source: soft/giet_vm/applications/coremark/readme.txt @ 808

File: CoreMark

Topic: Welcome
Copyright © 2009 EEMBC All rights reserved. 
CoreMark is a trademark of EEMBC and EEMBC is a registered trademark of the Embedded Microprocessor Benchmark Consortium.

CoreMark’s primary goals are simplicity and providing a method for testing only a processor’s core features. 

For more information about EEMBC's comprehensive embedded benchmark suites, please see www.eembc.org.

Topic: Building and running
        Download the release files from the www.coremark.org.
        You can verify the download using the coremark_<version>.md5 file
        > md5sum -c coremark_<version>.md5
        
        Unpack the distribution (tar -vzxf coremark_<version>.tgz && tar -vzxf coremark_<version>_docs.tgz) 
        then change to the coremark_<version> folder.
        
        To build and run the benchmark, type 
        > make
        Full results are available in the files run1.log and run2.log.
        CoreMark result can be found in run1.log.
        
        For self hosted Linux or Cygwin platforms, a simple make should work.
        
        Cross Compile:
        For cross compile platforms please adjust <core_portme.mak>, <core_portme.h> (and possibly <core_portme.c>) 
        according to the specific platform used.
        When porting to a new platform, it is recommended to copy one of the default port folders 
        (e.g. mkdir <platform> && cp linux/* <platform>), adjust the porting files, and run 
        > make PORT_DIR=<platform>
        
        Systems without make:
        The following files need to be compiled:
        - <core_list_join.c> 
        - <core_main.c> 
        - <core_matrix.c> 
        - <core_state.c>        
        - <core_util.c> 
        - <PORT_DIR>/<core_portme.c>
        
        For example
        > gcc -O2 -o coremark.exe core_list_join.c core_main.c core_matrix.c core_state.c core_util.c simple/core_portme.c -DPERFORMANCE_RUN=1 -DITERATIONS=1000 
        > ./coremark.exe > run1.log
        The above will compile the benchmark for a performance run and 1000 iterations. Output is redirected to run1.log.
        
        Make targets:
        run - Default target, creates run1.log and run2.log.
        run1.log - Run the benchmark with performance parameters, and output to run1.log
        run2.log - Run the benchmark with validation parameters, and output to run2.log
        run3.log - Run the benchmark with profile generation parameters, and output to run3.log
        compile - compile the benchmark executable 
        link - link the benchmark executable
        check - test MD5 of sources that may not be modified
        clean - clean temporary files
        
        ITERATIONS: 
        By default, the benchmark will run between 10-100 seconds.
        To override, use ITERATIONS=N
        > make ITERATIONS=10 
        Will run the benchmark for 10 iterations. 
        It is recommended to set a specific number of iterations in certain situations e.g.:
        - Running with a simulator
        - Measuring power/energy
        - Timing cannot be restarted
        
        Minimum required run time: 
        Results are only valid for reporting if the benchmark ran for at least 10 secs!
        
        XCFLAGS:
        To add compiler flags from the command line, use XCFLAGS e.g.
        > make XCFLAGS="-g -DMULTITHREAD=4 -DUSE_FORK=1"
        
        o CORE_DEBUG
        
        Define to compile for a debug run if you get incorrect CRC.
        > make XCFLAGS="-DCORE_DEBUG=1"
        
        o Parallel Execution
        
        Use XCFLAGS=-DMULTITHREAD=N where N is number of threads to run in parallel.
        Several implementations are available to execute in multiple contexts,
        or you can implement your own in <core_portme.c>.
        > make XCFLAGS="-DMULTITHREAD=4 -DUSE_PTHREAD" 
        Above will compile the benchmark for execution on 4 cores, using POSIX Threads API.
        
        REBUILD:
        To force rebuild, add the flag REBUILD to the command line
        > make REBUILD=1
        
        Check core_portme.mak for more important options.

        Run parameters for the benchmark executable:
        Coremark executable takes several parameters as follows (if main accepts arguments).
        1st - A seed value used for initialization of data.
        2nd - A seed value used for initialization of data.
        3rd - A seed value used for initialization of data.
        4th - Number of iterations (0 for auto : default value)
        5th - Reserved for internal use. 
        6th - Reserved for internal use. 
        7th - For malloc users only, ovreride the size of the input data buffer.
        
        The run target from make will run coremark with 2 different data initialization seeds.

        Alternative parameters: 
        If not using malloc or command line arguments are not supported, the buffer size
        for the algorithms must be defined via the compiler define TOTAL_DATA_SIZE.
        TOTAL_DATA_SIZE must be set to 2000 bytes (default) for standard runs.
        The default for such a target when testing different configurations could be ...
        > make XCFLAGS="-DTOTAL_DATA_SIZE=6000 -DMAIN_HAS_NOARGC=1"
        
Topic: Documentation
        When you unpack the documentation (tar -vzxf coremark_<version>_docs.tgz) a docs folder will be created.
        Check the file docs/html/index.html and the website http://www.coremark.org for more info.
        
Topic: Submitting results
        CoreMark results can be submitted on the web.
        
        Open a web browser and go to http://www.coremark.org/benchmark/index.php?pg=benchmark
        Select the link to add a new score and follow the instructions.
        
Topic: Run rules
        What is and is not allowed.
        
        Required:
        1 - The benchmark needs to run for at least 10 seconds.
        2 - All validation must succeed for seeds 0,0,0x66 and 0x3415,0x3415,0x66, 
                buffer size of 2000 bytes total.
                o If not using command line arguments to main:
                > make XCFLAGS="-DPERFORMANCE_RUN=1" REBUILD=1 run1.log
                > make XCFLAGS="-DVALIDATION_RUN=1" REBUILD=1 run2.log
        3 - If using profile guided optimization, profile must be generated using seeds of 8,8,8,
                and buffer size of 1200 bytes total.
                > make XCFLAGS="-DTOTAL_DATA_SIZE=1200 -DPROFILE_RUN=1" REBUILD=1 run3.log
        4 - All source files must be compiled with the same flags.
        5 - All data type sizes must match size in bits such that:
                o ee_u8 is an 8 bits datatype.
                o ee_s16 is an 16 bits datatype.
                o ee_u16 is an 16 bits datatype.
                o ee_s32 is an 32 bits datatype.
                o ee_u32 is an 32 bits datatype.
        
        Allowed:
        - Changing number of iterations
        - Changing toolchain and build/load/run options
        - Changing method of acquiring a data memory block
        - Changing the method of acquiring seed values
        - Changing implementation in core_portme.c
        - Changing configuration values in core_portme.h
        - Changing core_portme.mak
        
        Not allowed:
        - Changing of source file other then core_portme* (use make check to validate)

Topic: Reporting rules
        How to report results on a data sheet?

        CoreMark 1.0 : N / C [/ P] [/ M]
        
        N - Number of iterations per second with seeds 0,0,0x66,size=2000)
        C - Compiler version and flags
        P - Parameters such as data and code allocation specifics
                - This parameter *may* be omitted if all data was allocated on the heap in RAM.
                - This parameter *may not* be omitted when reporting CoreMark/MHz
        M - Type of parallel execution (if used) and number of contexts
                This parameter may be omitted if parallel execution was not used.

        e.g. 
        > CoreMark 1.0 : 128 / GCC 4.1.2 -O2 -fprofile-use / Heap in TCRAM / FORK:2 
        or
        > CoreMark 1.0 : 1400 / GCC 3.4 -O4 
        
        If reporting scaling results, the results must be reported as follows:
        
        CoreMark/MHz 1.0 : N / C / P [/ M]
        
        P - When reporting scaling results, memory parameter must also indicate memory frequency:core frequency ratio.
                - If the core has cache and cache frequency to core frequency ratio is configurable, that must also be included.
        
        e.g.
        > CoreMark/MHz 1.0 : 1.47 / GCC 4.1.2 -O2 / DDR3(Heap) 30:1 Memory 1:1 Cache

        
Topic: Log File Format
        The log files have the following format
(start example)
2K performance run parameters for coremark.     (Run type)
CoreMark Size           : 666                                   (Buffer size)
Total ticks                     : 25875                                 (platform dependent value)
Total time (secs)       : 25.875000                             (actual time in seconds)
Iterations/Sec          : 3864.734300                   (Performance value to report)
Iterations                      : 100000                                (number of iterations used)
Compiler version        : GCC3.4.4                              (Compiler and version)  
Compiler flags          : -O2                                   (Compiler and linker flags)
Memory location         : Code in flash, data in on chip RAM
seedcrc                         : 0xe9f5                                (identifier for the input seeds)
[0]crclist                      : 0xe714                                (validation for list part)
[0]crcmatrix            : 0x1fd7                                (validation for matrix part)
[0]crcstate                     : 0x8e3a                                (validation for state part)
[0]crcfinal                     : 0x33ff                                (iteration dependent output)
Correct operation validated. See readme.txt for run and reporting rules.  (*Only when run is successful*)
CoreMark 1.0 : 6508.490622 / GCC3.4.4 -O2 / Heap                                                  (*Only on a successful performance run*)              
(end example)

Topic: Legal
See LICENSE.txt or the word document file under docs/LICENSE.doc.
For more information on your legal rights to use this benchmark, please see
http://www.coremark.org/download/register.php?pg=register       

Topic: Credits
Many thanks to all of the individuals who helped with the development or testing of CoreMark including (Sorted by company name)
o Alan Anderson, ADI
o Adhikary Rajiv, ADI
o Elena Stohr, ARM
o Ian Rickards, ARM
o Andrew Pickard, ARM
o Trent Parker, CAVIUM
o Shay Gal-On, EEMBC
o Markus Levy, EEMBC
o Ron Olson, IBM
o Eyal Barzilay, MIPS
o Jens Eltze, NEC
o Hirohiko Ono, NEC
o Ulrich Drees, NEC
o Frank Roscheda, NEC
o Rob Cosaro, NXP
o Shumpei Kawasaki, RENESAS