source: trunk/libs/newlib/src/libgloss/or1k/interrupts-asm.S @ 603

/* interrupts-asm.S -- interrupt handling for OpenRISC 1000.
 *
 * Copyright (c) 2011, 2012, 2014 Authors
 *
 * Contributor Julius Baxter <juliusbaxter@gmail.com>
 * Contributor Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
 * Contributor Stefan Wallentowitz <stefan.wallentowitz@tum.de>
 *
 * The authors hereby grant permission to use, copy, modify, distribute,
 * and license this software and its documentation for any purpose, provided
 * that existing copyright notices are retained in all copies and that this
 * notice is included verbatim in any distributions. No written agreement,
 * license, or royalty fee is required for any of the authorized uses.
 * Modifications to this software may be copyrighted by their authors
 * and need not follow the licensing terms described here, provided that
 * the new terms are clearly indicated on the first page of each file where
 * they apply.
 */

/* -------------------------------------------------------------------------- */
/*!Generic interrupt handler function for or1k
                                                                              */
/* -------------------------------------------------------------------------- */

#include "include/or1k-asm.h"
#include "include/or1k-sprs.h"

        .extern _or1k_interrupt_handler_table
        .extern _or1k_interrupt_handler_data_ptr_table

/* -------------------------------------------------------------------------- */
/*!Function to call appropriate interrupt handler
                                                                              */
/* -------------------------------------------------------------------------- */

        .section .text
        .global _or1k_interrupt_handler
        .type   _or1k_interrupt_handler,@function

_or1k_interrupt_handler:
        /* Make room on stack, save link address register */
        l.addi  r1,r1,-4
        l.sw    0(r1),r9

        /* Read PICSR */
        l.mfspr r20,r0,OR1K_SPR_PIC_PICSR_ADDR

        /* Load handler table base address */
        // Needs to be callee-saved register
        l.movhi r16,hi(_or1k_interrupt_handler_table)
        l.ori   r16,r16,lo(_or1k_interrupt_handler_table)
        /* Load data pointer table base address */
        // Needs to be callee-saved register
        l.movhi r18,hi(_or1k_interrupt_handler_data_ptr_table)
        l.ori   r18,r18,lo(_or1k_interrupt_handler_data_ptr_table)
#ifdef __OR1K_MULTICORE__
        /* Read the addresses of the arrays of cores */
        /* r7 = (*or1k_interrupt_handler_table)  */
        l.lwz   r16,0(r16)
        /* r12 = (*or1k_interrupt_handler_data_ptr_table)  */
        l.lwz   r18,0(r18)
        /* Generate offset in arrays */
        /* r14 = coreid */
        l.mfspr r14,r0,OR1K_SPR_SYS_COREID_ADDR
        /* r14 = coreid*32*4 = off */
        l.slli  r14,r14,7
        /* r7 = (*or1k_exception_handler_table)[coreid] */
        l.add   r16,r16,r14
        /* r12 = (*or1k_exception_handler_table)[coreid] */
        l.add   r18,r18,r14
#endif

.L0:
        /* Find first set bit in PICSR */
        l.ff1   r4,r20
        /* Any bits set? */
        l.sfne  r4,r0
        /* If none, finish */
        OR1K_DELAYED_NOP(OR1K_INST(l.bnf .L2))
        /* What is IRQ function table offset? */
        l.addi  r22,r4,-1
        l.slli  r6,r22,2
        /* Add this to table bases */
        l.add   r14,r6,r16
        l.add   r13,r6,r18

        /* Fetch handler function address */
        l.lwz   r14,0(r14)

        /* Double check it's valid, compare against INTERRUPT_HANDLER_NOT_SET */
        l.sfne  r14,r0
        /* Skip if no handler: TODO: Indicate interrupt fired but no handler*/
        OR1K_DELAYED_NOP(OR1K_INST(l.bnf .L1))

        /* Call handler, load data pointer */
        OR1K_DELAYED(
                OR1K_INST(l.lwz  r3,0(r13)),
                OR1K_INST(l.jalr r14)
        )

.L1:
        /* Clear bit from PICSR, return to start of checking loop */
        l.ori   r6,r0,1
        l.sll   r6,r6,r22
        OR1K_DELAYED(
                OR1K_INST(l.xor r20,r20,r6),
                OR1K_INST(l.j   .L0)
        )

.L2:
        /* Finish up - write PICSR back, restore r9*/
        l.lwz   r9,0(r1)
        l.mtspr r0,r20,OR1K_SPR_PIC_PICSR_ADDR
        OR1K_DELAYED(
                OR1K_INST(l.addi r1,r1,4),
                OR1K_INST(l.jr   r9)
        )

/* -------------------------------------------------------------------------- */
/*!Function to enable an interrupt handler in the PICMR
                                                                              */
/* -------------------------------------------------------------------------- */
        .global or1k_interrupt_enable
        .type   or1k_interrupt_enable,@function

        /* r3 should have IRQ line for peripheral */
or1k_interrupt_enable:
        l.addi  r1,r1,-4
        l.sw    0(r1),r4
        l.ori   r4,r0,0x1
        l.sll   r4,r4,r3
        l.mfspr r3,r0,OR1K_SPR_PIC_PICMR_ADDR
        l.or    r3,r3,r4
        l.mtspr r0,r3,OR1K_SPR_PIC_PICMR_ADDR
        l.lwz   r4,0(r1)
        OR1K_DELAYED(
                OR1K_INST(l.addi        r1,r1,4),
                OR1K_INST(l.jr  r9)
        )

/* -------------------------------------------------------------------------- */
/*!Function to disable an interrupt handler in the PICMR
                                                                              */
/* -------------------------------------------------------------------------- */
        .global or1k_interrupt_disable
        .type   or1k_interrupt_disable,@function

        /* r3 should have IRQ line for peripheral */
or1k_interrupt_disable:
        l.addi  r1,r1,-4
        l.sw    0(r1),r4
        l.ori   r4,r0,0x1
        l.sll   r4,r4,r3
        l.xori  r4,r4,0xffff
        l.mfspr r3,r0,OR1K_SPR_PIC_PICMR_ADDR
        l.and   r3,r3,r4
        l.mtspr r0,r3,OR1K_SPR_PIC_PICMR_ADDR
        l.lwz   r4,0(r1)
        OR1K_DELAYED(
                OR1K_INST(l.addi r1,r1,4),
                OR1K_INST(l.jr   r9)
        )