Context Navigation

source: trunk/tools/bootloader_tsar/boot.c @ 313

Last change on this file since 313 was 296, checked in by alain, 7 years ago
Several modifs in the generic scheduler and in the hal_context to fix the context switch mechanism.
File size: 38.9 KB

Rev	Line
[6]	1	/*
	2	* boot.c - TSAR bootloader implementation.
	3	*
	4	* Authors : Alain Greiner / Vu Son (2016)
	5	*
	6	* Copyright (c) UPMC Sorbonne Universites
	7	*
	8	* This file is part of ALMOS-MKH.
	9	*
	10	* ALMOS-MKH is free software; you can redistribute it and/or modify it
	11	* under the terms of the GNU General Public License as published by
	12	* the Free Software Foundation; version 2.0 of the License.
	13	*
	14	* ALMOS-MKH is distributed in the hope that it will be useful, but
	15	* WITHOUT ANY WARRANTY; without even the implied warranty of
	16	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
	17	* General Public License for more details.
	18	*
	19	* You should have received a copy of the GNU General Public License
	20	* along with ALMOS-MKH; if not, write to the Free Software Foundation,
	21	* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
	22	*/
	23
[1]	24	/****************************************************************************
[6]	25	* This file contains the ALMOS-MKH. boot-loader for the TSAR architecture. *
[1]	26	* *
	27	* It supports clusterised shared memory multi-processor architectures, *
[50]	28	* where each processor core is identified by a composite index [cxy,lid] *
[1]	29	* with one physical memory bank per cluster. *
	30	* *
	31	* The 'boot.elf' file (containing the boot-loader binary code) is stored *
[50]	32	* on disk and is loaded into memory by core[0,0] (cxy = 0 / lid = 0), *
	33	* and is copied in each other cluter by the local CP0 (lid = 0]. *
[1]	34	* *
[50]	35	* 1) The boot-loader first phase is executed by core[0,0], while *
[1]	36	* all other cores are waiting in the preloader. *
	37	* It does the following tasks: *
[50]	38	* - load into the memory bank of cluster 0 the 'arch_info.bin' *
[1]	39	* file (containing the hardware architecture description) and the *
	40	* 'kernel.elf' file, at temporary locations, *
	41	* - initializes the 'boot_info_t' structure in cluster(0,0) *
	42	* (there is 1 'boot_info_t' per cluster), which contains both *
	43	* global and cluster specific information that will be used for *
	44	* kernel initialisation. *
	45	* - activate CP0s in all other clusters, using IPIs. *
	46	* - wait completion reports from CP0s on a global barrier. *
	47	* *
	48	* 2) The boot-loader second phase is then executed in parallel by all *
[50]	49	* CP0s (other than core[0,0]). Each CP0 performs the following tasks: *
[1]	50	* - copies into the memory bank of the local cluster the 'boot.elf', *
	51	* the 'arch_info.bin' (at the same addresses as the 'boot.elf' and *
	52	* the 'arch_info.bin' in the memory bank of the cluster(0,0), and *
	53	* the kernel image (at address 0x0), *
	54	* - initializes the 'boot_info_t' structure of the local cluster, *
	55	* - activate all other cores in the same cluster (CPi). *
	56	* - wait local CPi completion reports on a local barrier. *
	57	* - report completion to bscpu on the global barrier. *
	58	* *
	59	* 3) The boot-loader third phase is executed in parallel by all cores. *
	60	* After passing the global barrier the bscpu: *
[50]	61	* - activates the CPi of cluster(0), *
[1]	62	* - blocks on the local barrier waiting for all local CPi to report *
	63	* completion on the local barrier, *
	64	* - moves the local kernel image from the temporary location to the *
	65	* address 0x0, (erasing the preloader code). *
	66	* *
	67	* 4) All cores have finished the boot phase, they jump to the kern_init() *
	68	* function (maybe not at the same time). *
	69	****************************************************************************/
	70
	71	#include <elf-types.h>
[6]	72	#include <hal_types.h>
[1]	73
[13]	74	#include <kernel_config.h>
[1]	75	#include <boot_config.h>
	76
	77	#include <arch_info.h>
	78	#include <boot_info.h>
	79
	80	#include <boot_utils.h>
	81	#include <boot_fat32.h>
	82	#include <boot_bdv_driver.h>
	83	#include <boot_hba_driver.h>
	84	#include <boot_tty_driver.h>
	85
[6]	86	/*****************************************************************************
	87	* Macros.
[1]	88	****************************************************************************/
	89
	90	#define PAGE_ROUND_DOWN(x) ((x) & (~PPM_PAGE_SIZE -1))
	91	#define PAGE_ROUND_UP(x) (((x) + PPM_PAGE_SIZE-1) & \
	92	(~(PPM_PAGE_SIZE-1)))
	93
[6]	94	/*****************************************************************************
	95	* Global variables.
[1]	96	****************************************************************************/
	97
	98	// synchronization variables.
	99
[6]	100	volatile boot_remote_spinlock_t tty0_lock; // protect TTY0 access
	101	volatile boot_remote_barrier_t global_barrier; // synchronize CP0 cores
	102	volatile boot_remote_barrier_t local_barrier; // synchronize cores in one cluster
	103	uint32_t active_cp0s_nr; // number of expected CP0s
	104
	105	// kernel segments layout variables
[1]	106
[296]	107	uint32_t seg_kcode_base; // kcode segment base address
	108	uint32_t seg_kcode_size; // kcode segment size (bytes)
	109	uint32_t seg_kdata_base; // kdata segment base address
	110	uint32_t seg_kdata_size; // kdata segment size (bytes)
	111	uint32_t seg_kentry_base; // kcode segment base address
	112	uint32_t seg_kentry_size; // kcode segment size (bytes)
[279]	113
[6]	114	uint32_t kernel_entry; // kernel entry point
[1]	115
[6]	116	// address used by the WTI to activate remote CP0s
[1]	117
[6]	118	extern void boot_entry(); // boot_loader entry point
[1]	119
[6]	120	/*********************************************************************************
	121	* This function returns the printable string for each device type
	122	********************************************************************************/
[1]	123	char * device_type_str( uint32_t dev_type )
	124	{
[6]	125	if ( dev_type == DEV_TYPE_RAM_SCL ) return "RAM_SCL";
	126	else if( dev_type == DEV_TYPE_ROM_SCL ) return "ROM_SCL";
	127	else if( dev_type == DEV_TYPE_FBF_SCL ) return "FBF_SCL";
	128	else if( dev_type == DEV_TYPE_IOB_TSR ) return "IOB_TSR";
[1]	129	else if( dev_type == DEV_TYPE_IOC_BDV ) return "IOC_BDV";
	130	else if( dev_type == DEV_TYPE_IOC_HBA ) return "IOC_HBA";
	131	else if( dev_type == DEV_TYPE_IOC_SDC ) return "IOC_SDC";
	132	else if( dev_type == DEV_TYPE_IOC_SPI ) return "IOC_SPI";
	133	else if( dev_type == DEV_TYPE_IOC_RDK ) return "IOC_RDK";
[6]	134	else if( dev_type == DEV_TYPE_MMC_TSR ) return "MMC_TSR";
	135	else if( dev_type == DEV_TYPE_DMA_SCL ) return "DMA_SCL";
	136	else if( dev_type == DEV_TYPE_NIC_CBF ) return "NIC_CBF";
	137	else if( dev_type == DEV_TYPE_TIM_SCL ) return "TIM_SCL";
	138	else if( dev_type == DEV_TYPE_TXT_TTY ) return "TXT_TTY";
	139	else if( dev_type == DEV_TYPE_ICU_XCU ) return "ICU_XCU";
	140	else if( dev_type == DEV_TYPE_PIC_TSR ) return "PIC_TSR";
	141	else return "undefined";
[1]	142	}
	143
[6]	144	/************************************************************************************
[1]	145	* This function loads the arch_info.bin file into the boot cluster memory.
[6]	146	***********************************************************************************/
[1]	147	static void boot_archinfo_load()
	148	{
	149	archinfo_header_t* header = (archinfo_header_t*)ARCHINFO_BASE;
	150
	151	// Load file into memory
	152	if (boot_fat32_load(ARCHINFO_PATHNAME, ARCHINFO_BASE, ARCHINFO_MAX_SIZE))
	153	{
	154	boot_printf("\n[BOOT ERROR]: boot_archinfo_load(): "
	155	"<%s> file not found\n",
	156	ARCHINFO_PATHNAME);
	157	boot_exit();
	158	}
	159
	160	if (header->signature != ARCHINFO_SIGNATURE)
	161	{
	162	boot_printf("\n[BOOT_ERROR]: boot_archinfo_load(): "
	163	"<%s> file signature should be %x\n",
	164	ARCHINFO_PATHNAME, ARCHINFO_SIGNATURE);
	165	boot_exit();
	166	}
	167
	168	#if DEBUG_BOOT_INFO
[6]	169	boot_printf("\n[BOOT INFO] in %s : file %s loaded at address = %x\n",
	170	__FUNCTION__ , ARCHINFO_PATHNAME , ARCHINFO_BASE );
[1]	171	#endif
	172
	173	} // boot_archinfo_load()
	174
[6]	175	/**************************************************************************************
	176	* This function loads the 'kernel.elf' file into the boot cluster memory buffer,
[296]	177	* analyzes it, and places the three kcode, kentry, kdata segments at their final
[279]	178	* physical adresses (defined the .elf file).
[6]	179	* It set the global variables defining the kernel layout.
	180	*************************************************************************************/
[1]	181	static void boot_kernel_load()
	182	{
[6]	183	Elf32_Ehdr * elf_header; // pointer on kernel.elf header.
	184	Elf32_Phdr * program_header; // pointer on kernel.elf program header.
	185	uint32_t phdr_offset; // program header offset in kernel.elf file.
	186	uint32_t segments_nb; // number of segments in kernel.elf file.
	187	uint32_t seg_src_addr; // segment address in kernel.elf file (source).
	188	uint32_t seg_paddr; // segment local physical address of segment
	189	uint32_t seg_offset; // segment offset in kernel.elf file
	190	uint32_t seg_filesz; // segment size (bytes) in kernel.elf file
	191	uint32_t seg_memsz; // segment size (bytes) in memory image.
	192	bool_t kcode_found; // kcode segment found.
	193	bool_t kdata_found; // kdata segment found.
[296]	194	bool_t kentry_found; // kentry segment found.
[6]	195	uint32_t seg_id; // iterator for segments loop.
[1]	196
[6]	197	#if DEBUG_BOOT_ELF
	198	boot_printf("\n[BOOT INFO] %s enters for file %s at cycle %d\n",
	199	__FUNCTION__ , KERNEL_PATHNAME , boot_get_proctime() );
	200	#endif
[1]	201
[6]	202	// Load kernel.elf file into memory buffer
	203	if ( boot_fat32_load(KERNEL_PATHNAME, KERN_BASE, KERN_MAX_SIZE) )
[1]	204	{
[6]	205	boot_printf("\n[BOOT ERROR] in %s : <%s> file not found\n",
[1]	206	KERNEL_PATHNAME);
	207	boot_exit();
	208	}
	209
[6]	210	// get pointer to kernel.elf header
[1]	211	elf_header = (Elf32_Ehdr*)KERN_BASE;
	212
[6]	213	// check signature
[1]	214	if ((elf_header->e_ident[EI_MAG0] != ELFMAG0) \|\|
	215	(elf_header->e_ident[EI_MAG1] != ELFMAG1) \|\|
	216	(elf_header->e_ident[EI_MAG2] != ELFMAG2) \|\|
	217	(elf_header->e_ident[EI_MAG3] != ELFMAG3))
	218	{
	219	boot_printf("\n[BOOT_ERROR]: boot_kernel_load(): "
	220	"<%s> is not an ELF file\n",
	221	KERNEL_PATHNAME);
	222	boot_exit();
	223	}
	224
[6]	225	// Get program header table offset and number of segments
[1]	226	phdr_offset = elf_header->e_phoff;
	227	segments_nb = elf_header->e_phnum;
	228
[6]	229	// Get program header table pointer
[1]	230	program_header = (Elf32_Phdr*)(KERN_BASE + phdr_offset);
	231
[6]	232	// loop on segments
[296]	233	kcode_found = false;
	234	kdata_found = false;
	235	kentry_found = false;
[1]	236	for (seg_id = 0; seg_id < segments_nb; seg_id++)
	237	{
[6]	238	if (program_header[seg_id].p_type == PT_LOAD) // Found one loadable segment
[1]	239	{
[6]	240	// Get segment attributes.
[1]	241	seg_paddr = program_header[seg_id].p_paddr;
	242	seg_offset = program_header[seg_id].p_offset;
	243	seg_filesz = program_header[seg_id].p_filesz;
	244	seg_memsz = program_header[seg_id].p_memsz;
	245
[6]	246	// get segment base address in buffer
[1]	247	seg_src_addr = (uint32_t)KERN_BASE + seg_offset;
	248
[6]	249	// Load segment to its final physical memory address
	250	boot_memcpy( (void*)seg_paddr,
	251	(void*)seg_src_addr,
	252	seg_filesz );
	253
	254	#if DEBUG_BOOT_ELF
	255	boot_printf("\n[BOOT INFO] in %s for file %s : found loadable segment\n"
	256	" base = %x / size = %x\n",
	257	__FUNCTION__ , KERNEL_PATHNAME , seg_paddr , seg_memsz );
	258	#endif
	259
[1]	260	// Fill remaining memory with zero if (filesz < memsz).
[6]	261	if( seg_memsz < seg_filesz )
[1]	262	{
[6]	263	boot_memset( (void*)(seg_paddr + seg_filesz), 0, seg_memsz - seg_filesz);
[1]	264	}
	265
[279]	266	// Note: we suppose that the 'kernel.elf' file contains exactly
[296]	267	// three loadable segments ktext, kentry, & kdata:
	268	// - the kcode segment is read-only and base == KCODE_BASE
	269	// - the kentry segment is read-only and base == KENTRY_BASE
[6]	270
[279]	271	if( ((program_header[seg_id].p_flags & PF_W) == 0) &&
[296]	272	(program_header[seg_id].p_paddr == KCODE_BASE) ) // kcode segment
[1]	273	{
[6]	274	if( kcode_found )
	275	{
	276	boot_printf("\n[BOOT_ERROR] in %s for file %s :\n"
[279]	277	" two kcode segments found\n",
[6]	278	__FUNCTION__ , KERNEL_PATHNAME );
	279	boot_exit();
	280	}
	281
	282	kcode_found = true;
	283	seg_kcode_base = seg_paddr;
	284	seg_kcode_size = seg_memsz;
[1]	285	}
[296]	286	else if( program_header[seg_id].p_paddr == KENTRY_BASE ) // kentry segment
[6]	287	{
[296]	288	if( kentry_found )
[279]	289	{
	290	boot_printf("\n[BOOT_ERROR] in %s for file %s :\n"
[296]	291	" two kentry segments found\n",
[279]	292	__FUNCTION__ , KERNEL_PATHNAME );
	293	boot_exit();
	294	}
	295
[296]	296	kentry_found = true;
	297	seg_kentry_base = seg_paddr;
	298	seg_kentry_size = seg_memsz;
[279]	299	}
	300	else // kdata segment
	301	{
[6]	302	if( kdata_found )
	303	{
	304	boot_printf("\n[BOOT_ERROR] in %s for file %s :\n"
	305	" two loadable kdata segments found\n",
	306	__FUNCTION__ , KERNEL_PATHNAME );
	307	boot_exit();
	308	}
	309
	310	kdata_found = true;
	311	seg_kdata_base = seg_paddr;
	312	seg_kdata_size = seg_memsz;
	313	}
[1]	314	}
	315	}
	316
[6]	317	// check kcode & kdata segments found
	318	if( kcode_found == false )
	319	{
[279]	320	boot_printf("\n[BOOT_ERROR] in %s for file %s : seg_kcode not found\n",
[6]	321	__FUNCTION__ , KERNEL_PATHNAME );
	322	boot_exit();
	323	}
[296]	324	if( kentry_found == false )
[279]	325	{
[296]	326	boot_printf("\n[BOOT_ERROR] in %s for file %s : seg_kentry not found\n",
[279]	327	__FUNCTION__ , KERNEL_PATHNAME );
	328	boot_exit();
	329	}
[6]	330	if( kdata_found == false )
	331	{
[279]	332	boot_printf("\n[BOOT_ERROR] in %s for file %s : seg_kdata not found\n",
[6]	333	__FUNCTION__ , KERNEL_PATHNAME );
	334	boot_exit();
	335	}
	336
[296]	337	// check segments sizes
	338	if( seg_kentry_size > KENTRY_MAX_SIZE )
	339	{
	340	boot_printf("\n[BOOT_ERROR] in %s for file %s : seg_kentry too large\n",
	341	__FUNCTION__ , KERNEL_PATHNAME );
	342	boot_exit();
	343	}
	344
	345	if( (seg_kcode_size + seg_kdata_size) > KCODE_MAX_SIZE )
	346	{
	347	boot_printf("\n[BOOT_ERROR] in %s for file %s : seg_kcode + seg_kdata too large\n",
	348	__FUNCTION__ , KERNEL_PATHNAME );
	349	}
	350
[6]	351	// set entry point
[1]	352	kernel_entry = (uint32_t)elf_header->e_entry;
	353
[6]	354	#if DEBUG_BOOT_ELF
[279]	355	boot_printf("\n[BOOT INFO] %s completed for file %s at cycle %d\n",
[6]	356	__FUNCTION__ , KERNEL_PATHNAME , boot_get_proctime() );
	357	#endif
	358
[1]	359	} // boot_kernel_load()
	360
[6]	361	/*************************************************************************************
	362	* This function initializes the boot_info_t structure for a given cluster.
	363	* @ boot_info : pointer to local boot_info_t structure
	364	* @ cxy : cluster identifier
	365	************************************************************************************/
[1]	366	static void boot_info_init( boot_info_t * boot_info,
	367	cxy_t cxy )
	368	{
[6]	369	archinfo_header_t * header;
[1]	370	archinfo_core_t * core_base;
	371	archinfo_cluster_t * cluster_base;
	372	archinfo_device_t * device_base;
	373	archinfo_irq_t * irq_base;
	374
	375	archinfo_cluster_t * cluster;
[6]	376	archinfo_cluster_t * my_cluster = NULL; // target cluster
	377	archinfo_cluster_t * io_cluster = NULL; // cluster containing ext. peripherals
	378
[1]	379	archinfo_core_t * core;
	380	uint32_t core_id;
	381	archinfo_device_t * device;
	382	uint32_t device_id;
	383	archinfo_irq_t * irq;
	384	uint32_t irq_id;
[50]	385	uint32_t end;
[1]	386	boot_device_t * boot_dev;
	387
[6]	388	// get pointer on ARCHINFO header and on the four arch_info arrays
	389	header = (archinfo_header_t*)ARCHINFO_BASE;
	390	core_base = archinfo_get_core_base (header);
	391	cluster_base = archinfo_get_cluster_base(header);
	392	device_base = archinfo_get_device_base (header);
	393	irq_base = archinfo_get_irq_base (header);
	394
[1]	395	// Initialize global platform parameters
	396	boot_info->x_size = header->x_size;
	397	boot_info->y_size = header->y_size;
	398	boot_info->x_width = header->x_width;
	399	boot_info->y_width = header->y_width;
	400	boot_info->paddr_width = header->paddr_width;
	401	boot_info->io_cxy = header->io_cxy;
	402
[50]	403	// Initialize kernel segments from global variables
[296]	404	boot_info->kcode_base = seg_kcode_base;
	405	boot_info->kcode_size = seg_kcode_size;
	406	boot_info->kdata_base = seg_kdata_base;
	407	boot_info->kdata_size = seg_kdata_size;
	408	boot_info->kentry_base = seg_kentry_base;
	409	boot_info->kentry_size = seg_kentry_size;
[1]	410
[6]	411	// loop on arch_info clusters to get relevant pointers
[1]	412	for (cluster = cluster_base;
	413	cluster < &cluster_base[header->x_size * header->y_size];
	414	cluster++)
	415	{
[6]	416	if( cluster->cxy == cxy ) my_cluster = cluster;
	417	if( cluster->cxy == header->io_cxy ) io_cluster = cluster;
	418	}
[1]	419
[6]	420	if( my_cluster == NULL )
	421	{
	422	boot_printf("\n[ERROR] in %s : cannot found cluster %x in arch_info\n",
	423	__FUNCTION__ , cxy );
	424	boot_exit();
	425	}
[1]	426
[6]	427	if( io_cluster == NULL )
	428	{
	429	boot_printf("\n[ERROR] in %s : cannot found io_cluster %x in arch_info\n",
	430	__FUNCTION__ , header->io_cxy );
	431	boot_exit();
	432	}
	433
[204]	434	//////////////////////////////////////////////////////////
	435	// initialize the boot_info array of external peripherals
[6]	436
[1]	437	#if DEBUG_BOOT_INFO
[13]	438	boot_printf("\n[BOOT INFO] %s : external peripherals at cycle %d\n",
[188]	439	__FUNCTION__ , boot_get_proctime() );
[1]	440	#endif
[6]	441
	442	device_id = 0;
	443	for (device = &device_base[io_cluster->device_offset];
	444	device < &device_base[io_cluster->device_offset + io_cluster->devices];
	445	device++ )
	446	{
[188]	447	if( device_id >= CONFIG_MAX_EXT_DEV )
	448	{
	449	boot_printf("\n[ERROR] in %s : too much external devices in arch_info\n",
	450	__FUNCTION__ );
	451	boot_exit();
	452	}
	453
	454	// keep only external devices
[6]	455	if( (device->type != DEV_TYPE_RAM_SCL) &&
	456	(device->type != DEV_TYPE_ICU_XCU) &&
	457	(device->type != DEV_TYPE_MMC_TSR) &&
	458	(device->type != DEV_TYPE_DMA_SCL) )
[1]	459	{
[6]	460	boot_dev = &boot_info->ext_dev[device_id];
[1]	461
[6]	462	boot_dev->type = device->type;
	463	boot_dev->base = device->base;
	464	boot_dev->channels = device->channels;
	465	boot_dev->param0 = device->arg0;
	466	boot_dev->param1 = device->arg1;
	467	boot_dev->param2 = device->arg2;
	468	boot_dev->param3 = device->arg3;
	469	boot_dev->irqs = device->irqs;
	470
	471	device_id++;
	472
[1]	473	#if DEBUG_BOOT_INFO
[6]	474	boot_printf(" - %s : base = %l / size = %l / channels = %d / irqs = %d\n",
	475	device_type_str( device->type ) , device->base , device->size ,
	476	device->channels , device->irqs );
[1]	477	#endif
[13]	478	}
[6]	479
[188]	480	// handle IRQs for PIC
[6]	481	if (device->type == DEV_TYPE_PIC_TSR)
	482	{
[188]	483	for (irq_id = 0; irq_id < CONFIG_MAX_EXTERNAL_IRQS ; irq_id++)
[6]	484	{
	485	boot_dev->irq[irq_id].valid = 0;
	486	}
[1]	487
[6]	488	for (irq = &irq_base[device->irq_offset];
	489	irq < &irq_base[device->irq_offset + device->irqs];
	490	irq++)
	491	{
	492	boot_dev->irq[irq->port].valid = 1;
	493	boot_dev->irq[irq->port].dev_type = irq->dev_type;
	494	boot_dev->irq[irq->port].channel = irq->channel;
	495	boot_dev->irq[irq->port].is_rx = irq->is_rx;
	496
	497	#if DEBUG_BOOT_INFO
	498	boot_printf(" . irq_port = %d / source = %s / channel = %d / is_rx = %d\n",
	499	irq->port , device_type_str( irq->dev_type ) , irq->channel , irq->is_rx );
	500	#endif
	501	}
[1]	502	}
[13]	503	} // end loop on io_cluster peripherals
[1]	504
[6]	505	// initialize number of external peripherals
	506	boot_info->ext_dev_nr = device_id;
	507
	508	// Initialize cluster specific resources
	509	boot_info->cxy = my_cluster->cxy;
	510
	511	#if DEBUG_BOOT_INFO
[188]	512	boot_printf("\n[BOOT INFO] %s : cores in cluster %x\n", __FUNCTION__ , cxy );
[6]	513	#endif
	514
[188]	515	////////////////////////////////////////
[6]	516	// Initialize array of core descriptors
	517	core_id = 0;
	518	for (core = &core_base[my_cluster->core_offset];
	519	core < &core_base[my_cluster->core_offset + my_cluster->cores];
	520	core++ )
	521	{
	522	boot_info->core[core_id].gid = (gid_t)core->gid;
	523	boot_info->core[core_id].lid = (lid_t)core->lid;
	524	boot_info->core[core_id].cxy = (cxy_t)core->cxy;
	525
	526	#if DEBUG_BOOT_INFO
	527	boot_printf(" - core_gid = %x : cxy = %x / lid = %d\n",
	528	core->gid , core->cxy , core->lid );
	529	#endif
	530	core_id++;
	531	}
	532
	533	// Initialize number of cores in my_cluster
	534	boot_info->cores_nr = core_id;
	535
[188]	536	//////////////////////////////////////////////////////////////////////
	537	// initialise boot_info array of internal devices (RAM, ICU, MMC, DMA)
[6]	538
	539	#if DEBUG_BOOT_INFO
[188]	540	boot_printf("\n[BOOT INFO] %s : internal peripherals in cluster %x\n", __FUNCTION__ , cxy );
[6]	541	#endif
	542
[188]	543	device_id = 0;
[6]	544	for (device = &device_base[my_cluster->device_offset];
	545	device < &device_base[my_cluster->device_offset + my_cluster->devices];
	546	device++ )
	547	{
[188]	548	// keep only internal devices
	549	if( (device->type == DEV_TYPE_RAM_SCL) \|\|
	550	(device->type == DEV_TYPE_ICU_XCU) \|\|
	551	(device->type == DEV_TYPE_MMC_TSR) \|\|
	552	(device->type == DEV_TYPE_DMA_SCL) )
[6]	553	{
[188]	554	if (device->type == DEV_TYPE_RAM_SCL) // RAM
	555	{
	556	// set number of physical memory pages
	557	boot_info->pages_nr = device->size >> CONFIG_PPM_PAGE_SHIFT;
[6]	558
[1]	559	#if DEBUG_BOOT_INFO
[50]	560	boot_printf(" - RAM : %x pages\n", boot_info->pages_nr );
[1]	561	#endif
[188]	562	}
	563	else // ICU / MMC / DMA
	564	{
	565	if( device_id >= CONFIG_MAX_INT_DEV )
	566	{
	567	boot_printf("\n[ERROR] in %s : too much internal devices in cluster %x\n",
	568	__FUNCTION__ , cxy );
	569	boot_exit();
	570	}
	571
	572	boot_dev = &boot_info->int_dev[device_id];
[13]	573
[188]	574	boot_dev->type = device->type;
	575	boot_dev->base = device->base;
	576	boot_dev->channels = device->channels;
	577	boot_dev->param0 = device->arg0;
	578	boot_dev->param1 = device->arg1;
	579	boot_dev->param2 = device->arg2;
	580	boot_dev->param3 = device->arg3;
	581	boot_dev->irqs = device->irqs;
[13]	582
[188]	583	device_id++;
	584
[13]	585	#if DEBUG_BOOT_INFO
[188]	586	boot_printf(" - %s : base = %l / size = %l / channels = %d / irqs = %d\n",
	587	device_type_str( device->type ) , device->base , device->size ,
	588	device->channels , device->irqs );
[13]	589	#endif
	590
[188]	591	// handle IRQs for ICU
	592	if (device->type == DEV_TYPE_ICU_XCU)
	593	{
	594	for (irq_id = 0; irq_id < CONFIG_MAX_INTERNAL_IRQS ; irq_id++)
	595	{
	596	boot_dev->irq[irq_id].valid = 0;
	597	}
[1]	598
[188]	599	for (irq = &irq_base[device->irq_offset];
	600	irq < &irq_base[device->irq_offset + device->irqs] ; irq++)
	601	{
	602	boot_dev->irq[irq->port].valid = 1;
	603	boot_dev->irq[irq->port].dev_type = irq->dev_type;
	604	boot_dev->irq[irq->port].channel = irq->channel;
	605	boot_dev->irq[irq->port].is_rx = irq->is_rx;
[1]	606
	607	#if DEBUG_BOOT_INFO
	608	boot_printf(" . irq_port = %d / source = %s / channel = %d / is_rx = %d\n",
	609	irq->port , device_type_str( irq->dev_type ) , irq->channel , irq->is_rx );
	610	#endif
	611
[188]	612	}
	613	}
[1]	614	}
	615	}
[188]	616	} // end loop on local peripherals
[1]	617
[204]	618	// initialize number of internal peripherals
[188]	619	boot_info->int_dev_nr = device_id;
[1]	620
[188]	621	// Get the top address of the kernel segments
[296]	622	end = boot_info->kdata_base + boot_info->kdata_size;
[50]	623
[279]	624	// compute number of physical pages occupied by the kernel code
[68]	625	boot_info->pages_offset = ( (end & CONFIG_PPM_PAGE_MASK) == 0 ) ?
[50]	626	(end >> CONFIG_PPM_PAGE_SHIFT) : (end >> CONFIG_PPM_PAGE_SHIFT) + 1;
	627
[296]	628	// no reserved sones for TSAR architecture
	629	boot_info->rsvd_nr = 0;
[50]	630
[6]	631	// set boot_info signature
	632	boot_info->signature = BOOT_INFO_SIGNATURE;
	633
[1]	634	} // boot_info_init()
	635
[6]	636	/***********************************************************************************
	637	* This function check the local boot_info_t structure for a given core.
	638	* @ boot_info : pointer to local 'boot_info_t' structure to be checked.
	639	* @ lid : core local identifier, index the core descriptor table.
	640	**********************************************************************************/
[1]	641	static void boot_check_core( boot_info_t * boot_info,
	642	lid_t lid)
	643	{
	644	gid_t gid; // global hardware identifier of this core
	645	boot_core_t * this; // BOOT_INFO core descriptor of this core.
	646
	647	// Get core hardware identifier
	648	gid = (gid_t)boot_get_procid();
	649
	650	// get pointer on core descriptor
	651	this = &boot_info->core[lid];
	652
	653	if ( (this->gid != gid) \|\| (this->cxy != boot_info->cxy) )
	654	{
	655	boot_printf("\n[BOOT ERROR] in boot_check_core() :\n"
	656	" - boot_info cxy = %x\n"
	657	" - boot_info lid = %d\n"
	658	" - boot_info gid = %x\n"
	659	" - actual gid = %x\n",
	660	this->cxy , this->lid , this->gid , gid );
	661	boot_exit();
	662	}
	663
	664	} // boot_check_core()
	665
[6]	666	/*********************************************************************************
	667	* This function is called by CP0 in cluster(0,0) to activate all other CP0s.
[1]	668	* It returns the number of CP0s actually activated.
[6]	669	********************************************************************************/
	670	static uint32_t boot_wake_all_cp0s()
[1]	671	{
[6]	672	archinfo_header_t* header; // Pointer on ARCHINFO header
	673	archinfo_cluster_t* cluster_base; // Pointer on ARCHINFO clusters base
	674	archinfo_cluster_t* cluster; // Iterator for loop on clusters
	675	archinfo_device_t* device_base; // Pointer on ARCHINFO devices base
	676	archinfo_device_t* device; // Iterator for loop on devices
	677	uint32_t cp0_nb = 0; // CP0s counter
[1]	678
	679	header = (archinfo_header_t*)ARCHINFO_BASE;
	680	cluster_base = archinfo_get_cluster_base(header);
	681	device_base = archinfo_get_device_base (header);
	682
	683	// loop on all clusters
	684	for (cluster = cluster_base;
	685	cluster < &cluster_base[header->x_size * header->y_size];
	686	cluster++)
	687	{
	688	// Skip boot cluster.
	689	if (cluster->cxy == BOOT_CORE_CXY)
	690	continue;
	691
	692	// Skip clusters without core (thus without CP0).
	693	if (cluster->cores == 0)
	694	continue;
	695
	696	// Skip clusters without device (thus without XICU).
	697	if (cluster->devices == 0)
	698	continue;
	699
[6]	700	// search XICU device associated to CP0, and send a WTI to activate it
[1]	701	for (device = &device_base[cluster->device_offset];
	702	device < &device_base[cluster->device_offset + cluster->devices];
	703	device++)
	704	{
[6]	705	if (device->type == DEV_TYPE_ICU_XCU)
[1]	706	{
[6]	707
	708	#if DEBUG_BOOT_WAKUP
[296]	709	boot_printf("\n[BOOT] core[%x,0] activated at cycle %d\n",
[6]	710	cluster->cxy , boot_get_proctime );
	711	#endif
	712
[1]	713	boot_remote_sw((xptr_t)device->base, (uint32_t)boot_entry);
	714	cp0_nb++;
	715	}
	716	}
	717	}
	718	return cp0_nb;
	719
	720	} // boot_wake_cp0()
	721
[6]	722	/*********************************************************************************
[188]	723	* This function is called by all CP0 to activate the other CPi cores.
	724	* @ boot_info : pointer to local 'boot_info_t' structure.
[6]	725	*********************************************************************************/
	726	static void boot_wake_local_cores(boot_info_t * boot_info)
[1]	727	{
[188]	728	unsigned int core_id;
[1]	729
[188]	730	// get pointer on XCU device descriptor in boot_info
	731	boot_device_t * xcu = &boot_info->int_dev[0];
[13]	732
	733	// loop on cores
	734	for (core_id = 1; core_id < boot_info->cores_nr; core_id++)
[1]	735	{
[6]	736
	737	#if DEBUG_BOOT_WAKUP
[296]	738	boot_printf("\n[BOOT] core[%x,%d] activated at cycle %d\n",
[6]	739	boot_info->cxy , core_id , boot_get_proctime() );
	740	#endif
[188]	741	// send an IPI
	742	boot_remote_sw( (xptr_t)(xcu->base + (core_id << 2)) , (uint32_t)boot_entry );
[1]	743	}
	744	} // boot_wake_local_cores()
	745
	746
[6]	747	/*********************************************************************************
[1]	748	* This main function of the boot-loader is called by the boot_entry()
	749	* function, and executed by all cores.
	750	* The arguments values are computed by the boot_entry code.
[6]	751	* @ lid : core local identifier,
[1]	752	* @ cxy : cluster identifier,
[6]	753	*********************************************************************************/
[1]	754	void boot_loader( lid_t lid,
	755	cxy_t cxy )
	756	{
[6]	757	boot_info_t * boot_info; // pointer on local boot_info_t structure
[1]	758
	759	if (lid == 0)
	760	{
[6]	761	/****************************************************
	762	* PHASE A : only CP0 in boot cluster executes it
	763	***************************************************/
[1]	764	if (cxy == BOOT_CORE_CXY)
	765	{
[296]	766	boot_printf("\n[BOOT] core[%x,%d] enters at cycle %d\n",
[6]	767	cxy , lid , boot_get_proctime() );
[1]	768
	769	// Initialize IOC driver
	770	if (USE_IOC_BDV) boot_bdv_init();
	771	else if (USE_IOC_HBA) boot_hba_init();
[6]	772	// else if (USE_IOC_SDC) boot_sdc_init();
	773	// else if (USE_IOC_SPI) boot_spi_init();
[1]	774	else if (!USE_IOC_RDK)
	775	{
[6]	776	boot_printf("\n[BOOT ERROR] in %s : no IOC driver\n");
[1]	777	boot_exit();
	778	}
	779
[6]	780	// Initialize FAT32.
[1]	781	boot_fat32_init();
	782
[6]	783	// Load the 'kernel.elf' file into memory from IOC, and set
	784	// the global variables defining the kernel layout
	785	boot_kernel_load();
	786
[296]	787	boot_printf("\n[BOOT] core[%x,%d] loaded kernel at cycle %d\n",
[6]	788	cxy , lid , boot_get_proctime() );
	789
[1]	790	// Load the arch_info.bin file into memory.
	791	boot_archinfo_load();
	792
[6]	793	// Get local boot_info_t structure base address.
[1]	794	// It is the first structure in the .kdata segment.
[6]	795	boot_info = (boot_info_t *)seg_kdata_base;
[1]	796
[6]	797	// Initialize local boot_info_t structure.
	798	boot_info_init( boot_info , cxy );
	799
	800	// check boot_info signature
[1]	801	if (boot_info->signature != BOOT_INFO_SIGNATURE)
	802	{
[296]	803	boot_printf("\n[BOOT ERROR] in %s reported by core[%x,%d]\n"
[6]	804	" illegal boot_info signature / should be %x\n",
	805	__FUNCTION__ , cxy , lid , BOOT_INFO_SIGNATURE );
[1]	806	boot_exit();
	807	}
	808
[296]	809	boot_printf("\n[BOOT] core[%x,%d] loaded boot_info at cycle %d\n",
[6]	810	cxy , lid , boot_get_proctime() );
[1]	811
	812	// Check core information.
	813	boot_check_core(boot_info, lid);
	814
[6]	815	// Activate other CP0s / get number of active CP0s
	816	active_cp0s_nr = boot_wake_all_cp0s() + 1;
[1]	817
[6]	818	// Wait until all clusters (i.e all CP0s) ready to enter kernel.
	819	boot_remote_barrier( XPTR( BOOT_CORE_CXY , &global_barrier ) ,
	820	active_cp0s_nr );
[1]	821
[6]	822	// activate other local cores
	823	boot_wake_local_cores( boot_info );
[1]	824
[296]	825	// display address extensions
	826	uint32_t cp2_data_ext;
	827	uint32_t cp2_ins_ext;
	828	asm volatile( "mfc2 %0, $24" : "=&r" (cp2_data_ext) );
	829	asm volatile( "mfc2 %0, $25" : "=&r" (cp2_ins_ext) );
	830	boot_printf("\n[BOOT] core[%x,%d] CP2_DATA_EXT = %x / CP2_INS_EXT = %x\n",
	831	cxy , lid , cp2_data_ext , cp2_ins_ext );
	832
[6]	833	// Wait until all local cores in cluster ready
	834	boot_remote_barrier( XPTR( cxy , &local_barrier ) ,
	835	boot_info->cores_nr );
[1]	836	}
[6]	837	/******************************************************************
	838	* PHASE B : all CP0s other than CP0 in boot cluster execute it
	839	*****************************************************************/
[1]	840	else
	841	{
[6]	842	// at this point, all INSTRUCTION address extension registers
	843	// point on cluster(0,0), but the DATA extension registers point
	844	// already on the local cluster to use the local stack.
	845	// To access the bootloader global variables we must first copy
	846	// the boot code (data and instructions) in the local cluster.
	847	boot_remote_memcpy( XPTR( cxy , BOOT_BASE ),
	848	XPTR( BOOT_CORE_CXY , BOOT_BASE ),
	849	BOOT_MAX_SIZE );
[1]	850
[6]	851	// from now, it is safe to refer to the boot code global variables
[296]	852	boot_printf("\n[BOOT] core[%x,%d] replicated boot code at cycle %d\n",
[6]	853	cxy , lid , boot_get_proctime() );
[1]	854
[296]	855	// switch to the INSTRUCTION local memory space, to avoid contention.
[1]	856	asm volatile("mtc2 %0, $25" :: "r"(cxy));
	857
[6]	858	// Copy the arch_info.bin file into the local memory.
[1]	859	boot_remote_memcpy(XPTR(cxy, ARCHINFO_BASE),
	860	XPTR(BOOT_CORE_CXY, ARCHINFO_BASE),
[6]	861	ARCHINFO_MAX_SIZE );
[1]	862
[296]	863	boot_printf("\n[BOOT] core[%x,%d] replicated arch_info at cycle %d\n",
[6]	864	cxy , lid , boot_get_proctime() );
[1]	865
[6]	866	// Copy the kcode segment into local memory
	867	boot_remote_memcpy( XPTR( cxy , seg_kcode_base ),
	868	XPTR( BOOT_CORE_CXY , seg_kcode_base ),
	869	seg_kcode_size );
[1]	870
[6]	871	// Copy the kdata segment into local memory
	872	boot_remote_memcpy( XPTR( cxy , seg_kdata_base ),
	873	XPTR( BOOT_CORE_CXY , seg_kdata_base ),
	874	seg_kdata_size );
	875
[296]	876	boot_printf("\n[BOOT] core[%x,%d] replicated kernel code at cycle %d\n",
[6]	877	cxy , lid , boot_get_proctime() );
	878
	879	// Get local boot_info_t structure base address.
	880	boot_info = (boot_info_t*)seg_kdata_base;
	881
[1]	882	// Initialize local boot_info_t structure.
[6]	883	boot_info_init( boot_info , cxy );
[1]	884
	885	// Check core information.
[6]	886	boot_check_core( boot_info , lid );
[1]	887
[6]	888	// get number of active clusters from BOOT_CORE cluster
	889	uint32_t count = boot_remote_lw( XPTR( BOOT_CORE_CXY , &active_cp0s_nr ) );
[1]	890
[6]	891	// Wait until all clusters (i.e all CP0s) ready to enter kernel
	892	boot_remote_barrier( XPTR( BOOT_CORE_CXY , &global_barrier ) , count );
[1]	893
[6]	894	// activate other local cores
	895	boot_wake_local_cores( boot_info );
	896
[296]	897	// display address extensions
	898	uint32_t cp2_data_ext;
	899	uint32_t cp2_ins_ext;
	900	asm volatile( "mfc2 %0, $24" : "=&r" (cp2_data_ext) );
	901	asm volatile( "mfc2 %0, $25" : "=&r" (cp2_ins_ext) );
	902	boot_printf("\n[BOOT] core[%x,%d] CP2_DATA_EXT = %x / CP2_INS_EXT = %x\n",
	903	cxy , lid , cp2_data_ext , cp2_ins_ext );
	904
[6]	905	// Wait until all local cores in cluster ready
	906	boot_remote_barrier( XPTR( cxy , &local_barrier ) ,
	907	boot_info->cores_nr );
[1]	908	}
	909	}
	910	else
	911	{
	912	/***************************************************************
[6]	913	* PHASE C: all non CP0 cores in all clusters execute it
[1]	914	**************************************************************/
	915
[6]	916	// Switch to the INSTRUCTIONS local memory space
	917	// to avoid contention at the boot cluster.
	918	asm volatile("mtc2 %0, $25" :: "r"(cxy));
[1]	919
[6]	920	// Get local boot_info_t structure base address.
	921	boot_info = (boot_info_t *)seg_kdata_base;
[1]	922
[6]	923	// Check core information
	924	boot_check_core(boot_info, lid);
[1]	925
[296]	926	// display address extensions
	927	uint32_t cp2_data_ext;
	928	uint32_t cp2_ins_ext;
	929	asm volatile( "mfc2 %0, $24" : "=&r" (cp2_data_ext) );
	930	asm volatile( "mfc2 %0, $25" : "=&r" (cp2_ins_ext) );
	931	boot_printf("\n[BOOT] core[%x,%d] CP2_DATA_EXT = %x / CP2_INS_EXT = %x\n",
	932	cxy , lid , cp2_data_ext , cp2_ins_ext );
	933
[6]	934	// Wait until all local cores in cluster ready
	935	boot_remote_barrier( XPTR( cxy , &local_barrier ) , boot_info->cores_nr );
[1]	936	}
	937
[13]	938	// Ech core compute stack pointer to the kernel idle-thread descriptor.
	939	// The array of idle-thread descriptors is allocated in the kdata segment,
	940	// just after the boot_info structure
[1]	941
[13]	942	uint32_t sp;
	943	uint32_t base;
	944	uint32_t offset = sizeof( boot_info_t );
	945	uint32_t pmask = CONFIG_PPM_PAGE_MASK;
	946	uint32_t psize = CONFIG_PPM_PAGE_SIZE;
	947
[296]	948
[13]	949	// compute base address of idle thread descriptors array
	950	if( offset & pmask ) base = seg_kdata_base + (offset & ~pmask) + psize;
	951	else base = seg_kdata_base + offset;
	952
	953	// compute stack pointer
	954	sp = base + ((lid + 1) * CONFIG_THREAD_DESC_SIZE) - 16;
	955
	956	// Each cores initialise stack pointer,
[6]	957	// reset the BEV bit in status register,
	958	// register "boot_info" argument in a0,
	959	// and jump to kernel_entry.
	960	asm volatile( "mfc0 $27, $12 \n"
	961	"lui $26, 0xFFBF \n"
	962	"ori $26, $26, 0xFFFF \n"
	963	"and $27, $27, $26 \n"
[296]	964	"mtc0 $27, $12 \n"
[6]	965	"move $4, %0 \n"
	966	"move $29, %1 \n"
	967	"jr %2 \n"
[13]	968	:: "r"(boot_info) , "r"(sp) , "r"(kernel_entry) );
[6]	969
[1]	970	} // boot_loader()

Note: See TracBrowser for help on using the repository browser.

Download in other formats: