Context Navigation

source: trunk/kernel/syscalls/syscalls.h @ 166

Last change on this file since 166 was 50, checked in by alain, 7 years ago
bloup
File size: 32.3 KB

Rev	Line
[1]	1	/*
[16]	2	* syscalls.h - kernel services definition
[1]	3	*
[23]	4	* Author Alain Greiner (2016,2017)
[1]	5	*
	6	* Copyright (c) UPMC Sorbonne Universites
	7	*
	8	* This file is part of ALMOS-MKH.
	9	*
	10	* ALMOS-MKH is free software; you can redistribute it and/or modify it
	11	* under the terms of the GNU General Public License as published by
	12	* the Free Software Foundation; version 2.0 of the License.
	13	*
	14	* ALMOS-MKH is distributed in the hope that it will be useful, but
	15	* WITHOUT ANY WARRANTY; without even the implied warranty of
	16	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
	17	* General Public License for more details.
	18	*
	19	* You should have received a copy of the GNU General Public License
	20	* along with ALMOS-MKH; if not, write to the Free Software Foundation,
	21	* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
	22	*/
	23
[16]	24	#ifndef _SYSCALLS_H_
	25	#define _SYSCALLS_H_
[1]	26
[23]	27	#include <hal_types.h>
	28	#include <time.h>
	29
	30	/*** Forward declarations ***/
	31
	32	struct thread_s; // defined in thread.h
	33	struct pthread_attr_s; // defined in thread.h
	34	struct vfs_stat_s; // defined in vfs.h
	35	struct vfs_dirent_s; // defined in vfs.h
	36	struct mmap_attr_s; // defined in vmm.h
	37
[1]	38	/******************************************************************************************
[16]	39	* This enum defines the mnemonics for the syscall indexes.
	40	* It must be kept consistent with the array defined in do_syscalls.c
[1]	41	*****************************************************************************************/
	42	enum
	43	{
[23]	44	SYS_THREAD_EXIT = 0,
	45	SYS_MMAP = 1,
	46	SYS_THREAD_CREATE = 2,
	47	SYS_THREAD_JOIN = 3,
	48	SYS_THREAD_DETACH = 4,
	49	SYS_THREAD_YIELD = 5,
	50	SYS_SEM = 6,
	51	SYS_CONDVAR = 7,
	52	SYS_BARRIER = 8,
	53	SYS_MUTEX = 9,
	54
	55	SYS_SLEEP = 10,
	56	SYS_WAKEUP = 11,
	57	SYS_OPEN = 12,
	58	SYS_CREAT = 13,
	59	SYS_READ = 14,
	60	SYS_WRITE = 15,
	61	SYS_LSEEK = 16,
	62	SYS_CLOSE = 17,
	63	SYS_UNLINK = 18,
	64	SYS_PIPE = 19,
	65
	66	SYS_CHDIR = 20,
	67	SYS_MKDIR = 21,
	68	SYS_MKFIFO = 22,
	69	SYS_OPENDIR = 23,
	70	SYS_READDIR = 24,
	71	SYS_CLOSEDIR = 25,
	72	SYS_GETCWD = 26,
	73	SYS_CLOCK = 27,
	74	SYS_ALARM = 28,
	75	SYS_RMDIR = 29,
	76
	77	SYS_UTLS = 30,
	78	SYS_CHMOD = 31,
	79	SYS_SIGNAL = 32,
	80	SYS_TIMEOFDAY = 33,
	81	SYS_KILL = 34,
	82	SYS_GETPID = 35,
	83	SYS_FORK = 36,
	84	SYS_EXEC = 37,
	85	SYS_STAT = 38,
	86	SYS_TRACE = 39,
	87
	88	SYSCALLS_NR = 40,
[1]	89	};
	90
[23]	91
[1]	92	/********************************************************************************************/
[23]	93	/****************** system calls **************************************************/
[1]	94	/********************************************************************************************/
	95
	96	/*********************************************************************************************
[23]	97	* [0] This function terminates the execution of the calling user thread value,
	98	* and makes the exit_value pointer available to any successful pthread_join() with the
	99	* terminating thread.
	100	*********************************************************************************************
	101	* @ exit_vallue : [out] pointer to to the parrent thread if attached.
	102	* @ return 0 if success / return -1 if failure.
[1]	103	********************************************************************************************/
[23]	104	int sys_thread_exit( void * exit_value );
[16]	105
	106	/*********************************************************************************************
[23]	107	* [1] This function map physical memory (or a file) in the calling thread virtual space.
	108	* The <attr> argument is a pointer on a structure containing arguments, defined in vmm.h.
	109	* TODO not implemented yet...
	110	*********************************************************************************************
	111	* @ attr : pointer on attributes structure.
	112	* @ return 0 if success / return -1 if failure.
[16]	113	********************************************************************************************/
[23]	114	int sys_mmap( struct mmap_attr_s * attr );
[16]	115
	116	/*********************************************************************************************
[23]	117	* [2] This function creates a new user thread. The <user_attr> argument is a pointer
	118	* on astructure containing the thread attributes, defined in thread.h file.
	119	*********************************************************************************************
	120	* @ new_thread : [out] local pointer on created thread descriptor.
	121	* @ user_attr : [in] pointer on thread attributes structure.
	122	* @ start_func : [in] pointer on start function.
	123	* @ start_args : [in] pointer on start function arguments.
	124	* @ return 0 if success / return -1 if failure.
[16]	125	********************************************************************************************/
[23]	126	int sys_thread_create( struct thread_s * new_thread,
	127	struct pthread_attr_s * user_attr,
	128	void * start_func,
	129	void * start_args );
[16]	130
	131	/*********************************************************************************************
[23]	132	* [3] This blocking function suspend execution of the calling thread until completion
	133	* of another target thread identified by the <trdid> argument.
	134	* If the <exit_value> argument is not NULL, the value passed to pthread_exit() by the
	135	* target thread is stored in the location referenced by exit_value.
	136	*********************************************************************************************
	137	* @ trdid : [in] target thread identifier.
	138	* @ thread : [out] buffer for exit_value returned by target thread.
	139	* @ return 0 if success / return -1 if failure.
[16]	140	********************************************************************************************/
[23]	141	int sys_thread_join( trdid_t trdid,
	142	void ** exit_value );
[16]	143
	144	/*********************************************************************************************
[23]	145	* [4] This function detach a joinable thread.
	146	*********************************************************************************************
	147	* @ trdid : thread identifier.
	148	* @ return 0 if success / return -1 if failure.
[16]	149	********************************************************************************************/
[23]	150	int sys_thread_detach( trdid_t trdid );
[16]	151
	152	/*********************************************************************************************
[23]	153	* [5] This function calls the scheduler for the core running the calling thread.
	154	*********************************************************************************************
	155	* @ return always 0.
[16]	156	********************************************************************************************/
	157	int sys_thread_yield();
	158
	159	/*********************************************************************************************
[23]	160	* [6] This function implement all operations on a POSIX unnamed semaphore,
	161	* that can be shared by threads running in different clusters.
	162	* The kernel structure representing a remote semaphore is in the remote_sem.h file,
	163	* and the code implementing the operations is in the remore_sem.c file.
	164	*********************************************************************************************
	165	* @ vaddr : semaphore virtual address in user space == identifier.
	166	* @ operation : SEM_INIT / SEM_DESTROY / SEM_GETVALUE / SEM_POST / SEM_WAIT.
	167	* @ value : pointer on in/out argument in user space.
	168	* @ return 0 if success / return -1 if failure.
[16]	169	********************************************************************************************/
[23]	170	int sys_sem( void * vaddr,
	171	uint32_t operation,
	172	uint32_t * value );
[16]	173
[23]	174	typedef enum
	175	{
	176	SEM_INIT,
	177	SEM_DESTROY,
	178	SEM_GETVALUE,
	179	SEM_WAIT,
	180	SEM_POST,
	181	}
	182	sem_operation_t;
	183
[16]	184	/*********************************************************************************************
[23]	185	* [7] This function implement all operations on a POSIX condition variable.
	186	* The kernel structure representing a cond_var is defined in the remote_cv.h file,
	187	* The code implementing the operations is defined in the remote_cv.c file.
	188	*********************************************************************************************
	189	* @ vaddr : condvar virtual address in user space == identifier.
	190	* @ operation : operation type (see below).
	191	* @ attr : mutex virtual address in user space == identifier.
	192	* @ return 0 if success / return -1 if failure.
[16]	193	********************************************************************************************/
[23]	194	int sys_condvar( void * condvar,
	195	uint32_t operation,
	196	void * mutex );
[16]	197
[23]	198	typedef enum
	199	{
	200	CONDVAR_INIT,
	201	CONDVAR_DESTROY,
	202	CONDVAR_WAIT,
	203	CONDVAR_SIGNAL,
	204	CONDVAR_BROADCAST,
	205	}
	206	condvar_operation_t;
	207
[16]	208	/*********************************************************************************************
[23]	209	* [8] This function implement all operations on a POSIX barrier.
	210	* The kernel structure representing a barrier is defined in the remote_barrier.h file.
	211	* The code implementting the operations is defined in the remote_barrier.c file.
	212	*********************************************************************************************
	213	* @ vaddr : barrier virtual address in user space == identifier.
	214	* @ operation : BARRIER_INIT / BARRIER_DESTROY / BARRIER_WAIT.
	215	* @ count : number of expected threads (only used by BARRIER_INIT operation).
	216	* @ return 0 if success / return -1 if failure.
[16]	217	********************************************************************************************/
[23]	218	int sys_barrier( void * vaddr,
	219	uint32_t operation,
	220	uint32_t count );
[16]	221
[23]	222	typedef enum
	223	{
	224	BARRIER_INIT,
	225	BARRIER_DESTROY,
	226	BARRIER_WAIT,
	227	}
	228	barrier_operation_t;
	229
[16]	230	/*********************************************************************************************
[23]	231	* [9] This function implement all operations on a POSIX mutex.
	232	* The kernel structure representing a barrier is defined in the remote_barrier.h file.
	233	* The code implementting the operations is defined in the remote_barrier.c file.
	234	*********************************************************************************************
	235	* @ vaddr : mutex virtual address in user space == identifier.
	236	* @ operation : MUTEX_INIT / MUTEX_DESTROY / MUTEX_LOCK / MUTEX_UNLOCK
	237	* @ attr : mutex attributes (non supported yet => must be 0).
	238	* @ return 0 if success / return -1 if failure.
[16]	239	********************************************************************************************/
[23]	240	int sys_mutex( void * vaddr,
	241	uint32_t operation,
	242	uint32_t count );
[16]	243
[23]	244	typedef enum
	245	{
	246	MUTEX_INIT,
	247	MUTEX_DESTROY,
	248	MUTEX_LOCK,
	249	MUTEX_UNLOCK,
	250	}
	251	mutex_operation_t;
	252
[16]	253	/*********************************************************************************************
[23]	254	* [10] This function block the calling thread on the THREAD_BLOCKED_GLOBAL condition,
	255	* and deschedule.
	256	*********************************************************************************************
	257	* @ return 0 if success / returns -1 if failure.
[16]	258	********************************************************************************************/
	259	int sys_thread_sleep();
	260
	261	/*********************************************************************************************
[23]	262	* [11] This function unblock the thread identified by its <trdid> from the
	263	* THREAD_BLOCKED_GLOBAL condition.
	264	*********************************************************************************************
	265	* @ trdid : target thread identifier.
	266	* @ return 0 if success / return -1 if failure.
[16]	267	********************************************************************************************/
	268	int sys_thread_wakeup();
	269
	270	/*********************************************************************************************
[23]	271	* [12] This function open or create a file.
	272	*********************************************************************************************
	273	* @ pathname : pathname (can be relative or absolute).
	274	* @ flags : bit vector attributes (see below).
	275	* @ mode : access rights.
	276	* @ return file descriptor index in fd_array if success / return -1 if failure.
[16]	277	********************************************************************************************/
[23]	278	int sys_open( char * pathname,
	279	uint32_t flags,
	280	uint32_t mode );
[16]	281
[23]	282	typedef enum
	283	{
	284	O_RDONLY = 0x0010000, /! open file in read-only mode /
	285	O_WRONLY = 0x0020000, /! open file in write-only mode /
	286	O_RDWR = 0x0030000, /! open file in read/write mode /
	287	O_NONBLOCK = 0x0040000, /! do not block if data non available /
	288	O_APPEND = 0x0080000, /! append on each write /
	289	O_CREAT = 0x0100000, /! create file if it does not exist /
	290	O_TRUNC = 0x0200000, /! file length is forced to 0 /
	291	O_EXCL = 0x0400000, /! error if VFS_O_CREAT and file exist /
	292	O_SYNC = 0x0800000, /! synchronize File System on each write /
	293	O_CLOEXEC = 0x1000000, /! set the close-on-exec flag in file descriptor /
	294	O_DIR = 0x2000000, /! new file descriptor is for a directory /
	295	}
	296	open_attributes_t;
	297
[16]	298	/*********************************************************************************************
[23]	299	* [13] This function creates a new file as specified by the arguments.
	300	* This function is obsolete, you should use open() with 0_CREATE.
	301	*********************************************************************************************
	302	* @ pathname : pathname (can be relative or absolute).
	303	* @ mode : access rights.
[16]	304	********************************************************************************************/
[23]	305	int sys_creat( char * pathname,
	306	uint32_t mode );
[16]	307
	308	/*********************************************************************************************
[23]	309	* [14] This function read bytes from an open file identified by its file descriptor.
	310	* This file can be a regular file or character oriented device.
	311	*********************************************************************************************
	312	* @ file_id : open file index in fd_array.
	313	* @ buf : buffer virtual address in user space.
	314	* @ count : number of bytes.
	315	* @ return number of bytes actually read if success / returns -1 if failure.
[16]	316	********************************************************************************************/
[23]	317	int sys_read( uint32_t file_id,
	318	void * buf,
	319	uint32_t count );
[16]	320
	321	/*********************************************************************************************
[23]	322	* [15] This function writes bytes to an open file identified by its file descriptor.
	323	* This file can be a regular file or character oriented device.
	324	*********************************************************************************************
	325	* @ file_id : open file index in fd_array.
	326	* @ buf : buffer virtual address in user space.
	327	* @ count : number of bytes.
	328	* @ return number of bytes actually written if success / returns -1 if failure.
[16]	329	********************************************************************************************/
[23]	330	int sys_write( uint32_t file_id,
	331	void * buf,
	332	uint32_t count );
[16]	333
	334	/*********************************************************************************************
[23]	335	* [16] This function epositions the offset of the file descriptor identified by <file_id>,
	336	* according to the operation type defined by the <whence> and <offset> arguments.
	337	*********************************************************************************************
	338	* @ file_id : open file index in fd_array.
	339	* @ offset : buffer virtual address in user space.
	340	* @ whence : operation type (see below).
	341	* @ return 0 if success / returns -1 if failure.
[16]	342	********************************************************************************************/
[23]	343	int sys_lseek( xptr_t file_id,
	344	uint32_t offset,
	345	uint32_t whence );
[16]	346
[23]	347	typedef enum
	348	{
	349	SEEK_SET = 0, /! new_offset <= offset /
	350	SEEK_CUR = 1, /! new_offset <= current_offset + offset /
	351	SEEK_END = 2, /! new_iffset <= current_size + offset /
	352	}
	353	lseek_operation_t;
	354
[16]	355	/*********************************************************************************************
[23]	356	* [17] This function release the memory allocated for the file descriptor identified by
	357	* the <file_id> argument, and remove the fd array_entry in all copies of the process
	358	* descriptor.
	359	*********************************************************************************************
	360	file_id : file descriptor index in fd_array.
	361	* @ return 0 if success / returns -1 if failure.
[16]	362	********************************************************************************************/
[23]	363	int sys_close( uint32_t file_id );
[16]	364
	365	/*********************************************************************************************
[23]	366	* [18] This function removes a directory entry identified by the <pathname> from its
	367	* directory, and decrement the link count of the file referenced by the link.
	368	* If the link count reduces to zero, and no process has the file open, then all resources
	369	* associated with the file are reclaimed. If one or more process have the file open when
	370	* the last link is removed, the link is removed, but the removal of the file is delayed
	371	* until all references to it have been closed.
	372	*********************************************************************************************
	373	* @ pathname : pathname (can be relative or absolute).
	374	* @ return 0 if success / returns -1 if failure.
[16]	375	********************************************************************************************/
[23]	376	int sys_unlink( char * pathname );
[16]	377
	378	/*********************************************************************************************
[23]	379	* [19] This function creates in the calling thread cluster an unnamed pipe, and two
	380	* (read and write) file descriptors.
	381	*********************************************************************************************
	382	* @ file_id[0] : [out] read only file descriptor index.
	383	* @ file_id[1] : [out] write only file descriptor index.
	384	* @ return 0 if success / return -1 if failure.
[16]	385	********************************************************************************************/
[23]	386	int sys_pipe( uint32_t file_id[2] );
[16]	387
	388	/*********************************************************************************************
[23]	389	* [20] This function change the current working directory in reference process descriptor.
	390	*********************************************************************************************
	391	* @ pathname : pathname (can be relative or absolute).
	392	* @ return 0 if success / returns -1 if failure.
[16]	393	********************************************************************************************/
[23]	394	int sys_chdir( char * pathname );
[16]	395
	396	/*********************************************************************************************
[23]	397	* [21] This function creates a new directory in file system.
	398	*********************************************************************************************
	399	* @ pathname : pathname (can be relative or absolute).
	400	* @ mode : access rights (as defined in chmod).
	401	* @ return 0 if success / returns -1 if failure.
[16]	402	********************************************************************************************/
[23]	403	int sys_mkdir( char pathname,
	404	uint32_t mode );
[16]	405
	406	/*********************************************************************************************
[23]	407	* [22] This function creates a named FIFO file in the calling thread cluster.
	408	* The associated read and write file descriptors mut be be explicitely created
	409	* using the sy_open() function.
	410	*********************************************************************************************
	411	* @ pathname : pathname (can be relative or absolute).
	412	* @ mode : access rights (as defined in chmod).
	413	* @ return 0 if success / returns -1 if failure.
[16]	414	********************************************************************************************/
[23]	415	int sys_mkfifo( char * pathname,
	416	uint32_t mode );
[16]	417
	418	/*********************************************************************************************
[23]	419	* [23] This function open a directory, that must exist in the file system.
	420	*********************************************************************************************
	421	* @ pathname : pathname (can be relative or absolute).
	422	* @ return file descriptor index in fd_array if success / return -1 if failure.
[16]	423	********************************************************************************************/
[23]	424	int sys_opendir( char * pathname );
[16]	425
	426	/*********************************************************************************************
[23]	427	* [24] This function returns in the structure pointed by the <dirent> argument various
	428	* information about an entry of the directory identified by the <file_id> argument.
	429	*********************************************************************************************
	430	* @ file_id : file descriptor index of the searched directory.
	431	* @ dirent : pointer on a dirent structure in user space.
	432	* @ return 0 if success / returns -1 if failure.
[16]	433	********************************************************************************************/
[23]	434	int sys_readdir( uint32_t file_id,
	435	struct vfs_dirent_s * dirent );
[16]	436
	437	/*********************************************************************************************
[23]	438	* [25] This function close the file descriptor previouly open by the opendir() function.
	439	*********************************************************************************************
	440	* @ file_id : file descriptor index of the searched directory.
	441	* @ return 0 if success / returns -1 if failure.
[16]	442	********************************************************************************************/
[23]	443	int sys_closedir( uint32_t file_id );
[16]	444
	445	/*********************************************************************************************
[23]	446	* [26] This function returns the pathname of the current working directory.
	447	*********************************************************************************************
	448	* buf : buffer addres in user space.
	449	* nbytes : user buffer size in bytes.
	450	* @ return 0 if success / returns -1 if failure.
[16]	451	********************************************************************************************/
[23]	452	int sys_getcwd( char * buf,
	453	uint32_t nbytes );
[16]	454
	455	/*********************************************************************************************
[23]	456	* [27] This function returns in a 64 bits user buffer the calling core cycles count.
	457	* It uses both the hardware register and the core descriptor cycles count tos take
	458	* into account a possible harware register overflow in 32 bits architectures.
	459	*********************************************************************************************
	460	* cyles : [out] address of buffer in user space.
[16]	461	********************************************************************************************/
[23]	462	int sys_clock( uint64_t * cycles );
[16]	463
	464	/*********************************************************************************************
[23]	465	* [28] This function forces the calling thread to sleep, for a fixed number of cycles.
	466	*********************************************************************************************
	467	* cycles : number of cycles.
[16]	468	********************************************************************************************/
[23]	469	int sys_alarm( uint32_t cycles );
[16]	470
	471	/*********************************************************************************************
[23]	472	* [29] This undefined function does nothing.
	473	*********************************************************************************************
	474	* @ pathname : pathname (can be relative or absolute).
	475	* @ return 0 if success / returns -1 if failure.
[16]	476	********************************************************************************************/
[23]	477	int sys_rmdir( char * pathname );
[16]	478
	479	/*********************************************************************************************
[23]	480	* [30] This function implement the operations related to User Thread Local Storage.
	481	* It is actually implemented as an uint32_t variable in the thread descriptor.
	482	*********************************************************************************************
	483	* @ operation : UTLS operation type as defined below.
	484	* @ value : argument value for the UTLS_SET operation.
	485	* @ return value for the UTLS_GET and UTLS_GET_ERRNO / return -1 if failure.
[16]	486	********************************************************************************************/
[23]	487	int sys_utls( uint32_t operation,
	488	uint32_t value );
[16]	489
[23]	490	typedef enum
	491	{
	492	UTLS_SET = 1,
	493	UTLS_GET = 2,
	494	UTLS_GET_ERRNO = 3,
	495	}
	496	utls_operation_t;
	497
[16]	498	/*********************************************************************************************
[23]	499	* [31] This function change the acces rights for the file/dir identified by the
	500	* pathname argument.
	501	*********************************************************************************************
	502	* @ pathname : pathname (can be relative or absolute).
	503	* @ rights : acces rights.
	504	* @ return 0 if success / returns -1 if failure.
[16]	505	********************************************************************************************/
[23]	506	int sys_chmod( char * pathname,
	507	uint32_t rights );
[16]	508
	509	/*********************************************************************************************
[23]	510	* [32] This function associate a specific signal handler to a given signal type.
	511	* Tee handlers for the SIGKILL and SIGSTOP signals cannot be redefined.
	512	*********************************************************************************************
	513	* @ sig_id : index defining signal type (from 1 to 31).
	514	* @ handler : pointer on fonction implementing the specific handler.
	515	* @ return 0 if success / returns -1 if failure.
[16]	516	********************************************************************************************/
[23]	517	int sys_signal( uint32_t sig_id,
	518	void * handler );
[16]	519
	520	/*********************************************************************************************
[23]	521	* [33] This function returns in the structure <tv>, defined in the time.h file,
	522	* the current time (in seconds & micro-seconds).
	523	* It is computed from the calling core descriptor.
	524	* The timezone is not supported.
	525	*********************************************************************************************
	526	* @ tv : pointer on the timeval structure.
	527	* @ tz : pointer on the timezone structure : must be NULL.
	528	* @ return 0 if success / returns -1 if failure.
[16]	529	********************************************************************************************/
[50]	530	int sys_timeofday( struct timeval * tv,
	531	struct timezone * tz );
[16]	532
	533	/*********************************************************************************************
	534	* [34] This function implements the "kill" system call.
[23]	535	* It register the signal defined by the <sig_id> argument in all thread descriptors
	536	* of a target process identified by the <pid> argument. This is done in all clusters
	537	* containing threads for the target process.
	538	* It can be executed by any thread running in any cluster, as this function uses
	539	* remote access to traverse the list of process copies in the owner cluster,
	540	* and the RPC_SIGNAL_RISE to signal the remote threads.
[16]	541	*********************************************************************************************
	542	* @ pid : target process identifier.
[23]	543	* @ sig_id : index defining the signal type (from 1 to 31).
	544	* @ return 0 if success / returns -1 if failure.
[16]	545	********************************************************************************************/
	546	int sys_kill( pid_t pid,
[23]	547	uint32_t sig_id );
[16]	548
	549	/*********************************************************************************************
[23]	550	* [35] This function implements the "getpid" system call.
	551	*********************************************************************************************
	552	* @ returns the PID for the calling thread.
[16]	553	********************************************************************************************/
[1]	554	int sys_getpid();
	555
	556	/*********************************************************************************************
[16]	557	* [36] This function implement the "fork" system call.
[1]	558	* The calling process descriptor (parent process), and the associated thread descriptor are
	559	* replicated in the same cluster as the calling thread, but the new process (child process)
[23]	560	* is registered in another target cluster, that is the new process owner.
[1]	561	* The child process and the associated main thread will be migrated to the target cluster
	562	* later, when the child process makes an "exec" or any other system call.
	563	* The target cluster depends on the "fork_user" flag and "fork_cxy" variable that can be
	564	* stored in the calling thread descriptor by the specific fork_place() system call.
	565	* If not, the sys_fork() function makes a query to the DQDT to select the target cluster.
	566	*********************************************************************************************
	567	* @ returns child process PID if success / returns -1 if failure
	568	********************************************************************************************/
	569	int sys_fork();
	570
	571	/*********************************************************************************************
[16]	572	* [37] This function implement the "exec" system call.
[1]	573	* It is executed in the client cluster, but the new process descriptor and main thread
[23]	574	* must be created in a server cluster, that is generally another cluster.
	575	* - if the server_cluster is the client cluster, call directly the process_make_exec()
	576	* function to create a new process, and launch a new thread in local cluster.
	577	* - if the target_cluster is remote, call rpc_process_exec_client() to execute the
	578	* process_make_exec() on the remote cluster.
[1]	579	* In both case this function build an exec_info_t structure containing all informations
[23]	580	* required to build the new process descriptor and the associated thread.
	581	* Finally, the calling process and thread are deleted.
[16]	582	*********************************************************************************************
[1]	583	* @ filename : string pointer on .elf filename (virtual pointer in user space)
	584	* @ argv : array of strings on process arguments (virtual pointers in user space)
	585	* @ envp : array of strings on Renvironment variables (virtual pointers in user space)
[23]	586	* @ returns O if success / returns -1 if failure.
[1]	587	********************************************************************************************/
	588	int sys_exec( char * filename,
	589	char ** argv,
	590	char ** envp );
	591
[16]	592	/*********************************************************************************************
[23]	593	* [38] This function returns in the <stat> structure, defined in the vfs.h file,
	594	* various informations on the file/directory identified by the <file_id> argument.
	595	*********************************************************************************************
	596	* @ file_id : file descriptor index in fd_array.
	597	* @ stat : pointer on the stat structure.
	598	* @ returns O if success / returns -1 if failure.
[16]	599	********************************************************************************************/
[23]	600	int sys_stat( uint32_t file_id,
	601	struct vfs_stat_s * stat );
[1]	602
	603	/*********************************************************************************************
[23]	604	* [39] This function is used to activate / desactivate Rthe trace for a thread
	605	* identified by the <trdid> and <pid> arguments.
	606	* It can be called by any other thread.
	607	*********************************************************************************************
	608	* @ operation : operation type as defined below.
	609	* @ pid : process identifier.
	610	* @ trdid : thread identifier.
	611	* @ returns O if success / returns -1 if failure.
[1]	612	********************************************************************************************/
[23]	613	int sys_trace( uint32_t operation,
	614	pid_t pid,
	615	uint32_t trdid );
[1]	616
[23]	617	typedef enum
	618	{
	619	TRACE_ON = 0,
	620	TRACE_OFF = 1,
	621	}
	622	trace_operation_t;
[1]	623
	624
[16]	625	#endif // _SYSCALLS_H_

Note: See TracBrowser for help on using the repository browser.

Download in other formats: