source: trunk/kernel/syscalls/sys_read.c @ 653

Last change on this file since 653 was 635, checked in by alain, 5 years ago

This version is a major evolution: The physical memory allocators,
defined in the kmem.c, ppm.c, and kcm.c files have been modified
to support remote accesses. The RPCs that were previously user
to allocate physical memory in a remote cluster have been removed.
This has been done to cure a dead-lock in case of concurrent page-faults.

This version 2.2 has been tested on a (4 clusters / 2 cores per cluster)
TSAR architecture, for both the "sort" and the "fft" applications.

File size: 9.3 KB
RevLine 
[1]1/*
[625]2 * sys_read.c - Kernel function implementing the "read" system call.
[1]3 *
[625]4 * Author     Alain Greiner (2016,2017,2018,2019)
[1]5 *
[23]6 * Copyright (c) UPMC Sorbonne Universites
[1]7 *
[23]8 * This file is part of ALMOS-MKH.
9 *
10 * ALMOS-MKH is free software; you can redistribute it and/or modify it
[1]11 * under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; version 2.0 of the License.
13 *
[23]14 * ALMOS-MKH is distributed in the hope that it will be useful, but
[1]15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
17 * General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
[23]20 * along with ALMOS-MKH; if not, write to the Free Software Foundation,
[1]21 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22 */
23
[23]24#include <kernel_config.h>
[457]25#include <hal_kernel_types.h>
[625]26#include <hal_vmm.h>
[23]27#include <hal_uspace.h>
[409]28#include <hal_irqmask.h>
[23]29#include <hal_special.h>
[1]30#include <errno.h>
[23]31#include <vfs.h>
32#include <vmm.h>
[1]33#include <thread.h>
[23]34#include <printk.h>
35#include <process.h>
[1]36
[506]37
[407]38extern uint32_t enter_sys_read;
[436]39extern uint32_t enter_devfs_read;
[407]40extern uint32_t enter_txt_read;
[436]41extern uint32_t enter_chdev_cmd_read;
42extern uint32_t enter_chdev_server_read;
43extern uint32_t enter_tty_cmd_read;
44extern uint32_t enter_tty_isr_read;
45extern uint32_t exit_tty_isr_read;
46extern uint32_t exit_tty_cmd_read;
47extern uint32_t exit_chdev_server_read;
48extern uint32_t exit_chdev_cmd_read;
[407]49extern uint32_t exit_txt_read;
[436]50extern uint32_t exit_devfs_read;
[407]51extern uint32_t exit_sys_read;
52
53
[23]54/////////////////////////////////
55int sys_read( uint32_t   file_id,
[407]56              void     * vaddr,
[23]57              uint32_t   count )
[1]58{
[604]59    error_t       error;
60    vseg_t      * vseg;            // required for user space checking
[633]61    xptr_t        file_xp;         // remote file extended pointer
[604]62    vfs_file_t  * file_ptr;        // remote file local pointer
63    cxy_t         file_cxy;        // remote file cluster identifier
64    uint32_t      file_type;       // file type
65    uint32_t      file_attr;       // file_attribute
66    uint32_t      nbytes;          // number of bytes actually read
67    reg_t         save_sr;         // required to enable IRQs during syscall
[407]68
[604]69        thread_t    * this             = CURRENT_THREAD;
70        process_t   * process          = this->process;
71    xptr_t        process_owner_xp = process->owner_xp;
[23]72 
[566]73#if (DEBUG_SYS_READ || CONFIG_INSTRUMENTATION_SYSCALLS)
74uint64_t     tm_start = hal_get_cycles();
75#endif
76
[438]77#if DEBUG_SYS_READ
78if( DEBUG_SYS_READ < tm_start )
[610]79printk("\n[%s] thread[%x,%x] enter / vaddr %x / count %d / cycle %d\n",
[584]80__FUNCTION__, process->pid, this->trdid, vaddr, count, (uint32_t)tm_start );
[433]81#endif
82
[438]83#if (DEBUG_SYS_READ & 1)
[436]84enter_sys_read = (uint32_t)tm_start;
85#endif
86
[23]87    // check file_id argument
88        if( file_id >= CONFIG_PROCESS_FILE_MAX_NR )
[1]89        {
[435]90
[438]91#if DEBUG_SYSCALLS_ERROR
[604]92printk("\n[ERROR] in %s : thread[%x,%x] illegal file descriptor index %d\n",
[584]93__FUNCTION__ , process->pid, this->trdid, file_id );
[435]94#endif
[23]95                this->errno = EBADFD;
[1]96                return -1;
97        }
98
[23]99    // check user buffer in user space
[440]100    error = vmm_get_vseg( process , (intptr_t)vaddr , &vseg );
[23]101
102    if ( error )
103    {
[435]104
[438]105#if DEBUG_SYSCALLS_ERROR
[584]106printk("\n[ERROR] in %s : thread[%x,%x] user buffer unmapped %x\n",
107__FUNCTION__ , process->pid, this->trdid, (intptr_t)vaddr );
[435]108#endif
[23]109                this->errno = EINVAL;
110                return -1;
111    }
112
113    // get extended pointer on remote file descriptor
114    file_xp = process_fd_get_xptr( process , file_id );
115
116    if( file_xp == XPTR_NULL )
117    {
[435]118
[438]119#if DEBUG_SYSCALLS_ERROR
[584]120printk("\n[ERROR] in %s : thread[%x,%x] undefined fd_id %d\n",
121__FUNCTION__, process->pid, this->trdid, file_id );
[435]122#endif
[23]123        this->errno = EBADFD;
124        return -1;
125    }
126
127    // get file descriptor cluster and local pointer
[604]128    file_ptr = GET_PTR( file_xp );
129    file_cxy = GET_CXY( file_xp );
[23]130
[633]131    // get file type and attributes
[604]132    file_type   = hal_remote_l32( XPTR( file_cxy , &file_ptr->type ) );
133    file_attr   = hal_remote_l32( XPTR( file_cxy , &file_ptr->attr ) );
[313]134
[604]135    // enable IRQs
136    hal_enable_irq( &save_sr );
137
[407]138    // action depend on file type
[604]139    if( file_type == INODE_TYPE_FILE )      // read from file mapper
[23]140    {
[421]141        // check file readable
[604]142        if( (file_attr & FD_ATTR_READ_ENABLE) == 0 )
[421]143            {
[435]144
[438]145#if DEBUG_SYSCALLS_ERROR
[584]146printk("\n[ERROR] in %s : thread[%x,%x] file %d not readable\n",
147__FUNCTION__, process->pid, this->trdid, file_id );
[435]148#endif
[604]149            hal_restore_irq( save_sr );
[421]150                    this->errno = EBADFD;
151                    return -1;
152            }
153
154        // move count bytes from mapper
[407]155        nbytes = vfs_user_move( true,               // from mapper to buffer
156                                file_xp,
157                                vaddr, 
158                                count );
[604]159        if( nbytes != count )
160        {
161
162#if DEBUG_SYSCALLS_ERROR
163printk("\n[ERROR] in %s : thread[%x,‰x] cannot read %d bytes from file %d\n",
164__FUNCTION__, process->pid, this->trdid, count, file_id );
165#endif
166            this->errno = EIO;
167            hal_restore_irq( save_sr );
168            return -1;
169        }
[407]170    }
[604]171    else if( file_type == INODE_TYPE_DEV )  // read from TXT device
[407]172    {
[436]173        // get cluster and pointers on TXT_RX chdev
174        xptr_t    chdev_xp  = chdev_from_file( file_xp );
175        cxy_t     chdev_cxy = GET_CXY( chdev_xp );
176        chdev_t * chdev_ptr = GET_PTR( chdev_xp );
177
[446]178        volatile xptr_t    txt_owner_xp;   
179        uint32_t           iter = 0;
[436]180
181        while( 1 )
182        {
[446]183            // extended pointer on TXT owner process
[566]184            txt_owner_xp  = hal_remote_l64( XPTR( chdev_cxy , &chdev_ptr->ext.txt.owner_xp ) );
[436]185
186            // check TXT_RX ownership
[446]187            if ( process_owner_xp != txt_owner_xp )
[436]188            {
[446]189                if( (iter & 0xFFF) == 0 )
[584]190                printk("\n[WARNING] in %s : thread[%x,%x] wait TXT_RX / cycle %d\n",
191                __FUNCTION__, process->pid, this->trdid, (uint32_t)hal_get_cycles() );
[446]192
[436]193                // deschedule without blocking
[446]194                sched_yield( "wait TXT_RX ownership" );
195
196                iter++;
[436]197            }
198            else
199            {
200                break;
201            }
202        }
203
[421]204        // move count bytes from device
[407]205        nbytes = devfs_user_move( true,             // from device to buffer
206                                  file_xp,
207                                  vaddr,
208                                  count );
[604]209        if( nbytes != count )
210        {
[421]211
[604]212#if DEBUG_SYSCALLS_ERROR
213printk("\n[ERROR] in %s : thread[%x,‰x] cannot read data from file %d\n",
214__FUNCTION__, process->pid, this->trdid, file_id );
215#endif
216            this->errno = EIO;
217            hal_restore_irq( save_sr );
218            return -1;
219        }
[407]220    }
[594]221    else    // not FILE and not DEV
[407]222    {
[594]223
224#if DEBUG_SYSCALLS_ERROR
225printk("\n[ERROR] in %s : thread[%x,%x] / illegal inode type %\n",
[604]226__FUNCTION__, vfs_inode_type_str( file_type ) );
[594]227#endif
228                this->errno = EBADFD;
[604]229        hal_restore_irq( save_sr );
[594]230                return -1;
[407]231    }
232
[408]233    // restore IRQs
[421]234    hal_restore_irq( save_sr );
[408]235
[124]236    hal_fence();
[23]237
[566]238#if (DEBUG_SYS_READ || CONFIG_INSTRUMENTATION_SYSCALLS)
239uint64_t     tm_end = hal_get_cycles();
240#endif
241
[438]242#if DEBUG_SYS_READ
243if( DEBUG_SYS_READ < tm_end )
[610]244printk("\n[%s] thread[%x,%x] exit / cycle %d\n",
[584]245__FUNCTION__ , process->pid, this->trdid, (uint32_t)tm_end );
[409]246#endif
[23]247
[566]248#if CONFIG_INSTRUMENTATION_SYSCALLS
249hal_atomic_add( &syscalls_cumul_cost[SYS_READ] , tm_end - tm_start );
250hal_atomic_add( &syscalls_occurences[SYS_READ] , 1 );
251#endif
252
[438]253#if (DEBUG_SYS_READ & 1)
[418]254exit_sys_read = (uint32_t)tm_end;
[407]255
[443]256printk("\n***** timing to read one character *****\n"
[435]257" - enter_sys_read          = %d / delta %d\n"
258" - enter_devfs_read        = %d / delta %d\n"
259" - enter_txt_read          = %d / delta %d\n"
260" - enter_chdev_cmd_read    = %d / delta %d\n"
261" - enter_chdev_server_read = %d / delta %d\n"
262" - enter_tty_cmd_read      = %d / delta %d\n"
263" - enter_tty_isr_read      = %d / delta %d\n"
264" - exit_tty_isr_read       = %d / delta %d\n"
265" - exit_tty_cmd_read       = %d / delta %d\n"
266" - exit_chdev_server_read  = %d / delta %d\n"
267" - exit_chdev_cmd_read     = %d / delta %d\n"
268" - exit_txt_read           = %d / delta %d\n"
269" - exit_devfs_read         = %d / delta %d\n"
270" - exit_sys_read           = %d / delta %d\n",
271enter_sys_read          , 0 ,
272enter_devfs_read        , enter_devfs_read        - enter_sys_read          ,
273enter_txt_read          , enter_txt_read          - enter_devfs_read        ,
274enter_chdev_cmd_read    , enter_chdev_cmd_read    - enter_txt_read          ,
275enter_chdev_server_read , enter_chdev_server_read - enter_chdev_cmd_read    ,
276enter_tty_cmd_read      , enter_tty_cmd_read      - enter_chdev_server_read ,
277enter_tty_isr_read      , enter_tty_isr_read      - enter_tty_cmd_read      ,
278exit_tty_isr_read       , exit_tty_isr_read       - enter_tty_isr_read      ,
279exit_tty_cmd_read       , exit_tty_cmd_read       - exit_tty_isr_read       ,
280exit_chdev_server_read  , exit_chdev_server_read  - exit_tty_cmd_read       ,
281exit_chdev_cmd_read     , exit_chdev_cmd_read     - exit_chdev_server_read  ,
282exit_txt_read           , exit_txt_read           - exit_chdev_cmd_read     ,
283exit_devfs_read         , exit_devfs_read         - exit_txt_read           ,
284exit_sys_read           , exit_sys_read           - exit_devfs_read         );
[407]285#endif
286 
287        return nbytes;
288
[23]289}  // end sys_read()
Note: See TracBrowser for help on using the repository browser.