source: trunk/user/kleenex/kleenex.c @ 683

Last change on this file since 683 was 676, checked in by alain, 4 years ago

Introduce chat application to test the named pipes.

File size: 8.3 KB
Line 
1///////////////////////////////////////////////////////////////////////////////////////
2//  file   : kleenex.c 
3//  date   : november 2019
4//  author : Alain Greiner
5///////////////////////////////////////////////////////////////////////////////////////
6//  This file describes the single thread "kleenex" application.
7//  That makes a copy of a file from one input file to another output file.
8//  - the first implementation uses the read / write syscalls.
9//  - the second implementation uses the mmap / munmap syscalls.
10///////////////////////////////////////////////////////////////////////////////////////
11
12#include <pthread.h>
13#include <sys/mman.h>
14#include <stdio.h>
15#include <stdlib.h>
16#include <fcntl.h>
17#include <sys/stat.h>
18#include <unistd.h>
19#include <almosmkh.h>
20
21#define IN_FILENAME     "misc/philips_1024.raw"
22#define OUT_FILENAME    "misc/philips_1024.new"
23#define FBF_TYPE        420         
24#define NPIXELS         1024
25#define NLINES          1024
26
27////////////////
28int main( void )
29{
30    int                fd_in;
31    int                fd_out;
32
33    int                fbf_width;
34    int                fbf_height;
35    int                fbf_type;
36
37    int                line;
38    int                pixel;
39
40    int                error;
41
42    unsigned long long start_cycle;
43
44    unsigned char      buf_in[NPIXELS * NLINES];
45    unsigned char      buf_out[NPIXELS * NLINES];
46
47    struct stat        st;
48
49    int                size_in  = NPIXELS * NLINES;
50    int                size_out = NPIXELS * NLINES;
51
52    // get  start cycle
53    get_cycle( &start_cycle );
54
55    printf("\n[kleenex] starts at cycle %d\n", (unsigned int)start_cycle );
56
57    // check frame buffer size
58    fbf_get_config( &fbf_width , &fbf_height , &fbf_type );
59
60    if( (NPIXELS != fbf_width) || (NLINES != fbf_height) )
61    {
62        printf("\n[kleenex error] FBF size [%d,%d] does not fit image size[%d,%d]\n",
63        fbf_width, fbf_height, NPIXELS, NLINES );
64        exit( 0 );
65    }
66
67    if( fbf_type != FBF_TYPE )
68    {
69        printf("\n[kleenex error] FBF type [%d] does not fit image type [%d]\n",
70        fbf_type, FBF_TYPE);
71        exit( 0 );
72    }
73
74    ////////// open input file
75    fd_in = open( IN_FILENAME , O_RDONLY , 0 );
76
77    if( fd_in < 0 )
78    {
79        printf("\n[kleenex error] Cannot open file <%s>\n", IN_FILENAME );
80        exit( 0 );
81    }
82
83    printf("\n[kleenex] open file <%s>\n", IN_FILENAME );
84
85    ////////// open output file
86    fd_out = open( OUT_FILENAME , O_CREAT , 0 );
87
88    if( fd_out < 0 )
89    {
90        printf("\n[kleenex error] Cannot open file <%s>\n", OUT_FILENAME );
91        exit( 0 );
92    }
93
94    printf("\n[kleenex] open file <%s>\n", OUT_FILENAME );
95
96    ////////// copy input image file to buf_in
97    if( read( fd_in , buf_in , size_in ) != size_in )
98    {
99        printf("\n[kleenex error] Cannot read file <%s>\n", IN_FILENAME );
100        exit( 0 );
101    }
102
103    printf("\n[kleenex]  copied file <%s> to buf_in\n", IN_FILENAME );
104
105    ////////// copy buf_in to buf_out
106    for( line = 0 ; line < NLINES ; line++ )
107    {
108        for( pixel = 0 ; pixel < NPIXELS ; pixel++ )
109        {
110            unsigned int index = (line*NPIXELS) + pixel;
111            buf_out[index] = buf_in[index];
112        }
113    }
114
115    printf("\n[kleenex]  moved buf_in to buf_out\n" );
116
117    ////////// display output image
118    error = fbf_write( buf_out , size_out , 0 );
119
120    if(error)
121    { 
122        printf("\n[kleenex error] cannot display buf_out\n");
123        exit( 0 );
124    }
125   
126    ////////// copy buf_out to to output image file
127    if( write( fd_out , buf_out , size_out ) != size_out )
128    {
129        printf("\n[kleenex error] Cannot write file <%s>\n", OUT_FILENAME );
130        exit( 0 );
131    }
132
133    printf("\n[kleenex]  copied buf_out to file <%s>\n", OUT_FILENAME );
134
135    ///////// check output file size
136    if ( stat( OUT_FILENAME , &st ) == -1)
137    {
138            printf("  error: cannot stat <%s>\n", OUT_FILENAME );
139    }
140    else
141    {
142        printf("\n[kleenex] size = %x for file <%s>\n", st.st_size , OUT_FILENAME );
143    }
144   
145    ///////// close input file
146    close( fd_in );
147
148    printf("\n[kleenex] closed file <%s>\n", IN_FILENAME );
149
150    //////// close output file
151    close( fd_out );
152   
153    printf("\n[kleenex] closed file <%s>\n", OUT_FILENAME );
154
155    exit(0);
156
157    return 0;
158}
159
160
161/* Another implementation using using the mmap / munmap syscalls
162 
163int main( void )
164{
165    int                fd_in;
166    int                fd_out;
167
168    unsigned int       fbf_width;
169    unsigned int       fbf_height;
170    unsigned int       fbf_type;
171
172    int                line;
173    int                pixel;
174
175    int                error;
176
177    unsigned long long start_cycle;
178
179
180    unsigned short   * buf_in;
181    unsigned char    * buf_out;
182
183    struct stat        st;
184
185    int                size_in  = NPIXELS * NLINES;
186    int                size_out = NPIXELS * NLINES;
187
188    // get  start cycle
189    get_cycle( &start_cycle );
190
191    printf("\n[kleenex] starts at cycle %d\n", (unsigned int)start_cycle );
192
193    // check frame buffer size
194    fbf_get_config( &fbf_width , &fbf_height , &fbf_type );
195
196    if( (NPIXELS != fbf_width) || (NLINES != fbf_height) )
197    {
198        printf("\n[kleenex error] FBF size [%d,%d] does not fit image size[%d,%d]\n",
199        fbf_width, fbf_height, NPIXELS, NLINES );
200        exit( 0 );
201    }
202
203    if( fbf_type != FBF_TYPE )
204    {
205        printf("\n[kleenex error] FBF type [%d] does not fit image type [%d]\n",
206        fbf_type, FBF_TYPE);
207        exit( 0 );
208    }
209
210    // open input file
211    fd_in = open( IN_FILENAME , O_RDONLY , 0 );
212
213    if( fd_in < 0 )
214    {
215        printf("\n[kleenex error] Cannot open file <%s>\n", IN_FILENAME );
216        exit( 0 );
217    }
218
219    printf("\n[kleenex] open file <%s>\n", IN_FILENAME );
220
221    // open output file
222    fd_out = open( OUT_FILENAME , O_CREAT , 0 );
223
224    if( fd_out < 0 )
225    {
226        printf("\n[kleenex error] Cannot open file <%s>\n", OUT_FILENAME );
227        exit( 0 );
228    }
229
230    printf("\n[kleenex] open file <%s>\n", OUT_FILENAME );
231
232    // TODO we must write one byte at the end of the output file
233    // to set the size of this file, and make the mmap() successful
234
235    // check output file size
236    if ( stat( OUT_FILENAME , &st ) == -1)
237    {
238            printf("  error: cannot stat <%s>\n", OUT_FILENAME );
239    }
240    else
241    {
242        printf("\n[kleenex] size = %x for file <%s>\n", st.st_size , OUT_FILENAME );
243    }
244   
245    // map buf_in to input file
246    buf_in = (unsigned short *)mmap( NULL,
247                                     NPIXELS * NLINES * 2,
248                                     PROT_READ,
249                                     MAP_FILE | MAP_SHARED,
250                                     fd_in,
251                                     0 );           // offset
252    if ( buf_in == NULL )
253    {
254        printf("\n[kleenex error] cannot map buf_in to file %s\n", IN_FILENAME );
255        exit( 0 );
256    }
257
258    printf("\n[kleenex] map buf_in to file <%s>\n", IN_FILENAME );
259
260    // map buf_out to output file
261    buf_out = (unsigned char *)mmap( NULL,
262                                     NPIXELS * NLINES,
263                                     PROT_WRITE,
264                                     MAP_FILE | MAP_SHARED,
265                                     fd_out,
266                                     0 );           // offset
267    if ( buf_out == NULL )
268    {
269        printf("\n[kleenex error] cannot map buf_out to file %s\n", OUT_FILENAME );
270        exit( 0 );
271    }
272
273    printf("\n[kleenex] map buf_out to file <%s>\n", OUT_FILENAME );
274
275    // copy buf_in to buf_out
276    for( line = 0 ; line < NLINES ; line++ )
277    {
278        for( pixel = 0 ; pixel < NPIXELS ; pixel++ )
279        {
280            unsigned int index = (line*NPIXELS) + pixel;
281            buf_out[index] = buf_in[index];
282        }
283    }
284
285    printf("\n[kleenex]  moved buf_in to buf_out\n" );
286
287    // display output image
288    error = fbf_write( buf_out , size_out , 0 );
289
290    if(error)
291    {
292        printf("\n[kleenex error] cannot display buf_out\n");
293        exit( 0 );
294    }
295   
296    // unmap buf_in
297    munmap( buf_in , NPIXELS * NLINES * 2 );
298
299    // printf("\n[kleenex] unmap buf_in\n" );
300
301    // close input file
302    close( fd_in );
303
304    printf("\n[kleenex] closed file <%s>\n", IN_FILENAME );
305
306    // unmap buf_out
307    munmap( buf_out , NPIXELS * NLINES );
308
309    // printf("\n[kleenex] unmap buf_out\n" );
310
311    // close output file
312    close( fd_out );
313   
314    printf("\n[kleenex] closed file <%s>\n", OUT_FILENAME );
315
316    exit(0);
317
318    return 0;
319}
320
321*/
Note: See TracBrowser for help on using the repository browser.