source: trunk/libs/newlib/src/libgloss/epiphany/Makefile.in @ 523

# Makefile for libgloss/epiphany

# Copyright (c) 2011, 2012 Adapteva, Inc.
# All rights reserved.

# Contributor Jeremy Bennett <jeremy.bennett@embecosm.com> for Adapteva Inc

# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#  * Redistributions of source code must retain the above copyright notice,
#    this list of conditions and the following disclaimer.
#  * Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
#  * Neither the name of Adapteva nor the names of its contributors may be
#    used to endorse or promote products derived from this software without
#    specific prior written permission.

# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.

# Standard proforma copied from libnosys
DESTDIR =
VPATH = @srcdir@
srcdir = @srcdir@
objdir = .
srcroot = $(srcdir)/../..
objroot = $(objdir)/../..

prefix = @prefix@
exec_prefix = @exec_prefix@

host_alias = @host_alias@
target_alias = @target_alias@
program_transform_name = @program_transform_name@

bindir = @bindir@
libdir = @libdir@
tooldir = $(exec_prefix)/$(target_alias)

# Multilib support variables.
# TOP is used instead of MULTI{BUILD,SRC}TOP.
MULTIDIRS =
MULTISUBDIR =
MULTIDO = true
MULTICLEAN = true

INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@

SHELL = /bin/sh

CC = @CC@

#AS = @AS@
AS = `if [ -f ${objroot}/../gas/as-new ] ; \
        then echo ${objroot}/../gas/as-new ; \
        else echo as ; fi`

AR = @AR@

#LD = @LD@
LD = `if [ -f ${objroot}/../ld/ld-new ] ; \
        then echo ${objroot}/../ld/ld-new ; \
        else echo ld ; fi`

RANLIB = @RANLIB@

OBJDUMP = `if [ -f ${objroot}/../binutils/objdump ] ; \
        then echo ${objroot}/../binutils/objdump ; \
        else t='$(program_transform_name)'; echo objdump | sed -e $$t ; fi`
OBJCOPY = `if [ -f ${objroot}/../binutils/objcopy ] ; \
        then echo ${objroot}/../binutils/objcopy ; \
        else t='$(program_transform_name)'; echo objcopy | sed -e $$t ; fi`

GCC_LDFLAGS = `if [ -d ${objroot}/../gcc ] ; \
        then echo -L${objroot}/../gcc ; fi`

NEWLIB_CFLAGS = `if [ -d ${objroot}/newlib ]; then echo -I${objroot}/newlib/targ-include -I${srcroot}/newlib/libc/include; fi`
NEWLIB_LDFLAGS = `if [ -d ${objroot}/newlib ]; then echo -B${objroot}/newlib/ -L${objroot}/newlib/; fi`

INCLUDES = -I. -I$(srcdir)/.. -I$(srcdir)/../../newlib/libc/machine/epiphany

# Note that when building the library, ${MULTILIB} is not the way multilib
# options are passed; they're passed in $(CFLAGS).
CFLAGS_FOR_TARGET = ${MULTILIB} ${INCLUDES} ${NEWLIB_CFLAGS}
LDFLAGS_FOR_TARGET = ${MULTILIB} ${NEWLIB_LDFLAGS}
AR_FLAGS = qc

.c.o:
        $(CC) $(CFLAGS_FOR_TARGET) -O2 $(INCLUDES) -c $(CFLAGS) $<

.C.o:
        $(CC) $(CFLAGS_FOR_TARGET) -O2 $(INCLUDES) -c $(CFLAGS) $<
.S.o:
        $(CC) $(CFLAGS_FOR_TARGET) $(INCLUDES) -c $(CFLAGS) $<
.s.o:
        $(AS) $(ASFLAGS_FOR_TARGET) $(INCLUDES) $(ASFLAGS) -o $*.o $<

#
# GCC knows to run the preprocessor on .S files before it assembles them.
#
.S.o:
        $(CC) $(CFLAGS_FOR_TARGET) $(INCLUDES) $(CFLAGS) -c $<

#
# this is a bogus target that'll produce an assembler from the
# C source with the right compiler options. this is so we can
# track down code generation or debug symbol bugs.
#
.c.s:
        $(CC) $(CFLAGS_FOR_TARGET) -S $(INCLUDES) $(CFLAGS) $<

# EPIPHANY specific stuff

# Object files needed for all libraries
COMMON_OBJS = access.o  \
              close.o    \
              environ.o  \
              execve.o   \
              fork.o     \
              fstat.o    \
              getpid.o   \
              gettimeofday.o \
              _isatty.o  \
              kill.o     \
              link.o     \
              lseek.o    \
              open.o     \
              read.o     \
              sbrk.o     \
              stat.o     \
              times.o    \
              unlink.o   \
              wait.o     \
              write.o    \
              _exit.o    \
              epiphany-syscalls.o \
              epiphany-ivthandlers.o

UNUSED_OBJS = chown.o    \
              errno.o    \
              gettod.o   \
              readlink.o \
              symlink.o

# Object files specific to particular targets.
SIMOBJS = $(COMMON_OBJS)

OUTPUTS = libepiphany.a crt0.o

all: $(OUTPUTS)

#
# here's where we build the library for each target
#

libepiphany.a: $(SIMOBJS)
        ${AR} ${ARFLAGS} $@ $(SIMOBJS)
        ${RANLIB} $@

_exit.o: _exit.S
        $(CC) $(CFLAGS_FOR_TARGET) $(INCLUDES) $(CFLAGS) -c $<

doc:

clean mostlyclean:
        rm -f $(OUTPUTS) *.i *~ *.o *-test *.srec *.dis *.map *.x

distclean maintainer-clean realclean: clean
        rm -f Makefile config.status $(OUTPUTS)

.PHONY: install info install-info clean-info
install:
        @for outputs in ${OUTPUTS}; do\
         mkdir -p $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}; \
         $(INSTALL_PROGRAM) $${outputs} $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}; \
        done
info:
install-info:
clean-info:

Makefile: Makefile.in config.status @host_makefile_frag_path@
        $(SHELL) config.status

config.status: configure
        $(SHELL) config.status --recheck