Context Navigation

← Previous Revision
Latest Revision
Next Revision →
Blame
Revision Log

defBF59x_base.h @ 603

Last change on this file since 603 was 444, checked in by satin@…, 7 years ago
add newlib,libalmos-mkh, restructure shared_syscalls.h and mini-libc
File size: 63.8 KB

Line
1	/*
2	* The authors hereby grant permission to use, copy, modify, distribute,
3	* and license this software and its documentation for any purpose, provided
4	* that existing copyright notices are retained in all copies and that this
5	* notice is included verbatim in any distributions. No written agreement,
6	* license, or royalty fee is required for any of the authorized uses.
7	* Modifications to this software may be copyrighted by their authors
8	* and need not follow the licensing terms described here, provided that
9	* the new terms are clearly indicated on the first page of each file where
10	* they apply.
11	*/
12
13	/*
14	** defBF59x_base.h
15	**
16	** Copyright (C) 2009-2010 Analog Devices Inc., All Rights Reserved.
17	**
18	************************************************************************************
19	**
20	** This include file contains a list of macro "defines" to enable the programmer
21	** to use symbolic names for the registers common to the ADSP-BF59x peripherals.
22	**
23	************************************************************************************
24	** System MMR Register Map
25	************************************************************************************/
26
27	#ifndef _DEF_BF59x_H
28	#define _DEF_BF59x_H
29
30	#ifdef _MISRA_RULES
31	#pragma diag(push)
32	#pragma diag(suppress:misra_rule_19_4)
33	#pragma diag(suppress:misra_rule_19_7)
34	#include <stdint.h>
35	#endif /* _MISRA_RULES */
36
37
38	/* ************************************************************************************************************** */
39	/* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF59x */
40	/* ************************************************************************************************************** */
41
42	/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
43	#define PLL_CTL 0xFFC00000 /* PLL Control Register */
44	#define PLL_DIV 0xFFC00004 /* PLL Divide Register */
45	#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */
46	#define PLL_STAT 0xFFC0000C /* PLL Status Register */
47	#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */
48	#define CHIPID 0xFFC00014 /* Device ID Register */
49	#define AUX_REVID 0xFFC00108 /* Auxiliary Revision ID Register */
50
51	/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */
52	#define SWRST 0xFFC00100 /* Software Reset Register */
53	#define SYSCR 0xFFC00104 /* System Configuration Register */
54
55	#define SIC_IMASK0 0xFFC0010C /* Interrupt Mask Register */
56	/* legacy register name (below) provided for backwards code compatibility */
57	#define SIC_IMASK SIC_IMASK0
58	#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */
59	#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */
60	#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */
61	#define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */
62	#define SIC_ISR0 0xFFC00120 /* Interrupt Status Register */
63	/* legacy register name (below) provided for backwards code compatibility */
64	#define SIC_ISR SIC_ISR0
65	#define SIC_IWR0 0xFFC00124 /* Interrupt Wakeup Register */
66	/* legacy register name (below) provided for backwards code compatibility */
67	#define SIC_IWR SIC_IWR0
68
69	/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */
70	#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */
71	#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */
72	#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */
73
74	/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */
75	#define UART0_THR 0xFFC00400 /* Transmit Holding register */
76	#define UART0_RBR 0xFFC00400 /* Receive Buffer register */
77	#define UART0_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */
78	#define UART0_IER 0xFFC00404 /* Interrupt Enable Register */
79	#define UART0_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */
80	#define UART0_IIR 0xFFC00408 /* Interrupt Identification Register */
81	#define UART0_LCR 0xFFC0040C /* Line Control Register */
82	#define UART0_MCR 0xFFC00410 /* Modem Control Register */
83	#define UART0_LSR 0xFFC00414 /* Line Status Register */
84	#define UART0_SCR 0xFFC0041C /* SCR Scratch Register */
85	#define UART0_GCTL 0xFFC00424 /* Global Control Register */
86
87
88	/* SPI0 Controller (0xFFC00500 - 0xFFC005FF) */
89	#define SPI0_CTL 0xFFC00500 /* SPI0 Control Register */
90	#define SPI0_FLG 0xFFC00504 /* SPI0 Flag register */
91	#define SPI0_STAT 0xFFC00508 /* SPI0 Status register */
92	#define SPI0_TDBR 0xFFC0050C /* SPI0 Transmit Data Buffer Register */
93	#define SPI0_RDBR 0xFFC00510 /* SPI0 Receive Data Buffer Register */
94	#define SPI0_BAUD 0xFFC00514 /* SPI0 Baud rate Register */
95	#define SPI0_SHADOW 0xFFC00518 /* SPI0_RDBR Shadow Register */
96
97	/* SPI1 Controller (0xFFC01300 - 0xFFC013FF) */
98	#define SPI1_CTL 0xFFC01300 /* SPI1 Control Register */
99	#define SPI1_FLG 0xFFC01304 /* SPI1 Flag register */
100	#define SPI1_STAT 0xFFC01308 /* SPI1 Status register */
101	#define SPI1_TDBR 0xFFC0130C /* SPI1 Transmit Data Buffer Register */
102	#define SPI1_RDBR 0xFFC01310 /* SPI1 Receive Data Buffer Register */
103	#define SPI1_BAUD 0xFFC01314 /* SPI1 Baud rate Register */
104	#define SPI1_SHADOW 0xFFC01318 /* SPI1_RDBR Shadow Register */
105
106
107	/* TIMER0-2 Registers (0xFFC00600 - 0xFFC006FF) */
108	#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */
109	#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */
110	#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */
111	#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */
112
113	#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */
114	#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */
115	#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */
116	#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */
117
118	#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */
119	#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */
120	#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */
121	#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */
122
123	#define TIMER_ENABLE 0xFFC00640 /* Timer Enable Register */
124	#define TIMER_DISABLE 0xFFC00644 /* Timer Disable Register */
125	#define TIMER_STATUS 0xFFC00648 /* Timer Status Register */
126
127
128	/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */
129	#define PORTFIO 0xFFC00700 /* Port F I/O Pin State Specify Register */
130	#define PORTFIO_CLEAR 0xFFC00704 /* Port F I/O Peripheral Interrupt Clear Register */
131	#define PORTFIO_SET 0xFFC00708 /* Port F I/O Peripheral Interrupt Set Register */
132	#define PORTFIO_TOGGLE 0xFFC0070C /* Port F I/O Pin State Toggle Register */
133	#define PORTFIO_MASKA 0xFFC00710 /* Port F I/O Mask State Specify Interrupt A Register */
134	#define PORTFIO_MASKA_CLEAR 0xFFC00714 /* Port F I/O Mask Disable Interrupt A Register */
135	#define PORTFIO_MASKA_SET 0xFFC00718 /* Port F I/O Mask Enable Interrupt A Register */
136	#define PORTFIO_MASKA_TOGGLE 0xFFC0071C /* Port F I/O Mask Toggle Enable Interrupt A Register */
137	#define PORTFIO_MASKB 0xFFC00720 /* Port F I/O Mask State Specify Interrupt B Register */
138	#define PORTFIO_MASKB_CLEAR 0xFFC00724 /* Port F I/O Mask Disable Interrupt B Register */
139	#define PORTFIO_MASKB_SET 0xFFC00728 /* Port F I/O Mask Enable Interrupt B Register */
140	#define PORTFIO_MASKB_TOGGLE 0xFFC0072C /* Port F I/O Mask Toggle Enable Interrupt B Register */
141	#define PORTFIO_DIR 0xFFC00730 /* Port F I/O Direction Register */
142	#define PORTFIO_POLAR 0xFFC00734 /* Port F I/O Source Polarity Register */
143	#define PORTFIO_EDGE 0xFFC00738 /* Port F I/O Source Sensitivity Register */
144	#define PORTFIO_BOTH 0xFFC0073C /* Port F I/O Set on BOTH Edges Register */
145	#define PORTFIO_INEN 0xFFC00740 /* Port F I/O Input Enable Register */
146
147	/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */
148	#define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */
149	#define PORTGIO_CLEAR 0xFFC01504 /* Port G I/O Peripheral Interrupt Clear Register */
150	#define PORTGIO_SET 0xFFC01508 /* Port G I/O Peripheral Interrupt Set Register */
151	#define PORTGIO_TOGGLE 0xFFC0150C /* Port G I/O Pin State Toggle Register */
152	#define PORTGIO_MASKA 0xFFC01510 /* Port G I/O Mask State Specify Interrupt A Register */
153	#define PORTGIO_MASKA_CLEAR 0xFFC01514 /* Port G I/O Mask Disable Interrupt A Register */
154	#define PORTGIO_MASKA_SET 0xFFC01518 /* Port G I/O Mask Enable Interrupt A Register */
155	#define PORTGIO_MASKA_TOGGLE 0xFFC0151C /* Port G I/O Mask Toggle Enable Interrupt A Register */
156	#define PORTGIO_MASKB 0xFFC01520 /* Port G I/O Mask State Specify Interrupt B Register */
157	#define PORTGIO_MASKB_CLEAR 0xFFC01524 /* Port G I/O Mask Disable Interrupt B Register */
158	#define PORTGIO_MASKB_SET 0xFFC01528 /* Port G I/O Mask Enable Interrupt B Register */
159	#define PORTGIO_MASKB_TOGGLE 0xFFC0152C /* Port G I/O Mask Toggle Enable Interrupt B Register */
160	#define PORTGIO_DIR 0xFFC01530 /* Port G I/O Direction Register */
161	#define PORTGIO_POLAR 0xFFC01534 /* Port G I/O Source Polarity Register */
162	#define PORTGIO_EDGE 0xFFC01538 /* Port G I/O Source Sensitivity Register */
163	#define PORTGIO_BOTH 0xFFC0153C /* Port G I/O Set on BOTH Edges Register */
164	#define PORTGIO_INEN 0xFFC01540 /* Port G I/O Input Enable Register */
165
166
167	/* Pin Control Registers (0xFFC01100 - 0xFFC01208) */
168	#define PORTF_FER 0xFFC01100 /* Port F Function Enable Register (Alternate/Flag) /
169	#define PORTF_MUX 0xFFC01104 /* Port F mux control */
170	#define PORTF_PADCTL 0xFFC01108 /* Port F pad control */
171	#define PORTG_FER 0xFFC01200 /* Port G Function Enable Register (Alternate/Flag) /
172	#define PORTG_MUX 0xFFC01204 /* Port G mux control */
173	#define PORTG_PADCTL 0xFFC01208 /* Port G pad control */
174
175	/* SPORT Clock Gating (0xFFC0120C) */
176	#define SPORT_GATECLK 0xFFC0120C /* SPORT Clock Gating Control Register */
177
178
179	/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
180	#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */
181	#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */
182	#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */
183	#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */
184	#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */
185	#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */
186	#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */
187	#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */
188	#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */
189	#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */
190	#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */
191	#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */
192	#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */
193	#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */
194	#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */
195	#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */
196	#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */
197	#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */
198	#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */
199	#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */
200	#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */
201	#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */
202
203
204	/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
205	#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */
206	#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */
207	#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */
208	#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */
209	#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */
210	#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */
211	#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */
212	#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */
213	#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */
214	#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */
215	#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */
216	#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */
217	#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */
218	#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */
219	#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */
220	#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */
221	#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */
222	#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */
223	#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */
224	#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */
225	#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */
226	#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */
227
228	/* DMA Traffic Control Registers (0xFFC00B00 - 0xFFC00BFF) */
229	#define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */
230	#define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */
231
232	/* Alternate deprecated register names (below) provided for backwards code compatibility */
233	#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */
234	#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */
235
236	/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */
237	#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */
238	#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */
239	#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */
240	#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */
241	#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */
242	#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */
243	#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */
244	#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */
245	#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */
246	#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */
247	#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */
248	#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */
249	#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */
250
251	#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */
252	#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */
253	#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */
254	#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */
255	#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */
256	#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */
257	#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */
258	#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */
259	#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */
260	#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */
261	#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */
262	#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */
263	#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */
264
265	#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */
266	#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */
267	#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */
268	#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */
269	#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */
270	#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */
271	#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */
272	#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */
273	#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */
274	#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */
275	#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */
276	#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */
277	#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */
278
279	#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */
280	#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */
281	#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */
282	#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */
283	#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */
284	#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */
285	#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */
286	#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */
287	#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */
288	#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */
289	#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */
290	#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */
291	#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */
292
293	#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */
294	#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */
295	#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */
296	#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */
297	#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */
298	#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */
299	#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */
300	#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */
301	#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */
302	#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */
303	#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */
304	#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */
305	#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */
306
307	#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */
308	#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */
309	#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */
310	#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */
311	#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */
312	#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */
313	#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */
314	#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */
315	#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */
316	#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */
317	#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */
318	#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */
319	#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */
320
321	#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */
322	#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */
323	#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */
324	#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */
325	#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */
326	#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */
327	#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */
328	#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */
329	#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */
330	#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */
331	#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */
332	#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */
333	#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */
334
335	#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */
336	#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */
337	#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */
338	#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */
339	#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */
340	#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */
341	#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */
342	#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */
343	#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */
344	#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */
345	#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */
346	#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */
347	#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */
348
349	#define DMA8_NEXT_DESC_PTR 0xFFC00E00 /* DMA Channel 8 Next Descriptor Pointer Register */
350	#define DMA8_START_ADDR 0xFFC00E04 /* DMA Channel 8 Start Address Register */
351	#define DMA8_CONFIG 0xFFC00E08 /* DMA Channel 8 Configuration Register */
352	#define DMA8_X_COUNT 0xFFC00E10 /* DMA Channel 8 X Count Register */
353	#define DMA8_X_MODIFY 0xFFC00E14 /* DMA Channel 8 X Modify Register */
354	#define DMA8_Y_COUNT 0xFFC00E18 /* DMA Channel 8 Y Count Register */
355	#define DMA8_Y_MODIFY 0xFFC00E1C /* DMA Channel 8 Y Modify Register */
356	#define DMA8_CURR_DESC_PTR 0xFFC00E20 /* DMA Channel 8 Current Descriptor Pointer Register */
357	#define DMA8_CURR_ADDR 0xFFC00E24 /* DMA Channel 8 Current Address Register */
358	#define DMA8_IRQ_STATUS 0xFFC00E28 /* DMA Channel 8 Interrupt/Status Register */
359	#define DMA8_PERIPHERAL_MAP 0xFFC00E2C /* DMA Channel 8 Peripheral Map Register */
360	#define DMA8_CURR_X_COUNT 0xFFC00E30 /* DMA Channel 8 Current X Count Register */
361	#define DMA8_CURR_Y_COUNT 0xFFC00E38 /* DMA Channel 8 Current Y Count Register */
362
363	#define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */
364	#define MDMA_D0_START_ADDR 0xFFC00F04 /* MemDMA Stream 0 Destination Start Address Register */
365	#define MDMA_D0_CONFIG 0xFFC00F08 /* MemDMA Stream 0 Destination Configuration Register */
366	#define MDMA_D0_X_COUNT 0xFFC00F10 /* MemDMA Stream 0 Destination X Count Register */
367	#define MDMA_D0_X_MODIFY 0xFFC00F14 /* MemDMA Stream 0 Destination X Modify Register */
368	#define MDMA_D0_Y_COUNT 0xFFC00F18 /* MemDMA Stream 0 Destination Y Count Register */
369	#define MDMA_D0_Y_MODIFY 0xFFC00F1C /* MemDMA Stream 0 Destination Y Modify Register */
370	#define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register*/
371	#define MDMA_D0_CURR_ADDR 0xFFC00F24 /* MemDMA Stream 0 Destination Current Address Register */
372	#define MDMA_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA Stream 0 Destination Interrupt/Status Register */
373	#define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA Stream 0 Destination Peripheral Map Register */
374	#define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA Stream 0 Destination Current X Count Register */
375	#define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA Stream 0 Destination Current Y Count Register */
376
377	#define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */
378	#define MDMA_S0_START_ADDR 0xFFC00F44 /* MemDMA Stream 0 Source Start Address Register */
379	#define MDMA_S0_CONFIG 0xFFC00F48 /* MemDMA Stream 0 Source Configuration Register */
380	#define MDMA_S0_X_COUNT 0xFFC00F50 /* MemDMA Stream 0 Source X Count Register */
381	#define MDMA_S0_X_MODIFY 0xFFC00F54 /* MemDMA Stream 0 Source X Modify Register */
382	#define MDMA_S0_Y_COUNT 0xFFC00F58 /* MemDMA Stream 0 Source Y Count Register */
383	#define MDMA_S0_Y_MODIFY 0xFFC00F5C /* MemDMA Stream 0 Source Y Modify Register */
384	#define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */
385	#define MDMA_S0_CURR_ADDR 0xFFC00F64 /* MemDMA Stream 0 Source Current Address Register */
386	#define MDMA_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA Stream 0 Source Interrupt/Status Register */
387	#define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA Stream 0 Source Peripheral Map Register */
388	#define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA Stream 0 Source Current X Count Register */
389	#define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA Stream 0 Source Current Y Count Register */
390
391	#define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */
392	#define MDMA_D1_START_ADDR 0xFFC00F84 /* MemDMA Stream 1 Destination Start Address Register */
393	#define MDMA_D1_CONFIG 0xFFC00F88 /* MemDMA Stream 1 Destination Configuration Register */
394	#define MDMA_D1_X_COUNT 0xFFC00F90 /* MemDMA Stream 1 Destination X Count Register */
395	#define MDMA_D1_X_MODIFY 0xFFC00F94 /* MemDMA Stream 1 Destination X Modify Register */
396	#define MDMA_D1_Y_COUNT 0xFFC00F98 /* MemDMA Stream 1 Destination Y Count Register */
397	#define MDMA_D1_Y_MODIFY 0xFFC00F9C /* MemDMA Stream 1 Destination Y Modify Register */
398	#define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register*/
399	#define MDMA_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA Stream 1 Destination Current Address Register */
400	#define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */
401	#define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA Stream 1 Destination Peripheral Map Register */
402	#define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA Stream 1 Destination Current X Count Register */
403	#define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA Stream 1 Destination Current Y Count Register */
404
405	#define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */
406	#define MDMA_S1_START_ADDR 0xFFC00FC4 /* MemDMA Stream 1 Source Start Address Register */
407	#define MDMA_S1_CONFIG 0xFFC00FC8 /* MemDMA Stream 1 Source Configuration Register */
408	#define MDMA_S1_X_COUNT 0xFFC00FD0 /* MemDMA Stream 1 Source X Count Register */
409	#define MDMA_S1_X_MODIFY 0xFFC00FD4 /* MemDMA Stream 1 Source X Modify Register */
410	#define MDMA_S1_Y_COUNT 0xFFC00FD8 /* MemDMA Stream 1 Source Y Count Register */
411	#define MDMA_S1_Y_MODIFY 0xFFC00FDC /* MemDMA Stream 1 Source Y Modify Register */
412	#define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */
413	#define MDMA_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA Stream 1 Source Current Address Register */
414	#define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA Stream 1 Source Interrupt/Status Register */
415	#define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA Stream 1 Source Peripheral Map Register */
416	#define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA Stream 1 Source Current X Count Register */
417	#define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA Stream 1 Source Current Y Count Register */
418
419
420	/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */
421	#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */
422	#define PPI_STATUS 0xFFC01004 /* PPI Status Register */
423	#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */
424	#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */
425	#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */
426
427
428	/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */
429	#define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */
430	#define TWI_CONTROL 0xFFC01404 /* TWI Control Register */
431	#define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */
432	#define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */
433	#define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */
434	#define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */
435	#define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */
436	#define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */
437	#define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */
438	#define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */
439	#define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */
440	#define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */
441	#define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */
442	#define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */
443	#define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */
444	#define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */
445
446
447	/******************************************************************************************************************
448	** System MMR Register Bits And Macros
449	**
450	** Disclaimer: All macros are intended to make C and Assembly code more readable.
451	** Use these macros carefully, as any that do left shifts for field
452	** depositing will result in the lower order bits being destroyed. Any
453	** macro that shifts left to properly position the bit-field should be
454	** used as part of an OR to initialize a register and NOT as a dynamic
455	** modifier UNLESS the lower order bits are saved and ORed back in when
456	** the macro is used.
457	*******************************************************************************************************************/
458
459	/************************************ PLL AND RESET MASKS *****************************************************/
460
461	/* PLL_CTL Masks */
462	#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
463	#define PLL_OFF 0x0002 /* PLL Not Powered */
464	#define STOPCK 0x0008 /* Core Clock Off */
465	#define PDWN 0x0020 /* Enter Deep Sleep Mode */
466	#define BYPASS 0x0100 /* Bypass the PLL */
467	#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */
468
469	/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */
470	#ifdef _MISRA_RULES
471	#define SET_MSEL(x) (((x)&0x3Fu) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKINMSEL /
472	#else
473	#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKINMSEL /
474	#endif /* _MISRA_RULES */
475
476	/* PLL_DIV Masks */
477	#define SSEL 0x000F /* System Select */
478	#define CSEL 0x0030 /* Core Select */
479	#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */
480	#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */
481	#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */
482	#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */
483
484	/* PLL_DIV Macros */
485	#ifdef _MISRA_RULES
486	#define SET_SSEL(x) ((x)&0xFu) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
487	#else
488	#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
489	#endif /* _MISRA_RULES */
490
491	/* VR_CTL Masks */
492	#define WAKE_EN0 0x0100 /* Enable Wakeup From Hibernate/Deep Sleep on the WAKEN0 signal */
493	#define WAKE_EN1 0x0200 /* Enable Wakeup From Hibernate/Deep Sleep on the WAKEN1 signal */
494	#define WAKE_EN2 0x0400 /* Enable Wakeup From Hibernate/Deep Sleep on the WAKEN2 signal */
495	#define WAKE_EN3 0x0800 /* Enable Wakeup From Hibernate/Deep Sleep on the WAKEN3 signal */
496	#define HIBERNATEB 0x1000 /* Bit mask for HIBERNATEB */
497	#define HIBERNATE 0x0000 /* Deasserts EXT_WAKE in order to enter hibernate mode */
498	#define EXTCLK_SEL 0x2000 /* Selects SCLK for the EXTCLK signal */
499	#define EXTCLK_OE 0x4000 /* Output enable for the EXTCLK signal */
500	#define WAKE_POLARITY 0x8000 /* Make wakeups active-high */
501
502	/* PLL_STAT Masks */
503	#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */
504	#define FULL_ON 0x0002 /* Processor In Full On Mode */
505	#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */
506	#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */
507
508	/* SWRST Masks */
509	#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */
510	#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */
511	#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */
512	#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */
513	#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */
514
515	/* SYSCR Masks */
516	#define BMODE_IDLE 0x0000 /* Bypass boot ROM, go to idle */
517	#define BMODE_SPI1MEM 0x0002 /* Boot from serial SPI1 memory */
518	#define BMODE_SPI1HOST 0x0003 /* Boot from SPI1 host (slave mode) */
519	#define BMODE_SPI0MEM 0x0004 /* Boot from serial SPI0 memory */
520	#define BMODE_PPI 0x0005 /* Boot from PPI Port */
521	#define BMODE_L1ROM 0x0006 /* Boot from internal L1 ROM */
522	#define BMODE_UART0HOST 0x0007 /* Boot from UART0 host */
523	#define BMODE 0x0007 /* Boot Mode. Mirror of BMODE Mode Pins */
524
525	#define BCODE 0x00F0
526	#define BCODE_NORMAL 0x0000 /* normal boot, update PLL/VR, quickboot as by WURESET */
527	#define BCODE_NOBOOT 0x0010 /* bypass boot, don't update PLL/VR */
528	#define BCODE_QUICKBOOT 0x0020 /* quick boot, overrule WURESET, don't update PLL/VR */
529	#define BCODE_ALLBOOT 0x0040 /* no quick boot, overrule WURESET, don't update PLL/VR */
530	#define BCODE_FULLBOOT 0x0060 /* no quick boot, overrule WURESET, update PLL/VR */
531
532	#define WURESET 0x1000 /* wakeup event since last hardware reset */
533	#define DFRESET 0x2000 /* recent reset was due to a double fault event */
534	#define WDRESET 0x4000 /* recent reset was due to a watchdog event */
535	#define SWRESET 0x8000 /* recent reset was issued by software */
536
537	/******************************* SYSTEM INTERRUPT CONTROLLER MASKS *******************************************/
538	/* Peripheral Masks For SIC_ISR0, SIC_IWR0, SIC_IMASK0 */
539	#define IRQ_PLL_WAKEUP 0x00000001 /* PLL Wakeup Interrupt */
540	#define IRQ_DMA_ERR0 0x00000002 /* Error Interrupt (DMA error 0 interrupt (generic)) */
541	#define IRQ_PPI_ERR 0x00000004 /* Error Interrupt (PPI error interrupt) */
542	#define IRQ_SPORT0_ERR 0x00000008 /* Error Interrupt (SPORT0 status interrupt) */
543	#define IRQ_SPORT1_ERR 0x00000010 /* Error Interrupt (SPORT1 status interrupt) */
544	#define IRQ_SPI0_ERR 0x00000020 /* Error Interrupt (SPI0 status interrupt) */
545	#define IRQ_SPI1_ERR 0x00000040 /* Error Interrupt (SPI1 status interrupt) */
546	#define IRQ_UART0_ERR 0x00000080 /* Error Interrupt (UART0 status interrupt) */
547	#define IRQ_DMA0 0x00000100 /* DMA channel 0 (PPI) Interrupt */
548	#define IRQ_DMA1 0x00000200 /* DMA Channel 1 (SPORT0 RX) Interrupt */
549	#define IRQ_DMA2 0x00000400 /* DMA Channel 2 (SPORT0 TX) Interrupt */
550	#define IRQ_DMA3 0x00000800 /* DMA Channel 3 (SPORT1 RX) Interrupt */
551	#define IRQ_DMA4 0x00001000 /* DMA Channel 4 (SPORT1 TX) Interrupt */
552	#define IRQ_DMA5 0x00002000 /* DMA Channel 5 (SPI0) Interrupt */
553	#define IRQ_DMA6 0x00004000 /* DMA Channel 6 (SPI1) Interrupt */
554	#define IRQ_DMA7 0x00008000 /* DMA Channel 7 (UART0 RX) Interrupt */
555	#define IRQ_DMA8 0x00010000 /* DMA Channel 8 (UART0 TX) Interrupt */
556	#define IRQ_PFA_PORTF 0x00020000 /* PF Port F Interrupt A */
557	#define IRQ_PFB_PORTF 0x00040000 /* PF Port F Interrupt B */
558	#define IRQ_TIMER0 0x00080000 /* Timer 0 Interrupt */
559	#define IRQ_TIMER1 0x00100000 /* Timer 1 Interrupt */
560	#define IRQ_TIMER2 0x00200000 /* Timer 2 Interrupt */
561	#define IRQ_PFA_PORTG 0x00400000 /* PF Port G Interrupt A */
562	#define IRQ_PFB_PORTG 0x00800000 /* PF Port G Interrupt B */
563	#define IRQ_TWI 0x01000000 /* TWI Interrupt */
564	#define IRQ_DMA12 0x20000000 /* DMA Channels 12 (MDMA0 Destination) TX Interrupt */
565	#define IRQ_DMA13 0x20000000 /* DMA Channels 13 (MDMA0 Source) RX Interrupt */
566	#define IRQ_DMA14 0x40000000 /* DMA Channels 14 (MDMA1 Destination) TX Interrupt */
567	#define IRQ_DMA15 0x40000000 /* DMA Channels 15 (MDMA1 Source) RX Interrupt */
568	#define IRQ_WDOG 0x80000000 /* Software Watchdog Timer Interrupt */
569
570	/* Peripheral Masks For SIC_ISR, SIC_IWR, SIC_IMASK */
571	#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */
572	#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */
573	/* x = pos 0 to 31, for 32-63 use value-32 */
574	#define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */
575	#define IWR_DISABLE(x) (0xFFFFFFFF^(1<<(x))) /* Wakeup Disable Peripheral #x */
576
577
578	#ifdef _MISRA_RULES
579	#define _MF15 0xFu
580	#define _MF7 7u
581	#else
582	#define _MF15 0xF
583	#define _MF7 7
584	#endif /* _MISRA_RULES */
585
586
587	/* SIC_IAR0 Macros*/
588	#define P0_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #0 assigned IVG #x */
589	#define P1_IVG(x) (((x)&_MF15)-_MF7) << 0x4 /* Peripheral #1 assigned IVG #x */
590	#define P2_IVG(x) (((x)&_MF15)-_MF7) << 0x8 /* Peripheral #2 assigned IVG #x */
591	#define P3_IVG(x) (((x)&_MF15)-_MF7) << 0xC /* Peripheral #3 assigned IVG #x */
592	#define P4_IVG(x) (((x)&_MF15)-_MF7) << 0x10 /* Peripheral #4 assigned IVG #x */
593	#define P5_IVG(x) (((x)&_MF15)-_MF7) << 0x14 /* Peripheral #5 assigned IVG #x */
594	#define P6_IVG(x) (((x)&_MF15)-_MF7) << 0x18 /* Peripheral #6 assigned IVG #x */
595	#define P7_IVG(x) (((x)&_MF15)-_MF7) << 0x1C /* Peripheral #7 assigned IVG #x */
596
597	/* SIC_IAR1 Macros*/
598	#define P8_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #8 assigned IVG #x */
599	#define P9_IVG(x) (((x)&_MF15)-_MF7) << 0x4 /* Peripheral #9 assigned IVG #x */
600	#define P10_IVG(x) (((x)&_MF15)-_MF7) << 0x8 /* Peripheral #10 assigned IVG #x */
601	#define P11_IVG(x) (((x)&_MF15)-_MF7) << 0xC /* Peripheral #11 assigned IVG #x */
602	#define P12_IVG(x) (((x)&_MF15)-_MF7) << 0x10 /* Peripheral #12 assigned IVG #x */
603	#define P13_IVG(x) (((x)&_MF15)-_MF7) << 0x14 /* Peripheral #13 assigned IVG #x */
604	#define P14_IVG(x) (((x)&_MF15)-_MF7) << 0x18 /* Peripheral #14 assigned IVG #x */
605	#define P15_IVG(x) (((x)&_MF15)-_MF7) << 0x1C /* Peripheral #15 assigned IVG #x */
606
607	/* SIC_IAR2 Macros*/
608	#define P16_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #16 assigned IVG #x */
609	#define P17_IVG(x) (((x)&_MF15)-_MF7) << 0x4 /* Peripheral #17 assigned IVG #x */
610	#define P18_IVG(x) (((x)&_MF15)-_MF7) << 0x8 /* Peripheral #18 assigned IVG #x */
611	#define P19_IVG(x) (((x)&_MF15)-_MF7) << 0xC /* Peripheral #19 assigned IVG #x */
612	#define P20_IVG(x) (((x)&_MF15)-_MF7) << 0x10 /* Peripheral #20 assigned IVG #x */
613	#define P21_IVG(x) (((x)&_MF15)-_MF7) << 0x14 /* Peripheral #21 assigned IVG #x */
614	#define P22_IVG(x) (((x)&_MF15)-_MF7) << 0x18 /* Peripheral #22 assigned IVG #x */
615	#define P23_IVG(x) (((x)&_MF15)-_MF7) << 0x1C /* Peripheral #23 assigned IVG #x */
616
617	/* SIC_IAR3 Macros*/
618	#define P24_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #24 assigned IVG #x */
619	#define P29_IVG(x) (((x)&_MF15)-_MF7) << 0x14 /* Peripheral #29 assigned IVG #x */
620	#define P30_IVG(x) (((x)&_MF15)-_MF7) << 0x18 /* Peripheral #30 assigned IVG #x */
621	#define P31_IVG(x) (((x)&_MF15)-_MF7) << 0x1C /* Peripheral #31 assigned IVG #x */
622
623
624	/* SIC_IMASK0 Masks*/
625	#define SIC_UNMASK0_ALL 0x00000000 /* Unmask all peripheral interrupts */
626	#define SIC_MASK0_ALL 0xE1FFFFFF /* Mask all peripheral interrupts */
627
628	/* SIC_IWR0 Masks*/
629	#define IWR0_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */
630	#define IWR0_ENABLE_ALL 0xE1FFFFFF /* Wakeup Enable all peripherals */
631
632
633	/* ************************************ WATCHDOG TIMER MASKS **************************************************/
634
635	/* Watchdog Timer WDOG_CTL Register Masks */
636	#ifdef _MISRA_RULES
637	#define WDEV(x) (((x)<<1) & 0x0006u) /* event generated on roll over */
638	#else
639	#define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */
640	#endif /* _MISRA_RULES */
641
642	#define WDEV_RESET 0x0000 /* generate reset event on roll over */
643	#define WDEV_NMI 0x0002 /* generate NMI event on roll over */
644	#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */
645	#define WDEV_NONE 0x0006 /* no event on roll over */
646	#define WDEN 0x0FF0 /* enable watchdog */
647	#define WDDIS 0x0AD0 /* disable watchdog */
648	#define WDRO 0x8000 /* watchdog rolled over latch */
649
650	/* depreciated WDOG_CTL Register Masks for legacy code */
651	#define ICTL WDEV
652	#define ENABLE_RESET WDEV_RESET
653	#define WDOG_RESET WDEV_RESET
654	#define ENABLE_NMI WDEV_NMI
655	#define WDOG_NMI WDEV_NMI
656	#define ENABLE_GPI WDEV_GPI
657	#define WDOG_GPI WDEV_GPI
658	#define DISABLE_EVT WDEV_NONE
659	#define WDOG_NONE WDEV_NONE
660
661	#define TMR_EN WDEN
662	#define TMR_DIS WDDIS
663	#define TRO WDRO
664	#define ICTL_P0 0x01
665	#define ICTL_P1 0x02
666	#define TRO_P 0x0F
667
668
669	/* ********************************** UART CONTROLLER MASKS ***************************************************/
670
671	/* UARTx_LCR Masks*/
672	#ifdef _MISRA_RULES
673	#define WLS(x) (((x)-5u) & 0x03u) /* Word Length Select */
674	#else
675	#define WLS(x) (((x)-5) & 0x03) /* Word Length Select */
676	#endif /* _MISRA_RULES */
677
678	#define STB 0x04 /* Stop Bits */
679	#define PEN 0x08 /* Parity Enable */
680	#define EPS 0x10 /* Even Parity Select */
681	#define STP 0x20 /* Stick Parity */
682	#define SB 0x40 /* Set Break */
683	#define DLAB 0x80 /* Divisor Latch Access */
684
685	/* UARTx_MCR Mask */
686	#define LOOP_ENA 0x10 /* Loopback Mode Enable */
687
688	/* UARTx_LSR Masks */
689	#define DR 0x01 /* Data Ready */
690	#define OE 0x02 /* Overrun Error */
691	#define PE 0x04 /* Parity Error */
692	#define FE 0x08 /* Framing Error */
693	#define BI 0x10 /* Break Interrupt */
694	#define THRE 0x20 /* THR Empty */
695	#define TEMT 0x40 /* TSR and UART_THR Empty */
696
697	/* UARTx_IER Masks*/
698	#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */
699	#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */
700	#define ELSI 0x04 /* Enable RX Status Interrupt */
701
702	/* UARTx_IIR Masks*/
703	#define NINT 0x01 /* Pending Interrupt */
704	#define STATUS 0x06 /* Highest Priority Pending Interrupt */
705
706	/* UARTx_GCTL Masks*/
707	#define UCEN 0x01 /* Enable UARTx Clocks */
708	#define IREN 0x02 /* Enable IrDA Mode */
709	#define TPOLC 0x04 /* IrDA TX Polarity Change */
710	#define RPOLC 0x08 /* IrDA RX Polarity Change */
711	#define FPE 0x10 /* Force Parity Error On Transmit */
712	#define FFE 0x20 /* Force Framing Error On Transmit */
713
714	/* Bit masks for UART Divisor Latch Registers: UARTx_DLL & UARTx_DLH */
715	#define UARTDLL 0x00FF /* Divisor Latch Low Byte */
716	#define UARTDLH 0xFF00 /* Divisor Latch High Byte */
717
718
719	/****************************** SERIAL PERIPHERAL INTERFACE (SPI) MASKS *************************************/
720
721	/* SPIx_CTL Masks*/
722	#define TIMOD 0x0003 /* Transfer Initiate Mode */
723	#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */
724	#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */
725	#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */
726	#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */
727	#define SZ 0x0004 /* Send Zero (When TDBR Empty, Send Zero/Last) /
728	#define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard) /
729	#define PSSE 0x0010 /* Slave-Select Input Enable */
730	#define EMISO 0x0020 /* Enable MISO As Output */
731	#define SIZE 0x0100 /* Size of Words (16/8* Bits) */
732	#define LSBF 0x0200 /* LSB First */
733	#define CPHA 0x0400 /* Clock Phase */
734	#define CPOL 0x0800 /* Clock Polarity */
735	#define MSTR 0x1000 /* Master/Slave* */
736	#define WOM 0x2000 /* Write Open Drain Master */
737	#define SPE 0x4000 /* SPI Enable */
738
739	/* SPIx_FLG Masks*/
740	#define FLS1 0x0002 /* Enables SPI_FLOUT1 as SPI Slave-Select Output */
741	#define FLS2 0x0004 /* Enables SPI_FLOUT2 as SPI Slave-Select Output */
742	#define FLS3 0x0008 /* Enables SPI_FLOUT3 as SPI Slave-Select Output */
743	#define FLS4 0x0010 /* Enables SPI_FLOUT4 as SPI Slave-Select Output */
744	#define FLS5 0x0020 /* Enables SPI_FLOUT5 as SPI Slave-Select Output */
745	#define FLS6 0x0040 /* Enables SPI_FLOUT6 as SPI Slave-Select Output */
746	#define FLS7 0x0080 /* Enables SPI_FLOUT7 as SPI Slave-Select Output */
747	#define FLG1 0xFDFF /* Activates SPI_FLOUT1 */
748	#define FLG2 0xFBFF /* Activates SPI_FLOUT2 */
749	#define FLG3 0xF7FF /* Activates SPI_FLOUT3 */
750	#define FLG4 0xEFFF /* Activates SPI_FLOUT4 */
751	#define FLG5 0xDFFF /* Activates SPI_FLOUT5 */
752	#define FLG6 0xBFFF /* Activates SPI_FLOUT6 */
753	#define FLG7 0x7FFF /* Activates SPI_FLOUT7 */
754
755	/* SPIx_STAT Masks*/
756	#define SPIF 0x0001 /* SPI Finished (Single-Word Transfer Complete) */
757	#define MODF 0x0002 /* Mode Fault Error (Another Device Tried To Become Master) */
758	#define TXE 0x0004 /* Transmission Error (Data Sent With No New Data In TDBR) */
759	#define TXS 0x0008 /* SPI_TDBR Data Buffer Status (Full/Empty) /
760	#define RBSY 0x0010 /* Receive Error (Data Received With RDBR Full) */
761	#define RXS 0x0020 /* SPI_RDBR Data Buffer Status (Full/Empty) /
762	#define TXCOL 0x0040 /* Transmit Collision Error (Corrupt Data May Have Been Sent) */
763
764
765	/********************************* GENERAL PURPOSE TIMER MASKS **********************************************/
766	/* TIMER_ENABLE Masks*/
767	#define TIMEN0 0x0001 /* Enable Timer 0 */
768	#define TIMEN1 0x0002 /* Enable Timer 1 */
769	#define TIMEN2 0x0004 /* Enable Timer 2 */
770
771	/* TIMER_DISABLE Masks*/
772	#define TIMDIS0 TIMEN0 /* Disable Timer 0 */
773	#define TIMDIS1 TIMEN1 /* Disable Timer 1 */
774	#define TIMDIS2 TIMEN2 /* Disable Timer 2 */
775
776	/* TIMER_STATUS Masks*/
777	#define TIMIL0 0x00000001 /* Timer 0 Interrupt */
778	#define TIMIL1 0x00000002 /* Timer 1 Interrupt */
779	#define TIMIL2 0x00000004 /* Timer 2 Interrupt */
780	#define TOVF_ERR0 0x00000010 /* Timer 0 Counter Overflow */
781	#define TOVF_ERR1 0x00000020 /* Timer 1 Counter Overflow */
782	#define TOVF_ERR2 0x00000040 /* Timer 2 Counter Overflow */
783	#define TRUN0 0x00001000 /* Timer 0 Slave Enable Status */
784	#define TRUN1 0x00002000 /* Timer 1 Slave Enable Status */
785	#define TRUN2 0x00004000 /* Timer 2 Slave Enable Status */
786
787	/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
788	#define TOVL_ERR0 TOVF_ERR0
789	#define TOVL_ERR1 TOVF_ERR1
790	#define TOVL_ERR2 TOVF_ERR2
791
792	/* TIMERx_CONFIG Masks */
793	#define PWM_OUT 0x0001 /* Pulse-Width Modulation Output Mode */
794	#define WDTH_CAP 0x0002 /* Width Capture Input Mode */
795	#define EXT_CLK 0x0003 /* External Clock Mode */
796	#define PULSE_HI 0x0004 /* Action Pulse (Positive/Negative) /
797	#define PERIOD_CNT 0x0008 /* Period Count */
798	#define IRQ_ENA 0x0010 /* Interrupt Request Enable */
799	#define TIN_SEL 0x0020 /* Timer Input Select */
800	#define OUT_DIS 0x0040 /* Output Pad Disable */
801	#define CLK_SEL 0x0080 /* Timer Clock Select */
802	#define TOGGLE_HI 0x0100 /* PWM_OUT PULSE_HI Toggle Mode */
803	#define EMU_RUN 0x0200 /* Emulation Behavior Select */
804	#define ERR_TYP 0xC000 /* Error Type */
805
806
807	/* *********************************** GPIO PORTS F, G MASKS ********************************************/
808
809	/* General Purpose IO Masks */
810	/* Port F Masks */
811	#define PF0 0x0001
812	#define PF1 0x0002
813	#define PF2 0x0004
814	#define PF3 0x0008
815	#define PF4 0x0010
816	#define PF5 0x0020
817	#define PF6 0x0040
818	#define PF7 0x0080
819	#define PF8 0x0100
820	#define PF9 0x0200
821	#define PF10 0x0400
822	#define PF11 0x0800
823	#define PF12 0x1000
824	#define PF13 0x2000
825	#define PF14 0x4000
826	#define PF15 0x8000
827
828	/* Port G Masks */
829	#define PG0 0x0001
830	#define PG1 0x0002
831	#define PG2 0x0004
832	#define PG3 0x0008
833	#define PG4 0x0010
834	#define PG5 0x0020
835	#define PG6 0x0040
836	#define PG7 0x0080
837	#define PG8 0x0100
838	#define PG9 0x0200
839	#define PG10 0x0400
840	#define PG11 0x0800
841	#define PG12 0x1000
842	#define PG13 0x2000
843	#define PG14 0x4000
844	#define PG15 0x8000
845
846	/* ************************************ SERIAL PORT MASKS ***************************************************/
847	/* SPORT_GATECLK Masks */
848	#define SPORT0_GATECLK_EN 0x0001 /* SPORT0 Clock Gating Enable */
849	#define SPORT0_GATECLK_MODE 0x0002 /* SPORT0 Clock Gating Mode */
850	#define SPORT0_GATECLK_STATE 0x0004 /* SPORT0 Clock Gating State */
851	#define SPORT1_GATECLK_EN 0x0010 /* SPORT1 Clock Gating Enable */
852	#define SPORT1_GATECLK_MODE 0x0020 /* SPORT1 Clock Gating Mode */
853	#define SPORT1_GATECLK_STATE 0x0040 /* SPORT1 Clock Gating State */
854
855	/* SPORTx_TCR1 Masks */
856	#define TSPEN 0x0001 /* Transmit Enable */
857	#define ITCLK 0x0002 /* Internal Transmit Clock Select */
858	#define DTYPE_NORM 0x0004 /* Data Format Normal */
859	#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */
860	#define DTYPE_ALAW 0x000C /* Compand Using A-Law */
861	#define TLSBIT 0x0010 /* Transmit Bit Order */
862	#define ITFS 0x0200 /* Internal Transmit Frame Sync Select */
863	#define TFSR 0x0400 /* Transmit Frame Sync Required Select */
864	#define DITFS 0x0800 /* Data-Independent Transmit Frame Sync Select */
865	#define LTFS 0x1000 /* Low Transmit Frame Sync Select */
866	#define LATFS 0x2000 /* Late Transmit Frame Sync Select */
867	#define TCKFE 0x4000 /* Clock Falling Edge Select */
868
869	/* SPORTx_TCR2 Masks and Macro */
870	#ifdef _MISRA_RULES
871	#define SLEN(x) ((x)&0x1Fu) /* SPORT TX Word Length (2 - 31) */
872	#else
873	#define SLEN(x) ((x)&0x1F) /* SPORT TX Word Length (2 - 31) */
874	#endif /* _MISRA_RULES */
875
876	#define TXSE 0x0100 /* TX Secondary Enable */
877	#define TSFSE 0x0200 /* Transmit Stereo Frame Sync Enable */
878	#define TRFST 0x0400 /* Left/Right Order (1 = Right Channel 1st) */
879
880	/* SPORTx_RCR1 Masks */
881	#define RSPEN 0x0001 /* Receive Enable */
882	#define IRCLK 0x0002 /* Internal Receive Clock Select */
883	#define DTYPE_NORM 0x0004 /* Data Format Normal */
884	#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */
885	#define DTYPE_ALAW 0x000C /* Compand Using A-Law */
886	#define RLSBIT 0x0010 /* Receive Bit Order */
887	#define IRFS 0x0200 /* Internal Receive Frame Sync Select */
888	#define RFSR 0x0400 /* Receive Frame Sync Required Select */
889	#define LRFS 0x1000 /* Low Receive Frame Sync Select */
890	#define LARFS 0x2000 /* Late Receive Frame Sync Select */
891	#define RCKFE 0x4000 /* Clock Falling Edge Select */
892
893	/* SPORTx_RCR2 Masks */
894	#ifdef _MISRA_RULES
895	#define SLEN(x) ((x)&0x1Fu) /* SPORT RX Word Length (2 - 31) */
896	#else
897	#define SLEN(x) ((x)&0x1F) /* SPORT RX Word Length (2 - 31) */
898	#endif /* _MISRA_RULES */
899
900	#define RXSE 0x0100 /* RX Secondary Enable */
901	#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */
902	#define RRFST 0x0400 /* Right-First Data Order */
903
904	/* SPORTx_STAT Masks */
905	#define RXNE 0x0001 /* Receive FIFO Not Empty Status */
906	#define RUVF 0x0002 /* Sticky Receive Underflow Status */
907	#define ROVF 0x0004 /* Sticky Receive Overflow Status */
908	#define TXF 0x0008 /* Transmit FIFO Full Status */
909	#define TUVF 0x0010 /* Sticky Transmit Underflow Status */
910	#define TOVF 0x0020 /* Sticky Transmit Overflow Status */
911	#define TXHRE 0x0040 /* Transmit Hold Register Empty */
912
913	/* SPORTx_MCMC1 Macros */
914	#ifdef _MISRA_RULES
915	#define WOFF(x) ((x) & 0x3FFu) /* Multichannel Window Offset Field */
916	/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits*/
917	#define WSIZE(x) (((((x)>>0x3)-1u)&0xFu) << 0xC) /* Multichannel Window Size = (x/8)-1 */
918	#else
919	#define WOFF(x) ((x) & 0x3FF) /* Multichannel Window Offset Field */
920	/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits */
921	#define WSIZE(x) (((((x)>>0x3)-1)&0xF) << 0xC) /* Multichannel Window Size = (x/8)-1 */
922	#endif /* _MISRA_RULES */
923
924	/* SPORTx_MCMC2 Masks */
925	#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */
926	#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */
927	#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */
928	#define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */
929	#define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */
930	#define MCMEN 0x0010 /* Multichannel Frame Mode Enable */
931	#define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */
932	#define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */
933	#define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */
934	#define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */
935	#define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */
936	#define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */
937	#define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */
938	#define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */
939	#define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */
940	#define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */
941	#define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */
942	#define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */
943	#define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */
944	#define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */
945	#define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */
946	#define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */
947	#define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */
948
949
950	/************************************** DMA CONTROLLER MASKS ************************************************/
951
952	/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */
953	#define DMAEN 0x0001 /* DMA Channel Enable */
954	#define WNR 0x0002 /* Channel Direction (W/R) /
955	#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */
956	#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */
957	#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */
958	#define DMA2D 0x0010 /* DMA Mode (2D/1D) /
959	#define SYNC 0x0020 /* DMA Buffer Clear */
960	#define DI_SEL 0x0040 /* Data Interrupt Timing Select */
961	#define DI_EN 0x0080 /* Data Interrupt Enable */
962	#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
963	#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
964	#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
965	#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
966	#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */
967	#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */
968	#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */
969	#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
970	#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
971	#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
972	#define FLOW_STOP 0x0000 /* Stop Mode */
973	#define FLOW_AUTO 0x1000 /* Autobuffer Mode */
974	#define FLOW_ARRAY 0x4000 /* Descriptor Array Mode */
975	#define FLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
976	#define FLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
977
978	/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
979	#define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral) /
980	#define PMAP 0xF000 /* Peripheral Mapped To This Channel */
981	#define PMAP_PPI 0x0000 /* PPI Port DMA */
982	#define PMAP_SPORT0RX 0x1000 /* SPORT0 Receive DMA */
983	#define PMAP_SPORT0TX 0x2000 /* SPORT0 Transmit DMA */
984	#define PMAP_SPORT1RX 0x3000 /* SPORT1 Receive DMA */
985	#define PMAP_SPORT1TX 0x4000 /* SPORT1 Transmit DMA */
986	#define PMAP_SPI0 0x5000 /* SPI0 Transmit/Receive DMA */
987	#define PMAP_SPI1 0x6000 /* SPI1 Transmit/Receive DMA */
988	#define PMAP_UART0RX 0x7000 /* UART0 Port Receive DMA */
989	#define PMAP_UART0TX 0x8000 /* UART0 Port Transmit DMA */
990
991	/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */
992	#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */
993	#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */
994	#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */
995	#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */
996
997
998	/******************************* PARALLEL PERIPHERAL INTERFACE (PPI) MASKS ***********************************/
999
1000	/* PPI_CONTROL Masks */
1001	#define PORT_EN 0x0001 /* PPI Port Enable */
1002	#define PORT_DIR 0x0002 /* PPI Port Direction */
1003	#define XFR_TYPE 0x000C /* PPI Transfer Type */
1004	#define PORT_CFG 0x0030 /* PPI Port Configuration */
1005	#define FLD_SEL 0x0040 /* PPI Active Field Select */
1006	#define PACK_EN 0x0080 /* PPI Packing Mode / / previous versions of defBF532.h erroneously included DMA32 (PPI 32-bit DMA Enable) */
1007	#define SKIP_EN 0x0200 /* PPI Skip Element Enable */
1008	#define SKIP_EO 0x0400 /* PPI Skip Even/Odd Elements */
1009	#define DLEN_8 0x0000 /* Data Length = 8 Bits */
1010	#define DLEN_10 0x0800 /* Data Length = 10 Bits */
1011	#define DLEN_11 0x1000 /* Data Length = 11 Bits */
1012	#define DLEN_12 0x1800 /* Data Length = 12 Bits */
1013	#define DLEN_13 0x2000 /* Data Length = 13 Bits */
1014	#define DLEN_14 0x2800 /* Data Length = 14 Bits */
1015	#define DLEN_15 0x3000 /* Data Length = 15 Bits */
1016	#define DLEN_16 0x3800 /* Data Length = 16 Bits */
1017	#define POLC 0x4000 /* PPI Clock Polarity */
1018	#define POLS 0x8000 /* PPI Frame Sync Polarity */
1019
1020	/* PPI_STATUS Masks */
1021	#define LT_ERR_OVR 0x0100 /* Line Track Overflow Error */
1022	#define LT_ERR_UNDR 0x0200 /* Line Track Underflow Error */
1023	#define FLD 0x0400 /* Field Indicator */
1024	#define FT_ERR 0x0800 /* Frame Track Error */
1025	#define OVR 0x1000 /* FIFO Overflow Error */
1026	#define UNDR 0x2000 /* FIFO Underrun Error */
1027	#define ERR_DET 0x4000 /* Error Detected Indicator */
1028	#define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */
1029
1030
1031	/************************************* TWO-WIRE INTERFACE (TWI) MASKS ***************************************/
1032
1033	/* TWI_CLKDIV Macros (Use: pTWI_CLKDIV = CLKLOW(x)\|CLKHI(y); ) /
1034	#ifdef _MISRA_RULES
1035	#define CLKLOW(x) ((x) & 0xFFu)/* Periods Clock Is Held Low */
1036	#define CLKHI(y) (((y)&0xFFu)<<0x8)/* Periods Before New Clock Low */
1037	#else
1038	#define CLKLOW(x) ((x) & 0xFF)/* Periods Clock Is Held Low */
1039	#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */
1040	#endif /* _MISRA_RULES */
1041
1042	/* TWI_PRESCALE Masks */
1043	#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */
1044	#define TWI_ENA 0x0080 /* TWI Enable */
1045	#define SCCB 0x0200 /* SCCB Compatibility Enable */
1046
1047	/* TWI_SLAVE_CTRL Masks */
1048	#define SEN 0x0001 /* Slave Enable */
1049	#define SADD_LEN 0x0002 /* Slave Address Length */
1050	#define STDVAL 0x0004 /* Slave Transmit Data Valid */
1051	#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
1052	#define GEN 0x0010 /* General Call Adrress Matching Enabled */
1053
1054	/* TWI_SLAVE_STAT Masks */
1055	#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive) /
1056	#define GCALL 0x0002 /* General Call Indicator */
1057
1058	/* TWI_MASTER_CTRL Masks */
1059	#define MEN 0x0001 /* Master Mode Enable */
1060	#define MADD_LEN 0x0002 /* Master Address Length */
1061	#define MDIR 0x0004 /* Master Transmit Direction (RX/TX) /
1062	#define FAST 0x0008 /* Use Fast Mode Timing Specs */
1063	#define STOP 0x0010 /* Issue Stop Condition */
1064	#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */
1065	#define DCNT 0x3FC0 /* Data Bytes To Transfer */
1066	#define SDAOVR 0x4000 /* Serial Data Override */
1067	#define SCLOVR 0x8000 /* Serial Clock Override */
1068
1069	/* TWI_MASTER_STAT Masks */
1070	#define MPROG 0x0001 /* Master Transfer In Progress */
1071	#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */
1072	#define ANAK 0x0004 /* Address Not Acknowledged */
1073	#define DNAK 0x0008 /* Data Not Acknowledged */
1074	#define BUFRDERR 0x0010 /* Buffer Read Error */
1075	#define BUFWRERR 0x0020 /* Buffer Write Error */
1076	#define SDASEN 0x0040 /* Serial Data Sense */
1077	#define SCLSEN 0x0080 /* Serial Clock Sense */
1078	#define BUSBUSY 0x0100 /* Bus Busy Indicator */
1079
1080	/* TWI_INT_SRC and TWI_INT_ENABLE Masks */
1081	#define SINIT 0x0001 /* Slave Transfer Initiated */
1082	#define SCOMP 0x0002 /* Slave Transfer Complete */
1083	#define SERR 0x0004 /* Slave Transfer Error */
1084	#define SOVF 0x0008 /* Slave Overflow */
1085	#define MCOMP 0x0010 /* Master Transfer Complete */
1086	#define MERR 0x0020 /* Master Transfer Error */
1087	#define XMTSERV 0x0040 /* Transmit FIFO Service */
1088	#define RCVSERV 0x0080 /* Receive FIFO Service */
1089
1090	/* TWI_FIFO_CTRL Masks */
1091	#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */
1092	#define RCVFLUSH 0x0002 /* Receive Buffer Flush */
1093	#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */
1094	#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */
1095
1096	/* TWI_FIFO_STAT Masks */
1097	#define XMTSTAT 0x0003 /* Transmit FIFO Status */
1098	#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */
1099	#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */
1100	#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */
1101
1102	#define RCVSTAT 0x000C /* Receive FIFO Status */
1103	#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */
1104	#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */
1105	#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */
1106
1107	#ifdef _MISRA_RULES
1108	#pragma diag(pop)
1109	#endif /* _MISRA_RULES */
1110
1111	#endif /* _DEF_BF59x_H */

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: trunk/libs/newlib/src/libgloss/bfin/include/defBF59x_base.h @ 603

Download in other formats: