Context Navigation

source: trunk/kernel/kern/rpc.c @ 636

Last change on this file since 636 was 635, checked in by alain, 5 years ago

This version is a major evolution: The physical memory allocators,
defined in the kmem.c, ppm.c, and kcm.c files have been modified
to support remote accesses. The RPCs that were previously user
to allocate physical memory in a remote cluster have been removed.
This has been done to cure a dead-lock in case of concurrent page-faults.

This version 2.2 has been tested on a (4 clusters / 2 cores per cluster)
TSAR architecture, for both the "sort" and the "fft" applications.

File size: 102.5 KB

Line
1	/*
2	* rpc.c - RPC operations implementation.
3	*
4	* Author Alain Greiner (2016,2017,2018,2019)
5	*
6	* Copyright (c) UPMC Sorbonne Universites
7	*
8	* This file is part of ALMOS-MKH.
9	*
10	* ALMOS-MKH is free software; you can redistribute it and/or modify it
11	* under the terms of the GNU General Public License as published by
12	* the Free Software Foundation; version 2.0 of the License.
13	*
14	* ALMOS-MKH is distributed in the hope that it will be useful, but
15	* WITHOUT ANY WARRANTY; without even the implied warranty of
16	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
17	* General Public License for more details.
18	*
19	* You should have received a copy of the GNU General Public License
20	* along with ALMOS-MKH; if not, write to the Free Software Foundation,
21	* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22	*/
23
24	#include <kernel_config.h>
25	#include <hal_kernel_types.h>
26	#include <hal_vmm.h>
27	#include <hal_atomic.h>
28	#include <hal_remote.h>
29	#include <hal_irqmask.h>
30	#include <hal_special.h>
31	#include <printk.h>
32	#include <user_dir.h>
33	#include <remote_sem.h>
34	#include <core.h>
35	#include <mapper.h>
36	#include <chdev.h>
37	#include <bits.h>
38	#include <thread.h>
39	#include <cluster.h>
40	#include <process.h>
41	#include <vfs.h>
42	#include <fatfs.h>
43	#include <rpc.h>
44
45
46	/////////////////////////////////////////////////////////////////////////////////////////
47	// Array of function pointers and array of printable strings.
48	// These arrays must be kept consistent with enum in rpc.h file.
49	/////////////////////////////////////////////////////////////////////////////////////////
50
51	rpc_server_t * rpc_server[RPC_MAX_INDEX] =
52	{
53	&rpc_undefined, // 0
54	&rpc_undefined, // 1
55	&rpc_undefined, // 2
56	&rpc_process_make_fork_server, // 3
57	&rpc_user_dir_create_server, // 4
58	&rpc_user_dir_destroy_server, // 5
59	&rpc_thread_user_create_server, // 6
60	&rpc_thread_kernel_create_server, // 7
61	&rpc_vfs_fs_update_dentry_server, // 8
62	&rpc_process_sigaction_server, // 9
63
64	&rpc_vfs_inode_create_server, // 10
65	&rpc_vfs_inode_destroy_server, // 11
66	&rpc_vfs_dentry_create_server, // 12
67	&rpc_vfs_dentry_destroy_server, // 13
68	&rpc_vfs_file_create_server, // 14
69	&rpc_vfs_file_destroy_server, // 15
70	&rpc_vfs_fs_new_dentry_server, // 16
71	&rpc_vfs_fs_add_dentry_server, // 17
72	&rpc_vfs_fs_remove_dentry_server, // 18
73	&rpc_vfs_inode_load_all_pages_server, // 19
74
75	&rpc_vmm_get_vseg_server, // 20
76	&rpc_vmm_global_update_pte_server, // 21
77	&rpc_undefined, // 22
78	&rpc_undefined, // 23
79	&rpc_mapper_sync_server, // 24
80	&rpc_undefined, // 25
81	&rpc_vmm_delete_vseg_server, // 26
82	&rpc_vmm_create_vseg_server, // 27
83	&rpc_vmm_set_cow_server, // 28
84	&rpc_undefined, // 29
85	};
86
87	char * rpc_str[RPC_MAX_INDEX] =
88	{
89	"undefined_0", // 0
90	"undefined_1", // 1
91	"undefined_2", // 2
92	"PROCESS_MAKE_FORK", // 3
93	"USER_DIR_CREATE", // 4
94	"USER_DIR_DESTROY", // 5
95	"THREAD_USER_CREATE", // 6
96	"THREAD_KERNEL_CREATE", // 7
97	"VFS_FS_UPDATE_DENTRY", // 8
98	"PROCESS_SIGACTION", // 9
99
100	"VFS_INODE_CREATE", // 10
101	"VFS_INODE_DESTROY", // 11
102	"VFS_DENTRY_CREATE", // 12
103	"VFS_DENTRY_DESTROY", // 13
104	"VFS_FILE_CREATE", // 14
105	"VFS_FILE_DESTROY", // 15
106	"VFS_FS_NEW_DENTRY", // 16
107	"VFS_FS_ADD_DENTRY", // 17
108	"VFS_FS_REMOVE_DENTRY", // 18
109	"VFS_INODE_LOAD_ALL_PAGES", // 19
110
111	"GET_VSEG", // 20
112	"GLOBAL_UPDATE_PTE", // 21
113	"undefined_22", // 22
114	"undefined_23", // 23
115	"MAPPER_SYNC", // 24
116	"undefined_25", // 25
117	"VMM_DELETE_VSEG", // 26
118	"VMM_CREATE_VSEG", // 27
119	"VMM_SET_COW", // 28
120	"undefined_29", // 29
121	};
122
123	//////////////////////////////////////////////////////////////////////////////////
124	void __attribute__((noinline)) rpc_undefined( xptr_t xp __attribute__ ((unused)) )
125	{
126	assert( false , "called in cluster %x", local_cxy );
127	}
128
129	/***************************************************************************************/
130	/********** Generic function supporting RPCs : client side *************************/
131	/***************************************************************************************/
132
133	///////////////////////////////////////
134	void rpc_send( cxy_t server_cxy,
135	rpc_desc_t * rpc )
136	{
137	lid_t server_core_lid;
138	lid_t client_core_lid;
139	volatile error_t full;
140	thread_t * this;
141
142	full = 0;
143	this = CURRENT_THREAD;
144	client_core_lid = this->core->lid;
145
146	// check calling thread can yield when is not the IDLE thread
147	// RPCs executed by the IDLE thread during kernel_init do not deschedule
148	if( this->type != THREAD_IDLE ) thread_assert_can_yield( this , __FUNCTION__ );
149
150	// select a server_core : use client core index if possible / core 0 otherwise
151	if( client_core_lid < hal_remote_l32( XPTR( server_cxy , &LOCAL_CLUSTER->cores_nr ) ) )
152	{
153	server_core_lid = client_core_lid;
154	}
155	else
156	{
157	server_core_lid = 0;
158	}
159
160	// register client_thread and client_core in RPC descriptor
161	rpc->thread = this;
162	rpc->lid = client_core_lid;
163
164	// build extended pointer on the RPC descriptor
165	xptr_t desc_xp = XPTR( local_cxy , rpc );
166
167	// get local pointer on rpc_fifo in remote cluster,
168	remote_fifo_t * rpc_fifo = &LOCAL_CLUSTER->rpc_fifo[server_core_lid];
169	xptr_t rpc_fifo_xp = XPTR( server_cxy , rpc_fifo );
170
171	// post RPC in remote fifo / deschedule without blocking if fifo full
172	do
173	{
174	full = remote_fifo_put_item( rpc_fifo_xp , (uint64_t )desc_xp );
175
176	if ( full )
177	{
178	printk("\n[WARNING] %s : cluster %x cannot post RPC to cluster %x\n",
179	__FUNCTION__ , local_cxy , server_cxy );
180
181	// deschedule without blocking
182	sched_yield("RPC fifo full");
183	}
184	}
185	while( full );
186
187	#if DEBUG_RPC_CLIENT_GENERIC
188	uint32_t cycle = (uint32_t)hal_get_cycles();
189	uint32_t items = remote_fifo_items( rpc_fifo_xp );
190	if( DEBUG_RPC_CLIENT_GENERIC < cycle )
191	printk("\n[%s] thread[%x,%x] / rpc %s / server[%x,%d] / items %d / cycle %d\n",
192	__FUNCTION__, this->process->pid, this->trdid, rpc_str[rpc->index],
193	server_cxy, server_core_lid, items, cycle );
194	#endif
195
196	// send IPI to the selected server core
197	dev_pic_send_ipi( server_cxy , server_core_lid );
198
199	// wait RPC completion before returning if blocking RPC :
200	// - deschedule without blocking if thread idle (in kernel init)
201	// - block and deschedule policy for any other thread
202	if ( rpc->blocking )
203	{
204	if( this->type == THREAD_IDLE ) // deschedule without blocking policy
205	{
206
207	#if DEBUG_RPC_CLIENT_GENERIC
208	cycle = (uint32_t)hal_get_cycles();
209	if( DEBUG_RPC_CLIENT_GENERIC < cycle )
210	printk("\n[%s] thread[%x,%x] enter waiting loop for rpc %s / cycle %d\n",
211	__FUNCTION__, this->process->pid, this->trdid, rpc_str[rpc->index], cycle );
212	#endif
213	while( 1 )
214	{
215	// check responses counter
216	if( hal_remote_l32( XPTR( local_cxy , rpc->rsp ) ) == 0 ) break;
217
218	// deschedule
219	sched_yield("busy_waiting RPC completion");
220	}
221
222	#if DEBUG_RPC_CLIENT_GENERIC
223	cycle = (uint32_t)hal_get_cycles();
224	if( DEBUG_RPC_CLIENT_GENERIC < cycle )
225	printk("\n[%s] thread[%x,%x] received response for rpc %s / cycle %d\n",
226	__FUNCTION__, this->process->pid, this->trdid, rpc_str[rpc->index], cycle );
227	#endif
228
229	}
230	else // block and deschedule policy
231	{
232
233	#if DEBUG_RPC_CLIENT_GENERIC
234	cycle = (uint32_t)hal_get_cycles();
235	if( DEBUG_RPC_CLIENT_GENERIC < cycle )
236	printk("\n[%s] thread[%x,%x] blocks & deschedules for rpc %s / cycle %d\n",
237	__FUNCTION__, this->process->pid, this->trdid, rpc_str[rpc->index], cycle );
238	#endif
239
240	// block client thread
241	thread_block( XPTR( local_cxy , this ) , THREAD_BLOCKED_RPC );
242
243	// deschedule
244	sched_yield("blocked on RPC");
245
246	#if DEBUG_RPC_CLIENT_GENERIC
247	cycle = (uint32_t)hal_get_cycles();
248	if( DEBUG_RPC_CLIENT_GENERIC < cycle )
249	printk("\n[%s] thread[%x,%x] resumes after rpc %s / cycle %d\n",
250	__FUNCTION__, this->process->pid, this->trdid, rpc_str[rpc->index], cycle );
251	#endif
252	}
253
254	// response must be available for a blocking RPC
255	assert( (*rpc->rsp == 0) , "illegal response for RPC %s\n", rpc_str[rpc->index] );
256
257	}
258	else // non blocking RPC
259	{
260
261	#if DEBUG_RPC_CLIENT_GENERIC
262	cycle = (uint32_t)hal_get_cycles();
263	if( DEBUG_RPC_CLIENT_GENERIC < cycle )
264	printk("\n[%s] thread[%x,%x] returns for non blocking rpc %s / cycle %d\n",
265	__FUNCTION__, this->process->pid, this->trdid, rpc_str[rpc->index], cycle );
266	#endif
267
268	}
269	} // end rpc_send()
270
271
272	/***************************************************************************************/
273	/********** Generic functions supporting RPCs : server side ************************/
274	/***************************************************************************************/
275
276	////////////////////////////
277	void rpc_server_func( void )
278	{
279	error_t empty; // local RPC fifo state
280	xptr_t desc_xp; // extended pointer on RPC request
281	cxy_t desc_cxy; // RPC request cluster (client)
282	rpc_desc_t * desc_ptr; // RPC request local pointer
283	uint32_t index; // RPC request index
284	thread_t * client_ptr; // local pointer on client thread
285	xptr_t client_xp; // extended pointer on client thread
286	lid_t client_lid; // local index of client core
287	thread_t * server_ptr; // local pointer on server thread
288	xptr_t server_xp; // extended pointer on server thread
289	lid_t server_lid; // local index of server core
290	remote_fifo_t * rpc_fifo; // local pointer on RPC fifo
291	uint32_t * rsp_ptr; // local pointer on responses counter
292	xptr_t rsp_xp; // extended pointer on responses counter
293	uint32_t responses; // number of expected responses
294
295	// makes RPC thread not preemptable
296	hal_disable_irq( NULL );
297
298	server_ptr = CURRENT_THREAD;
299	server_xp = XPTR( local_cxy , server_ptr );
300	server_lid = server_ptr->core->lid;
301	rpc_fifo = &LOCAL_CLUSTER->rpc_fifo[server_lid];
302
303	// "infinite" RPC thread loop
304	while(1)
305	{
306	// try to take RPC_FIFO ownership
307	if( hal_atomic_test_set( &rpc_fifo->owner , server_ptr->trdid ) )
308	{
309
310	#if DEBUG_RPC_SERVER_GENERIC
311	uint32_t cycle = (uint32_t)hal_get_cycles();
312	if( DEBUG_RPC_SERVER_GENERIC < cycle )
313	printk("\n[%s] RPC thread[%x,%x] on core[%d] takes RPC_FIFO ownership / cycle %d\n",
314	__FUNCTION__, server_ptr->process->pid, server_ptr->trdid, server_lid, cycle );
315	#endif
316	// try to consume one RPC request
317	empty = remote_fifo_get_item( rpc_fifo , (uint64_t *)&desc_xp );
318
319	// release RPC_FIFO ownership
320	rpc_fifo->owner = 0;
321
322	// handle RPC request if success
323	if ( empty == 0 )
324	{
325	// get client cluster and pointer on RPC descriptor
326	desc_cxy = GET_CXY( desc_xp );
327	desc_ptr = GET_PTR( desc_xp );
328
329	// get relevant infos from RPC descriptor
330	index = hal_remote_l32( XPTR( desc_cxy , &desc_ptr->index ) );
331	client_ptr = hal_remote_lpt( XPTR( desc_cxy , &desc_ptr->thread ) );
332	rsp_ptr = hal_remote_lpt( XPTR( desc_cxy , &desc_ptr->rsp ) );
333	client_lid = hal_remote_l32( XPTR( desc_cxy , &desc_ptr->lid ) );
334
335	rsp_xp = XPTR( desc_cxy , rsp_ptr );
336	client_xp = XPTR( desc_cxy , client_ptr );
337
338	#if DEBUG_RPC_SERVER_GENERIC
339	cycle = (uint32_t)hal_get_cycles();
340	uint32_t items = remote_fifo_items( XPTR( local_cxy , rpc_fifo ) );
341	if( DEBUG_RPC_SERVER_GENERIC < cycle )
342	printk("\n[%s] RPC thread[%x,%x] got rpc %s / client_cxy %x / items %d / cycle %d\n",
343	__FUNCTION__, server_ptr->process->pid, server_ptr->trdid, rpc_str[index], desc_cxy, items, cycle );
344	#endif
345	// register client thread in RPC thread descriptor
346	server_ptr->rpc_client_xp = client_xp;
347
348	// call the relevant server function
349	rpc_server[index]( desc_xp );
350
351	#if DEBUG_RPC_SERVER_GENERIC
352	cycle = (uint32_t)hal_get_cycles();
353	if( DEBUG_RPC_SERVER_GENERIC < cycle )
354	printk("\n[%s] RPC thread[%x,%x] completes rpc %s / client_cxy %x / cycle %d\n",
355	__FUNCTION__, server_ptr->process->pid, server_ptr->trdid, rpc_str[index], desc_cxy, cycle );
356	#endif
357	// decrement expected responses counter
358	responses = hal_remote_atomic_add( rsp_xp , -1 );
359
360	// unblock client thread if last response
361	if( responses == 1 )
362	{
363	// unblock client thread
364	thread_unblock( client_xp , THREAD_BLOCKED_RPC );
365
366	hal_fence();
367
368	#if DEBUG_RPC_SERVER_GENERIC
369	cycle = (uint32_t)hal_get_cycles();
370	trdid_t client_trdid = hal_remote_l32( XPTR( desc_cxy , &client_ptr->trdid ) );
371	process_t * process = hal_remote_lpt( XPTR( desc_cxy , &client_ptr->process ) );
372	pid_t client_pid = hal_remote_l32( XPTR( desc_cxy , &process->pid ) );
373	if( DEBUG_RPC_SERVER_GENERIC < cycle )
374	printk("\n[%s] RPC thread[%x,%x] unblocked client thread[%x,%x] / cycle %d\n",
375	__FUNCTION__, server_ptr->process->pid, server_ptr->trdid,
376	client_pid, client_trdid, cycle );
377	#endif
378	// send IPI to client core
379	dev_pic_send_ipi( desc_cxy , client_lid );
380	}
381	} // end RPC handling if fifo non empty
382	} // end if RPC_fIFO ownership successfully taken and released
383
384	// sucide if too many RPC threads
385	if( LOCAL_CLUSTER->rpc_threads[server_lid] >= CONFIG_RPC_THREADS_MAX )
386	{
387
388	#if DEBUG_RPC_SERVER_GENERIC
389	uint32_t cycle = (uint32_t)hal_get_cycles();
390	if( DEBUG_RPC_SERVER_GENERIC < cycle )
391	printk("\n[%s] RPC thread[%x,%x] suicides / cycle %d\n",
392	__FUNCTION__, server_ptr->process->pid, server_ptr->trdid, cycle );
393	#endif
394	// update RPC threads counter
395	hal_atomic_add( &LOCAL_CLUSTER->rpc_threads[server_lid] , -1 );
396
397	// RPC thread blocks on GLOBAL
398	thread_block( server_xp , THREAD_BLOCKED_GLOBAL );
399
400	// RPC thread set the REQ_DELETE flag to suicide
401	hal_remote_atomic_or( server_xp , THREAD_FLAG_REQ_DELETE );
402	}
403	// block and deschedule otherwise
404	else
405	{
406
407	#if DEBUG_RPC_SERVER_GENERIC
408	uint32_t cycle = (uint32_t)hal_get_cycles();
409	if( DEBUG_RPC_SERVER_GENERIC < cycle )
410	printk("\n[%s] RPC thread[%x,%x] blocks & deschedules / cycle %d\n",
411	__FUNCTION__, server_ptr->process->pid, server_ptr->trdid, cycle );
412	#endif
413	// RPC thread blocks on IDLE
414	thread_block( server_xp , THREAD_BLOCKED_IDLE );
415
416	// RPC thread deschedules
417	sched_yield("RPC_FIFO empty");
418	}
419	} // end infinite loop
420
421	} // end rpc_server_func()
422
423
424	/////////////////////////////////////////////////////////////////////////////////////////
425	// [0] RPC_PMEM_GET_PAGES deprecated [AG] May 2019
426	/////////////////////////////////////////////////////////////////////////////////////////
427
428	/*
429	///////////////////////////////////////////////
430	void rpc_pmem_get_pages_client( cxy_t cxy,
431	uint32_t order, // in
432	page_t ** page ) // out
433	{
434	#if DEBUG_RPC_PMEM_GET_PAGES
435	thread_t * this = CURRENT_THREAD;
436	uint32_t cycle = (uint32_t)hal_get_cycles();
437	if( cycle > DEBUG_RPC_PMEM_GET_PAGES )
438	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
439	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
440	#endif
441
442	uint32_t responses = 1;
443
444	// initialise RPC descriptor header
445	rpc_desc_t rpc;
446	rpc.index = RPC_PMEM_GET_PAGES;
447	rpc.blocking = true;
448	rpc.rsp = &responses;
449
450	// set input arguments in RPC descriptor
451	rpc.args[0] = (uint64_t)order;
452
453	// register RPC request in remote RPC fifo
454	rpc_send( cxy , &rpc );
455
456	// get output arguments from RPC descriptor
457	page = (page_t )(intptr_t)rpc.args[1];
458
459	#if DEBUG_RPC_PMEM_GET_PAGES
460	cycle = (uint32_t)hal_get_cycles();
461	if( cycle > DEBUG_RPC_PMEM_GET_PAGES )
462	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
463	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
464	#endif
465	}
466
467	///////////////////////////////////////////
468	void rpc_pmem_get_pages_server( xptr_t xp )
469	{
470	#if DEBUG_RPC_PMEM_GET_PAGES
471	thread_t * this = CURRENT_THREAD;
472	uint32_t cycle = (uint32_t)hal_get_cycles();
473	if( cycle > DEBUG_RPC_PMEM_GET_PAGES )
474	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
475	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
476	#endif
477
478	// get client cluster identifier and pointer on RPC descriptor
479	cxy_t cxy = GET_CXY( xp );
480	rpc_desc_t * desc = GET_PTR( xp );
481
482	// get input arguments from client RPC descriptor
483	uint32_t order = (uint32_t)hal_remote_l64( XPTR( cxy , &desc->args[0] ) );
484
485	// call local pmem allocator
486	page_t * page = ppm_alloc_pages( order );
487
488	// set output arguments into client RPC descriptor
489	hal_remote_s64( XPTR( cxy , &desc->args[1] ) , (uint64_t)(intptr_t)page );
490
491	#if DEBUG_RPC_PMEM_GET_PAGES
492	cycle = (uint32_t)hal_get_cycles();
493	if( cycle > DEBUG_RPC_PMEM_GET_PAGES )
494	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
495	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
496	#endif
497	}
498	*/
499
500	/////////////////////////////////////////////////////////////////////////////////////////
501	// [1] RPC_PMEM_RELEASE_PAGES deprecated [AG] may 2019
502	/////////////////////////////////////////////////////////////////////////////////////////
503
504	/*
505	//////////////////////////////////////////////////
506	void rpc_pmem_release_pages_client( cxy_t cxy,
507	page_t * page ) // out
508	{
509	#if DEBUG_RPC_PMEM_RELEASE_PAGES
510	thread_t * this = CURRENT_THREAD;
511	uint32_t cycle = (uint32_t)hal_get_cycles();
512	if( cycle > DEBUG_RPC_PMEM_RELEASE_PAGES )
513	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
514	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
515	#endif
516
517	uint32_t responses = 1;
518
519	// initialise RPC descriptor header
520	rpc_desc_t rpc;
521	rpc.index = RPC_PMEM_RELEASE_PAGES;
522	rpc.blocking = true;
523	rpc.rsp = &responses;
524
525	// set input arguments in RPC descriptor
526	rpc.args[0] = (uint64_t)(intptr_t)page;
527
528	// register RPC request in remote RPC fifo
529	rpc_send( cxy , &rpc );
530
531	#if DEBUG_RPC_PMEM_RELEASE_PAGES
532	cycle = (uint32_t)hal_get_cycles();
533	if( cycle > DEBUG_RPC_PMEM_RELEASE_PAGES )
534	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
535	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
536	#endif
537	}
538
539	///////////////////////////////////////////////
540	void rpc_pmem_release_pages_server( xptr_t xp )
541	{
542	#if DEBUG_RPC_PMEM_RELEASE_PAGES
543	thread_t * this = CURRENT_THREAD;
544	uint32_t cycle = (uint32_t)hal_get_cycles();
545	if( cycle > DEBUG_RPC_PMEM_RELEASE_PAGES )
546	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
547	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
548	#endif
549
550	// get client cluster identifier and pointer on RPC descriptor
551	cxy_t cxy = GET_CXY( xp );
552	rpc_desc_t * desc = GET_PTR( xp );
553
554	// get input arguments from client RPC descriptor
555	page_t * page = (page_t *)(intptr_t)hal_remote_l64( XPTR( cxy , &desc->args[0] ) );
556
557	// release memory to local pmem
558	kmem_req_t req;
559	req.type = KMEM_PPM;
560	req.ptr = page;
561	kmem_free( &req );
562
563	#if DEBUG_RPC_PMEM_RELEASE_PAGES
564	cycle = (uint32_t)hal_get_cycles();
565	if( cycle > DEBUG_RPC_PMEM_RELEASE_PAGES )
566	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
567	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
568	#endif
569	}
570	*/
571
572	/////////////////////////////////////////////////////////////////////////////////////////
573	// [2] RPC_PPM_DISPLAY deprecated [AG] May 2019
574	/////////////////////////////////////////////////////////////////////////////////////////
575
576	/*
577	/////////////////////////////////////////
578	void rpc_ppm_display_client( cxy_t cxy )
579	{
580	#if DEBUG_RPC_PPM_DISPLAY
581	thread_t * this = CURRENT_THREAD;
582	uint32_t cycle = (uint32_t)hal_get_cycles();
583	if( cycle > DEBUG_RPC_PPM_DISPLAY )
584	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
585	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
586	#endif
587
588	uint32_t responses = 1;
589
590	// initialise RPC descriptor header
591	rpc_desc_t rpc;
592	rpc.index = RPC_PPM_DISPLAY;
593	rpc.blocking = true;
594	rpc.rsp = &responses;
595
596	// register RPC request in remote RPC fifo
597	rpc_send( cxy , &rpc );
598
599	#if DEBUG_RPC_PPM_DISPLAY
600	cycle = (uint32_t)hal_get_cycles();
601	if( cycle > DEBUG_RPC_PPM_DISPLAY )
602	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
603	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
604	#endif
605	}
606
607	////////////////////////////////////////////////////////////////////
608	void rpc_ppm_display_server( xptr_t __attribute__((__unused__)) xp )
609	{
610	#if DEBUG_RPC_PPM_DISPLAY
611	thread_t * this = CURRENT_THREAD;
612	uint32_t cycle = (uint32_t)hal_get_cycles();
613	if( cycle > DEBUG_RPC_PPM_DISPLAY )
614	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
615	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
616	#endif
617
618	// call local kernel function
619	ppm_display();
620
621	#if DEBUG_RPC_PPM_DISPLAY
622	cycle = (uint32_t)hal_get_cycles();
623	if( cycle > DEBUG_RPC_PPM_DISPLAY )
624	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
625	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
626	#endif
627	}
628	*/
629
630	/////////////////////////////////////////////////////////////////////////////////////////
631	// [3] Marshaling functions attached to RPC_PROCESS_MAKE_FORK
632	/////////////////////////////////////////////////////////////////////////////////////////
633
634	///////////////////////////////////////////////////
635	void rpc_process_make_fork_client( cxy_t cxy,
636	xptr_t ref_process_xp, // in
637	xptr_t parent_thread_xp, // in
638	pid_t * child_pid, // out
639	thread_t ** child_thread_ptr, // out
640	error_t * error ) // out
641	{
642	#if DEBUG_RPC_PROCESS_MAKE_FORK
643	thread_t * this = CURRENT_THREAD;
644	uint32_t cycle = (uint32_t)hal_get_cycles();
645	if( cycle > DEBUG_RPC_PROCESS_MAKE_FORK )
646	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
647	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
648	#endif
649
650	uint32_t responses = 1;
651
652	// initialise RPC descriptor header
653	rpc_desc_t rpc;
654	rpc.index = RPC_PROCESS_MAKE_FORK;
655	rpc.blocking = true;
656	rpc.rsp = &responses;
657
658	// set input arguments in RPC descriptor
659	rpc.args[0] = (uint64_t)ref_process_xp;
660	rpc.args[1] = (uint64_t)parent_thread_xp;
661
662	// register RPC request in remote RPC fifo
663	rpc_send( cxy , &rpc );
664
665	// get output arguments from RPC descriptor
666	*child_pid = (pid_t)rpc.args[2];
667	child_thread_ptr = (thread_t )(intptr_t)rpc.args[3];
668	*error = (error_t)rpc.args[4];
669
670	#if DEBUG_RPC_PROCESS_MAKE_FORK
671	cycle = (uint32_t)hal_get_cycles();
672	if( cycle > DEBUG_RPC_PROCESS_MAKE_FORK )
673	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
674	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
675	#endif
676	}
677
678	//////////////////////////////////////////////
679	void rpc_process_make_fork_server( xptr_t xp )
680	{
681	#if DEBUG_RPC_PROCESS_MAKE_FORK
682	thread_t * this = CURRENT_THREAD;
683	uint32_t cycle = (uint32_t)hal_get_cycles();
684	if( cycle > DEBUG_RPC_PROCESS_MAKE_FORK )
685	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
686	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
687	#endif
688
689	xptr_t ref_process_xp; // extended pointer on reference parent process
690	xptr_t parent_thread_xp; // extended pointer on parent thread
691	pid_t child_pid; // child process identifier
692	thread_t * child_thread_ptr; // local copy of exec_info structure
693	error_t error; // local error status
694
695	// get client cluster identifier and pointer on RPC descriptor
696	cxy_t client_cxy = GET_CXY( xp );
697	rpc_desc_t * desc = GET_PTR( xp );
698
699	// get input arguments from cient RPC descriptor
700	ref_process_xp = (xptr_t)hal_remote_l64( XPTR( client_cxy , &desc->args[0] ) );
701	parent_thread_xp = (xptr_t)hal_remote_l64( XPTR( client_cxy , &desc->args[1] ) );
702
703	// call local kernel function
704	error = process_make_fork( ref_process_xp,
705	parent_thread_xp,
706	&child_pid,
707	&child_thread_ptr );
708
709	// set output argument into client RPC descriptor
710	hal_remote_s64( XPTR( client_cxy , &desc->args[2] ) , (uint64_t)child_pid );
711	hal_remote_s64( XPTR( client_cxy , &desc->args[3] ) , (uint64_t)(intptr_t)child_thread_ptr );
712	hal_remote_s64( XPTR( client_cxy , &desc->args[4] ) , (uint64_t)error );
713
714	#if DEBUG_RPC_PROCESS_MAKE_FORK
715	cycle = (uint32_t)hal_get_cycles();
716	if( cycle > DEBUG_RPC_PROCESS_MAKE_FORK )
717	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
718	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
719	#endif
720	}
721
722	/////////////////////////////////////////////////////////////////////////////////////////
723	// [4] Marshaling functions attached to RPC_USER_DIR_CREATE
724	/////////////////////////////////////////////////////////////////////////////////////////
725
726	////////////////////////////////////////////////////
727	void rpc_user_dir_create_client( cxy_t cxy,
728	vfs_inode_t * inode,
729	xptr_t ref_xp,
730	user_dir_t ** dir )
731	{
732	#if DEBUG_RPC_USER_DIR_CREATE
733	thread_t * this = CURRENT_THREAD;
734	uint32_t cycle = (uint32_t)hal_get_cycles();
735	if( cycle > DEBUG_RPC_USER_DIR_CREATE)
736	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
737	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
738	#endif
739
740	uint32_t responses = 1;
741
742	// initialise RPC descriptor header
743	rpc_desc_t rpc;
744	rpc.index = RPC_USER_DIR_CREATE;
745	rpc.blocking = true;
746	rpc.rsp = &responses;
747
748	// set input arguments in RPC descriptor
749	rpc.args[0] = (uint64_t)(intptr_t)inode;
750	rpc.args[1] = (uint64_t)ref_xp;
751
752	// register RPC request in remote RPC fifo
753	rpc_send( cxy , &rpc );
754
755	// get output argument from RPC descriptor
756	dir = (user_dir_t )(intptr_t)rpc.args[2];
757
758	#if DEBUG_RPC_USER_DIR_CREATE
759	cycle = (uint32_t)hal_get_cycles();
760	if( cycle > DEBUG_RPC_USER_DIR_CREATE)
761	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
762	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
763	#endif
764	}
765
766	////////////////////////////////////////////
767	void rpc_user_dir_create_server( xptr_t xp )
768	{
769	#if DEBUG_RPC_USER_DIR_CREATE
770	thread_t * this = CURRENT_THREAD;
771	uint32_t cycle = (uint32_t)hal_get_cycles();
772	if( cycle > DEBUG_RPC_USER_DIR_CREATE)
773	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
774	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
775	#endif
776
777	vfs_inode_t * inode; // pointer on inode in server cluster
778	xptr_t ref_xp; // extended pointer on reference user process
779	user_dir_t * dir; // pointer on user_dir structure in server cluster
780
781	// get client cluster identifier and pointer on RPC descriptor
782	cxy_t client_cxy = GET_CXY( xp );
783	rpc_desc_t * desc = GET_PTR( xp );
784
785	// get input argument from RPC descriptor
786	inode = (vfs_inode_t *)(intptr_t)hal_remote_l64(XPTR(client_cxy , &desc->args[0]));
787	ref_xp = (xptr_t) hal_remote_l64(XPTR(client_cxy , &desc->args[1]));
788
789	// call kernel function
790	dir = user_dir_create( inode , ref_xp );
791
792	// set output argument into RPC descriptor
793	hal_remote_s64( XPTR( client_cxy , &desc->args[2] ) , (intptr_t)dir );
794
795	#if DEBUG_RPC_USER_DIR_CREATE
796	cycle = (uint32_t)hal_get_cycles();
797	if( cycle > DEBUG_RPC_USER_DIR_CREATE)
798	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
799	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
800	#endif
801	}
802
803	/////////////////////////////////////////////////////////////////////////////////////////
804	// [5] Marshaling functions attached to RPC_USER_DIR_DESTROY
805	/////////////////////////////////////////////////////////////////////////////////////////
806
807	////////////////////////////////////////////////////
808	void rpc_user_dir_destroy_client( cxy_t cxy,
809	user_dir_t * dir,
810	xptr_t ref_xp )
811	{
812	#if DEBUG_RPC_USER_DIR_DESTROY
813	thread_t * this = CURRENT_THREAD;
814	uint32_t cycle = (uint32_t)hal_get_cycles();
815	if( cycle > DEBUG_RPC_USER_DIR_DESTROY)
816	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
817	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
818	#endif
819
820	uint32_t responses = 1;
821
822	// initialise RPC descriptor header
823	rpc_desc_t rpc;
824	rpc.index = RPC_USER_DIR_DESTROY;
825	rpc.blocking = true;
826	rpc.rsp = &responses;
827
828	// set input arguments in RPC descriptor
829	rpc.args[0] = (uint64_t)(intptr_t)dir;
830	rpc.args[1] = (uint64_t)ref_xp;
831
832	// register RPC request in remote RPC fifo
833	rpc_send( cxy , &rpc );
834
835	#if DEBUG_RPC_USER_DIR_DESTROY
836	cycle = (uint32_t)hal_get_cycles();
837	if( cycle > DEBUG_RPC_USER_DIR_DESTROY)
838	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
839	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
840	#endif
841	}
842
843	/////////////////////////////////////////////
844	void rpc_user_dir_destroy_server( xptr_t xp )
845	{
846	#if DEBUG_RPC_USER_DIR_DESTROY
847	thread_t * this = CURRENT_THREAD;
848	uint32_t cycle = (uint32_t)hal_get_cycles();
849	if( cycle > DEBUG_RPC_USER_DIR_DESTROY)
850	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
851	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
852	#endif
853
854	user_dir_t * dir; // pointer on user_dir structure in server cluster
855	xptr_t ref_xp; // extended pointer on reference process
856
857	// get client cluster identifier and pointer on RPC descriptor
858	cxy_t client_cxy = GET_CXY( xp );
859	rpc_desc_t * desc = GET_PTR( xp );
860
861	// get input argument from RPC descriptor
862	dir = (user_dir_t *)(intptr_t)hal_remote_l64(XPTR(client_cxy , &desc->args[0]));
863	ref_xp = (xptr_t) hal_remote_l64(XPTR(client_cxy , &desc->args[1]));
864
865	// call kernel function
866	user_dir_destroy( dir , ref_xp );
867
868	#if DEBUG_RPC_USER_DIR_DESTROY
869	cycle = (uint32_t)hal_get_cycles();
870	if( cycle > DEBUG_RPC_USER_DIR_DESTROY)
871	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
872	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
873	#endif
874	}
875
876	/////////////////////////////////////////////////////////////////////////////////////////
877	// [6] Marshaling functions attached to RPC_THREAD_USER_CREATE
878	/////////////////////////////////////////////////////////////////////////////////////////
879
880	/////////////////////////////////////////////////////////
881	void rpc_thread_user_create_client( cxy_t cxy,
882	pid_t pid, // in
883	void * start_func, // in
884	void * start_arg, // in
885	pthread_attr_t * attr, // in
886	xptr_t * thread_xp, // out
887	error_t * error ) // out
888	{
889	#if DEBUG_RPC_THREAD_USER_CREATE
890	thread_t * this = CURRENT_THREAD;
891	uint32_t cycle = (uint32_t)hal_get_cycles();
892	if( cycle > DEBUG_RPC_THREAD_USER_CREATE)
893	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
894	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
895	#endif
896
897	uint32_t responses = 1;
898
899	// initialise RPC descriptor header
900	rpc_desc_t rpc;
901	rpc.index = RPC_THREAD_USER_CREATE;
902	rpc.blocking = true;
903	rpc.rsp = &responses;
904
905	// set input arguments in RPC descriptor
906	rpc.args[0] = (uint64_t)pid;
907	rpc.args[1] = (uint64_t)(intptr_t)start_func;
908	rpc.args[2] = (uint64_t)(intptr_t)start_arg;
909	rpc.args[3] = (uint64_t)(intptr_t)attr;
910
911	// register RPC request in remote RPC fifo
912	rpc_send( cxy , &rpc );
913
914	// get output arguments from RPC descriptor
915	*thread_xp = (xptr_t)rpc.args[4];
916	*error = (error_t)rpc.args[5];
917
918	#if DEBUG_RPC_THREAD_USER_CREATE
919	cycle = (uint32_t)hal_get_cycles();
920	if( cycle > DEBUG_RPC_THREAD_USER_CREATE)
921	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
922	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
923	#endif
924	}
925
926	///////////////////////////////////////////////
927	void rpc_thread_user_create_server( xptr_t xp )
928	{
929	#if DEBUG_RPC_THREAD_USER_CREATE
930	thread_t * this = CURRENT_THREAD;
931	uint32_t cycle = (uint32_t)hal_get_cycles();
932	if( cycle > DEBUG_RPC_THREAD_USER_CREATE)
933	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
934	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
935	#endif
936
937	pthread_attr_t * attr_ptr; // pointer on attributes structure in client cluster
938	pthread_attr_t attr_copy; // attributes structure copy in server cluster
939	thread_t * thread_ptr; // local pointer on thread descriptor
940	xptr_t thread_xp; // extended pointer on thread descriptor
941
942	pid_t pid; // process identifier
943	void * start_func;
944	void * start_arg;
945	error_t error;
946
947	// get client cluster identifier and pointer on RPC descriptor
948	cxy_t client_cxy = GET_CXY( xp );
949	rpc_desc_t * desc = GET_PTR( xp );
950
951	// get input arguments from RPC descriptor
952	pid = (pid_t) hal_remote_l64(XPTR(client_cxy , &desc->args[0]));
953	start_func = (void *)(intptr_t) hal_remote_l64(XPTR(client_cxy , &desc->args[1]));
954	start_arg = (void *)(intptr_t) hal_remote_l64(XPTR(client_cxy , &desc->args[2]));
955	attr_ptr = (pthread_attr_t *)(intptr_t)hal_remote_l64(XPTR(client_cxy , &desc->args[3]));
956
957	// makes a local copy of attributes structure
958	hal_remote_memcpy( XPTR( local_cxy , &attr_copy ),
959	XPTR( client_cxy , attr_ptr ),
960	sizeof(pthread_attr_t) );
961
962	// call kernel function
963	error = thread_user_create( pid,
964	start_func,
965	start_arg,
966	&attr_copy,
967	&thread_ptr );
968	// set output arguments
969	thread_xp = XPTR( local_cxy , thread_ptr );
970	hal_remote_s64( XPTR( client_cxy , &desc->args[4] ) , (uint64_t)thread_xp );
971	hal_remote_s64( XPTR( client_cxy , &desc->args[5] ) , (uint64_t)error );
972
973	#if DEBUG_RPC_THREAD_USER_CREATE
974	cycle = (uint32_t)hal_get_cycles();
975	if( cycle > DEBUG_RPC_THREAD_USER_CREATE)
976	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
977	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
978	#endif
979	}
980
981	/////////////////////////////////////////////////////////////////////////////////////////
982	// [7] Marshaling functions attached to RPC_THREAD_KERNEL_CREATE
983	/////////////////////////////////////////////////////////////////////////////////////////
984
985	////////////////////////////////////////////////////
986	void rpc_thread_kernel_create_client( cxy_t cxy,
987	uint32_t type, // in
988	void * func, // in
989	void * args, // in
990	xptr_t * thread_xp, // out
991	error_t * error ) // out
992	{
993	#if DEBUG_RPC_THREAD_KERNEL_CREATE
994	thread_t * this = CURRENT_THREAD;
995	uint32_t cycle = (uint32_t)hal_get_cycles();
996	if( cycle > DEBUG_RPC_THREAD_KERNEL_CREATE)
997	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
998	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
999	#endif
1000
1001	uint32_t responses = 1;
1002
1003	// initialise RPC descriptor header
1004	rpc_desc_t rpc;
1005	rpc.index = RPC_THREAD_KERNEL_CREATE;
1006	rpc.blocking = true;
1007	rpc.rsp = &responses;
1008
1009	// set input arguments in RPC descriptor
1010	rpc.args[0] = (uint64_t)type;
1011	rpc.args[1] = (uint64_t)(intptr_t)func;
1012	rpc.args[2] = (uint64_t)(intptr_t)args;
1013
1014	// register RPC request in remote RPC fifo
1015	rpc_send( cxy , &rpc );
1016
1017	// get output arguments from RPC descriptor
1018	*thread_xp = (xptr_t)rpc.args[3];
1019	*error = (error_t)rpc.args[4];
1020
1021	#if DEBUG_RPC_THREAD_KERNEL_CREATE
1022	cycle = (uint32_t)hal_get_cycles();
1023	if( cycle > DEBUG_RPC_THREAD_KERNEL_CREATE)
1024	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
1025	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
1026	#endif
1027	}
1028
1029	/////////////////////////////////////////////////
1030	void rpc_thread_kernel_create_server( xptr_t xp )
1031	{
1032	#if DEBUG_RPC_THREAD_KERNEL_CREATE
1033	thread_t * this = CURRENT_THREAD;
1034	uint32_t cycle = (uint32_t)hal_get_cycles();
1035	if( cycle > DEBUG_RPC_THREAD_KERNEL_CREATE)
1036	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
1037	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
1038	#endif
1039
1040	thread_t * thread_ptr; // local pointer on thread descriptor
1041	xptr_t thread_xp; // extended pointer on thread descriptor
1042	lid_t core_lid; // core local index
1043	error_t error;
1044
1045	// get client cluster identifier and pointer on RPC descriptor
1046	cxy_t client_cxy = GET_CXY( xp );
1047	rpc_desc_t * desc = GET_PTR( xp );
1048
1049	// get attributes from RPC descriptor
1050	uint32_t type = (uint32_t) hal_remote_l64( XPTR( client_cxy , &desc->args[0] ) );
1051	void * func = (void*)(intptr_t)hal_remote_l64( XPTR( client_cxy , &desc->args[1] ) );
1052	void * args = (void*)(intptr_t)hal_remote_l64( XPTR( client_cxy , &desc->args[2] ) );
1053
1054	// select one core
1055	core_lid = cluster_select_local_core();
1056
1057	// call local kernel function
1058	error = thread_kernel_create( &thread_ptr , type , func , args , core_lid );
1059
1060	// set output arguments
1061	thread_xp = XPTR( local_cxy , thread_ptr );
1062	hal_remote_s64( XPTR( client_cxy , &desc->args[1] ) , (uint64_t)error );
1063	hal_remote_s64( XPTR( client_cxy , &desc->args[2] ) , (uint64_t)thread_xp );
1064
1065	#if DEBUG_RPC_THREAD_KERNEL_CREATE
1066	cycle = (uint32_t)hal_get_cycles();
1067	if( cycle > DEBUG_RPC_THREAD_KERNEL_CREATE)
1068	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
1069	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
1070	#endif
1071	}
1072
1073	/////////////////////////////////////////////////////////////////////////////////////////
1074	// [8] Marshaling functions attached to RPC_VRS_FS_UPDATE_DENTRY
1075	/////////////////////////////////////////////////////////////////////////////////////////
1076
1077	/////////////////////////////////////////////////////////
1078	void rpc_vfs_fs_update_dentry_client( cxy_t cxy,
1079	vfs_inode_t * inode,
1080	vfs_dentry_t * dentry,
1081	uint32_t size,
1082	error_t * error )
1083	{
1084	#if DEBUG_RPC_VFS_FS_UPDATE_DENTRY
1085	thread_t * this = CURRENT_THREAD;
1086	uint32_t cycle = (uint32_t)hal_get_cycles();
1087	if( cycle > DEBUG_RPC_VFS_FS_UPDATE_DENTRY )
1088	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
1089	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
1090	#endif
1091
1092	uint32_t responses = 1;
1093
1094	// initialise RPC descriptor header
1095	rpc_desc_t rpc;
1096	rpc.index = RPC_VFS_FS_UPDATE_DENTRY;
1097	rpc.blocking = true;
1098	rpc.rsp = &responses;
1099
1100	// set input arguments in RPC descriptor
1101	rpc.args[0] = (uint64_t)(intptr_t)inode;
1102	rpc.args[1] = (uint64_t)(intptr_t)dentry;
1103	rpc.args[2] = (uint64_t)size;
1104
1105	// register RPC request in remote RPC fifo
1106	rpc_send( cxy , &rpc );
1107
1108	// get output values from RPC descriptor
1109	*error = (error_t)rpc.args[3];
1110
1111	#if DEBUG_RPC_VFS_FS_UPDATE_DENTRY
1112	cycle = (uint32_t)hal_get_cycles();
1113	if( cycle > DEBUG_RPC_VFS_FS_UPDATE_DENTRY )
1114	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
1115	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
1116	#endif
1117	}
1118
1119	/////////////////////////////////////////////////
1120	void rpc_vfs_fs_update_dentry_server( xptr_t xp )
1121	{
1122	#if DEBUG_RPC_VFS_FS_UPDATE_DENTRY
1123	thread_t * this = CURRENT_THREAD;
1124	uint32_t cycle = (uint32_t)hal_get_cycles();
1125	if( cycle > DEBUG_RPC_VFS_FS_UPDATE_DENTRY )
1126	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
1127	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
1128	#endif
1129
1130	error_t error;
1131	vfs_inode_t * inode;
1132	vfs_dentry_t * dentry;
1133	uint32_t size;
1134
1135	// get client cluster identifier and pointer on RPC descriptor
1136	cxy_t client_cxy = GET_CXY( xp );
1137	rpc_desc_t * desc = GET_PTR( xp );
1138
1139	// get input arguments
1140	inode = (vfs_inode_t*)(intptr_t) hal_remote_l64(XPTR(client_cxy , &desc->args[0]));
1141	dentry = (vfs_dentry_t*)(intptr_t)hal_remote_l64(XPTR(client_cxy , &desc->args[1]));
1142	size = (uint32_t) hal_remote_l64(XPTR(client_cxy , &desc->args[2]));
1143
1144	// call the kernel function
1145	error = vfs_fs_update_dentry( inode , dentry , size );
1146
1147	// set output argument
1148	hal_remote_s64( XPTR( client_cxy , &desc->args[3] ) , (uint64_t)error );
1149
1150	#if DEBUG_RPC_VFS_FS_UPDATE_DENTRY
1151	cycle = (uint32_t)hal_get_cycles();
1152	if( cycle > DEBUG_RPC_VFS_FS_UPDATE_DENTRY )
1153	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
1154	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
1155	#endif
1156	}
1157
1158	/////////////////////////////////////////////////////////////////////////////////////////
1159	// [9] Marshaling functions attached to RPC_PROCESS_SIGACTION
1160	/////////////////////////////////////////////////////////////////////////////////////////
1161
1162	////////////////////////////////////////////////////
1163	void rpc_process_sigaction_client( cxy_t cxy,
1164	pid_t pid,
1165	uint32_t action )
1166	{
1167	#if DEBUG_RPC_PROCESS_SIGACTION
1168	uint32_t cycle = (uint32_t)hal_get_cycles();
1169	thread_t * this = CURRENT_THREAD;
1170	if( DEBUG_RPC_PROCESS_SIGACTION < cycle )
1171	printk("\n[%s] thread[%x,%x] on core %d : enter to %s process %x / cycle %d\n",
1172	__FUNCTION__, this->process->pid, this->trdid, this->core->lid,
1173	process_action_str( action ), pid, cycle );
1174	#endif
1175
1176	uint32_t responses = 1;
1177	rpc_desc_t rpc;
1178
1179	// initialise RPC descriptor header
1180	rpc.index = RPC_PROCESS_SIGACTION;
1181	rpc.blocking = true;
1182	rpc.rsp = &responses;
1183
1184	// set input arguments in RPC descriptor
1185	rpc.args[0] = (uint64_t)pid;
1186	rpc.args[1] = (uint64_t)action;
1187
1188	// register RPC request in remote RPC fifo
1189	rpc_send( cxy , &rpc );
1190
1191	#if DEBUG_RPC_PROCESS_SIGACTION
1192	cycle = (uint32_t)hal_get_cycles();
1193	if( DEBUG_RPC_PROCESS_SIGACTION < cycle )
1194	printk("\n[%s] thread[%x,%x] on core %d : exit after %s process %x / cycle %d\n",
1195	__FUNCTION__, this->process->pid, this->trdid, this->core->lid,
1196	process_action_str( action ), pid, cycle );
1197	#endif
1198	} // end rpc_process_sigaction_client()
1199
1200	//////////////////////////////////////////////
1201	void rpc_process_sigaction_server( xptr_t xp )
1202	{
1203	// get client cluster identifier and pointer on RPC descriptor
1204	cxy_t client_cxy = GET_CXY( xp );
1205	rpc_desc_t * desc = GET_PTR( xp );
1206
1207	// get arguments from RPC descriptor
1208	pid_t pid = (pid_t) hal_remote_l64( XPTR(client_cxy , &desc->args[0]) );
1209	uint32_t action = (uint32_t)hal_remote_l64( XPTR(client_cxy , &desc->args[1]) );
1210
1211	#if DEBUG_RPC_PROCESS_SIGACTION
1212	uint32_t cycle = (uint32_t)hal_get_cycles();
1213	thread_t * this = CURRENT_THREAD;
1214	if( DEBUG_RPC_PROCESS_SIGACTION < cycle )
1215	printk("\n[%s] thread[%x,%x] on core %d : enter to %s process %x / cycle %d\n",
1216	__FUNCTION__, this->process->pid, this->trdid, this->core->lid,
1217	process_action_str( action ), pid, cycle );
1218	#endif
1219
1220	// get client thread pointers
1221	thread_t * client_ptr = hal_remote_lpt( XPTR( client_cxy , &desc->thread ) );
1222	xptr_t client_xp = XPTR( client_cxy , client_ptr );
1223
1224	// get local process descriptor
1225	process_t * process = cluster_get_local_process_from_pid( pid );
1226
1227	// call relevant kernel function if found / does nothing if not found
1228	if( process != NULL )
1229	{
1230	if ( action == DELETE_ALL_THREADS ) process_delete_threads ( process , client_xp );
1231	if ( action == BLOCK_ALL_THREADS ) process_block_threads ( process );
1232	if ( action == UNBLOCK_ALL_THREADS ) process_unblock_threads( process );
1233	}
1234
1235	#if DEBUG_RPC_PROCESS_SIGACTION
1236	cycle = (uint32_t)hal_get_cycles();
1237	if( DEBUG_RPC_PROCESS_SIGACTION < cycle )
1238	printk("\n[%s] thread[%x,%x] on core %d : exit after %s process %x / cycle %d\n",
1239	__FUNCTION__, this->process->pid, this->trdid, this->core->lid,
1240	process_action_str( action ), pid, cycle );
1241	#endif
1242	} // end rpc_process_sigaction_server()
1243
1244	/////////////////////////////////////////////////////////////////////////////////////////
1245	// [10] Marshaling functions attached to RPC_VFS_INODE_CREATE
1246	/////////////////////////////////////////////////////////////////////////////////////////
1247
1248	/////////////////////////////////////////////////////
1249	void rpc_vfs_inode_create_client( cxy_t cxy,
1250	uint32_t fs_type, // in
1251	uint32_t attr, // in
1252	uint32_t rights, // in
1253	uint32_t uid, // in
1254	uint32_t gid, // in
1255	xptr_t * inode_xp, // out
1256	error_t * error ) // out
1257	{
1258	#if DEBUG_RPC_VFS_INODE_CREATE
1259	thread_t * this = CURRENT_THREAD;
1260	uint32_t cycle = (uint32_t)hal_get_cycles();
1261	if( cycle > DEBUG_RPC_VFS_INODE_CREATE )
1262	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
1263	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
1264	#endif
1265
1266	uint32_t responses = 1;
1267
1268	// initialise RPC descriptor header
1269	rpc_desc_t rpc;
1270	rpc.index = RPC_VFS_INODE_CREATE;
1271	rpc.blocking = true;
1272	rpc.rsp = &responses;
1273
1274	// set input arguments in RPC descriptor
1275	rpc.args[0] = (uint64_t)fs_type;
1276	rpc.args[1] = (uint64_t)attr;
1277	rpc.args[2] = (uint64_t)rights;
1278	rpc.args[3] = (uint64_t)uid;
1279	rpc.args[4] = (uint64_t)gid;
1280
1281	// register RPC request in remote RPC fifo
1282	rpc_send( cxy , &rpc );
1283
1284	// get output values from RPC descriptor
1285	*inode_xp = (xptr_t)rpc.args[5];
1286	*error = (error_t)rpc.args[6];
1287
1288	#if DEBUG_RPC_VFS_INODE_CREATE
1289	cycle = (uint32_t)hal_get_cycles();
1290	if( cycle > DEBUG_RPC_VFS_INODE_CREATE )
1291	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
1292	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
1293	#endif
1294	}
1295
1296	/////////////////////////////////////////////
1297	void rpc_vfs_inode_create_server( xptr_t xp )
1298	{
1299	#if DEBUG_RPC_VFS_INODE_CREATE
1300	thread_t * this = CURRENT_THREAD;
1301	uint32_t cycle = (uint32_t)hal_get_cycles();
1302	if( cycle > DEBUG_RPC_VFS_INODE_CREATE )
1303	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
1304	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
1305	#endif
1306
1307	uint32_t fs_type;
1308	uint32_t attr;
1309	uint32_t rights;
1310	uint32_t uid;
1311	uint32_t gid;
1312	xptr_t inode_xp;
1313	error_t error;
1314
1315	// get client cluster identifier and pointer on RPC descriptor
1316	cxy_t client_cxy = GET_CXY( xp );
1317	rpc_desc_t * desc = GET_PTR( xp );
1318
1319	// get input arguments from client rpc descriptor
1320	fs_type = (uint32_t) hal_remote_l64( XPTR( client_cxy , &desc->args[0] ) );
1321	attr = (uint32_t) hal_remote_l64( XPTR( client_cxy , &desc->args[1] ) );
1322	rights = (uint32_t) hal_remote_l64( XPTR( client_cxy , &desc->args[2] ) );
1323	uid = (uid_t) hal_remote_l64( XPTR( client_cxy , &desc->args[3] ) );
1324	gid = (gid_t) hal_remote_l64( XPTR( client_cxy , &desc->args[4] ) );
1325
1326	// call local kernel function
1327	error = vfs_inode_create( fs_type,
1328	attr,
1329	rights,
1330	uid,
1331	gid,
1332	&inode_xp );
1333
1334	// set output arguments
1335	hal_remote_s64( XPTR( client_cxy , &desc->args[5] ) , (uint64_t)inode_xp );
1336	hal_remote_s64( XPTR( client_cxy , &desc->args[6] ) , (uint64_t)error );
1337
1338	#if DEBUG_RPC_VFS_INODE_CREATE
1339	cycle = (uint32_t)hal_get_cycles();
1340	if( cycle > DEBUG_RPC_VFS_INODE_CREATE )
1341	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
1342	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
1343	#endif
1344	}
1345
1346	/////////////////////////////////////////////////////////////////////////////////////////
1347	// [11] Marshaling functions attached to RPC_VFS_INODE_DESTROY
1348	/////////////////////////////////////////////////////////////////////////////////////////
1349
1350	/////////////////////////////////////////////////////////////
1351	void rpc_vfs_inode_destroy_client( cxy_t cxy,
1352	struct vfs_inode_s * inode )
1353	{
1354	#if DEBUG_RPC_VFS_INODE_DESTROY
1355	thread_t * this = CURRENT_THREAD;
1356	uint32_t cycle = (uint32_t)hal_get_cycles();
1357	if( cycle > DEBUG_RPC_VFS_INODE_DESTROY )
1358	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
1359	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
1360	#endif
1361
1362	uint32_t responses = 1;
1363
1364	// initialise RPC descriptor header
1365	rpc_desc_t rpc;
1366	rpc.index = RPC_VFS_INODE_DESTROY;
1367	rpc.blocking = true;
1368	rpc.rsp = &responses;
1369
1370	// set input arguments in RPC descriptor
1371	rpc.args[0] = (uint64_t)(intptr_t)inode;
1372
1373	// register RPC request in remote RPC fifo
1374	rpc_send( cxy , &rpc );
1375
1376	#if DEBUG_RPC_VFS_INODE_DESTROY
1377	cycle = (uint32_t)hal_get_cycles();
1378	if( cycle > DEBUG_RPC_VFS_INODE_DESTROY )
1379	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
1380	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
1381	#endif
1382	}
1383
1384	//////////////////////////////////////////////
1385	void rpc_vfs_inode_destroy_server( xptr_t xp )
1386	{
1387	#if DEBUG_RPC_VFS_INODE_DESTROY
1388	thread_t * this = CURRENT_THREAD;
1389	uint32_t cycle = (uint32_t)hal_get_cycles();
1390	if( cycle > DEBUG_RPC_VFS_INODE_DESTROY )
1391	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
1392	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
1393	#endif
1394
1395	vfs_inode_t * inode;
1396
1397	// get client cluster identifier and pointer on RPC descriptor
1398	cxy_t client_cxy = GET_CXY( xp );
1399	rpc_desc_t * desc = GET_PTR( xp );
1400
1401	// get argument "inode" from client RPC descriptor
1402	inode = (vfs_inode_t *)(intptr_t)hal_remote_l64( XPTR( client_cxy , &desc->args[0] ) );
1403
1404	// call local kernel function
1405	vfs_inode_destroy( inode );
1406
1407	#if DEBUG_RPC_VFS_INODE_DESTROY
1408	cycle = (uint32_t)hal_get_cycles();
1409	if( cycle > DEBUG_RPC_VFS_INODE_DESTROY )
1410	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
1411	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
1412	#endif
1413	}
1414
1415	/////////////////////////////////////////////////////////////////////////////////////////
1416	// [12] Marshaling functions attached to RPC_VFS_DENTRY_CREATE
1417	/////////////////////////////////////////////////////////////////////////////////////////
1418
1419	//////////////////////////////////////////////////////////////
1420	void rpc_vfs_dentry_create_client( cxy_t cxy,
1421	uint32_t type, // in
1422	char * name, // in
1423	xptr_t * dentry_xp, // out
1424	error_t * error ) // out
1425	{
1426	#if DEBUG_RPC_VFS_DENTRY_CREATE
1427	thread_t * this = CURRENT_THREAD;
1428	uint32_t cycle = (uint32_t)hal_get_cycles();
1429	if( cycle > DEBUG_RPC_VFS_DENTRY_CREATE )
1430	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
1431	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
1432	#endif
1433
1434	uint32_t responses = 1;
1435
1436	// initialise RPC descriptor header
1437	rpc_desc_t rpc;
1438	rpc.index = RPC_VFS_DENTRY_CREATE;
1439	rpc.blocking = true;
1440	rpc.rsp = &responses;
1441
1442	// set input arguments in RPC descriptor
1443	rpc.args[0] = (uint64_t)type;
1444	rpc.args[1] = (uint64_t)(intptr_t)name;
1445
1446	// register RPC request in remote RPC fifo
1447	rpc_send( cxy , &rpc );
1448
1449	// get output values from RPC descriptor
1450	*dentry_xp = (xptr_t)rpc.args[2];
1451	*error = (error_t)rpc.args[3];
1452
1453	#if DEBUG_RPC_VFS_DENTRY_CREATE
1454	cycle = (uint32_t)hal_get_cycles();
1455	if( cycle > DEBUG_RPC_VFS_DENTRY_CREATE )
1456	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
1457	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
1458	#endif
1459	}
1460
1461	//////////////////////////////////////////////
1462	void rpc_vfs_dentry_create_server( xptr_t xp )
1463	{
1464	#if DEBUG_RPC_VFS_DENTRY_CREATE
1465	thread_t * this = CURRENT_THREAD;
1466	uint32_t cycle = (uint32_t)hal_get_cycles();
1467	if( cycle > DEBUG_RPC_VFS_DENTRY_CREATE )
1468	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
1469	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
1470	#endif
1471
1472	uint32_t type;
1473	char * name;
1474	xptr_t dentry_xp;
1475	error_t error;
1476	char name_copy[CONFIG_VFS_MAX_NAME_LENGTH];
1477
1478	// get client cluster identifier and pointer on RPC descriptor
1479	cxy_t client_cxy = GET_CXY( xp );
1480	rpc_desc_t * desc = GET_PTR( xp );
1481
1482	// get arguments "name", "type", and "parent" from client RPC descriptor
1483	type = (uint32_t) hal_remote_l64( XPTR( client_cxy , &desc->args[0] ) );
1484	name = (char *)(intptr_t) hal_remote_l64( XPTR( client_cxy , &desc->args[1] ) );
1485
1486	// makes a local copy of name
1487	hal_remote_strcpy( XPTR( local_cxy , name_copy ),
1488	XPTR( client_cxy , name ) );
1489
1490	// call local kernel function
1491	error = vfs_dentry_create( type,
1492	name_copy,
1493	&dentry_xp );
1494	// set output arguments
1495	hal_remote_s64( XPTR( client_cxy , &desc->args[2] ) , (uint64_t)dentry_xp );
1496	hal_remote_s64( XPTR( client_cxy , &desc->args[3] ) , (uint64_t)error );
1497
1498	#if DEBUG_RPC_VFS_DENTRY_CREATE
1499	cycle = (uint32_t)hal_get_cycles();
1500	if( cycle > DEBUG_RPC_VFS_DENTRY_CREATE )
1501	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
1502	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
1503	#endif
1504	}
1505
1506	/////////////////////////////////////////////////////////////////////////////////////////
1507	// [13] Marshaling functions attached to RPC_VFS_DENTRY_DESTROY
1508	/////////////////////////////////////////////////////////////////////////////////////////
1509
1510	///////////////////////////////////////////////////////
1511	void rpc_vfs_dentry_destroy_client( cxy_t cxy,
1512	vfs_dentry_t * dentry )
1513	{
1514	#if DEBUG_RPC_VFS_DENTRY_DESTROY
1515	thread_t * this = CURRENT_THREAD;
1516	uint32_t cycle = (uint32_t)hal_get_cycles();
1517	if( cycle > DEBUG_RPC_VFS_DENTRY_DESTROY )
1518	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
1519	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
1520	#endif
1521
1522	uint32_t responses = 1;
1523
1524	// initialise RPC descriptor header
1525	rpc_desc_t rpc;
1526	rpc.index = RPC_VFS_DENTRY_DESTROY;
1527	rpc.blocking = true;
1528	rpc.rsp = &responses;
1529
1530	// set input arguments in RPC descriptor
1531	rpc.args[0] = (uint64_t)(intptr_t)dentry;
1532
1533	// register RPC request in remote RPC fifo
1534	rpc_send( cxy , &rpc );
1535
1536	#if DEBUG_RPC_VFS_DENTRY_DESTROY
1537	cycle = (uint32_t)hal_get_cycles();
1538	if( cycle > DEBUG_RPC_VFS_DENTRY_DESTROY )
1539	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
1540	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
1541	#endif
1542	}
1543
1544	///////////////////////////////////////////////
1545	void rpc_vfs_dentry_destroy_server( xptr_t xp )
1546	{
1547	#if DEBUG_RPC_VFS_DENTRY_DESTROY
1548	thread_t * this = CURRENT_THREAD;
1549	uint32_t cycle = (uint32_t)hal_get_cycles();
1550	if( cycle > DEBUG_RPC_VFS_DENTRY_DESTROY )
1551	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
1552	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
1553	#endif
1554
1555	vfs_dentry_t * dentry;
1556
1557	// get client cluster identifier and pointer on RPC descriptor
1558	cxy_t client_cxy = GET_CXY( xp );
1559	rpc_desc_t * desc = GET_PTR( xp );
1560
1561	// get arguments "dentry" from client RPC descriptor
1562	dentry = (vfs_dentry_t *)(intptr_t)hal_remote_l64( XPTR( client_cxy , &desc->args[0] ) );
1563
1564	// call local kernel function
1565	vfs_dentry_destroy( dentry );
1566
1567	#if DEBUG_RPC_VFS_DENTRY_DESTROY
1568	cycle = (uint32_t)hal_get_cycles();
1569	if( cycle > DEBUG_RPC_VFS_DENTRY_DESTROY )
1570	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
1571	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
1572	#endif
1573	}
1574
1575
1576	/////////////////////////////////////////////////////////////////////////////////////////
1577	// [14] Marshaling functions attached to RPC_VFS_FILE_CREATE
1578	/////////////////////////////////////////////////////////////////////////////////////////
1579
1580	//////////////////////////////////////////////////////////////
1581	void rpc_vfs_file_create_client( cxy_t cxy,
1582	struct vfs_inode_s * inode, // in
1583	uint32_t file_attr, // in
1584	xptr_t * file_xp, // out
1585	error_t * error ) // out
1586	{
1587	#if DEBUG_RPC_VFS_FILE_CREATE
1588	thread_t * this = CURRENT_THREAD;
1589	uint32_t cycle = (uint32_t)hal_get_cycles();
1590	if( cycle > DEBUG_RPC_VFS_FILE_CREATE )
1591	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
1592	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
1593	#endif
1594
1595	uint32_t responses = 1;
1596
1597	// initialise RPC descriptor header
1598	rpc_desc_t rpc;
1599	rpc.index = RPC_VFS_FILE_CREATE;
1600	rpc.blocking = true;
1601	rpc.rsp = &responses;
1602
1603	// set input arguments in RPC descriptor
1604	rpc.args[0] = (uint64_t)(intptr_t)inode;
1605	rpc.args[1] = (uint64_t)file_attr;
1606
1607	// register RPC request in remote RPC fifo
1608	rpc_send( cxy , &rpc );
1609
1610	// get output values from RPC descriptor
1611	*file_xp = (xptr_t)rpc.args[2];
1612	*error = (error_t)rpc.args[3];
1613
1614	#if DEBUG_RPC_VFS_FILE_CREATE
1615	cycle = (uint32_t)hal_get_cycles();
1616	if( cycle > DEBUG_RPC_VFS_FILE_CREATE )
1617	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
1618	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
1619	#endif
1620	}
1621
1622	////////////////////////////////////////////
1623	void rpc_vfs_file_create_server( xptr_t xp )
1624	{
1625	#if DEBUG_RPC_VFS_FILE_CREATE
1626	thread_t * this = CURRENT_THREAD;
1627	uint32_t cycle = (uint32_t)hal_get_cycles();
1628	if( cycle > DEBUG_RPC_VFS_FILE_CREATE )
1629	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
1630	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
1631	#endif
1632
1633	uint32_t file_attr;
1634	vfs_inode_t * inode;
1635	xptr_t file_xp;
1636	error_t error;
1637
1638	// get client cluster identifier and pointer on RPC descriptor
1639	cxy_t client_cxy = GET_CXY( xp );
1640	rpc_desc_t * desc = GET_PTR( xp );
1641
1642	// get arguments "file_attr" and "inode" from client RPC descriptor
1643	inode = (vfs_inode_t *)(intptr_t)hal_remote_l64( XPTR( client_cxy , &desc->args[0] ) );
1644	file_attr = (uint32_t) hal_remote_l64( XPTR( client_cxy , &desc->args[1] ) );
1645
1646	// call local kernel function
1647	error = vfs_file_create( inode,
1648	file_attr,
1649	&file_xp );
1650
1651	// set output arguments
1652	hal_remote_s64( XPTR( client_cxy , &desc->args[2] ) , (uint64_t)file_xp );
1653	hal_remote_s64( XPTR( client_cxy , &desc->args[3] ) , (uint64_t)error );
1654
1655	#if DEBUG_RPC_VFS_FILE_CREATE
1656	cycle = (uint32_t)hal_get_cycles();
1657	if( cycle > DEBUG_RPC_VFS_FILE_CREATE )
1658	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
1659	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
1660	#endif
1661	}
1662
1663	/////////////////////////////////////////////////////////////////////////////////////////
1664	// [15] Marshaling functions attached to RPC_VFS_FILE_DESTROY
1665	/////////////////////////////////////////////////////////////////////////////////////////
1666
1667	///////////////////////////////////////////////////
1668	void rpc_vfs_file_destroy_client( cxy_t cxy,
1669	vfs_file_t * file )
1670	{
1671	#if DEBUG_RPC_VFS_FILE_DESTROY
1672	thread_t * this = CURRENT_THREAD;
1673	uint32_t cycle = (uint32_t)hal_get_cycles();
1674	if( cycle > DEBUG_RPC_VFS_FILE_DESTROY )
1675	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
1676	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
1677	#endif
1678
1679	uint32_t responses = 1;
1680
1681	// initialise RPC descriptor header
1682	rpc_desc_t rpc;
1683	rpc.index = RPC_VFS_FILE_DESTROY;
1684	rpc.blocking = true;
1685	rpc.rsp = &responses;
1686
1687	// set input arguments in RPC descriptor
1688	rpc.args[0] = (uint64_t)(intptr_t)file;
1689
1690	// register RPC request in remote RPC fifo
1691	rpc_send( cxy , &rpc );
1692
1693	#if DEBUG_RPC_VFS_FILE_DESTROY
1694	cycle = (uint32_t)hal_get_cycles();
1695	if( cycle > DEBUG_RPC_VFS_FILE_DESTROY )
1696	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
1697	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
1698	#endif
1699	}
1700
1701	/////////////////////////////////////////////
1702	void rpc_vfs_file_destroy_server( xptr_t xp )
1703	{
1704	#if DEBUG_RPC_VFS_FILE_DESTROY
1705	thread_t * this = CURRENT_THREAD;
1706	uint32_t cycle = (uint32_t)hal_get_cycles();
1707	if( cycle > DEBUG_RPC_VFS_FILE_DESTROY )
1708	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
1709	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
1710	#endif
1711
1712	vfs_file_t * file;
1713
1714	// get client cluster identifier and pointer on RPC descriptor
1715	cxy_t client_cxy = GET_CXY( xp );
1716	rpc_desc_t * desc = GET_PTR( xp );
1717
1718	// get arguments "dentry" from client RPC descriptor
1719	file = (vfs_file_t *)(intptr_t)hal_remote_l64( XPTR( client_cxy , &desc->args[0] ) );
1720
1721	// call local kernel function
1722	vfs_file_destroy( file );
1723
1724	#if DEBUG_RPC_VFS_FILE_DESTROY
1725	cycle = (uint32_t)hal_get_cycles();
1726	if( cycle > DEBUG_RPC_VFS_FILE_DESTROY )
1727	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
1728	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
1729	#endif
1730	}
1731
1732	/////////////////////////////////////////////////////////////////////////////////////////
1733	// [16] Marshaling functions attached to RPC_VFS_FS_GET_DENTRY
1734	/////////////////////////////////////////////////////////////////////////////////////////
1735
1736	/////////////////////////////////////////////////////////
1737	void rpc_vfs_fs_new_dentry_client( cxy_t cxy,
1738	vfs_inode_t * parent_inode, // in
1739	char * name, // in
1740	xptr_t child_inode_xp, // in
1741	error_t * error ) // out
1742	{
1743	#if DEBUG_RPC_VFS_FS_NEW_DENTRY
1744	thread_t * this = CURRENT_THREAD;
1745	uint32_t cycle = (uint32_t)hal_get_cycles();
1746	if( cycle > DEBUG_RPC_VFS_FS_NEW_DENTRY )
1747	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
1748	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
1749	#endif
1750
1751	uint32_t responses = 1;
1752
1753	// initialise RPC descriptor header
1754	rpc_desc_t rpc;
1755	rpc.index = RPC_VFS_FS_NEW_DENTRY;
1756	rpc.blocking = true;
1757	rpc.rsp = &responses;
1758
1759	// set input arguments in RPC descriptor
1760	rpc.args[0] = (uint64_t)(intptr_t)parent_inode;
1761	rpc.args[1] = (uint64_t)(intptr_t)name;
1762	rpc.args[2] = (uint64_t)child_inode_xp;
1763
1764	// register RPC request in remote RPC fifo
1765	rpc_send( cxy , &rpc );
1766
1767	// get output values from RPC descriptor
1768	*error = (error_t)rpc.args[3];
1769
1770	#if DEBUG_RPC_VFS_FS_NEW_DENTRY
1771	cycle = (uint32_t)hal_get_cycles();
1772	if( cycle > DEBUG_RPC_VFS_FS_NEW_DENTRY )
1773	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
1774	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
1775	#endif
1776	}
1777
1778	//////////////////////////////////////////////
1779	void rpc_vfs_fs_new_dentry_server( xptr_t xp )
1780	{
1781	#if DEBUG_RPC_VFS_FS_NEW_DENTRY
1782	thread_t * this = CURRENT_THREAD;
1783	uint32_t cycle = (uint32_t)hal_get_cycles();
1784	if( cycle > DEBUG_RPC_VFS_FS_NEW_DENTRY )
1785	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
1786	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
1787	#endif
1788
1789	error_t error;
1790	vfs_inode_t * parent;
1791	xptr_t child_xp;
1792	char * name;
1793
1794	char name_copy[CONFIG_VFS_MAX_NAME_LENGTH];
1795
1796	// get client cluster identifier and pointer on RPC descriptor
1797	cxy_t client_cxy = GET_CXY( xp );
1798	rpc_desc_t * desc = GET_PTR( xp );
1799
1800	// get arguments "parent", "name", and "child_xp"
1801	parent = (vfs_inode_t*)(intptr_t)hal_remote_l64(XPTR(client_cxy , &desc->args[0]));
1802	name = (char*)(intptr_t) hal_remote_l64(XPTR(client_cxy , &desc->args[1]));
1803	child_xp = (xptr_t) hal_remote_l64(XPTR(client_cxy , &desc->args[2]));
1804
1805	// get name local copy
1806	hal_remote_strcpy( XPTR( local_cxy , name_copy ) ,
1807	XPTR( client_cxy , name ) );
1808
1809	// call the kernel function
1810	error = vfs_fs_new_dentry( parent , name_copy , child_xp );
1811
1812	// set output argument
1813	hal_remote_s64( XPTR( client_cxy , &desc->args[3] ) , (uint64_t)error );
1814
1815	#if DEBUG_RPC_VFS_FS_NEW_DENTRY
1816	cycle = (uint32_t)hal_get_cycles();
1817	if( cycle > DEBUG_RPC_VFS_FS_NEW_DENTRY )
1818	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
1819	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
1820	#endif
1821	}
1822
1823	/////////////////////////////////////////////////////////////////////////////////////////
1824	// [17] Marshaling function attached to RPC_VFS_FS_ADD_DENTRY
1825	/////////////////////////////////////////////////////////////////////////////////////////
1826
1827	void rpc_vfs_fs_add_dentry_client( cxy_t cxy,
1828	vfs_inode_t * parent, // in
1829	vfs_dentry_t * dentry, // in
1830	error_t * error ) // out
1831	{
1832	#if DEBUG_RPC_VFS_FS_ADD_DENTRY
1833	thread_t * this = CURRENT_THREAD;
1834	uint32_t cycle = (uint32_t)hal_get_cycles();
1835	if( cycle > DEBUG_RPC_VFS_FS_ADD_DENTRY )
1836	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
1837	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
1838	#endif
1839
1840	uint32_t responses = 1;
1841
1842	// initialise RPC descriptor header
1843	rpc_desc_t rpc;
1844	rpc.index = RPC_VFS_FS_ADD_DENTRY;
1845	rpc.blocking = true;
1846	rpc.rsp = &responses;
1847
1848	// set input arguments in RPC descriptor
1849	rpc.args[0] = (uint64_t)(intptr_t)parent;
1850	rpc.args[1] = (uint64_t)(intptr_t)dentry;
1851
1852	// register RPC request in remote RPC fifo
1853	rpc_send( cxy , &rpc );
1854
1855	// get output values from RPC descriptor
1856	*error = (error_t)rpc.args[2];
1857
1858	#if DEBUG_RPC_VFS_FS_ADD_DENTRY
1859	cycle = (uint32_t)hal_get_cycles();
1860	if( cycle > DEBUG_RPC_VFS_FS_ADD_DENTRY )
1861	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
1862	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
1863	#endif
1864	}
1865
1866	//////////////////////////////////////////////
1867	void rpc_vfs_fs_add_dentry_server( xptr_t xp )
1868	{
1869	#if DEBUG_RPC_VFS_FS_ADD_DENTRY
1870	thread_t * this = CURRENT_THREAD;
1871	uint32_t cycle = (uint32_t)hal_get_cycles();
1872	if( cycle > DEBUG_RPC_VFS_FS_ADD_DENTRY )
1873	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
1874	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
1875	#endif
1876
1877	error_t error;
1878	vfs_inode_t * parent;
1879	vfs_dentry_t * dentry;
1880
1881	// get client cluster identifier and pointer on RPC descriptor
1882	cxy_t client_cxy = GET_CXY( xp );
1883	rpc_desc_t * desc = GET_PTR( xp );
1884
1885	// get input arguments
1886	parent = (vfs_inode_t*)(intptr_t) hal_remote_l64(XPTR(client_cxy , &desc->args[0]));
1887	dentry = (vfs_dentry_t*)(intptr_t)hal_remote_l64(XPTR(client_cxy , &desc->args[1]));
1888
1889	// call the kernel function
1890	error = vfs_fs_add_dentry( parent , dentry );
1891
1892	// set output argument
1893	hal_remote_s64( XPTR( client_cxy , &desc->args[2] ) , (uint64_t)error );
1894
1895	#if DEBUG_RPC_VFS_FS_ADD_DENTRY
1896	cycle = (uint32_t)hal_get_cycles();
1897	if( cycle > DEBUG_RPC_VFS_FS_ADD_DENTRY )
1898	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
1899	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
1900	#endif
1901	}
1902
1903	/////////////////////////////////////////////////////////////////////////////////////////
1904	// [18] Marshaling function attached to RPC_VFS_FS_REMOVE_DENTRY
1905	/////////////////////////////////////////////////////////////////////////////////////////
1906
1907	void rpc_vfs_fs_remove_dentry_client( cxy_t cxy,
1908	vfs_inode_t * parent, // in
1909	vfs_dentry_t * dentry, // in
1910	error_t * error ) // out
1911	{
1912	#if DEBUG_RPC_VFS_FS_REMOVE_DENTRY
1913	thread_t * this = CURRENT_THREAD;
1914	uint32_t cycle = (uint32_t)hal_get_cycles();
1915	if( cycle > DEBUG_RPC_VFS_FS_REMOVE_DENTRY )
1916	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
1917	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
1918	#endif
1919
1920	uint32_t responses = 1;
1921
1922	// initialise RPC descriptor header
1923	rpc_desc_t rpc;
1924	rpc.index = RPC_VFS_FS_REMOVE_DENTRY;
1925	rpc.blocking = true;
1926	rpc.rsp = &responses;
1927
1928	// set input arguments in RPC descriptor
1929	rpc.args[0] = (uint64_t)(intptr_t)parent;
1930	rpc.args[1] = (uint64_t)(intptr_t)dentry;
1931
1932	// register RPC request in remote RPC fifo
1933	rpc_send( cxy , &rpc );
1934
1935	// get output values from RPC descriptor
1936	*error = (error_t)rpc.args[2];
1937
1938	#if DEBUG_RPC_VFS_FS_REMOVE_DENTRY
1939	cycle = (uint32_t)hal_get_cycles();
1940	if( cycle > DEBUG_RPC_VFS_FS_REMOVE_DENTRY )
1941	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
1942	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
1943	#endif
1944	}
1945
1946	/////////////////////////////////////////////////
1947	void rpc_vfs_fs_remove_dentry_server( xptr_t xp )
1948	{
1949	#if DEBUG_RPC_VFS_FS_REMOVE_DENTRY
1950	thread_t * this = CURRENT_THREAD;
1951	uint32_t cycle = (uint32_t)hal_get_cycles();
1952	if( cycle > DEBUG_RPC_VFS_FS_REMOVE_DENTRY )
1953	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
1954	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
1955	#endif
1956
1957	error_t error;
1958	vfs_inode_t * parent;
1959	vfs_dentry_t * dentry;
1960
1961	// get client cluster identifier and pointer on RPC descriptor
1962	cxy_t client_cxy = GET_CXY( xp );
1963	rpc_desc_t * desc = GET_PTR( xp );
1964
1965	// get input arguments
1966	parent = (vfs_inode_t*)(intptr_t) hal_remote_l64(XPTR(client_cxy , &desc->args[0]));
1967	dentry = (vfs_dentry_t*)(intptr_t)hal_remote_l64(XPTR(client_cxy , &desc->args[1]));
1968
1969	// call the kernel function
1970	error = vfs_fs_remove_dentry( parent , dentry );
1971
1972	// set output argument
1973	hal_remote_s64( XPTR( client_cxy , &desc->args[2] ) , (uint64_t)error );
1974
1975	#if DEBUG_RPC_VFS_FS_REMOVE_DENTRY
1976	cycle = (uint32_t)hal_get_cycles();
1977	if( cycle > DEBUG_RPC_VFS_FS_REMOVE_DENTRY )
1978	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
1979	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
1980	#endif
1981	}
1982
1983	/////////////////////////////////////////////////////////////////////////////////////////
1984	// [19] Marshaling functions attached to RPC_VFS_INODE_LOAD_ALL_PAGES
1985	/////////////////////////////////////////////////////////////////////////////////////////
1986
1987	////////////////////////////////////////////////////////////
1988	void rpc_vfs_inode_load_all_pages_client( cxy_t cxy,
1989	vfs_inode_t * inode, // in
1990	error_t * error ) // out
1991	{
1992	#if DEBUG_RPC_VFS_INODE_LOAD_ALL_PAGES
1993	thread_t * this = CURRENT_THREAD;
1994	uint32_t cycle = (uint32_t)hal_get_cycles();
1995	if( cycle > DEBUG_RPC_VFS_INODE_LOAD_ALL_PAGES )
1996	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
1997	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
1998	#endif
1999
2000	uint32_t responses = 1;
2001
2002	// initialise RPC descriptor header
2003	rpc_desc_t rpc;
2004	rpc.index = RPC_VFS_INODE_LOAD_ALL_PAGES;
2005	rpc.blocking = true;
2006	rpc.rsp = &responses;
2007
2008	// set input arguments in RPC descriptor
2009	rpc.args[0] = (uint64_t)(intptr_t)inode;
2010
2011	// register RPC request in remote RPC fifo
2012	rpc_send( cxy , &rpc );
2013
2014	// get output values from RPC descriptor
2015	*error = (error_t)rpc.args[1];
2016
2017	#if DEBUG_RPC_VFS_INODE_LOAD_ALL_PAGES
2018	cycle = (uint32_t)hal_get_cycles();
2019	if( cycle > DEBUG_RPC_VFS_INODE_LOAD_ALL_PAGES )
2020	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
2021	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2022	#endif
2023	}
2024
2025	/////////////////////////////////////////////////////
2026	void rpc_vfs_inode_load_all_pages_server( xptr_t xp )
2027	{
2028	#if DEBUG_RPC_VFS_INODE_LOAD_ALL_PAGES
2029	thread_t * this = CURRENT_THREAD;
2030	uint32_t cycle = (uint32_t)hal_get_cycles();
2031	if( cycle > DEBUG_RPC_VFS_INODE_LOAD_ALL_PAGES )
2032	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
2033	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2034	#endif
2035
2036	error_t error;
2037	vfs_inode_t * inode;
2038
2039	// get client cluster identifier and pointer on RPC descriptor
2040	cxy_t client_cxy = GET_CXY( xp );
2041	rpc_desc_t * desc = GET_PTR( xp );
2042
2043	// get input argument
2044	inode = (vfs_inode_t*)(intptr_t)hal_remote_l64(XPTR(client_cxy , &desc->args[0]));
2045
2046	// call the kernel function
2047	error = vfs_inode_load_all_pages( inode );
2048
2049	// set output argument
2050	hal_remote_s64( XPTR( client_cxy , &desc->args[1] ) , (uint64_t)error );
2051
2052	#if DEBUG_RPC_VFS_INODE_LOAD_ALL_PAGES
2053	cycle = (uint32_t)hal_get_cycles();
2054	if( cycle > DEBUG_RPC_VFS_INODE_LOAD_ALL_PAGES )
2055	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
2056	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2057	#endif
2058	}
2059
2060	/////////////////////////////////////////////////////////////////////////////////////////
2061	// [20] Marshaling functions attached to RPC_VMM_GET_VSEG
2062	/////////////////////////////////////////////////////////////////////////////////////////
2063
2064	//////////////////////////////////////////////////
2065	void rpc_vmm_get_vseg_client( cxy_t cxy,
2066	process_t * process, // in
2067	intptr_t vaddr, // in
2068	xptr_t * vseg_xp, // out
2069	error_t * error ) // out
2070	{
2071	#if DEBUG_RPC_VMM_GET_VSEG
2072	thread_t * this = CURRENT_THREAD;
2073	uint32_t cycle = (uint32_t)hal_get_cycles();
2074	if( cycle > DEBUG_RPC_VMM_GET_VSEG )
2075	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
2076	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2077	#endif
2078
2079	uint32_t responses = 1;
2080
2081	// initialise RPC descriptor header
2082	rpc_desc_t rpc;
2083	rpc.index = RPC_VMM_GET_VSEG;
2084	rpc.blocking = true;
2085	rpc.rsp = &responses;
2086
2087	// set input arguments in RPC descriptor
2088	rpc.args[0] = (uint64_t)(intptr_t)process;
2089	rpc.args[1] = (uint64_t)vaddr;
2090
2091	// register RPC request in remote RPC fifo
2092	rpc_send( cxy , &rpc );
2093
2094	// get output argument from rpc descriptor
2095	*vseg_xp = rpc.args[2];
2096	*error = (error_t)rpc.args[3];
2097
2098	#if DEBUG_RPC_VMM_GET_VSEG
2099	cycle = (uint32_t)hal_get_cycles();
2100	if( cycle > DEBUG_RPC_VMM_GET_VSEG )
2101	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
2102	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2103	#endif
2104	}
2105
2106	/////////////////////////////////////////
2107	void rpc_vmm_get_vseg_server( xptr_t xp )
2108	{
2109	#if DEBUG_RPC_VMM_GET_VSEG
2110	thread_t * this = CURRENT_THREAD;
2111	uint32_t cycle = (uint32_t)hal_get_cycles();
2112	if( cycle > DEBUG_RPC_VMM_GET_VSEG )
2113	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
2114	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2115	#endif
2116
2117	process_t * process;
2118	intptr_t vaddr;
2119	vseg_t * vseg_ptr;
2120	xptr_t vseg_xp;
2121	error_t error;
2122
2123	// get client cluster identifier and pointer on RPC descriptor
2124	cxy_t client_cxy = GET_CXY( xp );
2125	rpc_desc_t * desc = GET_PTR( xp );
2126
2127	// get input argument from client RPC descriptor
2128	process = (process_t *)(intptr_t)hal_remote_l64( XPTR( client_cxy , &desc->args[0] ) );
2129	vaddr = (intptr_t)hal_remote_l64( XPTR( client_cxy , &desc->args[1] ) );
2130
2131	// call local kernel function
2132	error = vmm_get_vseg( process , vaddr , &vseg_ptr );
2133
2134	// set output arguments to client RPC descriptor
2135	vseg_xp = XPTR( local_cxy , vseg_ptr );
2136	hal_remote_s64( XPTR( client_cxy , &desc->args[2] ) , (uint64_t)vseg_xp );
2137	hal_remote_s64( XPTR( client_cxy , &desc->args[3] ) , (uint64_t)error );
2138
2139	#if DEBUG_RPC_VMM_GET_VSEG
2140	cycle = (uint32_t)hal_get_cycles();
2141	if( cycle > DEBUG_RPC_VMM_GET_VSEG )
2142	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
2143	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2144	#endif
2145	}
2146
2147
2148	/////////////////////////////////////////////////////////////////////////////////////////
2149	// [21] Marshaling functions attached to RPC_VMM_GLOBAL_UPDATE_PTE
2150	/////////////////////////////////////////////////////////////////////////////////////////
2151
2152	///////////////////////////////////////////////////////
2153	void rpc_vmm_global_update_pte_client( cxy_t cxy,
2154	process_t * process, // in
2155	vpn_t vpn, // in
2156	uint32_t attr, // in
2157	ppn_t ppn ) // in
2158	{
2159	#if DEBUG_RPC_VMM_GLOBAL_UPDATE_PTE
2160	thread_t * this = CURRENT_THREAD;
2161	uint32_t cycle = (uint32_t)hal_get_cycles();
2162	if( cycle > DEBUG_RPC_VMM_GLOBAL_UPDATE_PTE )
2163	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
2164	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2165	#endif
2166
2167	uint32_t responses = 1;
2168
2169	// initialise RPC descriptor header
2170	rpc_desc_t rpc;
2171	rpc.index = RPC_VMM_GLOBAL_UPDATE_PTE;
2172	rpc.blocking = true;
2173	rpc.rsp = &responses;
2174
2175	// set input arguments in RPC descriptor
2176	rpc.args[0] = (uint64_t)(intptr_t)process;
2177	rpc.args[1] = (uint64_t)vpn;
2178	rpc.args[2] = (uint64_t)attr;
2179	rpc.args[3] = (uint64_t)ppn;
2180
2181	// register RPC request in remote RPC fifo
2182	rpc_send( cxy , &rpc );
2183
2184	#if DEBUG_RPC_VMM_GLOBAL_UPDATE_PTE
2185	cycle = (uint32_t)hal_get_cycles();
2186	if( cycle > DEBUG_RPC_VMM_GLOBAL_UPDATE_PTE )
2187	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
2188	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2189	#endif
2190	}
2191
2192	//////////////////////////////////////////////////
2193	void rpc_vmm_global_update_pte_server( xptr_t xp )
2194	{
2195	#if DEBUG_RPC_VMM_GLOBAL_UPDATE_PTE
2196	thread_t * this = CURRENT_THREAD;
2197	uint32_t cycle = (uint32_t)hal_get_cycles();
2198	if( cycle > DEBUG_RPC_VMM_GLOBAL_UPDATE_PTE )
2199	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
2200	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2201	#endif
2202
2203	process_t * process;
2204	vpn_t vpn;
2205	uint32_t attr;
2206	ppn_t ppn;
2207
2208	// get client cluster identifier and pointer on RPC descriptor
2209	cxy_t client_cxy = GET_CXY( xp );
2210	rpc_desc_t * desc = GET_PTR( xp );
2211
2212	// get input argument "process" & "vpn" from client RPC descriptor
2213	process = (process_t *)(intptr_t)hal_remote_l64( XPTR( client_cxy , &desc->args[0] ) );
2214	vpn = (vpn_t) hal_remote_l64( XPTR( client_cxy , &desc->args[1] ) );
2215	attr = (uint32_t) hal_remote_l64( XPTR( client_cxy , &desc->args[2] ) );
2216	ppn = (ppn_t) hal_remote_l64( XPTR( client_cxy , &desc->args[3] ) );
2217
2218	// call local kernel function
2219	vmm_global_update_pte( process , vpn , attr , ppn );
2220
2221	#if DEBUG_RPC_VMM_GLOBAL_UPDATE_PTE
2222	cycle = (uint32_t)hal_get_cycles();
2223	if( cycle > DEBUG_RPC_VMM_GLOBAL_UPDATE_PTE )
2224	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
2225	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2226	#endif
2227	}
2228
2229	/////////////////////////////////////////////////////////////////////////////////////////
2230	// [22] Marshaling functions attached to RPC_KCM_ALLOC
2231	/////////////////////////////////////////////////////////////////////////////////////////
2232
2233	/*
2234	//////////////////////////////////////////
2235	void rpc_kcm_alloc_client( cxy_t cxy,
2236	uint32_t kmem_type, // in
2237	xptr_t * buf_xp ) // out
2238	{
2239	#if DEBUG_RPC_KCM_ALLOC
2240	thread_t * this = CURRENT_THREAD;
2241	uint32_t cycle = (uint32_t)hal_get_cycles();
2242	if( cycle > DEBUG_RPC_KCM_ALLOC )
2243	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
2244	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2245	#endif
2246
2247	uint32_t responses = 1;
2248
2249	// initialise RPC descriptor header
2250	rpc_desc_t rpc;
2251	rpc.index = RPC_KCM_ALLOC;
2252	rpc.blocking = true;
2253	rpc.rsp = &responses;
2254
2255	// set input arguments in RPC descriptor
2256	rpc.args[0] = (uint64_t)kmem_type;
2257
2258	// register RPC request in remote RPC fifo
2259	rpc_send( cxy , &rpc );
2260
2261	// get output arguments from RPC descriptor
2262	*buf_xp = (xptr_t)rpc.args[1];
2263
2264	#if DEBUG_RPC_KCM_ALLOC
2265	cycle = (uint32_t)hal_get_cycles();
2266	if( cycle > DEBUG_RPC_KCM_ALLOC )
2267	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
2268	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2269	#endif
2270	}
2271
2272	//////////////////////////////////////
2273	void rpc_kcm_alloc_server( xptr_t xp )
2274	{
2275	#if DEBUG_RPC_KCM_ALLOC
2276	thread_t * this = CURRENT_THREAD;
2277	uint32_t cycle = (uint32_t)hal_get_cycles();
2278	if( cycle > DEBUG_RPC_KCM_ALLOC )
2279	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
2280	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2281	#endif
2282
2283	// get client cluster identifier and pointer on RPC descriptor
2284	cxy_t client_cxy = GET_CXY( xp );
2285	rpc_desc_t * desc = GET_PTR( xp );
2286
2287	// get input argument "kmem_type" from client RPC descriptor
2288	uint32_t kmem_type = (uint32_t)hal_remote_l64( XPTR( client_cxy , &desc->args[0] ) );
2289
2290	// allocates memory for kcm
2291	kmem_req_t req;
2292	req.type = kmem_type;
2293	req.flags = AF_ZERO;
2294	void * buf_ptr = kmem_alloc( &req );
2295
2296	// set output argument
2297	xptr_t buf_xp = XPTR( local_cxy , buf_ptr );
2298	hal_remote_s64( XPTR( client_cxy , &desc->args[1] ) , (uint64_t)buf_xp );
2299
2300	#if DEBUG_RPC_KCM_ALLOC
2301	cycle = (uint32_t)hal_get_cycles();
2302	if( cycle > DEBUG_RPC_KCM_ALLOC )
2303	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
2304	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2305	#endif
2306	}
2307	*/
2308
2309	/////////////////////////////////////////////////////////////////////////////////////////
2310	// [23] Marshaling functions attached to RPC_KCM_FREE
2311	/////////////////////////////////////////////////////////////////////////////////////////
2312
2313	/*
2314	/////////////////////////////////////////
2315	void rpc_kcm_free_client( cxy_t cxy,
2316	void * buf, // in
2317	uint32_t kmem_type ) // in
2318	{
2319	#if DEBUG_RPC_KCM_FREE
2320	thread_t * this = CURRENT_THREAD;
2321	uint32_t cycle = (uint32_t)hal_get_cycles();
2322	if( cycle > DEBUG_RPC_KCM_FREE )
2323	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
2324	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2325	#endif
2326
2327	uint32_t responses = 1;
2328
2329	// initialise RPC descriptor header
2330	rpc_desc_t rpc;
2331	rpc.index = RPC_KCM_FREE;
2332	rpc.blocking = true;
2333	rpc.rsp = &responses;
2334
2335	// set input arguments in RPC descriptor
2336	rpc.args[0] = (uint64_t)(intptr_t)buf;
2337	rpc.args[1] = (uint64_t)kmem_type;
2338
2339	// register RPC request in remote RPC fifo
2340	rpc_send( cxy , &rpc );
2341
2342	#if DEBUG_RPC_KCM_FREE
2343	cycle = (uint32_t)hal_get_cycles();
2344	if( cycle > DEBUG_RPC_KCM_FREE )
2345	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
2346	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2347	#endif
2348	}
2349
2350	/////////////////////////////////////
2351	void rpc_kcm_free_server( xptr_t xp )
2352	{
2353	#if DEBUG_RPC_KCM_FREE
2354	thread_t * this = CURRENT_THREAD;
2355	uint32_t cycle = (uint32_t)hal_get_cycles();
2356	if( cycle > DEBUG_RPC_KCM_FREE )
2357	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
2358	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2359	#endif
2360
2361	// get client cluster identifier and pointer on RPC descriptor
2362	cxy_t client_cxy = GET_CXY( xp );
2363	rpc_desc_t * desc = GET_PTR( xp );
2364
2365	// get input arguments "buf" and "kmem_type" from client RPC descriptor
2366	void * buf = (void *)(intptr_t)hal_remote_l64( XPTR( client_cxy , &desc->args[0] ) );
2367	uint32_t kmem_type = (uint32_t)hal_remote_l64( XPTR( client_cxy , &desc->args[1] ) );
2368
2369	// releases memory
2370	kmem_req_t req;
2371	req.type = kmem_type;
2372	req.ptr = buf;
2373	kmem_free( &req );
2374
2375	#if DEBUG_RPC_KCM_FREE
2376	cycle = (uint32_t)hal_get_cycles();
2377	if( cycle > DEBUG_RPC_KCM_FREE )
2378	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
2379	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2380	#endif
2381	}
2382	*/
2383
2384	/////////////////////////////////////////////////////////////////////////////////////////
2385	// [24] Marshaling functions attached to RPC_MAPPER_SYNC
2386	/////////////////////////////////////////////////////////////////////////////////////////
2387
2388	///////////////////////////////////////////////////
2389	void rpc_mapper_sync_client( cxy_t cxy,
2390	struct mapper_s * mapper,
2391	error_t * error )
2392	{
2393	#if DEBUG_RPC_MAPPER_SYNC
2394	thread_t * this = CURRENT_THREAD;
2395	uint32_t cycle = (uint32_t)hal_get_cycles();
2396	if( cycle > DEBUG_RPC_MAPPER_SYNC )
2397	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
2398	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2399	#endif
2400
2401	uint32_t responses = 1;
2402
2403	// initialise RPC descriptor header
2404	rpc_desc_t rpc;
2405	rpc.index = RPC_MAPPER_SYNC;
2406	rpc.blocking = true;
2407	rpc.rsp = &responses;
2408
2409	// set input arguments in RPC descriptor
2410	rpc.args[0] = (uint64_t)(intptr_t)mapper;
2411
2412	// register RPC request in remote RPC fifo
2413	rpc_send( cxy , &rpc );
2414
2415	// get output values from RPC descriptor
2416	*error = (error_t)rpc.args[1];
2417
2418	#if DEBUG_RPC_MAPPER_SYNC
2419	cycle = (uint32_t)hal_get_cycles();
2420	if( cycle > DEBUG_RPC_MAPPER_SYNC )
2421	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
2422	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2423	#endif
2424	}
2425
2426	////////////////////////////////////////
2427	void rpc_mapper_sync_server( xptr_t xp )
2428	{
2429	#if DEBUG_RPC_MAPPER_SYNC
2430	thread_t * this = CURRENT_THREAD;
2431	uint32_t cycle = (uint32_t)hal_get_cycles();
2432	if( cycle > DEBUG_RPC_MAPPER_SYNC )
2433	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
2434	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2435	#endif
2436
2437	mapper_t * mapper;
2438	error_t error;
2439
2440	// get client cluster identifier and pointer on RPC descriptor
2441	cxy_t client_cxy = GET_CXY( xp );
2442	rpc_desc_t * desc = GET_PTR( xp );
2443
2444	// get arguments from client RPC descriptor
2445	mapper = (mapper_t *)(intptr_t)hal_remote_l64( XPTR( client_cxy , &desc->args[0] ) );
2446
2447	// call local kernel function
2448	error = mapper_sync( mapper );
2449
2450	// set output argument to client RPC descriptor
2451	hal_remote_s64( XPTR( client_cxy , &desc->args[1] ) , (uint64_t)error );
2452
2453	#if DEBUG_RPC_MAPPER_SYNC
2454	cycle = (uint32_t)hal_get_cycles();
2455	if( cycle > DEBUG_RPC_MAPPER_SYNC )
2456	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
2457	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2458	#endif
2459	}
2460
2461	/////////////////////////////////////////////////////////////////////////////////////////
2462	// [25] Marshaling functions attached to RPC_MAPPER_HANDLE_MISS
2463	/////////////////////////////////////////////////////////////////////////////////////////
2464
2465	/*
2466	//////////////////////////////////////////////////////////
2467	void rpc_mapper_handle_miss_client( cxy_t cxy,
2468	struct mapper_s * mapper,
2469	uint32_t page_id,
2470	xptr_t * page_xp,
2471	error_t * error )
2472	{
2473	#if DEBUG_RPC_MAPPER_HANDLE_MISS
2474	thread_t * this = CURRENT_THREAD;
2475	uint32_t cycle = (uint32_t)hal_get_cycles();
2476	if( cycle > DEBUG_RPC_MAPPER_HANDLE_MISS )
2477	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
2478	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2479	#endif
2480
2481	uint32_t responses = 1;
2482
2483	// initialise RPC descriptor header
2484	rpc_desc_t rpc;
2485	rpc.index = RPC_MAPPER_HANDLE_MISS;
2486	rpc.blocking = true;
2487	rpc.rsp = &responses;
2488
2489	// set input arguments in RPC descriptor
2490	rpc.args[0] = (uint64_t)(intptr_t)mapper;
2491	rpc.args[1] = (uint64_t)page_id;
2492
2493	// register RPC request in remote RPC fifo
2494	rpc_send( cxy , &rpc );
2495
2496	// get output values from RPC descriptor
2497	*page_xp = (xptr_t)rpc.args[2];
2498	*error = (error_t)rpc.args[3];
2499
2500	#if DEBUG_RPC_MAPPER_HANDLE_MISS
2501	cycle = (uint32_t)hal_get_cycles();
2502	if( cycle > DEBUG_RPC_MAPPER_HANDLE_MISS )
2503	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
2504	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2505	#endif
2506	}
2507
2508	///////////////////////////////////////////////
2509	void rpc_mapper_handle_miss_server( xptr_t xp )
2510	{
2511	#if DEBUG_RPC_MAPPER_HANDLE_MISS
2512	thread_t * this = CURRENT_THREAD;
2513	uint32_t cycle = (uint32_t)hal_get_cycles();
2514	if( cycle > DEBUG_RPC_MAPPER_HANDLE_MISS )
2515	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
2516	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2517	#endif
2518
2519	mapper_t * mapper;
2520	uint32_t page_id;
2521	xptr_t page_xp;
2522	error_t error;
2523
2524	// get client cluster identifier and pointer on RPC descriptor
2525	cxy_t client_cxy = GET_CXY( xp );
2526	rpc_desc_t * desc = GET_PTR( xp );
2527
2528	// get arguments from client RPC descriptor
2529	mapper = (mapper_t *)(intptr_t)hal_remote_l64( XPTR( client_cxy , &desc->args[0] ) );
2530	page_id = hal_remote_l64( XPTR( client_cxy , &desc->args[1] ) );
2531
2532	// call local kernel function
2533	error = mapper_handle_miss( mapper,
2534	page_id,
2535	&page_xp );
2536
2537	// set output argument to client RPC descriptor
2538	hal_remote_s64( XPTR( client_cxy , &desc->args[2] ) , (uint64_t)page_xp );
2539	hal_remote_s64( XPTR( client_cxy , &desc->args[3] ) , (uint64_t)error );
2540
2541	#if DEBUG_RPC_MAPPER_HANDLE_MISS
2542	cycle = (uint32_t)hal_get_cycles();
2543	if( cycle > DEBUG_RPC_MAPPER_HANDLE_MISS )
2544	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
2545	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2546	#endif
2547	}
2548	*/
2549
2550	/////////////////////////////////////////////////////////////////////////////////////////
2551	// [26] Marshaling functions attached to RPC_VMM_DELETE_VSEG
2552	/////////////////////////////////////////////////////////////////////////////////////////
2553
2554	//////////////////////////////////////////////////
2555	void rpc_vmm_delete_vseg_client( cxy_t cxy,
2556	pid_t pid,
2557	intptr_t vaddr )
2558	{
2559	#if DEBUG_RPC_VMM_DELETE_VSEG
2560	thread_t * this = CURRENT_THREAD;
2561	uint32_t cycle = (uint32_t)hal_get_cycles();
2562	if( cycle > DEBUG_RPC_VMM_DELETE_VSEG )
2563	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
2564	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
2565	#endif
2566
2567	uint32_t responses = 1;
2568	rpc_desc_t rpc;
2569
2570	// initialise RPC descriptor header
2571	rpc.index = RPC_VMM_DELETE_VSEG;
2572	rpc.blocking = true;
2573	rpc.rsp = &responses;
2574
2575	// set input arguments in RPC descriptor
2576	rpc.args[0] = (uint64_t)pid;
2577	rpc.args[1] = (uint64_t)vaddr;
2578
2579	// register RPC request in remote RPC fifo
2580	rpc_send( cxy , &rpc );
2581
2582	#if DEBUG_RPC_VMM_DELETE_VSEG
2583	cycle = (uint32_t)hal_get_cycles();
2584	if( cycle > DEBUG_RPC_VMM_DELETE_VSEG )
2585	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
2586	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
2587	#endif
2588	}
2589
2590	////////////////////////////////////////////
2591	void rpc_vmm_delete_vseg_server( xptr_t xp )
2592	{
2593	#if DEBUG_RPC_VMM_DELETE_VSEG
2594	uint32_t cycle = (uint32_t)hal_get_cycles();
2595	thread_t * this = CURRENT_THREAD;
2596	if( DEBUG_RPC_VMM_DELETE_VSEG < cycle )
2597	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
2598	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
2599	#endif
2600
2601	// get client cluster identifier and pointer on RPC descriptor
2602	cxy_t client_cxy = GET_CXY( xp );
2603	rpc_desc_t * desc = GET_PTR( xp );
2604
2605	// get arguments from RPC descriptor
2606	pid_t pid = (pid_t) hal_remote_l64( XPTR(client_cxy , &desc->args[0]) );
2607	intptr_t vaddr = (intptr_t)hal_remote_l64( XPTR(client_cxy , &desc->args[1]) );
2608
2609	// call relevant kernel function
2610	vmm_delete_vseg( pid , vaddr );
2611
2612	#if DEBUG_RPC_VMM_DELETE_VSEG
2613	cycle = (uint32_t)hal_get_cycles();
2614	if( DEBUG_RPC_VMM_DELETE_VSEG < cycle )
2615	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
2616	__FUNCTION__, this->process->pid, this->trdid, this->core->lid, cycle );
2617	#endif
2618	}
2619
2620	/////////////////////////////////////////////////////////////////////////////////////////
2621	// [27] Marshaling functions attached to RPC_VMM_CREATE_VSEG
2622	/////////////////////////////////////////////////////////////////////////////////////////
2623
2624	////////////////////////////////////////////////////////
2625	void rpc_vmm_create_vseg_client( cxy_t cxy,
2626	struct process_s * process,
2627	vseg_type_t type,
2628	intptr_t base,
2629	uint32_t size,
2630	uint32_t file_offset,
2631	uint32_t file_size,
2632	xptr_t mapper_xp,
2633	cxy_t vseg_cxy,
2634	struct vseg_s ** vseg )
2635	{
2636	#if DEBUG_RPC_VMM_CREATE_VSEG
2637	thread_t * this = CURRENT_THREAD;
2638	uint32_t cycle = (uint32_t)hal_get_cycles();
2639	if( cycle > DEBUG_RPC_VMM_CREATE_VSEG )
2640	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
2641	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2642	#endif
2643
2644	uint32_t responses = 1;
2645
2646	// initialise RPC descriptor header
2647	rpc_desc_t rpc;
2648	rpc.index = RPC_VMM_CREATE_VSEG;
2649	rpc.blocking = true;
2650	rpc.rsp = &responses;
2651
2652	// set input arguments in RPC descriptor
2653	rpc.args[0] = (uint64_t)(intptr_t)process;
2654	rpc.args[1] = (uint64_t)type;
2655	rpc.args[2] = (uint64_t)base;
2656	rpc.args[3] = (uint64_t)size;
2657	rpc.args[4] = (uint64_t)file_offset;
2658	rpc.args[5] = (uint64_t)file_size;
2659	rpc.args[6] = (uint64_t)mapper_xp;
2660	rpc.args[7] = (uint64_t)vseg_cxy;
2661
2662	// register RPC request in remote RPC fifo
2663	rpc_send( cxy , &rpc );
2664
2665	// get output values from RPC descriptor
2666	vseg = (vseg_t )(intptr_t)rpc.args[8];
2667
2668	#if DEBUG_RPC_VMM_CREATE_VSEG
2669	cycle = (uint32_t)hal_get_cycles();
2670	if( cycle > DEBUG_RPC_VMM_CREATE_VSEG )
2671	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
2672	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2673	#endif
2674	}
2675
2676	////////////////////////////////////////////
2677	void rpc_vmm_create_vseg_server( xptr_t xp )
2678	{
2679	#if DEBUG_RPC_VMM_CREATE_VSEG
2680	thread_t * this = CURRENT_THREAD;
2681	uint32_t cycle = (uint32_t)hal_get_cycles();
2682	if( cycle > DEBUG_RPC_VMM_CREATE_VSEG )
2683	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
2684	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2685	#endif
2686
2687	// get client cluster identifier and pointer on RPC descriptor
2688	cxy_t cxy = GET_CXY( xp );
2689	rpc_desc_t * desc = GET_PTR( xp );
2690
2691	// get input arguments from client RPC descriptor
2692	process_t * process = (process_t *)(intptr_t)hal_remote_l64( XPTR(cxy , &desc->args[0]));
2693	vseg_type_t type = (vseg_type_t)(uint32_t)hal_remote_l64( XPTR(cxy , &desc->args[1]));
2694	intptr_t base = (intptr_t) hal_remote_l64( XPTR(cxy , &desc->args[2]));
2695	uint32_t size = (uint32_t) hal_remote_l64( XPTR(cxy , &desc->args[3]));
2696	uint32_t file_offset = (uint32_t) hal_remote_l64( XPTR(cxy , &desc->args[4]));
2697	uint32_t file_size = (uint32_t) hal_remote_l64( XPTR(cxy , &desc->args[5]));
2698	xptr_t mapper_xp = (xptr_t) hal_remote_l64( XPTR(cxy , &desc->args[6]));
2699	cxy_t vseg_cxy = (cxy_t)(uint32_t) hal_remote_l64( XPTR(cxy , &desc->args[7]));
2700
2701	// call local kernel function
2702	vseg_t * vseg = vmm_create_vseg( process,
2703	type,
2704	base,
2705	size,
2706	file_offset,
2707	file_size,
2708	mapper_xp,
2709	vseg_cxy );
2710
2711	// set output arguments into client RPC descriptor
2712	hal_remote_s64( XPTR( cxy , &desc->args[8] ) , (uint64_t)(intptr_t)vseg );
2713
2714	#if DEBUG_RPC_VMM_CREATE_VSEG
2715	cycle = (uint32_t)hal_get_cycles();
2716	if( cycle > DEBUG_RPC_VMM_CREATE_VSEG )
2717	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
2718	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2719	#endif
2720	}
2721
2722	/////////////////////////////////////////////////////////////////////////////////////////
2723	// [28] Marshaling functions attached to RPC_VMM_SET_COW
2724	/////////////////////////////////////////////////////////////////////////////////////////
2725
2726	/////////////////////////////////////////////
2727	void rpc_vmm_set_cow_client( cxy_t cxy,
2728	process_t * process )
2729	{
2730	#if DEBUG_RPC_VMM_SET_COW
2731	thread_t * this = CURRENT_THREAD;
2732	uint32_t cycle = (uint32_t)hal_get_cycles();
2733	if( cycle > DEBUG_RPC_VMM_SET_COW )
2734	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
2735	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2736	#endif
2737
2738	uint32_t responses = 1;
2739
2740	// initialise RPC descriptor header
2741	rpc_desc_t rpc;
2742	rpc.index = RPC_VMM_SET_COW;
2743	rpc.blocking = true;
2744	rpc.rsp = &responses;
2745
2746	// set input arguments in RPC descriptor
2747	rpc.args[0] = (uint64_t)(intptr_t)process;
2748
2749	// register RPC request in remote RPC fifo
2750	rpc_send( cxy , &rpc );
2751
2752	#if DEBUG_RPC_VMM_SET_COW
2753	cycle = (uint32_t)hal_get_cycles();
2754	if( cycle > DEBUG_RPC_VMM_SET_COW )
2755	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
2756	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2757	#endif
2758	}
2759
2760	////////////////////////////////////////
2761	void rpc_vmm_set_cow_server( xptr_t xp )
2762	{
2763	#if DEBUG_RPC_VMM_SET_COW
2764	thread_t * this = CURRENT_THREAD;
2765	uint32_t cycle = (uint32_t)hal_get_cycles();
2766	if( cycle > DEBUG_RPC_VMM_SET_COW )
2767	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
2768	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2769	#endif
2770
2771	process_t * process;
2772
2773	// get client cluster identifier and pointer on RPC descriptor
2774	cxy_t cxy = GET_CXY( xp );
2775	rpc_desc_t * desc = GET_PTR( xp );
2776
2777	// get input arguments from client RPC descriptor
2778	process = (process_t *)(intptr_t)hal_remote_l64( XPTR(cxy , &desc->args[0]));
2779
2780	// call local kernel function
2781	vmm_set_cow( process );
2782
2783	#if DEBUG_RPC_VMM_SET_COW
2784	cycle = (uint32_t)hal_get_cycles();
2785	if( cycle > DEBUG_RPC_VMM_SET_COW )
2786	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
2787	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2788	#endif
2789	}
2790
2791	/////////////////////////////////////////////////////////////////////////////////////////
2792	// [29] RPC_VMM_DISPLAY deprecated [AG] June 2019
2793	/////////////////////////////////////////////////////////////////////////////////////////
2794
2795	/*
2796	/////////////////////////////////////////////
2797	void rpc_hal_vmm_display_client( cxy_t cxy,
2798	process_t * process,
2799	bool_t detailed )
2800	{
2801	#if DEBUG_RPC_VMM_DISPLAY
2802	thread_t * this = CURRENT_THREAD;
2803	uint32_t cycle = (uint32_t)hal_get_cycles();
2804	if( cycle > DEBUG_RPC_VMM_DISPLAY )
2805	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
2806	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2807	#endif
2808
2809	uint32_t responses = 1;
2810
2811	// initialise RPC descriptor header
2812	rpc_desc_t rpc;
2813	rpc.index = RPC_VMM_DISPLAY;
2814	rpc.blocking = true;
2815	rpc.rsp = &responses;
2816
2817	// set input arguments in RPC descriptor
2818	rpc.args[0] = (uint64_t)(intptr_t)process;
2819	rpc.args[1] = (uint64_t)detailed;
2820
2821	// register RPC request in remote RPC fifo
2822	rpc_send( cxy , &rpc );
2823
2824	#if DEBUG_RPC_VMM_DISPLAY
2825	cycle = (uint32_t)hal_get_cycles();
2826	if( cycle > DEBUG_RPC_VMM_DISPLAY )
2827	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
2828	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2829	#endif
2830	}
2831
2832	////////////////////////////////////////
2833	void rpc_hal_vmm_display_server( xptr_t xp )
2834	{
2835	#if DEBUG_RPC_VMM_DISPLAY
2836	thread_t * this = CURRENT_THREAD;
2837	uint32_t cycle = (uint32_t)hal_get_cycles();
2838	if( cycle > DEBUG_RPC_VMM_DISPLAY )
2839	printk("\n[%s] thread[%x,%x] on core %d enter / cycle %d\n",
2840	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2841	#endif
2842
2843	process_t * process;
2844	bool_t detailed;
2845
2846	// get client cluster identifier and pointer on RPC descriptor
2847	cxy_t cxy = GET_CXY( xp );
2848	rpc_desc_t * desc = GET_PTR( xp );
2849
2850	// get input arguments from client RPC descriptor
2851	process = (process_t *)(intptr_t)hal_remote_l64( XPTR(cxy , &desc->args[0]));
2852	detailed = (bool_t) hal_remote_l64( XPTR(cxy , &desc->args[1]));
2853
2854	// call local kernel function
2855	hal_vmm_display( process , detailed );
2856
2857	#if DEBUG_RPC_VMM_DISPLAY
2858	cycle = (uint32_t)hal_get_cycles();
2859	if( cycle > DEBUG_RPC_VMM_DISPLAY )
2860	printk("\n[%s] thread[%x,%x] on core %d exit / cycle %d\n",
2861	__FUNCTION__, this->process->pid, this->trdid, this->core->lid , cycle );
2862	#endif
2863	}
2864
2865	*/

Note: See TracBrowser for help on using the repository browser.

Download in other formats: