Context Navigation

← Previous Revision
Latest Revision
Next Revision →
Blame
Revision Log

defBF548.h @ 684

Last change on this file since 684 was 444, checked in by satin@…, 7 years ago
add newlib,libalmos-mkh, restructure shared_syscalls.h and mini-libc
File size: 127.2 KB

Line
1	/*
2	* The authors hereby grant permission to use, copy, modify, distribute,
3	* and license this software and its documentation for any purpose, provided
4	* that existing copyright notices are retained in all copies and that this
5	* notice is included verbatim in any distributions. No written agreement,
6	* license, or royalty fee is required for any of the authorized uses.
7	* Modifications to this software may be copyrighted by their authors
8	* and need not follow the licensing terms described here, provided that
9	* the new terms are clearly indicated on the first page of each file where
10	* they apply.
11	*/
12
13	/*
14	** defBF548.h
15	**
16	** Copyright (C) 2006-2008 Analog Devices Inc., All Rights Reserved.
17	**
18	************************************************************************************
19	**
20	** This include file contains a list of macro "defines" to enable the programmer
21	** to use symbolic names for register-access and bit-manipulation.
22	**
23	**/
24	#ifndef _DEF_BF548_H
25	#define _DEF_BF548_H
26
27	/* Include all Core registers and bit definitions */
28	#include <def_LPBlackfin.h>
29
30	/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
31
32	/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
33	#include <defBF54x_base.h>
34
35	#ifdef _MISRA_RULES
36	#pragma diag(push)
37	#pragma diag(suppress:misra_rule_19_4:"some macros violate rule 19.4")
38	#pragma diag(suppress:misra_rule_19_7:"Allow function-like macros ")
39	#endif /* _MISRA_RULES */
40
41	/* The following are the #defines needed by ADSP-BF548 that are not in the common header */
42
43	/* Timer Registers */
44
45	#define TIMER8_CONFIG 0xffc00600 /* Timer 8 Configuration Register */
46	#define TIMER8_COUNTER 0xffc00604 /* Timer 8 Counter Register */
47	#define TIMER8_PERIOD 0xffc00608 /* Timer 8 Period Register */
48	#define TIMER8_WIDTH 0xffc0060c /* Timer 8 Width Register */
49	#define TIMER9_CONFIG 0xffc00610 /* Timer 9 Configuration Register */
50	#define TIMER9_COUNTER 0xffc00614 /* Timer 9 Counter Register */
51	#define TIMER9_PERIOD 0xffc00618 /* Timer 9 Period Register */
52	#define TIMER9_WIDTH 0xffc0061c /* Timer 9 Width Register */
53	#define TIMER10_CONFIG 0xffc00620 /* Timer 10 Configuration Register */
54	#define TIMER10_COUNTER 0xffc00624 /* Timer 10 Counter Register */
55	#define TIMER10_PERIOD 0xffc00628 /* Timer 10 Period Register */
56	#define TIMER10_WIDTH 0xffc0062c /* Timer 10 Width Register */
57
58	/* Timer Group of 3 Registers */
59
60	#define TIMER_ENABLE1 0xffc00640 /* Timer Group of 3 Enable Register */
61	#define TIMER_DISABLE1 0xffc00644 /* Timer Group of 3 Disable Register */
62	#define TIMER_STATUS1 0xffc00648 /* Timer Group of 3 Status Register */
63
64	/* SPORT0 Registers */
65
66	#define SPORT0_TCR1 0xffc00800 /* SPORT0 Transmit Configuration 1 Register */
67	#define SPORT0_TCR2 0xffc00804 /* SPORT0 Transmit Configuration 2 Register */
68	#define SPORT0_TCLKDIV 0xffc00808 /* SPORT0 Transmit Serial Clock Divider Register */
69	#define SPORT0_TFSDIV 0xffc0080c /* SPORT0 Transmit Frame Sync Divider Register */
70	#define SPORT0_TX 0xffc00810 /* SPORT0 Transmit Data Register */
71	#define SPORT0_RX 0xffc00818 /* SPORT0 Receive Data Register */
72	#define SPORT0_RCR1 0xffc00820 /* SPORT0 Receive Configuration 1 Register */
73	#define SPORT0_RCR2 0xffc00824 /* SPORT0 Receive Configuration 2 Register */
74	#define SPORT0_RCLKDIV 0xffc00828 /* SPORT0 Receive Serial Clock Divider Register */
75	#define SPORT0_RFSDIV 0xffc0082c /* SPORT0 Receive Frame Sync Divider Register */
76	#define SPORT0_STAT 0xffc00830 /* SPORT0 Status Register */
77	#define SPORT0_CHNL 0xffc00834 /* SPORT0 Current Channel Register */
78	#define SPORT0_MCMC1 0xffc00838 /* SPORT0 Multi channel Configuration Register 1 */
79	#define SPORT0_MCMC2 0xffc0083c /* SPORT0 Multi channel Configuration Register 2 */
80	#define SPORT0_MTCS0 0xffc00840 /* SPORT0 Multi channel Transmit Select Register 0 */
81	#define SPORT0_MTCS1 0xffc00844 /* SPORT0 Multi channel Transmit Select Register 1 */
82	#define SPORT0_MTCS2 0xffc00848 /* SPORT0 Multi channel Transmit Select Register 2 */
83	#define SPORT0_MTCS3 0xffc0084c /* SPORT0 Multi channel Transmit Select Register 3 */
84	#define SPORT0_MRCS0 0xffc00850 /* SPORT0 Multi channel Receive Select Register 0 */
85	#define SPORT0_MRCS1 0xffc00854 /* SPORT0 Multi channel Receive Select Register 1 */
86	#define SPORT0_MRCS2 0xffc00858 /* SPORT0 Multi channel Receive Select Register 2 */
87	#define SPORT0_MRCS3 0xffc0085c /* SPORT0 Multi channel Receive Select Register 3 */
88
89	/* EPPI0 Registers */
90
91	#define EPPI0_STATUS 0xffc01000 /* EPPI0 Status Register */
92	#define EPPI0_HCOUNT 0xffc01004 /* EPPI0 Horizontal Transfer Count Register */
93	#define EPPI0_HDELAY 0xffc01008 /* EPPI0 Horizontal Delay Count Register */
94	#define EPPI0_VCOUNT 0xffc0100c /* EPPI0 Vertical Transfer Count Register */
95	#define EPPI0_VDELAY 0xffc01010 /* EPPI0 Vertical Delay Count Register */
96	#define EPPI0_FRAME 0xffc01014 /* EPPI0 Lines per Frame Register */
97	#define EPPI0_LINE 0xffc01018 /* EPPI0 Samples per Line Register */
98	#define EPPI0_CLKDIV 0xffc0101c /* EPPI0 Clock Divide Register */
99	#define EPPI0_CONTROL 0xffc01020 /* EPPI0 Control Register */
100	#define EPPI0_FS1W_HBL 0xffc01024 /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */
101	#define EPPI0_FS1P_AVPL 0xffc01028 /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */
102	#define EPPI0_FS2W_LVB 0xffc0102c /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */
103	#define EPPI0_FS2P_LAVF 0xffc01030 /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */
104	#define EPPI0_CLIP 0xffc01034 /* EPPI0 Clipping Register */
105
106	/* UART2 Registers */
107
108	#define UART2_DLL 0xffc02100 /* Divisor Latch Low Byte */
109	#define UART2_DLH 0xffc02104 /* Divisor Latch High Byte */
110	#define UART2_GCTL 0xffc02108 /* Global Control Register */
111	#define UART2_LCR 0xffc0210c /* Line Control Register */
112	#define UART2_MCR 0xffc02110 /* Modem Control Register */
113	#define UART2_LSR 0xffc02114 /* Line Status Register */
114	#define UART2_MSR 0xffc02118 /* Modem Status Register */
115	#define UART2_SCR 0xffc0211c /* Scratch Register */
116	#define UART2_IER_SET 0xffc02120 /* Interrupt Enable Register Set */
117	#define UART2_IER_CLEAR 0xffc02124 /* Interrupt Enable Register Clear */
118	#define UART2_THR 0xffc02128 /* Transmit Hold Register */
119	#define UART2_RBR 0xffc0212c /* Receive Buffer Register */
120
121	/* Two Wire Interface Registers (TWI1) */
122
123	#define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */
124	#define TWI1_CONTROL 0xffc02204 /* TWI Control Register */
125	#define TWI1_SLAVE_CTL 0xffc02208 /* TWI Slave Mode Control Register */
126	#define TWI1_SLAVE_STAT 0xffc0220c /* TWI Slave Mode Status Register */
127	#define TWI1_SLAVE_ADDR 0xffc02210 /* TWI Slave Mode Address Register */
128	#define TWI1_MASTER_CTL 0xffc02214 /* TWI Master Mode Control Register */
129	#define TWI1_MASTER_STAT 0xffc02218 /* TWI Master Mode Status Register */
130	#define TWI1_MASTER_ADDR 0xffc0221c /* TWI Master Mode Address Register */
131	#define TWI1_INT_STAT 0xffc02220 /* TWI Interrupt Status Register */
132	#define TWI1_INT_MASK 0xffc02224 /* TWI Interrupt Mask Register */
133	#define TWI1_FIFO_CTL 0xffc02228 /* TWI FIFO Control Register */
134	#define TWI1_FIFO_STAT 0xffc0222c /* TWI FIFO Status Register */
135	#define TWI1_XMT_DATA8 0xffc02280 /* TWI FIFO Transmit Data Single Byte Register */
136	#define TWI1_XMT_DATA16 0xffc02284 /* TWI FIFO Transmit Data Double Byte Register */
137	#define TWI1_RCV_DATA8 0xffc02288 /* TWI FIFO Receive Data Single Byte Register */
138	#define TWI1_RCV_DATA16 0xffc0228c /* TWI FIFO Receive Data Double Byte Register */
139
140	/* SPI2 Registers */
141
142	#define SPI2_CTL 0xffc02400 /* SPI2 Control Register */
143	#define SPI2_FLG 0xffc02404 /* SPI2 Flag Register */
144	#define SPI2_STAT 0xffc02408 /* SPI2 Status Register */
145	#define SPI2_TDBR 0xffc0240c /* SPI2 Transmit Data Buffer Register */
146	#define SPI2_RDBR 0xffc02410 /* SPI2 Receive Data Buffer Register */
147	#define SPI2_BAUD 0xffc02414 /* SPI2 Baud Rate Register */
148	#define SPI2_SHADOW 0xffc02418 /* SPI2 Receive Data Buffer Shadow Register */
149
150	/* CAN Controller 1 Config 1 Registers */
151
152	#define CAN1_MC1 0xffc03200 /* CAN Controller 1 Mailbox Configuration Register 1 */
153	#define CAN1_MD1 0xffc03204 /* CAN Controller 1 Mailbox Direction Register 1 */
154	#define CAN1_TRS1 0xffc03208 /* CAN Controller 1 Transmit Request Set Register 1 */
155	#define CAN1_TRR1 0xffc0320c /* CAN Controller 1 Transmit Request Reset Register 1 */
156	#define CAN1_TA1 0xffc03210 /* CAN Controller 1 Transmit Acknowledge Register 1 */
157	#define CAN1_AA1 0xffc03214 /* CAN Controller 1 Abort Acknowledge Register 1 */
158	#define CAN1_RMP1 0xffc03218 /* CAN Controller 1 Receive Message Pending Register 1 */
159	#define CAN1_RML1 0xffc0321c /* CAN Controller 1 Receive Message Lost Register 1 */
160	#define CAN1_MBTIF1 0xffc03220 /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 1 */
161	#define CAN1_MBRIF1 0xffc03224 /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 1 */
162	#define CAN1_MBIM1 0xffc03228 /* CAN Controller 1 Mailbox Interrupt Mask Register 1 */
163	#define CAN1_RFH1 0xffc0322c /* CAN Controller 1 Remote Frame Handling Enable Register 1 */
164	#define CAN1_OPSS1 0xffc03230 /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 1 */
165
166	/* CAN Controller 1 Config 2 Registers */
167
168	#define CAN1_MC2 0xffc03240 /* CAN Controller 1 Mailbox Configuration Register 2 */
169	#define CAN1_MD2 0xffc03244 /* CAN Controller 1 Mailbox Direction Register 2 */
170	#define CAN1_TRS2 0xffc03248 /* CAN Controller 1 Transmit Request Set Register 2 */
171	#define CAN1_TRR2 0xffc0324c /* CAN Controller 1 Transmit Request Reset Register 2 */
172	#define CAN1_TA2 0xffc03250 /* CAN Controller 1 Transmit Acknowledge Register 2 */
173	#define CAN1_AA2 0xffc03254 /* CAN Controller 1 Abort Acknowledge Register 2 */
174	#define CAN1_RMP2 0xffc03258 /* CAN Controller 1 Receive Message Pending Register 2 */
175	#define CAN1_RML2 0xffc0325c /* CAN Controller 1 Receive Message Lost Register 2 */
176	#define CAN1_MBTIF2 0xffc03260 /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 2 */
177	#define CAN1_MBRIF2 0xffc03264 /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 2 */
178	#define CAN1_MBIM2 0xffc03268 /* CAN Controller 1 Mailbox Interrupt Mask Register 2 */
179	#define CAN1_RFH2 0xffc0326c /* CAN Controller 1 Remote Frame Handling Enable Register 2 */
180	#define CAN1_OPSS2 0xffc03270 /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 2 */
181
182	/* CAN Controller 1 Clock/Interrupt/Counter Registers */
183
184	#define CAN1_CLOCK 0xffc03280 /* CAN Controller 1 Clock Register */
185	#define CAN1_TIMING 0xffc03284 /* CAN Controller 1 Timing Register */
186	#define CAN1_DEBUG 0xffc03288 /* CAN Controller 1 Debug Register */
187	#define CAN1_STATUS 0xffc0328c /* CAN Controller 1 Global Status Register */
188	#define CAN1_CEC 0xffc03290 /* CAN Controller 1 Error Counter Register */
189	#define CAN1_GIS 0xffc03294 /* CAN Controller 1 Global Interrupt Status Register */
190	#define CAN1_GIM 0xffc03298 /* CAN Controller 1 Global Interrupt Mask Register */
191	#define CAN1_GIF 0xffc0329c /* CAN Controller 1 Global Interrupt Flag Register */
192	#define CAN1_CONTROL 0xffc032a0 /* CAN Controller 1 Master Control Register */
193	#define CAN1_INTR 0xffc032a4 /* CAN Controller 1 Interrupt Pending Register */
194	#define CAN1_MBTD 0xffc032ac /* CAN Controller 1 Mailbox Temporary Disable Register */
195	#define CAN1_EWR 0xffc032b0 /* CAN Controller 1 Programmable Warning Level Register */
196	#define CAN1_ESR 0xffc032b4 /* CAN Controller 1 Error Status Register */
197	#define CAN1_UCCNT 0xffc032c4 /* CAN Controller 1 Universal Counter Register */
198	#define CAN1_UCRC 0xffc032c8 /* Universal Counter Reload/Capture Register */
199	#define CAN1_UCCNF 0xffc032cc /* CAN Controller 1 Universal Counter Configuration Register */
200
201	/* CAN Controller 1 Mailbox Acceptance Registers */
202
203	#define CAN1_AM00L 0xffc03300 /* CAN Controller 1 Mailbox 0 Acceptance Mask High Register */
204	#define CAN1_AM00H 0xffc03304 /* CAN Controller 1 Mailbox 0 Acceptance Mask Low Register */
205	#define CAN1_AM01L 0xffc03308 /* CAN Controller 1 Mailbox 1 Acceptance Mask High Register */
206	#define CAN1_AM01H 0xffc0330c /* CAN Controller 1 Mailbox 1 Acceptance Mask Low Register */
207	#define CAN1_AM02L 0xffc03310 /* CAN Controller 1 Mailbox 2 Acceptance Mask High Register */
208	#define CAN1_AM02H 0xffc03314 /* CAN Controller 1 Mailbox 2 Acceptance Mask Low Register */
209	#define CAN1_AM03L 0xffc03318 /* CAN Controller 1 Mailbox 3 Acceptance Mask High Register */
210	#define CAN1_AM03H 0xffc0331c /* CAN Controller 1 Mailbox 3 Acceptance Mask Low Register */
211	#define CAN1_AM04L 0xffc03320 /* CAN Controller 1 Mailbox 4 Acceptance Mask High Register */
212	#define CAN1_AM04H 0xffc03324 /* CAN Controller 1 Mailbox 4 Acceptance Mask Low Register */
213	#define CAN1_AM05L 0xffc03328 /* CAN Controller 1 Mailbox 5 Acceptance Mask High Register */
214	#define CAN1_AM05H 0xffc0332c /* CAN Controller 1 Mailbox 5 Acceptance Mask Low Register */
215	#define CAN1_AM06L 0xffc03330 /* CAN Controller 1 Mailbox 6 Acceptance Mask High Register */
216	#define CAN1_AM06H 0xffc03334 /* CAN Controller 1 Mailbox 6 Acceptance Mask Low Register */
217	#define CAN1_AM07L 0xffc03338 /* CAN Controller 1 Mailbox 7 Acceptance Mask High Register */
218	#define CAN1_AM07H 0xffc0333c /* CAN Controller 1 Mailbox 7 Acceptance Mask Low Register */
219	#define CAN1_AM08L 0xffc03340 /* CAN Controller 1 Mailbox 8 Acceptance Mask High Register */
220	#define CAN1_AM08H 0xffc03344 /* CAN Controller 1 Mailbox 8 Acceptance Mask Low Register */
221	#define CAN1_AM09L 0xffc03348 /* CAN Controller 1 Mailbox 9 Acceptance Mask High Register */
222	#define CAN1_AM09H 0xffc0334c /* CAN Controller 1 Mailbox 9 Acceptance Mask Low Register */
223	#define CAN1_AM10L 0xffc03350 /* CAN Controller 1 Mailbox 10 Acceptance Mask High Register */
224	#define CAN1_AM10H 0xffc03354 /* CAN Controller 1 Mailbox 10 Acceptance Mask Low Register */
225	#define CAN1_AM11L 0xffc03358 /* CAN Controller 1 Mailbox 11 Acceptance Mask High Register */
226	#define CAN1_AM11H 0xffc0335c /* CAN Controller 1 Mailbox 11 Acceptance Mask Low Register */
227	#define CAN1_AM12L 0xffc03360 /* CAN Controller 1 Mailbox 12 Acceptance Mask High Register */
228	#define CAN1_AM12H 0xffc03364 /* CAN Controller 1 Mailbox 12 Acceptance Mask Low Register */
229	#define CAN1_AM13L 0xffc03368 /* CAN Controller 1 Mailbox 13 Acceptance Mask High Register */
230	#define CAN1_AM13H 0xffc0336c /* CAN Controller 1 Mailbox 13 Acceptance Mask Low Register */
231	#define CAN1_AM14L 0xffc03370 /* CAN Controller 1 Mailbox 14 Acceptance Mask High Register */
232	#define CAN1_AM14H 0xffc03374 /* CAN Controller 1 Mailbox 14 Acceptance Mask Low Register */
233	#define CAN1_AM15L 0xffc03378 /* CAN Controller 1 Mailbox 15 Acceptance Mask High Register */
234	#define CAN1_AM15H 0xffc0337c /* CAN Controller 1 Mailbox 15 Acceptance Mask Low Register */
235
236	/* CAN Controller 1 Mailbox Acceptance Registers */
237
238	#define CAN1_AM16L 0xffc03380 /* CAN Controller 1 Mailbox 16 Acceptance Mask High Register */
239	#define CAN1_AM16H 0xffc03384 /* CAN Controller 1 Mailbox 16 Acceptance Mask Low Register */
240	#define CAN1_AM17L 0xffc03388 /* CAN Controller 1 Mailbox 17 Acceptance Mask High Register */
241	#define CAN1_AM17H 0xffc0338c /* CAN Controller 1 Mailbox 17 Acceptance Mask Low Register */
242	#define CAN1_AM18L 0xffc03390 /* CAN Controller 1 Mailbox 18 Acceptance Mask High Register */
243	#define CAN1_AM18H 0xffc03394 /* CAN Controller 1 Mailbox 18 Acceptance Mask Low Register */
244	#define CAN1_AM19L 0xffc03398 /* CAN Controller 1 Mailbox 19 Acceptance Mask High Register */
245	#define CAN1_AM19H 0xffc0339c /* CAN Controller 1 Mailbox 19 Acceptance Mask Low Register */
246	#define CAN1_AM20L 0xffc033a0 /* CAN Controller 1 Mailbox 20 Acceptance Mask High Register */
247	#define CAN1_AM20H 0xffc033a4 /* CAN Controller 1 Mailbox 20 Acceptance Mask Low Register */
248	#define CAN1_AM21L 0xffc033a8 /* CAN Controller 1 Mailbox 21 Acceptance Mask High Register */
249	#define CAN1_AM21H 0xffc033ac /* CAN Controller 1 Mailbox 21 Acceptance Mask Low Register */
250	#define CAN1_AM22L 0xffc033b0 /* CAN Controller 1 Mailbox 22 Acceptance Mask High Register */
251	#define CAN1_AM22H 0xffc033b4 /* CAN Controller 1 Mailbox 22 Acceptance Mask Low Register */
252	#define CAN1_AM23L 0xffc033b8 /* CAN Controller 1 Mailbox 23 Acceptance Mask High Register */
253	#define CAN1_AM23H 0xffc033bc /* CAN Controller 1 Mailbox 23 Acceptance Mask Low Register */
254	#define CAN1_AM24L 0xffc033c0 /* CAN Controller 1 Mailbox 24 Acceptance Mask High Register */
255	#define CAN1_AM24H 0xffc033c4 /* CAN Controller 1 Mailbox 24 Acceptance Mask Low Register */
256	#define CAN1_AM25L 0xffc033c8 /* CAN Controller 1 Mailbox 25 Acceptance Mask High Register */
257	#define CAN1_AM25H 0xffc033cc /* CAN Controller 1 Mailbox 25 Acceptance Mask Low Register */
258	#define CAN1_AM26L 0xffc033d0 /* CAN Controller 1 Mailbox 26 Acceptance Mask High Register */
259	#define CAN1_AM26H 0xffc033d4 /* CAN Controller 1 Mailbox 26 Acceptance Mask Low Register */
260	#define CAN1_AM27L 0xffc033d8 /* CAN Controller 1 Mailbox 27 Acceptance Mask High Register */
261	#define CAN1_AM27H 0xffc033dc /* CAN Controller 1 Mailbox 27 Acceptance Mask Low Register */
262	#define CAN1_AM28L 0xffc033e0 /* CAN Controller 1 Mailbox 28 Acceptance Mask High Register */
263	#define CAN1_AM28H 0xffc033e4 /* CAN Controller 1 Mailbox 28 Acceptance Mask Low Register */
264	#define CAN1_AM29L 0xffc033e8 /* CAN Controller 1 Mailbox 29 Acceptance Mask High Register */
265	#define CAN1_AM29H 0xffc033ec /* CAN Controller 1 Mailbox 29 Acceptance Mask Low Register */
266	#define CAN1_AM30L 0xffc033f0 /* CAN Controller 1 Mailbox 30 Acceptance Mask High Register */
267	#define CAN1_AM30H 0xffc033f4 /* CAN Controller 1 Mailbox 30 Acceptance Mask Low Register */
268	#define CAN1_AM31L 0xffc033f8 /* CAN Controller 1 Mailbox 31 Acceptance Mask High Register */
269	#define CAN1_AM31H 0xffc033fc /* CAN Controller 1 Mailbox 31 Acceptance Mask Low Register */
270
271	/* CAN Controller 1 Mailbox Data Registers */
272
273	#define CAN1_MB00_DATA0 0xffc03400 /* CAN Controller 1 Mailbox 0 Data 0 Register */
274	#define CAN1_MB00_DATA1 0xffc03404 /* CAN Controller 1 Mailbox 0 Data 1 Register */
275	#define CAN1_MB00_DATA2 0xffc03408 /* CAN Controller 1 Mailbox 0 Data 2 Register */
276	#define CAN1_MB00_DATA3 0xffc0340c /* CAN Controller 1 Mailbox 0 Data 3 Register */
277	#define CAN1_MB00_LENGTH 0xffc03410 /* CAN Controller 1 Mailbox 0 Length Register */
278	#define CAN1_MB00_TIMESTAMP 0xffc03414 /* CAN Controller 1 Mailbox 0 Timestamp Register */
279	#define CAN1_MB00_ID0 0xffc03418 /* CAN Controller 1 Mailbox 0 ID0 Register */
280	#define CAN1_MB00_ID1 0xffc0341c /* CAN Controller 1 Mailbox 0 ID1 Register */
281	#define CAN1_MB01_DATA0 0xffc03420 /* CAN Controller 1 Mailbox 1 Data 0 Register */
282	#define CAN1_MB01_DATA1 0xffc03424 /* CAN Controller 1 Mailbox 1 Data 1 Register */
283	#define CAN1_MB01_DATA2 0xffc03428 /* CAN Controller 1 Mailbox 1 Data 2 Register */
284	#define CAN1_MB01_DATA3 0xffc0342c /* CAN Controller 1 Mailbox 1 Data 3 Register */
285	#define CAN1_MB01_LENGTH 0xffc03430 /* CAN Controller 1 Mailbox 1 Length Register */
286	#define CAN1_MB01_TIMESTAMP 0xffc03434 /* CAN Controller 1 Mailbox 1 Timestamp Register */
287	#define CAN1_MB01_ID0 0xffc03438 /* CAN Controller 1 Mailbox 1 ID0 Register */
288	#define CAN1_MB01_ID1 0xffc0343c /* CAN Controller 1 Mailbox 1 ID1 Register */
289	#define CAN1_MB02_DATA0 0xffc03440 /* CAN Controller 1 Mailbox 2 Data 0 Register */
290	#define CAN1_MB02_DATA1 0xffc03444 /* CAN Controller 1 Mailbox 2 Data 1 Register */
291	#define CAN1_MB02_DATA2 0xffc03448 /* CAN Controller 1 Mailbox 2 Data 2 Register */
292	#define CAN1_MB02_DATA3 0xffc0344c /* CAN Controller 1 Mailbox 2 Data 3 Register */
293	#define CAN1_MB02_LENGTH 0xffc03450 /* CAN Controller 1 Mailbox 2 Length Register */
294	#define CAN1_MB02_TIMESTAMP 0xffc03454 /* CAN Controller 1 Mailbox 2 Timestamp Register */
295	#define CAN1_MB02_ID0 0xffc03458 /* CAN Controller 1 Mailbox 2 ID0 Register */
296	#define CAN1_MB02_ID1 0xffc0345c /* CAN Controller 1 Mailbox 2 ID1 Register */
297	#define CAN1_MB03_DATA0 0xffc03460 /* CAN Controller 1 Mailbox 3 Data 0 Register */
298	#define CAN1_MB03_DATA1 0xffc03464 /* CAN Controller 1 Mailbox 3 Data 1 Register */
299	#define CAN1_MB03_DATA2 0xffc03468 /* CAN Controller 1 Mailbox 3 Data 2 Register */
300	#define CAN1_MB03_DATA3 0xffc0346c /* CAN Controller 1 Mailbox 3 Data 3 Register */
301	#define CAN1_MB03_LENGTH 0xffc03470 /* CAN Controller 1 Mailbox 3 Length Register */
302	#define CAN1_MB03_TIMESTAMP 0xffc03474 /* CAN Controller 1 Mailbox 3 Timestamp Register */
303	#define CAN1_MB03_ID0 0xffc03478 /* CAN Controller 1 Mailbox 3 ID0 Register */
304	#define CAN1_MB03_ID1 0xffc0347c /* CAN Controller 1 Mailbox 3 ID1 Register */
305	#define CAN1_MB04_DATA0 0xffc03480 /* CAN Controller 1 Mailbox 4 Data 0 Register */
306	#define CAN1_MB04_DATA1 0xffc03484 /* CAN Controller 1 Mailbox 4 Data 1 Register */
307	#define CAN1_MB04_DATA2 0xffc03488 /* CAN Controller 1 Mailbox 4 Data 2 Register */
308	#define CAN1_MB04_DATA3 0xffc0348c /* CAN Controller 1 Mailbox 4 Data 3 Register */
309	#define CAN1_MB04_LENGTH 0xffc03490 /* CAN Controller 1 Mailbox 4 Length Register */
310	#define CAN1_MB04_TIMESTAMP 0xffc03494 /* CAN Controller 1 Mailbox 4 Timestamp Register */
311	#define CAN1_MB04_ID0 0xffc03498 /* CAN Controller 1 Mailbox 4 ID0 Register */
312	#define CAN1_MB04_ID1 0xffc0349c /* CAN Controller 1 Mailbox 4 ID1 Register */
313	#define CAN1_MB05_DATA0 0xffc034a0 /* CAN Controller 1 Mailbox 5 Data 0 Register */
314	#define CAN1_MB05_DATA1 0xffc034a4 /* CAN Controller 1 Mailbox 5 Data 1 Register */
315	#define CAN1_MB05_DATA2 0xffc034a8 /* CAN Controller 1 Mailbox 5 Data 2 Register */
316	#define CAN1_MB05_DATA3 0xffc034ac /* CAN Controller 1 Mailbox 5 Data 3 Register */
317	#define CAN1_MB05_LENGTH 0xffc034b0 /* CAN Controller 1 Mailbox 5 Length Register */
318	#define CAN1_MB05_TIMESTAMP 0xffc034b4 /* CAN Controller 1 Mailbox 5 Timestamp Register */
319	#define CAN1_MB05_ID0 0xffc034b8 /* CAN Controller 1 Mailbox 5 ID0 Register */
320	#define CAN1_MB05_ID1 0xffc034bc /* CAN Controller 1 Mailbox 5 ID1 Register */
321	#define CAN1_MB06_DATA0 0xffc034c0 /* CAN Controller 1 Mailbox 6 Data 0 Register */
322	#define CAN1_MB06_DATA1 0xffc034c4 /* CAN Controller 1 Mailbox 6 Data 1 Register */
323	#define CAN1_MB06_DATA2 0xffc034c8 /* CAN Controller 1 Mailbox 6 Data 2 Register */
324	#define CAN1_MB06_DATA3 0xffc034cc /* CAN Controller 1 Mailbox 6 Data 3 Register */
325	#define CAN1_MB06_LENGTH 0xffc034d0 /* CAN Controller 1 Mailbox 6 Length Register */
326	#define CAN1_MB06_TIMESTAMP 0xffc034d4 /* CAN Controller 1 Mailbox 6 Timestamp Register */
327	#define CAN1_MB06_ID0 0xffc034d8 /* CAN Controller 1 Mailbox 6 ID0 Register */
328	#define CAN1_MB06_ID1 0xffc034dc /* CAN Controller 1 Mailbox 6 ID1 Register */
329	#define CAN1_MB07_DATA0 0xffc034e0 /* CAN Controller 1 Mailbox 7 Data 0 Register */
330	#define CAN1_MB07_DATA1 0xffc034e4 /* CAN Controller 1 Mailbox 7 Data 1 Register */
331	#define CAN1_MB07_DATA2 0xffc034e8 /* CAN Controller 1 Mailbox 7 Data 2 Register */
332	#define CAN1_MB07_DATA3 0xffc034ec /* CAN Controller 1 Mailbox 7 Data 3 Register */
333	#define CAN1_MB07_LENGTH 0xffc034f0 /* CAN Controller 1 Mailbox 7 Length Register */
334	#define CAN1_MB07_TIMESTAMP 0xffc034f4 /* CAN Controller 1 Mailbox 7 Timestamp Register */
335	#define CAN1_MB07_ID0 0xffc034f8 /* CAN Controller 1 Mailbox 7 ID0 Register */
336	#define CAN1_MB07_ID1 0xffc034fc /* CAN Controller 1 Mailbox 7 ID1 Register */
337	#define CAN1_MB08_DATA0 0xffc03500 /* CAN Controller 1 Mailbox 8 Data 0 Register */
338	#define CAN1_MB08_DATA1 0xffc03504 /* CAN Controller 1 Mailbox 8 Data 1 Register */
339	#define CAN1_MB08_DATA2 0xffc03508 /* CAN Controller 1 Mailbox 8 Data 2 Register */
340	#define CAN1_MB08_DATA3 0xffc0350c /* CAN Controller 1 Mailbox 8 Data 3 Register */
341	#define CAN1_MB08_LENGTH 0xffc03510 /* CAN Controller 1 Mailbox 8 Length Register */
342	#define CAN1_MB08_TIMESTAMP 0xffc03514 /* CAN Controller 1 Mailbox 8 Timestamp Register */
343	#define CAN1_MB08_ID0 0xffc03518 /* CAN Controller 1 Mailbox 8 ID0 Register */
344	#define CAN1_MB08_ID1 0xffc0351c /* CAN Controller 1 Mailbox 8 ID1 Register */
345	#define CAN1_MB09_DATA0 0xffc03520 /* CAN Controller 1 Mailbox 9 Data 0 Register */
346	#define CAN1_MB09_DATA1 0xffc03524 /* CAN Controller 1 Mailbox 9 Data 1 Register */
347	#define CAN1_MB09_DATA2 0xffc03528 /* CAN Controller 1 Mailbox 9 Data 2 Register */
348	#define CAN1_MB09_DATA3 0xffc0352c /* CAN Controller 1 Mailbox 9 Data 3 Register */
349	#define CAN1_MB09_LENGTH 0xffc03530 /* CAN Controller 1 Mailbox 9 Length Register */
350	#define CAN1_MB09_TIMESTAMP 0xffc03534 /* CAN Controller 1 Mailbox 9 Timestamp Register */
351	#define CAN1_MB09_ID0 0xffc03538 /* CAN Controller 1 Mailbox 9 ID0 Register */
352	#define CAN1_MB09_ID1 0xffc0353c /* CAN Controller 1 Mailbox 9 ID1 Register */
353	#define CAN1_MB10_DATA0 0xffc03540 /* CAN Controller 1 Mailbox 10 Data 0 Register */
354	#define CAN1_MB10_DATA1 0xffc03544 /* CAN Controller 1 Mailbox 10 Data 1 Register */
355	#define CAN1_MB10_DATA2 0xffc03548 /* CAN Controller 1 Mailbox 10 Data 2 Register */
356	#define CAN1_MB10_DATA3 0xffc0354c /* CAN Controller 1 Mailbox 10 Data 3 Register */
357	#define CAN1_MB10_LENGTH 0xffc03550 /* CAN Controller 1 Mailbox 10 Length Register */
358	#define CAN1_MB10_TIMESTAMP 0xffc03554 /* CAN Controller 1 Mailbox 10 Timestamp Register */
359	#define CAN1_MB10_ID0 0xffc03558 /* CAN Controller 1 Mailbox 10 ID0 Register */
360	#define CAN1_MB10_ID1 0xffc0355c /* CAN Controller 1 Mailbox 10 ID1 Register */
361	#define CAN1_MB11_DATA0 0xffc03560 /* CAN Controller 1 Mailbox 11 Data 0 Register */
362	#define CAN1_MB11_DATA1 0xffc03564 /* CAN Controller 1 Mailbox 11 Data 1 Register */
363	#define CAN1_MB11_DATA2 0xffc03568 /* CAN Controller 1 Mailbox 11 Data 2 Register */
364	#define CAN1_MB11_DATA3 0xffc0356c /* CAN Controller 1 Mailbox 11 Data 3 Register */
365	#define CAN1_MB11_LENGTH 0xffc03570 /* CAN Controller 1 Mailbox 11 Length Register */
366	#define CAN1_MB11_TIMESTAMP 0xffc03574 /* CAN Controller 1 Mailbox 11 Timestamp Register */
367	#define CAN1_MB11_ID0 0xffc03578 /* CAN Controller 1 Mailbox 11 ID0 Register */
368	#define CAN1_MB11_ID1 0xffc0357c /* CAN Controller 1 Mailbox 11 ID1 Register */
369	#define CAN1_MB12_DATA0 0xffc03580 /* CAN Controller 1 Mailbox 12 Data 0 Register */
370	#define CAN1_MB12_DATA1 0xffc03584 /* CAN Controller 1 Mailbox 12 Data 1 Register */
371	#define CAN1_MB12_DATA2 0xffc03588 /* CAN Controller 1 Mailbox 12 Data 2 Register */
372	#define CAN1_MB12_DATA3 0xffc0358c /* CAN Controller 1 Mailbox 12 Data 3 Register */
373	#define CAN1_MB12_LENGTH 0xffc03590 /* CAN Controller 1 Mailbox 12 Length Register */
374	#define CAN1_MB12_TIMESTAMP 0xffc03594 /* CAN Controller 1 Mailbox 12 Timestamp Register */
375	#define CAN1_MB12_ID0 0xffc03598 /* CAN Controller 1 Mailbox 12 ID0 Register */
376	#define CAN1_MB12_ID1 0xffc0359c /* CAN Controller 1 Mailbox 12 ID1 Register */
377	#define CAN1_MB13_DATA0 0xffc035a0 /* CAN Controller 1 Mailbox 13 Data 0 Register */
378	#define CAN1_MB13_DATA1 0xffc035a4 /* CAN Controller 1 Mailbox 13 Data 1 Register */
379	#define CAN1_MB13_DATA2 0xffc035a8 /* CAN Controller 1 Mailbox 13 Data 2 Register */
380	#define CAN1_MB13_DATA3 0xffc035ac /* CAN Controller 1 Mailbox 13 Data 3 Register */
381	#define CAN1_MB13_LENGTH 0xffc035b0 /* CAN Controller 1 Mailbox 13 Length Register */
382	#define CAN1_MB13_TIMESTAMP 0xffc035b4 /* CAN Controller 1 Mailbox 13 Timestamp Register */
383	#define CAN1_MB13_ID0 0xffc035b8 /* CAN Controller 1 Mailbox 13 ID0 Register */
384	#define CAN1_MB13_ID1 0xffc035bc /* CAN Controller 1 Mailbox 13 ID1 Register */
385	#define CAN1_MB14_DATA0 0xffc035c0 /* CAN Controller 1 Mailbox 14 Data 0 Register */
386	#define CAN1_MB14_DATA1 0xffc035c4 /* CAN Controller 1 Mailbox 14 Data 1 Register */
387	#define CAN1_MB14_DATA2 0xffc035c8 /* CAN Controller 1 Mailbox 14 Data 2 Register */
388	#define CAN1_MB14_DATA3 0xffc035cc /* CAN Controller 1 Mailbox 14 Data 3 Register */
389	#define CAN1_MB14_LENGTH 0xffc035d0 /* CAN Controller 1 Mailbox 14 Length Register */
390	#define CAN1_MB14_TIMESTAMP 0xffc035d4 /* CAN Controller 1 Mailbox 14 Timestamp Register */
391	#define CAN1_MB14_ID0 0xffc035d8 /* CAN Controller 1 Mailbox 14 ID0 Register */
392	#define CAN1_MB14_ID1 0xffc035dc /* CAN Controller 1 Mailbox 14 ID1 Register */
393	#define CAN1_MB15_DATA0 0xffc035e0 /* CAN Controller 1 Mailbox 15 Data 0 Register */
394	#define CAN1_MB15_DATA1 0xffc035e4 /* CAN Controller 1 Mailbox 15 Data 1 Register */
395	#define CAN1_MB15_DATA2 0xffc035e8 /* CAN Controller 1 Mailbox 15 Data 2 Register */
396	#define CAN1_MB15_DATA3 0xffc035ec /* CAN Controller 1 Mailbox 15 Data 3 Register */
397	#define CAN1_MB15_LENGTH 0xffc035f0 /* CAN Controller 1 Mailbox 15 Length Register */
398	#define CAN1_MB15_TIMESTAMP 0xffc035f4 /* CAN Controller 1 Mailbox 15 Timestamp Register */
399	#define CAN1_MB15_ID0 0xffc035f8 /* CAN Controller 1 Mailbox 15 ID0 Register */
400	#define CAN1_MB15_ID1 0xffc035fc /* CAN Controller 1 Mailbox 15 ID1 Register */
401
402	/* CAN Controller 1 Mailbox Data Registers */
403
404	#define CAN1_MB16_DATA0 0xffc03600 /* CAN Controller 1 Mailbox 16 Data 0 Register */
405	#define CAN1_MB16_DATA1 0xffc03604 /* CAN Controller 1 Mailbox 16 Data 1 Register */
406	#define CAN1_MB16_DATA2 0xffc03608 /* CAN Controller 1 Mailbox 16 Data 2 Register */
407	#define CAN1_MB16_DATA3 0xffc0360c /* CAN Controller 1 Mailbox 16 Data 3 Register */
408	#define CAN1_MB16_LENGTH 0xffc03610 /* CAN Controller 1 Mailbox 16 Length Register */
409	#define CAN1_MB16_TIMESTAMP 0xffc03614 /* CAN Controller 1 Mailbox 16 Timestamp Register */
410	#define CAN1_MB16_ID0 0xffc03618 /* CAN Controller 1 Mailbox 16 ID0 Register */
411	#define CAN1_MB16_ID1 0xffc0361c /* CAN Controller 1 Mailbox 16 ID1 Register */
412	#define CAN1_MB17_DATA0 0xffc03620 /* CAN Controller 1 Mailbox 17 Data 0 Register */
413	#define CAN1_MB17_DATA1 0xffc03624 /* CAN Controller 1 Mailbox 17 Data 1 Register */
414	#define CAN1_MB17_DATA2 0xffc03628 /* CAN Controller 1 Mailbox 17 Data 2 Register */
415	#define CAN1_MB17_DATA3 0xffc0362c /* CAN Controller 1 Mailbox 17 Data 3 Register */
416	#define CAN1_MB17_LENGTH 0xffc03630 /* CAN Controller 1 Mailbox 17 Length Register */
417	#define CAN1_MB17_TIMESTAMP 0xffc03634 /* CAN Controller 1 Mailbox 17 Timestamp Register */
418	#define CAN1_MB17_ID0 0xffc03638 /* CAN Controller 1 Mailbox 17 ID0 Register */
419	#define CAN1_MB17_ID1 0xffc0363c /* CAN Controller 1 Mailbox 17 ID1 Register */
420	#define CAN1_MB18_DATA0 0xffc03640 /* CAN Controller 1 Mailbox 18 Data 0 Register */
421	#define CAN1_MB18_DATA1 0xffc03644 /* CAN Controller 1 Mailbox 18 Data 1 Register */
422	#define CAN1_MB18_DATA2 0xffc03648 /* CAN Controller 1 Mailbox 18 Data 2 Register */
423	#define CAN1_MB18_DATA3 0xffc0364c /* CAN Controller 1 Mailbox 18 Data 3 Register */
424	#define CAN1_MB18_LENGTH 0xffc03650 /* CAN Controller 1 Mailbox 18 Length Register */
425	#define CAN1_MB18_TIMESTAMP 0xffc03654 /* CAN Controller 1 Mailbox 18 Timestamp Register */
426	#define CAN1_MB18_ID0 0xffc03658 /* CAN Controller 1 Mailbox 18 ID0 Register */
427	#define CAN1_MB18_ID1 0xffc0365c /* CAN Controller 1 Mailbox 18 ID1 Register */
428	#define CAN1_MB19_DATA0 0xffc03660 /* CAN Controller 1 Mailbox 19 Data 0 Register */
429	#define CAN1_MB19_DATA1 0xffc03664 /* CAN Controller 1 Mailbox 19 Data 1 Register */
430	#define CAN1_MB19_DATA2 0xffc03668 /* CAN Controller 1 Mailbox 19 Data 2 Register */
431	#define CAN1_MB19_DATA3 0xffc0366c /* CAN Controller 1 Mailbox 19 Data 3 Register */
432	#define CAN1_MB19_LENGTH 0xffc03670 /* CAN Controller 1 Mailbox 19 Length Register */
433	#define CAN1_MB19_TIMESTAMP 0xffc03674 /* CAN Controller 1 Mailbox 19 Timestamp Register */
434	#define CAN1_MB19_ID0 0xffc03678 /* CAN Controller 1 Mailbox 19 ID0 Register */
435	#define CAN1_MB19_ID1 0xffc0367c /* CAN Controller 1 Mailbox 19 ID1 Register */
436	#define CAN1_MB20_DATA0 0xffc03680 /* CAN Controller 1 Mailbox 20 Data 0 Register */
437	#define CAN1_MB20_DATA1 0xffc03684 /* CAN Controller 1 Mailbox 20 Data 1 Register */
438	#define CAN1_MB20_DATA2 0xffc03688 /* CAN Controller 1 Mailbox 20 Data 2 Register */
439	#define CAN1_MB20_DATA3 0xffc0368c /* CAN Controller 1 Mailbox 20 Data 3 Register */
440	#define CAN1_MB20_LENGTH 0xffc03690 /* CAN Controller 1 Mailbox 20 Length Register */
441	#define CAN1_MB20_TIMESTAMP 0xffc03694 /* CAN Controller 1 Mailbox 20 Timestamp Register */
442	#define CAN1_MB20_ID0 0xffc03698 /* CAN Controller 1 Mailbox 20 ID0 Register */
443	#define CAN1_MB20_ID1 0xffc0369c /* CAN Controller 1 Mailbox 20 ID1 Register */
444	#define CAN1_MB21_DATA0 0xffc036a0 /* CAN Controller 1 Mailbox 21 Data 0 Register */
445	#define CAN1_MB21_DATA1 0xffc036a4 /* CAN Controller 1 Mailbox 21 Data 1 Register */
446	#define CAN1_MB21_DATA2 0xffc036a8 /* CAN Controller 1 Mailbox 21 Data 2 Register */
447	#define CAN1_MB21_DATA3 0xffc036ac /* CAN Controller 1 Mailbox 21 Data 3 Register */
448	#define CAN1_MB21_LENGTH 0xffc036b0 /* CAN Controller 1 Mailbox 21 Length Register */
449	#define CAN1_MB21_TIMESTAMP 0xffc036b4 /* CAN Controller 1 Mailbox 21 Timestamp Register */
450	#define CAN1_MB21_ID0 0xffc036b8 /* CAN Controller 1 Mailbox 21 ID0 Register */
451	#define CAN1_MB21_ID1 0xffc036bc /* CAN Controller 1 Mailbox 21 ID1 Register */
452	#define CAN1_MB22_DATA0 0xffc036c0 /* CAN Controller 1 Mailbox 22 Data 0 Register */
453	#define CAN1_MB22_DATA1 0xffc036c4 /* CAN Controller 1 Mailbox 22 Data 1 Register */
454	#define CAN1_MB22_DATA2 0xffc036c8 /* CAN Controller 1 Mailbox 22 Data 2 Register */
455	#define CAN1_MB22_DATA3 0xffc036cc /* CAN Controller 1 Mailbox 22 Data 3 Register */
456	#define CAN1_MB22_LENGTH 0xffc036d0 /* CAN Controller 1 Mailbox 22 Length Register */
457	#define CAN1_MB22_TIMESTAMP 0xffc036d4 /* CAN Controller 1 Mailbox 22 Timestamp Register */
458	#define CAN1_MB22_ID0 0xffc036d8 /* CAN Controller 1 Mailbox 22 ID0 Register */
459	#define CAN1_MB22_ID1 0xffc036dc /* CAN Controller 1 Mailbox 22 ID1 Register */
460	#define CAN1_MB23_DATA0 0xffc036e0 /* CAN Controller 1 Mailbox 23 Data 0 Register */
461	#define CAN1_MB23_DATA1 0xffc036e4 /* CAN Controller 1 Mailbox 23 Data 1 Register */
462	#define CAN1_MB23_DATA2 0xffc036e8 /* CAN Controller 1 Mailbox 23 Data 2 Register */
463	#define CAN1_MB23_DATA3 0xffc036ec /* CAN Controller 1 Mailbox 23 Data 3 Register */
464	#define CAN1_MB23_LENGTH 0xffc036f0 /* CAN Controller 1 Mailbox 23 Length Register */
465	#define CAN1_MB23_TIMESTAMP 0xffc036f4 /* CAN Controller 1 Mailbox 23 Timestamp Register */
466	#define CAN1_MB23_ID0 0xffc036f8 /* CAN Controller 1 Mailbox 23 ID0 Register */
467	#define CAN1_MB23_ID1 0xffc036fc /* CAN Controller 1 Mailbox 23 ID1 Register */
468	#define CAN1_MB24_DATA0 0xffc03700 /* CAN Controller 1 Mailbox 24 Data 0 Register */
469	#define CAN1_MB24_DATA1 0xffc03704 /* CAN Controller 1 Mailbox 24 Data 1 Register */
470	#define CAN1_MB24_DATA2 0xffc03708 /* CAN Controller 1 Mailbox 24 Data 2 Register */
471	#define CAN1_MB24_DATA3 0xffc0370c /* CAN Controller 1 Mailbox 24 Data 3 Register */
472	#define CAN1_MB24_LENGTH 0xffc03710 /* CAN Controller 1 Mailbox 24 Length Register */
473	#define CAN1_MB24_TIMESTAMP 0xffc03714 /* CAN Controller 1 Mailbox 24 Timestamp Register */
474	#define CAN1_MB24_ID0 0xffc03718 /* CAN Controller 1 Mailbox 24 ID0 Register */
475	#define CAN1_MB24_ID1 0xffc0371c /* CAN Controller 1 Mailbox 24 ID1 Register */
476	#define CAN1_MB25_DATA0 0xffc03720 /* CAN Controller 1 Mailbox 25 Data 0 Register */
477	#define CAN1_MB25_DATA1 0xffc03724 /* CAN Controller 1 Mailbox 25 Data 1 Register */
478	#define CAN1_MB25_DATA2 0xffc03728 /* CAN Controller 1 Mailbox 25 Data 2 Register */
479	#define CAN1_MB25_DATA3 0xffc0372c /* CAN Controller 1 Mailbox 25 Data 3 Register */
480	#define CAN1_MB25_LENGTH 0xffc03730 /* CAN Controller 1 Mailbox 25 Length Register */
481	#define CAN1_MB25_TIMESTAMP 0xffc03734 /* CAN Controller 1 Mailbox 25 Timestamp Register */
482	#define CAN1_MB25_ID0 0xffc03738 /* CAN Controller 1 Mailbox 25 ID0 Register */
483	#define CAN1_MB25_ID1 0xffc0373c /* CAN Controller 1 Mailbox 25 ID1 Register */
484	#define CAN1_MB26_DATA0 0xffc03740 /* CAN Controller 1 Mailbox 26 Data 0 Register */
485	#define CAN1_MB26_DATA1 0xffc03744 /* CAN Controller 1 Mailbox 26 Data 1 Register */
486	#define CAN1_MB26_DATA2 0xffc03748 /* CAN Controller 1 Mailbox 26 Data 2 Register */
487	#define CAN1_MB26_DATA3 0xffc0374c /* CAN Controller 1 Mailbox 26 Data 3 Register */
488	#define CAN1_MB26_LENGTH 0xffc03750 /* CAN Controller 1 Mailbox 26 Length Register */
489	#define CAN1_MB26_TIMESTAMP 0xffc03754 /* CAN Controller 1 Mailbox 26 Timestamp Register */
490	#define CAN1_MB26_ID0 0xffc03758 /* CAN Controller 1 Mailbox 26 ID0 Register */
491	#define CAN1_MB26_ID1 0xffc0375c /* CAN Controller 1 Mailbox 26 ID1 Register */
492	#define CAN1_MB27_DATA0 0xffc03760 /* CAN Controller 1 Mailbox 27 Data 0 Register */
493	#define CAN1_MB27_DATA1 0xffc03764 /* CAN Controller 1 Mailbox 27 Data 1 Register */
494	#define CAN1_MB27_DATA2 0xffc03768 /* CAN Controller 1 Mailbox 27 Data 2 Register */
495	#define CAN1_MB27_DATA3 0xffc0376c /* CAN Controller 1 Mailbox 27 Data 3 Register */
496	#define CAN1_MB27_LENGTH 0xffc03770 /* CAN Controller 1 Mailbox 27 Length Register */
497	#define CAN1_MB27_TIMESTAMP 0xffc03774 /* CAN Controller 1 Mailbox 27 Timestamp Register */
498	#define CAN1_MB27_ID0 0xffc03778 /* CAN Controller 1 Mailbox 27 ID0 Register */
499	#define CAN1_MB27_ID1 0xffc0377c /* CAN Controller 1 Mailbox 27 ID1 Register */
500	#define CAN1_MB28_DATA0 0xffc03780 /* CAN Controller 1 Mailbox 28 Data 0 Register */
501	#define CAN1_MB28_DATA1 0xffc03784 /* CAN Controller 1 Mailbox 28 Data 1 Register */
502	#define CAN1_MB28_DATA2 0xffc03788 /* CAN Controller 1 Mailbox 28 Data 2 Register */
503	#define CAN1_MB28_DATA3 0xffc0378c /* CAN Controller 1 Mailbox 28 Data 3 Register */
504	#define CAN1_MB28_LENGTH 0xffc03790 /* CAN Controller 1 Mailbox 28 Length Register */
505	#define CAN1_MB28_TIMESTAMP 0xffc03794 /* CAN Controller 1 Mailbox 28 Timestamp Register */
506	#define CAN1_MB28_ID0 0xffc03798 /* CAN Controller 1 Mailbox 28 ID0 Register */
507	#define CAN1_MB28_ID1 0xffc0379c /* CAN Controller 1 Mailbox 28 ID1 Register */
508	#define CAN1_MB29_DATA0 0xffc037a0 /* CAN Controller 1 Mailbox 29 Data 0 Register */
509	#define CAN1_MB29_DATA1 0xffc037a4 /* CAN Controller 1 Mailbox 29 Data 1 Register */
510	#define CAN1_MB29_DATA2 0xffc037a8 /* CAN Controller 1 Mailbox 29 Data 2 Register */
511	#define CAN1_MB29_DATA3 0xffc037ac /* CAN Controller 1 Mailbox 29 Data 3 Register */
512	#define CAN1_MB29_LENGTH 0xffc037b0 /* CAN Controller 1 Mailbox 29 Length Register */
513	#define CAN1_MB29_TIMESTAMP 0xffc037b4 /* CAN Controller 1 Mailbox 29 Timestamp Register */
514	#define CAN1_MB29_ID0 0xffc037b8 /* CAN Controller 1 Mailbox 29 ID0 Register */
515	#define CAN1_MB29_ID1 0xffc037bc /* CAN Controller 1 Mailbox 29 ID1 Register */
516	#define CAN1_MB30_DATA0 0xffc037c0 /* CAN Controller 1 Mailbox 30 Data 0 Register */
517	#define CAN1_MB30_DATA1 0xffc037c4 /* CAN Controller 1 Mailbox 30 Data 1 Register */
518	#define CAN1_MB30_DATA2 0xffc037c8 /* CAN Controller 1 Mailbox 30 Data 2 Register */
519	#define CAN1_MB30_DATA3 0xffc037cc /* CAN Controller 1 Mailbox 30 Data 3 Register */
520	#define CAN1_MB30_LENGTH 0xffc037d0 /* CAN Controller 1 Mailbox 30 Length Register */
521	#define CAN1_MB30_TIMESTAMP 0xffc037d4 /* CAN Controller 1 Mailbox 30 Timestamp Register */
522	#define CAN1_MB30_ID0 0xffc037d8 /* CAN Controller 1 Mailbox 30 ID0 Register */
523	#define CAN1_MB30_ID1 0xffc037dc /* CAN Controller 1 Mailbox 30 ID1 Register */
524	#define CAN1_MB31_DATA0 0xffc037e0 /* CAN Controller 1 Mailbox 31 Data 0 Register */
525	#define CAN1_MB31_DATA1 0xffc037e4 /* CAN Controller 1 Mailbox 31 Data 1 Register */
526	#define CAN1_MB31_DATA2 0xffc037e8 /* CAN Controller 1 Mailbox 31 Data 2 Register */
527	#define CAN1_MB31_DATA3 0xffc037ec /* CAN Controller 1 Mailbox 31 Data 3 Register */
528	#define CAN1_MB31_LENGTH 0xffc037f0 /* CAN Controller 1 Mailbox 31 Length Register */
529	#define CAN1_MB31_TIMESTAMP 0xffc037f4 /* CAN Controller 1 Mailbox 31 Timestamp Register */
530	#define CAN1_MB31_ID0 0xffc037f8 /* CAN Controller 1 Mailbox 31 ID0 Register */
531	#define CAN1_MB31_ID1 0xffc037fc /* CAN Controller 1 Mailbox 31 ID1 Register */
532
533	/* ATAPI Registers */
534
535	#define ATAPI_CONTROL 0xffc03800 /* ATAPI Control Register */
536	#define ATAPI_STATUS 0xffc03804 /* ATAPI Status Register */
537	#define ATAPI_DEV_ADDR 0xffc03808 /* ATAPI Device Register Address */
538	#define ATAPI_DEV_TXBUF 0xffc0380c /* ATAPI Device Register Write Data */
539	#define ATAPI_DEV_RXBUF 0xffc03810 /* ATAPI Device Register Read Data */
540	#define ATAPI_INT_MASK 0xffc03814 /* ATAPI Interrupt Mask Register */
541	#define ATAPI_INT_STATUS 0xffc03818 /* ATAPI Interrupt Status Register */
542	#define ATAPI_XFER_LEN 0xffc0381c /* ATAPI Length of Transfer */
543	#define ATAPI_LINE_STATUS 0xffc03820 /* ATAPI Line Status */
544	#define ATAPI_SM_STATE 0xffc03824 /* ATAPI State Machine Status */
545	#define ATAPI_TERMINATE 0xffc03828 /* ATAPI Host Terminate */
546	#define ATAPI_PIO_TFRCNT 0xffc0382c /* ATAPI PIO mode transfer count */
547	#define ATAPI_DMA_TFRCNT 0xffc03830 /* ATAPI DMA mode transfer count */
548	#define ATAPI_UMAIN_TFRCNT 0xffc03834 /* ATAPI UDMAIN transfer count */
549	#define ATAPI_UDMAOUT_TFRCNT 0xffc03838 /* ATAPI UDMAOUT transfer count */
550	#define ATAPI_REG_TIM_0 0xffc03840 /* ATAPI Register Transfer Timing 0 */
551	#define ATAPI_PIO_TIM_0 0xffc03844 /* ATAPI PIO Timing 0 Register */
552	#define ATAPI_PIO_TIM_1 0xffc03848 /* ATAPI PIO Timing 1 Register */
553	#define ATAPI_MULTI_TIM_0 0xffc03850 /* ATAPI Multi-DMA Timing 0 Register */
554	#define ATAPI_MULTI_TIM_1 0xffc03854 /* ATAPI Multi-DMA Timing 1 Register */
555	#define ATAPI_MULTI_TIM_2 0xffc03858 /* ATAPI Multi-DMA Timing 2 Register */
556	#define ATAPI_ULTRA_TIM_0 0xffc03860 /* ATAPI Ultra-DMA Timing 0 Register */
557	#define ATAPI_ULTRA_TIM_1 0xffc03864 /* ATAPI Ultra-DMA Timing 1 Register */
558	#define ATAPI_ULTRA_TIM_2 0xffc03868 /* ATAPI Ultra-DMA Timing 2 Register */
559	#define ATAPI_ULTRA_TIM_3 0xffc0386c /* ATAPI Ultra-DMA Timing 3 Register */
560
561	/* SDH Registers */
562
563	#define SDH_PWR_CTL 0xffc03900 /* SDH Power Control */
564	#define SDH_CLK_CTL 0xffc03904 /* SDH Clock Control */
565	#define SDH_ARGUMENT 0xffc03908 /* SDH Argument */
566	#define SDH_COMMAND 0xffc0390c /* SDH Command */
567	#define SDH_RESP_CMD 0xffc03910 /* SDH Response Command */
568	#define SDH_RESPONSE0 0xffc03914 /* SDH Response0 */
569	#define SDH_RESPONSE1 0xffc03918 /* SDH Response1 */
570	#define SDH_RESPONSE2 0xffc0391c /* SDH Response2 */
571	#define SDH_RESPONSE3 0xffc03920 /* SDH Response3 */
572	#define SDH_DATA_TIMER 0xffc03924 /* SDH Data Timer */
573	#define SDH_DATA_LGTH 0xffc03928 /* SDH Data Length */
574	#define SDH_DATA_CTL 0xffc0392c /* SDH Data Control */
575	#define SDH_DATA_CNT 0xffc03930 /* SDH Data Counter */
576	#define SDH_STATUS 0xffc03934 /* SDH Status */
577	#define SDH_STATUS_CLR 0xffc03938 /* SDH Status Clear */
578	#define SDH_MASK0 0xffc0393c /* SDH Interrupt0 Mask */
579	#define SDH_MASK1 0xffc03940 /* SDH Interrupt1 Mask */
580	#define SDH_FIFO_CNT 0xffc03948 /* SDH FIFO Counter */
581	#define SDH_FIFO 0xffc03980 /* SDH Data FIFO */
582	#define SDH_E_STATUS 0xffc039c0 /* SDH Exception Status */
583	#define SDH_E_MASK 0xffc039c4 /* SDH Exception Mask */
584	#define SDH_CFG 0xffc039c8 /* SDH Configuration */
585	#define SDH_RD_WAIT_EN 0xffc039cc /* SDH Read Wait Enable */
586	#define SDH_PID0 0xffc039d0 /* SDH Peripheral Identification0 */
587	#define SDH_PID1 0xffc039d4 /* SDH Peripheral Identification1 */
588	#define SDH_PID2 0xffc039d8 /* SDH Peripheral Identification2 */
589	#define SDH_PID3 0xffc039dc /* SDH Peripheral Identification3 */
590	#define SDH_PID4 0xffc039e0 /* SDH Peripheral Identification4 */
591	#define SDH_PID5 0xffc039e4 /* SDH Peripheral Identification5 */
592	#define SDH_PID6 0xffc039e8 /* SDH Peripheral Identification6 */
593	#define SDH_PID7 0xffc039ec /* SDH Peripheral Identification7 */
594
595	/* HOST Port Registers */
596
597	#define HOST_CONTROL 0xffc03a00 /* HOSTDP Control Register */
598	#define HOST_STATUS 0xffc03a04 /* HOSTDP Status Register */
599	#define HOST_TIMEOUT 0xffc03a08 /* HOSTDP Acknowledge Mode Timeout Register */
600
601	/* USB Control Registers */
602
603	#define USB_FADDR 0xffc03c00 /* Function address register */
604	#define USB_POWER 0xffc03c04 /* Power management register */
605	#define USB_INTRTX 0xffc03c08 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
606	#define USB_INTRRX 0xffc03c0c /* Interrupt register for Rx endpoints 1 to 7 */
607	#define USB_INTRTXE 0xffc03c10 /* Interrupt enable register for IntrTx */
608	#define USB_INTRRXE 0xffc03c14 /* Interrupt enable register for IntrRx */
609	#define USB_INTRUSB 0xffc03c18 /* Interrupt register for common USB interrupts */
610	#define USB_INTRUSBE 0xffc03c1c /* Interrupt enable register for IntrUSB */
611	#define USB_FRAME 0xffc03c20 /* USB frame number */
612	#define USB_INDEX 0xffc03c24 /* Index register for selecting the indexed endpoint registers */
613	#define USB_TESTMODE 0xffc03c28 /* Enabled USB 20 test modes */
614	#define USB_GLOBINTR 0xffc03c2c /* Global Interrupt Mask register and Wakeup Exception Interrupt */
615	#define USB_GLOBAL_CTL 0xffc03c30 /* Global Clock Control for the core */
616
617	/* USB Packet Control Registers */
618
619	#define USB_TX_MAX_PACKET 0xffc03c40 /* Maximum packet size for Host Tx endpoint */
620	#define USB_CSR0 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
621	#define USB_TXCSR 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
622	#define USB_RX_MAX_PACKET 0xffc03c48 /* Maximum packet size for Host Rx endpoint */
623	#define USB_RXCSR 0xffc03c4c /* Control Status register for Host Rx endpoint */
624	#define USB_COUNT0 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
625	#define USB_RXCOUNT 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
626	#define USB_TXTYPE 0xffc03c54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
627	#define USB_NAKLIMIT0 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
628	#define USB_TXINTERVAL 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
629	#define USB_RXTYPE 0xffc03c5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
630	#define USB_RXINTERVAL 0xffc03c60 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
631	#define USB_TXCOUNT 0xffc03c68 /* Number of bytes to be written to the selected endpoint Tx FIFO */
632
633	/* USB Endpoint FIFO Registers */
634
635	#define USB_EP0_FIFO 0xffc03c80 /* Endpoint 0 FIFO */
636	#define USB_EP1_FIFO 0xffc03c88 /* Endpoint 1 FIFO */
637	#define USB_EP2_FIFO 0xffc03c90 /* Endpoint 2 FIFO */
638	#define USB_EP3_FIFO 0xffc03c98 /* Endpoint 3 FIFO */
639	#define USB_EP4_FIFO 0xffc03ca0 /* Endpoint 4 FIFO */
640	#define USB_EP5_FIFO 0xffc03ca8 /* Endpoint 5 FIFO */
641	#define USB_EP6_FIFO 0xffc03cb0 /* Endpoint 6 FIFO */
642	#define USB_EP7_FIFO 0xffc03cb8 /* Endpoint 7 FIFO */
643
644	/* USB OTG Control Registers */
645
646	#define USB_OTG_DEV_CTL 0xffc03d00 /* OTG Device Control Register */
647	#define USB_OTG_VBUS_IRQ 0xffc03d04 /* OTG VBUS Control Interrupts */
648	#define USB_OTG_VBUS_MASK 0xffc03d08 /* VBUS Control Interrupt Enable */
649
650	/* USB Phy Control Registers */
651
652	#define USB_LINKINFO 0xffc03d48 /* Enables programming of some PHY-side delays */
653	#define USB_VPLEN 0xffc03d4c /* Determines duration of VBUS pulse for VBUS charging */
654	#define USB_HS_EOF1 0xffc03d50 /* Time buffer for High-Speed transactions */
655	#define USB_FS_EOF1 0xffc03d54 /* Time buffer for Full-Speed transactions */
656	#define USB_LS_EOF1 0xffc03d58 /* Time buffer for Low-Speed transactions */
657
658	/* (APHY_CNTRL is for ADI usage only) */
659
660	#define USB_APHY_CNTRL 0xffc03de0 /* Register that increases visibility of Analog PHY */
661
662	/* (APHY_CALIB is for ADI usage only) */
663
664	#define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */
665	#define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
666
667	/* (PHY_TEST is for ADI usage only) */
668
669	#define USB_PHY_TEST 0xffc03dec /* Used for reducing simulation time and simplifies FIFO testability */
670	#define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */
671	#define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */
672
673	/* USB Endpoint 0 Control Registers */
674
675	#define USB_EP_NI0_TXMAXP 0xffc03e00 /* Maximum packet size for Host Tx endpoint0 */
676	#define USB_EP_NI0_TXCSR 0xffc03e04 /* Control Status register for endpoint 0 */
677	#define USB_EP_NI0_RXMAXP 0xffc03e08 /* Maximum packet size for Host Rx endpoint0 */
678	#define USB_EP_NI0_RXCSR 0xffc03e0c /* Control Status register for Host Rx endpoint0 */
679	#define USB_EP_NI0_RXCOUNT 0xffc03e10 /* Number of bytes received in endpoint 0 FIFO */
680	#define USB_EP_NI0_TXTYPE 0xffc03e14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
681	#define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */
682	#define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
683	#define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
684
685	/* USB Endpoint 1 Control Registers */
686
687	#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */
688	#define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */
689	#define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */
690	#define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */
691	#define USB_EP_NI1_RXCSR 0xffc03e4c /* Control Status register for Host Rx endpoint1 */
692	#define USB_EP_NI1_RXCOUNT 0xffc03e50 /* Number of bytes received in endpoint1 FIFO */
693	#define USB_EP_NI1_TXTYPE 0xffc03e54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
694	#define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */
695	#define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
696	#define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
697
698	/* USB Endpoint 2 Control Registers */
699
700	#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
701	#define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */
702	#define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */
703	#define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */
704	#define USB_EP_NI2_RXCSR 0xffc03e8c /* Control Status register for Host Rx endpoint2 */
705	#define USB_EP_NI2_RXCOUNT 0xffc03e90 /* Number of bytes received in endpoint2 FIFO */
706	#define USB_EP_NI2_TXTYPE 0xffc03e94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
707	#define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */
708	#define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
709	#define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
710
711	/* USB Endpoint 3 Control Registers */
712
713	#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */
714	#define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */
715	#define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */
716	#define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */
717	#define USB_EP_NI3_RXCSR 0xffc03ecc /* Control Status register for Host Rx endpoint3 */
718	#define USB_EP_NI3_RXCOUNT 0xffc03ed0 /* Number of bytes received in endpoint3 FIFO */
719	#define USB_EP_NI3_TXTYPE 0xffc03ed4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
720	#define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */
721	#define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
722	#define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
723
724	/* USB Endpoint 4 Control Registers */
725
726	#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
727	#define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */
728	#define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */
729	#define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */
730	#define USB_EP_NI4_RXCSR 0xffc03f0c /* Control Status register for Host Rx endpoint4 */
731	#define USB_EP_NI4_RXCOUNT 0xffc03f10 /* Number of bytes received in endpoint4 FIFO */
732	#define USB_EP_NI4_TXTYPE 0xffc03f14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
733	#define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */
734	#define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
735	#define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
736
737	/* USB Endpoint 5 Control Registers */
738
739	#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */
740	#define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */
741	#define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */
742	#define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */
743	#define USB_EP_NI5_RXCSR 0xffc03f4c /* Control Status register for Host Rx endpoint5 */
744	#define USB_EP_NI5_RXCOUNT 0xffc03f50 /* Number of bytes received in endpoint5 FIFO */
745	#define USB_EP_NI5_TXTYPE 0xffc03f54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
746	#define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */
747	#define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
748	#define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
749
750	/* USB Endpoint 6 Control Registers */
751
752	#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */
753	#define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */
754	#define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */
755	#define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */
756	#define USB_EP_NI6_RXCSR 0xffc03f8c /* Control Status register for Host Rx endpoint6 */
757	#define USB_EP_NI6_RXCOUNT 0xffc03f90 /* Number of bytes received in endpoint6 FIFO */
758	#define USB_EP_NI6_TXTYPE 0xffc03f94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
759	#define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */
760	#define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
761	#define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
762
763	/* USB Endpoint 7 Control Registers */
764
765	#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */
766	#define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */
767	#define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */
768	#define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */
769	#define USB_EP_NI7_RXCSR 0xffc03fcc /* Control Status register for Host Rx endpoint7 */
770	#define USB_EP_NI7_RXCOUNT 0xffc03fd0 /* Number of bytes received in endpoint7 FIFO */
771	#define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
772	#define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */
773	#define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
774	#define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
775	#define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */
776	#define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */
777
778	/* USB Channel 0 Config Registers */
779
780	#define USB_DMA0CONTROL 0xffc04004 /* DMA master channel 0 configuration */
781	#define USB_DMA0ADDRLOW 0xffc04008 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
782	#define USB_DMA0ADDRHIGH 0xffc0400c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
783	#define USB_DMA0COUNTLOW 0xffc04010 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
784	#define USB_DMA0COUNTHIGH 0xffc04014 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
785
786	/* USB Channel 1 Config Registers */
787
788	#define USB_DMA1CONTROL 0xffc04024 /* DMA master channel 1 configuration */
789	#define USB_DMA1ADDRLOW 0xffc04028 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
790	#define USB_DMA1ADDRHIGH 0xffc0402c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
791	#define USB_DMA1COUNTLOW 0xffc04030 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
792	#define USB_DMA1COUNTHIGH 0xffc04034 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
793
794	/* USB Channel 2 Config Registers */
795
796	#define USB_DMA2CONTROL 0xffc04044 /* DMA master channel 2 configuration */
797	#define USB_DMA2ADDRLOW 0xffc04048 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
798	#define USB_DMA2ADDRHIGH 0xffc0404c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
799	#define USB_DMA2COUNTLOW 0xffc04050 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
800	#define USB_DMA2COUNTHIGH 0xffc04054 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
801
802	/* USB Channel 3 Config Registers */
803
804	#define USB_DMA3CONTROL 0xffc04064 /* DMA master channel 3 configuration */
805	#define USB_DMA3ADDRLOW 0xffc04068 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
806	#define USB_DMA3ADDRHIGH 0xffc0406c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
807	#define USB_DMA3COUNTLOW 0xffc04070 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
808	#define USB_DMA3COUNTHIGH 0xffc04074 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
809
810	/* USB Channel 4 Config Registers */
811
812	#define USB_DMA4CONTROL 0xffc04084 /* DMA master channel 4 configuration */
813	#define USB_DMA4ADDRLOW 0xffc04088 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
814	#define USB_DMA4ADDRHIGH 0xffc0408c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
815	#define USB_DMA4COUNTLOW 0xffc04090 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
816	#define USB_DMA4COUNTHIGH 0xffc04094 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
817
818	/* USB Channel 5 Config Registers */
819
820	#define USB_DMA5CONTROL 0xffc040a4 /* DMA master channel 5 configuration */
821	#define USB_DMA5ADDRLOW 0xffc040a8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
822	#define USB_DMA5ADDRHIGH 0xffc040ac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
823	#define USB_DMA5COUNTLOW 0xffc040b0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
824	#define USB_DMA5COUNTHIGH 0xffc040b4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
825
826	/* USB Channel 6 Config Registers */
827
828	#define USB_DMA6CONTROL 0xffc040c4 /* DMA master channel 6 configuration */
829	#define USB_DMA6ADDRLOW 0xffc040c8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
830	#define USB_DMA6ADDRHIGH 0xffc040cc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
831	#define USB_DMA6COUNTLOW 0xffc040d0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
832	#define USB_DMA6COUNTHIGH 0xffc040d4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
833
834	/* USB Channel 7 Config Registers */
835
836	#define USB_DMA7CONTROL 0xffc040e4 /* DMA master channel 7 configuration */
837	#define USB_DMA7ADDRLOW 0xffc040e8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
838	#define USB_DMA7ADDRHIGH 0xffc040ec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
839	#define USB_DMA7COUNTLOW 0xffc040f0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
840	#define USB_DMA7COUNTHIGH 0xffc040f4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
841
842	/* Keypad Registers */
843
844	#define KPAD_CTL 0xffc04100 /* Controls keypad module enable and disable */
845	#define KPAD_PRESCALE 0xffc04104 /* Establish a time base for programing the KPAD_MSEL register */
846	#define KPAD_MSEL 0xffc04108 /* Selects delay parameters for keypad interface sensitivity */
847	#define KPAD_ROWCOL 0xffc0410c /* Captures the row and column output values of the keys pressed */
848	#define KPAD_STAT 0xffc04110 /* Holds and clears the status of the keypad interface interrupt */
849	#define KPAD_SOFTEVAL 0xffc04114 /* Lets software force keypad interface to check for keys being pressed */
850
851	/* Pixel Compositor (PIXC) Registers */
852
853	#define PIXC_CTL 0xffc04400 /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */
854	#define PIXC_PPL 0xffc04404 /* Holds the number of pixels per line of the display */
855	#define PIXC_LPF 0xffc04408 /* Holds the number of lines per frame of the display */
856	#define PIXC_AHSTART 0xffc0440c /* Contains horizontal start pixel information of the overlay data (set A) */
857	#define PIXC_AHEND 0xffc04410 /* Contains horizontal end pixel information of the overlay data (set A) */
858	#define PIXC_AVSTART 0xffc04414 /* Contains vertical start pixel information of the overlay data (set A) */
859	#define PIXC_AVEND 0xffc04418 /* Contains vertical end pixel information of the overlay data (set A) */
860	#define PIXC_ATRANSP 0xffc0441c /* Contains the transparency ratio (set A) */
861	#define PIXC_BHSTART 0xffc04420 /* Contains horizontal start pixel information of the overlay data (set B) */
862	#define PIXC_BHEND 0xffc04424 /* Contains horizontal end pixel information of the overlay data (set B) */
863	#define PIXC_BVSTART 0xffc04428 /* Contains vertical start pixel information of the overlay data (set B) */
864	#define PIXC_BVEND 0xffc0442c /* Contains vertical end pixel information of the overlay data (set B) */
865	#define PIXC_BTRANSP 0xffc04430 /* Contains the transparency ratio (set B) */
866	#define PIXC_INTRSTAT 0xffc0443c /* Overlay interrupt configuration/status */
867	#define PIXC_RYCON 0xffc04440 /* Color space conversion matrix register. Contains the R/Y conversion coefficients */
868	#define PIXC_GUCON 0xffc04444 /* Color space conversion matrix register. Contains the G/U conversion coefficients */
869	#define PIXC_BVCON 0xffc04448 /* Color space conversion matrix register. Contains the B/V conversion coefficients */
870	#define PIXC_CCBIAS 0xffc0444c /* Bias values for the color space conversion matrix */
871	#define PIXC_TC 0xffc04450 /* Holds the transparent color value */
872
873	/* ********************************************************** */
874	/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
875	/* and MULTI BIT READ MACROS */
876	/* ********************************************************** */
877
878	/* Bit masks for PIXC_CTL */
879
880	#define PIXC_EN 0x1 /* Pixel Compositor Enable */
881	#define nPIXC_EN 0x0
882	#define OVR_A_EN 0x2 /* Overlay A Enable */
883	#define nOVR_A_EN 0x0
884	#define OVR_B_EN 0x4 /* Overlay B Enable */
885	#define nOVR_B_EN 0x0
886	#define IMG_FORM 0x8 /* Image Data Format */
887	#define nIMG_FORM 0x0
888	#define OVR_FORM 0x10 /* Overlay Data Format */
889	#define nOVR_FORM 0x0
890	#define OUT_FORM 0x20 /* Output Data Format */
891	#define nOUT_FORM 0x0
892	#define UDS_MOD 0x40 /* Resampling Mode */
893	#define nUDS_MOD 0x0
894	#define TC_EN 0x80 /* Transparent Color Enable */
895	#define nTC_EN 0x0
896	#define IMG_STAT 0x300 /* Image FIFO Status */
897	#define OVR_STAT 0xc00 /* Overlay FIFO Status */
898	#define WM_LVL 0x3000 /* FIFO Watermark Level */
899
900	/* Bit masks for PIXC_AHSTART */
901
902	#define A_HSTART 0xfff /* Horizontal Start Coordinates */
903
904	/* Bit masks for PIXC_AHEND */
905
906	#define A_HEND 0xfff /* Horizontal End Coordinates */
907
908	/* Bit masks for PIXC_AVSTART */
909
910	#define A_VSTART 0x3ff /* Vertical Start Coordinates */
911
912	/* Bit masks for PIXC_AVEND */
913
914	#define A_VEND 0x3ff /* Vertical End Coordinates */
915
916	/* Bit masks for PIXC_ATRANSP */
917
918	#define A_TRANSP 0xf /* Transparency Value */
919
920	/* Bit masks for PIXC_BHSTART */
921
922	#define B_HSTART 0xfff /* Horizontal Start Coordinates */
923
924	/* Bit masks for PIXC_BHEND */
925
926	#define B_HEND 0xfff /* Horizontal End Coordinates */
927
928	/* Bit masks for PIXC_BVSTART */
929
930	#define B_VSTART 0x3ff /* Vertical Start Coordinates */
931
932	/* Bit masks for PIXC_BVEND */
933
934	#define B_VEND 0x3ff /* Vertical End Coordinates */
935
936	/* Bit masks for PIXC_BTRANSP */
937
938	#define B_TRANSP 0xf /* Transparency Value */
939
940	/* Bit masks for PIXC_INTRSTAT */
941
942	#define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */
943	#define nOVR_INT_EN 0x0
944	#define FRM_INT_EN 0x2 /* Interrupt at End of Frame */
945	#define nFRM_INT_EN 0x0
946	#define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */
947	#define nOVR_INT_STAT 0x0
948	#define FRM_INT_STAT 0x8 /* Frame Interrupt Status */
949	#define nFRM_INT_STAT 0x0
950
951	/* Bit masks for PIXC_RYCON */
952
953	#define A11 0x3ff /* A11 in the Coefficient Matrix */
954	#define A12 0xffc00 /* A12 in the Coefficient Matrix */
955	#define A13 0x3ff00000 /* A13 in the Coefficient Matrix */
956	#define RY_MULT4 0x40000000 /* Multiply Row by 4 */
957	#define nRY_MULT4 0x0
958
959	/* Bit masks for PIXC_GUCON */
960
961	#define A21 0x3ff /* A21 in the Coefficient Matrix */
962	#define A22 0xffc00 /* A22 in the Coefficient Matrix */
963	#define A23 0x3ff00000 /* A23 in the Coefficient Matrix */
964	#define GU_MULT4 0x40000000 /* Multiply Row by 4 */
965	#define nGU_MULT4 0x0
966
967	/* Bit masks for PIXC_BVCON */
968
969	#define A31 0x3ff /* A31 in the Coefficient Matrix */
970	#define A32 0xffc00 /* A32 in the Coefficient Matrix */
971	#define A33 0x3ff00000 /* A33 in the Coefficient Matrix */
972	#define BV_MULT4 0x40000000 /* Multiply Row by 4 */
973	#define nBV_MULT4 0x0
974
975	/* Bit masks for PIXC_CCBIAS */
976
977	#define A14 0x3ff /* A14 in the Bias Vector */
978	#define A24 0xffc00 /* A24 in the Bias Vector */
979	#define A34 0x3ff00000 /* A34 in the Bias Vector */
980
981	/* Bit masks for PIXC_TC */
982
983	#define RY_TRANS 0xff /* Transparent Color - R/Y Component */
984	#define GU_TRANS 0xff00 /* Transparent Color - G/U Component */
985	#define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */
986
987	/* Bit masks for HOST_CONTROL */
988
989	#define HOSTDP_EN 0x1 /* HOSTDP Enable */
990	#define nHOSTDP_EN 0x0
991	#define HOSTDP_END 0x2 /* Host Endianess */
992	#define nHOSTDP_END 0x0
993	#define HOSTDP_DATA_SIZE 0x4 /* Data Size */
994	#define nHOSTDP_DATA_SIZE 0x0
995	#define HOSTDP_RST 0x8 /* HOSTDP Reset */
996	#define nHOSTDP_RST 0x0
997	#define HRDY_OVR 0x20 /* HRDY Override */
998	#define nHRDY_OVR 0x0
999	#define INT_MODE 0x40 /* Interrupt Mode */
1000	#define nINT_MODE 0x0
1001	#define BT_EN 0x80 /* Bus Timeout Enable */
1002	#define nBT_EN 0x0
1003	#define EHW 0x100 /* Enable Host Write */
1004	#define nEHW 0x0
1005	#define EHR 0x200 /* Enable Host Read */
1006	#define nEHR 0x0
1007	#define BDR 0x400 /* Burst DMA Requests */
1008	#define nBDR 0x0
1009
1010	/* Bit masks for HOST_STATUS */
1011
1012	#define DMA_RDY 0x1 /* DMA Ready */
1013	#define nDMA_RDY 0x0
1014	#define FIFOFULL 0x2 /* FIFO Full */
1015	#define nFIFOFULL 0x0
1016	#define FIFOEMPTY 0x4 /* FIFO Empty */
1017	#define nFIFOEMPTY 0x0
1018	#define DMA_CMPLT 0x8 /* DMA Complete */
1019	#define nDMA_CMPLT 0x0
1020	#define HSHK 0x10 /* Host Handshake */
1021	#define nHSHK 0x0
1022	#define HOSTDP_TOUT 0x20 /* HOSTDP Timeout */
1023	#define nHOSTDP_TOUT 0x0
1024	#define HIRQ 0x40 /* Host Interrupt Request */
1025	#define nHIRQ 0x0
1026	#define ALLOW_CNFG 0x80 /* Allow New Configuration */
1027	#define nALLOW_CNFG 0x0
1028	#define DMA_DIR 0x100 /* DMA Direction */
1029	#define nDMA_DIR 0x0
1030	#define BTE 0x200 /* Bus Timeout Enabled */
1031	#define nBTE 0x0
1032
1033	/* Bit masks for HOST_TIMEOUT */
1034
1035	#define COUNT_TIMEOUT 0x7ff /* HOSTDP Timeout count */
1036
1037	/* Bit masks for KPAD_CTL */
1038
1039	#define KPAD_EN 0x1 /* Keypad Enable */
1040	#define nKPAD_EN 0x0
1041	#define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */
1042	#define nKPAD_IRQMODE 0x0 /* Interrupt Disabled */
1043	#define KPAD_IRQMODE_SK 0x2 /* Single key (single row, single column) press interrupt enable */
1044	#define KPAD_IRQMODE_MK 0x4 /* Single key press multiple key press interrupt enable */
1045
1046	#define KPAD_ROWEN 0x1c00 /* Row Enable Width */
1047	#define KPAD_COLEN 0xe000 /* Column Enable Width */
1048
1049	#ifdef _MISRA_RULES
1050	#define SET_KPAD_ROWEN(x) (((x)&0x7u)<<10) /* 000: row 0 enabled, 111: rows 0-7 enabled */
1051	#define SET_KPAD_COLEN(x) (((x)&0x7u)<<13) /* 000: column 0 enabled, 111: columns 0-7 enabled */
1052	#else
1053	#define SET_KPAD_ROWEN(x) (((x)&0x7)<<10) /* 000: row 0 enabled, 111: rows 0-7 enabled */
1054	#define SET_KPAD_COLEN(x) (((x)&0x7)<<13) /* 000: column 0 enabled, 111: columns 0-7 enabled */
1055	#endif /* _MISRA_RULES */
1056
1057
1058	/* Bit masks for KPAD_PRESCALE */
1059
1060	#define KPAD_PRESCALE_VAL 0x3f /* Key Prescale Value */
1061
1062	#ifdef _MISRA_RULES
1063	#define SET_KPAD_PRESCALE(x) ((x)&0x3Fu) /* KPAD_PRESCALE_VAL (Key Prescale). Key Prescale Value (5:0) */
1064	#else
1065	#define SET_KPAD_PRESCALE(x) ((x)&0x3F) /* KPAD_PRESCALE_VAL (Key Prescale). Key Prescale Value (5:0) */
1066	#endif /* _MISRA_RULES */
1067
1068
1069	/* Bit masks for KPAD_MSEL */
1070
1071	#define DBON_SCALE 0xff /* Debounce Scale Value */
1072	#define COLDRV_SCALE 0xff00 /* Column Driver Scale Value */
1073
1074	#ifdef _MISRA_RULES
1075	#define SET_KPAD_DBON_SCALE(x) ((x)&0xFFu) /* DBON_SCALE (Debounce Scale). Debounce Delay Multiplier Select [7:0] */
1076	#define SET_KPAD_COLDRV_SCALE(x) (((x)&0xFFu)<<8) /* COLDRV_SCALE (Column Driver Scale). Column Driver Period Multiplier Select [15:8] */
1077	#else
1078	#define SET_KPAD_DBON_SCALE(x) ((x)&0xFF) /* DBON_SCALE (Debounce Scale). Debounce Delay Multiplier Select [7:0] */
1079	#define SET_KPAD_COLDRV_SCALE(x) (((x)&0xFF)<<8) /* COLDRV_SCALE (Column Driver Scale). Column Driver Period Multiplier Select [15:8] */
1080	#endif /* _MISRA_RULES */
1081
1082
1083	/* Bit masks for KPAD_ROWCOL */
1084
1085	#define KPAD_ROW 0xff /* Rows Pressed */
1086	#define KPAD_COL 0xff00 /* Columns Pressed */
1087
1088	/* Bit masks for KPAD_STAT */
1089
1090	#define KPAD_IRQ 0x1 /* Keypad Interrupt Status */
1091	#define nKPAD_IRQ 0x0
1092	#define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */
1093	#define KPAD_PRESSED 0x8 /* Key press current status */
1094	#define nKPAD_PRESSED 0x0
1095
1096	/* Bit masks for KPAD_SOFTEVAL */
1097
1098	#define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */
1099	#define nKPAD_SOFTEVAL_E 0x0
1100	#define KPAD_NO_KEY 0x0 /* No Keypress Status*/
1101	#define KPAD_SINGLE_KEY 0x2 /* Single Keypress Status */
1102	#define KPAD_MKSROWCOL 0x4 /* Multiple Keypress in the same row or column Status */
1103	#define KPAD_MKMROWCOL 0x6 /* Multiple Keypress in the same multiple rows and multiple columns Status */
1104
1105	/* Bit masks for SDH_COMMAND */
1106
1107	#define CMD_IDX 0x3f /* Command Index */
1108	#define CMD_RSP 0x40 /* Response */
1109	#define nCMD_RSP 0x0
1110	#define CMD_L_RSP 0x80 /* Long Response */
1111	#define nCMD_L_RSP 0x0
1112	#define CMD_INT_E 0x100 /* Command Interrupt */
1113	#define nCMD_INT_E 0x0
1114	#define CMD_PEND_E 0x200 /* Command Pending */
1115	#define nCMD_PEND_E 0x0
1116	#define CMD_E 0x400 /* Command Enable */
1117	#define nCMD_E 0x0
1118
1119	/* Bit masks for SDH_PWR_CTL */
1120
1121	#define PWR_ON 0x3 /* Power On */
1122	#if 0
1123	#define TBD 0x3c /* TBD */
1124	#endif
1125	#define SD_CMD_OD 0x40 /* Open Drain Output */
1126	#define nSD_CMD_OD 0x0
1127	#define ROD_CTL 0x80 /* Rod Control */
1128	#define nROD_CTL 0x0
1129
1130	/* Bit masks for SDH_CLK_CTL */
1131
1132	#define CLKDIV 0xff /* MC_CLK Divisor */
1133	#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */
1134	#define nCLK_E 0x0
1135	#define PWR_SV_E 0x200 /* Power Save Enable */
1136	#define nPWR_SV_E 0x0
1137	#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */
1138	#define nCLKDIV_BYPASS 0x0
1139	#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */
1140	#define nWIDE_BUS 0x0
1141
1142	/* Bit masks for SDH_RESP_CMD */
1143
1144	#define RESP_CMD 0x3f /* Response Command */
1145
1146	/* Bit masks for SDH_DATA_CTL */
1147
1148	#define DTX_E 0x1 /* Data Transfer Enable */
1149	#define nDTX_E 0x0
1150	#define DTX_DIR 0x2 /* Data Transfer Direction */
1151	#define nDTX_DIR 0x0
1152	#define DTX_MODE 0x4 /* Data Transfer Mode */
1153	#define nDTX_MODE 0x0
1154	#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */
1155	#define nDTX_DMA_E 0x0
1156	#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */
1157
1158	/* Bit masks for SDH_STATUS */
1159
1160	#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */
1161	#define nCMD_CRC_FAIL 0x0
1162	#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */
1163	#define nDAT_CRC_FAIL 0x0
1164	#define CMD_TIMEOUT 0x4 /* CMD Time Out */
1165	#define nCMD_TIMEOUT 0x0
1166	#define DAT_TIMEOUT 0x8 /* Data Time Out */
1167	#define nDAT_TIMEOUT 0x0
1168	#define TX_UNDERRUN 0x10 /* Transmit Underrun */
1169	#define nTX_UNDERRUN 0x0
1170	#define RX_OVERRUN 0x20 /* Receive Overrun */
1171	#define nRX_OVERRUN 0x0
1172	#define CMD_RESP_END 0x40 /* CMD Response End */
1173	#define nCMD_RESP_END 0x0
1174	#define CMD_SENT 0x80 /* CMD Sent */
1175	#define nCMD_SENT 0x0
1176	#define DAT_END 0x100 /* Data End */
1177	#define nDAT_END 0x0
1178	#define START_BIT_ERR 0x200 /* Start Bit Error */
1179	#define nSTART_BIT_ERR 0x0
1180	#define DAT_BLK_END 0x400 /* Data Block End */
1181	#define nDAT_BLK_END 0x0
1182	#define CMD_ACT 0x800 /* CMD Active */
1183	#define nCMD_ACT 0x0
1184	#define TX_ACT 0x1000 /* Transmit Active */
1185	#define nTX_ACT 0x0
1186	#define RX_ACT 0x2000 /* Receive Active */
1187	#define nRX_ACT 0x0
1188	#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */
1189	#define nTX_FIFO_STAT 0x0
1190	#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */
1191	#define nRX_FIFO_STAT 0x0
1192	#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */
1193	#define nTX_FIFO_FULL 0x0
1194	#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */
1195	#define nRX_FIFO_FULL 0x0
1196	#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */
1197	#define nTX_FIFO_ZERO 0x0
1198	#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */
1199	#define nRX_DAT_ZERO 0x0
1200	#define TX_DAT_RDY 0x100000 /* Transmit Data Available */
1201	#define nTX_DAT_RDY 0x0
1202	#define RX_FIFO_RDY 0x200000 /* Receive Data Available */
1203	#define nRX_FIFO_RDY 0x0
1204
1205	/* Bit masks for SDH_STATUS_CLR */
1206
1207	#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */
1208	#define nCMD_CRC_FAIL_STAT 0x0
1209	#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */
1210	#define nDAT_CRC_FAIL_STAT 0x0
1211	#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */
1212	#define nCMD_TIMEOUT_STAT 0x0
1213	#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */
1214	#define nDAT_TIMEOUT_STAT 0x0
1215	#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */
1216	#define nTX_UNDERRUN_STAT 0x0
1217	#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */
1218	#define nRX_OVERRUN_STAT 0x0
1219	#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */
1220	#define nCMD_RESP_END_STAT 0x0
1221	#define CMD_SENT_STAT 0x80 /* CMD Sent Status */
1222	#define nCMD_SENT_STAT 0x0
1223	#define DAT_END_STAT 0x100 /* Data End Status */
1224	#define nDAT_END_STAT 0x0
1225	#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */
1226	#define nSTART_BIT_ERR_STAT 0x0
1227	#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */
1228	#define nDAT_BLK_END_STAT 0x0
1229
1230	/* Bit masks for SDH_MASK0 */
1231
1232	#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */
1233	#define nCMD_CRC_FAIL_MASK 0x0
1234	#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */
1235	#define nDAT_CRC_FAIL_MASK 0x0
1236	#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */
1237	#define nCMD_TIMEOUT_MASK 0x0
1238	#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */
1239	#define nDAT_TIMEOUT_MASK 0x0
1240	#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */
1241	#define nTX_UNDERRUN_MASK 0x0
1242	#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */
1243	#define nRX_OVERRUN_MASK 0x0
1244	#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */
1245	#define nCMD_RESP_END_MASK 0x0
1246	#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */
1247	#define nCMD_SENT_MASK 0x0
1248	#define DAT_END_MASK 0x100 /* Data End Mask */
1249	#define nDAT_END_MASK 0x0
1250	#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */
1251	#define nSTART_BIT_ERR_MASK 0x0
1252	#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */
1253	#define nDAT_BLK_END_MASK 0x0
1254	#define CMD_ACT_MASK 0x800 /* CMD Active Mask */
1255	#define nCMD_ACT_MASK 0x0
1256	#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */
1257	#define nTX_ACT_MASK 0x0
1258	#define RX_ACT_MASK 0x2000 /* Receive Active Mask */
1259	#define nRX_ACT_MASK 0x0
1260	#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */
1261	#define nTX_FIFO_STAT_MASK 0x0
1262	#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */
1263	#define nRX_FIFO_STAT_MASK 0x0
1264	#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */
1265	#define nTX_FIFO_FULL_MASK 0x0
1266	#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */
1267	#define nRX_FIFO_FULL_MASK 0x0
1268	#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */
1269	#define nTX_FIFO_ZERO_MASK 0x0
1270	#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */
1271	#define nRX_DAT_ZERO_MASK 0x0
1272	#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */
1273	#define nTX_DAT_RDY_MASK 0x0
1274	#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */
1275	#define nRX_FIFO_RDY_MASK 0x0
1276
1277	/* Bit masks for SDH_FIFO_CNT */
1278
1279	#define FIFO_COUNT 0x7fff /* FIFO Count */
1280
1281	/* Bit masks for SDH_E_STATUS */
1282
1283	#define SDIO_INT_DET 0x2 /* SDIO Int Detected */
1284	#define nSDIO_INT_DET 0x0
1285	#define SD_CARD_DET 0x10 /* SD Card Detect */
1286	#define nSD_CARD_DET 0x0
1287
1288	/* Bit masks for SDH_E_MASK */
1289
1290	#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */
1291	#define nSDIO_MSK 0x0
1292	#define SCD_MSK 0x40 /* Mask Card Detect */
1293	#define nSCD_MSK 0x0
1294
1295	/* Bit masks for SDH_CFG */
1296
1297	#define CLKS_EN 0x1 /* Clocks Enable */
1298	#define nCLKS_EN 0x0
1299	#define SD4E 0x4 /* SDIO 4-Bit Enable */
1300	#define nSD4E 0x0
1301	#define MWE 0x8 /* Moving Window Enable */
1302	#define nMWE 0x0
1303	#define SD_RST 0x10 /* SDMMC Reset */
1304	#define nSD_RST 0x0
1305	#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */
1306	#define nPUP_SDDAT 0x0
1307	#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */
1308	#define nPUP_SDDAT3 0x0
1309	#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */
1310	#define nPD_SDDAT3 0x0
1311
1312	/* Bit masks for SDH_RD_WAIT_EN */
1313
1314	#define RWR 0x1 /* Read Wait Request */
1315	#define nRWR 0x0
1316
1317	/* Bit masks for ATAPI_CONTROL */
1318
1319	#define PIO_START 0x1 /* Start PIO/Reg Op */
1320	#define nPIO_START 0x0
1321	#define MULTI_START 0x2 /* Start Multi-DMA Op */
1322	#define nMULTI_START 0x0
1323	#define ULTRA_START 0x4 /* Start Ultra-DMA Op */
1324	#define nULTRA_START 0x0
1325	#define XFER_DIR 0x8 /* Transfer Direction */
1326	#define nXFER_DIR 0x0
1327	#define IORDY_EN 0x10 /* IORDY Enable */
1328	#define nIORDY_EN 0x0
1329	#define FIFO_FLUSH 0x20 /* Flush FIFOs */
1330	#define nFIFO_FLUSH 0x0
1331	#define SOFT_RST 0x40 /* Soft Reset */
1332	#define nSOFT_RST 0x0
1333	#define DEV_RST 0x80 /* Device Reset */
1334	#define nDEV_RST 0x0
1335	#define TFRCNT_RST 0x100 /* Trans Count Reset */
1336	#define nTFRCNT_RST 0x0
1337	#define END_ON_TERM 0x200 /* End/Terminate Select */
1338	#define nEND_ON_TERM 0x0
1339	#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */
1340	#define nPIO_USE_DMA 0x0
1341	#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */
1342
1343	/* Bit masks for ATAPI_STATUS */
1344
1345	#define PIO_XFER_ON 0x1 /* PIO transfer in progress */
1346	#define nPIO_XFER_ON 0x0
1347	#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */
1348	#define nMULTI_XFER_ON 0x0
1349	#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */
1350	#define nULTRA_XFER_ON 0x0
1351	#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */
1352
1353	/* Bit masks for ATAPI_DEV_ADDR */
1354
1355	#define DEV_ADDR 0x1f /* Device Address */
1356
1357	/* Bit masks for ATAPI_INT_MASK */
1358
1359	#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */
1360	#define nATAPI_DEV_INT_MASK 0x0
1361	#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */
1362	#define nPIO_DONE_MASK 0x0
1363	#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */
1364	#define nMULTI_DONE_MASK 0x0
1365	#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */
1366	#define nUDMAIN_DONE_MASK 0x0
1367	#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */
1368	#define nUDMAOUT_DONE_MASK 0x0
1369	#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */
1370	#define nHOST_TERM_XFER_MASK 0x0
1371	#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */
1372	#define nMULTI_TERM_MASK 0x0
1373	#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */
1374	#define nUDMAIN_TERM_MASK 0x0
1375	#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */
1376	#define nUDMAOUT_TERM_MASK 0x0
1377
1378	/* Bit masks for ATAPI_INT_STATUS */
1379
1380	#define ATAPI_DEV_INT 0x1 /* Device interrupt status */
1381	#define nATAPI_DEV_INT 0x0
1382	#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */
1383	#define nPIO_DONE_INT 0x0
1384	#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */
1385	#define nMULTI_DONE_INT 0x0
1386	#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */
1387	#define nUDMAIN_DONE_INT 0x0
1388	#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */
1389	#define nUDMAOUT_DONE_INT 0x0
1390	#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */
1391	#define nHOST_TERM_XFER_INT 0x0
1392	#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */
1393	#define nMULTI_TERM_INT 0x0
1394	#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */
1395	#define nUDMAIN_TERM_INT 0x0
1396	#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */
1397	#define nUDMAOUT_TERM_INT 0x0
1398
1399	/* Bit masks for ATAPI_LINE_STATUS */
1400
1401	#define ATAPI_INTR 0x1 /* Device interrupt to host line status */
1402	#define nATAPI_INTR 0x0
1403	#define ATAPI_DASP 0x2 /* Device dasp to host line status */
1404	#define nATAPI_DASP 0x0
1405	#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */
1406	#define nATAPI_CS0N 0x0
1407	#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */
1408	#define nATAPI_CS1N 0x0
1409	#define ATAPI_ADDR 0x70 /* ATAPI address line status */
1410	#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */
1411	#define nATAPI_DMAREQ 0x0
1412	#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */
1413	#define nATAPI_DMAACKN 0x0
1414	#define ATAPI_DIOWN 0x200 /* ATAPI write line status */
1415	#define nATAPI_DIOWN 0x0
1416	#define ATAPI_DIORN 0x400 /* ATAPI read line status */
1417	#define nATAPI_DIORN 0x0
1418	#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */
1419	#define nATAPI_IORDY 0x0
1420
1421	/* Bit masks for ATAPI_SM_STATE */
1422
1423	#define PIO_CSTATE 0xf /* PIO mode state machine current state */
1424	#define DMA_CSTATE 0xf0 /* DMA mode state machine current state */
1425	#define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */
1426	#define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */
1427
1428	/* Bit masks for ATAPI_TERMINATE */
1429
1430	#define ATAPI_HOST_TERM 0x1 /* Host terminationation */
1431	#define nATAPI_HOST_TERM 0x0
1432
1433	/* Bit masks for ATAPI_REG_TIM_0 */
1434
1435	#define T2_REG 0xff /* End of cycle time for register access transfers */
1436	#define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */
1437
1438	/* Bit masks for ATAPI_PIO_TIM_0 */
1439
1440	#define T1_REG 0xf /* Time from address valid to DIOR/DIOW */
1441	#define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */
1442	#define T4_REG 0xf000 /* DIOW data hold */
1443
1444	/* Bit masks for ATAPI_PIO_TIM_1 */
1445
1446	#define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */
1447
1448	/* Bit masks for ATAPI_MULTI_TIM_0 */
1449
1450	#define TD 0xff /* DIOR/DIOW asserted pulsewidth */
1451	#define TM 0xff00 /* Time from address valid to DIOR/DIOW */
1452
1453	/* Bit masks for ATAPI_MULTI_TIM_1 */
1454
1455	#define TKW 0xff /* Selects DIOW negated pulsewidth */
1456	#define TKR 0xff00 /* Selects DIOR negated pulsewidth */
1457
1458	/* Bit masks for ATAPI_MULTI_TIM_2 */
1459
1460	#define TH 0xff /* Selects DIOW data hold */
1461	#define TEOC 0xff00 /* Selects end of cycle for DMA */
1462
1463	/* Bit masks for ATAPI_ULTRA_TIM_0 */
1464
1465	#define TACK 0xff /* Selects setup and hold times for TACK */
1466	#define TENV 0xff00 /* Selects envelope time */
1467
1468	/* Bit masks for ATAPI_ULTRA_TIM_1 */
1469
1470	#define TDVS 0xff /* Selects data valid setup time */
1471	#define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */
1472
1473	/* Bit masks for ATAPI_ULTRA_TIM_2 */
1474
1475	#define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */
1476	#define TMLI 0xff00 /* Selects interlock time */
1477
1478	/* Bit masks for ATAPI_ULTRA_TIM_3 */
1479
1480	#define TZAH 0xff /* Selects minimum delay required for output */
1481	#define READY_PAUSE 0xff00 /* Selects ready to pause */
1482
1483	/* Bit masks for TIMER_ENABLE1 */
1484
1485	#define TIMEN8 0x1 /* Timer 8 Enable */
1486	#define nTIMEN8 0x0
1487	#define TIMEN9 0x2 /* Timer 9 Enable */
1488	#define nTIMEN9 0x0
1489	#define TIMEN10 0x4 /* Timer 10 Enable */
1490	#define nTIMEN10 0x0
1491
1492	/* Bit masks for TIMER_DISABLE1 */
1493
1494	#define TIMDIS8 0x1 /* Timer 8 Disable */
1495	#define nTIMDIS8 0x0
1496	#define TIMDIS9 0x2 /* Timer 9 Disable */
1497	#define nTIMDIS9 0x0
1498	#define TIMDIS10 0x4 /* Timer 10 Disable */
1499	#define nTIMDIS10 0x0
1500
1501	/* Bit masks for TIMER_STATUS1 */
1502
1503	#define TIMIL8 0x1 /* Timer 8 Interrupt */
1504	#define nTIMIL8 0x0
1505	#define TIMIL9 0x2 /* Timer 9 Interrupt */
1506	#define nTIMIL9 0x0
1507	#define TIMIL10 0x4 /* Timer 10 Interrupt */
1508	#define nTIMIL10 0x0
1509	#define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */
1510	#define nTOVF_ERR8 0x0
1511	#define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */
1512	#define nTOVF_ERR9 0x0
1513	#define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */
1514	#define nTOVF_ERR10 0x0
1515	#define TRUN8 0x1000 /* Timer 8 Slave Enable Status */
1516	#define nTRUN8 0x0
1517	#define TRUN9 0x2000 /* Timer 9 Slave Enable Status */
1518	#define nTRUN9 0x0
1519	#define TRUN10 0x4000 /* Timer 10 Slave Enable Status */
1520	#define nTRUN10 0x0
1521
1522	/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
1523
1524	/* Bit masks for USB_FADDR */
1525
1526	#define FUNCTION_ADDRESS 0x7f /* Function address */
1527
1528	/* Bit masks for USB_POWER */
1529
1530	#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */
1531	#define nENABLE_SUSPENDM 0x0
1532	#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */
1533	#define nSUSPEND_MODE 0x0
1534	#define RESUME_MODE 0x4 /* DMA Mode */
1535	#define nRESUME_MODE 0x0
1536	#define RESET 0x8 /* Reset indicator */
1537	#define nRESET 0x0
1538	#define HS_MODE 0x10 /* High Speed mode indicator */
1539	#define nHS_MODE 0x0
1540	#define HS_ENABLE 0x20 /* high Speed Enable */
1541	#define nHS_ENABLE 0x0
1542	#define SOFT_CONN 0x40 /* Soft connect */
1543	#define nSOFT_CONN 0x0
1544	#define ISO_UPDATE 0x80 /* Isochronous update */
1545	#define nISO_UPDATE 0x0
1546
1547	/* Bit masks for USB_INTRTX */
1548
1549	#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */
1550	#define nEP0_TX 0x0
1551	#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */
1552	#define nEP1_TX 0x0
1553	#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */
1554	#define nEP2_TX 0x0
1555	#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */
1556	#define nEP3_TX 0x0
1557	#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */
1558	#define nEP4_TX 0x0
1559	#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */
1560	#define nEP5_TX 0x0
1561	#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */
1562	#define nEP6_TX 0x0
1563	#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */
1564	#define nEP7_TX 0x0
1565
1566	/* Bit masks for USB_INTRRX */
1567
1568	#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */
1569	#define nEP1_RX 0x0
1570	#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */
1571	#define nEP2_RX 0x0
1572	#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */
1573	#define nEP3_RX 0x0
1574	#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */
1575	#define nEP4_RX 0x0
1576	#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */
1577	#define nEP5_RX 0x0
1578	#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */
1579	#define nEP6_RX 0x0
1580	#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */
1581	#define nEP7_RX 0x0
1582
1583	/* Bit masks for USB_INTRTXE */
1584
1585	#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */
1586	#define nEP0_TX_E 0x0
1587	#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */
1588	#define nEP1_TX_E 0x0
1589	#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */
1590	#define nEP2_TX_E 0x0
1591	#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */
1592	#define nEP3_TX_E 0x0
1593	#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */
1594	#define nEP4_TX_E 0x0
1595	#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */
1596	#define nEP5_TX_E 0x0
1597	#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */
1598	#define nEP6_TX_E 0x0
1599	#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */
1600	#define nEP7_TX_E 0x0
1601
1602	/* Bit masks for USB_INTRRXE */
1603
1604	#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */
1605	#define nEP1_RX_E 0x0
1606	#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */
1607	#define nEP2_RX_E 0x0
1608	#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */
1609	#define nEP3_RX_E 0x0
1610	#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */
1611	#define nEP4_RX_E 0x0
1612	#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */
1613	#define nEP5_RX_E 0x0
1614	#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */
1615	#define nEP6_RX_E 0x0
1616	#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */
1617	#define nEP7_RX_E 0x0
1618
1619	/* Bit masks for USB_INTRUSB */
1620
1621	#define SUSPEND_B 0x1 /* Suspend indicator */
1622	#define nSUSPEND_B 0x0
1623	#define RESUME_B 0x2 /* Resume indicator */
1624	#define nRESUME_B 0x0
1625	#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */
1626	#define nRESET_OR_BABLE_B 0x0
1627	#define SOF_B 0x8 /* Start of frame */
1628	#define nSOF_B 0x0
1629	#define CONN_B 0x10 /* Connection indicator */
1630	#define nCONN_B 0x0
1631	#define DISCON_B 0x20 /* Disconnect indicator */
1632	#define nDISCON_B 0x0
1633	#define SESSION_REQ_B 0x40 /* Session Request */
1634	#define nSESSION_REQ_B 0x0
1635	#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */
1636	#define nVBUS_ERROR_B 0x0
1637
1638	/* Bit masks for USB_INTRUSBE */
1639
1640	#define SUSPEND_BE 0x1 /* Suspend indicator int enable */
1641	#define nSUSPEND_BE 0x0
1642	#define RESUME_BE 0x2 /* Resume indicator int enable */
1643	#define nRESUME_BE 0x0
1644	#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */
1645	#define nRESET_OR_BABLE_BE 0x0
1646	#define SOF_BE 0x8 /* Start of frame int enable */
1647	#define nSOF_BE 0x0
1648	#define CONN_BE 0x10 /* Connection indicator int enable */
1649	#define nCONN_BE 0x0
1650	#define DISCON_BE 0x20 /* Disconnect indicator int enable */
1651	#define nDISCON_BE 0x0
1652	#define SESSION_REQ_BE 0x40 /* Session Request int enable */
1653	#define nSESSION_REQ_BE 0x0
1654	#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */
1655	#define nVBUS_ERROR_BE 0x0
1656
1657	/* Bit masks for USB_FRAME */
1658
1659	#define FRAME_NUMBER 0x7ff /* Frame number */
1660
1661	/* Bit masks for USB_INDEX */
1662
1663	#define SELECTED_ENDPOINT 0xf /* selected endpoint */
1664
1665	/* Bit masks for USB_GLOBAL_CTL */
1666
1667	#define GLOBAL_ENA 0x1 /* enables USB module */
1668	#define nGLOBAL_ENA 0x0
1669	#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */
1670	#define nEP1_TX_ENA 0x0
1671	#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */
1672	#define nEP2_TX_ENA 0x0
1673	#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */
1674	#define nEP3_TX_ENA 0x0
1675	#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */
1676	#define nEP4_TX_ENA 0x0
1677	#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */
1678	#define nEP5_TX_ENA 0x0
1679	#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */
1680	#define nEP6_TX_ENA 0x0
1681	#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */
1682	#define nEP7_TX_ENA 0x0
1683	#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */
1684	#define nEP1_RX_ENA 0x0
1685	#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */
1686	#define nEP2_RX_ENA 0x0
1687	#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */
1688	#define nEP3_RX_ENA 0x0
1689	#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */
1690	#define nEP4_RX_ENA 0x0
1691	#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */
1692	#define nEP5_RX_ENA 0x0
1693	#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */
1694	#define nEP6_RX_ENA 0x0
1695	#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */
1696	#define nEP7_RX_ENA 0x0
1697
1698	/* Bit masks for USB_OTG_DEV_CTL */
1699
1700	#define SESSION 0x1 /* session indicator */
1701	#define nSESSION 0x0
1702	#define HOST_REQ 0x2 /* Host negotiation request */
1703	#define nHOST_REQ 0x0
1704	#define HOST_MODE 0x4 /* indicates USBDRC is a host */
1705	#define nHOST_MODE 0x0
1706	#define VBUS0 0x8 /* Vbus level indicator[0] */
1707	#define nVBUS0 0x0
1708	#define VBUS1 0x10 /* Vbus level indicator[1] */
1709	#define nVBUS1 0x0
1710	#define LSDEV 0x20 /* Low-speed indicator */
1711	#define nLSDEV 0x0
1712	#define FSDEV 0x40 /* Full or High-speed indicator */
1713	#define nFSDEV 0x0
1714	#define B_DEVICE 0x80 /* A' or 'B' device indicator */
1715	#define nB_DEVICE 0x0
1716
1717	/* Bit masks for USB_OTG_VBUS_IRQ */
1718
1719	#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */
1720	#define nDRIVE_VBUS_ON 0x0
1721	#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */
1722	#define nDRIVE_VBUS_OFF 0x0
1723	#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */
1724	#define nCHRG_VBUS_START 0x0
1725	#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */
1726	#define nCHRG_VBUS_END 0x0
1727	#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */
1728	#define nDISCHRG_VBUS_START 0x0
1729	#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */
1730	#define nDISCHRG_VBUS_END 0x0
1731
1732	/* Bit masks for USB_OTG_VBUS_MASK */
1733
1734	#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */
1735	#define nDRIVE_VBUS_ON_ENA 0x0
1736	#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */
1737	#define nDRIVE_VBUS_OFF_ENA 0x0
1738	#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */
1739	#define nCHRG_VBUS_START_ENA 0x0
1740	#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */
1741	#define nCHRG_VBUS_END_ENA 0x0
1742	#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */
1743	#define nDISCHRG_VBUS_START_ENA 0x0
1744	#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */
1745	#define nDISCHRG_VBUS_END_ENA 0x0
1746
1747	/* Bit masks for USB_CSR0 */
1748
1749	#define RXPKTRDY 0x1 /* data packet receive indicator */
1750	#define nRXPKTRDY 0x0
1751	#define TXPKTRDY 0x2 /* data packet in FIFO indicator */
1752	#define nTXPKTRDY 0x0
1753	#define STALL_SENT 0x4 /* STALL handshake sent */
1754	#define nSTALL_SENT 0x0
1755	#define DATAEND 0x8 /* Data end indicator */
1756	#define nDATAEND 0x0
1757	#define SETUPEND 0x10 /* Setup end */
1758	#define nSETUPEND 0x0
1759	#define SENDSTALL 0x20 /* Send STALL handshake */
1760	#define nSENDSTALL 0x0
1761	#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */
1762	#define nSERVICED_RXPKTRDY 0x0
1763	#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */
1764	#define nSERVICED_SETUPEND 0x0
1765	#define FLUSHFIFO 0x100 /* flush endpoint FIFO */
1766	#define nFLUSHFIFO 0x0
1767	#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */
1768	#define nSTALL_RECEIVED_H 0x0
1769	#define SETUPPKT_H 0x8 /* send Setup token host mode */
1770	#define nSETUPPKT_H 0x0
1771	#define ERROR_H 0x10 /* timeout error indicator host mode */
1772	#define nERROR_H 0x0
1773	#define REQPKT_H 0x20 /* Request an IN transaction host mode */
1774	#define nREQPKT_H 0x0
1775	#define STATUSPKT_H 0x40 /* Status stage transaction host mode */
1776	#define nSTATUSPKT_H 0x0
1777	#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */
1778	#define nNAK_TIMEOUT_H 0x0
1779
1780	/* Bit masks for USB_COUNT0 */
1781
1782	#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */
1783
1784	/* Bit masks for USB_NAKLIMIT0 */
1785
1786	#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */
1787
1788	/* Bit masks for USB_TX_MAX_PACKET */
1789
1790	#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */
1791
1792	/* Bit masks for USB_RX_MAX_PACKET */
1793
1794	#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */
1795
1796	/* Bit masks for USB_TXCSR */
1797
1798	#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */
1799	#define nTXPKTRDY_T 0x0
1800	#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */
1801	#define nFIFO_NOT_EMPTY_T 0x0
1802	#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */
1803	#define nUNDERRUN_T 0x0
1804	#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */
1805	#define nFLUSHFIFO_T 0x0
1806	#define STALL_SEND_T 0x10 /* issue a Stall handshake */
1807	#define nSTALL_SEND_T 0x0
1808	#define STALL_SENT_T 0x20 /* Stall handshake transmitted */
1809	#define nSTALL_SENT_T 0x0
1810	#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */
1811	#define nCLEAR_DATATOGGLE_T 0x0
1812	#define INCOMPTX_T 0x80 /* indicates that a large packet is split */
1813	#define nINCOMPTX_T 0x0
1814	#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */
1815	#define nDMAREQMODE_T 0x0
1816	#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */
1817	#define nFORCE_DATATOGGLE_T 0x0
1818	#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */
1819	#define nDMAREQ_ENA_T 0x0
1820	#define ISO_T 0x4000 /* enable Isochronous transfers */
1821	#define nISO_T 0x0
1822	#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */
1823	#define nAUTOSET_T 0x0
1824	#define ERROR_TH 0x4 /* error condition host mode */
1825	#define nERROR_TH 0x0
1826	#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */
1827	#define nSTALL_RECEIVED_TH 0x0
1828	#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */
1829	#define nNAK_TIMEOUT_TH 0x0
1830
1831	/* Bit masks for USB_TXCOUNT */
1832
1833	#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */
1834
1835	/* Bit masks for USB_RXCSR */
1836
1837	#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */
1838	#define nRXPKTRDY_R 0x0
1839	#define FIFO_FULL_R 0x2 /* FIFO not empty */
1840	#define nFIFO_FULL_R 0x0
1841	#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */
1842	#define nOVERRUN_R 0x0
1843	#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */
1844	#define nDATAERROR_R 0x0
1845	#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */
1846	#define nFLUSHFIFO_R 0x0
1847	#define STALL_SEND_R 0x20 /* issue a Stall handshake */
1848	#define nSTALL_SEND_R 0x0
1849	#define STALL_SENT_R 0x40 /* Stall handshake transmitted */
1850	#define nSTALL_SENT_R 0x0
1851	#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */
1852	#define nCLEAR_DATATOGGLE_R 0x0
1853	#define INCOMPRX_R 0x100 /* indicates that a large packet is split */
1854	#define nINCOMPRX_R 0x0
1855	#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */
1856	#define nDMAREQMODE_R 0x0
1857	#define DISNYET_R 0x1000 /* disable Nyet handshakes */
1858	#define nDISNYET_R 0x0
1859	#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */
1860	#define nDMAREQ_ENA_R 0x0
1861	#define ISO_R 0x4000 /* enable Isochronous transfers */
1862	#define nISO_R 0x0
1863	#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */
1864	#define nAUTOCLEAR_R 0x0
1865	#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */
1866	#define nERROR_RH 0x0
1867	#define REQPKT_RH 0x20 /* request an IN transaction host mode */
1868	#define nREQPKT_RH 0x0
1869	#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */
1870	#define nSTALL_RECEIVED_RH 0x0
1871	#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */
1872	#define nINCOMPRX_RH 0x0
1873	#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */
1874	#define nDMAREQMODE_RH 0x0
1875	#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */
1876	#define nAUTOREQ_RH 0x0
1877
1878	/* Bit masks for USB_RXCOUNT */
1879
1880	#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */
1881
1882	/* Bit masks for USB_TXTYPE */
1883
1884	#define TARGET_EP_NO_T 0xf /* EP number */
1885	#define PROTOCOL_T 0xc /* transfer type */
1886
1887	/* Bit masks for USB_TXINTERVAL */
1888
1889	#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */
1890
1891	/* Bit masks for USB_RXTYPE */
1892
1893	#define TARGET_EP_NO_R 0xf /* EP number */
1894	#define PROTOCOL_R 0xc /* transfer type */
1895
1896	/* Bit masks for USB_RXINTERVAL */
1897
1898	#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */
1899
1900	/* Bit masks for USB_DMA_INTERRUPT */
1901
1902	#define DMA0_INT 0x1 /* DMA0 pending interrupt */
1903	#define nDMA0_INT 0x0
1904	#define DMA1_INT 0x2 /* DMA1 pending interrupt */
1905	#define nDMA1_INT 0x0
1906	#define DMA2_INT 0x4 /* DMA2 pending interrupt */
1907	#define nDMA2_INT 0x0
1908	#define DMA3_INT 0x8 /* DMA3 pending interrupt */
1909	#define nDMA3_INT 0x0
1910	#define DMA4_INT 0x10 /* DMA4 pending interrupt */
1911	#define nDMA4_INT 0x0
1912	#define DMA5_INT 0x20 /* DMA5 pending interrupt */
1913	#define nDMA5_INT 0x0
1914	#define DMA6_INT 0x40 /* DMA6 pending interrupt */
1915	#define nDMA6_INT 0x0
1916	#define DMA7_INT 0x80 /* DMA7 pending interrupt */
1917	#define nDMA7_INT 0x0
1918
1919	/* Bit masks for USB_DMAxCONTROL */
1920
1921	#define DMA_ENA 0x1 /* DMA enable */
1922	#define nDMA_ENA 0x0
1923	#define DIRECTION 0x2 /* direction of DMA transfer */
1924	#define nDIRECTION 0x0
1925	#define MODE 0x4 /* DMA Bus error */
1926	#define nMODE 0x0
1927	#define INT_ENA 0x8 /* Interrupt enable */
1928	#define nINT_ENA 0x0
1929	#define EPNUM 0xf0 /* EP number */
1930	#define BUSERROR 0x100 /* DMA Bus error */
1931	#define nBUSERROR 0x0
1932
1933	/* Bit masks for USB_DMAxADDRHIGH */
1934
1935	#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */
1936
1937	/* Bit masks for USB_DMAxADDRLOW */
1938
1939	#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */
1940
1941	/* Bit masks for USB_DMAxCOUNTHIGH */
1942
1943	#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
1944
1945	/* Bit masks for USB_DMAxCOUNTLOW */
1946
1947	#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
1948
1949	/* ******************************************* */
1950	/* MULTI BIT MACRO ENUMERATIONS */
1951	/* ******************************************* */
1952
1953	#ifdef _MISRA_RULES
1954	#pragma diag(pop)
1955	#endif /* _MISRA_RULES */
1956
1957	#endif /* _DEF_BF548_H */

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: trunk/libs/newlib/src/libgloss/bfin/include/defBF548.h @ 684

Download in other formats: