Context Navigation

kernel_init.c @ 683

Last change on this file since 683 was 683, checked in by alain, 4 years ago
All modifications required to support the <tcp_chat> application including error recovery in case of packet loss.A
File size: 65.6 KB

Line
1	/*
2	* kernel_init.c - kernel parallel initialization
3	*
4	* Authors : Mohamed Lamine Karaoui (2015)
5	* Alain Greiner (2016,2017,2018,2019,2020)
6	*
7	* Copyright (c) Sorbonne Universites
8	*
9	* This file is part of ALMOS-MKH.
10	*
11	* ALMOS-MKH is free software; you can redistribute it and/or modify it
12	* under the terms of the GNU General Public License as published by
13	* the Free Software Foundation; version 2.0 of the License.
14	*
15	* ALMOS-MKH is distributed in the hope that it will be useful, but
16	* WITHOUT ANY WARRANTY; without even the implied warranty of
17	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
18	* General Public License for more details.
19	*
20	* You should have received a copy of the GNU General Public License
21	* along with ALMOS-MKH; if not, write to the Free Software Foundation,
22	* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
23	*/
24
25	#include <kernel_config.h>
26	#include <errno.h>
27	#include <hal_kernel_types.h>
28	#include <hal_special.h>
29	#include <hal_context.h>
30	#include <hal_irqmask.h>
31	#include <hal_macros.h>
32	#include <hal_ppm.h>
33	#include <barrier.h>
34	#include <xbarrier.h>
35	#include <remote_fifo.h>
36	#include <core.h>
37	#include <list.h>
38	#include <xlist.h>
39	#include <xhtab.h>
40	#include <thread.h>
41	#include <scheduler.h>
42	#include <ksocket.h>
43	#include <kmem.h>
44	#include <cluster.h>
45	#include <string.h>
46	#include <memcpy.h>
47	#include <ppm.h>
48	#include <kcm.h>
49	#include <page.h>
50	#include <chdev.h>
51	#include <boot_info.h>
52	#include <dqdt.h>
53	#include <dev_mmc.h>
54	#include <dev_dma.h>
55	#include <dev_iob.h>
56	#include <dev_ioc.h>
57	#include <dev_txt.h>
58	#include <dev_pic.h>
59	#include <printk.h>
60	#include <vfs.h>
61	#include <devfs.h>
62	#include <mapper.h>
63
64	///////////////////////////////////////////////////////////////////////////////////////////
65	// All the following global variables are replicated in all clusters.
66	// They are initialised by the kernel_init() function.
67	//
68	// WARNING : The section names have been defined to control the base addresses of the
69	// boot_info structure and the idle thread descriptors, through the kernel.ld script:
70	// - the boot_info structure is built by the bootloader, and used by kernel_init.
71	// it must be the first object in the kdata segment.
72	// - the array of idle threads descriptors must be placed on the first page boundary after
73	// the boot_info structure in the kdata segment.
74	///////////////////////////////////////////////////////////////////////////////////////////
75
76	// This variable defines the local boot_info structure
77	__attribute__((section(".kinfo")))
78	boot_info_t boot_info;
79
80	// This variable defines the "idle" threads descriptors array
81	__attribute__((section(".kidle")))
82	char idle_threads[CONFIG_THREAD_DESC_SIZE *
83	CONFIG_MAX_LOCAL_CORES] CONFIG_PPM_PAGE_ALIGNED;
84
85	// This variable defines the local cluster manager
86	__attribute__((section(".kdata")))
87	cluster_t cluster_manager CONFIG_CACHE_LINE_ALIGNED;
88
89	// This variable defines the TXT_TX[0] chdev
90	__attribute__((section(".kdata")))
91	chdev_t txt0_tx_chdev CONFIG_CACHE_LINE_ALIGNED;
92
93	// This variable defines the TXT_RX[0] chdev
94	__attribute__((section(".kdata")))
95	chdev_t txt0_rx_chdev CONFIG_CACHE_LINE_ALIGNED;
96
97	// This variables define the kernel process0 descriptor
98	__attribute__((section(".kdata")))
99	process_t process_zero CONFIG_CACHE_LINE_ALIGNED;
100
101	// This variable defines a set of extended pointers on the distributed chdevs
102	__attribute__((section(".kdata")))
103	chdev_directory_t chdev_dir CONFIG_CACHE_LINE_ALIGNED;
104
105	// This variable contains the input IRQ indexes for the IOPIC controller
106	__attribute__((section(".kdata")))
107	iopic_input_t iopic_input CONFIG_CACHE_LINE_ALIGNED;
108
109	// This variable contains the input IRQ indexes for the LAPIC controller
110	__attribute__((section(".kdata")))
111	lapic_input_t lapic_input CONFIG_CACHE_LINE_ALIGNED;
112
113	// This variable defines the local cluster identifier
114	__attribute__((section(".kdata")))
115	cxy_t local_cxy CONFIG_CACHE_LINE_ALIGNED;
116
117	// This variable is used for core[0] cores synchronisation in kernel_init()
118	__attribute__((section(".kdata")))
119	xbarrier_t global_barrier CONFIG_CACHE_LINE_ALIGNED;
120
121	// This variable is used for local cores synchronisation in kernel_init()
122	__attribute__((section(".kdata")))
123	barrier_t local_barrier CONFIG_CACHE_LINE_ALIGNED;
124
125	// This variable defines the array of supported File System contexts
126	__attribute__((section(".kdata")))
127	vfs_ctx_t fs_context[FS_TYPES_NR] CONFIG_CACHE_LINE_ALIGNED;
128
129	// This array is used for debug, and describes the kernel locks usage,
130	// It must be kept consistent with the defines in kernel_config.h file.
131	__attribute__((section(".kdata")))
132	char * lock_type_str[] =
133	{
134	"unused_0", // 0 must be unused to help debug
135
136	"CLUSTER_KCM", // 1
137	"SCHED_STATE", // 2
138	"VMM_STACK", // 3
139	"VMM_MMAP", // 4
140	"KCM_STATE", // 5
141	"KHM_STATE", // 6
142	"HTAB_STATE", // 7
143	"CORE_ALARMS", // 8
144
145	"VFS_CTX", // 9
146	"PPM_FREE", // 10
147	"THREAD_JOIN", // 11
148	"XHTAB_STATE", // 12
149	"CHDEV_QUEUE", // 13
150	"CHDEV_TXT0", // 14
151	"CHDEV_TXTLIST", // 15
152	"PAGE_STATE", // 16
153	"MUTEX_STATE", // 17
154	"CONDVAR_STATE", // 18
155	"SEM_STATE", // 19
156	"PROCESS_CWD", // 20
157	"BARRIER_STATE", // 21
158	"LISTEN_SOCKET", // 22
159
160	"CLUSTER_PREFTBL", // 23
161
162	"SOCKET_STATE", // 24
163	"PPM_DIRTY", // 25
164	"CLUSTER_LOCALS", // 26
165	"CLUSTER_COPIES", // 27
166	"PROCESS_CHILDREN", // 28
167	"PROCESS_USERSYNC", // 29
168	"PROCESS_FDARRAY", // 30
169	"PROCESS_DIR", // 31
170	"VMM_VSL", // 32
171
172	"PROCESS_THTBL", // 33
173
174	"MAPPER_STATE", // 34
175	"VFS_SIZE", // 35
176	"VFS_FILE", // 36
177	"VFS_MAIN", // 37
178	"FATFS_FAT", // 38
179	"FBF_WINDOWS", // 39
180	};
181
182	// debug variables to analyse the sys_read() syscalls timing
183
184	#if DEBUG_SYS_READ
185	uint32_t enter_sys_read;
186	uint32_t exit_sys_read;
187
188	uint32_t enter_devfs_read;
189	uint32_t exit_devfs_read;
190
191	uint32_t enter_txt_read;
192	uint32_t exit_txt_read;
193
194	uint32_t enter_chdev_cmd_read;
195	uint32_t exit_chdev_cmd_read;
196
197	uint32_t enter_chdev_server_read;
198	uint32_t exit_chdev_server_read;
199
200	uint32_t enter_tty_cmd_read;
201	uint32_t exit_tty_cmd_read;
202
203	uint32_t enter_tty_isr_read;
204	uint32_t exit_tty_isr_read;
205	#endif
206
207	// debug variables to analyse the sys_write() syscall timing
208
209	#if DEBUG_SYS_WRITE
210	uint32_t enter_sys_write;
211	uint32_t exit_sys_write;
212
213	uint32_t enter_devfs_write;
214	uint32_t exit_devfs_write;
215
216	uint32_t enter_txt_write;
217	uint32_t exit_txt_write;
218
219	uint32_t enter_chdev_cmd_write;
220	uint32_t exit_chdev_cmd_write;
221
222	uint32_t enter_chdev_server_write;
223	uint32_t exit_chdev_server_write;
224
225	uint32_t enter_tty_cmd_write;
226	uint32_t exit_tty_cmd_write;
227
228	uint32_t enter_tty_isr_write;
229	uint32_t exit_tty_isr_write;
230	#endif
231
232	// intrumentation variables : cumulated costs per syscall type in cluster
233
234	#if CONFIG_INSTRUMENTATION_SYSCALLS
235	__attribute__((section(".kdata")))
236	uint32_t syscalls_cumul_cost[SYSCALLS_NR];
237
238	__attribute__((section(".kdata")))
239	uint32_t syscalls_occurences[SYSCALLS_NR];
240	#endif
241
242	///////////////////////////////////////////////////////////////////////////////////////////
243	// This function displays the ALMOS_MKH banner.
244	///////////////////////////////////////////////////////////////////////////////////////////
245	static void print_banner( uint32_t nclusters , uint32_t ncores )
246	{
247	printk("\n"
248	" _ __ __ _____ ______ __ __ _ __ _ _ \n"
249	" /\\ \| \| \| \\ / \| / ___ \\ / _____\| \| \\ / \| \| \| / / \| \| \| \| \n"
250	" / \\ \| \| \| \\/ \| \| / \\ \| \| / \| \\/ \| \| \|/ / \| \| \| \| \n"
251	" / /\\ \\ \| \| \| \|\\ /\| \| \| \| \| \| \| \|_____ ___ \| \|\\ /\| \| \| / \| \|___\| \| \n"
252	" / /__\\ \\ \| \| \| \| \\/ \| \| \| \| \| \| \\_____ \\ \|___\| \| \| \\/ \| \| \| \\ \| ___ \| \n"
253	" / ______ \\ \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|\\ \\ \| \| \| \| \n"
254	" / / \\ \\ \| \|____ \| \| \| \| \| \\___/ \| _____/ \| \| \| \| \| \| \| \\ \\ \| \| \| \| \n"
255	" /_/ \\_\\ \|______\| \|_\| \|_\| \\_____/ \|______/ \|_\| \|_\| \|_\| \\_\\ \|_\| \|_\| \n"
256	"\n\n\t\t Advanced Locality Management Operating System / Multi Kernel Hybrid\n"
257	"\n\n\t\t %s / %d cluster(s) / %d core(s) per cluster\n\n",
258	CONFIG_VERSION , nclusters , ncores );
259	}
260
261
262	///////////////////////////////////////////////////////////////////////////////////////////
263	// This function initializes the TXT_TX[0] and TXT_RX[0] chdev descriptors, implementing
264	// the "kernel terminal", shared by all kernel instances for debug messages.
265	// These chdev are implemented as global variables (replicated in all clusters),
266	// because this terminal is used before the kmem allocator initialisation, but only
267	// the chdevs in cluster 0 are registered in the "chdev_dir" directory.
268	// As this TXT0 chdev supports only the TXT_SYNC_WRITE command, we don't create
269	// a server thread, we don't allocate a WTI, and we don't initialize the waiting queue.
270	// Note: The TXT_RX[0] chdev is created, but is not used by ALMOS-MKH (september 2018).
271	///////////////////////////////////////////////////////////////////////////////////////////
272	// @ info : pointer on the local boot-info structure.
273	///////////////////////////////////////////////////////////////////////////////////////////
274	static void __attribute__ ((noinline)) txt0_device_init( boot_info_t * info )
275	{
276	boot_device_t * dev_tbl; // pointer on array of devices in boot_info
277	uint32_t dev_nr; // actual number of devices in this cluster
278	xptr_t base; // remote pointer on segment base
279	uint32_t func; // device functional index
280	uint32_t impl; // device implementation index
281	uint32_t i; // device index in dev_tbl
282	uint32_t x; // X cluster coordinate
283	uint32_t y; // Y cluster coordinate
284
285	// get number of peripherals and base of devices array from boot_info
286	dev_nr = info->ext_dev_nr;
287	dev_tbl = info->ext_dev;
288
289	// loop on external peripherals to find TXT device
290	for( i = 0 ; i < dev_nr ; i++ )
291	{
292	base = dev_tbl[i].base;
293	func = FUNC_FROM_TYPE( dev_tbl[i].type );
294	impl = IMPL_FROM_TYPE( dev_tbl[i].type );
295
296	if (func == DEV_FUNC_TXT )
297	{
298	// initialize TXT_TX[0] chdev
299	txt0_tx_chdev.func = func;
300	txt0_tx_chdev.impl = impl;
301	txt0_tx_chdev.channel = 0;
302	txt0_tx_chdev.base = base;
303	txt0_tx_chdev.is_rx = false;
304	remote_busylock_init( XPTR( local_cxy , &txt0_tx_chdev.wait_lock ),
305	LOCK_CHDEV_TXT0 );
306
307	// make TXT specific initialisations
308	dev_txt_init( &txt0_tx_chdev );
309
310	// initialize TXT_RX[0] chdev
311	txt0_rx_chdev.func = func;
312	txt0_rx_chdev.impl = impl;
313	txt0_rx_chdev.channel = 0;
314	txt0_rx_chdev.base = base;
315	txt0_rx_chdev.is_rx = true;
316	remote_busylock_init( XPTR( local_cxy , &txt0_rx_chdev.wait_lock ),
317	LOCK_CHDEV_TXT0 );
318
319	// make TXT specific initialisations
320	dev_txt_init( &txt0_rx_chdev );
321
322	// register TXT_TX[0] & TXT_RX[0] in chdev_dir[x][y]
323	// for all valid clusters
324	for( x = 0 ; x < info->x_size ; x++ )
325	{
326	for( y = 0 ; y < info->y_size ; y++ )
327	{
328	cxy_t cxy = HAL_CXY_FROM_XY( x , y );
329
330	if( cluster_is_active( cxy ) )
331	{
332	hal_remote_s64( XPTR( cxy , &chdev_dir.txt_tx[0] ) ,
333	XPTR( local_cxy , &txt0_tx_chdev ) );
334	hal_remote_s64( XPTR( cxy , &chdev_dir.txt_rx[0] ) ,
335	XPTR( local_cxy , &txt0_rx_chdev ) );
336	}
337	}
338	}
339
340	hal_fence();
341	}
342	} // end loop on devices
343	} // end txt0_device_init()
344
345	///////////////////////////////////////////////////////////////////////////////////////////
346	// This function allocates memory and initializes the chdev descriptors for the internal
347	// peripherals contained in the local cluster, other than the LAPIC, as specified by
348	// the boot_info, including the linking with the driver for the specified implementation.
349	// The relevant entries in all copies of the devices directory are initialised.
350	///////////////////////////////////////////////////////////////////////////////////////////
351	// @ info : pointer on the local boot-info structure.
352	///////////////////////////////////////////////////////////////////////////////////////////
353	static void __attribute__ ((noinline)) internal_devices_init( boot_info_t * info )
354	{
355	boot_device_t * dev_tbl; // pointer on array of internaldevices in boot_info
356	uint32_t dev_nr; // actual number of devices in this cluster
357	xptr_t base; // remote pointer on segment base
358	uint32_t func; // device functionnal index
359	uint32_t impl; // device implementation index
360	uint32_t i; // device index in dev_tbl
361	uint32_t x; // X cluster coordinate
362	uint32_t y; // Y cluster coordinate
363	uint32_t channels; // number of channels
364	uint32_t channel; // channel index
365	chdev_t * chdev_ptr; // local pointer on created chdev
366
367	// get number of internal peripherals and base from boot_info
368	dev_nr = info->int_dev_nr;
369	dev_tbl = info->int_dev;
370
371	// loop on internal peripherals
372	for( i = 0 ; i < dev_nr ; i++ )
373	{
374	base = dev_tbl[i].base;
375	channels = dev_tbl[i].channels;
376	func = FUNC_FROM_TYPE( dev_tbl[i].type );
377	impl = IMPL_FROM_TYPE( dev_tbl[i].type );
378
379	//////////////////////////
380	if( func == DEV_FUNC_MMC )
381	{
382	// create chdev in local cluster
383	chdev_ptr = chdev_create( func,
384	impl,
385	0, // channel
386	false, // direction
387	base );
388	if( chdev_ptr == NULL )
389	{
390	printk("\n[PANIC] in %s : cannot create MMC chdev\n",
391	__FUNCTION__ );
392	hal_core_sleep();
393	}
394
395	#if (DEBUG_KERNEL_INIT & 0x1)
396	if( hal_time_stamp() > DEBUG_KERNEL_INIT )
397	printk("\n[%s] created chdev[%x,%x] for MMC\n",
398	__FUNCTION__ , local_cxy , chdev_ptr );
399	#endif
400	// make MMC specific initialisation
401	dev_mmc_init( chdev_ptr );
402
403	// set the MMC field in all chdev_dir[x][y] structures
404	for( x = 0 ; x < info->x_size ; x++ )
405	{
406	for( y = 0 ; y < info->y_size ; y++ )
407	{
408	cxy_t cxy = HAL_CXY_FROM_XY( x , y );
409
410	if( cluster_is_active( cxy ) )
411	{
412	hal_remote_s64( XPTR( cxy , &chdev_dir.mmc[local_cxy] ),
413	XPTR( local_cxy , chdev_ptr ) );
414	}
415	}
416	}
417
418	#if( DEBUG_KERNEL_INIT & 0x1 )
419	if( hal_time_stamp() > DEBUG_KERNEL_INIT )
420	printk("\n[%s] initialised chdev[%x,%x] for MMC\n",
421	__FUNCTION__ , local_cxy , chdev_ptr );
422	#endif
423	}
424	///////////////////////////////
425	else if( func == DEV_FUNC_DMA )
426	{
427	// create one chdev per channel in local cluster
428	for( channel = 0 ; channel < channels ; channel++ )
429	{
430	// create chdev[channel] in local cluster
431	chdev_ptr = chdev_create( func,
432	impl,
433	channel,
434	false, // direction
435	base );
436	if( chdev_ptr == NULL )
437	{
438	printk("\n[PANIC] in %s : cannot create DMA chdev\n",
439	__FUNCTION__ );
440	hal_core_sleep();
441	}
442
443	#if (DEBUG_KERNEL_INIT & 0x1)
444	if( hal_time_stamp() > DEBUG_KERNEL_INIT )
445	printk("\n[%s] cxy %x : created chdev[%x,%x] for DMA[%d]\n",
446	__FUNCTION__ , local_cxy , chdev_ptr , channel );
447	#endif
448	// make DMA specific initialisation
449	dev_dma_init( chdev_ptr );
450
451	// initialize only the DMA[channel] field in the local chdev_dir[x][y]
452	// structure because the DMA device is not remotely accessible.
453	chdev_dir.dma[channel] = XPTR( local_cxy , chdev_ptr );
454
455	#if( DEBUG_KERNEL_INIT & 0x1 )
456	if( hal_time_stamp() > DEBUG_KERNEL_INIT )
457	printk("\n[%s] initialised chdev[%x,%x] for DMA[%d]\n",
458	__FUNCTION__ , local_cxy , chdev_ptr , channel );
459	#endif
460	}
461	}
462	}
463	} // end internal_devices_init()
464
465	///////////////////////////////////////////////////////////////////////////////////////////
466	// This function allocates memory and initializes the chdev descriptors for the
467	// external (shared) peripherals other than the IOPIC, as specified by the boot_info.
468	// This includes the dynamic linking with the driver for the specified implementation.
469	// These chdev descriptors are distributed on all clusters, using a modulo on a global
470	// index, identically computed in all clusters.
471	// This function is executed in all clusters by the core[0], that computes a global index
472	// for all external chdevs. Each core[0] core creates only the chdevs that must be placed
473	// in the local cluster, because the global index matches the local index.
474	// The relevant entries in all copies of the devices directory are initialised.
475	///////////////////////////////////////////////////////////////////////////////////////////
476	// @ info : pointer on the local boot-info structure.
477	///////////////////////////////////////////////////////////////////////////////////////////
478	static void external_devices_init( boot_info_t * info )
479	{
480	boot_device_t * dev_tbl; // pointer on array of external devices in boot_info
481	uint32_t dev_nr; // actual number of external devices
482	xptr_t base; // remote pointer on segment base
483	uint32_t func; // device functionnal index
484	uint32_t impl; // device implementation index
485	uint32_t i; // device index in dev_tbl
486	uint32_t x; // X cluster coordinate
487	uint32_t y; // Y cluster coordinate
488	uint32_t channels; // number of channels
489	uint32_t channel; // channel index
490	uint32_t directions; // number of directions (1 or 2)
491	uint32_t rx; // direction index (0 or 1)
492	chdev_t * chdev; // local pointer on one channel_device descriptor
493	uint32_t ext_chdev_gid; // global index of external chdev
494
495	// get number of peripherals and base of devices array from boot_info
496	dev_nr = info->ext_dev_nr;
497	dev_tbl = info->ext_dev;
498
499	// initializes global index (PIC is already placed in cluster 0)
500	ext_chdev_gid = 1;
501
502	// loop on external peripherals
503	for( i = 0 ; i < dev_nr ; i++ )
504	{
505	base = dev_tbl[i].base;
506	channels = dev_tbl[i].channels;
507	func = FUNC_FROM_TYPE( dev_tbl[i].type );
508	impl = IMPL_FROM_TYPE( dev_tbl[i].type );
509
510	// There is one chdev per direction for NIC and for TXT
511	if((func == DEV_FUNC_NIC) \|\| (func == DEV_FUNC_TXT)) directions = 2;
512	else directions = 1;
513
514	// do nothing for ROM, that does not require a device descriptor.
515	if( func == DEV_FUNC_ROM ) continue;
516
517	// do nothing for PIC, that is already initialized
518	if( func == DEV_FUNC_PIC ) continue;
519
520	// check PIC device initialized
521	if( chdev_dir.pic == XPTR_NULL )
522	{
523	printk("\n[PANIC] in %s : PIC device must be initialized first\n",
524	__FUNCTION__ );
525	hal_core_sleep();
526	}
527
528	// check external device functionnal type
529	if( (func != DEV_FUNC_IOB) &&
530	(func != DEV_FUNC_IOC) &&
531	(func != DEV_FUNC_TXT) &&
532	(func != DEV_FUNC_NIC) &&
533	(func != DEV_FUNC_FBF) )
534	{
535	printk("\n[PANIC] in %s : undefined peripheral type\n",
536	__FUNCTION__ );
537	hal_core_sleep();
538	}
539
540	// loop on channels
541	for( channel = 0 ; channel < channels ; channel++ )
542	{
543	// loop on directions
544	for( rx = 0 ; rx < directions ; rx++ )
545	{
546	// skip TXT0 that has already been initialized
547	if( (func == DEV_FUNC_TXT) && (channel == 0) ) continue;
548
549	// all kernel instances compute the target cluster for all chdevs,
550	// and the global index ext_chdev_gid[func,channel,direction]
551	cxy_t target_cxy;
552	while( 1 )
553	{
554	uint32_t offset = ext_chdev_gid % ( info->x_size * info->y_size );
555	uint32_t x = offset / info->y_size;
556	uint32_t y = offset % info->y_size;
557
558	target_cxy = HAL_CXY_FROM_XY( x , y );
559
560	// exit loop if target cluster is active
561	if( cluster_is_active( target_cxy ) ) break;
562
563	// increment global index otherwise
564	ext_chdev_gid++;
565	}
566
567	// allocate and initialize a local chdev
568	// when local cluster matches target cluster
569	if( target_cxy == local_cxy )
570	{
571	chdev = chdev_create( func,
572	impl,
573	channel,
574	rx, // direction
575	base );
576
577	if( chdev == NULL )
578	{
579	printk("\n[PANIC] in %s : cannot allocate chdev\n",
580	__FUNCTION__ );
581	hal_core_sleep();
582	}
583
584	#if (DEBUG_KERNEL_INIT & 0x1)
585	if( hal_time_stamp() > DEBUG_KERNEL_INIT )
586	printk("\n[%s] created chdev[%x,%x] for %s[%d] / is_rx %d\n",
587	__FUNCTION__ , local_cxy , chdev , chdev_func_str(func) , channel , rx );
588	#endif
589	// make device type specific initialisation
590	if ( func == DEV_FUNC_IOB ) dev_iob_init( chdev );
591	else if( func == DEV_FUNC_IOC ) dev_ioc_init( chdev );
592	else if( func == DEV_FUNC_TXT ) dev_txt_init( chdev );
593	else if( func == DEV_FUNC_NIC ) dev_nic_init( chdev );
594	else if( func == DEV_FUNC_FBF ) dev_fbf_init( chdev );
595
596	// all external (shared) devices are remotely accessible
597	// initialize the replicated chdev_dir[x][y] structures
598	// defining the extended pointers on chdev descriptors
599	xptr_t * entry = NULL;
600
601	if(func==DEV_FUNC_IOB ) entry = &chdev_dir.iob;
602	if(func==DEV_FUNC_IOC ) entry = &chdev_dir.ioc[channel];
603	if(func==DEV_FUNC_FBF ) entry = &chdev_dir.fbf[channel];
604	if((func==DEV_FUNC_TXT) && (rx==0)) entry = &chdev_dir.txt_tx[channel];
605	if((func==DEV_FUNC_TXT) && (rx==1)) entry = &chdev_dir.txt_rx[channel];
606	if((func==DEV_FUNC_NIC) && (rx==0)) entry = &chdev_dir.nic_tx[channel];
607	if((func==DEV_FUNC_NIC) && (rx==1)) entry = &chdev_dir.nic_rx[channel];
608
609	for( x = 0 ; x < info->x_size ; x++ )
610	{
611	for( y = 0 ; y < info->y_size ; y++ )
612	{
613	cxy_t cxy = HAL_CXY_FROM_XY( x , y );
614
615	if( cluster_is_active( cxy ) && ( entry != NULL ) )
616	{
617	hal_remote_s64( XPTR( cxy , entry ),
618	XPTR( local_cxy , chdev ) );
619	}
620	}
621	}
622
623	#if( DEBUG_KERNEL_INIT & 1 )
624	if( hal_time_stamp() > DEBUG_KERNEL_INIT )
625	printk("\n[%s] initialised chdev[%x,%x] for %s\n",
626	__FUNCTION__ , local_cxy, chdev , chdev->name );
627	#endif
628
629	} // end if match
630
631	// increment chdev global index (matching or not)
632	ext_chdev_gid++;
633
634	} // end loop on directions
635	} // end loop on channels
636	} // end loop on devices
637	} // end external_devices_init()
638
639	///////////////////////////////////////////////////////////////////////////////////////////
640	// This function is called by core[0][0] to allocate memory and initialize the PIC
641	// device, namely the informations attached to the external IOPIC controller, that
642	// must be replicated in all clusters (struct iopic_input).
643	// This initialisation must be done before other devices initialisation because the IRQ
644	// routing infrastructure is required for both internal and external devices init.
645	///////////////////////////////////////////////////////////////////////////////////////////
646	// @ info : pointer on the local boot-info structure.
647	///////////////////////////////////////////////////////////////////////////////////////////
648	static void __attribute__ ((noinline)) iopic_init( boot_info_t * info )
649	{
650	boot_device_t * dev_tbl; // pointer on boot_info external devices array
651	uint32_t dev_nr; // actual number of external devices
652	xptr_t base; // remote pointer on segment base
653	uint32_t func; // device functionnal index
654	uint32_t impl; // device implementation index
655	uint32_t i; // device index in dev_tbl
656	uint32_t x; // cluster X coordinate
657	uint32_t y; // cluster Y coordinate
658	bool_t found; // IOPIC found
659	chdev_t * chdev; // pointer on PIC chdev descriptor
660
661	// get number of external peripherals and base of array from boot_info
662	dev_nr = info->ext_dev_nr;
663	dev_tbl = info->ext_dev;
664
665	// avoid GCC warning
666	base = XPTR_NULL;
667	impl = 0;
668
669	// loop on external peripherals to get the IOPIC
670	for( i = 0 , found = false ; i < dev_nr ; i++ )
671	{
672	func = FUNC_FROM_TYPE( dev_tbl[i].type );
673
674	if( func == DEV_FUNC_PIC )
675	{
676	base = dev_tbl[i].base;
677	impl = IMPL_FROM_TYPE( dev_tbl[i].type );
678	found = true;
679	break;
680	}
681	}
682
683	// check PIC existence
684	if( found == false )
685	{
686	printk("\n[PANIC] in %s : PIC device not found\n",
687	__FUNCTION__ );
688	hal_core_sleep();
689	}
690
691	// allocate and initialize the PIC chdev in cluster 0
692	chdev = chdev_create( DEV_FUNC_PIC,
693	impl,
694	0, // channel
695	0, // direction,
696	base );
697
698	// check memory
699	if( chdev == NULL )
700	{
701	printk("\n[PANIC] in %s : no memory for PIC chdev\n",
702	__FUNCTION__ );
703	hal_core_sleep();
704	}
705
706	// make PIC device type specific initialisation
707	dev_pic_init( chdev );
708
709	// register, in all clusters, the extended pointer
710	// on PIC chdev in "chdev_dir" array
711	xptr_t * entry = &chdev_dir.pic;
712
713	for( x = 0 ; x < info->x_size ; x++ )
714	{
715	for( y = 0 ; y < info->y_size ; y++ )
716	{
717	cxy_t cxy = HAL_CXY_FROM_XY( x , y );
718
719	if( cluster_is_active( cxy ) )
720	{
721	hal_remote_s64( XPTR( cxy , entry ) ,
722	XPTR( local_cxy , chdev ) );
723	}
724	}
725	}
726
727	// initialize, in all clusters, the "iopic_input" structure
728	// defining how external IRQs are connected to IOPIC
729
730	// register default value for unused inputs
731	for( x = 0 ; x < info->x_size ; x++ )
732	{
733	for( y = 0 ; y < info->y_size ; y++ )
734	{
735	cxy_t cxy = HAL_CXY_FROM_XY( x , y );
736
737	if( cluster_is_active( cxy ) )
738	{
739	hal_remote_memset( XPTR( cxy , &iopic_input ),
740	0xFF , sizeof(iopic_input_t) );
741	}
742	}
743	}
744
745	// register input IRQ index for valid inputs
746	uint32_t id; // input IRQ index
747	uint8_t valid; // input IRQ is connected
748	uint32_t type; // source device type
749	uint8_t channel; // source device channel
750	uint8_t is_rx; // source device direction
751	uint32_t * ptr = NULL; // local pointer on one field in iopic_input stucture
752
753	for( id = 0 ; id < CONFIG_MAX_EXTERNAL_IRQS ; id++ )
754	{
755	valid = dev_tbl[i].irq[id].valid;
756	type = dev_tbl[i].irq[id].dev_type;
757	channel = dev_tbl[i].irq[id].channel;
758	is_rx = dev_tbl[i].irq[id].is_rx;
759	func = FUNC_FROM_TYPE( type );
760
761	// get pointer on relevant field in iopic_input
762	if( valid )
763	{
764	if ( func == DEV_FUNC_IOC ) ptr = &iopic_input.ioc[channel];
765	else if((func == DEV_FUNC_TXT) && (is_rx == 0)) ptr = &iopic_input.txt_tx[channel];
766	else if((func == DEV_FUNC_TXT) && (is_rx != 0)) ptr = &iopic_input.txt_rx[channel];
767	else if((func == DEV_FUNC_NIC) && (is_rx == 0)) ptr = &iopic_input.nic_tx[channel];
768	else if((func == DEV_FUNC_NIC) && (is_rx != 0)) ptr = &iopic_input.nic_rx[channel];
769	else if( func == DEV_FUNC_IOB ) ptr = &iopic_input.iob;
770	else
771	{
772	printk("\n[PANIC] in %s : illegal source device for IOPIC input\n",
773	__FUNCTION__ );
774	hal_core_sleep();
775	}
776
777	// set one entry in all "iopic_input" structures
778	for( x = 0 ; x < info->x_size ; x++ )
779	{
780	for( y = 0 ; y < info->y_size ; y++ )
781	{
782	cxy_t cxy = HAL_CXY_FROM_XY( x , y );
783
784	if( cluster_is_active( cxy ) )
785	{
786	hal_remote_s64( XPTR( cxy , ptr ) , id );
787	}
788	}
789	}
790	}
791	}
792
793	#if( DEBUG_KERNEL_INIT & 0x1 )
794	if( hal_time_stamp() > DEBUG_KERNEL_INIT )
795	{
796	printk("\n[%s] created PIC chdev in cluster %x at cycle %d\n",
797	__FUNCTION__ , local_cxy , (uint32_t)hal_time_stamp() );
798	dev_pic_inputs_display();
799	}
800	#endif
801
802	} // end iopic_init()
803
804	///////////////////////////////////////////////////////////////////////////////////////////
805	// This function is called by all core[0]s in all cluster to complete the PIC device
806	// initialisation, namely the informations attached to the LAPIC controller.
807	// This initialisation must be done after the IOPIC initialisation, but before other
808	// devices initialisation because the IRQ routing infrastructure is required for both
809	// internal and external devices initialisation.
810	///////////////////////////////////////////////////////////////////////////////////////////
811	// @ info : pointer on the local boot-info structure.
812	///////////////////////////////////////////////////////////////////////////////////////////
813	static void __attribute__ ((noinline)) lapic_init( boot_info_t * info )
814	{
815	boot_device_t * dev_tbl; // pointer on boot_info internal devices array
816	uint32_t dev_nr; // number of internal devices
817	uint32_t i; // device index in dev_tbl
818	xptr_t base; // remote pointer on segment base
819	uint32_t func; // device functionnal type in boot_info
820	bool_t found; // LAPIC found
821
822	// get number of internal peripherals and base
823	dev_nr = info->int_dev_nr;
824	dev_tbl = info->int_dev;
825
826	// loop on internal peripherals to get the lapic device
827	for( i = 0 , found = false ; i < dev_nr ; i++ )
828	{
829	func = FUNC_FROM_TYPE( dev_tbl[i].type );
830
831	if( func == DEV_FUNC_ICU )
832	{
833	base = dev_tbl[i].base;
834	found = true;
835	break;
836	}
837	}
838
839	// if the LAPIC controller is not defined in the boot_info,
840	// we simply don't initialize the PIC extensions in the kernel,
841	// making the assumption that the LAPIC related informations
842	// are hidden in the hardware specific PIC driver.
843	if( found )
844	{
845	// initialise the PIC extensions for
846	// the core descriptor and core manager extensions
847	dev_pic_extend_init( (uint32_t *)GET_PTR( base ) );
848
849	// initialize the "lapic_input" structure
850	// defining how internal IRQs are connected to LAPIC
851	uint32_t id;
852	uint8_t valid;
853	uint8_t channel;
854	uint32_t func;
855
856	for( id = 0 ; id < CONFIG_MAX_INTERNAL_IRQS ; id++ )
857	{
858	valid = dev_tbl[i].irq[id].valid;
859	func = FUNC_FROM_TYPE( dev_tbl[i].irq[id].dev_type );
860	channel = dev_tbl[i].irq[id].channel;
861
862	if( valid ) // only valid local IRQs are registered
863	{
864	if ( func == DEV_FUNC_MMC ) lapic_input.mmc = id;
865	else if( func == DEV_FUNC_DMA ) lapic_input.dma[channel] = id;
866	else
867	{
868	printk("\n[PANIC] in %s : illegal source device for LAPIC input\n",
869	__FUNCTION__ );
870	hal_core_sleep();
871	}
872	}
873	}
874	}
875	} // end lapic_init()
876
877	///////////////////////////////////////////////////////////////////////////////////////////
878	// This static function returns the identifiers of the calling core.
879	///////////////////////////////////////////////////////////////////////////////////////////
880	// @ info : pointer on boot_info structure.
881	// @ lid : [out] core local index in cluster.
882	// @ cxy : [out] cluster identifier.
883	// @ lid : [out] core global identifier (hardware).
884	// @ return 0 if success / return -1 if not found.
885	///////////////////////////////////////////////////////////////////////////////////////////
886	static error_t __attribute__ ((noinline)) get_core_identifiers( boot_info_t * info,
887	lid_t * lid,
888	cxy_t * cxy,
889	gid_t * gid )
890	{
891	uint32_t i;
892	gid_t global_id;
893
894	// get global identifier from hardware register
895	global_id = hal_get_gid();
896
897	// makes an associative search in boot_info to get (cxy,lid) from global_id
898	for( i = 0 ; i < info->cores_nr ; i++ )
899	{
900	if( global_id == info->core[i].gid )
901	{
902	*lid = info->core[i].lid;
903	*cxy = info->core[i].cxy;
904	*gid = global_id;
905	return 0;
906	}
907	}
908	return -1;
909	}
910
911
912
913
914
915	///////////////////////////////////////////////////////////////////////////////////////////
916	// This function is the entry point for the kernel initialisation.
917	// It is executed by all cores in all clusters, but only core[cxy][0] initializes
918	// the shared resources such as the cluster manager, or the local peripherals.
919	// To comply with the multi-kernels paradigm, it accesses only local cluster memory, using
920	// only information contained in the local boot_info_t structure, set by the bootloader.
921	// Only core[0] in cluster 0 print the log messages.
922	///////////////////////////////////////////////////////////////////////////////////////////
923	// @ info : pointer on the local boot-info structure.
924	///////////////////////////////////////////////////////////////////////////////////////////
925	void kernel_init( boot_info_t * info )
926	{
927	lid_t core_lid = -1; // running core local index
928	cxy_t core_cxy = -1; // running core cluster identifier
929	gid_t core_gid; // running core hardware identifier
930	cluster_t * cluster; // pointer on local cluster manager
931	core_t * core; // pointer on running core descriptor
932	thread_t * thread; // pointer on idle thread descriptor
933
934	xptr_t vfs_root_inode_xp; // extended pointer on VFS root inode
935	xptr_t devfs_dev_inode_xp; // extended pointer on DEVFS dev inode
936	xptr_t devfs_external_inode_xp; // extended pointer on DEVFS external inode
937
938	error_t error;
939	reg_t status; // running core status register
940
941	/////////////////////////////////////////////////////////////////////////////////
942	// STEP 1 : Each core get its core identifier from boot_info, and makes
943	// a partial initialisation of its private idle thread descriptor.
944	// core[0] initializes the "local_cxy" global variable.
945	// core[0] in cluster[0] initializes the TXT0 chdev for log messages.
946	/////////////////////////////////////////////////////////////////////////////////
947
948	error = get_core_identifiers( info,
949	&core_lid,
950	&core_cxy,
951	&core_gid );
952
953	// core[0] initialize cluster identifier
954	if( core_lid == 0 ) local_cxy = info->cxy;
955
956	// each core gets a pointer on its private idle thread descriptor
957	thread = (thread_t )( idle_threads + (core_lid CONFIG_THREAD_DESC_SIZE) );
958
959	// each core registers this thread pointer in hardware register
960	hal_set_current_thread( thread );
961
962	// each core register core descriptor pointer in idle thread descriptor
963	thread->core = &LOCAL_CLUSTER->core_tbl[core_lid];
964
965	// each core initializes the idle thread locks counters
966	thread->busylocks = 0;
967
968	#if DEBUG_BUSYLOCK
969	// each core initialise the idle thread list of busylocks
970	xlist_root_init( XPTR( local_cxy , &thread->busylocks_root ) );
971	#endif
972
973	// core[0] initializes cluster info
974	if( core_lid == 0 ) cluster_info_init( info );
975
976	// core[0] in cluster[0] initialises TXT0 chdev descriptor
977	if( (core_lid == 0) && (core_cxy == 0) ) txt0_device_init( info );
978
979	// all cores check identifiers
980	if( error )
981	{
982	printk("\n[PANIC] in %s : illegal core : gid %x / cxy %x / lid %d",
983	__FUNCTION__, core_lid, core_cxy, core_lid );
984	hal_core_sleep();
985	}
986
987	/////////////////////////////////////////////////////////////////////////////////
988	if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ),
989	(info->x_size * info->y_size) );
990	barrier_wait( &local_barrier , info->cores_nr );
991	/////////////////////////////////////////////////////////////////////////////////
992
993	#if DEBUG_KERNEL_INIT
994	if( (core_lid == 0) & (local_cxy == 0) )
995	printk("\n[%s] exit barrier 1 : TXT0 initialized / cycle %d\n",
996	__FUNCTION__, (uint32_t)hal_get_cycles() );
997	#endif
998
999	/////////////////////////////////////////////////////////////////////////////////
1000	// STEP 2 : core[0] initializes the cluster manager,
1001	// including the physical memory allocators.
1002	/////////////////////////////////////////////////////////////////////////////////
1003
1004	// core[0] initialises DQDT (only core[0][0] build the quad-tree)
1005	if( core_lid == 0 ) dqdt_init();
1006
1007	// core[0] initialize other cluster manager complex structures
1008	if( core_lid == 0 )
1009	{
1010	error = cluster_manager_init( info );
1011
1012	if( error )
1013	{
1014	printk("\n[PANIC] in %s : cannot initialize cluster manager in cluster %x\n",
1015	__FUNCTION__, local_cxy );
1016	hal_core_sleep();
1017	}
1018	}
1019
1020	/////////////////////////////////////////////////////////////////////////////////
1021	if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ),
1022	(info->x_size * info->y_size) );
1023	barrier_wait( &local_barrier , info->cores_nr );
1024	/////////////////////////////////////////////////////////////////////////////////
1025
1026	#if DEBUG_KERNEL_INIT
1027	if( (core_lid == 0) & (local_cxy == 0) )
1028	printk("\n[%s] exit barrier 2 : cluster manager initialized / cycle %d\n",
1029	__FUNCTION__, (uint32_t)hal_get_cycles() );
1030	#endif
1031
1032	/////////////////////////////////////////////////////////////////////////////////
1033	// STEP 3 : all cores initialize the idle thread descriptor.
1034	// core[0] initializes the process_zero descriptor,
1035	// including the kernel VMM (both GPT and VSL)
1036	/////////////////////////////////////////////////////////////////////////////////
1037
1038	// all cores get pointer on local cluster manager & core descriptor
1039	cluster = &cluster_manager;
1040	core = &cluster->core_tbl[core_lid];
1041
1042	// all cores update the register(s) defining the kernel
1043	// entry points for interrupts, exceptions and syscalls,
1044	// this must be done before VFS initialisation, because
1045	// kernel_init() uses RPCs requiring IPIs...
1046	hal_set_kentry();
1047
1048	// all cores initialize the idle thread descriptor
1049	thread_idle_init( thread,
1050	THREAD_IDLE,
1051	&thread_idle_func,
1052	NULL,
1053	core_lid );
1054
1055	// core[0] initializes the process_zero descriptor,
1056	if( core_lid == 0 ) process_zero_create( &process_zero , info );
1057
1058	/////////////////////////////////////////////////////////////////////////////////
1059	if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ),
1060	(info->x_size * info->y_size) );
1061	barrier_wait( &local_barrier , info->cores_nr );
1062	/////////////////////////////////////////////////////////////////////////////////
1063
1064	#if DEBUG_KERNEL_INIT
1065	if( (core_lid == 0) & (local_cxy == 0) )
1066	printk("\n[%s] exit barrier 3 : kernel processs initialized / cycle %d\n",
1067	__FUNCTION__, (uint32_t)hal_get_cycles() );
1068	#endif
1069
1070	/////////////////////////////////////////////////////////////////////////////////
1071	// STEP 4 : all cores initialize their private MMU
1072	// core[0] in cluster 0 initializes the IOPIC device.
1073	/////////////////////////////////////////////////////////////////////////////////
1074
1075	// all cores initialise their MMU
1076	hal_mmu_init( &process_zero.vmm.gpt );
1077
1078	// core[0] in cluster[0] initializes the PIC chdev,
1079	if( (core_lid == 0) && (local_cxy == 0) ) iopic_init( info );
1080
1081	////////////////////////////////////////////////////////////////////////////////
1082	if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ),
1083	(info->x_size * info->y_size) );
1084	barrier_wait( &local_barrier , info->cores_nr );
1085	////////////////////////////////////////////////////////////////////////////////
1086
1087	#if DEBUG_KERNEL_INIT
1088	if( (core_lid == 0) & (local_cxy == 0) )
1089	printk("\n[%s] exit barrier 4 : MMU and IOPIC initialized / cycle %d\n",
1090	__FUNCTION__, (uint32_t)hal_get_cycles() );
1091	#endif
1092
1093	////////////////////////////////////////////////////////////////////////////////
1094	// STEP 5 : core[0] initialize the distibuted LAPIC descriptor.
1095	// core[0] initialize the internal chdev descriptors
1096	// core[0] initialize the local external chdev descriptors
1097	////////////////////////////////////////////////////////////////////////////////
1098
1099	// all core[0]s initialize their local LAPIC extension,
1100	if( core_lid == 0 ) lapic_init( info );
1101
1102	// core[0] scan the internal (private) peripherals,
1103	// and allocates memory for the corresponding chdev descriptors.
1104	if( core_lid == 0 ) internal_devices_init( info );
1105
1106	// All core[0]s contribute to initialise external peripheral chdev descriptors.
1107	// Each core[0][cxy] scan the set of external (shared) peripherals (but the TXT0),
1108	// and allocates memory for the chdev descriptors that must be placed
1109	// on the (cxy) cluster according to the global index value.
1110
1111	if( core_lid == 0 ) external_devices_init( info );
1112
1113	/////////////////////////////////////////////////////////////////////////////////
1114	if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ),
1115	(info->x_size * info->y_size) );
1116	barrier_wait( &local_barrier , info->cores_nr );
1117	/////////////////////////////////////////////////////////////////////////////////
1118
1119	#if DEBUG_KERNEL_INIT
1120	if( (core_lid == 0) & (local_cxy == 0) )
1121	printk("\n[%s] exit barrier 5 : chdevs initialised / cycle %d\n",
1122	__FUNCTION__, (uint32_t)hal_get_cycles() );
1123	#endif
1124
1125	#if CONFIG_INSTRUMENTATION_CHDEVS
1126	if( (core_lid == 0) & (local_cxy == 0) )
1127	chdev_dir_display();
1128	#endif
1129
1130	/////////////////////////////////////////////////////////////////////////////////
1131	// STEP 6 : All cores enable IPI (Inter Procesor Interrupt),
1132	// All cores unblock the idle thread, and register it in scheduler.
1133	// The core[0] in cluster defined by the CONFIG_VFS_ROOT_CXY parameter,
1134	// access the IOC device to initialize the VFS for the FS identified
1135	// by the CONFIG_VFS_ROOT_IS_*** parameter. It does the following
1136	// actions in the VFS_ROOT cluster :
1137	// 1. allocate and initialize the selected FS context,
1138	// 2. create and initializes the VFS root inodes,
1139	// 3. initialize the VFS context for FATFS (in fs_context[] array),
1140	// 4. create the <.> and <..> dentries in VFS root directory,
1141	// 5. register the VFS root inode in process_zero descriptor,
1142	// 6. allocate the DEVFS context,
1143	// 7. initialize the VFS context for DEVFS (in fs_context[] array),
1144	// 8. create the <dev> and <external> inodes,
1145	// 9. initialize the DEVFS context.
1146	/////////////////////////////////////////////////////////////////////////////////
1147
1148	// All cores enable IPI
1149	dev_pic_enable_ipi();
1150	hal_enable_irq( &status );
1151
1152	// all cores unblock the idle thread, and register it in scheduler
1153	thread_unblock( XPTR( local_cxy , thread ) , THREAD_BLOCKED_GLOBAL );
1154	core->scheduler.idle = thread;
1155
1156	// core[O] in VFS_ROOT cluster creates the VFS root
1157	if( (core_lid == 0) && (local_cxy == CONFIG_VFS_ROOT_CXY ) )
1158	{
1159	// Only FATFS is supported yet,
1160	// TODO other File System can be introduced below
1161	if( CONFIG_VFS_ROOT_IS_FATFS )
1162	{
1163	// 1. allocate memory and initialize FATFS context in VFS_ROOT cluster
1164	xptr_t fatfs_ctx_xp = fatfs_ctx_alloc( CONFIG_VFS_ROOT_CXY );
1165
1166	if( fatfs_ctx_xp == XPTR_NULL )
1167	{
1168	printk("\n[PANIC] in %s : cannot allocate FATFS context in cluster %x\n",
1169	__FUNCTION__ , CONFIG_VFS_ROOT_CXY );
1170	hal_core_sleep();
1171	}
1172
1173	// initialise FATFS context in VFS_ROOT cluster from IOC device (boot_record)
1174	error = fatfs_ctx_init( fatfs_ctx_xp );
1175
1176	if( error )
1177	{
1178	printk("\n[PANIC] in %s : cannot initialize FATFS context in cluster %x\n",
1179	__FUNCTION__ , CONFIG_VFS_ROOT_CXY );
1180	hal_core_sleep();
1181	}
1182
1183	#if( DEBUG_KERNEL_INIT & 1 )
1184	printk("\n[%s] initialized FATFS context in cluster %x\n",
1185	__FUNCTION__, CONFIG_VFS_ROOT_CXY );
1186	#endif
1187
1188	// get various informations from FATFS context
1189	fatfs_ctx_t * fatfs_ctx_ptr = GET_PTR( fatfs_ctx_xp );
1190
1191	uint32_t root_dir_cluster = hal_remote_l32( XPTR( CONFIG_VFS_ROOT_CXY,
1192	&fatfs_ctx_ptr->root_dir_cluster ) );
1193
1194	uint32_t bytes_per_sector = hal_remote_l32( XPTR( CONFIG_VFS_ROOT_CXY,
1195	&fatfs_ctx_ptr->bytes_per_sector ) );
1196
1197	uint32_t sectors_per_cluster = hal_remote_l32( XPTR( CONFIG_VFS_ROOT_CXY,
1198	&fatfs_ctx_ptr->sectors_per_cluster ) );
1199
1200	uint32_t cluster_size = bytes_per_sector * sectors_per_cluster;
1201
1202	uint32_t fat_sectors_count = hal_remote_l32( XPTR( CONFIG_VFS_ROOT_CXY,
1203	&fatfs_ctx_ptr->fat_sectors_count ) ) << 7;
1204
1205	uint32_t total_clusters = fat_sectors_count << 7;
1206
1207	// 2. create VFS root inode in VFS_ROOT cluster
1208	// TODO define attr, rights, uid, gid
1209	error = vfs_inode_create( CONFIG_VFS_ROOT_CXY, // target cluster
1210	FS_TYPE_FATFS, // fs_type
1211	0, // attr
1212	0, // rights
1213	0, // uid
1214	0, // gid
1215	&vfs_root_inode_xp ); // return
1216	if( error )
1217	{
1218	printk("\n[PANIC] in %s : cannot create VFS root inode in cluster %x\n",
1219	__FUNCTION__ , CONFIG_VFS_ROOT_CXY );
1220	hal_core_sleep();
1221	}
1222
1223	#if( DEBUG_KERNEL_INIT & 1 )
1224	vfs_inode_t * root_inode = GET_PTR( vfs_root_inode_xp );
1225	printk("\n[%s] created </> root inode %x in cluster %x / ctx %x\n",
1226	__FUNCTION__, root_inode, CONFIG_VFS_ROOT_CXY, root_inode->ctx );
1227	#endif
1228
1229	// update FATFS root inode "type" and "extend" fields
1230	vfs_inode_t * vfs_root_inode_ptr = GET_PTR( vfs_root_inode_xp );
1231
1232	hal_remote_s32( XPTR( CONFIG_VFS_ROOT_CXY , &vfs_root_inode_ptr->type ),
1233	FILE_TYPE_DIR );
1234
1235	hal_remote_spt( XPTR( CONFIG_VFS_ROOT_CXY , &vfs_root_inode_ptr->extend ),
1236	(void*)(intptr_t)root_dir_cluster );
1237
1238	// 3. initialize the VFS context for FATFS in VFS_ROOT cluster
1239	vfs_ctx_init( CONFIG_VFS_ROOT_CXY, // target cluster
1240	FS_TYPE_FATFS, // fs type
1241	total_clusters, // number of clusters
1242	cluster_size, // bytes
1243	vfs_root_inode_xp, // VFS root
1244	fatfs_ctx_ptr ); // extend
1245
1246	#if( DEBUG_KERNEL_INIT & 1 )
1247	vfs_ctx_t * vfs_for_fatfs_ctx = &fs_context[FS_TYPE_FATFS];
1248	printk("\n[%s] initialized VFS_for_FATFS context in cluster %x / ctx %x / fs_type %d\n",
1249	__FUNCTION__, CONFIG_VFS_ROOT_CXY, vfs_for_fatfs_ctx, vfs_for_fatfs_ctx->type );
1250	#endif
1251	}
1252	else
1253	{
1254	printk("\n[PANIC] in %s : unsupported VFS type in cluster %x\n",
1255	__FUNCTION__ , CONFIG_VFS_ROOT_CXY );
1256	hal_core_sleep();
1257	}
1258
1259	// 4. create the <.> and <..> dentries in VFS root directory
1260	// the VFS root parent inode is the VFS root inode itself
1261	vfs_add_special_dentries( vfs_root_inode_xp,
1262	vfs_root_inode_xp );
1263
1264	// 5. register VFS root inode in target cluster process_zero descriptor
1265	hal_remote_s64( XPTR( CONFIG_VFS_ROOT_CXY , &process_zero.vfs_root_xp ),
1266	vfs_root_inode_xp );
1267	hal_remote_s64( XPTR( CONFIG_VFS_ROOT_CXY , &process_zero.cwd_xp ),
1268	vfs_root_inode_xp );
1269
1270	// 6. allocate memory for DEVFS context in VFS_ROOT cluster
1271	xptr_t devfs_ctx_xp = devfs_ctx_alloc( CONFIG_VFS_ROOT_CXY );
1272
1273	if( devfs_ctx_xp == XPTR_NULL )
1274	{
1275	printk("\n[PANIC] in %s : cannot create DEVFS context in cluster %x\n",
1276	__FUNCTION__ , CONFIG_VFS_ROOT_CXY );
1277	hal_core_sleep();
1278	}
1279
1280	// 7. initialize the VFS context for DEVFS in VFS_ROOT cluster
1281	vfs_ctx_init( CONFIG_VFS_ROOT_CXY, // target cluster
1282	FS_TYPE_DEVFS, // fs type
1283	0, // total_clusters: unused
1284	0, // cluster_size: unused
1285	vfs_root_inode_xp, // VFS root
1286	GET_PTR( devfs_ctx_xp ) ); // extend
1287
1288	#if( DEBUG_KERNEL_INIT & 1 )
1289	vfs_ctx_t * vfs_for_devfs_ctx = &fs_context[FS_TYPE_DEVFS];
1290	printk("\n[%s] initialized VFS_for_DEVFS context in cluster %x / ctx %x / fs_type %d\n",
1291	__FUNCTION__, CONFIG_VFS_ROOT_CXY, vfs_for_devfs_ctx, vfs_for_devfs_ctx->type );
1292	#endif
1293
1294	// 8. create "dev" and "external" inodes (directories)
1295	devfs_global_init( vfs_root_inode_xp,
1296	&devfs_dev_inode_xp,
1297	&devfs_external_inode_xp );
1298
1299	// 9. initializes DEVFS context in VFS_ROOT cluster
1300	devfs_ctx_init( devfs_ctx_xp,
1301	devfs_dev_inode_xp,
1302	devfs_external_inode_xp );
1303	}
1304
1305	/////////////////////////////////////////////////////////////////////////////////
1306	if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ),
1307	(info->x_size * info->y_size) );
1308	barrier_wait( &local_barrier , info->cores_nr );
1309	/////////////////////////////////////////////////////////////////////////////////
1310
1311	#if DEBUG_KERNEL_INIT
1312	if( (core_lid == 0) & (local_cxy == CONFIG_VFS_ROOT_CXY) )
1313	printk("\n[%s] exit barrier 6 : VFS root inode (%x) created in cluster (%x) / cycle %d\n",
1314	__FUNCTION__, GET_CXY(vfs_root_inode_xp),
1315	GET_PTR(vfs_root_inode_xp), (uint32_t)hal_get_cycles() );
1316	#endif
1317
1318	/////////////////////////////////////////////////////////////////////////////////
1319	// STEP 7 : In all clusters other than the VFS_ROOT cluster, the core[0] makes
1320	// the following local actions to complete the VFS initialisation :
1321	// 1. allocate a local context for the selected FS extension,
1322	// 2. copy FS context from VFS_ROOT cluster to local cluster,
1323	// 3. copy VFS_for_FATFS context from VFS_ROOT cluster to local cluster,
1324	// 4. allocate a local context for the DEVFS extension,
1325	// 5. copy DEVFS context from VFS_ROOT cluster to local cluster,
1326	// 6. update the local "root_inode_xp" field in process_zero.
1327	/////////////////////////////////////////////////////////////////////////////////
1328
1329	if( (core_lid == 0) && (local_cxy != CONFIG_VFS_ROOT_CXY) )
1330	{
1331	// only FATFS is supported yet
1332	// TODO other File System can be introduced below
1333	if( CONFIG_VFS_ROOT_IS_FATFS )
1334	{
1335	// 1. allocate a local FATFS context extension
1336	xptr_t local_fatfs_ctx_xp = fatfs_ctx_alloc( local_cxy );
1337
1338	if( local_fatfs_ctx_xp == XPTR_NULL )
1339	{
1340	printk("\n[PANIC] in %s : cannot create FATFS context in cluster %x\n",
1341	__FUNCTION__ , local_cxy );
1342	hal_core_sleep();
1343	}
1344
1345	// get local pointer on VFS_for_FATFS context (same in all clusters)
1346	vfs_ctx_t * vfs_fat_ctx_ptr = &fs_context[FS_TYPE_FATFS];
1347
1348	// build extended pointer on VFS_for_FATFS "extend" field in VFS_ROOT cluster
1349	xptr_t fatfs_extend_xp = XPTR( CONFIG_VFS_ROOT_CXY , &vfs_fat_ctx_ptr->extend );
1350
1351	// get local pointer on FATFS context in VFS_ROOT cluster
1352	fatfs_ctx_t * remote_fatfs_ctx_ptr = hal_remote_lpt( fatfs_extend_xp );
1353
1354	// build extended pointer on FATFS context in VFS_ROOT cluster
1355	xptr_t remote_fatfs_ctx_xp = XPTR( CONFIG_VFS_ROOT_CXY , remote_fatfs_ctx_ptr );
1356
1357	// 2. copy FATFS context from VFS_ROOT cluster to local cluster
1358	hal_remote_memcpy( local_fatfs_ctx_xp,
1359	remote_fatfs_ctx_xp,
1360	sizeof(fatfs_ctx_t) );
1361
1362	// build extended pointer on remote VFS_for_FATFS context
1363	xptr_t remote_vfs_ctx_xp = XPTR( CONFIG_VFS_ROOT_CXY , vfs_fat_ctx_ptr );
1364
1365	// build extended pointer on local VFS_for_FATFS context
1366	xptr_t local_vfs_ctx_xp = XPTR( local_cxy , vfs_fat_ctx_ptr );
1367
1368	// 3. copy VFS_for_FATFS context from VFS_ROOT cluster to local cluster
1369	hal_remote_memcpy( local_vfs_ctx_xp,
1370	remote_vfs_ctx_xp,
1371	sizeof(vfs_ctx_t) );
1372
1373	// update "extend" field in local VFS_for_FATFS context
1374	vfs_fat_ctx_ptr->extend = GET_PTR( local_fatfs_ctx_xp );
1375
1376	// check local FATFS and VFS context copies
1377	assert( __FUNCTION__, (((fatfs_ctx_t *)vfs_fat_ctx_ptr->extend)->sectors_per_cluster == 8),
1378	"illegal FATFS context" );
1379
1380	}
1381	else
1382	{
1383	printk("\n[PANIC] in %s : unsupported VFS type in cluster %x\n",
1384	__FUNCTION__ , local_cxy );
1385	hal_core_sleep();
1386	}
1387
1388	// 4. allocate a local DEVFS context extension,
1389	xptr_t local_devfs_ctx_xp = devfs_ctx_alloc( local_cxy );
1390
1391	// get local pointer on VFS_for_DEVFS context (same in all clusters)
1392	vfs_ctx_t * vfs_dev_ctx_ptr = &fs_context[FS_TYPE_DEVFS];
1393
1394	// build extended pointer on VFS_for_DEVFS extend field in VFS_ROOT cluster
1395	xptr_t remote_extend_xp = XPTR( CONFIG_VFS_ROOT_CXY , &vfs_dev_ctx_ptr->extend );
1396
1397	// get local pointer on DEVFS context in VFS_ROOT cluster
1398	devfs_ctx_t * remote_devfs_ctx_ptr = hal_remote_lpt( remote_extend_xp );
1399
1400	// build extended pointer on FATFS context in VFS_ROOT cluster
1401	xptr_t remote_devfs_ctx_xp = XPTR( CONFIG_VFS_ROOT_CXY , remote_devfs_ctx_ptr );
1402
1403	// 5. copy DEVFS context from VFS_ROOT cluster to local cluster
1404	hal_remote_memcpy( local_devfs_ctx_xp,
1405	remote_devfs_ctx_xp,
1406	sizeof(devfs_ctx_t) );
1407
1408	// update "extend" field in local VFS_for_DEVFS context
1409	vfs_dev_ctx_ptr->extend = GET_PTR( local_devfs_ctx_xp );
1410
1411	// get extended pointer on VFS root inode from VFS_ROOT cluster
1412	vfs_root_inode_xp = hal_remote_l64( XPTR( CONFIG_VFS_ROOT_CXY,
1413	&process_zero.vfs_root_xp ) );
1414
1415	// 6. update local process_zero descriptor
1416	process_zero.vfs_root_xp = vfs_root_inode_xp;
1417	process_zero.cwd_xp = vfs_root_inode_xp;
1418	}
1419
1420	/////////////////////////////////////////////////////////////////////////////////
1421	if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ),
1422	(info->x_size * info->y_size) );
1423	barrier_wait( &local_barrier , info->cores_nr );
1424	/////////////////////////////////////////////////////////////////////////////////
1425
1426	#if DEBUG_KERNEL_INIT
1427	if( (core_lid == 0) & (local_cxy == 0) )
1428	printk("\n[%s] exit barrier 7 : VFS & DEVFS contexts replicated in all clusters / cycle %d\n",
1429	__FUNCTION__ , (uint32_t)hal_get_cycles() );
1430	#endif
1431
1432	/////////////////////////////////////////////////////////////////////////////////
1433	// STEP 8 : In all clusters in parallel, core[0] completes DEVFS initialization.
1434	// Each core[0] creates the local DEVFS "internal" directory,
1435	// and creates the pseudo-files for chdevs placed in local cluster.
1436	/////////////////////////////////////////////////////////////////////////////////
1437
1438	if( core_lid == 0 )
1439	{
1440	// get local pointer on local DEVFS context
1441	devfs_ctx_t * ctx = fs_context[FS_TYPE_DEVFS].extend;
1442
1443	// populate DEVFS in all clusters
1444	devfs_local_init( ctx->dev_inode_xp,
1445	ctx->external_inode_xp );
1446	}
1447
1448	/////////////////////////////////////////////////////////////////////////////////
1449	if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ),
1450	(info->x_size * info->y_size) );
1451	barrier_wait( &local_barrier , info->cores_nr );
1452	/////////////////////////////////////////////////////////////////////////////////
1453
1454	#if DEBUG_KERNEL_INIT
1455	if( (core_lid == 0) & (local_cxy == 0) )
1456	printk("\n[%s] exit barrier 8 : DEVFS initialized in all clusters / cycle %d\n",
1457	__FUNCTION__, (uint32_t)hal_get_cycles() );
1458	#endif
1459
1460	#if( DEBUG_KERNEL_INIT & 1 )
1461	if( (core_lid == 0) & (local_cxy == 0) )
1462	vfs_display( vfs_root_inode_xp );
1463	#endif
1464
1465	/////////////////////////////////////////////////////////////////////////////////
1466	// STEP 9 : core[0] in cluster 0 creates the first user process (process_init).
1467	// This include the process VMM (GPT and VSL) creation.
1468	// Finally, it prints the ALMOS-MKH banner.
1469	/////////////////////////////////////////////////////////////////////////////////
1470
1471	if( (core_lid == 0) && (local_cxy == 0) )
1472	{
1473	process_init_create();
1474	}
1475
1476	#if DEBUG_KERNEL_INIT
1477	if( (core_lid == 0) & (local_cxy == 0) )
1478	printk("\n[%s] exit barrier 9 : process_init created in cluster 0 / cycle %d\n",
1479	__FUNCTION__, (uint32_t)hal_get_cycles() );
1480	#endif
1481
1482	if( (core_lid == 0) && (local_cxy == 0) )
1483	{
1484	print_banner( (info->x_size * info->y_size) , info->cores_nr );
1485	}
1486
1487	#if CONFIG_INSTRUMENTATION_FOOTPRINT
1488	if( (core_lid == 0) & (local_cxy == 0) )
1489	printk("\n\n***** memory fooprint for main kernel objects\n\n"
1490	" - thread descriptor : %d bytes\n"
1491	" - process descriptor : %d bytes\n"
1492	" - cluster manager : %d bytes\n"
1493	" - chdev descriptor : %d bytes\n"
1494	" - core descriptor : %d bytes\n"
1495	" - scheduler : %d bytes\n"
1496	" - socket descriptor : %d bytes\n"
1497	" - rpc fifo : %d bytes\n"
1498	" - page descriptor : %d bytes\n"
1499	" - mapper descriptor : %d bytes\n"
1500	" - vseg descriptor : %d bytes\n"
1501	" - ppm manager : %d bytes\n"
1502	" - kcm manager : %d bytes\n"
1503	" - vmm manager : %d bytes\n"
1504	" - vfs inode : %d bytes\n"
1505	" - vfs dentry : %d bytes\n"
1506	" - vfs file : %d bytes\n"
1507	" - vfs context : %d bytes\n"
1508	" - xhtab root : %d bytes\n"
1509	" - list item : %d bytes\n"
1510	" - xlist item : %d bytes\n"
1511	" - busylock : %d bytes\n"
1512	" - remote busylock : %d bytes\n"
1513	" - queuelock : %d bytes\n"
1514	" - remote queuelock : %d bytes\n"
1515	" - rwlock : %d bytes\n"
1516	" - remote rwlock : %d bytes\n",
1517	sizeof( thread_t ),
1518	sizeof( process_t ),
1519	sizeof( cluster_t ),
1520	sizeof( chdev_t ),
1521	sizeof( core_t ),
1522	sizeof( scheduler_t ),
1523	sizeof( socket_t ),
1524	sizeof( remote_fifo_t ),
1525	sizeof( page_t ),
1526	sizeof( mapper_t ),
1527	sizeof( vseg_t ),
1528	sizeof( ppm_t ),
1529	sizeof( kcm_t ),
1530	sizeof( vmm_t ),
1531	sizeof( vfs_inode_t ),
1532	sizeof( vfs_dentry_t ),
1533	sizeof( vfs_file_t ),
1534	sizeof( vfs_ctx_t ),
1535	sizeof( xhtab_t ),
1536	sizeof( list_entry_t ),
1537	sizeof( xlist_entry_t ),
1538	sizeof( busylock_t ),
1539	sizeof( remote_busylock_t ),
1540	sizeof( queuelock_t ),
1541	sizeof( remote_queuelock_t ),
1542	sizeof( rwlock_t ),
1543	sizeof( remote_rwlock_t ));
1544	#endif
1545
1546	// number of cycles per TICK (depends on the actual system clock frequency
1547	uint32_t cycles_per_tick = cluster->sys_clk / CONFIG_SCHED_TICKS_PER_SECOND;
1548
1549	// each core activates its private TICK IRQ
1550	dev_pic_enable_timer( cycles_per_tick );
1551
1552	/////////////////////////////////////////////////////////////////////////////////
1553	if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ),
1554	(info->x_size * info->y_size) );
1555	barrier_wait( &local_barrier , info->cores_nr );
1556	/////////////////////////////////////////////////////////////////////////////////
1557
1558	#if DEBUG_KERNEL_INIT
1559	thread_t * this = CURRENT_THREAD;
1560	printk("\n[%s] : thread[%x,%x] on core[%x,%d] jumps to thread_idle_func() / cycle %d\n",
1561	__FUNCTION__ , this->process->pid, this->trdid,
1562	local_cxy, core_lid, (uint32_t)hal_get_cycles() );
1563	#endif
1564
1565	// each core jump to thread_idle_func
1566	thread_idle_func();
1567
1568	} // end kernel_init()
1569

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: trunk/kernel/kern/kernel_init.c @ 683

Download in other formats: