source: soft/giet_vm/applications/router/main.c @ 644

Last change on this file since 644 was 457, checked in by alain, 10 years ago

Introducing the "classif" application.
Updating the "transpose", "convol", and "router" applications.

File size: 5.0 KB
Line 
1/////////////////////////////////////////////////////////////////////////////////////////////
2// File   : main.c   (for router application)
3// Date   : november 2014
4// author : Alain Greiner
5/////////////////////////////////////////////////////////////////////////////////////////////
6// This multi-threaded application emulates a packet routing communication application,
7// described as a TCG (Task and Communication Graph).
8// It contains 2 + N tasks : one "producer", one "consumer" and N "router")
9// It contains 2 MWMR channels : "fifo_in" and "fifo_out".
10// - The "producer" task writes NMAX token into "fifo_in".
11// - The N "router" tasks read token from "fifo_in" and write them into "fifo_out".
12// - The "consumer" task read token from "fifo_out" and displays instrumentation results.
13// Token are indexed (by the producer) from 0 to NMAX-1.
14// The router task contain a random delay emulating a variable processing time.
15//
16// This application is intended to run on a multi-processors, multi-clusters architecture,
17//  with one thread per processor.
18//
19// It uses the he following hardware parameters, defined in the hard_config.h file:
20// - X_SIZE       : number of clusters in a row
21// - Y_SIZE       : number of clusters in a column
22// - NB_PROCS_MAX : number of processors per cluster
23//
24// There is two global arrays (indexed by the token index) for insrumentation:
25// - The "router_tab" array is filled concurrently by all "router" tasks.
26//   Each entry contains the processor index that routed the token.
27// - The "consumer_tab" array is filled by the "consumer" task.
28//   Each entry contain the arrival order to the consumer task.
29/////////////////////////////////////////////////////////////////////////////////////////////
30
31#include "stdio.h"
32#include "mwmr_channel.h"
33#include "mapping_info.h"
34#include "hard_config.h"
35
36
37#define NMAX   50                       // total number of token
38#define DEPTH  20           // MWMR channels depth
39
40//////////////// MWMR channels and associated buffers  /////////////////////
41
42__attribute__((section (".data_in")))  mwmr_channel_t fifo_in;
43__attribute__((section (".data_in")))  unsigned int   buf_in[DEPTH];
44
45__attribute__((section (".data_out"))) mwmr_channel_t fifo_out;
46__attribute__((section (".data_out"))) unsigned int   buf_out[DEPTH];
47 
48//////////////// Instrumentation Counters //////////////////////////////////
49
50__attribute__((section (".data_out")))  unsigned int consumer_tab[NMAX];
51__attribute__((section (".data_out")))  unsigned int router_tab[NMAX];
52
53
54
55/////////////////////////////////////////////
56__attribute__ ((constructor)) void producer()
57{
58
59    unsigned int        n;
60    unsigned int        buf;
61
62    // get processor identifiers
63    unsigned int    x;
64    unsigned int    y;
65    unsigned int    lpid;
66    giet_proc_xyp( &x, &y, &lpid );
67
68    giet_shr_printf("\n*** Starting task producer on P[%d,%d,%d] at cycle %d\n", 
69                    x, y, lpid, giet_proctime() );
70
71    // initializes fifo_in
72    mwmr_init( &fifo_in, buf_in, 1 , DEPTH );
73
74    // main loop : display token value = source index
75    for(n = 0 ; n < NMAX ; n++) 
76    { 
77        buf = n;
78        mwmr_write( &fifo_in , &buf , 1 );
79    }
80
81    giet_exit( "Producer task completed");
82
83} // end producer()
84
85/////////////////////////////////////////////
86__attribute__ ((constructor)) void consumer()
87{
88    unsigned int        n;
89    unsigned int        buf;
90
91    // get processor identifiers
92    unsigned int    x;
93    unsigned int    y;
94    unsigned int    lpid;
95    giet_proc_xyp( &x, &y, &lpid );
96
97    giet_shr_printf("\n*** Starting task consumer on P[%d,%d,%d] at cycle %d\n", 
98                    x, y, lpid, giet_proctime() );
99
100    // initializes fifo_out
101    mwmr_init( &fifo_out, buf_out, 1 , DEPTH );
102
103    // main loop : register token arrival index and value
104    for( n = 0 ; n < NMAX ; n++ ) 
105    { 
106        mwmr_read( &fifo_out , &buf , 1 );
107        consumer_tab[n] = buf;
108    }
109
110    // instrumentation display
111    giet_shr_printf("\n");
112    for( n = 0 ; n < NMAX ; n++ )
113    {
114        giet_shr_printf("@@@ arrival = %d / value = %d / router = %x\n",
115                        n, consumer_tab[n], router_tab[n] );
116    }
117
118    giet_exit( "Consumer task completed");
119
120} // end consumer()
121
122///////////////////////////////////////////
123__attribute__ ((constructor)) void router()
124{
125    unsigned int        buf;
126    unsigned int        n;
127    unsigned int        tempo;
128
129    // get processor identifiers
130    unsigned int    x;
131    unsigned int    y;
132    unsigned int    lpid;
133    giet_proc_xyp( &x, &y, &lpid );
134
135    giet_shr_printf("\n*** Starting task router on P[%d,%d,%d] at cycle %d\n", 
136                    x, y, lpid, giet_proctime() );
137
138    // waiting fifo_in and fifo_out initialisation
139    while( (fifo_in.depth == 0) || (fifo_out.depth == 0) ) asm volatile( "nop" ); 
140
141    // main loop
142    while(1)
143    {
144        mwmr_read( &fifo_in , &buf , 1 );
145
146        tempo = giet_rand();
147        for ( n = 0 ; n < tempo ; n++ ) asm volatile ( "nop" );
148
149        router_tab[buf] = (x<<(Y_WIDTH + P_WIDTH)) + (y<<P_WIDTH) + lpid;
150
151        mwmr_write( &fifo_out , &buf , 1 );
152    }
153} // end router
Note: See TracBrowser for help on using the repository browser.