source: trunk/libs/newlib/src/libgloss/sparc_leon/Makefile.in @ 606

# Makefile for libgloss/sparc_leon. This is the board support
# code for the various sparc leon targets.

DESTDIR =
VPATH = @srcdir@
srcdir = @srcdir@
objdir = .
srcroot = $(srcdir)/../..
objroot = $(objdir)/../..

prefix = @prefix@
exec_prefix = @exec_prefix@

host_alias = @host_alias@
target_alias = @target_alias@

bindir = @bindir@
libdir = @libdir@
tooldir = $(exec_prefix)/$(target_alias)
mkinstalldirs = $(SHELL) $(srcroot)/mkinstalldirs

# Multilib support variables.
# TOP is used instead of MULTI{BUILD,SRC}TOP.
MULTIDIRS =
MULTISUBDIR =
MULTIDO = true
MULTICLEAN = true

INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@

SHELL = /bin/sh

CC = @CC@

AS = @AS@
AR = @AR@
LD = @LD@
RANLIB = @RANLIB@
AR_FLAGS = qrv

OBJDUMP = `if [ -f ${objroot}/../binutils/objdump ] ; \
        then echo ${objroot}/../binutils/objdump ; \
        else t='$(program_transform_name)'; echo objdump | sed -e $$t ; fi`
OBJCOPY = `if [ -f ${objroot}/../binutils/objcopy ] ; \
        then echo ${objroot}/../binutils/objcopy ; \
        else t='$(program_transform_name)'; echo objcopy | sed -e $$t ; fi`

LEON_BSP  = libleonbare.a
LEON_OBJS = etrap.o rtrap.o etrap_fast.o rtrap_fast.o irqinstall.o regwin.o \
            regwinflush.o fpu.o bdinit.o contextswitch.o \
            busscan.o irqtrap_fast.o catch_interrupt.o catch_interrupt_svt.o \
            catch_interrupt_mvt.o catch_interrupt_pending.o gettimeofday.o \
            times.o rtc.o lcpuinit.o console_init.o console.o console_dbg.o \
            contextswitch.o contextswitch_asm.o _exit.o amba.o amba_dbg.o \
            amba_scan.o amba_driver.o timer.o mutex.o locore.o locore_clean.o \
            locore_var.o locore_var_svt.o jiffies.o \
            mmu_asm.o locore_svtdisp.o locore_mvt_reset.o locore_svt_reset.o stop.o initcalls.o \
            regwin_patch.o cacheA.o nocache.o  

LEONBARE_THREADS = liblbthread.a
LEONBARE_THREADS_OBJS = kernel.o kernel_debug.o kernel_debug_var.o kernel_context.o \
                        kernel_mutex.o kernel_thread.o kernel_sched.o kernel_queue.o \
                        kernel_mm.o

LOCOREATEXIT = locore_atexit.o
LEON_SMALLC = libsmall.a

PNP=pnpinit.o
PNP_S=pnpinit_simple.o
LEON_ALL = $(LEON_BSP) $(LEON_SMALLC) $(LEONBARE_THREADS) $(PNP) $(PNP_S) crti.o crtn.o 

LOCORESVT = locore_svt.o 
LOCOREMVT = locore_mvt.o
CRT0 = crt0.o
OBJS = close.o fstat.o getpid.o isatty.o kill.o \
        lseek.o open.o print.o putnum.o read.o sbrk.o stat.o \
        unlink.o write.o io.o kernel.o kernel_debug.o kernel_debug_var.o kernel_context.o
#link.o 

#### Host specific Makefile fragment comes in here.
@host_makefile_frag@

all: stmp-targ-include $(CRT0) $(LOCOREMVT) $(LOCORESVT) $(LEON_ALL)

$(CRT0): $(srcdir)/crt0.S 
        $(CC) $(CFLAGS_FOR_TARGET) $(CFLAGS) $(INCLUDES) -o $@ -c $(srcdir)/crt0.S

$(LEON_BSP): $(OBJS) $(LEON_OBJS)
        @rm -f $@
        ${AR} ${AR_FLAGS} $@ $(OBJS) $(LEON_OBJS) 
        ${RANLIB} $@

$(LEON_SMALLC): $(LOCOREATEXIT)
        @rm -f $@
        ${AR} ${AR_FLAGS} $@ $(LOCOREATEXIT)
        ${RANLIB} $@

$(LEONBARE_THREADS): $(LEONBARE_THREADS_OBJS)
        @rm -f $@
        ${AR} ${AR_FLAGS} $@ $(LEONBARE_THREADS_OBJS)
        ${RANLIB} $@

install: 
        $(INSTALL_DATA) $(CRT0)     $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}/$(CRT0)
        $(INSTALL_DATA) $(LOCORESVT)  $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}/$(LOCORESVT)
        $(INSTALL_DATA) $(LOCOREMVT)  $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}/$(LOCOREMVT)
        $(INSTALL_DATA) $(PNP)  $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}/$(PNP)
        $(INSTALL_DATA) $(PNP_S)  $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}/$(PNP_S)
        $(INSTALL_DATA) $(LEON_BSP) $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}/$(LEON_BSP)
        $(INSTALL_DATA) $(LEON_SMALLC) $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}/$(LEON_SMALLC)
        $(INSTALL_DATA) $(LEONBARE_THREADS) $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}/$(LEONBARE_THREADS)
        if [ -z "$(MULTISUBDIR)" ]; then \
         $(mkinstalldirs) $(DESTDIR)$(tooldir)/include/asm-leon; \
         for i in $(srcdir)/asm-leon/*.h; do \
          if [ -f $$i ]; then \
           $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/asm-leon/`basename $$i` || exit $$?; \
          else true; fi ; \
         done; \
        else true; fi

stmp-targ-include: $(srcdir)/asm-leon/*
        if [ -d ${objroot}/newlib/targ-include/asm-leon ]; then \
                rm -rf ${objroot}/newlib/targ-include/asm-leon; \
        else true; fi ; \
        if [ -d ${objroot}/newlib/targ-include ]; then \
                cp -r $(srcdir)/asm-leon ${objroot}/newlib/targ-include/asm-leon; \
        else true; fi ; \
        touch $@

all-recursive: stmp-targ-include

# Make a simple test case to test the linker script, startup code, and
# I/O code
#
test: 
        @echo Done...

# target specific makefile fragment comes in here.
# @target_makefile_frag@

clean mostlyclean:
        rm -f *.o *.a *.map *.x

distclean maintainer-clean realclean: clean
        rm -f Makefile config.cache config.log config.status

.PHONY: info dvi doc install-info clean-info
info doc dvi:
install-info:
clean-info:

# target specific makefile fragment comes in here.
@target_makefile_frag@

Makefile: Makefile.in config.status @host_makefile_frag_path@ @target_makefile_frag_path@
        $(SHELL) config.status

config.status: configure
        $(SHELL) config.status --recheck