source: trunk/libs/newlib/src/libgloss/hp74x/Makefile.in @ 467

Last change on this file since 467 was 444, checked in by satin@…, 6 years ago

add newlib,libalmos-mkh, restructure shared_syscalls.h and mini-libc

File size: 6.1 KB
Line 
1#
2# Makefile
3#   Copyright (C) 1990, 1991, 1992, 1993 ,1994 Free Software Foundation
4#
5# This file is free software; you can redistribute it and/or modify
6# it under the terms of the GNU General Public License as published by
7# the Free Software Foundation; either version 2 of the License, or
8# (at your option) any later version.
9#
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY; without even the implied warranty of
12# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13# GNU General Public License for more details.
14#
15# You should have received a copy of the GNU General Public License
16# along with this program; if not, write to the Free Software
17# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
18#
19
20#
21# Makefile for newlib/libc/stub/hppa. This is the board support code
22# for the HP-PRO hppa embedded boards. <rob@cygnus.com>
23#
24
25DESTDIR =
26VPATH = @srcdir@
27srcdir = @srcdir@
28objdir = .
29srcroot = $(srcdir)/../..
30objroot = $(objdir)/../..
31
32prefix = @prefix
33exec_prefix = @exec_prefix@
34
35bindir = @bindir@
36libdir = @libdir@
37tooldir = $(exec_prefix)/$(target_alias)
38
39INSTALL = @INSTALL@
40INSTALL_PROGRAM = @INSTALL_PROGRAM@
41INSTALL_DATA = @INSTALL_DATA@
42
43SHELL = /bin/sh
44
45CC = @CC@
46
47AS = @AS@
48AR = @AR@
49LD = @LD@
50RANLIB = @RANLIB@
51
52#
53# As the boot process only deals with LIF volumes, here's the src
54# where we borrow existing code modules and where we put our
55# boot image if we can bvuild one.
56#
57LIF_SRC = /usr/tftpdir/srcboot.lif
58LIF_DEST = /usr/tftpdir/romboot.lif
59
60HPDEFS = -D_INCLUDE_POSIX_SOURCE -D_INCLUDE_XOPEN_SOURCE \
61         -D_INCLUDE_HPUX_SOURCE -DPCXT
62
63LIBS_FOR_TARGET = -lc
64
65#
66# The original flags used by HP for the boot ROMS were
67# CFLAGS_FOR_TARGET = -c -Aa +O3 +OS -Wc,-DA1.0 -Wc,-DS1.0 +ESfic +ESsfc ${HPDEFS}
68CFLAGS_FOR_TARGET = -c -Wd,-a -g
69# the original value for -R was 0
70LDFLAGS_FOR_TARGET =  -v -t -N -R 10000 -a archive
71INCLUDES = -I${srcdir}
72
73BSP_OBJS= pa_stub.o debugger.o iva_table.o io.o
74STUBCRT0=crt0.o
75STUBLIB=hppa.o
76LDSCRIPT=hppa.ld
77SHARED_DIR=
78SHARED_OBJS=
79# SHARED_OBJS=$(SHARED_DIR)
80
81# Host specific makefile fragment comes in here.
82@host_makefile_frag@
83
84all: boot
85
86# this target is only for testing
87test: ${STUBCRT0} $(STUBLIB) test.o $(BSP_OBJS)
88#       ${LD} $(LDFLAGS_FOR_TARGET) ${STUBCRT0} test.o $(BSP_OBJS) -o test $(LIBS_FOR_TARGET)
89        rootme=`pwd` ; \
90        ${LD} $(LDFLAGS_FOR_TARGET) ${STUBCRT0} test.o pa_stub.o debugger.o iva_table.o io.o -o test $(LIBS_FOR_TARGET)
91
92$(STUBLIB): $(BSP_OBJS)
93        ${LD} -r $(BSP_OBJS) $(SHARED_OBJS) -o $(STUBLIB)
94
95checksum: $(srcdir)/checksum.c
96        $(CC) -g $(srcdir)/checksum.c -o checksum
97
98# this is the target from HP's Makefile, it may be bogus
99hpstub: $(OBJS)
100        $(LD) $(LDFLAGS_FOR_TARGET) -e main -o $@ $(LIBRARY)/crt1.o \
101        $(OBJS) -lc -m >stub.map
102
103install:
104        $(INSTALL_PROGRAM) $(STUBLIB) $(DESTDIR)$(tooldir)/lib/$(MULTISUBDIR)$(STUBLIB)
105        $(INSTALL_PROGRAM) $(SHARED_DIR)/$(STUBCRT0) $(DESTDIR)$(tooldir)/lib/$(MULTISUBDIR)$(STUBCRT0)
106        $(INSTALL_PROGRAM) $(srcdir)/$(LDSCRIPT) $(DESTDIR)$(tooldir)/lib/$(LDSCRIPT)
107
108.c.o:
109        $(CC) $(CFLAGS_FOR_TARGET) $(INCLUDES) -c $<
110
111.c.s:
112        $(CC) $(CFLAGS_FOR_TARGET) -S $(INCLUDES) $<
113#       $(CC) $(CFLAGS_FOR_TARGET) $(NEWLIB_CFLAGS) $(INCLUDES) -c $<
114
115.s.o:
116        $(CC) $(CFLAGS_FOR_TARGET) $(INCLUDES) -c $<
117#       $(AS) $(CFLAGS_FOR_TARGET) $(INCLUDES) -c $<
118
119.SUFFIXES: .S .c .o .s .lif
120#
121# lifinit --
122#       -vnnn   Sets volume size to nnn bytes.
123#               nnn must be a multiple of 256.
124#       -d      Sets directory size to nnn file entries.
125#               nnn must be a multiple of 8.
126#       -nsss   Sets the volume name to be sss.
127#       -Knnn   Forces the directory start location to be the
128#               nearest multiple of nnn x 1024 bytes.
129#       -snnn   set the initial system load (ISL) start address to
130#               nnn in the volume label
131#       -lnnn   Specifies the length in bytes of the ISL code.
132#       -ennn   Set the ISL entry point to nnn bytes from the
133#               beginning of the ISL
134#
135# lifcp --
136#       -r      Forces RAW mode copying.
137#       -T      Sets the file type of the directory entry.
138#               ASCII is 1
139#               BIN is -23951
140#               BINARY is -2
141#       -Knnn   forces each file copied in to begin on a nnn x
142#               1024-byte boundary from the beginning of the volume
143#       Note: the word echoed below MUST be 10 characters exactly.
144#
145# somxtract infile outfile --
146#       converts a series 800 file *only* into a raw image
147#
148LIF_VOL = this_lif
149# 65532
150boot: test checksum
151#        FIXME: This fills up the hard disk unless "-R" is used
152        @rm -f ${LIF_VOL} ${LIF_DEST}
153        @ipl_entry=`nm -t d $< | grep "T .START." | sed -e 's/T .START.//' -e 's/^0*//'` ; \
154        echo "Entry point is at $${ipl_entry}" ; \
155        if test x"$${ipl_entry}" != x  ; then \
156        ipl_entry=`expr $${ipl_entry} - 65536` ; \
157        echo "Entry point offset is $${ipl_entry}" ; \
158        cp $< $<.raw ; \
159        rm -f $<.dis ; \
160        objdump -d $< > $<.dis ; \
161        somxtract $< $<.raw ; \
162        ipl_size=`checksum -s $<.raw $<.image  | sed -e 's/ is the.*//'` ; \
163        echo "IPL_SIZE is $${ipl_size}" ; \
164            lifinit -v64000000 -d64 -n"CYGNUS    " -K2 -s4096 -l$${ipl_size} -e$${ipl_entry} ${LIF_DEST} ;\
165            else \
166                echo "ERROR: \$$START\$$ symbol not found" ; \
167            fi
168        @chmod a+rw $<.image
169        @lifcp -r -K2 $<.image ${LIF_DEST}:TEST
170        @rm -f $<.image $<.dis
171        @lifls -l ${LIF_DEST}
172        @objdump -d $< > $<.dis
173
174.S.o:
175        rm -f $*.s
176        ${CPP} $< > $*.s
177        $(CC) $(CFLAGS_FOR_TARGET) $(INCLUDES) -c $*.s
178#       $(CC) $(CFLAGS_FOR_TARGET) $(NEWLIB_CFLAGS) $(INCLUDES) -c $<
179
180.c.list:
181        $(CC) $(CFLAGS) $*.c -S
182        $(AS) $(AFLAGS) $*.s -Wa,-l > $*.list
183        rm $*.s
184
185.s.list:
186        $(AS) $(AFLAGS) $*.s -Wa,-l > $*.list
187
188doc:   
189
190clean mostlyclean:
191        rm -f *~ *.map *.list stub romboot.lif a.out *.raw *.image
192        rm -f *.o $(STUBLIB) $(STUBCRT0) checksum *.dis test
193
194distclean maintainer-clean realclean: clean
195        rm -f Makefile config.cache config.log config.status
196       
197pa_stub.o:      $(srcdir)/pa_stub.c
198debugger.o:     $(srcdir)/debugger.s
199iva_table.o:    $(srcdir)/iva_table.s
200io.o:           $(srcdir)/io.c
201crt0.o:         $(srcdir)/crt0.s
202test.o:         $(srcdir)/test.c
203term_in.o:      $(srcdir)/term_in.s
204term_out.o:     $(srcdir)/term_out.s
205term_init.o:    $(srcdir)/term_init.s
206
207.PHONY: info install-info clean-info
208info:
209install-info:
210clean-info:
211
212Makefile: Makefile.in config.status @host_makefile_frag_path@
213        $(SHELL) config.status
214
215config.status: configure
216        $(SHELL) config.status --recheck
Note: See TracBrowser for help on using the repository browser.