Context Navigation

← Previous Revision
Latest Revision
Next Revision →
Normal
Revision Log

sparclet-stub.c @ 595

Last change on this file since 595 was 444, checked in by satin@…, 7 years ago
add newlib,libalmos-mkh, restructure shared_syscalls.h and mini-libc
File size: 30.0 KB

Rev	Line
[444]	1	/****************************************************************************
	2
	3	THIS SOFTWARE IS NOT COPYRIGHTED
	4
	5	HP offers the following for use in the public domain. HP makes no
	6	warranty with regard to the software or it's performance and the
	7	user accepts the software "AS IS" with all faults.
	8
	9	HP DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD
	10	TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	11	OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
	12
	13	****************************************************************************/
	14
	15	/****************************************************************************
	16	* Header: remcom.c,v 1.34 91/03/09 12:29:49 glenne Exp $
	17	*
	18	* Module name: remcom.c $
	19	* Revision: 1.34 $
	20	* Date: 91/03/09 12:29:49 $
	21	* Contributor: Lake Stevens Instrument Division$
	22	*
	23	* Description: low level support for gdb debugger. $
	24	*
	25	* Considerations: only works on target hardware $
	26	*
	27	* Written by: Glenn Engel $
	28	* ModuleState: Experimental $
	29	*
	30	* NOTES: See Below $
	31	*
	32	* Modified for SPARC by Stu Grossman, Cygnus Support.
	33	* Based on sparc-stub.c, it's modified for SPARClite Debug Unit hardware
	34	* breakpoint support to create sparclite-stub.c, by Kung Hsu, Cygnus Support.
	35	*
	36	* This code has been extensively tested on the Fujitsu SPARClite demo board.
	37	*
	38	* To enable debugger support, two things need to happen. One, a
	39	* call to set_debug_traps() is necessary in order to allow any breakpoints
	40	* or error conditions to be properly intercepted and reported to gdb.
	41	* Two, a breakpoint needs to be generated to begin communication. This
	42	* is most easily accomplished by a call to breakpoint(). Breakpoint()
	43	* simulates a breakpoint by executing a trap #1.
	44	*
	45	*************
	46	*
	47	* The following gdb commands are supported:
	48	*
	49	* command function Return value
	50	*
	51	* g return the value of the CPU registers hex data or ENN
	52	* G set the value of the CPU registers OK or ENN
	53	* P set the value of a single CPU register OK or P01 (???)
	54	*
	55	* mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN
	56	* MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN
	57	*
	58	* c Resume at current address SNN ( signal NN)
	59	* cAA..AA Continue at address AA..AA SNN
	60	*
	61	* s Step one instruction SNN
	62	* sAA..AA Step one instruction from AA..AA SNN
	63	*
	64	* k kill
	65	*
	66	* ? What was the last sigval ? SNN (signal NN)
	67	*
	68	* bBB..BB Set baud rate to BB..BB OK or BNN, then sets
	69	* baud rate
	70	*
	71	* All commands and responses are sent with a packet which includes a
	72	* checksum. A packet consists of
	73	*
	74	* $<packet info>#<checksum>.
	75	*
	76	* where
	77	* <packet info> :: <characters representing the command or response>
	78	* <checksum> :: <two hex digits computed as modulo 256 sum of <packetinfo>>
	79	*
	80	* When a packet is received, it is first acknowledged with either '+' or '-'.
	81	* '+' indicates a successful transfer. '-' indicates a failed transfer.
	82	*
	83	* Example:
	84	*
	85	* Host: Reply:
	86	* $m0,10#2a +$00010203040506070809101112131415#42
	87	*
	88	****************************************************************************/
	89
	90	#include <string.h>
	91	#include <signal.h>
	92
	93	/************************************************************************
	94	*
	95	* external low-level support routines
	96	*/
	97
	98	extern putDebugChar(); /* write a single character */
	99	extern getDebugChar(); /* read and return a single char */
	100
	101	/************************************************************************/
	102	/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/
	103	/* at least NUMREGBYTES2 are needed for register packets /
	104	#define BUFMAX 2048
	105
	106	static int initialized = 0; /* !0 means we've been initialized */
	107	static int remote_debug = 0; /* turn on verbose debugging */
	108
	109	extern void breakinst();
	110	void _cprint();
	111	static void hw_breakpoint();
	112	static void set_mem_fault_trap();
	113	static void get_in_break_mode();
	114	static unsigned char *mem2hex();
	115
	116	static const char hexchars[]="0123456789abcdef";
	117
	118	#define NUMREGS 121
	119
	120	static unsigned long saved_stack_pointer;
	121
	122	/* Number of bytes of registers. */
	123	#define NUMREGBYTES (NUMREGS * 4)
	124	enum regnames { G0, G1, G2, G3, G4, G5, G6, G7,
	125	O0, O1, O2, O3, O4, O5, SP, O7,
	126	L0, L1, L2, L3, L4, L5, L6, L7,
	127	I0, I1, I2, I3, I4, I5, FP, I7,
	128
	129	F0, F1, F2, F3, F4, F5, F6, F7,
	130	F8, F9, F10, F11, F12, F13, F14, F15,
	131	F16, F17, F18, F19, F20, F21, F22, F23,
	132	F24, F25, F26, F27, F28, F29, F30, F31,
	133
	134	Y, PSR, WIM, TBR, PC, NPC, FPSR, CPSR,
	135	CCSR, CCPR, CCCRCR, CCOR, CCOBR, CCIBR, CCIR, UNUSED1,
	136
	137	ASR1, ASR15, ASR17, ASR18, ASR19, ASR20, ASR21, ASR22,
	138	/* the following not actually implemented */
	139	AWR0, AWR1, AWR2, AWR3, AWR4, AWR5, AWR6, AWR7,
	140	AWR8, AWR9, AWR10, AWR11, AWR12, AWR13, AWR14, AWR15,
	141	AWR16, AWR17, AWR18, AWR19, AWR20, AWR21, AWR22, AWR23,
	142	AWR24, AWR25, AWR26, AWR27, AWR28, AWR29, AWR30, AWR31,
	143	APSR
	144	};
	145
	146	/************************* ASSEMBLY CODE MACROS ***********************/
	147	/* */
	148
	149	extern void trap_low();
	150
	151	asm("
	152	.reserve trapstack, 1000 * 4, \"bss\", 8
	153
	154	.data
	155	.align 4
	156
	157	in_trap_handler:
	158	.word 0
	159
	160	.text
	161	.align 4
	162
	163	! This function is called when any SPARC trap (except window overflow or
	164	! underflow) occurs. It makes sure that the invalid register window is still
	165	! available before jumping into C code. It will also restore the world if you
	166	! return from handle_exception.
	167	!
	168	! On entry, trap_low expects l1 and l2 to contain pc and npc respectivly.
	169
	170	.globl _trap_low
	171	_trap_low:
	172	mov %psr, %l0
	173	mov %wim, %l3
	174
	175	srl %l3, %l0, %l4 ! wim >> cwp
	176	and %l4, 0xff, %l4 ! Mask off windows 28, 29
	177	cmp %l4, 1
	178	bne window_fine ! Branch if not in the invalid window
	179	nop
	180
	181	! Handle window overflow
	182
	183	mov %g1, %l4 ! Save g1, we use it to hold the wim
	184	srl %l3, 1, %g1 ! Rotate wim right
	185	and %g1, 0xff, %g1 ! Mask off windows 28, 29
	186	tst %g1
	187	bg good_wim ! Branch if new wim is non-zero
	188	nop
	189
	190	! At this point, we need to bring a 1 into the high order bit of the wim.
	191	! Since we don't want to make any assumptions about the number of register
	192	! windows, we figure it out dynamically so as to setup the wim correctly.
	193
	194	! The normal way doesn't work on the sparclet as register windows
	195	! 28 and 29 are special purpose windows.
	196	!not %g1 ! Fill g1 with ones
	197	!mov %g1, %wim ! Fill the wim with ones
	198	!nop
	199	!nop
	200	!nop
	201	!mov %wim, %g1 ! Read back the wim
	202	!inc %g1 ! Now g1 has 1 just to left of wim
	203	!srl %g1, 1, %g1 ! Now put 1 at top of wim
	204
	205	mov 0x80, %g1 ! Hack for sparclet
	206
	207	! This doesn't work on the sparclet.
	208	!mov %g0, %wim ! Clear wim so that subsequent save
	209	! won't trap
	210	andn %l3, 0xff, %l5 ! Clear wim but not windows 28, 29
	211	mov %l5, %wim
	212	nop
	213	nop
	214	nop
	215
	216	good_wim:
	217	save %g0, %g0, %g0 ! Slip into next window
	218	mov %g1, %wim ! Install the new wim
	219
	220	std %l0, [%sp + 0 * 4] ! save L & I registers
	221	std %l2, [%sp + 2 * 4]
	222	std %l4, [%sp + 4 * 4]
	223	std %l6, [%sp + 6 * 4]
	224
	225	std %i0, [%sp + 8 * 4]
	226	std %i2, [%sp + 10 * 4]
	227	std %i4, [%sp + 12 * 4]
	228	std %i6, [%sp + 14 * 4]
	229
	230	restore ! Go back to trap window.
	231	mov %l4, %g1 ! Restore %g1
	232
	233	window_fine:
	234	sethi %hi(in_trap_handler), %l4
	235	ld [%lo(in_trap_handler) + %l4], %l5
	236	tst %l5
	237	bg recursive_trap
	238	inc %l5
	239
	240	set trapstack+1000*4, %sp ! Switch to trap stack
	241
	242	recursive_trap:
	243	st %l5, [%lo(in_trap_handler) + %l4]
	244	sub %sp,(16+1+6+1+88)*4,%sp ! Make room for input & locals
	245	! + hidden arg + arg spill
	246	! + doubleword alignment
	247	! + registers[121]
	248
	249	std %g0, [%sp + (24 + 0) * 4] ! registers[Gx]
	250	std %g2, [%sp + (24 + 2) * 4]
	251	std %g4, [%sp + (24 + 4) * 4]
	252	std %g6, [%sp + (24 + 6) * 4]
	253
	254	std %i0, [%sp + (24 + 8) * 4] ! registers[Ox]
	255	std %i2, [%sp + (24 + 10) * 4]
	256	std %i4, [%sp + (24 + 12) * 4]
	257	std %i6, [%sp + (24 + 14) * 4]
	258
	259	! FP regs (sparclet doesn't have fpu)
	260
	261	mov %y, %l4
	262	mov %tbr, %l5
	263	st %l4, [%sp + (24 + 64) * 4] ! Y
	264	st %l0, [%sp + (24 + 65) * 4] ! PSR
	265	st %l3, [%sp + (24 + 66) * 4] ! WIM
	266	st %l5, [%sp + (24 + 67) * 4] ! TBR
	267	st %l1, [%sp + (24 + 68) * 4] ! PC
	268	st %l2, [%sp + (24 + 69) * 4] ! NPC
	269	! CPSR and FPSR not impl
	270	or %l0, 0xf20, %l4
	271	mov %l4, %psr ! Turn on traps, disable interrupts
	272	nop
	273	nop
	274	nop
	275
	276	! Save coprocessor state.
	277	! See SK/demo/hdlc_demo/ldc_swap_context.S.
	278
	279	mov %psr, %l0
	280	sethi %hi(0x2000), %l5 ! EC bit in PSR
	281	or %l5, %l0, %l5
	282	mov %l5, %psr ! enable coprocessor
	283	nop ! 3 nops after write to %psr (needed?)
	284	nop
	285	nop
	286	crdcxt %ccsr, %l1 ! capture CCSR
	287	mov 0x6, %l2
	288	cwrcxt %l2, %ccsr ! set CCP state machine for CCFR
	289	crdcxt %ccfr, %l2 ! capture CCOR
	290	cwrcxt %l2, %ccfr ! tickle CCFR
	291	crdcxt %ccfr, %l3 ! capture CCOBR
	292	cwrcxt %l3, %ccfr ! tickle CCFR
	293	crdcxt %ccfr, %l4 ! capture CCIBR
	294	cwrcxt %l4, %ccfr ! tickle CCFR
	295	crdcxt %ccfr, %l5 ! capture CCIR
	296	cwrcxt %l5, %ccfr ! tickle CCFR
	297	crdcxt %ccpr, %l6 ! capture CCPR
	298	crdcxt %cccrcr, %l7 ! capture CCCRCR
	299	st %l1, [%sp + (24 + 72) * 4] ! save CCSR
	300	st %l2, [%sp + (24 + 75) * 4] ! save CCOR
	301	st %l3, [%sp + (24 + 76) * 4] ! save CCOBR
	302	st %l4, [%sp + (24 + 77) * 4] ! save CCIBR
	303	st %l5, [%sp + (24 + 78) * 4] ! save CCIR
	304	st %l6, [%sp + (24 + 73) * 4] ! save CCPR
	305	st %l7, [%sp + (24 + 74) * 4] ! save CCCRCR
	306	mov %l0, %psr ! restore original PSR
	307	nop ! 3 nops after write to %psr (needed?)
	308	nop
	309	nop
	310
	311	! End of saving coprocessor state.
	312	! Save asr regs
	313
	314	! Part of this is silly -- we should not display ASR15 or ASR19 at all.
	315
	316	sethi %hi(0x01000000), %l6
	317	st %l6, [%sp + (24 + 81) * 4] ! ASR15 == NOP
	318	sethi %hi(0xdeadc0de), %l6
	319	or %l6, %lo(0xdeadc0de), %l6
	320	st %l6, [%sp + (24 + 84) * 4] ! ASR19 == DEADC0DE
	321
	322	rd %asr1, %l4
	323	st %l4, [%sp + (24 + 80) * 4]
	324	! rd %asr15, %l4 ! must not read ASR15
	325	! st %l4, [%sp + (24 + 81) * 4] ! (illegal instr trap)
	326	rd %asr17, %l4
	327	st %l4, [%sp + (24 + 82) * 4]
	328	rd %asr18, %l4
	329	st %l4, [%sp + (24 + 83) * 4]
	330	! rd %asr19, %l4 ! must not read asr19
	331	! st %l4, [%sp + (24 + 84) * 4] ! (halts the CPU)
	332	rd %asr20, %l4
	333	st %l4, [%sp + (24 + 85) * 4]
	334	rd %asr21, %l4
	335	st %l4, [%sp + (24 + 86) * 4]
	336	rd %asr22, %l4
	337	st %l4, [%sp + (24 + 87) * 4]
	338
	339	! End of saving asr regs
	340
	341	call _handle_exception
	342	add %sp, 24 * 4, %o0 ! Pass address of registers
	343
	344	! Reload all of the registers that aren't on the stack
	345
	346	ld [%sp + (24 + 1) * 4], %g1 ! registers[Gx]
	347	ldd [%sp + (24 + 2) * 4], %g2
	348	ldd [%sp + (24 + 4) * 4], %g4
	349	ldd [%sp + (24 + 6) * 4], %g6
	350
	351	ldd [%sp + (24 + 8) * 4], %i0 ! registers[Ox]
	352	ldd [%sp + (24 + 10) * 4], %i2
	353	ldd [%sp + (24 + 12) * 4], %i4
	354	ldd [%sp + (24 + 14) * 4], %i6
	355
	356	! FP regs (sparclet doesn't have fpu)
	357
	358	! Update the coprocessor registers.
	359	! See SK/demo/hdlc_demo/ldc_swap_context.S.
	360
	361	mov %psr, %l0
	362	sethi %hi(0x2000), %l5 ! EC bit in PSR
	363	or %l5, %l0, %l5
	364	mov %l5, %psr ! enable coprocessor
	365	nop ! 3 nops after write to %psr (needed?)
	366	nop
	367	nop
	368
	369	mov 0x6, %l2
	370	cwrcxt %l2, %ccsr ! set CCP state machine for CCFR
	371
	372	ld [%sp + (24 + 72) * 4], %l1 ! saved CCSR
	373	ld [%sp + (24 + 75) * 4], %l2 ! saved CCOR
	374	ld [%sp + (24 + 76) * 4], %l3 ! saved CCOBR
	375	ld [%sp + (24 + 77) * 4], %l4 ! saved CCIBR
	376	ld [%sp + (24 + 78) * 4], %l5 ! saved CCIR
	377	ld [%sp + (24 + 73) * 4], %l6 ! saved CCPR
	378	ld [%sp + (24 + 74) * 4], %l7 ! saved CCCRCR
	379
	380	cwrcxt %l2, %ccfr ! restore CCOR
	381	cwrcxt %l3, %ccfr ! restore CCOBR
	382	cwrcxt %l4, %ccfr ! restore CCIBR
	383	cwrcxt %l5, %ccfr ! restore CCIR
	384	cwrcxt %l6, %ccpr ! restore CCPR
	385	cwrcxt %l7, %cccrcr ! restore CCCRCR
	386	cwrcxt %l1, %ccsr ! restore CCSR
	387
	388	mov %l0, %psr ! restore PSR
	389	nop ! 3 nops after write to %psr (needed?)
	390	nop
	391	nop
	392
	393	! End of coprocessor handling stuff.
	394	! Update asr regs
	395
	396	ld [%sp + (24 + 80) * 4], %l4
	397	wr %l4, %asr1
	398	! ld [%sp + (24 + 81) * 4], %l4 ! can't write asr15
	399	! wr %l4, %asr15
	400	ld [%sp + (24 + 82) * 4], %l4
	401	wr %l4, %asr17
	402	ld [%sp + (24 + 83) * 4], %l4
	403	wr %l4, %asr18
	404	! ld [%sp + (24 + 84) * 4], %l4 ! can't write asr19
	405	! wr %l4, %asr19
	406	! ld [%sp + (24 + 85) * 4], %l4 ! can't write asr20
	407	! wr %l4, %asr20
	408	! ld [%sp + (24 + 86) * 4], %l4 ! can't write asr21
	409	! wr %l4, %asr21
	410	ld [%sp + (24 + 87) * 4], %l4
	411	wr %l4, %asr22
	412
	413	! End of restoring asr regs
	414
	415
	416	ldd [%sp + (24 + 64) * 4], %l0 ! Y & PSR
	417	ldd [%sp + (24 + 68) * 4], %l2 ! PC & NPC
	418
	419	restore ! Ensure that previous window is valid
	420	save %g0, %g0, %g0 ! by causing a window_underflow trap
	421
	422	mov %l0, %y
	423	mov %l1, %psr ! Make sure that traps are disabled
	424	! for rett
	425	nop ! 3 nops after write to %psr (needed?)
	426	nop
	427	nop
	428
	429	sethi %hi(in_trap_handler), %l4
	430	ld [%lo(in_trap_handler) + %l4], %l5
	431	dec %l5
	432	st %l5, [%lo(in_trap_handler) + %l4]
	433
	434	jmpl %l2, %g0 ! Restore old PC
	435	rett %l3 ! Restore old nPC
	436	");
	437
	438	/* Convert ch from a hex digit to an int */
	439
	440	static int
	441	hex(ch)
	442	unsigned char ch;
	443	{
	444	if (ch >= 'a' && ch <= 'f')
	445	return ch-'a'+10;
	446	if (ch >= '0' && ch <= '9')
	447	return ch-'0';
	448	if (ch >= 'A' && ch <= 'F')
	449	return ch-'A'+10;
	450	return -1;
	451	}
	452
	453	/* scan for the sequence $<data>#<checksum> */
	454
	455	static void
	456	getpacket(buffer)
	457	char *buffer;
	458	{
	459	unsigned char checksum;
	460	unsigned char xmitcsum;
	461	int i;
	462	int count;
	463	unsigned char ch;
	464
	465	do
	466	{
	467	/* wait around for the start character, ignore all other characters */
	468	while ((ch = (getDebugChar() & 0x7f)) != '$')
	469	;
	470
	471	checksum = 0;
	472	xmitcsum = -1;
	473
	474	count = 0;
	475
	476	/* now, read until a # or end of buffer is found */
	477	while (count < BUFMAX)
	478	{
	479	ch = getDebugChar() & 0x7f;
	480	if (ch == '#')
	481	break;
	482	checksum = checksum + ch;
	483	buffer[count] = ch;
	484	count = count + 1;
	485	}
	486
	487	if (count >= BUFMAX)
	488	continue;
	489
	490	buffer[count] = 0;
	491
	492	if (ch == '#')
	493	{
	494	xmitcsum = hex(ch = getDebugChar() & 0x7f) << 4;
	495	xmitcsum \|= hex(ch = getDebugChar() & 0x7f);
	496
	497	if (checksum != xmitcsum)
	498	putDebugChar('-'); /* failed checksum */
	499	else
	500	{
	501	putDebugChar('+'); /* successful transfer */
	502	/* if a sequence char is present, reply the sequence ID */
	503	if (buffer[2] == ':')
	504	{
	505	putDebugChar(buffer[0]);
	506	putDebugChar(buffer[1]);
	507	/* remove sequence chars from buffer */
	508	count = strlen(buffer);
	509	for (i=3; i <= count; i++)
	510	buffer[i-3] = buffer[i];
	511	}
	512	}
	513	}
	514	}
	515	while (checksum != xmitcsum);
	516	}
	517
	518	/* send the packet in buffer. */
	519
	520	static void
	521	putpacket(buffer)
	522	unsigned char *buffer;
	523	{
	524	unsigned char checksum;
	525	int count;
	526	unsigned char ch;
	527
	528	/* $<packet info>#<checksum>. */
	529	do
	530	{
	531	putDebugChar('$');
	532	checksum = 0;
	533	count = 0;
	534
	535	while (ch = buffer[count])
	536	{
	537	if (! putDebugChar(ch))
	538	return;
	539	checksum += ch;
	540	count += 1;
	541	}
	542
	543	putDebugChar('#');
	544	putDebugChar(hexchars[checksum >> 4]);
	545	putDebugChar(hexchars[checksum & 0xf]);
	546
	547	}
	548	while ((getDebugChar() & 0x7f) != '+');
	549	}
	550
	551	static char remcomInBuffer[BUFMAX];
	552	static char remcomOutBuffer[BUFMAX];
	553
	554	/* Indicate to caller of mem2hex or hex2mem that there has been an
	555	error. */
	556	static volatile int mem_err = 0;
	557
	558	/* Convert the memory pointed to by mem into hex, placing result in buf.
	559	* Return a pointer to the last char put in buf (null), in case of mem fault,
	560	* return 0.
	561	* If MAY_FAULT is non-zero, then we will handle memory faults by returning
	562	* a 0, else treat a fault like any other fault in the stub.
	563	*/
	564
	565	static unsigned char *
	566	mem2hex(mem, buf, count, may_fault)
	567	unsigned char *mem;
	568	unsigned char *buf;
	569	int count;
	570	int may_fault;
	571	{
	572	unsigned char ch;
	573
	574	set_mem_fault_trap(may_fault);
	575
	576	while (count-- > 0)
	577	{
	578	ch = *mem++;
	579	if (mem_err)
	580	return 0;
	581	*buf++ = hexchars[ch >> 4];
	582	*buf++ = hexchars[ch & 0xf];
	583	}
	584
	585	*buf = 0;
	586
	587	set_mem_fault_trap(0);
	588
	589	return buf;
	590	}
	591
	592	/* convert the hex array pointed to by buf into binary to be placed in mem
	593	* return a pointer to the character AFTER the last byte written */
	594
	595	static char *
	596	hex2mem(buf, mem, count, may_fault)
	597	unsigned char *buf;
	598	unsigned char *mem;
	599	int count;
	600	int may_fault;
	601	{
	602	int i;
	603	unsigned char ch;
	604
	605	set_mem_fault_trap(may_fault);
	606
	607	for (i=0; i<count; i++)
	608	{
	609	ch = hex(*buf++) << 4;
	610	ch \|= hex(*buf++);
	611	*mem++ = ch;
	612	if (mem_err)
	613	return 0;
	614	}
	615
	616	set_mem_fault_trap(0);
	617
	618	return mem;
	619	}
	620
	621	/* This table contains the mapping between SPARC hardware trap types, and
	622	signals, which are primarily what GDB understands. It also indicates
	623	which hardware traps we need to commandeer when initializing the stub. */
	624
	625	static struct hard_trap_info
	626	{
	627	unsigned char tt; /* Trap type code for SPARClite */
	628	unsigned char signo; /* Signal that we map this trap into */
	629	} hard_trap_info[] = {
	630	{1, SIGSEGV}, /* instruction access exception */
	631	{0x3b, SIGSEGV}, /* instruction access error */
	632	{2, SIGILL}, /* illegal instruction */
	633	{3, SIGILL}, /* privileged instruction */
	634	{4, SIGEMT}, /* fp disabled */
	635	{0x24, SIGEMT}, /* cp disabled */
	636	{7, SIGBUS}, /* mem address not aligned */
	637	{0x29, SIGSEGV}, /* data access exception */
	638	{10, SIGEMT}, /* tag overflow */
	639	{128+1, SIGTRAP}, /* ta 1 - normal breakpoint instruction */
	640	{0, 0} /* Must be last */
	641	};
	642
	643	/* Set up exception handlers for tracing and breakpoints */
	644
	645	void
	646	set_debug_traps()
	647	{
	648	struct hard_trap_info *ht;
	649
	650	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
	651	exceptionHandler(ht->tt, trap_low);
	652
	653	/* In case GDB is started before us, ack any packets (presumably
	654	"$?#xx") sitting there. */
	655	putDebugChar ('+');
	656
	657	initialized = 1;
	658	}
	659
	660	asm ("
	661	! Trap handler for memory errors. This just sets mem_err to be non-zero. It
	662	! assumes that %l1 is non-zero. This should be safe, as it is doubtful that
	663	! 0 would ever contain code that could mem fault. This routine will skip
	664	! past the faulting instruction after setting mem_err.
	665
	666	.text
	667	.align 4
	668
	669	_fltr_set_mem_err:
	670	sethi %hi(_mem_err), %l0
	671	st %l1, [%l0 + %lo(_mem_err)]
	672	jmpl %l2, %g0
	673	rett %l2+4
	674	");
	675
	676	static void
	677	set_mem_fault_trap(enable)
	678	int enable;
	679	{
	680	extern void fltr_set_mem_err();
	681	mem_err = 0;
	682
	683	if (enable)
	684	exceptionHandler(0x29, fltr_set_mem_err);
	685	else
	686	exceptionHandler(0x29, trap_low);
	687	}
	688
	689	asm ("
	690	.text
	691	.align 4
	692
	693	_dummy_hw_breakpoint:
	694	jmpl %l2, %g0
	695	rett %l2+4
	696	nop
	697	nop
	698	");
	699
	700	static void
	701	set_hw_breakpoint_trap(enable)
	702	int enable;
	703	{
	704	extern void dummy_hw_breakpoint();
	705
	706	if (enable)
	707	exceptionHandler(255, dummy_hw_breakpoint);
	708	else
	709	exceptionHandler(255, trap_low);
	710	}
	711
	712	static void
	713	get_in_break_mode()
	714	{
	715	#if 0
	716	int x;
	717	mesg("get_in_break_mode, sp = ");
	718	phex(&x);
	719	#endif
	720	set_hw_breakpoint_trap(1);
	721
	722	asm("
	723	sethi %hi(0xff10), %l4
	724	or %l4, %lo(0xff10), %l4
	725	sta %g0, [%l4]0x1
	726	nop
	727	nop
	728	nop
	729	");
	730
	731	set_hw_breakpoint_trap(0);
	732	}
	733
	734	/* Convert the SPARC hardware trap type code to a unix signal number. */
	735
	736	static int
	737	computeSignal(tt)
	738	int tt;
	739	{
	740	struct hard_trap_info *ht;
	741
	742	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
	743	if (ht->tt == tt)
	744	return ht->signo;
	745
	746	return SIGHUP; /* default for things we don't know about */
	747	}
	748
	749	/*
	750	* While we find nice hex chars, build an int.
	751	* Return number of chars processed.
	752	*/
	753
	754	static int
	755	hexToInt(char *ptr, int intValue)
	756	{
	757	int numChars = 0;
	758	int hexValue;
	759
	760	*intValue = 0;
	761
	762	while (**ptr)
	763	{
	764	hexValue = hex(**ptr);
	765	if (hexValue < 0)
	766	break;
	767
	768	intValue = (intValue << 4) \| hexValue;
	769	numChars ++;
	770
	771	(*ptr)++;
	772	}
	773
	774	return (numChars);
	775	}
	776
	777	/*
	778	* This function does all command procesing for interfacing to gdb. It
	779	* returns 1 if you should skip the instruction at the trap address, 0
	780	* otherwise.
	781	*/
	782
	783	static void
	784	handle_exception (registers)
	785	unsigned long *registers;
	786	{
	787	int tt; /* Trap type */
	788	int sigval;
	789	int addr;
	790	int length;
	791	char *ptr;
	792	unsigned long *sp;
	793	unsigned long dsr;
	794
	795	/* First, we must force all of the windows to be spilled out */
	796
	797	asm("
	798	! Ugh. sparclet has broken save
	799	!save %sp, -64, %sp
	800	save
	801	add %fp,-64,%sp
	802	!save %sp, -64, %sp
	803	save
	804	add %fp,-64,%sp
	805	!save %sp, -64, %sp
	806	save
	807	add %fp,-64,%sp
	808	!save %sp, -64, %sp
	809	save
	810	add %fp,-64,%sp
	811	!save %sp, -64, %sp
	812	save
	813	add %fp,-64,%sp
	814	!save %sp, -64, %sp
	815	save
	816	add %fp,-64,%sp
	817	!save %sp, -64, %sp
	818	save
	819	add %fp,-64,%sp
	820	!save %sp, -64, %sp
	821	save
	822	add %fp,-64,%sp
	823	restore
	824	restore
	825	restore
	826	restore
	827	restore
	828	restore
	829	restore
	830	restore
	831	");
	832
	833	if (registers[PC] == (unsigned long)breakinst)
	834	{
	835	registers[PC] = registers[NPC];
	836	registers[NPC] += 4;
	837	}
	838	sp = (unsigned long *)registers[SP];
	839
	840	tt = (registers[TBR] >> 4) & 0xff;
	841
	842	/* reply to host that an exception has occurred */
	843	sigval = computeSignal(tt);
	844	ptr = remcomOutBuffer;
	845
	846	*ptr++ = 'T';
	847	*ptr++ = hexchars[sigval >> 4];
	848	*ptr++ = hexchars[sigval & 0xf];
	849
	850	*ptr++ = hexchars[PC >> 4];
	851	*ptr++ = hexchars[PC & 0xf];
	852	*ptr++ = ':';
	853	ptr = mem2hex((char *)&registers[PC], ptr, 4, 0);
	854	*ptr++ = ';';
	855
	856	*ptr++ = hexchars[FP >> 4];
	857	*ptr++ = hexchars[FP & 0xf];
	858	*ptr++ = ':';
	859	ptr = mem2hex(sp + 8 + 6, ptr, 4, 0); /* FP */
	860	*ptr++ = ';';
	861
	862	*ptr++ = hexchars[SP >> 4];
	863	*ptr++ = hexchars[SP & 0xf];
	864	*ptr++ = ':';
	865	ptr = mem2hex((char *)&sp, ptr, 4, 0);
	866	*ptr++ = ';';
	867
	868	*ptr++ = hexchars[NPC >> 4];
	869	*ptr++ = hexchars[NPC & 0xf];
	870	*ptr++ = ':';
	871	ptr = mem2hex((char *)&registers[NPC], ptr, 4, 0);
	872	*ptr++ = ';';
	873
	874	*ptr++ = hexchars[O7 >> 4];
	875	*ptr++ = hexchars[O7 & 0xf];
	876	*ptr++ = ':';
	877	ptr = mem2hex((char *)&registers[O7], ptr, 4, 0);
	878	*ptr++ = ';';
	879
	880	*ptr++ = 0;
	881
	882	putpacket(remcomOutBuffer);
	883
	884	while (1)
	885	{
	886	remcomOutBuffer[0] = 0;
	887
	888	getpacket(remcomInBuffer);
	889	switch (remcomInBuffer[0])
	890	{
	891	case '?':
	892	remcomOutBuffer[0] = 'S';
	893	remcomOutBuffer[1] = hexchars[sigval >> 4];
	894	remcomOutBuffer[2] = hexchars[sigval & 0xf];
	895	remcomOutBuffer[3] = 0;
	896	break;
	897
	898	case 'd':
	899	remote_debug = !(remote_debug); /* toggle debug flag */
	900	break;
	901
	902	case 'g': /* return the value of the CPU registers */
	903	{
	904	ptr = remcomOutBuffer;
	905	ptr = mem2hex((char )registers, ptr, 16 4, 0); /* G & O regs */
	906	ptr = mem2hex(sp + 0, ptr, 16 * 4, 0); /* L & I regs */
	907	memset(ptr, '0', 32 * 8); /* Floating point */
	908	ptr = mem2hex((char *)&registers[Y],
	909	ptr + 32 * 4 * 2,
	910	8 * 4,
	911	0); /* Y, PSR, WIM, TBR, PC, NPC, FPSR, CPSR */
	912	ptr = mem2hex((char *)&registers[CCSR],
	913	ptr,
	914	8 * 4,
	915	0); /* CCSR, CCPR, CCCRCR, CCOR, CCOBR, CCIBR, CCIR */
	916	ptr = mem2hex((char *)&registers[ASR1],
	917	ptr,
	918	8 * 4,
	919	0); /* ASR1,ASR15,ASR17,ASR18,ASR19,ASR20,ASR21,ASR22 */
	920	#if 0 /* not implemented */
	921	ptr = mem2hex((char *) &registers[AWR0],
	922	ptr,
	923	32 * 4,
	924	0); /* Alternate Window Registers */
	925	#endif
	926	}
	927	break;
	928
	929	case 'G': /* set value of all the CPU registers - return OK */
	930	case 'P': /* set value of one CPU register - return OK */
	931	{
	932	unsigned long *newsp, psr;
	933
	934	psr = registers[PSR];
	935
	936	ptr = &remcomInBuffer[1];
	937
	938	if (remcomInBuffer[0] == 'P') /* do a single register */
	939	{
	940	int regno;
	941
	942	if (hexToInt (&ptr, &regno)
	943	&& *ptr++ == '=')
	944	if (regno >= L0 && regno <= I7)
	945	hex2mem (ptr, sp + regno - L0, 4, 0);
	946	else
	947	hex2mem (ptr, (char *)&registers[regno], 4, 0);
	948	else
	949	{
	950	strcpy (remcomOutBuffer, "P01");
	951	break;
	952	}
	953	}
	954	else
	955	{
	956	hex2mem(ptr, (char )registers, 16 4, 0); /* G & O regs */
	957	hex2mem(ptr + 16 * 4 * 2, sp + 0, 16 * 4, 0); /* L & I regs */
	958	hex2mem(ptr + 64 * 4 * 2, (char *)&registers[Y],
	959	8 * 4, 0); /* Y,PSR,WIM,TBR,PC,NPC,FPSR,CPSR */
	960	hex2mem(ptr + 72 * 4 * 2, (char *)&registers[CCSR],
	961	8 * 4, 0); /* CCSR,CCPR,CCCRCR,CCOR,CCOBR,CCIBR,CCIR */
	962	hex2mem(ptr + 80 * 4 * 2, (char *)&registers[ASR1],
	963	8 * 4, 0); /* ASR1 ... ASR22 */
	964	#if 0 /* not implemented */
	965	hex2mem(ptr + 88 * 4 * 2, (char *)&registers[AWR0],
	966	8 * 4, 0); /* Alternate Window Registers */
	967	#endif
	968	}
	969	/* See if the stack pointer has moved. If so, then copy the saved
	970	locals and ins to the new location. This keeps the window
	971	overflow and underflow routines happy. */
	972
	973	newsp = (unsigned long *)registers[SP];
	974	if (sp != newsp)
	975	sp = memcpy(newsp, sp, 16 * 4);
	976
	977	/* Don't allow CWP to be modified. */
	978
	979	if (psr != registers[PSR])
	980	registers[PSR] = (psr & 0x1f) \| (registers[PSR] & ~0x1f);
	981
	982	strcpy(remcomOutBuffer,"OK");
	983	}
	984	break;
	985
	986	case 'm': /* mAA..AA,LLLL Read LLLL bytes at address AA..AA */
	987	/* Try to read %x,%x. */
	988
	989	ptr = &remcomInBuffer[1];
	990
	991	if (hexToInt(&ptr, &addr)
	992	&& *ptr++ == ','
	993	&& hexToInt(&ptr, &length))
	994	{
	995	if (mem2hex((char *)addr, remcomOutBuffer, length, 1))
	996	break;
	997
	998	strcpy (remcomOutBuffer, "E03");
	999	}
	1000	else
	1001	strcpy(remcomOutBuffer,"E01");
	1002	break;
	1003
	1004	case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
	1005	/* Try to read '%x,%x:'. */
	1006
	1007	ptr = &remcomInBuffer[1];
	1008
	1009	if (hexToInt(&ptr, &addr)
	1010	&& *ptr++ == ','
	1011	&& hexToInt(&ptr, &length)
	1012	&& *ptr++ == ':')
	1013	{
	1014	if (hex2mem(ptr, (char *)addr, length, 1))
	1015	strcpy(remcomOutBuffer, "OK");
	1016	else
	1017	strcpy(remcomOutBuffer, "E03");
	1018	}
	1019	else
	1020	strcpy(remcomOutBuffer, "E02");
	1021	break;
	1022
	1023	case 'c': /* cAA..AA Continue at address AA..AA(optional) */
	1024	/* try to read optional parameter, pc unchanged if no parm */
	1025
	1026	ptr = &remcomInBuffer[1];
	1027	if (hexToInt(&ptr, &addr))
	1028	{
	1029	registers[PC] = addr;
	1030	registers[NPC] = addr + 4;
	1031	}
	1032
	1033	/* Need to flush the instruction cache here, as we may have deposited a
	1034	breakpoint, and the icache probably has no way of knowing that a data ref to
	1035	some location may have changed something that is in the instruction cache.
	1036	*/
	1037
	1038	flush_i_cache();
	1039	return;
	1040
	1041	/* kill the program */
	1042	case 'k' : /* do nothing */
	1043	break;
	1044	#if 0
	1045	case 't': /* Test feature */
	1046	asm (" std %f30,[%sp]");
	1047	break;
	1048	#endif
	1049	case 'r': /* Reset */
	1050	asm ("call 0
	1051	nop ");
	1052	break;
	1053
	1054	#if 0
	1055	Disabled until we can unscrew this properly
	1056
	1057	case 'b': /* bBB... Set baud rate to BB... */
	1058	{
	1059	int baudrate;
	1060	extern void set_timer_3();
	1061
	1062	ptr = &remcomInBuffer[1];
	1063	if (!hexToInt(&ptr, &baudrate))
	1064	{
	1065	strcpy(remcomOutBuffer,"B01");
	1066	break;
	1067	}
	1068
	1069	/* Convert baud rate to uart clock divider */
	1070	switch (baudrate)
	1071	{
	1072	case 38400:
	1073	baudrate = 16;
	1074	break;
	1075	case 19200:
	1076	baudrate = 33;
	1077	break;
	1078	case 9600:
	1079	baudrate = 65;
	1080	break;
	1081	default:
	1082	strcpy(remcomOutBuffer,"B02");
	1083	goto x1;
	1084	}
	1085
	1086	putpacket("OK"); /* Ack before changing speed */
	1087	set_timer_3(baudrate); /* Set it */
	1088	}
	1089	x1: break;
	1090	#endif
	1091	} /* switch */
	1092
	1093	/* reply to the request */
	1094	putpacket(remcomOutBuffer);
	1095	}
	1096	}
	1097
	1098	/* This function will generate a breakpoint exception. It is used at the
	1099	beginning of a program to sync up with a debugger and can be used
	1100	otherwise as a quick means to stop program execution and "break" into
	1101	the debugger. */
	1102
	1103	void
	1104	breakpoint()
	1105	{
	1106	if (!initialized)
	1107	return;
	1108
	1109	asm(" .globl _breakinst
	1110
	1111	_breakinst: ta 1
	1112	");
	1113	}
	1114
	1115	static void
	1116	hw_breakpoint()
	1117	{
	1118	asm("
	1119	ta 127
	1120	");
	1121	}
	1122
	1123	#if 0 /* experimental and never finished, left here for reference */
	1124	static void
	1125	splet_temp(void)
	1126	{
	1127	asm(" sub %sp,(16+1+6+1+121)*4,%sp ! Make room for input & locals
	1128	! + hidden arg + arg spill
	1129	! + doubleword alignment
	1130	! + registers[121]
	1131
	1132	! Leave a trail of breadcrumbs! (save register save area for debugging)
	1133	mov %sp, %l0
	1134	add %l0, 24*4, %l0
	1135	sethi %hi(_debug_registers), %l1
	1136	st %l0, [%lo(_debug_registers) + %l1]
	1137
	1138	! Save the Alternate Register Set: (not implemented yet)
	1139	! To save the Alternate Register set, we must:
	1140	! 1) Save the current SP in some global location.
	1141	! 2) Swap the register sets.
	1142	! 3) Save the Alternate SP in the Y register
	1143	! 4) Fetch the SP that we saved in step 1.
	1144	! 5) Use that to save the rest of the regs (not forgetting ASP in Y)
	1145	! 6) Restore the Alternate SP from Y
	1146	! 7) Swap the registers back.
	1147
	1148	! 1) Copy the current stack pointer to global _SAVED_STACK_POINTER:
	1149	sethi %hi(_saved_stack_pointer), %l0
	1150	st %sp, [%lo(_saved_stack_pointer) + %l0]
	1151
	1152	! 2) Swap the register sets:
	1153	mov %psr, %l1
	1154	sethi %hi(0x10000), %l2
	1155	xor %l1, %l2, %l1
	1156	mov %l1, %psr
	1157	nop ! 3 nops after write to %psr (needed?)
	1158	nop
	1159	nop
	1160
	1161	! 3) Save Alternate L0 in Y
	1162	wr %l0, 0, %y
	1163
	1164	! 4) Load former SP into alternate SP, using L0
	1165	sethi %hi(_saved_stack_pointer), %l0
	1166	or %lo(_saved_stack_pointer), %l0, %l0
	1167	swap [%l0], %sp
	1168
	1169	! 4.5) Restore alternate L0
	1170	rd %y, %l0
	1171
	1172	! 5) Save the Alternate Window Registers
	1173	st %r0, [%sp + (24 + 88) * 4] ! AWR0
	1174	st %r1, [%sp + (24 + 89) * 4] ! AWR1
	1175	st %r2, [%sp + (24 + 90) * 4] ! AWR2
	1176	st %r3, [%sp + (24 + 91) * 4] ! AWR3
	1177	st %r4, [%sp + (24 + 92) * 4] ! AWR4
	1178	st %r5, [%sp + (24 + 93) * 4] ! AWR5
	1179	st %r6, [%sp + (24 + 94) * 4] ! AWR6
	1180	st %r7, [%sp + (24 + 95) * 4] ! AWR7
	1181	st %r8, [%sp + (24 + 96) * 4] ! AWR8
	1182	st %r9, [%sp + (24 + 97) * 4] ! AWR9
	1183	st %r10, [%sp + (24 + 98) * 4] ! AWR10
	1184	st %r11, [%sp + (24 + 99) * 4] ! AWR11
	1185	st %r12, [%sp + (24 + 100) * 4] ! AWR12
	1186	st %r13, [%sp + (24 + 101) * 4] ! AWR13
	1187	! st %r14, [%sp + (24 + 102) * 4] ! AWR14 (SP)
	1188	st %r15, [%sp + (24 + 103) * 4] ! AWR15
	1189	st %r16, [%sp + (24 + 104) * 4] ! AWR16
	1190	st %r17, [%sp + (24 + 105) * 4] ! AWR17
	1191	st %r18, [%sp + (24 + 106) * 4] ! AWR18
	1192	st %r19, [%sp + (24 + 107) * 4] ! AWR19
	1193	st %r20, [%sp + (24 + 108) * 4] ! AWR20
	1194	st %r21, [%sp + (24 + 109) * 4] ! AWR21
	1195	st %r22, [%sp + (24 + 110) * 4] ! AWR22
	1196	st %r23, [%sp + (24 + 111) * 4] ! AWR23
	1197	st %r24, [%sp + (24 + 112) * 4] ! AWR24
	1198	st %r25, [%sp + (24 + 113) * 4] ! AWR25
	1199	st %r26, [%sp + (24 + 114) * 4] ! AWR26
	1200	st %r27, [%sp + (24 + 115) * 4] ! AWR27
	1201	st %r28, [%sp + (24 + 116) * 4] ! AWR28
	1202	st %r29, [%sp + (24 + 117) * 4] ! AWR29
	1203	st %r30, [%sp + (24 + 118) * 4] ! AWR30
	1204	st %r31, [%sp + (24 + 119) * 4] ! AWR21
	1205
	1206	! Get the Alternate PSR (I hope...)
	1207
	1208	rd %psr, %l2
	1209	st %l2, [%sp + (24 + 120) * 4] ! APSR
	1210
	1211	! Don't forget the alternate stack pointer
	1212
	1213	rd %y, %l3
	1214	st %l3, [%sp + (24 + 102) * 4] ! AWR14 (SP)
	1215
	1216	! 6) Restore the Alternate SP (saved in Y)
	1217
	1218	rd %y, %o6
	1219
	1220
	1221	! 7) Swap the registers back:
	1222
	1223	mov %psr, %l1
	1224	sethi %hi(0x10000), %l2
	1225	xor %l1, %l2, %l1
	1226	mov %l1, %psr
	1227	nop ! 3 nops after write to %psr (needed?)
	1228	nop
	1229	nop
	1230	");
	1231	}
	1232
	1233	#endif

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: trunk/libs/newlib/src/libgloss/sparc/sparclet-stub.c @ 595

Download in other formats: