[444] | 1 | /* |
---|
| 2 | * The authors hereby grant permission to use, copy, modify, distribute, |
---|
| 3 | * and license this software and its documentation for any purpose, provided |
---|
| 4 | * that existing copyright notices are retained in all copies and that this |
---|
| 5 | * notice is included verbatim in any distributions. No written agreement, |
---|
| 6 | * license, or royalty fee is required for any of the authorized uses. |
---|
| 7 | * Modifications to this software may be copyrighted by their authors |
---|
| 8 | * and need not follow the licensing terms described here, provided that |
---|
| 9 | * the new terms are clearly indicated on the first page of each file where |
---|
| 10 | * they apply. |
---|
| 11 | */ |
---|
| 12 | |
---|
| 13 | /* |
---|
| 14 | ** Copyright (C) 2006-2008 Analog Devices Inc., All Rights Reserved. |
---|
| 15 | ** |
---|
| 16 | ************************************************************************************ |
---|
| 17 | ** |
---|
| 18 | ** This include file contains a list of macro "defines" to enable the programmer |
---|
| 19 | ** to use symbolic names for register-access and bit-manipulation. |
---|
| 20 | ** |
---|
| 21 | **/ |
---|
| 22 | #ifndef _DEF_BF525_H |
---|
| 23 | #define _DEF_BF525_H |
---|
| 24 | |
---|
| 25 | /* Include all Core registers and bit definitions */ |
---|
| 26 | #include <def_LPBlackfin.h> |
---|
| 27 | |
---|
| 28 | /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */ |
---|
| 29 | |
---|
| 30 | /* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ |
---|
| 31 | #include <defBF52x_base.h> |
---|
| 32 | |
---|
| 33 | /* The following are the #defines needed by ADSP-BF525 that are not in the common header */ |
---|
| 34 | |
---|
| 35 | /* USB Control Registers */ |
---|
| 36 | |
---|
| 37 | #define USB_FADDR 0xffc03800 /* Function address register */ |
---|
| 38 | #define USB_POWER 0xffc03804 /* Power management register */ |
---|
| 39 | #define USB_INTRTX 0xffc03808 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ |
---|
| 40 | #define USB_INTRRX 0xffc0380c /* Interrupt register for Rx endpoints 1 to 7 */ |
---|
| 41 | #define USB_INTRTXE 0xffc03810 /* Interrupt enable register for IntrTx */ |
---|
| 42 | #define USB_INTRRXE 0xffc03814 /* Interrupt enable register for IntrRx */ |
---|
| 43 | #define USB_INTRUSB 0xffc03818 /* Interrupt register for common USB interrupts */ |
---|
| 44 | #define USB_INTRUSBE 0xffc0381c /* Interrupt enable register for IntrUSB */ |
---|
| 45 | #define USB_FRAME 0xffc03820 /* USB frame number */ |
---|
| 46 | #define USB_INDEX 0xffc03824 /* Index register for selecting the indexed endpoint registers */ |
---|
| 47 | #define USB_TESTMODE 0xffc03828 /* Enabled USB 20 test modes */ |
---|
| 48 | #define USB_GLOBINTR 0xffc0382c /* Global Interrupt Mask register and Wakeup Exception Interrupt */ |
---|
| 49 | #define USB_GLOBAL_CTL 0xffc03830 /* Global Clock Control for the core */ |
---|
| 50 | |
---|
| 51 | /* USB Packet Control Registers */ |
---|
| 52 | |
---|
| 53 | #define USB_TX_MAX_PACKET 0xffc03840 /* Maximum packet size for Host Tx endpoint */ |
---|
| 54 | #define USB_CSR0 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ |
---|
| 55 | #define USB_TXCSR 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ |
---|
| 56 | #define USB_RX_MAX_PACKET 0xffc03848 /* Maximum packet size for Host Rx endpoint */ |
---|
| 57 | #define USB_RXCSR 0xffc0384c /* Control Status register for Host Rx endpoint */ |
---|
| 58 | #define USB_COUNT0 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ |
---|
| 59 | #define USB_RXCOUNT 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ |
---|
| 60 | #define USB_TXTYPE 0xffc03854 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ |
---|
| 61 | #define USB_NAKLIMIT0 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ |
---|
| 62 | #define USB_TXINTERVAL 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ |
---|
| 63 | #define USB_RXTYPE 0xffc0385c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ |
---|
| 64 | #define USB_RXINTERVAL 0xffc03860 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ |
---|
| 65 | #define USB_TXCOUNT 0xffc03868 /* Number of bytes to be written to the selected endpoint Tx FIFO */ |
---|
| 66 | |
---|
| 67 | /* USB Endpoint FIFO Registers */ |
---|
| 68 | |
---|
| 69 | #define USB_EP0_FIFO 0xffc03880 /* Endpoint 0 FIFO */ |
---|
| 70 | #define USB_EP1_FIFO 0xffc03888 /* Endpoint 1 FIFO */ |
---|
| 71 | #define USB_EP2_FIFO 0xffc03890 /* Endpoint 2 FIFO */ |
---|
| 72 | #define USB_EP3_FIFO 0xffc03898 /* Endpoint 3 FIFO */ |
---|
| 73 | #define USB_EP4_FIFO 0xffc038a0 /* Endpoint 4 FIFO */ |
---|
| 74 | #define USB_EP5_FIFO 0xffc038a8 /* Endpoint 5 FIFO */ |
---|
| 75 | #define USB_EP6_FIFO 0xffc038b0 /* Endpoint 6 FIFO */ |
---|
| 76 | #define USB_EP7_FIFO 0xffc038b8 /* Endpoint 7 FIFO */ |
---|
| 77 | |
---|
| 78 | /* USB OTG Control Registers */ |
---|
| 79 | |
---|
| 80 | #define USB_OTG_DEV_CTL 0xffc03900 /* OTG Device Control Register */ |
---|
| 81 | #define USB_OTG_VBUS_IRQ 0xffc03904 /* OTG VBUS Control Interrupts */ |
---|
| 82 | #define USB_OTG_VBUS_MASK 0xffc03908 /* VBUS Control Interrupt Enable */ |
---|
| 83 | |
---|
| 84 | /* USB Phy Control Registers */ |
---|
| 85 | |
---|
| 86 | #define USB_LINKINFO 0xffc03948 /* Enables programming of some PHY-side delays */ |
---|
| 87 | #define USB_VPLEN 0xffc0394c /* Determines duration of VBUS pulse for VBUS charging */ |
---|
| 88 | #define USB_HS_EOF1 0xffc03950 /* Time buffer for High-Speed transactions */ |
---|
| 89 | #define USB_FS_EOF1 0xffc03954 /* Time buffer for Full-Speed transactions */ |
---|
| 90 | #define USB_LS_EOF1 0xffc03958 /* Time buffer for Low-Speed transactions */ |
---|
| 91 | |
---|
| 92 | /* (APHY_CNTRL is for ADI usage only) */ |
---|
| 93 | |
---|
| 94 | #define USB_APHY_CNTRL 0xffc039e0 /* Register that increases visibility of Analog PHY */ |
---|
| 95 | |
---|
| 96 | /* (APHY_CALIB is for ADI usage only) */ |
---|
| 97 | |
---|
| 98 | #define USB_APHY_CALIB 0xffc039e4 /* Register used to set some calibration values */ |
---|
| 99 | |
---|
| 100 | #define USB_APHY_CNTRL2 0xffc039e8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ |
---|
| 101 | |
---|
| 102 | /* (PHY_TEST is for ADI usage only) */ |
---|
| 103 | |
---|
| 104 | #define USB_PHY_TEST 0xffc039ec /* Used for reducing simulation time and simplifies FIFO testability */ |
---|
| 105 | |
---|
| 106 | #define USB_PLLOSC_CTRL 0xffc039f0 /* Used to program different parameters for USB PLL and Oscillator */ |
---|
| 107 | #define USB_SRP_CLKDIV 0xffc039f4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ |
---|
| 108 | |
---|
| 109 | /* USB Endpoint 0 Control Registers */ |
---|
| 110 | |
---|
| 111 | #define USB_EP_NI0_TXMAXP 0xffc03a00 /* Maximum packet size for Host Tx endpoint0 */ |
---|
| 112 | #define USB_EP_NI0_TXCSR 0xffc03a04 /* Control Status register for endpoint 0 */ |
---|
| 113 | #define USB_EP_NI0_RXMAXP 0xffc03a08 /* Maximum packet size for Host Rx endpoint0 */ |
---|
| 114 | #define USB_EP_NI0_RXCSR 0xffc03a0c /* Control Status register for Host Rx endpoint0 */ |
---|
| 115 | #define USB_EP_NI0_RXCOUNT 0xffc03a10 /* Number of bytes received in endpoint 0 FIFO */ |
---|
| 116 | #define USB_EP_NI0_TXTYPE 0xffc03a14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ |
---|
| 117 | #define USB_EP_NI0_TXINTERVAL 0xffc03a18 /* Sets the NAK response timeout on Endpoint 0 */ |
---|
| 118 | #define USB_EP_NI0_RXTYPE 0xffc03a1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ |
---|
| 119 | #define USB_EP_NI0_RXINTERVAL 0xffc03a20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ |
---|
| 120 | #define USB_EP_NI0_TXCOUNT 0xffc03a28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ |
---|
| 121 | |
---|
| 122 | /* USB Endpoint 1 Control Registers */ |
---|
| 123 | |
---|
| 124 | #define USB_EP_NI1_TXMAXP 0xffc03a40 /* Maximum packet size for Host Tx endpoint1 */ |
---|
| 125 | #define USB_EP_NI1_TXCSR 0xffc03a44 /* Control Status register for endpoint1 */ |
---|
| 126 | #define USB_EP_NI1_RXMAXP 0xffc03a48 /* Maximum packet size for Host Rx endpoint1 */ |
---|
| 127 | #define USB_EP_NI1_RXCSR 0xffc03a4c /* Control Status register for Host Rx endpoint1 */ |
---|
| 128 | #define USB_EP_NI1_RXCOUNT 0xffc03a50 /* Number of bytes received in endpoint1 FIFO */ |
---|
| 129 | #define USB_EP_NI1_TXTYPE 0xffc03a54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ |
---|
| 130 | #define USB_EP_NI1_TXINTERVAL 0xffc03a58 /* Sets the NAK response timeout on Endpoint1 */ |
---|
| 131 | #define USB_EP_NI1_RXTYPE 0xffc03a5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ |
---|
| 132 | #define USB_EP_NI1_RXINTERVAL 0xffc03a60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ |
---|
| 133 | #define USB_EP_NI1_TXCOUNT 0xffc03a68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ |
---|
| 134 | |
---|
| 135 | /* USB Endpoint 2 Control Registers */ |
---|
| 136 | |
---|
| 137 | #define USB_EP_NI2_TXMAXP 0xffc03a80 /* Maximum packet size for Host Tx endpoint2 */ |
---|
| 138 | #define USB_EP_NI2_TXCSR 0xffc03a84 /* Control Status register for endpoint2 */ |
---|
| 139 | #define USB_EP_NI2_RXMAXP 0xffc03a88 /* Maximum packet size for Host Rx endpoint2 */ |
---|
| 140 | #define USB_EP_NI2_RXCSR 0xffc03a8c /* Control Status register for Host Rx endpoint2 */ |
---|
| 141 | #define USB_EP_NI2_RXCOUNT 0xffc03a90 /* Number of bytes received in endpoint2 FIFO */ |
---|
| 142 | #define USB_EP_NI2_TXTYPE 0xffc03a94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ |
---|
| 143 | #define USB_EP_NI2_TXINTERVAL 0xffc03a98 /* Sets the NAK response timeout on Endpoint2 */ |
---|
| 144 | #define USB_EP_NI2_RXTYPE 0xffc03a9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ |
---|
| 145 | #define USB_EP_NI2_RXINTERVAL 0xffc03aa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ |
---|
| 146 | #define USB_EP_NI2_TXCOUNT 0xffc03aa8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ |
---|
| 147 | |
---|
| 148 | /* USB Endpoint 3 Control Registers */ |
---|
| 149 | |
---|
| 150 | #define USB_EP_NI3_TXMAXP 0xffc03ac0 /* Maximum packet size for Host Tx endpoint3 */ |
---|
| 151 | #define USB_EP_NI3_TXCSR 0xffc03ac4 /* Control Status register for endpoint3 */ |
---|
| 152 | #define USB_EP_NI3_RXMAXP 0xffc03ac8 /* Maximum packet size for Host Rx endpoint3 */ |
---|
| 153 | #define USB_EP_NI3_RXCSR 0xffc03acc /* Control Status register for Host Rx endpoint3 */ |
---|
| 154 | #define USB_EP_NI3_RXCOUNT 0xffc03ad0 /* Number of bytes received in endpoint3 FIFO */ |
---|
| 155 | #define USB_EP_NI3_TXTYPE 0xffc03ad4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ |
---|
| 156 | #define USB_EP_NI3_TXINTERVAL 0xffc03ad8 /* Sets the NAK response timeout on Endpoint3 */ |
---|
| 157 | #define USB_EP_NI3_RXTYPE 0xffc03adc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ |
---|
| 158 | #define USB_EP_NI3_RXINTERVAL 0xffc03ae0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ |
---|
| 159 | #define USB_EP_NI3_TXCOUNT 0xffc03ae8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ |
---|
| 160 | |
---|
| 161 | /* USB Endpoint 4 Control Registers */ |
---|
| 162 | |
---|
| 163 | #define USB_EP_NI4_TXMAXP 0xffc03b00 /* Maximum packet size for Host Tx endpoint4 */ |
---|
| 164 | #define USB_EP_NI4_TXCSR 0xffc03b04 /* Control Status register for endpoint4 */ |
---|
| 165 | #define USB_EP_NI4_RXMAXP 0xffc03b08 /* Maximum packet size for Host Rx endpoint4 */ |
---|
| 166 | #define USB_EP_NI4_RXCSR 0xffc03b0c /* Control Status register for Host Rx endpoint4 */ |
---|
| 167 | #define USB_EP_NI4_RXCOUNT 0xffc03b10 /* Number of bytes received in endpoint4 FIFO */ |
---|
| 168 | #define USB_EP_NI4_TXTYPE 0xffc03b14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ |
---|
| 169 | #define USB_EP_NI4_TXINTERVAL 0xffc03b18 /* Sets the NAK response timeout on Endpoint4 */ |
---|
| 170 | #define USB_EP_NI4_RXTYPE 0xffc03b1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ |
---|
| 171 | #define USB_EP_NI4_RXINTERVAL 0xffc03b20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ |
---|
| 172 | #define USB_EP_NI4_TXCOUNT 0xffc03b28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ |
---|
| 173 | |
---|
| 174 | /* USB Endpoint 5 Control Registers */ |
---|
| 175 | |
---|
| 176 | #define USB_EP_NI5_TXMAXP 0xffc03b40 /* Maximum packet size for Host Tx endpoint5 */ |
---|
| 177 | #define USB_EP_NI5_TXCSR 0xffc03b44 /* Control Status register for endpoint5 */ |
---|
| 178 | #define USB_EP_NI5_RXMAXP 0xffc03b48 /* Maximum packet size for Host Rx endpoint5 */ |
---|
| 179 | #define USB_EP_NI5_RXCSR 0xffc03b4c /* Control Status register for Host Rx endpoint5 */ |
---|
| 180 | #define USB_EP_NI5_RXCOUNT 0xffc03b50 /* Number of bytes received in endpoint5 FIFO */ |
---|
| 181 | #define USB_EP_NI5_TXTYPE 0xffc03b54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ |
---|
| 182 | #define USB_EP_NI5_TXINTERVAL 0xffc03b58 /* Sets the NAK response timeout on Endpoint5 */ |
---|
| 183 | #define USB_EP_NI5_RXTYPE 0xffc03b5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ |
---|
| 184 | #define USB_EP_NI5_RXINTERVAL 0xffc03b60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ |
---|
| 185 | #define USB_EP_NI5_TXCOUNT 0xffc03b68 /* Number of bytes to be written to the endpoint5 Tx FIFO */ |
---|
| 186 | |
---|
| 187 | /* USB Endpoint 6 Control Registers */ |
---|
| 188 | |
---|
| 189 | #define USB_EP_NI6_TXMAXP 0xffc03b80 /* Maximum packet size for Host Tx endpoint6 */ |
---|
| 190 | #define USB_EP_NI6_TXCSR 0xffc03b84 /* Control Status register for endpoint6 */ |
---|
| 191 | #define USB_EP_NI6_RXMAXP 0xffc03b88 /* Maximum packet size for Host Rx endpoint6 */ |
---|
| 192 | #define USB_EP_NI6_RXCSR 0xffc03b8c /* Control Status register for Host Rx endpoint6 */ |
---|
| 193 | #define USB_EP_NI6_RXCOUNT 0xffc03b90 /* Number of bytes received in endpoint6 FIFO */ |
---|
| 194 | #define USB_EP_NI6_TXTYPE 0xffc03b94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ |
---|
| 195 | #define USB_EP_NI6_TXINTERVAL 0xffc03b98 /* Sets the NAK response timeout on Endpoint6 */ |
---|
| 196 | #define USB_EP_NI6_RXTYPE 0xffc03b9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ |
---|
| 197 | #define USB_EP_NI6_RXINTERVAL 0xffc03ba0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ |
---|
| 198 | #define USB_EP_NI6_TXCOUNT 0xffc03ba8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ |
---|
| 199 | |
---|
| 200 | /* USB Endpoint 7 Control Registers */ |
---|
| 201 | |
---|
| 202 | #define USB_EP_NI7_TXMAXP 0xffc03bc0 /* Maximum packet size for Host Tx endpoint7 */ |
---|
| 203 | #define USB_EP_NI7_TXCSR 0xffc03bc4 /* Control Status register for endpoint7 */ |
---|
| 204 | #define USB_EP_NI7_RXMAXP 0xffc03bc8 /* Maximum packet size for Host Rx endpoint7 */ |
---|
| 205 | #define USB_EP_NI7_RXCSR 0xffc03bcc /* Control Status register for Host Rx endpoint7 */ |
---|
| 206 | #define USB_EP_NI7_RXCOUNT 0xffc03bd0 /* Number of bytes received in endpoint7 FIFO */ |
---|
| 207 | #define USB_EP_NI7_TXTYPE 0xffc03bd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ |
---|
| 208 | #define USB_EP_NI7_TXINTERVAL 0xffc03bd8 /* Sets the NAK response timeout on Endpoint7 */ |
---|
| 209 | #define USB_EP_NI7_RXTYPE 0xffc03bdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ |
---|
| 210 | #define USB_EP_NI7_RXINTERVAL 0xffc03bf0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ |
---|
| 211 | #define USB_EP_NI7_TXCOUNT 0xffc03bf8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ |
---|
| 212 | |
---|
| 213 | #define USB_DMA_INTERRUPT 0xffc03c00 /* Indicates pending interrupts for the DMA channels */ |
---|
| 214 | |
---|
| 215 | /* USB Channel 0 Config Registers */ |
---|
| 216 | |
---|
| 217 | #define USB_DMA0CONTROL 0xffc03c04 /* DMA master channel 0 configuration */ |
---|
| 218 | #define USB_DMA0ADDRLOW 0xffc03c08 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ |
---|
| 219 | #define USB_DMA0ADDRHIGH 0xffc03c0c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ |
---|
| 220 | #define USB_DMA0COUNTLOW 0xffc03c10 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ |
---|
| 221 | #define USB_DMA0COUNTHIGH 0xffc03c14 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ |
---|
| 222 | |
---|
| 223 | /* USB Channel 1 Config Registers */ |
---|
| 224 | |
---|
| 225 | #define USB_DMA1CONTROL 0xffc03c24 /* DMA master channel 1 configuration */ |
---|
| 226 | #define USB_DMA1ADDRLOW 0xffc03c28 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ |
---|
| 227 | #define USB_DMA1ADDRHIGH 0xffc03c2c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ |
---|
| 228 | #define USB_DMA1COUNTLOW 0xffc03c30 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ |
---|
| 229 | #define USB_DMA1COUNTHIGH 0xffc03c34 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ |
---|
| 230 | |
---|
| 231 | /* USB Channel 2 Config Registers */ |
---|
| 232 | |
---|
| 233 | #define USB_DMA2CONTROL 0xffc03c44 /* DMA master channel 2 configuration */ |
---|
| 234 | #define USB_DMA2ADDRLOW 0xffc03c48 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ |
---|
| 235 | #define USB_DMA2ADDRHIGH 0xffc03c4c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ |
---|
| 236 | #define USB_DMA2COUNTLOW 0xffc03c50 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ |
---|
| 237 | #define USB_DMA2COUNTHIGH 0xffc03c54 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ |
---|
| 238 | |
---|
| 239 | /* USB Channel 3 Config Registers */ |
---|
| 240 | |
---|
| 241 | #define USB_DMA3CONTROL 0xffc03c64 /* DMA master channel 3 configuration */ |
---|
| 242 | #define USB_DMA3ADDRLOW 0xffc03c68 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ |
---|
| 243 | #define USB_DMA3ADDRHIGH 0xffc03c6c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ |
---|
| 244 | #define USB_DMA3COUNTLOW 0xffc03c70 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ |
---|
| 245 | #define USB_DMA3COUNTHIGH 0xffc03c74 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ |
---|
| 246 | |
---|
| 247 | /* USB Channel 4 Config Registers */ |
---|
| 248 | |
---|
| 249 | #define USB_DMA4CONTROL 0xffc03c84 /* DMA master channel 4 configuration */ |
---|
| 250 | #define USB_DMA4ADDRLOW 0xffc03c88 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ |
---|
| 251 | #define USB_DMA4ADDRHIGH 0xffc03c8c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ |
---|
| 252 | #define USB_DMA4COUNTLOW 0xffc03c90 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ |
---|
| 253 | #define USB_DMA4COUNTHIGH 0xffc03c94 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ |
---|
| 254 | |
---|
| 255 | /* USB Channel 5 Config Registers */ |
---|
| 256 | |
---|
| 257 | #define USB_DMA5CONTROL 0xffc03ca4 /* DMA master channel 5 configuration */ |
---|
| 258 | #define USB_DMA5ADDRLOW 0xffc03ca8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ |
---|
| 259 | #define USB_DMA5ADDRHIGH 0xffc03cac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ |
---|
| 260 | #define USB_DMA5COUNTLOW 0xffc03cb0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ |
---|
| 261 | #define USB_DMA5COUNTHIGH 0xffc03cb4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ |
---|
| 262 | |
---|
| 263 | /* USB Channel 6 Config Registers */ |
---|
| 264 | |
---|
| 265 | #define USB_DMA6CONTROL 0xffc03cc4 /* DMA master channel 6 configuration */ |
---|
| 266 | #define USB_DMA6ADDRLOW 0xffc03cc8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ |
---|
| 267 | #define USB_DMA6ADDRHIGH 0xffc03ccc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ |
---|
| 268 | #define USB_DMA6COUNTLOW 0xffc03cd0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ |
---|
| 269 | #define USB_DMA6COUNTHIGH 0xffc03cd4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ |
---|
| 270 | |
---|
| 271 | /* USB Channel 7 Config Registers */ |
---|
| 272 | |
---|
| 273 | #define USB_DMA7CONTROL 0xffc03ce4 /* DMA master channel 7 configuration */ |
---|
| 274 | #define USB_DMA7ADDRLOW 0xffc03ce8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ |
---|
| 275 | #define USB_DMA7ADDRHIGH 0xffc03cec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ |
---|
| 276 | #define USB_DMA7COUNTLOW 0xffc03cf0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ |
---|
| 277 | #define USB_DMA7COUNTHIGH 0xffc03cf4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ |
---|
| 278 | |
---|
| 279 | /* Bit masks for USB_FADDR */ |
---|
| 280 | |
---|
| 281 | #define FUNCTION_ADDRESS 0x7f /* Function address */ |
---|
| 282 | |
---|
| 283 | /* Bit masks for USB_POWER */ |
---|
| 284 | |
---|
| 285 | #define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ |
---|
| 286 | #define nENABLE_SUSPENDM 0x0 |
---|
| 287 | #define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ |
---|
| 288 | #define nSUSPEND_MODE 0x0 |
---|
| 289 | #define RESUME_MODE 0x4 /* DMA Mode */ |
---|
| 290 | #define nRESUME_MODE 0x0 |
---|
| 291 | #define RESET 0x8 /* Reset indicator */ |
---|
| 292 | #define nRESET 0x0 |
---|
| 293 | #define HS_MODE 0x10 /* High Speed mode indicator */ |
---|
| 294 | #define nHS_MODE 0x0 |
---|
| 295 | #define HS_ENABLE 0x20 /* high Speed Enable */ |
---|
| 296 | #define nHS_ENABLE 0x0 |
---|
| 297 | #define SOFT_CONN 0x40 /* Soft connect */ |
---|
| 298 | #define nSOFT_CONN 0x0 |
---|
| 299 | #define ISO_UPDATE 0x80 /* Isochronous update */ |
---|
| 300 | #define nISO_UPDATE 0x0 |
---|
| 301 | |
---|
| 302 | /* Bit masks for USB_INTRTX */ |
---|
| 303 | |
---|
| 304 | #define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ |
---|
| 305 | #define nEP0_TX 0x0 |
---|
| 306 | #define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ |
---|
| 307 | #define nEP1_TX 0x0 |
---|
| 308 | #define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ |
---|
| 309 | #define nEP2_TX 0x0 |
---|
| 310 | #define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ |
---|
| 311 | #define nEP3_TX 0x0 |
---|
| 312 | #define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ |
---|
| 313 | #define nEP4_TX 0x0 |
---|
| 314 | #define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ |
---|
| 315 | #define nEP5_TX 0x0 |
---|
| 316 | #define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ |
---|
| 317 | #define nEP6_TX 0x0 |
---|
| 318 | #define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ |
---|
| 319 | #define nEP7_TX 0x0 |
---|
| 320 | |
---|
| 321 | /* Bit masks for USB_INTRRX */ |
---|
| 322 | |
---|
| 323 | #define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ |
---|
| 324 | #define nEP1_RX 0x0 |
---|
| 325 | #define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ |
---|
| 326 | #define nEP2_RX 0x0 |
---|
| 327 | #define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ |
---|
| 328 | #define nEP3_RX 0x0 |
---|
| 329 | #define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ |
---|
| 330 | #define nEP4_RX 0x0 |
---|
| 331 | #define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ |
---|
| 332 | #define nEP5_RX 0x0 |
---|
| 333 | #define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ |
---|
| 334 | #define nEP6_RX 0x0 |
---|
| 335 | #define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ |
---|
| 336 | #define nEP7_RX 0x0 |
---|
| 337 | |
---|
| 338 | /* Bit masks for USB_INTRTXE */ |
---|
| 339 | |
---|
| 340 | #define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ |
---|
| 341 | #define nEP0_TX_E 0x0 |
---|
| 342 | #define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ |
---|
| 343 | #define nEP1_TX_E 0x0 |
---|
| 344 | #define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ |
---|
| 345 | #define nEP2_TX_E 0x0 |
---|
| 346 | #define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ |
---|
| 347 | #define nEP3_TX_E 0x0 |
---|
| 348 | #define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ |
---|
| 349 | #define nEP4_TX_E 0x0 |
---|
| 350 | #define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ |
---|
| 351 | #define nEP5_TX_E 0x0 |
---|
| 352 | #define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ |
---|
| 353 | #define nEP6_TX_E 0x0 |
---|
| 354 | #define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ |
---|
| 355 | #define nEP7_TX_E 0x0 |
---|
| 356 | |
---|
| 357 | /* Bit masks for USB_INTRRXE */ |
---|
| 358 | |
---|
| 359 | #define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ |
---|
| 360 | #define nEP1_RX_E 0x0 |
---|
| 361 | #define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ |
---|
| 362 | #define nEP2_RX_E 0x0 |
---|
| 363 | #define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ |
---|
| 364 | #define nEP3_RX_E 0x0 |
---|
| 365 | #define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ |
---|
| 366 | #define nEP4_RX_E 0x0 |
---|
| 367 | #define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ |
---|
| 368 | #define nEP5_RX_E 0x0 |
---|
| 369 | #define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ |
---|
| 370 | #define nEP6_RX_E 0x0 |
---|
| 371 | #define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ |
---|
| 372 | #define nEP7_RX_E 0x0 |
---|
| 373 | |
---|
| 374 | /* Bit masks for USB_INTRUSB */ |
---|
| 375 | |
---|
| 376 | #define SUSPEND_B 0x1 /* Suspend indicator */ |
---|
| 377 | #define nSUSPEND_B 0x0 |
---|
| 378 | #define RESUME_B 0x2 /* Resume indicator */ |
---|
| 379 | #define nRESUME_B 0x0 |
---|
| 380 | #define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ |
---|
| 381 | #define nRESET_OR_BABLE_B 0x0 |
---|
| 382 | #define SOF_B 0x8 /* Start of frame */ |
---|
| 383 | #define nSOF_B 0x0 |
---|
| 384 | #define CONN_B 0x10 /* Connection indicator */ |
---|
| 385 | #define nCONN_B 0x0 |
---|
| 386 | #define DISCON_B 0x20 /* Disconnect indicator */ |
---|
| 387 | #define nDISCON_B 0x0 |
---|
| 388 | #define SESSION_REQ_B 0x40 /* Session Request */ |
---|
| 389 | #define nSESSION_REQ_B 0x0 |
---|
| 390 | #define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ |
---|
| 391 | #define nVBUS_ERROR_B 0x0 |
---|
| 392 | |
---|
| 393 | /* Bit masks for USB_INTRUSBE */ |
---|
| 394 | |
---|
| 395 | #define SUSPEND_BE 0x1 /* Suspend indicator int enable */ |
---|
| 396 | #define nSUSPEND_BE 0x0 |
---|
| 397 | #define RESUME_BE 0x2 /* Resume indicator int enable */ |
---|
| 398 | #define nRESUME_BE 0x0 |
---|
| 399 | #define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ |
---|
| 400 | #define nRESET_OR_BABLE_BE 0x0 |
---|
| 401 | #define SOF_BE 0x8 /* Start of frame int enable */ |
---|
| 402 | #define nSOF_BE 0x0 |
---|
| 403 | #define CONN_BE 0x10 /* Connection indicator int enable */ |
---|
| 404 | #define nCONN_BE 0x0 |
---|
| 405 | #define DISCON_BE 0x20 /* Disconnect indicator int enable */ |
---|
| 406 | #define nDISCON_BE 0x0 |
---|
| 407 | #define SESSION_REQ_BE 0x40 /* Session Request int enable */ |
---|
| 408 | #define nSESSION_REQ_BE 0x0 |
---|
| 409 | #define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ |
---|
| 410 | #define nVBUS_ERROR_BE 0x0 |
---|
| 411 | |
---|
| 412 | /* Bit masks for USB_FRAME */ |
---|
| 413 | |
---|
| 414 | #define FRAME_NUMBER 0x7ff /* Frame number */ |
---|
| 415 | |
---|
| 416 | /* Bit masks for USB_INDEX */ |
---|
| 417 | |
---|
| 418 | #define SELECTED_ENDPOINT 0xf /* selected endpoint */ |
---|
| 419 | |
---|
| 420 | /* Bit masks for USB_GLOBAL_CTL */ |
---|
| 421 | |
---|
| 422 | #define GLOBAL_ENA 0x1 /* enables USB module */ |
---|
| 423 | #define nGLOBAL_ENA 0x0 |
---|
| 424 | #define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ |
---|
| 425 | #define nEP1_TX_ENA 0x0 |
---|
| 426 | #define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ |
---|
| 427 | #define nEP2_TX_ENA 0x0 |
---|
| 428 | #define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ |
---|
| 429 | #define nEP3_TX_ENA 0x0 |
---|
| 430 | #define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ |
---|
| 431 | #define nEP4_TX_ENA 0x0 |
---|
| 432 | #define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ |
---|
| 433 | #define nEP5_TX_ENA 0x0 |
---|
| 434 | #define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ |
---|
| 435 | #define nEP6_TX_ENA 0x0 |
---|
| 436 | #define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ |
---|
| 437 | #define nEP7_TX_ENA 0x0 |
---|
| 438 | #define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ |
---|
| 439 | #define nEP1_RX_ENA 0x0 |
---|
| 440 | #define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ |
---|
| 441 | #define nEP2_RX_ENA 0x0 |
---|
| 442 | #define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ |
---|
| 443 | #define nEP3_RX_ENA 0x0 |
---|
| 444 | #define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ |
---|
| 445 | #define nEP4_RX_ENA 0x0 |
---|
| 446 | #define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ |
---|
| 447 | #define nEP5_RX_ENA 0x0 |
---|
| 448 | #define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ |
---|
| 449 | #define nEP6_RX_ENA 0x0 |
---|
| 450 | #define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ |
---|
| 451 | #define nEP7_RX_ENA 0x0 |
---|
| 452 | |
---|
| 453 | /* Bit masks for USB_OTG_DEV_CTL */ |
---|
| 454 | |
---|
| 455 | #define SESSION 0x1 /* session indicator */ |
---|
| 456 | #define nSESSION 0x0 |
---|
| 457 | #define HOST_REQ 0x2 /* Host negotiation request */ |
---|
| 458 | #define nHOST_REQ 0x0 |
---|
| 459 | #define HOST_MODE 0x4 /* indicates USBDRC is a host */ |
---|
| 460 | #define nHOST_MODE 0x0 |
---|
| 461 | #define VBUS0 0x8 /* Vbus level indicator[0] */ |
---|
| 462 | #define nVBUS0 0x0 |
---|
| 463 | #define VBUS1 0x10 /* Vbus level indicator[1] */ |
---|
| 464 | #define nVBUS1 0x0 |
---|
| 465 | #define LSDEV 0x20 /* Low-speed indicator */ |
---|
| 466 | #define nLSDEV 0x0 |
---|
| 467 | #define FSDEV 0x40 /* Full or High-speed indicator */ |
---|
| 468 | #define nFSDEV 0x0 |
---|
| 469 | #define B_DEVICE 0x80 /* A' or 'B' device indicator */ |
---|
| 470 | #define nB_DEVICE 0x0 |
---|
| 471 | |
---|
| 472 | /* Bit masks for USB_OTG_VBUS_IRQ */ |
---|
| 473 | |
---|
| 474 | #define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ |
---|
| 475 | #define nDRIVE_VBUS_ON 0x0 |
---|
| 476 | #define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ |
---|
| 477 | #define nDRIVE_VBUS_OFF 0x0 |
---|
| 478 | #define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ |
---|
| 479 | #define nCHRG_VBUS_START 0x0 |
---|
| 480 | #define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ |
---|
| 481 | #define nCHRG_VBUS_END 0x0 |
---|
| 482 | #define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ |
---|
| 483 | #define nDISCHRG_VBUS_START 0x0 |
---|
| 484 | #define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ |
---|
| 485 | #define nDISCHRG_VBUS_END 0x0 |
---|
| 486 | |
---|
| 487 | /* Bit masks for USB_OTG_VBUS_MASK */ |
---|
| 488 | |
---|
| 489 | #define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ |
---|
| 490 | #define nDRIVE_VBUS_ON_ENA 0x0 |
---|
| 491 | #define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ |
---|
| 492 | #define nDRIVE_VBUS_OFF_ENA 0x0 |
---|
| 493 | #define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ |
---|
| 494 | #define nCHRG_VBUS_START_ENA 0x0 |
---|
| 495 | #define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ |
---|
| 496 | #define nCHRG_VBUS_END_ENA 0x0 |
---|
| 497 | #define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ |
---|
| 498 | #define nDISCHRG_VBUS_START_ENA 0x0 |
---|
| 499 | #define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ |
---|
| 500 | #define nDISCHRG_VBUS_END_ENA 0x0 |
---|
| 501 | |
---|
| 502 | /* Bit masks for USB_CSR0 */ |
---|
| 503 | |
---|
| 504 | #define RXPKTRDY 0x1 /* data packet receive indicator */ |
---|
| 505 | #define nRXPKTRDY 0x0 |
---|
| 506 | #define TXPKTRDY 0x2 /* data packet in FIFO indicator */ |
---|
| 507 | #define nTXPKTRDY 0x0 |
---|
| 508 | #define STALL_SENT 0x4 /* STALL handshake sent */ |
---|
| 509 | #define nSTALL_SENT 0x0 |
---|
| 510 | #define DATAEND 0x8 /* Data end indicator */ |
---|
| 511 | #define nDATAEND 0x0 |
---|
| 512 | #define SETUPEND 0x10 /* Setup end */ |
---|
| 513 | #define nSETUPEND 0x0 |
---|
| 514 | #define SENDSTALL 0x20 /* Send STALL handshake */ |
---|
| 515 | #define nSENDSTALL 0x0 |
---|
| 516 | #define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ |
---|
| 517 | #define nSERVICED_RXPKTRDY 0x0 |
---|
| 518 | #define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ |
---|
| 519 | #define nSERVICED_SETUPEND 0x0 |
---|
| 520 | #define FLUSHFIFO 0x100 /* flush endpoint FIFO */ |
---|
| 521 | #define nFLUSHFIFO 0x0 |
---|
| 522 | #define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ |
---|
| 523 | #define nSTALL_RECEIVED_H 0x0 |
---|
| 524 | #define SETUPPKT_H 0x8 /* send Setup token host mode */ |
---|
| 525 | #define nSETUPPKT_H 0x0 |
---|
| 526 | #define ERROR_H 0x10 /* timeout error indicator host mode */ |
---|
| 527 | #define nERROR_H 0x0 |
---|
| 528 | #define REQPKT_H 0x20 /* Request an IN transaction host mode */ |
---|
| 529 | #define nREQPKT_H 0x0 |
---|
| 530 | #define STATUSPKT_H 0x40 /* Status stage transaction host mode */ |
---|
| 531 | #define nSTATUSPKT_H 0x0 |
---|
| 532 | #define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ |
---|
| 533 | #define nNAK_TIMEOUT_H 0x0 |
---|
| 534 | |
---|
| 535 | /* Bit masks for USB_COUNT0 */ |
---|
| 536 | |
---|
| 537 | #define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */ |
---|
| 538 | |
---|
| 539 | /* Bit masks for USB_NAKLIMIT0 */ |
---|
| 540 | |
---|
| 541 | #define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */ |
---|
| 542 | |
---|
| 543 | /* Bit masks for USB_TX_MAX_PACKET */ |
---|
| 544 | |
---|
| 545 | #define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */ |
---|
| 546 | |
---|
| 547 | /* Bit masks for USB_RX_MAX_PACKET */ |
---|
| 548 | |
---|
| 549 | #define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */ |
---|
| 550 | |
---|
| 551 | /* Bit masks for USB_TXCSR */ |
---|
| 552 | |
---|
| 553 | #define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ |
---|
| 554 | #define nTXPKTRDY_T 0x0 |
---|
| 555 | #define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ |
---|
| 556 | #define nFIFO_NOT_EMPTY_T 0x0 |
---|
| 557 | #define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ |
---|
| 558 | #define nUNDERRUN_T 0x0 |
---|
| 559 | #define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ |
---|
| 560 | #define nFLUSHFIFO_T 0x0 |
---|
| 561 | #define STALL_SEND_T 0x10 /* issue a Stall handshake */ |
---|
| 562 | #define nSTALL_SEND_T 0x0 |
---|
| 563 | #define STALL_SENT_T 0x20 /* Stall handshake transmitted */ |
---|
| 564 | #define nSTALL_SENT_T 0x0 |
---|
| 565 | #define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ |
---|
| 566 | #define nCLEAR_DATATOGGLE_T 0x0 |
---|
| 567 | #define INCOMPTX_T 0x80 /* indicates that a large packet is split */ |
---|
| 568 | #define nINCOMPTX_T 0x0 |
---|
| 569 | #define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ |
---|
| 570 | #define nDMAREQMODE_T 0x0 |
---|
| 571 | #define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ |
---|
| 572 | #define nFORCE_DATATOGGLE_T 0x0 |
---|
| 573 | #define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ |
---|
| 574 | #define nDMAREQ_ENA_T 0x0 |
---|
| 575 | #define ISO_T 0x4000 /* enable Isochronous transfers */ |
---|
| 576 | #define nISO_T 0x0 |
---|
| 577 | #define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ |
---|
| 578 | #define nAUTOSET_T 0x0 |
---|
| 579 | #define ERROR_TH 0x4 /* error condition host mode */ |
---|
| 580 | #define nERROR_TH 0x0 |
---|
| 581 | #define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ |
---|
| 582 | #define nSTALL_RECEIVED_TH 0x0 |
---|
| 583 | #define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ |
---|
| 584 | #define nNAK_TIMEOUT_TH 0x0 |
---|
| 585 | |
---|
| 586 | /* Bit masks for USB_TXCOUNT */ |
---|
| 587 | |
---|
| 588 | #define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */ |
---|
| 589 | |
---|
| 590 | /* Bit masks for USB_RXCSR */ |
---|
| 591 | |
---|
| 592 | #define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ |
---|
| 593 | #define nRXPKTRDY_R 0x0 |
---|
| 594 | #define FIFO_FULL_R 0x2 /* FIFO not empty */ |
---|
| 595 | #define nFIFO_FULL_R 0x0 |
---|
| 596 | #define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ |
---|
| 597 | #define nOVERRUN_R 0x0 |
---|
| 598 | #define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ |
---|
| 599 | #define nDATAERROR_R 0x0 |
---|
| 600 | #define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ |
---|
| 601 | #define nFLUSHFIFO_R 0x0 |
---|
| 602 | #define STALL_SEND_R 0x20 /* issue a Stall handshake */ |
---|
| 603 | #define nSTALL_SEND_R 0x0 |
---|
| 604 | #define STALL_SENT_R 0x40 /* Stall handshake transmitted */ |
---|
| 605 | #define nSTALL_SENT_R 0x0 |
---|
| 606 | #define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ |
---|
| 607 | #define nCLEAR_DATATOGGLE_R 0x0 |
---|
| 608 | #define INCOMPRX_R 0x100 /* indicates that a large packet is split */ |
---|
| 609 | #define nINCOMPRX_R 0x0 |
---|
| 610 | #define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ |
---|
| 611 | #define nDMAREQMODE_R 0x0 |
---|
| 612 | #define DISNYET_R 0x1000 /* disable Nyet handshakes */ |
---|
| 613 | #define nDISNYET_R 0x0 |
---|
| 614 | #define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ |
---|
| 615 | #define nDMAREQ_ENA_R 0x0 |
---|
| 616 | #define ISO_R 0x4000 /* enable Isochronous transfers */ |
---|
| 617 | #define nISO_R 0x0 |
---|
| 618 | #define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ |
---|
| 619 | #define nAUTOCLEAR_R 0x0 |
---|
| 620 | #define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ |
---|
| 621 | #define nERROR_RH 0x0 |
---|
| 622 | #define REQPKT_RH 0x20 /* request an IN transaction host mode */ |
---|
| 623 | #define nREQPKT_RH 0x0 |
---|
| 624 | #define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ |
---|
| 625 | #define nSTALL_RECEIVED_RH 0x0 |
---|
| 626 | #define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ |
---|
| 627 | #define nINCOMPRX_RH 0x0 |
---|
| 628 | #define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ |
---|
| 629 | #define nDMAREQMODE_RH 0x0 |
---|
| 630 | #define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ |
---|
| 631 | #define nAUTOREQ_RH 0x0 |
---|
| 632 | |
---|
| 633 | /* Bit masks for USB_RXCOUNT */ |
---|
| 634 | |
---|
| 635 | #define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */ |
---|
| 636 | |
---|
| 637 | /* Bit masks for USB_TXTYPE */ |
---|
| 638 | |
---|
| 639 | #define TARGET_EP_NO_T 0xf /* EP number */ |
---|
| 640 | #define PROTOCOL_T 0xc /* transfer type */ |
---|
| 641 | |
---|
| 642 | /* Bit masks for USB_TXINTERVAL */ |
---|
| 643 | |
---|
| 644 | #define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */ |
---|
| 645 | |
---|
| 646 | /* Bit masks for USB_RXTYPE */ |
---|
| 647 | |
---|
| 648 | #define TARGET_EP_NO_R 0xf /* EP number */ |
---|
| 649 | #define PROTOCOL_R 0xc /* transfer type */ |
---|
| 650 | |
---|
| 651 | /* Bit masks for USB_RXINTERVAL */ |
---|
| 652 | |
---|
| 653 | #define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */ |
---|
| 654 | |
---|
| 655 | /* Bit masks for USB_DMA_INTERRUPT */ |
---|
| 656 | |
---|
| 657 | #define DMA0_INT 0x1 /* DMA0 pending interrupt */ |
---|
| 658 | #define nDMA0_INT 0x0 |
---|
| 659 | #define DMA1_INT 0x2 /* DMA1 pending interrupt */ |
---|
| 660 | #define nDMA1_INT 0x0 |
---|
| 661 | #define DMA2_INT 0x4 /* DMA2 pending interrupt */ |
---|
| 662 | #define nDMA2_INT 0x0 |
---|
| 663 | #define DMA3_INT 0x8 /* DMA3 pending interrupt */ |
---|
| 664 | #define nDMA3_INT 0x0 |
---|
| 665 | #define DMA4_INT 0x10 /* DMA4 pending interrupt */ |
---|
| 666 | #define nDMA4_INT 0x0 |
---|
| 667 | #define DMA5_INT 0x20 /* DMA5 pending interrupt */ |
---|
| 668 | #define nDMA5_INT 0x0 |
---|
| 669 | #define DMA6_INT 0x40 /* DMA6 pending interrupt */ |
---|
| 670 | #define nDMA6_INT 0x0 |
---|
| 671 | #define DMA7_INT 0x80 /* DMA7 pending interrupt */ |
---|
| 672 | #define nDMA7_INT 0x0 |
---|
| 673 | |
---|
| 674 | /* Bit masks for USB_DMAxCONTROL */ |
---|
| 675 | |
---|
| 676 | #define DMA_ENA 0x1 /* DMA enable */ |
---|
| 677 | #define nDMA_ENA 0x0 |
---|
| 678 | #define DIRECTION 0x2 /* direction of DMA transfer */ |
---|
| 679 | #define nDIRECTION 0x0 |
---|
| 680 | #define MODE 0x4 /* DMA Bus error */ |
---|
| 681 | #define nMODE 0x0 |
---|
| 682 | #define INT_ENA 0x8 /* Interrupt enable */ |
---|
| 683 | #define nINT_ENA 0x0 |
---|
| 684 | #define EPNUM 0xf0 /* EP number */ |
---|
| 685 | #define BUSERROR 0x100 /* DMA Bus error */ |
---|
| 686 | #define nBUSERROR 0x0 |
---|
| 687 | |
---|
| 688 | /* Bit masks for USB_DMAxADDRHIGH */ |
---|
| 689 | |
---|
| 690 | #define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */ |
---|
| 691 | |
---|
| 692 | /* Bit masks for USB_DMAxADDRLOW */ |
---|
| 693 | |
---|
| 694 | #define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */ |
---|
| 695 | |
---|
| 696 | /* Bit masks for USB_DMAxCOUNTHIGH */ |
---|
| 697 | |
---|
| 698 | #define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */ |
---|
| 699 | |
---|
| 700 | /* Bit masks for USB_DMAxCOUNTLOW */ |
---|
| 701 | |
---|
| 702 | #define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */ |
---|
| 703 | |
---|
| 704 | #endif /* _DEF_BF525_H */ |
---|