source: trunk/libs/newlib/src/libgloss/rl78/crt0.S @ 643

/* Copyright (c) 2011 Red Hat Incorporated.
   All rights reserved.

   Redistribution and use in source and binary forms, with or without
   modification, are permitted provided that the following conditions
   are met: 

     Redistributions of source code must retain the above copyright 
     notice, this list of conditions and the following disclaimer.

     Redistributions in binary form must reproduce the above copyright
     notice, this list of conditions and the following disclaimer in the
     documentation and/or other materials provided with the distribution.

     The name of Red Hat Incorporated may not be used to endorse 
     or promote products derived from this software without specific 
     prior written permission.

   This software is provided by the copyright holders and contributors
   "AS IS" and any express or implied warranties, including, but not
   limited to, the implied warranties of merchantability and fitness for
   a particular purpose are disclaimed.  In no event shall Red Hat
   incorporated be liable for any direct, indirect, incidental, special,
   exemplary, or consequential damages (including, but not limited to,
   procurement of substitute goods or services; loss of use, data, or
   profits; or business interruption) however caused and on any theory of
   liability, whether in contract, strict liability, or tort (including
   negligence or otherwise) arising in any way out of the use of this
   software, even if advised of the possibility of such damage.  */

#include "rl78-sys.h"

        .section ".vec","a"
        .short  _start

        .section ".ivec","a"
        .macro  _iv     x
        .weak   \x
        .short  \x
        .endm
#define IV(x) _iv _##x##_handler
#define IVx() .short 0

        /* To use a vector, simply define a global function named foo_handler()
           for any IV(foo) listed below (i.e. tm05_handler) */

        .global _interrupt_vector_table
_interrupt_vector_table:
        IV(wdti)
        IV(lvi)
        IV(p0)
        IV(p1)
        IV(p2)
        IV(p3)
        IV(p4)
        IV(p5)

        IV(st2)
        IV(sr2)
        IV(sre2)
        IV(dma0)
        IV(dma1)
        IV(st0)
        IV(sr0)
        IV(tm01h)

        IV(st1)
        IV(sr1)
        IV(sre1)
        IV(iica0)
        IV(tm00)
        IV(tm01)
        IV(tm02)
        IV(tm03)

        IV(ad)
        IV(rtc)
        IV(it)
        IV(kr)
        IV(st3)
        IV(sr3)
        IV(tm13)
        IV(tm04)

        IV(tm05)
        IV(tm06)
        IV(tm07)
        IV(p6)
        IV(p7)
        IV(p8)
        IV(p9)
        IV(p10)

        IV(p11)
        IV(tm10)
        IV(tm12)
        IV(sre3)
        IV(tm13h)
        IV(md)
        IV(iica1)
        IV(fl)

        IV(dma2)
        IV(dma3)
        IV(tm14)
        IV(tm15)
        IV(tm16)
        IV(tm17)
        IVx()
        IVx()

        IVx()
        IVx()
        IVx()
        IVx()
        IVx()
        IV(brk)
        /* Note: 126 vectors */

        .section ".csstart", "ax"
        .global __csstart
__csstart:      
        br      !!_start

        .weak   __rl78_option_byte_0
        .weak   __rl78_option_byte_1
        .weak   __rl78_option_byte_2
        .weak   __rl78_option_byte_3
__rl78_option_byte_0 = 0x6e
__rl78_option_byte_1 = 0xff
__rl78_option_byte_2 = 0xe8
__rl78_option_byte_3 = 0x85

        .section ".opt", "a"
        .byte   __rl78_option_byte_0
        .byte   __rl78_option_byte_1
        .byte   __rl78_option_byte_2
        .byte   __rl78_option_byte_3

        .text

        .global _start
        .type   _start, @function
_start:
        movw    sp, #__stack


;; block move to initialize .data

        mov     es, #0
        movw    bc, #__romdatacopysize
1:      
        movw    ax, bc
        cmpw    ax, #0
        bz      $1f
        decw    bc
        decw    bc
        movw    ax, es:__romdatastart[bc]
        movw    __datastart[bc], ax
        br      $1b
1:      
        
        mov     es, #0
        movw    bc, #__romsaddrcopysize
1:      
        movw    ax, bc
        cmpw    ax, #0
        bz      $1f
        decw    bc
        decw    bc
        movw    ax, es:__romsaddrstart[bc]
        movw    __saddrstart[bc], ax
        br      $1b
1:      


;; block fill to .bss

        movw    bc, #__bsssize
        movw    ax, #0
        cmpw    ax, bc
        bz      $_bss_zero_done
1:
        decw    bc
        decw    bc
        movw    __bssstart[bc], ax
        cmpw    ax, bc
        bnz      $1b

_bss_zero_done:

        call    !!__rl78_init

#ifdef PROFILE_SUPPORT  /* Defined in gcrt0.S.  */
        movw    ax, # _start
        push    ax
        movw    ax, # _etext
        push    ax
        call    !!__monstartup
#endif

        movw    ax, #0
        push    ax      /* envp */
        push    ax      /* argv */
        push    ax      /* argc */
        call    !!_main
.LFE2:
        
        movw    ax, r8       ; Save return code.
        push    ax

#ifdef PROFILE_SUPPORT
        call    !!__mcleanup
#endif

        call    !!_exit

        .size   _start, . - _start

        .global _rl78_run_preinit_array
        .type   _rl78_run_preinit_array,@function
_rl78_run_preinit_array:
        movw    hl, #__preinit_array_start
        movw    de, #__preinit_array_end
        movw    bc, #-2
        br      $_rl78_run_inilist

        .global _rl78_run_init_array
        .type   _rl78_run_init_array,@function
_rl78_run_init_array:
        movw    hl, #__init_array_start
        movw    de, #__init_array_end
        movw    bc, #2
        br      $_rl78_run_inilist

        .global _rl78_run_fini_array
        .type   _rl78_run_fini_array,@function
_rl78_run_fini_array:
        movw    hl, #__fini_array_start
        movw    de, #__fini_array_end
        movw    bc, #-2
        /* fall through */

        ;; HL = start of list
        ;; DE = end of list
        ;; BC = step direction (+2 or -2)
_rl78_run_inilist:
next_inilist:
        movw    ax, hl
        cmpw    ax, de
        bz      $done_inilist
        movw    ax, [hl]
        cmpw    ax, #-1
        bz      $skip_inilist
        cmpw    ax, #0
        bz      $skip_inilist
        push    ax
        push    bc
        push    de
        push    hl
        call    ax
        pop     hl
        pop     de
        pop     bc
        pop     ax
skip_inilist:
        movw    ax, hl
        addw    ax, bc
        movw    hl, ax
        br      $next_inilist
done_inilist:
        ret

        .section        .init,"ax"

        .global __rl78_init
__rl78_init:

        .section        .fini,"ax"

        .global __rl78_fini
__rl78_fini:
        call    !!_rl78_run_fini_array

        .section .data
        .global ___dso_handle
        .weak   ___dso_handle
___dso_handle:
        .long   0

;;; Provide Dwarf unwinding information that will help GDB stop
;;; backtraces at the right place.  This is stolen from assembly
;;; code generated by GCC with -dA.
        .section        .debug_frame,"",@progbits
.Lframe0:
        .4byte  .LECIE0-.LSCIE0 ; Length of Common Information Entry
.LSCIE0:
        .4byte  0xffffffff      ; CIE Identifier Tag
        .byte   0x1     ; CIE Version
        .ascii "\0"     ; CIE Augmentation
        .uleb128 0x1    ; CIE Code Alignment Factor
        .sleb128 -1     ; CIE Data Alignment Factor
        .byte   0xd     ; CIE RA Column
        .byte   0xc     ; DW_CFA_def_cfa
        .uleb128 0xc
        .uleb128 0x3
        .byte   0x8d    ; DW_CFA_offset, column 0xd
        .uleb128 0x3
        .p2align 2
.LECIE0:
.LSFDE0:
        .4byte  .LEFDE0-.LASFDE0        ; FDE Length
.LASFDE0:
        .4byte  .Lframe0        ; FDE CIE offset
        .4byte  _start          ; FDE initial location
        .4byte  .LFE2 - _start  ; FDE address range
        .byte   0xf             ; DW_CFA_def_cfa_expression
        .uleb128 1              ; length of expression
        .byte   0x30            ; DW_OP_lit0
        .p2align 2
.LEFDE0:

        .text