Context Navigation

← Previous Revision
Latest Revision
Next Revision →
Blame
Revision Log

basiccrt.S @ 591

Last change on this file since 591 was 444, checked in by satin@…, 7 years ago
add newlib,libalmos-mkh, restructure shared_syscalls.h and mini-libc
File size: 15.2 KB

Line
1	/*
2	* Basic startup code for Blackfin processor
3	*
4	* Copyright (C) 2008 Analog Devices, Inc.
5	*
6	* The authors hereby grant permission to use, copy, modify, distribute,
7	* and license this software and its documentation for any purpose, provided
8	* that existing copyright notices are retained in all copies and that this
9	* notice is included verbatim in any distributions. No written agreement,
10	* license, or royalty fee is required for any of the authorized uses.
11	* Modifications to this software may be copyrighted by their authors
12	* and need not follow the licensing terms described here, provided that
13	* the new terms are clearly indicated on the first page of each file where
14	* they apply.
15	*/
16
17	// basic startup code which
18	// - turns the cycle counter on
19	// - loads up FP & SP (both supervisor and user)
20	// - initialises the device drivers (FIOCRT)
21	// - calls monstartup to set up the profiling routines (PROFCRT)
22	// - calls the C++ startup (CPLUSCRT)
23	// - initialises argc/argv (FIOCRT/normal)
24	// - calls _main
25	// - calls _exit (which calls monexit to dump accumulated prof data (PROFCRT))
26	// - defines dummy IO routines (!FIOCRT)
27
28	#include <sys/platform.h>
29	#include <cplb.h>
30	#include <sys/anomaly_macros_rtl.h>
31
32	#define IVBh (EVT0 >> 16)
33	#define IVBl (EVT0 & 0xFFFF)
34	#define UNASSIGNED_VAL 0
35	#define UNASSIGNED_FILL 0
36	// just IVG15
37	#define INTERRUPT_BITS 0x400
38	#if defined(_ADI_THREADS) \|\| \
39	!defined(__ADSPLPBLACKFIN__) \|\| defined(__ADSPBF561__) \|\| defined(__ADSPBF566__)
40	#define SET_CLOCK_SPEED 0
41	#else
42	#define SET_CLOCK_SPEED 1
43	#endif
44
45	#if SET_CLOCK_SPEED == 1
46	#include <sys/pll.h>
47	#define SET_CLK_MSEL 0x16
48	#define SET_CLK_DF 0
49	#define SET_CLK_LOCK_COUNT 0x300
50	#define SET_CLK_CSEL 0
51	#define SET_CLK_SSEL 5
52
53	/*
54	** CLKIN == 27MHz on the EZ-Kits.
55	** D==0 means CLKIN is passed to PLL without dividing.
56	** MSEL==0x16 means VCO==27*0x16 == 594MHz
57	** CSEL==0 means CCLK==VCO == 594MHz
58	** SSEL==5 means SCLK==VCO/5 == 118MHz
59	*/
60
61	#endif
62
63	#ifdef __ADSPBF561_COREB__
64	.section .b.text,"ax",@progbits
65	.align 2;
66	.global __coreb_start;
67	.type __coreb_start, STT_FUNC;
68	__coreb_start:
69	#elif defined(__ADSPBF60x_CORE1__)
70	.section .1.text,"ax",@progbits
71	.align 2;
72	.global __core1_start;
73	.type __core1_start, STT_FUNC;
74	__core1_start:
75	#else
76	.text;
77	.align 2;
78	.global __start;
79	.type __start, STT_FUNC;
80	__start:
81	#endif
82	#if WA_05000109
83	// Avoid Anomaly ID 05000109.
84	# define SYSCFG_VALUE 0x30
85	R1 = SYSCFG_VALUE;
86	SYSCFG = R1;
87	#endif
88	#if WA_05000229
89	// Avoid Anomaly 05-00-0229: DMA5_CONFIG and SPI_CTL not cleared on reset.
90	R1 = 0x400;
91	#if defined(__ADSPBF538__) \|\| defined(__ADSPBF539__)
92	P0.L = SPI0_CTL & 0xFFFF;
93	P0.H = SPI0_CTL >> 16;
94	W[P0] = R1.L;
95	#else
96	P0.L = SPI_CTL & 0xFFFF;
97	P0.H = SPI_CTL >> 16;
98	W[P0] = R1.L;
99	#endif
100	P0.L = DMA5_CONFIG & 0xFFFF;
101	P0.H = DMA5_CONFIG >> 16;
102	R1 = 0;
103	W[P0] = R1.L;
104	#endif
105	// Zap loop counters to zero, to make sure that
106	// hw loops are disabled - it could be really baffling
107	// if the counters and bottom regs are set, and we happen
108	// to run into them.
109	R7 = 0;
110	LC0 = R7;
111	LC1 = R7;
112
113	// Clear the DAG Length regs too, so that it's safe to
114	// use I-regs without them wrapping around.
115	L0 = R7;
116	L1 = R7;
117	L2 = R7;
118	L3 = R7;
119
120	// Zero ITEST_COMMAND and DTEST_COMMAND
121	// (in case they have crud in them and
122	// does a write somewhere when we enable cache)
123	I0.L = (ITEST_COMMAND & 0xFFFF);
124	I0.H = (ITEST_COMMAND >> 16);
125	I1.L = (DTEST_COMMAND & 0xFFFF);
126	I1.H = (DTEST_COMMAND >> 16);
127	R7 = 0;
128	[I0] = R7;
129	[I1] = R7;
130	// It seems writing ITEST_COMMAND from SDRAM with icache enabled
131	// needs SSYNC.
132	#ifdef __BFIN_SDRAM
133	SSYNC;
134	#else
135	CSYNC;
136	#endif
137
138	// Initialise the Event Vector table.
139	P0.H = IVBh;
140	P0.L = IVBl;
141
142	// Install __unknown_exception_occurred in EVT so that
143	// there is defined behaviour.
144	P0 += 2*4; // Skip Emulation and Reset
145	P1 = 13;
146	R1.L = __unknown_exception_occurred;
147	R1.H = __unknown_exception_occurred;
148	LSETUP (L$ivt,L$ivt) LC0 = P1;
149	L$ivt: [P0++] = R1;
150	// Set IVG15's handler to be the start of the mode-change
151	// code. Then, before we return from the Reset back to user
152	// mode, we'll raise IVG15. This will mean we stay in supervisor
153	// mode, and continue from the mode-change point., but at a
154	// much lower priority.
155	P1.H = L$supervisor_mode;
156	P1.L = L$supervisor_mode;
157	[P0] = P1;
158
159	// Initialise the stack.
160	// Note: this points just past the end of the section.
161	// First write should be with [--SP].
162	#ifdef __BFIN_SDRAM
163	SP.L = __end + 0x400000 - 12;
164	SP.H = __end + 0x400000 - 12;
165	#else
166	#ifdef __ADSPBF561_COREB__
167	SP.L=__coreb_stack_end - 12;
168	SP.H=__coreb_stack_end - 12;
169	#elif defined(__ADSPBF60x_CORE1__)
170	SP.L=__core1_stack_end - 12;
171	SP.H=__core1_stack_end - 12;
172	#else
173	SP.L=__stack_end - 12;
174	SP.H=__stack_end - 12;
175	#endif
176	#endif
177	usp = sp;
178
179	// We're still in supervisor mode at the moment, so the FP
180	// needs to point to the supervisor stack.
181	FP = SP;
182
183	// And make space for incoming "parameters" for functions
184	// we call from here:
185	SP += -12;
186
187	// Zero out bss section
188	#ifdef __BFIN_SDRAM
189	R0.L = ___bss_start;
190	R0.H = ___bss_start;
191	R1.L = __end;
192	R1.H = __end;
193	#else
194	#ifdef __ADSPBF561_COREB__
195	R0.L = __coreb_bss_start;
196	R0.H = __coreb_bss_start;
197	R1.L = __coreb_bss_end;
198	R1.H = __coreb_bss_end;
199	#elif defined(__ADSPBF60x_CORE1__)
200	R0.L = __core1_bss_start;
201	R0.H = __core1_bss_start;
202	R1.L = __core1_bss_end;
203	R1.H = __core1_bss_end;
204	#else
205	R0.L = __bss_start;
206	R0.H = __bss_start;
207	R1.L = __bss_end;
208	R1.H = __bss_end;
209	#endif
210	#endif
211	R2 = R1 - R0;
212	R1 = 0;
213	#ifdef __ADSPBF561_COREB__
214	CALL.X __coreb_memset;
215	#elif defined(__ADSPBF60x_CORE1__)
216	CALL.X __core1_memset;
217	#else
218	CALL.X _memset;
219	#endif
220
221	R0 = INTERRUPT_BITS;
222	R0 <<= 5; // Bits 0-4 not settable.
223	// CALL.X __install_default_handlers;
224	R4 = R0; // Save modified list
225
226	R0 = SYSCFG; // Enable the Cycle counter
227	BITSET(R0,1);
228	SYSCFG = R0;
229
230	#if WA_05000137
231	// Avoid anomaly #05000137
232
233	// Set the port preferences of DAG0 and DAG1 to be
234	// different; this gives better performance when
235	// performing dual-dag operations on SDRAM.
236	P0.L = DMEM_CONTROL & 0xFFFF;
237	P0.H = DMEM_CONTROL >> 16;
238	R0 = [P0];
239	BITSET(R0, 12);
240	BITCLR(R0, 13);
241	[P0] = R0;
242	CSYNC;
243	#endif
244
245	// Reinitialise data areas in RAM from ROM, if MemInit's
246	// been used.
247	// CALL.X _mi_initialize;
248
249	#if defined(__ADSPLPBLACKFIN__)
250	#if SET_CLOCK_SPEED == 1
251
252	#if 0
253	// Check if this feature is enabled, i.e. ___clk_ctrl is defined to non-zero
254	P0.L = ___clk_ctrl;
255	P0.H = ___clk_ctrl;
256	R0 = MAX_IN_STARTUP;
257	R1 = [P0];
258	R0 = R0 - R1;
259	CC = R0;
260	IF CC JUMP L$clock_is_set;
261	#endif
262
263	// Investigate whether we are a suitable revision
264	// for boosting the system clocks.
265	// speed.
266	P0.L = DSPID & 0xFFFF;
267	P0.H = DSPID >> 16;
268	R0 = [P0];
269	R0 = R0.L (Z);
270	CC = R0 < 2;
271	IF CC JUMP L$clock_is_set;
272
273	// Set the internal Voltage-Controlled Oscillator (VCO)
274	R0 = SET_CLK_MSEL (Z);
275	R1 = SET_CLK_DF (Z);
276	R2 = SET_CLK_LOCK_COUNT (Z);
277	CALL.X __pll_set_system_vco;
278
279	// Set the Core and System clocks
280	R0 = SET_CLK_CSEL (Z);
281	R1 = SET_CLK_SSEL (Z);
282	CALL.X __pll_set_system_clocks;
283
284	L$clock_is_set:
285	#endif
286	#endif /* ADSPLPBLACKFIN */
287
288	#if defined(__ADSPBF561__) \|\| defined(__ADSPBF566__) \|\| defined(__ADSPBF606__) \|\| defined(__ADSPBF607__) \|\| defined(__ADSPBF608__) \|\| defined(__ADSPBF609__)
289
290	// Initialise the multi-core data tables.
291	// A dummy function will be called if we are not linking with
292	// -multicore
293	// CALL.X __mc_data_initialise;
294	#endif
295
296	#if 0
297	// Write the cplb exception handler to the EVT if approprate and
298	// initialise the CPLBs if they're needed. couldn't do
299	// this before we set up the stacks.
300	P2.H = ___cplb_ctrl;
301	P2.L = ___cplb_ctrl;
302	R0 = CPLB_ENABLE_ANY_CPLBS;
303	R6 = [P2];
304	R0 = R0 & R6;
305	CC = R0;
306	IF !CC JUMP L$no_cplbs;
307	#if !defined(_ADI_THREADS)
308	P1.H = __cplb_hdr;
309	P1.L = __cplb_hdr;
310	P0.H = IVBh;
311	P0.L = IVBl;
312	[P0+12] = P1; // write exception handler
313	#endif /* _ADI_THREADS */
314	R0 = R6;
315	CALL.X __cplb_init;
316	#endif
317	L$no_cplbs:
318	// Enable interrupts
319	STI R4; // Using the mask from default handlers
320	RAISE 15;
321
322	// Move the processor into user mode.
323	P0.L=L$still_interrupt_in_ipend;
324	P0.H=L$still_interrupt_in_ipend;
325	RETI=P0;
326
327	L$still_interrupt_in_ipend:
328	rti; // keep doing 'rti' until we've 'finished' servicing all
329	// interrupts of priority higher than IVG15. Normally one
330	// would expect to only have the reset interrupt in IPEND
331	// being serviced, but occasionally when debugging this may
332	// not be the case - if restart is hit when servicing an
333	// interrupt.
334	//
335	// When we clear all bits from IPEND, we'll enter user mode,
336	// then we'll automatically jump to supervisor_mode to start
337	// servicing IVG15 (which we will 'service' for the whole
338	// program, so that the program is in supervisor mode.
339	//
340	// Need to do this to 'finish' servicing the reset interupt.
341
342	L$supervisor_mode:
343	[--SP] = RETI; // re-enables the interrupt system
344
345	R0.L = UNASSIGNED_VAL;
346	R0.H = UNASSIGNED_VAL;
347	#if UNASSIGNED_FILL
348	R2=R0;
349	R3=R0;
350	R4=R0;
351	R5=R0;
352	R6=R0;
353	R7=R0;
354	P0=R0;
355	P1=R0;
356	P2=R0;
357	P3=R0;
358	P4=R0;
359	P5=R0;
360	#endif
361	// Push a RETS and Old FP onto the stack, for sanity.
362	[--SP]=R0;
363	[--SP]=R0;
364	// Make sure the FP is sensible.
365	FP = SP;
366
367	// And leave space for incoming "parameters"
368	SP += -12;
369
370	#ifdef PROFCRT
371	CALL.X monstartup; // initialise profiling routines
372	#endif /* PROFCRT */
373
374	#if !defined(__ADSPBF561_COREB__) && !defined(__ADSPBF60x_CORE1__)
375	CALL.X __init;
376
377	R0.L = __fini;
378	R0.H = __fini;
379	CALL.X _atexit;
380	#endif
381
382	#if !defined(_ADI_THREADS)
383	#ifdef FIOCRT
384	// FILE IO provides access to real command-line arguments.
385	CALL.X __getargv;
386	r1.l=__Argv;
387	r1.h=__Argv;
388	#else
389	// Default to having no arguments and a null list.
390	R0=0;
391	#ifdef __ADSPBF561_COREB__
392	R1.L=L$argv_coreb;
393	R1.H=L$argv_coreb;
394	#elif defined(__ADSPBF60x_CORE1__)
395	R1.L=L$argv_core1;
396	R1.H=L$argv_core1;
397	#else
398	R1.L=L$argv;
399	R1.H=L$argv;
400	#endif
401	#endif /* FIOCRT */
402	#endif /* _ADI_THREADS */
403
404	// At long last, call the application program.
405	#ifdef __ADSPBF561_COREB__
406	CALL.X _coreb_main;
407	#elif defined(__ADSPBF60x_CORE1__)
408	CALL.X _core1_main;
409	#else
410	CALL.X _main;
411	#endif
412
413	#if !defined(_ADI_THREADS)
414	#if !defined(__ADSPBF561_COREB__) && !defined(__ADSPBF60x_CORE1__)
415	CALL.X _exit; // passing in main's return value
416	#endif
417	#endif
418
419	#ifdef __ADSPBF561_COREB__
420	.size __coreb_start, .-__coreb_start
421	#elif defined(__ADSPBF60x_CORE1__)
422	.size __core1_start, .-__core1_start
423	#else
424	.size __start, .-__start
425	#endif
426
427	.align 2
428	.type __unknown_exception_occurred, STT_FUNC;
429	__unknown_exception_occurred:
430	// This function is invoked by the default exception
431	// handler, if it does not recognise the kind of
432	// exception that has occurred. In other words, the
433	// default handler only handles some of the system's
434	// exception types, and it does not expect any others
435	// to occur. If your application is going to be using
436	// other kinds of exceptions, you must replace the
437	// default handler with your own, that handles all the
438	// exceptions you will use.
439	//
440	// Since there's nothing we can do, we just loop here
441	// at what we hope is a suitably informative label.
442	IDLE;
443	CSYNC;
444	JUMP __unknown_exception_occurred;
445	RTS;
446	.size __unknown_exception_occurred, .-__unknown_exception_occurred
447
448	#if defined(__ADSPLPBLACKFIN__)
449	#if SET_CLOCK_SPEED == 1
450
451	/*
452	** CLKIN == 27MHz on the EZ-Kits.
453	** D==0 means CLKIN is passed to PLL without dividing.
454	** MSEL==0x16 means VCO==27*0x16 == 594MHz
455	** CSEL==0 means CCLK==VCO == 594MHz
456	** SSEL==5 means SCLK==VCO/5 == 118MHz
457	*/
458
459	// int pll_set_system_clocks(int csel, int ssel)
460	// returns 0 for success, -1 for error.
461
462	.align 2
463	.type __pll_set_system_clocks, STT_FUNC;
464	__pll_set_system_clocks:
465	P0.H = PLL_DIV >> 16;
466	P0.L = PLL_DIV & 0xFFFF;
467	R2 = W[P0] (Z);
468
469	// Plant CSEL and SSEL
470	R0 <<= 16;
471	R0.L = (4 << 8) \| 2; // 2 bits, at posn 4
472	R1 <<= 16;
473	R1.L = 4; // 4 bits, at posn 0
474	R2 = DEPOSIT(R2, R0);
475
476	#if defined(__WORKAROUND_DREG_COMP_LATENCY)
477	// Work around anomaly 05-00-0209 which affects the DEPOSIT
478	// instruction (and the EXTRACT, SIGNBITS, and EXPADJ instructions)
479	// if the previous instruction created any of its operands
480	NOP;
481	#endif
482
483	R2 = DEPOSIT(R2, R1);
484
485	W[P0] = R2;
486	SSYNC;
487	RTS;
488	.size __pll_set_system_clocks, .-__pll_set_system_clocks
489
490	// int pll_set_system_vco(int msel, int df, lockcnt)
491	.align 2
492	.type __pll_set_system_vco, STT_FUNC;
493	__pll_set_system_vco:
494	P0.H = PLL_CTL >> 16;
495	P0.L = PLL_CTL & 0xFFFF;
496	R3 = W[P0] (Z);
497	P2 = R3; // Save copy
498	R3 >>= 1; // Drop old DF
499	R1 = ROT R1 BY -1; // Move DF into CC
500	R3 = ROT R3 BY 1; // and into ctl space.
501	R0 <<= 16; // Set up pattern reg
502	R0.L = (9<<8) \| 6; // (6 bits at posn 9)
503	R1 = P2; // Get the old version
504	R3 = DEPOSIT(R3, R0);
505	CC = R1 == R3; // and if we haven't changed
506	IF CC JUMP L$done; // Anything, return
507
508	CC = R2 == 0; // Use default lockcount if
509	IF CC JUMP L$wakeup; // user one is zero.
510	P2.H = PLL_LOCKCNT >> 16;
511	P2.L = PLL_LOCKCNT & 0xFFFF;
512	W[P2] = R2; // Set the lock counter
513	L$wakeup:
514	P2.H = SIC_IWR >> 16;
515	P2.L = SIC_IWR & 0xFFFF;
516	R2 = [P2];
517	BITSET(R2, 0); // enable PLL Wakeup
518	[P2] = R2;
519
520	W[P0] = R3; // Update PLL_CTL
521	SSYNC;
522
523	CLI R2; // Avoid unnecessary interrupts
524	IDLE; // Wait until PLL has locked
525	STI R2; // Restore interrupts.
526
527	L$done:
528	RTS;
529	.size __pll_set_system_vco, .-__pll_set_system_vco
530	#endif
531	#endif /* ADSPLPBLACKFIN */
532
533	#if defined(__ADSPBF561_COREB__) \|\| defined(__ADSPBF60x_CORE1__)
534	#ifdef __ADSPBF561_COREB__
535	.section .b.text,"ax",@progbits
536	.type __coreb_memset, STT_FUNC
537	__coreb_memset:
538	#else
539	.section .1.text,"ax",@progbits
540	.type __core1_memset, STT_FUNC
541	__core1_memset:
542	#endif
543	P0 = R0 ; /* P0 = address */
544	P2 = R2 ; /* P2 = count */
545	R3 = R0 + R2; /* end */
546	CC = R2 <= 7(IU);
547	IF CC JUMP .Ltoo_small;
548	R1 = R1.B (Z); /* R1 = fill char */
549	R2 = 3;
550	R2 = R0 & R2; /* addr bottom two bits */
551	CC = R2 == 0; /* AZ set if zero. */
552	IF !CC JUMP .Lforce_align ; /* Jump if addr not aligned. */
553
554	.Laligned:
555	P1 = P2 >> 2; /* count = n/4 */
556	R2 = R1 << 8; /* create quad filler */
557	R2.L = R2.L + R1.L(NS);
558	R2.H = R2.L + R1.H(NS);
559	P2 = R3;
560
561	LSETUP (.Lquad_loop , .Lquad_loop) LC0=P1;
562	.Lquad_loop:
563	[P0++] = R2;
564
565	CC = P0 == P2;
566	IF !CC JUMP .Lbytes_left;
567	RTS;
568
569	.Lbytes_left:
570	R2 = R3; /* end point */
571	R3 = P0; /* current position */
572	R2 = R2 - R3; /* bytes left */
573	P2 = R2;
574
575	.Ltoo_small:
576	CC = P2 == 0; /* Check zero count */
577	IF CC JUMP .Lfinished; /* Unusual */
578
579	.Lbytes:
580	LSETUP (.Lbyte_loop , .Lbyte_loop) LC0=P2;
581	.Lbyte_loop:
582	B[P0++] = R1;
583
584	.Lfinished:
585	RTS;
586
587	.Lforce_align:
588	CC = BITTST (R0, 0); /* odd byte */
589	R0 = 4;
590	R0 = R0 - R2;
591	P1 = R0;
592	R0 = P0; /* Recover return address */
593	IF !CC JUMP .Lskip1;
594	B[P0++] = R1;
595	.Lskip1:
596	CC = R2 <= 2; /* 2 bytes */
597	P2 -= P1; /* reduce count */
598	IF !CC JUMP .Laligned;
599	B[P0++] = R1;
600	B[P0++] = R1;
601	JUMP .Laligned;
602	#ifdef __ADSPBF561_COREB__
603	.size __coreb_memset,.-__coreb_memset
604	#else
605	.size __core1_memset,.-__core1_memset
606	#endif
607	#endif
608
609	#ifdef __ADSPBF561_COREB__
610	.section .b.bss,"aw",@progbits
611	.align 4
612	.type L$argv_coreb, @object
613	.size L$argv_coreb, 4
614	L$argv_coreb:
615	.zero 4
616	#elif defined(__ADSPBF60x_CORE1__)
617	.section .1.bss,"aw",@progbits
618	.align 4
619	.type L$argv_core1, @object
620	.size L$argv_core1, 4
621	L$argv_core1:
622	.zero 4
623	#else
624	.local L$argv
625	.comm L$argv,4,4
626	#endif
627

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format