source: trunk/libs/newlib/src/include/opcode/cr16.h @ 507

/* cr16.h -- Header file for CR16 opcode and register tables.
   Copyright 2007, 2008, 2010, 2013 Free Software Foundation, Inc.
   Contributed by M R Swami Reddy

   This file is part of GAS, GDB and the GNU binutils.

   GAS, GDB, and GNU binutils is free software; you can redistribute it
   and/or modify it under the terms of the GNU General Public License as
   published by the Free Software Foundation; either version 3, or (at your
   option) any later version.

   GAS, GDB, and GNU binutils are distributed in the hope that they will be
   useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software Foundation,
   Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.  */

#ifndef _CR16_H_
#define _CR16_H_

/* CR16 core Registers :
   The enums are used as indices to CR16 registers table (cr16_regtab).
   Therefore, order MUST be preserved.  */

typedef enum
{
  /* 16-bit general purpose registers.  */
  r0, r1, r2, r3, 
  r4, r5, r6, r7, 
  r8, r9, r10, r11, 
  r12_L = 12, r13_L = 13, ra = 14, sp_L = 15,

  /* 32-bit general purpose registers.  */
  r12 = 12, r13 = 13, r14 = 14, r15 = 15, 
  era = 14, sp = 15, RA,

  /* Not a register.  */
  nullregister,
  MAX_REG
}
reg;

/* CR16 processor registers and special registers :
   The enums are used as indices to CR16 processor registers table
   (cr16_pregtab). Therefore, order MUST be preserved.  */

typedef enum
{
  /* processor registers.  */
  dbs = MAX_REG, 
  dsr, dcrl, dcrh, 
  car0l, car0h, car1l, car1h, 
  cfg, psr, intbasel, intbaseh, 
  ispl, isph, uspl, usph,
  dcr =  dcrl, 
  car0 = car0l, 
  car1 = car1l, 
  intbase = intbasel, 
  isp =  ispl, 
  usp =  uspl,
  /* Not a processor register.  */
  nullpregister = usph + 1,
  MAX_PREG
}
preg;

/* CR16 Register types. */

typedef enum
{
  CR16_R_REGTYPE,    /* r<N>      */
  CR16_RP_REGTYPE,   /* reg pair  */
  CR16_P_REGTYPE     /* Processor register  */
}
reg_type;

/* CR16 argument types :
   The argument types correspond to instructions operands

   Argument types :
   r - register
   rp - register pair
   c - constant
   i - immediate
   idxr - index with register
   idxrp - index with register pair
   rbase - register base
   rpbase - register pair base
   pr - processor register.  */

typedef enum
{
  arg_r,
  arg_c,
  arg_cr,
  arg_crp,
  arg_ic,
  arg_icr,
  arg_idxr,
  arg_idxrp,
  arg_rbase,
  arg_rpbase,
  arg_rp,
  arg_pr,
  arg_prp,
  arg_cc,
  arg_ra,
  /* Not an argument.  */
  nullargs
}
argtype;

/* CR16 operand types:The operand types correspond to instructions operands.  */

typedef enum
{
  dummy,
  /* N-bit signed immediate.  */
  imm3, imm4, imm5, imm6, imm16, imm20, imm32,
  /* N-bit unsigned immediate.  */
  uimm3, uimm3_1, uimm4, uimm4_1, uimm5, uimm16, uimm20, uimm32,
  /* N-bit signed displacement.  */
  disps5, disps17, disps25,
  /* N-bit unsigned displacement.  */
  dispe9,
  /* N-bit absolute address.  */
  abs20, abs24,
  /* Register relative.  */
  rra, rbase, rbase_disps20, rbase_dispe20,
  /* Register pair relative.  */
  rpbase_disps0, rpbase_dispe4, rpbase_disps4, rpbase_disps16,
  rpbase_disps20, rpbase_dispe20,
  /* Register index.  */
  rindex7_abs20, rindex8_abs20,
  /* Register pair index.  */
  rpindex_disps0, rpindex_disps14, rpindex_disps20,
  /* register.  */
  regr, 
  /* register pair.  */
  regp, 
  /* processor register.  */
  pregr, 
  /* processor register 32 bit.  */
  pregrp, 
  /* condition code - 4 bit.  */
  cc, 
  /* Not an operand.  */
  nulloperand,
  /* Maximum supported operand.  */
  MAX_OPRD
}
operand_type;

/* CR16 instruction types.  */

#define NO_TYPE_INS       0
#define ARITH_INS         1
#define LD_STOR_INS       2
#define BRANCH_INS        3
#define ARITH_BYTE_INS    4
#define SHIFT_INS         5
#define BRANCH_NEQ_INS    6
#define LD_STOR_INS_INC   7
#define STOR_IMM_INS      8
#define CSTBIT_INS        9

/* Maximum value supported for instruction types.  */
#define CR16_INS_MAX        (1 << 4)
/* Mask to record an instruction type.  */
#define CR16_INS_MASK       (CR16_INS_MAX - 1)
/* Return instruction type, given instruction's attributes.  */
#define CR16_INS_TYPE(attr) ((attr) & CR16_INS_MASK)

/* Indicates whether this instruction has a register list as parameter.  */
#define REG_LIST        CR16_INS_MAX

/* The operands in binary and assembly are placed in reverse order.
   load - (REVERSE_MATCH)/store - (! REVERSE_MATCH).  */
#define REVERSE_MATCH  (1 << 5)

/* Printing formats, where the instruction prefix isn't consecutive.  */
#define FMT_1          (1 << 9)    /* 0xF0F00000 */
#define FMT_2          (1 << 10)   /* 0xFFF0FF00 */
#define FMT_3          (1 << 11)   /* 0xFFF00F00 */
#define FMT_4          (1 << 12)   /* 0xFFF0F000 */
#define FMT_5          (1 << 13)   /* 0xFFF0FFF0 */
#define FMT_CR16       (FMT_1 | FMT_2 | FMT_3 | FMT_4 | FMT_5)

/* Indicates whether this instruction can be relaxed.  */
#define RELAXABLE      (1 << 14)

/* Indicates that instruction uses user registers (and not 
   general-purpose registers) as operands.  */
#define USER_REG       (1 << 15)


/* Instruction shouldn't allow 'sp' usage.  */
#define NO_SP          (1 << 17)

/* Instruction shouldn't allow to push a register which is used as a rptr.  */
#define NO_RPTR        (1 << 18)

/* Maximum operands per instruction.  */
#define MAX_OPERANDS     5
/* Maximum register name length. */
#define MAX_REGNAME_LEN  10
/* Maximum instruction length. */
#define MAX_INST_LEN     256


/* Values defined for the flags field of a struct operand_entry.  */

/* Operand must be an unsigned number.  */
#define OP_UNSIGNED   (1 << 0)
/* Operand must be a signed number.  */
#define OP_SIGNED     (1 << 1)
/* Operand must be a negative number.  */
#define OP_NEG        (1 << 2)
/* A special load/stor 4-bit unsigned displacement operand.  */
#define OP_DEC        (1 << 3)
/* Operand must be an even number.  */
#define OP_EVEN       (1 << 4)
/* Operand is shifted right.  */
#define OP_SHIFT      (1 << 5)
/* Operand is shifted right and decremented.  */
#define OP_SHIFT_DEC  (1 << 6)
/* Operand has reserved escape sequences.  */
#define OP_ESC        (1 << 7)
/* Operand must be a ABS20 number.  */
#define OP_ABS20      (1 << 8)
/* Operand must be a ABS24 number.  */
#define OP_ABS24      (1 << 9)
/* Operand has reserved escape sequences type 1.  */
#define OP_ESC1       (1 << 10)

/* Single operand description.  */

typedef struct
{
  /* Operand type.  */
  operand_type op_type;
  /* Operand location within the opcode.  */
  unsigned int shift;
}
operand_desc;

/* Instruction data structure used in instruction table.  */

typedef struct
{
  /* Name.  */
  const char *mnemonic;
  /* Size (in words).  */
  unsigned int size;
  /* Constant prefix (matched by the disassembler).  */
  unsigned long match;  /* ie opcode */
  /* Match size (in bits).  */
  /* MASK: if( (i & match_bits) == match ) then match */
  int match_bits;
  /* Attributes.  */
  unsigned int flags;
  /* Operands (always last, so unreferenced operands are initialized).  */
  operand_desc operands[MAX_OPERANDS];
}
inst;

/* Data structure for a single instruction's arguments (Operands).  */

typedef struct
{
  /* Register or base register.  */
  reg r;
  /* Register pair register.  */
  reg rp;
  /* Index register.  */
  reg i_r;
  /* Processor register.  */
  preg pr;
  /* Processor register. 32 bit  */
  preg prp;
  /* Constant/immediate/absolute value.  */
  long constant;
  /* CC code.  */
  unsigned int cc;
  /* Scaled index mode.  */
  unsigned int scale;
  /* Argument type.  */
  argtype type;
  /* Size of the argument (in bits) required to represent.  */
  int size;
  /* The type of the expression.  */
  unsigned char X_op;
}
argument;

/* Internal structure to hold the various entities
   corresponding to the current assembling instruction.  */

typedef struct
{
  /* Number of arguments.  */
  int nargs;
  /* The argument data structure for storing args (operands).  */
  argument arg[MAX_OPERANDS];
/* The following fields are required only by CR16-assembler.  */
#ifdef TC_CR16
  /* Expression used for setting the fixups (if any).  */
  expressionS exp;
  bfd_reloc_code_real_type rtype;
#endif /* TC_CR16 */
  /* Instruction size (in bytes).  */
  int size;
}
ins;

/* Structure to hold information about predefined operands.  */

typedef struct
{
  /* Size (in bits).  */
  unsigned int bit_size;
  /* Argument type.  */
  argtype arg_type;
  /* One bit syntax flags.  */
  int flags;
}
operand_entry;

/* Structure to hold trap handler information.  */

typedef struct
{
  /* Trap name.  */
  char *name;
  /* Index in dispatch table.  */
  unsigned int entry;
}
trap_entry;

/* Structure to hold information about predefined registers.  */

typedef struct
{
  /* Name (string representation).  */
  char *name;
  /* Value (enum representation).  */
  union
  {
    /* Register.  */
    reg reg_val;
    /* processor register.  */
    preg preg_val;
  } value;
  /* Register image.  */
  int image;
  /* Register type.  */
  reg_type type;
}
reg_entry;

/* CR16 opcode table.  */
extern const inst cr16_instruction[];
extern const unsigned int cr16_num_opcodes;
#define NUMOPCODES cr16_num_opcodes

/* CR16 operands table.  */
extern const operand_entry cr16_optab[];
extern const unsigned int cr16_num_optab;

/* CR16 registers table.  */
extern const reg_entry cr16_regtab[];
extern const unsigned int cr16_num_regs;
#define NUMREGS cr16_num_regs

/* CR16 register pair table.  */
extern const reg_entry cr16_regptab[];
extern const unsigned int cr16_num_regps;
#define NUMREGPS cr16_num_regps

/* CR16 processor registers table.  */
extern const reg_entry cr16_pregtab[];
extern const unsigned int cr16_num_pregs;
#define NUMPREGS cr16_num_pregs

/* CR16 processor registers - 32 bit table.  */
extern const reg_entry cr16_pregptab[];
extern const unsigned int cr16_num_pregps;
#define NUMPREGPS cr16_num_pregps

/* CR16 trap/interrupt table.  */
extern const trap_entry cr16_traps[];
extern const unsigned int cr16_num_traps;
#define NUMTRAPS cr16_num_traps

/* CR16 CC - codes bit table.  */
extern const char * cr16_b_cond_tab[];
extern const unsigned int cr16_num_cc;
#define NUMCC cr16_num_cc;


/* Table of instructions with no operands.  */
extern const char * cr16_no_op_insn[];

/* Current instruction we're assembling.  */
extern const inst *instruction;

/* A macro for representing the instruction "constant" opcode, that is,
   the FIXED part of the instruction. The "constant" opcode is represented
   as a 32-bit unsigned long, where OPC is expanded (by a left SHIFT)
   over that range.  */
#define BIN(OPC,SHIFT)        (OPC << SHIFT)

/* Is the current instruction type is TYPE ?  */
#define IS_INSN_TYPE(TYPE)              \
  (CR16_INS_TYPE (instruction->flags) == TYPE)

/* Is the current instruction mnemonic is MNEMONIC ?  */
#define IS_INSN_MNEMONIC(MNEMONIC)    \
  (strcmp (instruction->mnemonic, MNEMONIC) == 0)

/* Does the current instruction has register list ?  */
#define INST_HAS_REG_LIST              \
  (instruction->flags & REG_LIST)


/* Utility macros for string comparison.  */
#define streq(a, b)           (strcmp (a, b) == 0)
#define strneq(a, b, c)       (strncmp (a, b, c) == 0)

/* Long long type handling.  */
/* Replace all appearances of 'long long int' with LONGLONG.  */
typedef long long int LONGLONG;
typedef unsigned long long ULONGLONG;

/* Data types for opcode handling.  */
typedef unsigned long dwordU;
typedef unsigned short wordU;

/* Globals to store opcode data and build the instruction.  */
extern wordU cr16_words[3];
extern ULONGLONG cr16_allWords;
extern ins cr16_currInsn;

/* Prototypes for function in cr16-dis.c.  */
extern void cr16_make_instruction (void);
extern int  cr16_match_opcode (void);

#endif /* _CR16_H_ */