transmit power values. */ if (!ar5416SetTransmitPower(ah, ichan, rfXpdGain)) { HALDEBUG(ah, HAL_DEBUG_ANY, "%s: error init'ing transmit power\n", __func__); return AH_FALSE; } /* * Wait for the frequency synth to settle (synth goes on * via PHY_ACTIVE_EN). Read the phy active delay register. * Value is in 100ns increments. */ data = OS_REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY; if (IS_CHAN_CCK(ichan)) { synthDelay = (4 * data) / 22; } else { synthDelay = data / 10; } OS_DELAY(synthDelay + BASE_ACTIVATE_DELAY); /* Release the RFBus Grant */ OS_REG_WRITE(ah, AR_PHY_RFBUS_REQ, 0); /* Write delta slope for OFDM enabled modes (A, G, Turbo) */ if (IS_CHAN_OFDM(ichan)|| IS_CHAN_HT(chan)) { if (ahp->ah_eeprom.ee_version >= AR_EEPROM_VER5_3 && !IS_CHAN_B(chan)) ar5212SetSpurMitigation(ah, ichan); ar5416SetDeltaSlope(ah, ichan); } /* XXX spur mitigation for Melin */ /* Copy over internal channel flags to public hal channel */ if (!(ichan->privFlags & CHANNEL_DFS)) ichan->privFlags &= ~CHANNEL_INTERFERENCE; chan->channelFlags = ichan->channelFlags; chan->privFlags = ichan->privFlags; chan->maxRegTxPower = ichan->maxRegTxPower; chan->maxTxPower = ichan->maxTxPower; chan->minTxPower = ichan->minTxPower; AH_PRIVATE(ah)->ah_curchan->ah_channel_time=0; AH_PRIVATE(ah)->ah_curchan->ah_tsf_last = ar5212GetTsf64(ah); ar5212TxEnable(ah,AH_TRUE); return AH_TRUE; } #endif static void ar5416InitDMA(struct ath_hal *ah) { /* * set AHB_MODE not to do cacheline prefetches */ OS_REG_SET_BIT(ah, AR_AHB_MODE, AR_AHB_PREFETCH_RD_EN); /* * let mac dma reads be in 128 byte chunks */ OS_REG_WRITE(ah, AR_TXCFG, (OS_REG_READ(ah, AR_TXCFG) & ~AR_TXCFG_DMASZ_MASK) | AR_TXCFG_DMASZ_128B); /* * let mac dma writes be in 128 byte chunks */ OS_REG_WRITE(ah, AR_RXCFG, (OS_REG_READ(ah, AR_RXCFG) & ~AR_RXCFG_DMASZ_MASK) | AR_RXCFG_DMASZ_128B); /* XXX restore TX trigger level */ /* * Setup receive FIFO threshold to hold off TX activities */ OS_REG_WRITE(ah, AR_RXFIFO_CFG, 0x200); /* * reduce the number of usable entries in PCU TXBUF to avoid * wrap around. */ OS_REG_WRITE(ah, AR_PCU_TXBUF_CTRL, AR_PCU_TXBUF_CTRL_USABLE_SIZE); } static void ar5416InitBB(struct ath_hal *ah, HAL_CHANNEL *chan) { uint32_t synthDelay; /* * Wait for the frequency synth to settle (synth goes on * via AR_PHY_ACTIVE_EN). Read the phy active delay register. * Value is in 100ns increments. */ synthDelay = OS_REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY; if (IS_CHAN_CCK(chan)) { synthDelay = (4 * synthDelay) / 22; } else { synthDelay /= 10; } /* Turn on PLL on 5416 */ HALDEBUG(ah, HAL_DEBUG_RESET, "%s %s channel\n", __func__, IS_CHAN_5GHZ(chan) ? "5GHz" : "2GHz"); ar5416InitPLL(ah, chan); /* Activate the PHY (includes baseband activate and synthesizer on) */ OS_REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); /* * If the AP starts the calibration before the base band timeout * completes we could get rx_clear false triggering. Add an * extra BASE_ACTIVATE_DELAY usecs to ensure this condition * does not happen. */ if (IS_CHAN_HALF_RATE(AH_PRIVATE(ah)->ah_curchan)) { OS_DELAY((synthDelay << 1) + BASE_ACTIVATE_DELAY); } else if (IS_CHAN_QUARTER_RATE(AH_PRIVATE(ah)->ah_curchan)) { OS_DELAY((synthDelay << 2) + BASE_ACTIVATE_DELAY); } else { OS_DELAY(synthDelay + BASE_ACTIVATE_DELAY); } } static void ar5416InitIMR(struct ath_hal *ah, HAL_OPMODE opmode) { struct ath_hal_5212 *ahp = AH5212(ah); /* * Setup interrupt handling. Note that ar5212ResetTxQueue * manipulates the secondary IMR's as queues are enabled * and disabled. This is done with RMW ops to insure the * settings we make here are preserved. */ ahp->ah_maskReg = AR_IMR_TXERR | AR_IMR_TXURN | AR_IMR_RXERR | AR_IMR_RXORN | AR_IMR_BCNMISC; #ifdef AR5416_INT_MITIGATION ahp->ah_maskReg |= AR_IMR_TXINTM | AR_IMR_RXINTM | AR_IMR_TXMINTR | AR_IMR_RXMINTR; #else ahp->ah_maskReg |= AR_IMR_TXOK | AR_IMR_RXOK; #endif if (opmode == HAL_M_HOSTAP) ahp->ah_maskReg |= AR_IMR_MIB; OS_REG_WRITE(ah, AR_IMR, ahp->ah_maskReg); /* Enable bus errors that are OR'd to set the HIUERR bit */ #if 0 OS_REG_WRITE(ah, AR_IMR_S2, OS_REG_READ(ah, AR_IMR_S2) | AR_IMR_S2_GTT | AR_IMR_S2_CST); #endif } static void ar5416InitQoS(struct ath_hal *ah) { /* QoS support */ OS_REG_WRITE(ah, AR_QOS_CONTROL, 0x100aa); /* XXX magic */ OS_REG_WRITE(ah, AR_QOS_SELECT, 0x3210); /* XXX magic */ /* Turn on NOACK Support for QoS packets */ OS_REG_WRITE(ah, AR_NOACK, SM(2, AR_NOACK_2BIT_VALUE) | SM(5, AR_NOACK_BIT_OFFSET) | SM(0, AR_NOACK_BYTE_OFFSET)); /* * initialize TXOP for all TIDs */ OS_REG_WRITE(ah, AR_TXOP_X, AR_TXOP_X_VAL); OS_REG_WRITE(ah, AR_TXOP_0_3, 0xFFFFFFFF); OS_REG_WRITE(ah, AR_TXOP_4_7, 0xFFFFFFFF); OS_REG_WRITE(ah, AR_TXOP_8_11, 0xFFFFFFFF); OS_REG_WRITE(ah, AR_TXOP_12_15, 0xFFFFFFFF); } static void ar5416InitUserSettings(struct ath_hal *ah) { struct ath_hal_5212 *ahp = AH5212(ah); /* Restore user-specified settings */ if (ahp->ah_miscMode != 0) OS_REG_WRITE(ah, AR_MISC_MODE, ahp->ah_miscMode); if (ahp->ah_sifstime != (u_int) -1) ar5212SetSifsTime(ah, ahp->ah_sifstime); if (ahp->ah_slottime != (u_int) -1) ar5212SetSlotTime(ah, ahp->ah_slottime); if (ahp->ah_acktimeout != (u_int) -1) ar5212SetAckTimeout(ah, ahp->ah_acktimeout); if (ahp->ah_ctstimeout != (u_int) -1) ar5212SetCTSTimeout(ah, ahp->ah_ctstimeout); if (AH_PRIVATE(ah)->ah_diagreg != 0) OS_REG_WRITE(ah, AR_DIAG_SW, AH_PRIVATE(ah)->ah_diagreg); #if 0 /* XXX Todo */ if (ahp->ah_globaltxtimeout != (u_int) -1) ar5416SetGlobalTxTimeout(ah, ahp->ah_globaltxtimeout); #endif } /* * Places the hardware into reset and then pulls it out of reset */ HAL_BOOL ar5416ChipReset(struct ath_hal *ah, HAL_CHANNEL *chan) { uint32_t rfMode = 0; OS_MARK(ah, AH_MARK_CHIPRESET, chan ? chan->channel : 0); /* * Warm reset is optimistic. */ if (AR_SREV_MERLIN_20_OR_LATER(ah) && ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL)) { if (!ar5416SetResetReg(ah, HAL_RESET_POWER_ON)) return AH_FALSE; } else { if (!ar5416SetResetReg(ah, HAL_RESET_WARM)) return AH_FALSE; } /* Bring out of sleep mode (AGAIN) */ if (!ar5416SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE)) return AH_FALSE; ar5416InitPLL(ah, chan); /* * Perform warm reset before the mode/PLL/turbo registers * are changed in order to deactivate the radio. Mode changes * with an active radio can result in corrupted shifts to the * radio device. */ if (chan != AH_NULL) { /* treat channel B as channel G , no B mode suport in owl */ rfMode |= (IS_CHAN_G(chan) || IS_CHAN_B(chan)) ? AR_PHY_MODE_DYNAMIC : AR_PHY_MODE_OFDM; if (AR_SREV_MERLIN_20(ah) && IS_5GHZ_FAST_CLOCK_EN(ah, chan)) { /* phy mode bits for 5GHz channels require Fast Clock */ rfMode |= AR_PHY_MODE_DYNAMIC | AR_PHY_MODE_DYN_CCK_DISABLE; } else if (!AR_SREV_MERLIN_10_OR_LATER(ah)) { rfMode |= (IS_CHAN_5GHZ(chan)) ? AR_PHY_MODE_RF5GHZ : AR_PHY_MODE_RF2GHZ; } OS_REG_WRITE(ah, AR_PHY_MODE, rfMode); } return AH_TRUE; } /* * Delta slope coefficient computation. * Required for OFDM operation. */ static void ar5416GetDeltaSlopeValues(struct ath_hal *ah, uint32_t coef_scaled, uint32_t *coef_mantissa, uint32_t *coef_exponent) { #define COEF_SCALE_S 24 uint32_t coef_exp, coef_man; /* * ALGO -> coef_exp = 14-floor(log2(coef)); * floor(log2(x)) is the highest set bit position */ for (coef_exp = 31; coef_exp > 0; coef_exp--) if ((coef_scaled >> coef_exp) & 0x1) break; /* A coef_exp of 0 is a legal bit position but an unexpected coef_exp */ HALASSERT(coef_exp); coef_exp = 14 - (coef_exp - COEF_SCALE_S); /* * ALGO -> coef_man = floor(coef* 2^coef_exp+0.5); * The coefficient is already shifted up for scaling */ coef_man = coef_scaled + (1 << (COEF_SCALE_S - coef_exp - 1)); *coef_mantissa = coef_man >> (COEF_SCALE_S - coef_exp); *coef_exponent = coef_exp - 16; #undef COEF_SCALE_S } void ar5416SetDeltaSlope(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *chan) { #define INIT_CLOCKMHZSCALED 0x64000000 uint32_t coef_scaled, ds_coef_exp, ds_coef_man; uint32_t clockMhzScaled = INIT_CLOCKMHZSCALED; CHAN_CENTERS centers; if (IS_CHAN_TURBO(chan)) clockMhzScaled *= 2; /* half and quarter rate can divide the scaled clock by 2 or 4 respectively */ /* scale for selected channel bandwidth */ if (IS_CHAN_HALF_RATE(chan)) { clockMhzScaled = clockMhzScaled >> 1; } else if (IS_CHAN_QUARTER_RATE(chan)) { clockMhzScaled = clockMhzScaled >> 2; } /* * ALGO -> coef = 1e8/fcarrier*fclock/40; * scaled coef to provide precision for this floating calculation */ ar5416GetChannelCenters(ah, chan, ¢ers); coef_scaled = clockMhzScaled / centers.synth_center; ar5416GetDeltaSlopeValues(ah, coef_scaled, &ds_coef_man, &ds_coef_exp); OS_REG_RMW_FIELD(ah, AR_PHY_TIMING3, AR_PHY_TIMING3_DSC_MAN, ds_coef_man); OS_REG_RMW_FIELD(ah, AR_PHY_TIMING3, AR_PHY_TIMING3_DSC_EXP, ds_coef_exp); /* * For Short GI, * scaled coeff is 9/10 that of normal coeff */ coef_scaled = (9 * coef_scaled)/10; ar5416GetDeltaSlopeValues(ah, coef_scaled, &ds_coef_man, &ds_coef_exp); /* for short gi */ OS_REG_RMW_FIELD(ah, AR_PHY_HALFGI, AR_PHY_HALFGI_DSC_MAN, ds_coef_man); OS_REG_RMW_FIELD(ah, AR_PHY_HALFGI, AR_PHY_HALFGI_DSC_EXP, ds_coef_exp); #undef INIT_CLOCKMHZSCALED } /* * Convert to baseband spur frequency given input channel frequency * and compute register settings below. */ #define SPUR_RSSI_THRESH 40 static void ar5416SpurMitigate(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *chan) { static const int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8, AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60 }; static const int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10, AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60 }; static const int inc[4] = { 0, 100, 0, 0 }; int bb_spur = AR_NO_SPUR; int bin, cur_bin; int spur_freq_sd; int spur_delta_phase; int denominator; int upper, lower, cur_vit_mask; int tmp, new; int i; int8_t mask_m[123]; int8_t mask_p[123]; int8_t mask_amt; int tmp_mask; int cur_bb_spur; HAL_BOOL is2GHz = IS_CHAN_2GHZ(chan); OS_MEMZERO(mask_m, sizeof(mask_m)); OS_MEMZERO(mask_p, sizeof(mask_p)); /* * Need to verify range +/- 9.5 for static ht20, otherwise spur * is out-of-band and can be ignored. */ for (i = 0; i < AR5416_EEPROM_MODAL_SPURS; i++) { cur_bb_spur = ath_hal_getSpurChan(ah, i, is2GHz); if (AR_NO_SPUR == cur_bb_spur) break; cur_bb_spur = cur_bb_spur - (chan->channel * 10); if ((cur_bb_spur > -95) && (cur_bb_spur < 95)) { bb_spur = cur_bb_spur; break; } } if (AR_NO_SPUR == bb_spur) return; bin = bb_spur * 32; tmp = OS_REG_READ(ah, AR_PHY_TIMING_CTRL4_CHAIN(0)); new = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI | AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER | AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK | AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK); OS_REG_WRITE(ah, AR_PHY_TIMING_CTRL4_CHAIN(0), new); new = (AR_PHY_SPUR_REG_MASK_RATE_CNTL | AR_PHY_SPUR_REG_ENABLE_MASK_PPM | AR_PHY_SPUR_REG_MASK_RATE_SELECT | AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI | SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH)); OS_REG_WRITE(ah, AR_PHY_SPUR_REG, new); /* * Should offset bb_spur by +/- 10 MHz for dynamic 2040 MHz * config, no offset for HT20. * spur_delta_phase = bb_spur/40 * 2**21 for static ht20, * /80 for dyn2040. */ spur_delta_phase = ((bb_spur * 524288) / 100) & AR_PHY_TIMING11_SPUR_DELTA_PHASE; /* * in 11A mode the denominator of spur_freq_sd should be 40 and * it should be 44 in 11G */ denominator = IS_CHAN_2GHZ(chan) ? 440 : 400; spur_freq_sd = ((bb_spur * 2048) / denominator) & 0x3ff; new = (AR_PHY_TIMING11_USE_SPUR_IN_AGC | SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) | SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE)); OS_REG_WRITE(ah, AR_PHY_TIMING11, new); /* * ============================================ * pilot mask 1 [31:0] = +6..-26, no 0 bin * pilot mask 2 [19:0] = +26..+7 * * channel mask 1 [31:0] = +6..-26, no 0 bin * channel mask 2 [19:0] = +26..+7 */ //cur_bin = -26; cur_bin = -6000; upper = bin + 100; lower = bin - 100; for (i = 0; i < 4; i++) { int pilot_mask = 0; int chan_mask = 0; int bp = 0; for (bp = 0; bp < 30; bp++) { if ((cur_bin > lower) && (cur_bin < upper)) { pilot_mask = pilot_mask | 0x1 << bp; chan_mask = chan_mask | 0x1 << bp; } cur_bin += 100; } cur_bin += inc[i]; OS_REG_WRITE(ah, pilot_mask_reg[i], pilot_mask); OS_REG_WRITE(ah, chan_mask_reg[i], chan_mask); } /* ================================================= * viterbi mask 1 based on channel magnitude * four levels 0-3 * - mask (-27 to 27) (reg 64,0x9900 to 67,0x990c) * [1 2 2 1] for -9.6 or [1 2 1] for +16 * - enable_mask_ppm, all bins move with freq * * - mask_select, 8 bits for rates (reg 67,0x990c) * - mask_rate_cntl, 8 bits for rates (reg 67,0x990c) * choose which mask to use mask or mask2 */ /* * viterbi mask 2 2nd set for per data rate puncturing * four levels 0-3 * - mask_select, 8 bits for rates (reg 67) * - mask (-27 to 27) (reg 98,0x9988 to 101,0x9994) * [1 2 2 1] for -9.6 or [1 2 1] for +16 */ cur_vit_mask = 6100; upper = bin + 120; lower = bin - 120; for (i = 0; i < 123; i++) { if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) { if ((abs(cur_vit_mask - bin)) < 75) { mask_amt = 1; } else { mask_amt = 0; } if (cur_vit_mask < 0) { mask_m[abs(cur_vit_mask / 100)] = mask_amt; } else { mask_p[cur_vit_mask / 100] = mask_amt; } } cur_vit_mask -= 100; } tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28) | (mask_m[48] << 26) | (mask_m[49] << 24) | (mask_m[50] << 22) | (mask_m[51] << 20) | (mask_m[52] << 18) | (mask_m[53] << 16) | (mask_m[54] << 14) | (mask_m[55] << 12) | (mask_m[56] << 10) | (mask_m[57] << 8) | (mask_m[58] << 6) | (mask_m[59] << 4) | (mask_m[60] << 2) | (mask_m[61] << 0); OS_REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask); OS_REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask); tmp_mask = (mask_m[31] << 28) | (mask_m[32] << 26) | (mask_m[33] << 24) | (mask_m[34] << 22) | (mask_m[35] << 20) | (mask_m[36] << 18) | (mask_m[37] << 16) | (mask_m[48] << 14) | (mask_m[39] << 12) | (mask_m[40] << 10) | (mask_m[41] << 8) | (mask_m[42] << 6) | (mask_m[43] << 4) | (mask_m[44] << 2) | (mask_m[45] << 0); OS_REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask); OS_REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask); tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28) | (mask_m[18] << 26) | (mask_m[18] << 24) | (mask_m[20] << 22) | (mask_m[20] << 20) | (mask_m[22] << 18) | (mask_m[22] << 16) | (mask_m[24] << 14) | (mask_m[24] << 12) | (mask_m[25] << 10) | (mask_m[26] << 8) | (mask_m[27] << 6) | (mask_m[28] << 4) | (mask_m[29] << 2) | (mask_m[30] << 0); OS_REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask); OS_REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask); tmp_mask = (mask_m[ 0] << 30) | (mask_m[ 1] << 28) | (mask_m[ 2] << 26) | (mask_m[ 3] << 24) | (mask_m[ 4] << 22) | (mask_m[ 5] << 20) | (mask_m[ 6] << 18) | (mask_m[ 7] << 16) | (mask_m[ 8] << 14) | (mask_m[ 9] << 12) | (mask_m[10] << 10) | (mask_m[11] << 8) | (mask_m[12] << 6) | (mask_m[13] << 4) | (mask_m[14] << 2) | (mask_m[15] << 0); OS_REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask); OS_REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask); tmp_mask = (mask_p[15] << 28) | (mask_p[14] << 26) | (mask_p[13] << 24) | (mask_p[12] << 22) | (mask_p[11] << 20) | (mask_p[10] << 18) | (mask_p[ 9] << 16) | (mask_p[ 8] << 14) | (mask_p[ 7] << 12) | (mask_p[ 6] << 10) | (mask_p[ 5] << 8) | (mask_p[ 4] << 6) | (mask_p[ 3] << 4) | (mask_p[ 2] << 2) | (mask_p[ 1] << 0); OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask); OS_REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask); tmp_mask = (mask_p[30] << 28) | (mask_p[29] << 26) | (mask_p[28] << 24) | (mask_p[27] << 22) | (mask_p[26] << 20) | (mask_p[25] << 18) | (mask_p[24] << 16) | (mask_p[23] << 14) | (mask_p[22] << 12) | (mask_p[21] << 10) | (mask_p[20] << 8) | (mask_p[19] << 6) | (mask_p[18] << 4) | (mask_p[17] << 2) | (mask_p[16] << 0); OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask); OS_REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask); tmp_mask = (mask_p[45] << 28) | (mask_p[44] << 26) | (mask_p[43] << 24) | (mask_p[42] << 22) | (mask_p[41] << 20) | (mask_p[40] << 18) | (mask_p[39] << 16) | (mask_p[38] << 14) | (mask_p[37] << 12) | (mask_p[36] << 10) | (mask_p[35] << 8) | (mask_p[34] << 6) | (mask_p[33] << 4) | (mask_p[32] << 2) | (mask_p[31] << 0); OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask); OS_REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask); tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28) | (mask_p[59] << 26) | (mask_p[58] << 24) | (mask_p[57] << 22) | (mask_p[56] << 20) | (mask_p[55] << 18) | (mask_p[54] << 16) | (mask_p[53] << 14) | (mask_p[52] << 12) | (mask_p[51] << 10) | (mask_p[50] << 8) | (mask_p[49] << 6) | (mask_p[48] << 4) | (mask_p[47] << 2) | (mask_p[46] << 0); OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask); OS_REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask); } #ifdef AH_SUPPORT_AR9280 #define AR_BASE_FREQ_2GHZ 2300 #define AR_BASE_FREQ_5GHZ 4900 #define AR_SPUR_FEEQ_BOUND_HT40 19 #define AR_SPUR_FEEQ_BOUND_HT20 10 static void ar9280SpurMitigate(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *ichan) { static const int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8, AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60 }; static const int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10, AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60 }; static int inc[4] = { 0, 100, 0, 0 }; int bb_spur = AR_NO_SPUR; int freq; int bin, cur_bin; int bb_spur_off, spur_subchannel_sd; int spur_freq_sd; int spur_delta_phase; int denominator; int upper, lower, cur_vit_mask; int tmp, newVal; int i; CHAN_CENTERS centers; int8_t mask_m[123]; int8_t mask_p[123]; int8_t mask_amt; int tmp_mask; int cur_bb_spur; HAL_BOOL is2GHz = IS_CHAN_2GHZ(ichan); OS_MEMZERO(&mask_m, sizeof(int8_t) * 123); OS_MEMZERO(&mask_p, sizeof(int8_t) * 123); ar5416GetChannelCenters(ah, ichan, ¢ers); freq = centers.synth_center; /* * Need to verify range +/- 9.38 for static ht20 and +/- 18.75 for ht40, * otherwise spur is out-of-band and can be ignored. */ for (i = 0; i < AR5416_EEPROM_MODAL_SPURS; i++) { cur_bb_spur = ath_hal_getSpurChan(ah, i, is2GHz); /* Get actual spur freq in MHz from EEPROM read value */ if (is2GHz) { cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_2GHZ; } else { cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_5GHZ; } if (AR_NO_SPUR == cur_bb_spur) break; cur_bb_spur = cur_bb_spur - freq; if (IS_CHAN_HT40(ichan)) { if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT40) && (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT40)) { bb_spur = cur_bb_spur; break; } } else if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT20) && (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT20)) { bb_spur = cur_bb_spur; break; } } if (AR_NO_SPUR == bb_spur) { #if 1 /* * MRC CCK can interfere with beacon detection and cause deaf/mute. * Disable MRC CCK for now. */ OS_REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK, AR_PHY_FORCE_CLKEN_CCK_MRC_MUX); #else /* Enable MRC CCK if no spur is found in this channel. */ OS_REG_SET_BIT(ah, AR_PHY_FORCE_CLKEN_CCK, AR_PHY_FORCE_CLKEN_CCK_MRC_MUX); #endif return; } else { /* * For Merlin, spur can break CCK MRC algorithm. Disable CCK MRC if spur * is found in this channel. */ OS_REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK, AR_PHY_FORCE_CLKEN_CCK_MRC_MUX); } bin = bb_spur * 320; tmp = OS_REG_READ(ah, AR_PHY_TIMING_CTRL4_CHAIN(0)); newVal = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI | AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER | AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK | AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK); OS_REG_WRITE(ah, AR_PHY_TIMING_CTRL4_CHAIN(0), newVal); newVal = (AR_PHY_SPUR_REG_MASK_RATE_CNTL | AR_PHY_SPUR_REG_ENABLE_MASK_PPM | AR_PHY_SPUR_REG_MASK_RATE_SELECT | AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI | SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH)); OS_REG_WRITE(ah, AR_PHY_SPUR_REG, newVal); /* Pick control or extn channel to cancel the spur */ if (IS_CHAN_HT40(ichan)) { if (bb_spur < 0) { spur_subchannel_sd = 1; bb_spur_off = bb_spur + 10; } else { spur_subchannel_sd = 0; bb_spur_off = bb_spur - 10; } } else { spur_subchannel_sd = 0; bb_spur_off = bb_spur; } /* * spur_delta_phase = bb_spur/40 * 2**21 for static ht20, * /80 for dyn2040. */ if (IS_CHAN_HT40(ichan)) spur_delta_phase = ((bb_spur * 262144) / 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE; else spur_delta_phase = ((bb_spur * 524288) / 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE; /* * in 11A mode the denominator of spur_freq_sd should be 40 and * it should be 44 in 11G */ denominator = IS_CHAN_2GHZ(ichan) ? 44 : 40; spur_freq_sd = ((bb_spur_off * 2048) / denominator) & 0x3ff; newVal = (AR_PHY_TIMING11_USE_SPUR_IN_AGC | SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) | SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE)); OS_REG_WRITE(ah, AR_PHY_TIMING11, newVal); /* Choose to cancel between control and extension channels */ newVal = spur_subchannel_sd << AR_PHY_SFCORR_SPUR_SUBCHNL_SD_S; OS_REG_WRITE(ah, AR_PHY_SFCORR_EXT, newVal); /* * ============================================ * Set Pilot and Channel Masks * * pilot mask 1 [31:0] = +6..-26, no 0 bin * pilot mask 2 [19:0] = +26..+7 * * channel mask 1 [31:0] = +6..-26, no 0 bin * channel mask 2 [19:0] = +26..+7 */ cur_bin = -6000; upper = bin + 100; lower = bin - 100; for (i = 0; i < 4; i++) { int pilot_mask = 0; int chan_mask = 0; int bp = 0; for (bp = 0; bp < 30; bp++) { if ((cur_bin > lower) && (cur_bin < upper)) { pilot_mask = pilot_mask | 0x1 << bp; chan_mask = chan_mask | 0x1 << bp; } cur_bin += 100; } cur_bin += inc[i]; OS_REG_WRITE(ah, pilot_mask_reg[i], pilot_mask); OS_REG_WRITE(ah, chan_mask_reg[i], chan_mask); } /* ================================================= * viterbi mask 1 based on channel magnitude * four levels 0-3 * - mask (-27 to 27) (reg 64,0x9900 to 67,0x990c) * [1 2 2 1] for -9.6 or [1 2 1] for +16 * - enable_mask_ppm, all bins move with freq * * - mask_select, 8 bits for rates (reg 67,0x990c) * - mask_rate_cntl, 8 bits for rates (reg 67,0x990c) * choose which mask to use mask or mask2 */ /* * viterbi mask 2 2nd set for per data rate puncturing * four levels 0-3 * - mask_select, 8 bits for rates (reg 67) * - mask (-27 to 27) (reg 98,0x9988 to 101,0x9994) * [1 2 2 1] for -9.6 or [1 2 1] for +16 */ cur_vit_mask = 6100; upper = bin + 120; lower = bin - 120; for (i = 0; i < 123; i++) { if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) { if ((abs(cur_vit_mask - bin)) < 75) { mask_amt = 1; } else { mask_amt = 0; } if (cur_vit_mask < 0) { mask_m[abs(cur_vit_mask / 100)] = mask_amt; } else { mask_p[cur_vit_mask / 100] = mask_amt; } } cur_vit_mask -= 100; } tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28) | (mask_m[48] << 26) | (mask_m[49] << 24) | (mask_m[50] << 22) | (mask_m[51] << 20) | (mask_m[52] << 18) | (mask_m[53] << 16) | (mask_m[54] << 14) | (mask_m[55] << 12) | (mask_m[56] << 10) | (mask_m[57] << 8) | (mask_m[58] << 6) | (mask_m[59] << 4) | (mask_m[60] << 2) | (mask_m[61] << 0); OS_REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask); OS_REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask); tmp_mask = (mask_m[31] << 28) | (mask_m[32] << 26) | (mask_m[33] << 24) | (mask_m[34] << 22) | (mask_m[35] << 20) | (mask_m[36] << 18) | (mask_m[37] << 16) | (mask_m[48] << 14) | (mask_m[39] << 12) | (mask_m[40] << 10) | (mask_m[41] << 8) | (mask_m[42] << 6) | (mask_m[43] << 4) | (mask_m[44] << 2) | (mask_m[45] << 0); OS_REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask); OS_REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask); tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28) | (mask_m[18] << 26) | (mask_m[18] << 24) | (mask_m[20] << 22) | (mask_m[20] << 20) | (mask_m[22] << 18) | (mask_m[22] << 16) | (mask_m[24] << 14) | (mask_m[24] << 12) | (mask_m[25] << 10) | (mask_m[26] << 8) | (mask_m[27] << 6) | (mask_m[28] << 4) | (mask_m[29] << 2) | (mask_m[30] << 0); OS_REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask); OS_REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask); tmp_mask = (mask_m[ 0] << 30) | (mask_m[ 1] << 28) | (mask_m[ 2] << 26) | (mask_m[ 3] << 24) | (mask_m[ 4] << 22) | (mask_m[ 5] << 20) | (mask_m[ 6] << 18) | (mask_m[ 7] << 16) | (mask_m[ 8] << 14) | (mask_m[ 9] << 12) | (mask_m[10] << 10) | (mask_m[11] << 8) | (mask_m[12] << 6) | (mask_m[13] << 4) | (mask_m[14] << 2) | (mask_m[15] << 0); OS_REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask); OS_REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask); tmp_mask = (mask_p[15] << 28) | (mask_p[14] << 26) | (mask_p[13] << 24) | (mask_p[12] << 22) | (mask_p[11] << 20) | (mask_p[10] << 18) | (mask_p[ 9] << 16) | (mask_p[ 8] << 14) | (mask_p[ 7] << 12) | (mask_p[ 6] << 10) | (mask_p[ 5] << 8) | (mask_p[ 4] << 6) | (mask_p[ 3] << 4) | (mask_p[ 2] << 2) | (mask_p[ 1] << 0); OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask); OS_REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask); tmp_mask = (mask_p[30] << 28) | (mask_p[29] << 26) | (mask_p[28] << 24) | (mask_p[27] << 22) | (mask_p[26] << 20) | (mask_p[25] << 18) | (mask_p[24] << 16) | (mask_p[23] << 14) | (mask_p[22] << 12) | (mask_p[21] << 10) | (mask_p[20] << 8) | (mask_p[19] << 6) | (mask_p[18] << 4) | (mask_p[17] << 2) | (mask_p[16] << 0); OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask); OS_REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask); tmp_mask = (mask_p[45] << 28) | (mask_p[44] << 26) | (mask_p[43] << 24) | (mask_p[42] << 22) | (mask_p[41] << 20) | (mask_p[40] << 18) | (mask_p[39] << 16) | (mask_p[38] << 14) | (mask_p[37] << 12) | (mask_p[36] << 10) | (mask_p[35] << 8) | (mask_p[34] << 6) | (mask_p[33] << 4) | (mask_p[32] << 2) | (mask_p[31] << 0); OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask); OS_REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask); tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28) | (mask_p[59] << 26) | (mask_p[58] << 24) | (mask_p[57] << 22) | (mask_p[56] << 20) | (mask_p[55] << 18) | (mask_p[54] << 16) | (mask_p[53] << 14) | (mask_p[52] << 12) | (mask_p[51] << 10) | (mask_p[50] << 8) | (mask_p[49] << 6) | (mask_p[48] << 4) | (mask_p[47] << 2) | (mask_p[46] << 0); OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask); OS_REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask); } #endif /* AH_SUPPORT_AR9280 */ /* * Set a limit on the overall output power. Used for dynamic * transmit power control and the like. * * NB: limit is in units of 0.5 dbM. */ HAL_BOOL ar5416SetTxPowerLimit(struct ath_hal *ah, uint32_t limit) { uint16_t dummyXpdGains[2]; AH_PRIVATE(ah)->ah_powerLimit = AH_MIN(limit, MAX_RATE_POWER); return ar5416SetTransmitPower(ah, AH_PRIVATE(ah)->ah_curchan, dummyXpdGains); } HAL_BOOL ar5416GetChipPowerLimits(struct ath_hal *ah, HAL_CHANNEL *chans, uint32_t nchans) { struct ath_hal_5212 *ahp = AH5212(ah); int16_t minPower, maxPower; HAL_CHANNEL *chan; int i; /* * Get Pier table max and min powers. */ for (i = 0; i < nchans; i++) { chan = &chans[i]; if (ahp->ah_rfHal->getChannelMaxMinPower(ah, chan, &maxPower, &minPower)) { /* NB: rf code returns 1/4 dBm units, convert */ chan->maxTxPower = maxPower / 2; chan->minTxPower = minPower / 2; } else { HALDEBUG(ah, HAL_DEBUG_ANY, "%s: no min/max power for %u/0x%x\n", __func__, chan->channel, chan->channelFlags); chan->maxTxPower = AR5416_MAX_RATE_POWER; chan->minTxPower = 0; } } #ifdef AH_DEBUG for (i=0; iah_eeprom; struct ar5416eeprom *pEepData = &ee->ee_base; HALASSERT(AH_PRIVATE(ah)->ah_eeversion >= AR_EEPROM_VER14_1); /* Setup info for the actual eeprom */ ath_hal_memzero(ratesArray, sizeof(ratesArray)); cfgCtl = ath_hal_getctl(ah, (HAL_CHANNEL *)chan); powerLimit = chan->maxRegTxPower * 2; twiceAntennaReduction = chan->antennaMax; twiceMaxRegulatoryPower = AH_MIN(MAX_RATE_POWER, AH_PRIVATE(ah)->ah_powerLimit); pModal = &pEepData->modalHeader[IS_CHAN_2GHZ(chan)]; HALDEBUG(ah, HAL_DEBUG_RESET, "%s Channel=%u CfgCtl=%u\n", __func__,chan->channel, cfgCtl ); if (IS_EEP_MINOR_V2(ah)) { ht40PowerIncForPdadc = pModal->ht40PowerIncForPdadc; } if (!ar5416SetPowerPerRateTable(ah, pEepData, chan, &ratesArray[0],cfgCtl, twiceAntennaReduction, twiceMaxRegulatoryPower, powerLimit)) { HALDEBUG(ah, HAL_DEBUG_ANY, "%s: unable to set tx power per rate table\n", __func__); return AH_FALSE; } if (!ar5416SetPowerCalTable(ah, pEepData, chan, &txPowerIndexOffset)) { HALDEBUG(ah, HAL_DEBUG_ANY, "%s: unable to set power table\n", __func__); return AH_FALSE; } maxPower = AH_MAX(ratesArray[rate6mb], ratesArray[rateHt20_0]); if (IS_CHAN_2GHZ(chan)) { maxPower = AH_MAX(maxPower, ratesArray[rate1l]); } if (IS_CHAN_HT40(chan)) { maxPower = AH_MAX(maxPower, ratesArray[rateHt40_0]); } ahp->ah_tx6PowerInHalfDbm = maxPower; AH_PRIVATE(ah)->ah_maxPowerLevel = maxPower; ahp->ah_txPowerIndexOffset = txPowerIndexOffset; /* * txPowerIndexOffset is set by the SetPowerTable() call - * adjust the rate table (0 offset if rates EEPROM not loaded) */ for (i = 0; i < N(ratesArray); i++) { ratesArray[i] = (int16_t)(txPowerIndexOffset + ratesArray[i]); if (ratesArray[i] > AR5416_MAX_RATE_POWER) ratesArray[i] = AR5416_MAX_RATE_POWER; } #ifdef AH_EEPROM_DUMP ar5416PrintPowerPerRate(ah, ratesArray); #endif /* Write the OFDM power per rate set */ OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE1, POW_SM(ratesArray[rate18mb], 24) | POW_SM(ratesArray[rate12mb], 16) | POW_SM(ratesArray[rate9mb], 8) | POW_SM(ratesArray[rate6mb], 0) ); OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE2, POW_SM(ratesArray[rate54mb], 24) | POW_SM(ratesArray[rate48mb], 16) | POW_SM(ratesArray[rate36mb], 8) | POW_SM(ratesArray[rate24mb], 0) ); if (IS_CHAN_2GHZ(chan)) { /* Write the CCK power per rate set */ OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE3, POW_SM(ratesArray[rate2s], 24) | POW_SM(ratesArray[rate2l], 16) | POW_SM(ratesArray[rateXr], 8) /* XR target power */ | POW_SM(ratesArray[rate1l], 0) ); OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE4, POW_SM(ratesArray[rate11s], 24) | POW_SM(ratesArray[rate11l], 16) | POW_SM(ratesArray[rate5_5s], 8) | POW_SM(ratesArray[rate5_5l], 0) ); HALDEBUG(ah, HAL_DEBUG_RESET, "%s AR_PHY_POWER_TX_RATE3=0x%x AR_PHY_POWER_TX_RATE4=0x%x\n", __func__, OS_REG_READ(ah,AR_PHY_POWER_TX_RATE3), OS_REG_READ(ah,AR_PHY_POWER_TX_RATE4)); } /* Write the HT20 power per rate set */ OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE5, POW_SM(ratesArray[rateHt20_3], 24) | POW_SM(ratesArray[rateHt20_2], 16) | POW_SM(ratesArray[rateHt20_1], 8) | POW_SM(ratesArray[rateHt20_0], 0) ); OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE6, POW_SM(ratesArray[rateHt20_7], 24) | POW_SM(ratesArray[rateHt20_6], 16) | POW_SM(ratesArray[rateHt20_5], 8) | POW_SM(ratesArray[rateHt20_4], 0) ); if (IS_CHAN_HT40(chan)) { /* Write the HT40 power per rate set */ /* Correct PAR difference between HT40 and HT20/LEGACY */ OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE7, POW_SM(ratesArray[rateHt40_3] + ht40PowerIncForPdadc, 24) | POW_SM(ratesArray[rateHt40_2] + ht40PowerIncForPdadc, 16) | POW_SM(ratesArray[rateHt40_1] + ht40PowerIncForPdadc, 8) | POW_SM(ratesArray[rateHt40_0] + ht40PowerIncForPdadc, 0) ); OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE8, POW_SM(ratesArray[rateHt40_7] + ht40PowerIncForPdadc, 24) | POW_SM(ratesArray[rateHt40_6] + ht40PowerIncForPdadc, 16) | POW_SM(ratesArray[rateHt40_5] + ht40PowerIncForPdadc, 8) | POW_SM(ratesArray[rateHt40_4] + ht40PowerIncForPdadc, 0) ); /* Write the Dup/Ext 40 power per rate set */ OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE9, POW_SM(ratesArray[rateExtOfdm], 24) | POW_SM(ratesArray[rateExtCck], 16) | POW_SM(ratesArray[rateDupOfdm], 8) | POW_SM(ratesArray[rateDupCck], 0) ); } /* Write the Power subtraction for dynamic chain changing, for per-packet powertx */ OS_REG_WRITE(ah, AR_PHY_POWER_TX_SUB, POW_SM(pModal->pwrDecreaseFor3Chain, 6) | POW_SM(pModal->pwrDecreaseFor2Chain, 0) ); return AH_TRUE; #undef POW_SM #undef N } /* * Exported call to check for a recent gain reading and return * the current state of the thermal calibration gain engine. */ HAL_RFGAIN ar5416GetRfgain(struct ath_hal *ah) { return HAL_RFGAIN_INACTIVE; } /* * Places all of hardware into reset */ HAL_BOOL ar5416Disable(struct ath_hal *ah) { if (!ar5212SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE)) return AH_FALSE; return ar5416SetResetReg(ah, HAL_RESET_COLD); } /* * Places the PHY and Radio chips into reset. A full reset * must be called to leave this state. The PCI/MAC/PCU are * not placed into reset as we must receive interrupt to * re-enable the hardware. */ HAL_BOOL ar5416PhyDisable(struct ath_hal *ah) { return ar5416SetResetReg(ah, HAL_RESET_WARM); } /* * Write the given reset bit mask into the reset register */ HAL_BOOL ar5416SetResetReg(struct ath_hal *ah, uint32_t type) { /* * Set force wake */ OS_REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_EN | AR_RTC_FORCE_WAKE_ON_INT); switch (type) { case HAL_RESET_POWER_ON: return ar5416SetResetPowerOn(ah); break; case HAL_RESET_WARM: case HAL_RESET_COLD: return ar5416SetReset(ah, type); break; default: return AH_FALSE; } } static HAL_BOOL ar5416SetResetPowerOn(struct ath_hal *ah) { /* Power On Reset (Hard Reset) */ /* * Set force wake * * If the MAC was running, previously calling * reset will wake up the MAC but it may go back to sleep * before we can start polling. * Set force wake stops that * This must be called before initiating a hard reset. */ OS_REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_EN | AR_RTC_FORCE_WAKE_ON_INT); /* * RTC reset and clear */ OS_REG_WRITE(ah, AR_RTC_RESET, 0); OS_DELAY(20); OS_REG_WRITE(ah, AR_RTC_RESET, 1); /* * Poll till RTC is ON */ if (!ath_hal_wait(ah, AR_RTC_STATUS, AR_RTC_PM_STATUS_M, AR_RTC_STATUS_ON)) { HALDEBUG(ah, HAL_DEBUG_ANY, "%s: RTC not waking up\n", __func__); return AH_FALSE; } return ar5416SetReset(ah, HAL_RESET_COLD); } static HAL_BOOL ar5416SetReset(struct ath_hal *ah, int type) { uint32_t tmpReg; /* * Force wake */ OS_REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_EN | AR_RTC_FORCE_WAKE_ON_INT); /* * Reset AHB */ tmpReg = OS_REG_READ(ah, AR_INTR_SYNC_CAUSE); if (tmpReg & (AR_INTR_SYNC_LOCAL_TIMEOUT|AR_INTR_SYNC_RADM_CPL_TIMEOUT)) { OS_REG_WRITE(ah, AR_INTR_SYNC_ENABLE, 0); OS_REG_WRITE(ah, AR_RC, AR_RC_AHB|AR_RC_HOSTIF); } else { OS_REG_WRITE(ah, AR_RC, AR_RC_AHB); } /* * Set Mac(BB,Phy) Warm Reset */ switch (type) { case HAL_RESET_WARM: OS_REG_WRITE(ah, AR_RTC_RC, AR_RTC_RC_MAC_WARM); break; case HAL_RESET_COLD: OS_REG_WRITE(ah, AR_RTC_RC, AR_RTC_RC_MAC_WARM|AR_RTC_RC_MAC_COLD); break; default: HALASSERT(0); break; } /* * Clear resets and force wakeup */ OS_REG_WRITE(ah, AR_RTC_RC, 0); if (!ath_hal_wait(ah, AR_RTC_RC, AR_RTC_RC_M, 0)) { HALDEBUG(ah, HAL_DEBUG_ANY, "%s: RTC stuck in MAC reset\n", __func__); return AH_FALSE; } /* Clear AHB reset */ OS_REG_WRITE(ah, AR_RC, 0); /* Set register and descriptor swapping on * Bigendian platforms on cold reset */ #ifdef __BIG_ENDIAN__ if (type == HAL_RESET_COLD) { uint32_t mask; HALDEBUG(ah, HAL_DEBUG_RESET, "%s Applying descriptor swap\n", __func__); mask = INIT_CONFIG_STATUS | AR_CFG_SWRD | AR_CFG_SWRG; #ifndef AH_NEED_DESC_SWAP mask |= AR_CFG_SWTD; #endif OS_REG_WRITE(ah, AR_CFG, LE_READ_4(&mask)); } #endif ar5416InitPLL(ah, AH_NULL); return AH_TRUE; } #ifndef IS_5GHZ_FAST_CLOCK_EN #define IS_5GHZ_FAST_CLOCK_EN(ah, chan) AH_FALSE #endif static void ar5416InitPLL(struct ath_hal *ah, HAL_CHANNEL *chan) { uint32_t pll; if (AR_SREV_MERLIN_10_OR_LATER(ah)) { pll = SM(0x5, AR_RTC_SOWL_PLL_REFDIV); if (chan != AH_NULL && IS_CHAN_HALF_RATE(chan)) { pll |= SM(0x1, AR_RTC_SOWL_PLL_CLKSEL); } else if (chan && IS_CHAN_QUARTER_RATE(chan)) { pll |= SM(0x2, AR_RTC_SOWL_PLL_CLKSEL); } if (chan != AH_NULL && IS_CHAN_5GHZ(chan)) { pll |= SM(0x28, AR_RTC_SOWL_PLL_DIV); /* * PLL WAR for Merlin 2.0/2.1 * When doing fast clock, set PLL to 0x142c * Else, set PLL to 0x2850 to prevent reset-to-reset variation */ if (AR_SREV_MERLIN_20(ah)) { if (IS_5GHZ_FAST_CLOCK_EN(ah, chan)) { pll = 0x142c; } else { pll = 0x2850; } } } else { pll |= SM(0x2c, AR_RTC_SOWL_PLL_DIV); } } else if (AR_SREV_SOWL_10_OR_LATER(ah)) { pll = SM(0x5, AR_RTC_SOWL_PLL_REFDIV); if (chan != AH_NULL && IS_CHAN_HALF_RATE(chan)) { pll |= SM(0x1, AR_RTC_SOWL_PLL_CLKSEL); } else if (chan && IS_CHAN_QUARTER_RATE(chan)) { pll |= SM(0x2, AR_RTC_SOWL_PLL_CLKSEL); } if (chan != AH_NULL && IS_CHAN_5GHZ(chan)) { pll |= SM(0x50, AR_RTC_SOWL_PLL_DIV); } else { pll |= SM(0x58, AR_RTC_SOWL_PLL_DIV); } } else { pll = AR_RTC_PLL_REFDIV_5 | AR_RTC_PLL_DIV2; if (chan != AH_NULL && IS_CHAN_HALF_RATE(chan)) { pll |= SM(0x1, AR_RTC_PLL_CLKSEL); } else if (chan != AH_NULL && IS_CHAN_QUARTER_RATE(chan)) { pll |= SM(0x2, AR_RTC_PLL_CLKSEL); } if (chan != AH_NULL && IS_CHAN_5GHZ(chan)) { pll |= SM(0xa, AR_RTC_PLL_DIV); } else { pll |= SM(0xb, AR_RTC_PLL_DIV); } } OS_REG_WRITE(ah, AR_RTC_PLL_CONTROL, pll); /* TODO: * For multi-band owl, switch between bands by reiniting the PLL. */ OS_DELAY(RTC_PLL_SETTLE_DELAY); OS_REG_WRITE(ah, AR_RTC_SLEEP_CLK, AR_RTC_SLEEP_DERIVED_CLK); } /* * Read EEPROM header info and program the device for correct operation * given the channel value. */ static HAL_BOOL ar5416SetBoardValues(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *chan) { const HAL_EEPROM_v14 *ee = AH_PRIVATE(ah)->ah_eeprom; const struct ar5416eeprom *eep = &ee->ee_base; const MODAL_EEP_HEADER *pModal; int i, regChainOffset; uint8_t txRxAttenLocal; /* workaround for eeprom versions <= 14.2 */ HALASSERT(AH_PRIVATE(ah)->ah_eeversion >= AR_EEPROM_VER14_1); pModal = &(eep->modalHeader[IS_CHAN_2GHZ(chan)]); txRxAttenLocal = IS_CHAN_2GHZ(chan) ? 23 : 44; /* workaround for eeprom versions <= 14.2 */ OS_REG_WRITE(ah, AR_PHY_SWITCH_COM, pModal->antCtrlCommon); for (i = 0; i < AR5416_MAX_CHAINS; i++) { if (AR_SREV_MERLIN(ah)) { if (i >= 2) break; } if (AR_SREV_OWL_20_OR_LATER(ah) && (AH5416(ah)->ah_rx_chainmask == 0x5 || AH5416(ah)->ah_tx_chainmask == 0x5) && i != 0) { /* Regs are swapped from chain 2 to 1 for 5416 2_0 with * only chains 0 and 2 populated */ regChainOffset = (i == 1) ? 0x2000 : 0x1000; } else { regChainOffset = i * 0x1000; } OS_REG_WRITE(ah, AR_PHY_SWITCH_CHAIN_0 + regChainOffset, pModal->antCtrlChain[i]); OS_REG_WRITE(ah, AR_PHY_TIMING_CTRL4 + regChainOffset, (OS_REG_READ(ah, AR_PHY_TIMING_CTRL4 + regChainOffset) & ~(AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF | AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF)) | SM(pModal->iqCalICh[i], AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF) | SM(pModal->iqCalQCh[i], AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF)); /* * Large signal upgrade. * XXX update */ if ((i == 0) || AR_SREV_OWL_20_OR_LATER(ah)) { OS_REG_WRITE(ah, AR_PHY_RXGAIN + regChainOffset, (OS_REG_READ(ah, AR_PHY_RXGAIN + regChainOffset) & ~AR_PHY_RXGAIN_TXRX_ATTEN) | SM(IS_EEP_MINOR_V3(ah) ? pModal->txRxAttenCh[i] : txRxAttenLocal, AR_PHY_RXGAIN_TXRX_ATTEN)); OS_REG_WRITE(ah, AR_PHY_GAIN_2GHZ + regChainOffset, (OS_REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) & ~AR_PHY_GAIN_2GHZ_RXTX_MARGIN) | SM(pModal->rxTxMarginCh[i], AR_PHY_GAIN_2GHZ_RXTX_MARGIN)); } } OS_REG_RMW_FIELD(ah, AR_PHY_SETTLING, AR_PHY_SETTLING_SWITCH, pModal->switchSettling); OS_REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ, AR_PHY_DESIRED_SZ_ADC, pModal->adcDesiredSize); OS_REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ, AR_PHY_DESIRED_SZ_PGA, pModal->pgaDesiredSize); OS_REG_WRITE(ah, AR_PHY_RF_CTL4, SM(pModal->txEndToXpaOff, AR_PHY_RF_CTL4_TX_END_XPAA_OFF) | SM(pModal->txEndToXpaOff, AR_PHY_RF_CTL4_TX_END_XPAB_OFF) | SM(pModal->txFrameToXpaOn, AR_PHY_RF_CTL4_FRAME_XPAA_ON) | SM(pModal->txFrameToXpaOn, AR_PHY_RF_CTL4_FRAME_XPAB_ON)); OS_REG_RMW_FIELD(ah, AR_PHY_RF_CTL3, AR_PHY_TX_END_TO_A2_RX_ON, pModal->txEndToRxOn); if (AR_SREV_MERLIN_10_OR_LATER(ah)) { OS_REG_RMW_FIELD(ah, AR_PHY_CCA, AR9280_PHY_CCA_THRESH62, pModal->thresh62); OS_REG_RMW_FIELD(ah, AR_PHY_EXT_CCA0, AR_PHY_EXT_CCA0_THRESH62, pModal->thresh62); } else { OS_REG_RMW_FIELD(ah, AR_PHY_CCA, AR_PHY_CCA_THRESH62, pModal->thresh62); OS_REG_RMW_FIELD(ah, AR_PHY_EXT_CCA0, AR_PHY_EXT_CCA_THRESH62, pModal->thresh62); } /* Minor Version Specific application */ if (IS_EEP_MINOR_V2(ah)) { OS_REG_RMW_FIELD(ah, AR_PHY_RF_CTL2, AR_PHY_TX_FRAME_TO_DATA_START, pModal->txFrameToDataStart); OS_REG_RMW_FIELD(ah, AR_PHY_RF_CTL2, AR_PHY_TX_FRAME_TO_PA_ON, pModal->txFrameToPaOn); } if (IS_EEP_MINOR_V3(ah)) { if (IS_CHAN_HT40(chan)) { /* Overwrite switch settling with HT40 value */ OS_REG_RMW_FIELD(ah, AR_PHY_SETTLING, AR_PHY_SETTLING_SWITCH, pModal->swSettleHt40); } if ((AR_SREV_OWL_20_OR_LATER(ah)) && ( AH5416(ah)->ah_rx_chainmask == 0x5 || AH5416(ah)->ah_tx_chainmask == 0x5)){ /* Reg Offsets are swapped for logical mapping */ OS_REG_WRITE(ah, AR_PHY_GAIN_2GHZ + 0x1000, (OS_REG_READ(ah, AR_PHY_GAIN_2GHZ + 0x1000) & ~AR_PHY_GAIN_2GHZ_BSW_MARGIN) | SM(pModal->bswMargin[2], AR_PHY_GAIN_2GHZ_BSW_MARGIN)); OS_REG_WRITE(ah, AR_PHY_GAIN_2GHZ + 0x1000, (OS_REG_READ(ah, AR_PHY_GAIN_2GHZ + 0x1000) & ~AR_PHY_GAIN_2GHZ_BSW_ATTEN) | SM(pModal->bswAtten[2], AR_PHY_GAIN_2GHZ_BSW_ATTEN)); OS_REG_WRITE(ah, AR_PHY_GAIN_2GHZ + 0x2000, (OS_REG_READ(ah, AR_PHY_GAIN_2GHZ + 0x2000) & ~AR_PHY_GAIN_2GHZ_BSW_MARGIN) | SM(pModal->bswMargin[1], AR_PHY_GAIN_2GHZ_BSW_MARGIN)); OS_REG_WRITE(ah, AR_PHY_GAIN_2GHZ + 0x2000, (OS_REG_READ(ah, AR_PHY_GAIN_2GHZ + 0x2000) & ~AR_PHY_GAIN_2GHZ_BSW_ATTEN) | SM(pModal->bswAtten[1], AR_PHY_GAIN_2GHZ_BSW_ATTEN)); } else { OS_REG_WRITE(ah, AR_PHY_GAIN_2GHZ + 0x1000, (OS_REG_READ(ah, AR_PHY_GAIN_2GHZ + 0x1000) & ~AR_PHY_GAIN_2GHZ_BSW_MARGIN) | SM(pModal->bswMargin[1], AR_PHY_GAIN_2GHZ_BSW_MARGIN)); OS_REG_WRITE(ah, AR_PHY_GAIN_2GHZ + 0x1000, (OS_REG_READ(ah, AR_PHY_GAIN_2GHZ + 0x1000) & ~AR_PHY_GAIN_2GHZ_BSW_ATTEN) | SM(pModal->bswAtten[1], AR_PHY_GAIN_2GHZ_BSW_ATTEN)); OS_REG_WRITE(ah, AR_PHY_GAIN_2GHZ + 0x2000, (OS_REG_READ(ah, AR_PHY_GAIN_2GHZ + 0x2000) & ~AR_PHY_GAIN_2GHZ_BSW_MARGIN) | SM(pModal->bswMargin[2],AR_PHY_GAIN_2GHZ_BSW_MARGIN)); OS_REG_WRITE(ah, AR_PHY_GAIN_2GHZ + 0x2000, (OS_REG_READ(ah, AR_PHY_GAIN_2GHZ + 0x2000) & ~AR_PHY_GAIN_2GHZ_BSW_ATTEN) | SM(pModal->bswAtten[2], AR_PHY_GAIN_2GHZ_BSW_ATTEN)); } OS_REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ, AR_PHY_GAIN_2GHZ_BSW_MARGIN, pModal->bswMargin[0]); OS_REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ, AR_PHY_GAIN_2GHZ_BSW_ATTEN, pModal->bswAtten[0]); } return AH_TRUE; } /* * Helper functions common for AP/CB/XB */ /* * ar5416SetPowerPerRateTable * * Sets the transmit power in the baseband for the given * operating channel and mode. */ static HAL_BOOL ar5416SetPowerPerRateTable(struct ath_hal *ah, struct ar5416eeprom *pEepData, HAL_CHANNEL_INTERNAL *chan, int16_t *ratesArray, uint16_t cfgCtl, uint16_t AntennaReduction, uint16_t twiceMaxRegulatoryPower, uint16_t powerLimit) { #define N(a) (sizeof(a)/sizeof(a[0])) /* Local defines to distinguish between extension and control CTL's */ #define EXT_ADDITIVE (0x8000) #define CTL_11A_EXT (CTL_11A | EXT_ADDITIVE) #define CTL_11G_EXT (CTL_11G | EXT_ADDITIVE) #define CTL_11B_EXT (CTL_11B | EXT_ADDITIVE) uint16_t twiceMaxEdgePower = AR5416_MAX_RATE_POWER; int i; int16_t twiceLargestAntenna; CAL_CTL_DATA *rep; CAL_TARGET_POWER_LEG targetPowerOfdm, targetPowerCck = {0, {0, 0, 0, 0}}; CAL_TARGET_POWER_LEG targetPowerOfdmExt = {0, {0, 0, 0, 0}}, targetPowerCckExt = {0, {0, 0, 0, 0}}; CAL_TARGET_POWER_HT targetPowerHt20, targetPowerHt40 = {0, {0, 0, 0, 0}}; int16_t scaledPower, minCtlPower; #define SUB_NUM_CTL_MODES_AT_5G_40 2 /* excluding HT40, EXT-OFDM */ #define SUB_NUM_CTL_MODES_AT_2G_40 3 /* excluding HT40, EXT-OFDM, EXT-CCK */ static const uint16_t ctlModesFor11a[] = { CTL_11A, CTL_5GHT20, CTL_11A_EXT, CTL_5GHT40 }; static const uint16_t ctlModesFor11g[] = { CTL_11B, CTL_11G, CTL_2GHT20, CTL_11B_EXT, CTL_11G_EXT, CTL_2GHT40 }; const uint16_t *pCtlMode; uint16_t numCtlModes, ctlMode, freq; CHAN_CENTERS centers; ar5416GetChannelCenters(ah, chan, ¢ers); /* Compute TxPower reduction due to Antenna Gain */ twiceLargestAntenna = AH_MAX(AH_MAX(pEepData->modalHeader[IS_CHAN_2GHZ(chan)].antennaGainCh[0], pEepData->modalHeader[IS_CHAN_2GHZ(chan)].antennaGainCh[1]), pEepData->modalHeader[IS_CHAN_2GHZ(chan)].antennaGainCh[2]); #if 0 /* Turn it back on if we need to calculate per chain antenna gain reduction */ /* Use only if the expected gain > 6dbi */ /* Chain 0 is always used */ twiceLargestAntenna = pEepData->modalHeader[IS_CHAN_2GHZ(chan)].antennaGainCh[0]; /* Look at antenna gains of Chains 1 and 2 if the TX mask is set */ if (ahp->ah_tx_chainmask & 0x2) twiceLargestAntenna = AH_MAX(twiceLargestAntenna, pEepData->modalHeader[IS_CHAN_2GHZ(chan)].antennaGainCh[1]); if (ahp->ah_tx_chainmask & 0x4) twiceLargestAntenna = AH_MAX(twiceLargestAntenna, pEepData->modalHeader[IS_CHAN_2GHZ(chan)].antennaGainCh[2]); #endif twiceLargestAntenna = (int16_t)AH_MIN((AntennaReduction) - twiceLargestAntenna, 0); /* XXX setup for 5212 use (really used?) */ ath_hal_eepromSet(ah, IS_CHAN_2GHZ(chan) ? AR_EEP_ANTGAINMAX_2 : AR_EEP_ANTGAINMAX_5, twiceLargestAntenna); /* * scaledPower is the minimum of the user input power level and * the regulatory allowed power level */ scaledPower = AH_MIN(powerLimit, twiceMaxRegulatoryPower + twiceLargestAntenna); /* Reduce scaled Power by number of chains active to get to per chain tx power level */ /* TODO: better value than these? */ switch (owl_get_ntxchains(AH5416(ah)->ah_tx_chainmask)) { case 1: break; case 2: scaledPower -= pEepData->modalHeader[IS_CHAN_2GHZ(chan)].pwrDecreaseFor2Chain; break; case 3: scaledPower -= pEepData->modalHeader[IS_CHAN_2GHZ(chan)].pwrDecreaseFor3Chain; break; default: return AH_FALSE; /* Unsupported number of chains */ } scaledPower = AH_MAX(0, scaledPower); /* Get target powers from EEPROM - our baseline for TX Power */ if (IS_CHAN_2GHZ(chan)) { /* Setup for CTL modes */ numCtlModes = N(ctlModesFor11g) - SUB_NUM_CTL_MODES_AT_2G_40; /* CTL_11B, CTL_11G, CTL_2GHT20 */ pCtlMode = ctlModesFor11g; ar5416GetTargetPowersLeg(ah, chan, pEepData->calTargetPowerCck, AR5416_NUM_2G_CCK_TARGET_POWERS, &targetPowerCck, 4, AH_FALSE); ar5416GetTargetPowersLeg(ah, chan, pEepData->calTargetPower2G, AR5416_NUM_2G_20_TARGET_POWERS, &targetPowerOfdm, 4, AH_FALSE); ar5416GetTargetPowers(ah, chan, pEepData->calTargetPower2GHT20, AR5416_NUM_2G_20_TARGET_POWERS, &targetPowerHt20, 8, AH_FALSE); if (IS_CHAN_HT40(chan)) { numCtlModes = N(ctlModesFor11g); /* All 2G CTL's */ ar5416GetTargetPowers(ah, chan, pEepData->calTargetPower2GHT40, AR5416_NUM_2G_40_TARGET_POWERS, &targetPowerHt40, 8, AH_TRUE); /* Get target powers for extension channels */ ar5416GetTargetPowersLeg(ah, chan, pEepData->calTargetPowerCck, AR5416_NUM_2G_CCK_TARGET_POWERS, &targetPowerCckExt, 4, AH_TRUE); ar5416GetTargetPowersLeg(ah, chan, pEepData->calTargetPower2G, AR5416_NUM_2G_20_TARGET_POWERS, &targetPowerOfdmExt, 4, AH_TRUE); } } else { /* Setup for CTL modes */ numCtlModes = N(ctlModesFor11a) - SUB_NUM_CTL_MODES_AT_5G_40; /* CTL_11A, CTL_5GHT20 */ pCtlMode = ctlModesFor11a; ar5416GetTargetPowersLeg(ah, chan, pEepData->calTargetPower5G, AR5416_NUM_5G_20_TARGET_POWERS, &targetPowerOfdm, 4, AH_FALSE); ar5416GetTargetPowers(ah, chan, pEepData->calTargetPower5GHT20, AR5416_NUM_5G_20_TARGET_POWERS, &targetPowerHt20, 8, AH_FALSE); if (IS_CHAN_HT40(chan)) { numCtlModes = N(ctlModesFor11a); /* All 5G CTL's */ ar5416GetTargetPowers(ah, chan, pEepData->calTargetPower5GHT40, AR5416_NUM_5G_40_TARGET_POWERS, &targetPowerHt40, 8, AH_TRUE); ar5416GetTargetPowersLeg(ah, chan, pEepData->calTargetPower5G, AR5416_NUM_5G_20_TARGET_POWERS, &targetPowerOfdmExt, 4, AH_TRUE); } } /* * For MIMO, need to apply regulatory caps individually across dynamically * running modes: CCK, OFDM, HT20, HT40 * * The outer loop walks through each possible applicable runtime mode. * The inner loop walks through each ctlIndex entry in EEPROM. * The ctl value is encoded as [7:4] == test group, [3:0] == test mode. * */ for (ctlMode = 0; ctlMode < numCtlModes; ctlMode++) { HAL_BOOL isHt40CtlMode = (pCtlMode[ctlMode] == CTL_5GHT40) || (pCtlMode[ctlMode] == CTL_2GHT40); if (isHt40CtlMode) { freq = centers.ctl_center; } else if (pCtlMode[ctlMode] & EXT_ADDITIVE) { freq = centers.ext_center; } else { freq = centers.ctl_center; } /* walk through each CTL index stored in EEPROM */ for (i = 0; (i < AR5416_NUM_CTLS) && pEepData->ctlIndex[i]; i++) { uint16_t twiceMinEdgePower; /* compare test group from regulatory channel list with test mode from pCtlMode list */ if ((((cfgCtl & ~CTL_MODE_M) | (pCtlMode[ctlMode] & CTL_MODE_M)) == pEepData->ctlIndex[i]) || (((cfgCtl & ~CTL_MODE_M) | (pCtlMode[ctlMode] & CTL_MODE_M)) == ((pEepData->ctlIndex[i] & CTL_MODE_M) | SD_NO_CTL))) { rep = &(pEepData->ctlData[i]); twiceMinEdgePower = ar5416GetMaxEdgePower(freq, rep->ctlEdges[owl_get_ntxchains(AH5416(ah)->ah_tx_chainmask) - 1], IS_CHAN_2GHZ(chan)); if ((cfgCtl & ~CTL_MODE_M) == SD_NO_CTL) { /* Find the minimum of all CTL edge powers that apply to this channel */ twiceMaxEdgePower = AH_MIN(twiceMaxEdgePower, twiceMinEdgePower); } else { /* specific */ twiceMaxEdgePower = twiceMinEdgePower; break; } } } minCtlPower = (uint8_t)AH_MIN(twiceMaxEdgePower, scaledPower); /* Apply ctl mode to correct target power set */ switch(pCtlMode[ctlMode]) { case CTL_11B: for (i = 0; i < N(targetPowerCck.tPow2x); i++) { targetPowerCck.tPow2x[i] = (uint8_t)AH_MIN(targetPowerCck.tPow2x[i], minCtlPower); } break; case CTL_11A: case CTL_11G: for (i = 0; i < N(targetPowerOfdm.tPow2x); i++) { targetPowerOfdm.tPow2x[i] = (uint8_t)AH_MIN(targetPowerOfdm.tPow2x[i], minCtlPower); } break; case CTL_5GHT20: case CTL_2GHT20: for (i = 0; i < N(targetPowerHt20.tPow2x); i++) { targetPowerHt20.tPow2x[i] = (uint8_t)AH_MIN(targetPowerHt20.tPow2x[i], minCtlPower); } break; case CTL_11B_EXT: targetPowerCckExt.tPow2x[0] = (uint8_t)AH_MIN(targetPowerCckExt.tPow2x[0], minCtlPower); break; case CTL_11A_EXT: case CTL_11G_EXT: targetPowerOfdmExt.tPow2x[0] = (uint8_t)AH_MIN(targetPowerOfdmExt.tPow2x[0], minCtlPower); break; case CTL_5GHT40: case CTL_2GHT40: for (i = 0; i < N(targetPowerHt40.tPow2x); i++) { targetPowerHt40.tPow2x[i] = (uint8_t)AH_MIN(targetPowerHt40.tPow2x[i], minCtlPower); } break; default: return AH_FALSE; break; } } /* end ctl mode checking */ /* Set rates Array from collected data */ ratesArray[rate6mb] = ratesArray[rate9mb] = ratesArray[rate12mb] = ratesArray[rate18mb] = ratesArray[rate24mb] = targetPowerOfdm.tPow2x[0]; ratesArray[rate36mb] = targetPowerOfdm.tPow2x[1]; ratesArray[rate48mb] = targetPowerOfdm.tPow2x[2]; ratesArray[rate54mb] = targetPowerOfdm.tPow2x[3]; ratesArray[rateXr] = targetPowerOfdm.tPow2x[0]; for (i = 0; i < N(targetPowerHt20.tPow2x); i++) { ratesArray[rateHt20_0 + i] = targetPowerHt20.tPow2x[i]; } if (IS_CHAN_2GHZ(chan)) { ratesArray[rate1l] = targetPowerCck.tPow2x[0]; ratesArray[rate2s] = ratesArray[rate2l] = targetPowerCck.tPow2x[1]; ratesArray[rate5_5s] = ratesArray[rate5_5l] = targetPowerCck.tPow2x[2]; ratesArray[rate11s] = ratesArray[rate11l] = targetPowerCck.tPow2x[3]; } if (IS_CHAN_HT40(chan)) { for (i = 0; i < N(targetPowerHt40.tPow2x); i++) { ratesArray[rateHt40_0 + i] = targetPowerHt40.tPow2x[i]; } ratesArray[rateDupOfdm] = targetPowerHt40.tPow2x[0]; ratesArray[rateDupCck] = targetPowerHt40.tPow2x[0]; ratesArray[rateExtOfdm] = targetPowerOfdmExt.tPow2x[0]; if (IS_CHAN_2GHZ(chan)) { ratesArray[rateExtCck] = targetPowerCckExt.tPow2x[0]; } } return AH_TRUE; #undef EXT_ADDITIVE #undef CTL_11A_EXT #undef CTL_11G_EXT #undef CTL_11B_EXT #undef SUB_NUM_CTL_MODES_AT_5G_40 #undef SUB_NUM_CTL_MODES_AT_2G_40 #undef N } /************************************************************************** * fbin2freq * * Get channel value from binary representation held in eeprom * RETURNS: the frequency in MHz */ static uint16_t fbin2freq(uint8_t fbin, HAL_BOOL is2GHz) { /* * Reserved value 0xFF provides an empty definition both as * an fbin and as a frequency - do not convert */ if (fbin == AR5416_BCHAN_UNUSED) { return fbin; } return (uint16_t)((is2GHz) ? (2300 + fbin) : (4800 + 5 * fbin)); } /* * ar5416GetMaxEdgePower * * Find the maximum conformance test limit for the given channel and CTL info */ static uint16_t ar5416GetMaxEdgePower(uint16_t freq, CAL_CTL_EDGES *pRdEdgesPower, HAL_BOOL is2GHz) { uint16_t twiceMaxEdgePower = AR5416_MAX_RATE_POWER; int i; /* Get the edge power */ for (i = 0; (i < AR5416_NUM_BAND_EDGES) && (pRdEdgesPower[i].bChannel != AR5416_BCHAN_UNUSED) ; i++) { /* * If there's an exact channel match or an inband flag set * on the lower channel use the given rdEdgePower */ if (freq == fbin2freq(pRdEdgesPower[i].bChannel, is2GHz)) { twiceMaxEdgePower = MS(pRdEdgesPower[i].tPowerFlag, CAL_CTL_EDGES_POWER); break; } else if ((i > 0) && (freq < fbin2freq(pRdEdgesPower[i].bChannel, is2GHz))) { if (fbin2freq(pRdEdgesPower[i - 1].bChannel, is2GHz) < freq && (pRdEdgesPower[i - 1].tPowerFlag & CAL_CTL_EDGES_FLAG) != 0) { twiceMaxEdgePower = MS(pRdEdgesPower[i - 1].tPowerFlag, CAL_CTL_EDGES_POWER); } /* Leave loop - no more affecting edges possible in this monotonic increasing list */ break; } } HALASSERT(twiceMaxEdgePower > 0); return twiceMaxEdgePower; } /************************************************************** * ar5416GetTargetPowers * * Return the rates of target power for the given target power table * channel, and number of channels */ static void ar5416GetTargetPowers(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *chan, CAL_TARGET_POWER_HT *powInfo, uint16_t numChannels, CAL_TARGET_POWER_HT *pNewPower, uint16_t numRates, HAL_BOOL isHt40Target) { uint16_t clo, chi; int i; int matchIndex = -1, lowIndex = -1; uint16_t freq; CHAN_CENTERS centers; ar5416GetChannelCenters(ah, chan, ¢ers); freq = isHt40Target ? centers.synth_center : centers.ctl_center; /* Copy the target powers into the temp channel list */ if (freq <= fbin2freq(powInfo[0].bChannel, IS_CHAN_2GHZ(chan))) { matchIndex = 0; } else { for (i = 0; (i < numChannels) && (powInfo[i].bChannel != AR5416_BCHAN_UNUSED); i++) { if (freq == fbin2freq(powInfo[i].bChannel, IS_CHAN_2GHZ(chan))) { matchIndex = i; break; } else if ((freq < fbin2freq(powInfo[i].bChannel, IS_CHAN_2GHZ(chan))) && (freq > fbin2freq(powInfo[i - 1].bChannel, IS_CHAN_2GHZ(chan)))) { lowIndex = i - 1; break; } } if ((matchIndex == -1) && (lowIndex == -1)) { HALASSERT(freq > fbin2freq(powInfo[i - 1].bChannel, IS_CHAN_2GHZ(chan))); matchIndex = i - 1; } } if (matchIndex != -1) { OS_MEMCPY(pNewPower, &powInfo[matchIndex], sizeof(*pNewPower)); } else { HALASSERT(lowIndex != -1); /* * Get the lower and upper channels, target powers, * and interpolate between them. */ clo = fbin2freq(powInfo[lowIndex].bChannel, IS_CHAN_2GHZ(chan)); chi = fbin2freq(powInfo[lowIndex + 1].bChannel, IS_CHAN_2GHZ(chan)); for (i = 0; i < numRates; i++) { pNewPower->tPow2x[i] = (uint8_t)interpolate(freq, clo, chi, powInfo[lowIndex].tPow2x[i], powInfo[lowIndex + 1].tPow2x[i]); } } } /************************************************************** * ar5416GetTargetPowersLeg * * Return the four rates of target power for the given target power table * channel, and number of channels */ static void ar5416GetTargetPowersLeg(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *chan, CAL_TARGET_POWER_LEG *powInfo, uint16_t numChannels, CAL_TARGET_POWER_LEG *pNewPower, uint16_t numRates, HAL_BOOL isExtTarget) { uint16_t clo, chi; int i; int matchIndex = -1, lowIndex = -1; uint16_t freq; CHAN_CENTERS centers; ar5416GetChannelCenters(ah, chan, ¢ers); freq = (isExtTarget) ? centers.ext_center :centers.ctl_center; /* Copy the target powers into the temp channel list */ if (freq <= fbin2freq(powInfo[0].bChannel, IS_CHAN_2GHZ(chan))) { matchIndex = 0; } else { for (i = 0; (i < numChannels) && (powInfo[i].bChannel != AR5416_BCHAN_UNUSED); i++) { if (freq == fbin2freq(powInfo[i].bChannel, IS_CHAN_2GHZ(chan))) { matchIndex = i; break; } else if ((freq < fbin2freq(powInfo[i].bChannel, IS_CHAN_2GHZ(chan))) && (freq > fbin2freq(powInfo[i - 1].bChannel, IS_CHAN_2GHZ(chan)))) { lowIndex = i - 1; break; } } if ((matchIndex == -1) && (lowIndex == -1)) { HALASSERT(freq > fbin2freq(powInfo[i - 1].bChannel, IS_CHAN_2GHZ(chan))); matchIndex = i - 1; } } if (matchIndex != -1) { OS_MEMCPY(pNewPower, &powInfo[matchIndex], sizeof(*pNewPower)); } else { HALASSERT(lowIndex != -1); /* * Get the lower and upper channels, target powers, * and interpolate between them. */ clo = fbin2freq(powInfo[lowIndex].bChannel, IS_CHAN_2GHZ(chan)); chi = fbin2freq(powInfo[lowIndex + 1].bChannel, IS_CHAN_2GHZ(chan)); for (i = 0; i < numRates; i++) { pNewPower->tPow2x[i] = (uint8_t)interpolate(freq, clo, chi, powInfo[lowIndex].tPow2x[i], powInfo[lowIndex + 1].tPow2x[i]); } } } /************************************************************** * ar5416SetPowerCalTable * * Pull the PDADC piers from cal data and interpolate them across the given * points as well as from the nearest pier(s) to get a power detector * linear voltage to power level table. */ static HAL_BOOL ar5416SetPowerCalTable(struct ath_hal *ah, struct ar5416eeprom *pEepData, HAL_CHANNEL_INTERNAL *chan, int16_t *pTxPowerIndexOffset) { CAL_DATA_PER_FREQ *pRawDataset; uint8_t *pCalBChans = AH_NULL; uint16_t pdGainOverlap_t2; static uint8_t pdadcValues[AR5416_NUM_PDADC_VALUES]; uint16_t gainBoundaries[AR5416_PD_GAINS_IN_MASK]; uint16_t numPiers, i, j; int16_t tMinCalPower; uint16_t numXpdGain, xpdMask; uint16_t xpdGainValues[AR5416_NUM_PD_GAINS]; uint32_t reg32, regOffset, regChainOffset; ath_hal_memzero(xpdGainValues, sizeof(xpdGainValues)); xpdMask = pEepData->modalHeader[IS_CHAN_2GHZ(chan)].xpdGain; if (IS_EEP_MINOR_V2(ah)) { pdGainOverlap_t2 = pEepData->modalHeader[IS_CHAN_2GHZ(chan)].pdGainOverlap; } else { pdGainOverlap_t2 = (uint16_t)(MS(OS_REG_READ(ah, AR_PHY_TPCRG5), AR_PHY_TPCRG5_PD_GAIN_OVERLAP)); } if (IS_CHAN_2GHZ(chan)) { pCalBChans = pEepData->calFreqPier2G; numPiers = AR5416_NUM_2G_CAL_PIERS; } else { pCalBChans = pEepData->calFreqPier5G; numPiers = AR5416_NUM_5G_CAL_PIERS; } numXpdGain = 0; /* Calculate the value of xpdgains from the xpdGain Mask */ for (i = 1; i <= AR5416_PD_GAINS_IN_MASK; i++) { if ((xpdMask >> (AR5416_PD_GAINS_IN_MASK - i)) & 1) { if (numXpdGain >= AR5416_NUM_PD_GAINS) { HALASSERT(0); break; } xpdGainValues[numXpdGain] = (uint16_t)(AR5416_PD_GAINS_IN_MASK - i); numXpdGain++; } } /* Write the detector gain biases and their number */ OS_REG_WRITE(ah, AR_PHY_TPCRG1, (OS_REG_READ(ah, AR_PHY_TPCRG1) & ~(AR_PHY_TPCRG1_NUM_PD_GAIN | AR_PHY_TPCRG1_PD_GAIN_1 | AR_PHY_TPCRG1_PD_GAIN_2 | AR_PHY_TPCRG1_PD_GAIN_3)) | SM(numXpdGain - 1, AR_PHY_TPCRG1_NUM_PD_GAIN) | SM(xpdGainValues[0], AR_PHY_TPCRG1_PD_GAIN_1 ) | SM(xpdGainValues[1], AR_PHY_TPCRG1_PD_GAIN_2) | SM(xpdGainValues[2], AR_PHY_TPCRG1_PD_GAIN_3)); for (i = 0; i < AR5416_MAX_CHAINS; i++) { if (AR_SREV_OWL_20_OR_LATER(ah) && ( AH5416(ah)->ah_rx_chainmask == 0x5 || AH5416(ah)->ah_tx_chainmask == 0x5) && (i != 0)) { /* Regs are swapped from chain 2 to 1 for 5416 2_0 with * only chains 0 and 2 populated */ regChainOffset = (i == 1) ? 0x2000 : 0x1000; } else { regChainOffset = i * 0x1000; } if (pEepData->baseEepHeader.txMask & (1 << i)) { if (IS_CHAN_2GHZ(chan)) { pRawDataset = pEepData->calPierData2G[i]; } else { pRawDataset = pEepData->calPierData5G[i]; } ar5416GetGainBoundariesAndPdadcs(ah, chan, pRawDataset, pCalBChans, numPiers, pdGainOverlap_t2, &tMinCalPower, gainBoundaries, pdadcValues, numXpdGain); if ((i == 0) || AR_SREV_OWL_20_OR_LATER(ah)) { /* * Note the pdadc table may not start at 0 dBm power, could be * negative or greater than 0. Need to offset the power * values by the amount of minPower for griffin */ OS_REG_WRITE(ah, AR_PHY_TPCRG5 + regChainOffset, SM(pdGainOverlap_t2, AR_PHY_TPCRG5_PD_GAIN_OVERLAP) | SM(gainBoundaries[0], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_1) | SM(gainBoundaries[1], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_2) | SM(gainBoundaries[2], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_3) | SM(gainBoundaries[3], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_4)); } /* Write the power values into the baseband power table */ regOffset = AR_PHY_BASE + (672 << 2) + regChainOffset; for (j = 0; j < 32; j++) { reg32 = ((pdadcValues[4*j + 0] & 0xFF) << 0) | ((pdadcValues[4*j + 1] & 0xFF) << 8) | ((pdadcValues[4*j + 2] & 0xFF) << 16) | ((pdadcValues[4*j + 3] & 0xFF) << 24) ; OS_REG_WRITE(ah, regOffset, reg32); #ifdef PDADC_DUMP ath_hal_printf(ah, "PDADC: Chain %d | PDADC %3d Value %3d | PDADC %3d Value %3d | PDADC %3d Value %3d | PDADC %3d Value %3d |\n", i, 4*j, pdadcValues[4*j], 4*j+1, pdadcValues[4*j + 1], 4*j+2, pdadcValues[4*j + 2], 4*j+3, pdadcValues[4*j + 3]); #endif regOffset += 4; } } } *pTxPowerIndexOffset = 0; return AH_TRUE; } /************************************************************** * ar5416GetGainBoundariesAndPdadcs * * Uses the data points read from EEPROM to reconstruct the pdadc power table * Called by ar5416SetPowerCalTable only. */ static void ar5416GetGainBoundariesAndPdadcs(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *chan, CAL_DATA_PER_FREQ *pRawDataSet, uint8_t * bChans, uint16_t availPiers, uint16_t tPdGainOverlap, int16_t *pMinCalPower, uint16_t * pPdGainBoundaries, uint8_t * pPDADCValues, uint16_t numXpdGains) { int i, j, k; int16_t ss; /* potentially -ve index for taking care of pdGainOverlap */ uint16_t idxL = 0, idxR = 0, numPiers; /* Pier indexes */ /* filled out Vpd table for all pdGains (chanL) */ static uint8_t vpdTableL[AR5416_NUM_PD_GAINS][AR5416_MAX_PWR_RANGE_IN_HALF_DB]; /* filled out Vpd table for all pdGains (chanR) */ static uint8_t vpdTableR[AR5416_NUM_PD_GAINS][AR5416_MAX_PWR_RANGE_IN_HALF_DB]; /* filled out Vpd table for all pdGains (interpolated) */ static uint8_t vpdTableI[AR5416_NUM_PD_GAINS][AR5416_MAX_PWR_RANGE_IN_HALF_DB]; uint8_t *pVpdL, *pVpdR, *pPwrL, *pPwrR; uint8_t minPwrT4[AR5416_NUM_PD_GAINS]; uint8_t maxPwrT4[AR5416_NUM_PD_GAINS]; int16_t vpdStep; int16_t tmpVal; uint16_t sizeCurrVpdTable, maxIndex, tgtIndex; HAL_BOOL match; int16_t minDelta = 0; CHAN_CENTERS centers; ar5416GetChannelCenters(ah, chan, ¢ers); /* Trim numPiers for the number of populated channel Piers */ for (numPiers = 0; numPiers < availPiers; numPiers++) { if (bChans[numPiers] == AR5416_BCHAN_UNUSED) { break; } } /* Find pier indexes around the current channel */ match = getLowerUpperIndex((uint8_t)FREQ2FBIN(centers.synth_center, IS_CHAN_2GHZ(chan)), bChans, numPiers, &idxL, &idxR); if (match) { /* Directly fill both vpd tables from the matching index */ for (i = 0; i < numXpdGains; i++) { minPwrT4[i] = pRawDataSet[idxL].pwrPdg[i][0]; maxPwrT4[i] = pRawDataSet[idxL].pwrPdg[i][4]; ar5416FillVpdTable(minPwrT4[i], maxPwrT4[i], pRawDataSet[idxL].pwrPdg[i], pRawDataSet[idxL].vpdPdg[i], AR5416_PD_GAIN_ICEPTS, vpdTableI[i]); } } else { for (i = 0; i < numXpdGains; i++) { pVpdL = pRawDataSet[idxL].vpdPdg[i]; pPwrL = pRawDataSet[idxL].pwrPdg[i]; pVpdR = pRawDataSet[idxR].vpdPdg[i]; pPwrR = pRawDataSet[idxR].pwrPdg[i]; /* Start Vpd interpolation from the max of the minimum powers */ minPwrT4[i] = AH_MAX(pPwrL[0], pPwrR[0]); /* End Vpd interpolation from the min of the max powers */ maxPwrT4[i] = AH_MIN(pPwrL[AR5416_PD_GAIN_ICEPTS - 1], pPwrR[AR5416_PD_GAIN_ICEPTS - 1]); HALASSERT(maxPwrT4[i] > minPwrT4[i]); /* Fill pier Vpds */ ar5416FillVpdTable(minPwrT4[i], maxPwrT4[i], pPwrL, pVpdL, AR5416_PD_GAIN_ICEPTS, vpdTableL[i]); ar5416FillVpdTable(minPwrT4[i], maxPwrT4[i], pPwrR, pVpdR, AR5416_PD_GAIN_ICEPTS, vpdTableR[i]); /* Interpolate the final vpd */ for (j = 0; j <= (maxPwrT4[i] - minPwrT4[i]) / 2; j++) { vpdTableI[i][j] = (uint8_t)(interpolate((uint16_t)FREQ2FBIN(centers.synth_center, IS_CHAN_2GHZ(chan)), bChans[idxL], bChans[idxR], vpdTableL[i][j], vpdTableR[i][j])); } } } *pMinCalPower = (int16_t)(minPwrT4[0] / 2); k = 0; /* index for the final table */ for (i = 0; i < numXpdGains; i++) { if (i == (numXpdGains - 1)) { pPdGainBoundaries[i] = (uint16_t)(maxPwrT4[i] / 2); } else { pPdGainBoundaries[i] = (uint16_t)((maxPwrT4[i] + minPwrT4[i+1]) / 4); } pPdGainBoundaries[i] = (uint16_t)AH_MIN(AR5416_MAX_RATE_POWER, pPdGainBoundaries[i]); /* NB: only applies to owl 1.0 */ if ((i == 0) && !AR_SREV_OWL_20_OR_LATER(ah) ) { /* * fix the gain delta, but get a delta that can be applied to min to * keep the upper power values accurate, don't think max needs to * be adjusted because should not be at that area of the table? */ minDelta = pPdGainBoundaries[0] - 23; pPdGainBoundaries[0] = 23; } else { minDelta = 0; } /* Find starting index for this pdGain */ if (i == 0) { ss = 0; /* for the first pdGain, start from index 0 */ } else { /* need overlap entries extrapolated below. */ ss = (int16_t)((pPdGainBoundaries[i-1] - (minPwrT4[i] / 2)) - tPdGainOverlap + 1 + minDelta); } vpdStep = (int16_t)(vpdTableI[i][1] - vpdTableI[i][0]); vpdStep = (int16_t)((vpdStep < 1) ? 1 : vpdStep); /* *-ve ss indicates need to extrapolate data below for this pdGain */ while ((ss < 0) && (k < (AR5416_NUM_PDADC_VALUES - 1))) { tmpVal = (int16_t)(vpdTableI[i][0] + ss * vpdStep); pPDADCValues[k++] = (uint8_t)((tmpVal < 0) ? 0 : tmpVal); ss++; } sizeCurrVpdTable = (uint8_t)((maxPwrT4[i] - minPwrT4[i]) / 2 +1); tgtIndex = (uint8_t)(pPdGainBoundaries[i] + tPdGainOverlap - (minPwrT4[i] / 2)); maxIndex = (tgtIndex < sizeCurrVpdTable) ? tgtIndex : sizeCurrVpdTable; while ((ss < maxIndex) && (k < (AR5416_NUM_PDADC_VALUES - 1))) { pPDADCValues[k++] = vpdTableI[i][ss++]; } vpdStep = (int16_t)(vpdTableI[i][sizeCurrVpdTable - 1] - vpdTableI[i][sizeCurrVpdTable - 2]); vpdStep = (int16_t)((vpdStep < 1) ? 1 : vpdStep); /* * for last gain, pdGainBoundary == Pmax_t2, so will * have to extrapolate */ if (tgtIndex > maxIndex) { /* need to extrapolate above */ while ((ss <= tgtIndex) && (k < (AR5416_NUM_PDADC_VALUES - 1))) { tmpVal = (int16_t)((vpdTableI[i][sizeCurrVpdTable - 1] + (ss - maxIndex +1) * vpdStep)); pPDADCValues[k++] = (uint8_t)((tmpVal > 255) ? 255 : tmpVal); ss++; } } /* extrapolated above */ } /* for all pdGainUsed */ /* Fill out pdGainBoundaries - only up to 2 allowed here, but hardware allows up to 4 */ while (i < AR5416_PD_GAINS_IN_MASK) { pPdGainBoundaries[i] = pPdGainBoundaries[i-1]; i++; } while (k < AR5416_NUM_PDADC_VALUES) { pPDADCValues[k] = pPDADCValues[k-1]; k++; } return; } /************************************************************** * getLowerUppderIndex * * Return indices surrounding the value in sorted integer lists. * Requirement: the input list must be monotonically increasing * and populated up to the list size * Returns: match is set if an index in the array matches exactly * or a the target is before or after the range of the array. */ HAL_BOOL getLowerUpperIndex(uint8_t target, uint8_t *pList, uint16_t listSize, uint16_t *indexL, uint16_t *indexR) { uint16_t i; /* * Check first and last elements for beyond ordered array cases. */ if (target <= pList[0]) { *indexL = *indexR = 0; return AH_TRUE; } if (target >= pList[listSize-1]) { *indexL = *indexR = (uint16_t)(listSize - 1); return AH_TRUE; } /* look for value being near or between 2 values in list */ for (i = 0; i < listSize - 1; i++) { /* * If value is close to the current value of the list * then target is not between values, it is one of the values */ if (pList[i] == target) { *indexL = *indexR = i; return AH_TRUE; } /* * Look for value being between current value and next value * if so return these 2 values */ if (target < pList[i + 1]) { *indexL = i; *indexR = (uint16_t)(i + 1); return AH_FALSE; } } HALASSERT(0); return AH_FALSE; } /************************************************************** * ar5416FillVpdTable * * Fill the Vpdlist for indices Pmax-Pmin * Note: pwrMin, pwrMax and Vpdlist are all in dBm * 4 */ static HAL_BOOL ar5416FillVpdTable(uint8_t pwrMin, uint8_t pwrMax, uint8_t *pPwrList, uint8_t *pVpdList, uint16_t numIntercepts, uint8_t *pRetVpdList) { uint16_t i, k; uint8_t currPwr = pwrMin; uint16_t idxL = 0, idxR = 0; HALASSERT(pwrMax > pwrMin); for (i = 0; i <= (pwrMax - pwrMin) / 2; i++) { getLowerUpperIndex(currPwr, pPwrList, numIntercepts, &(idxL), &(idxR)); if (idxR < 1) idxR = 1; /* extrapolate below */ if (idxL == numIntercepts - 1) idxL = (uint16_t)(numIntercepts - 2); /* extrapolate above */ if (pPwrList[idxL] == pPwrList[idxR]) k = pVpdList[idxL]; else k = (uint16_t)( ((currPwr - pPwrList[idxL]) * pVpdList[idxR] + (pPwrList[idxR] - currPwr) * pVpdList[idxL]) / (pPwrList[idxR] - pPwrList[idxL]) ); HALASSERT(k < 256); pRetVpdList[i] = (uint8_t)k; currPwr += 2; /* half dB steps */ } return AH_TRUE; } /************************************************************************** * interpolate * * Returns signed interpolated or the scaled up interpolated value */ static int16_t interpolate(uint16_t target, uint16_t srcLeft, uint16_t srcRight, int16_t targetLeft, int16_t targetRight) { int16_t rv; if (srcRight == srcLeft) { rv = targetLeft; } else { rv = (int16_t)( ((target - srcLeft) * targetRight + (srcRight - target) * targetLeft) / (srcRight - srcLeft) ); } return rv; } static void ar5416Set11nRegs(struct ath_hal *ah, HAL_CHANNEL *chan) { uint32_t phymode; HAL_HT_MACMODE macmode; /* MAC - 20/40 mode */ if (!IS_CHAN_HT(chan)) return; /* Enable 11n HT, 20 MHz */ phymode = AR_PHY_FC_HT_EN | AR_PHY_FC_SHORT_GI_40 | AR_PHY_FC_SINGLE_HT_LTF1 | AR_PHY_FC_WALSH; /* Configure baseband for dynamic 20/40 operation */ if (IS_CHAN_HT40(chan)) { phymode |= AR_PHY_FC_DYN2040_EN | AR_PHY_FC_SHORT_GI_40; /* Configure control (primary) channel at +-10MHz */ if ((chan->channelFlags & CHANNEL_HT40PLUS)) phymode |= AR_PHY_FC_DYN2040_PRI_CH; #if 0 /* Configure 20/25 spacing */ if (ht->ht_extprotspacing == HAL_HT_EXTPROTSPACING_25) phymode |= AR_PHY_FC_DYN2040_EXT_CH; #endif macmode = HAL_HT_MACMODE_2040; } else macmode = HAL_HT_MACMODE_20; OS_REG_WRITE(ah, AR_PHY_TURBO, phymode); /* Configure MAC for 20/40 operation */ ar5416Set11nMac2040(ah, macmode); /* global transmit timeout (25 TUs default)*/ /* XXX - put this elsewhere??? */ OS_REG_WRITE(ah, AR_GTXTO, 25 << AR_GTXTO_TIMEOUT_LIMIT_S) ; /* carrier sense timeout */ OS_REG_SET_BIT(ah, AR_GTTM, AR_GTTM_CST_USEC); OS_REG_WRITE(ah, AR_CST, 1 << AR_CST_TIMEOUT_LIMIT_S); } void ar5416GetChannelCenters(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *chan, CHAN_CENTERS *centers) { centers->ctl_center = chan->channel; centers->synth_center = chan->channel; /* * In 20/40 phy mode, the center frequency is * "between" the control and extension channels. */ if (chan->channelFlags & CHANNEL_HT40PLUS) { centers->synth_center += HT40_CHANNEL_CENTER_SHIFT; centers->ext_center = centers->synth_center + HT40_CHANNEL_CENTER_SHIFT; } else if (chan->channelFlags & CHANNEL_HT40MINUS) { centers->synth_center -= HT40_CHANNEL_CENTER_SHIFT; centers->ext_center = centers->synth_center - HT40_CHANNEL_CENTER_SHIFT; } else { centers->ext_center = chan->channel; } }