Context Navigation

source: soft/giet_vm/giet_boot/boot.c @ 263

Last change on this file since 263 was 263, checked in by alain, 11 years ago

Introducing support for TSAR fixed format cluster index (cluster_xy)
We have now 4 parameters defined in map.xml:

X_WIDTH, Y_WIDTH define the fixed format (typically X_WIDTH = 4 / Y_WIDTH = 4)
X_SIZE, Y_SIZE define the actual TSAR 2D mesh variable size (from 1 to 16)

File size: 76.5 KB

Line
1	//////////////////////////////////////////////////////////////////////////////////////////
2	// File : boot.c
3	// Date : 01/11/2013
4	// Author : alain greiner
5	// Copyright (c) UPMC-LIP6
6	//////////////////////////////////////////////////////////////////////////////////////////
7	// The boot.c file is part of the GIET-VM nano-kernel.
8	//
9	// This nano-kernel has been written for the MIPS32 processor.
10	// The virtual adresses are on 32 bits and use the (unsigned int) type, but the
11	// physicals addresses can have up to 40 bits, and use the (unsigned long long) type.
12	// It natively supports clusterised shared mmemory multi-processors architectures,
13	// where each processor is identified by a composite index (cluster_xy, local_id),
14	// and where there is one physical memory bank per cluster.
15	//
16	// This code is executed in the boot phase by proc[0] and performs the following tasks:
17	// - load into memory the giet_vm binary files, contained in a FAT32 file system,
18	// - build the various page tables (one page table per vspace)
19	// - initialize the shedulers (one scheduler per processor)
20	//
21	// 1) The binary files to be loaded are:
22	// - the "map.bin" file contains the hardware architecture description and the
23	// mapping directives. It must be stored in the the seg_boot_mapping segment
24	// (at address seg_boot_mapping_base).
25	// - the "sys.elf" file contains the kernel binary code and data.
26	// - the various "application.elf" files.
27	//
28	// 2) The map.bin file contains the binary representation of the map.xml file defining:
29	// - the hardware architecture: number of clusters, number or processors,
30	// size of the memory segments, and peripherals in each cluster.
31	// - The structure of the various multi-threaded software applications:
32	// number of tasks, communication channels.
33	// - The mapping: placement of virtual objects (vobj) in the virtual segments (vseg),
34	// placement of virtual segments (vseg) in the physical segments (pseg), placement
35	// of software tasks on the processors,
36	//
37	// 3) The GIET-VM uses the paged virtual memory to provides two services:
38	// - classical memory protection, when several independant applications compiled
39	// in different virtual spaces are executing on the same hardware platform.
40	// - data placement in NUMA architectures, when we want to control the placement
41	// of the software objects (virtual segments) on the physical memory banks.
42	//
43	// The page table are statically build in the boot phase, and they do not
44	// change during execution. The GIET uses only 4 Kbytes pages.
45	// As most applications use only a limited number of segments, the number of PT2s
46	// actually used by a given virtual space is generally smaller than 2048, and is
47	// computed during the boot phase.
48	// The max number of virtual spaces (GIET_NB_VSPACE_MAX) is a configuration parameter.
49	//
50	// Each page table (one page table per virtual space) is monolithic, and contains
51	// one PT1 and up to (GIET_NB_PT2_MAX) PT2s. The PT1 is addressed using the ix1 field
52	// (11 bits) of the VPN, and the selected PT2 is addressed using the ix2 field (9 bits).
53	// - PT1[2048] : a first 8K aligned array of unsigned int, indexed by (ix1) field of VPN.
54	// Each entry in the PT1 contains a 32 bits PTD. The MSB bit PTD[31] is
55	// the PTD valid bit, and LSB bits PTD[19:0] are the 20 MSB bits of the physical base
56	// address of the selected PT2.
57	// The PT1 contains 2048 PTD of 4 bytes => 8K bytes.
58	// - PT2[1024][GIET_NB_PT2_MAX] : an array of array of unsigned int.
59	// Each PT2[1024] must be 4K aligned, each entry in a PT2 contains two unsigned int:
60	// the first word contains the protection flags, and the second word contains the PPN.
61	// Each PT2 contains 512 PTE2 of 8bytes => 4K bytes.
62	// The total size of a page table is finally = 8K + (GIET_NB_PT2_MAX)*4K bytes.
63	///////////////////////////////////////////////////////////////////////////////////////
64	// Implementation Notes:
65	//
66	// 1) The cluster_id variable is a linear index in the mapping_info array of clusters.
67	// We use the cluster_xy variable for the tological index = x << Y_WIDTH + y
68	///////////////////////////////////////////////////////////////////////////////////////
69
70	// for vobjs initialisation
71	#include <giet_config.h>
72	#include <mwmr_channel.h>
73	#include <barrier.h>
74	#include <memspace.h>
75	#include <tty_driver.h>
76	#include <xcu_driver.h>
77	#include <ioc_driver.h>
78	#include <dma_driver.h>
79	#include <cma_driver.h>
80	#include <nic_driver.h>
81	#include <ioc_driver.h>
82	#include <mwr_driver.h>
83	#include <ctx_handler.h>
84	#include <irq_handler.h>
85	#include <vmem.h>
86	#include <utils.h>
87	#include <elf-types.h>
88
89	// for boot FAT initialisation
90	#include <fat32.h>
91
92	#include <mips32_registers.h>
93	#include <stdarg.h>
94
95	#if !defined(X_SIZE)
96	# error The X_SIZE value must be defined in the 'hard_config.h' file !
97	#endif
98
99	#if !defined(Y_SIZE)
100	# error The Y_SIZE value must be defined in the 'hard_config.h' file !
101	#endif
102
103	#if !defined(X_WIDTH)
104	# error The X_WIDTH value must be defined in the 'hard_config.h' file !
105	#endif
106
107	#if !defined(Y_WIDTH)
108	# error The Y_WIDTH value must be defined in the 'hard_config.h' file !
109	#endif
110
111	#if !defined(NB_PROCS_MAX)
112	# error The NB_PROCS_MAX value must be defined in the 'hard_config.h' file !
113	#endif
114
115	#if !defined(GIET_NB_VSPACE_MAX)
116	# error The GIET_NB_VSPACE_MAX value must be defined in the 'giet_config.h' file !
117	#endif
118
119	////////////////////////////////////////////////////////////////////////////
120	// Global variables for boot code
121	// Both the page tables for the various virtual spaces, and the schedulers
122	// for the processors are physically distributed on the clusters.
123	// These global variables are just arrays of pointers.
124	////////////////////////////////////////////////////////////////////////////
125
126	// This global variable is allocated in "fat32.c" file
127	extern fat32_fs_t fat;
128
129	// Page table addresses arrays
130	__attribute__((section (".bootdata")))
131	paddr_t _ptabs_paddr[GIET_NB_VSPACE_MAX];
132
133	__attribute__((section (".bootdata")))
134	unsigned int _ptabs_vaddr[GIET_NB_VSPACE_MAX];
135
136	// Next free PT2 index array
137	__attribute__((section (".bootdata")))
138	unsigned int _next_free_pt2[GIET_NB_VSPACE_MAX] =
139	{ [0 ... GIET_NB_VSPACE_MAX - 1] = 0 };
140
141	// Max PT2 index
142	__attribute__((section (".bootdata")))
143	unsigned int _max_pt2[GIET_NB_VSPACE_MAX] =
144	{ [0 ... GIET_NB_VSPACE_MAX - 1] = 0 };
145
146	// Scheduler pointers array (virtual addresses)
147	// indexed by (x,y,lpid) : ((x << Y_WIDTH) + y)*NB_PROCS_MAX + lpid
148	__attribute__((section (".bootdata")))
149	static_scheduler_t* _schedulers[NB_PROCS_MAX<<(X_WIDTH+Y_WIDTH)];
150
151
152	/////////////////////////////////////////////////////////////////////
153	// This function checks consistence beween the mapping_info data
154	// structure (soft), and the giet_config file (hard).
155	/////////////////////////////////////////////////////////////////////
156	void boot_mapping_check()
157	{
158	mapping_header_t * header = (mapping_header_t *) & seg_boot_mapping_base;
159
160	// checking mapping availability
161	if (header->signature != IN_MAPPING_SIGNATURE)
162	{
163	_puts("\n[BOOT ERROR] Illegal mapping signature: ");
164	_putx(header->signature);
165	_puts("\n");
166	_exit();
167	}
168
169	// checking number of clusters
170	if ( (header->x_size != X_SIZE) \|\|
171	(header->y_size != Y_SIZE) \|\|
172	(header->x_width != X_WIDTH) \|\|
173	(header->y_width != Y_WIDTH) )
174	{
175	_puts("\n[BOOT ERROR] Incoherent X_SIZE or Y_SIZE ");
176	_puts("\n - In hard_config: X_SIZE = ");
177	_putd( X_SIZE );
178	_puts(" / Y_SIZE = ");
179	_putd( Y_SIZE );
180	_puts(" / X_WIDTH = ");
181	_putd( X_WIDTH );
182	_puts(" / Y_WIDTH = ");
183	_putd( Y_WIDTH );
184	_puts("\n - In mapping_info: x_size = ");
185	_putd( header->x_size );
186	_puts(" / y_size = ");
187	_putd( header->y_size );
188	_puts(" / x_width = ");
189	_putd( header->x_width );
190	_puts(" / y_width = ");
191	_putd( header->y_width );
192	_puts("\n");
193	_exit();
194	}
195	// checking number of virtual spaces
196	if (header->vspaces > GIET_NB_VSPACE_MAX)
197	{
198	_puts("\n[BOOT ERROR] : number of vspaces > GIET_NB_VSPACE_MAX\n");
199	_puts("\n");
200	_exit();
201	}
202
203	#if BOOT_DEBUG_MAPPING
204	_puts("\n - x_size = ");
205	_putd( header->x_size );
206	_puts("\n - y_size = ");
207	_putd( header->y_size );
208	_puts("\n - procs = ");
209	_putd( header->procs );
210	_puts("\n - periphs = ");
211	_putd( header->periphs );
212	_puts("\n - vspaces = ");
213	_putd( header->vspaces );
214	_puts("\n - tasks = ");
215	_putd( header->tasks );
216	_puts("\n");
217	_puts("\n - size of header = ");
218	_putd( MAPPING_HEADER_SIZE );
219	_puts("\n - size of cluster = ");
220	_putd( MAPPING_CLUSTER_SIZE );
221	_puts("\n - size of pseg = ");
222	_putd( MAPPING_PSEG_SIZE );
223	_puts("\n - size of proc = ");
224	_putd( MAPPING_PROC_SIZE );
225	_puts("\n - size of vspace = ");
226	_putd( MAPPING_VSPACE_SIZE );
227	_puts("\n - size of vseg = ");
228	_putd( MAPPING_VSEG_SIZE );
229	_puts("\n - size of vobj = ");
230	_putd( MAPPING_VOBJ_SIZE );
231	_puts("\n - size of task = ");
232	_putd( MAPPING_TASK_SIZE );
233	_puts("\n");
234
235	unsigned int cluster_id;
236	mapping_cluster_t * cluster = _get_cluster_base(header);
237	for( cluster_id = 0; cluster_id < X_SIZE*Y_SIZE ; cluster_id++)
238	{
239	_puts("\n - cluster[");
240	_putd( cluster[cluster_id].x );
241	_puts(",");
242	_putd( cluster[cluster_id].y );
243	_puts("]\n procs = ");
244	_putd( cluster[cluster_id].procs );
245	_puts("\n psegs = ");
246	_putd( cluster[cluster_id].psegs );
247	_puts("\n periphs = ");
248	_putd( cluster[cluster_id].periphs );
249	_puts("\n");
250	}
251	#endif
252
253	} // end boot_mapping_check()
254
255
256	//////////////////////////////////////////////////////////////////////////////
257	// boot_pseg_get()
258	// This function returns the pointer on a physical segment
259	// identified by the pseg index.
260	//////////////////////////////////////////////////////////////////////////////
261	mapping_pseg_t *boot_pseg_get(unsigned int seg_id)
262	{
263	mapping_header_t* header = (mapping_header_t*)(&seg_boot_mapping_base);
264	mapping_pseg_t * pseg = _get_pseg_base(header);
265
266	// checking argument
267	if (seg_id >= header->psegs)
268	{
269	_puts("\n[BOOT ERROR] : seg_id argument too large\n");
270	_puts(" in function boot_pseg_get()\n");
271	_exit();
272	}
273
274	return &pseg[seg_id];
275	}
276
277	//////////////////////////////////////////////////////////////////////////////
278	// boot_add_pte()
279	// This function registers a new PTE in the page table defined
280	// by the vspace_id argument, and updates both PT1 and PT2.
281	// A new PT2 is used when required.
282	// As the set of PT2s is implemented as a fixed size array (no dynamic
283	// allocation), this function checks a possible overflow of the PT2 array.
284	//////////////////////////////////////////////////////////////////////////////
285	void boot_add_pte(unsigned int vspace_id,
286	unsigned int vpn,
287	unsigned int flags,
288	unsigned int ppn,
289	unsigned int verbose)
290	{
291	unsigned int ix1;
292	unsigned int ix2;
293	paddr_t pt1_pbase; // PT1 physical base address
294	paddr_t pt2_pbase; // PT2 physical base address
295	paddr_t pte_paddr; // PTE physucal address
296	unsigned int pt2_id; // PT2 index
297	unsigned int ptd; // PTD : entry in PT1
298	unsigned int max_pt2; // max number of PT2s for a given vspace
299
300	ix1 = vpn >> 9; // 11 bits
301	ix2 = vpn & 0x1FF; // 9 bits
302
303	// check that the _max_pt2[vspace_id] has been set
304	max_pt2 = _max_pt2[vspace_id];
305
306	if (max_pt2 == 0)
307	{
308	_puts("Undefined page table for vspace ");
309	_putd(vspace_id);
310	_puts("\n");
311	_exit();
312	}
313
314
315	// get page table physical base address
316	pt1_pbase = _ptabs_paddr[vspace_id];
317
318	// get ptd in PT1
319	ptd = _physical_read(pt1_pbase + 4 * ix1);
320
321	if ((ptd & PTE_V) == 0) // invalid PTD: compute PT2 base address,
322	// and set a new PTD in PT1
323	{
324	pt2_id = _next_free_pt2[vspace_id];
325	if (pt2_id == max_pt2)
326	{
327	_puts("\n[BOOT ERROR] in boot_add_pte() function\n");
328	_puts("the length of the ptab vobj is too small\n");
329
330	_puts(" max_pt2 = ");
331	_putd( max_pt2 );
332	_puts("\n");
333	_puts(" pt2_id = ");
334	_putd( pt2_id );
335	_puts("\n");
336
337	_exit();
338	}
339	else
340	{
341	pt2_pbase = pt1_pbase + PT1_SIZE + PT2_SIZE * pt2_id;
342	ptd = PTE_V \| PTE_T \| (unsigned int) (pt2_pbase >> 12);
343	_physical_write( pt1_pbase + 4 * ix1, ptd);
344	_next_free_pt2[vspace_id] = pt2_id + 1;
345	}
346	}
347	else // valid PTD: compute PT2 base address
348	{
349	pt2_pbase = ((paddr_t)(ptd & 0x0FFFFFFF)) << 12;
350	}
351
352	// set PTE in PT2 : flags & PPN in two 32 bits words
353	pte_paddr = pt2_pbase + 8 * ix2;
354	_physical_write(pte_paddr , flags);
355	_physical_write(pte_paddr + 4, ppn);
356
357	if (verbose)
358	{
359	_puts(" / pt1_pbase = ");
360	_putl( pt1_pbase );
361	_puts(" / ptd = ");
362	_putl( ptd );
363	_puts(" / pt2_pbase = ");
364	_putl( pt2_pbase );
365	_puts(" / pte_paddr = ");
366	_putl( pte_paddr );
367	_puts(" / ppn = ");
368	_putx( ppn );
369	_puts("/\n");
370	}
371
372	} // end boot_add_pte()
373
374
375	/////////////////////////////////////////////////////////////////////
376	// This function build the page table for a given vspace.
377	// The physical base addresses for all vsegs (global and private)
378	// must have been previously computed and stored in the mapping.
379	// It initializes the MWMR channels.
380	/////////////////////////////////////////////////////////////////////
381	void boot_vspace_pt_build(unsigned int vspace_id)
382	{
383	unsigned int vseg_id;
384	unsigned int npages;
385	unsigned int ppn;
386	unsigned int vpn;
387	unsigned int flags;
388	unsigned int page_id;
389	unsigned int verbose = 0; // can be used to activate trace in add_pte()
390
391	mapping_header_t * header = (mapping_header_t *) & seg_boot_mapping_base;
392	mapping_vspace_t * vspace = _get_vspace_base(header);
393	mapping_vseg_t * vseg = _get_vseg_base(header);
394
395	// private segments
396	for (vseg_id = vspace[vspace_id].vseg_offset;
397	vseg_id < (vspace[vspace_id].vseg_offset + vspace[vspace_id].vsegs);
398	vseg_id++)
399	{
400	vpn = vseg[vseg_id].vbase >> 12;
401	ppn = (unsigned int) (vseg[vseg_id].pbase >> 12);
402
403	npages = vseg[vseg_id].length >> 12;
404	if ((vseg[vseg_id].length & 0xFFF) != 0) npages++;
405
406	flags = PTE_V;
407	if (vseg[vseg_id].mode & C_MODE_MASK) flags = flags \| PTE_C;
408	if (vseg[vseg_id].mode & X_MODE_MASK) flags = flags \| PTE_X;
409	if (vseg[vseg_id].mode & W_MODE_MASK) flags = flags \| PTE_W;
410	if (vseg[vseg_id].mode & U_MODE_MASK) flags = flags \| PTE_U;
411
412	#if BOOT_DEBUG_PT
413	_puts(vseg[vseg_id].name);
414	_puts(" : flags = ");
415	_putx(flags);
416	_puts(" / npages = ");
417	_putd(npages);
418	_puts(" / pbase = ");
419	_putl(vseg[vseg_id].pbase);
420	_puts("\n");
421	#endif
422	// loop on 4K pages
423	for (page_id = 0; page_id < npages; page_id++)
424	{
425	boot_add_pte(vspace_id, vpn, flags, ppn, verbose);
426	vpn++;
427	ppn++;
428	}
429	}
430
431	// global segments
432	for (vseg_id = 0; vseg_id < header->globals; vseg_id++)
433	{
434	vpn = vseg[vseg_id].vbase >> 12;
435	ppn = (unsigned int)(vseg[vseg_id].pbase >> 12);
436	npages = vseg[vseg_id].length >> 12;
437	if ((vseg[vseg_id].length & 0xFFF) != 0) npages++;
438
439	flags = PTE_V;
440	if (vseg[vseg_id].mode & C_MODE_MASK) flags = flags \| PTE_C;
441	if (vseg[vseg_id].mode & X_MODE_MASK) flags = flags \| PTE_X;
442	if (vseg[vseg_id].mode & W_MODE_MASK) flags = flags \| PTE_W;
443	if (vseg[vseg_id].mode & U_MODE_MASK) flags = flags \| PTE_U;
444
445	#if BOOT_DEBUG_PT
446	_puts(vseg[vseg_id].name);
447	_puts(" : flags = ");
448	_putx(flags);
449	_puts(" / npages = ");
450	_putd(npages);
451	_puts(" / pbase = ");
452	_putl(vseg[vseg_id].pbase);
453	_puts("\n");
454	#endif
455	// loop on 4K pages
456	for (page_id = 0; page_id < npages; page_id++)
457	{
458	boot_add_pte(vspace_id, vpn, flags, ppn, verbose);
459	vpn++;
460	ppn++;
461	}
462	}
463	} // end boot_vspace_pt_build()
464
465
466	///////////////////////////////////////////////////////////////////////////
467	// Align the value of paddr or vaddr to the required alignement,
468	// defined by alignPow2 == L2(alignement).
469	///////////////////////////////////////////////////////////////////////////
470	paddr_t paddr_align_to(paddr_t paddr, unsigned int alignPow2)
471	{
472	paddr_t mask = (1 << alignPow2) - 1;
473	return ((paddr + mask) & ~mask);
474	}
475
476	unsigned int vaddr_align_to(unsigned int vaddr, unsigned int alignPow2)
477	{
478	unsigned int mask = (1 << alignPow2) - 1;
479	return ((vaddr + mask) & ~mask);
480	}
481
482	///////////////////////////////////////////////////////////////////////////
483	// Set pbase for a vseg when identity mapping is required.
484	// The length of the vseg must be known.
485	// The ordered linked list of vsegs mapped on pseg must be updated,
486	// and overlap with previously mapped vsegs must be checked.
487	///////////////////////////////////////////////////////////////////////////
488	void boot_vseg_set_paddr_ident(mapping_vseg_t * vseg)
489	{
490	// checking vseg not already mapped
491	if (vseg->mapped != 0)
492	{
493	_puts("\n[BOOT ERROR] in boot_vseg_set_paddr_ident() : vseg ");
494	_puts( vseg->name );
495	_puts(" already mapped\n");
496	_exit();
497	}
498
499	// computes selected pseg pointer
500	mapping_pseg_t* pseg = boot_pseg_get( vseg->psegid );
501
502	// computes vseg alignment constraint
503	mapping_header_t* header = (mapping_header_t*)&seg_boot_mapping_base;
504	mapping_vobj_t* vobj_base = _get_vobj_base( header );
505	unsigned int align = vobj_base[vseg->vobj_offset].align;
506	if ( vobj_base[vseg->vobj_offset].align < 12 ) align = 12;
507
508	// computes required_pbase for identity mapping,
509	paddr_t required_pbase = (paddr_t)vseg->vbase;
510
511	// checks identity constraint against alignment constraint
512	if ( paddr_align_to( required_pbase, align) != required_pbase )
513	{
514	_puts("\n[BOOT ERROR] in boot_vseg_set_paddr_ident() : vseg ");
515	_puts( vseg->name );
516	_puts(" has uncompatible identity and alignment constraints\n");
517	_exit();
518	}
519
520	// We are looking for a contiguous space in target pseg.
521	// If there is vsegs already mapped, we scan the vsegs list to:
522	// - check overlap with already mapped vsegs,
523	// - try mapping in holes between already mapped vsegs,
524	// - update the ordered linked list if success
525	// We don't enter the loop if no vsegs is already mapped.
526	// implementation note: The next_vseg field is unsigned int,
527	// but we use it to store a MIP32 pointer on a vseg...
528
529	mapping_vseg_t* curr = 0;
530	mapping_vseg_t* prev = 0;
531	unsigned int min_pbase = pseg->base;
532
533	for ( curr = (mapping_vseg_t*)pseg->next_vseg ;
534	(curr != 0) && (vseg->mapped == 0) ;
535	curr = (mapping_vseg_t*)curr->next_vseg )
536	{
537	// looking before current vseg
538	if( (required_pbase >= min_pbase) &&
539	(curr->pbase >= (required_pbase + vseg->length)) ) // space found
540	{
541	vseg->pbase = required_pbase;
542	vseg->mapped = 1;
543
544	// update linked list
545	vseg->next_vseg = (unsigned int)curr;
546	if( curr == (mapping_vseg_t*)pseg->next_vseg )
547	pseg->next_vseg = (unsigned int)vseg;
548	else
549	prev->next_vseg = (unsigned int)vseg;
550	}
551	else // looking in space after curr
552	{
553	prev = curr;
554	min_pbase = curr->pbase + curr->length;
555	}
556	}
557
558	// no success in the loop
559	if( (vseg->mapped == 0) &&
560	(required_pbase >= min_pbase) &&
561	((required_pbase + vseg->length) <= (pseg->base + pseg->length)) )
562	{
563	vseg->pbase = required_pbase;
564	vseg->mapped = 1;
565
566	// update linked list
567	vseg->next_vseg = 0;
568	if ((curr == 0) && (prev == 0)) pseg->next_vseg = (unsigned int)vseg;
569	else prev->next_vseg = (unsigned int)vseg;
570	}
571
572	if( vseg->mapped == 0 )
573	{
574	_puts("\n[BOOT ERROR] in boot_vseg_set_paddr_ident() : vseg ");
575	_puts( vseg->name );
576	_puts(" cannot be mapped on pseg ");
577	_puts( pseg->name );
578	_puts("\n");
579	_exit();
580	}
581	} // end boot_vseg_set_paddr_ident()
582
583
584	////////////////////////////////////////////////////////////////////////////
585	// Set pbase for a vseg when there is no identity mapping constraint.
586	// This is the physical memory allocator (written by Q.Meunier).
587	// The length of the vseg must be known.
588	// All identity mapping vsegs must be already mapped.
589	// We use a linked list of already mapped vsegs, ordered by incresing pbase.
590	// We try to place the vseg in the "first fit" hole in this list.
591	////////////////////////////////////////////////////////////////////////////
592	void boot_vseg_set_paddr(mapping_vseg_t * vseg)
593	{
594	// checking vseg not already mapped
595	if ( vseg->mapped != 0 )
596	{
597	_puts("\n[BOOT ERROR] in boot_vseg_set_paddr() : vseg ");
598	_puts( vseg->name );
599	_puts(" already mapped\n");
600	_exit();
601	}
602
603	// computes selected pseg pointer
604	mapping_pseg_t* pseg = boot_pseg_get( vseg->psegid );
605
606	// computes vseg alignment constraint
607	mapping_header_t* header = (mapping_header_t*)&seg_boot_mapping_base;
608	mapping_vobj_t* vobj_base = _get_vobj_base( header );
609	unsigned int align = vobj_base[vseg->vobj_offset].align;
610	if ( vobj_base[vseg->vobj_offset].align < 12 ) align = 12;
611
612	// initialise physical base address, with alignment constraint
613	paddr_t possible_pbase = paddr_align_to( pseg->base, align );
614
615	// We are looking for a contiguous space in target pseg
616	// If there is vsegs already mapped, we scan the vsegs list to:
617	// - try mapping in holes between already mapped vsegs,
618	// - update the ordered linked list if success
619	// We don't enter the loop if no vsegs is already mapped.
620	// implementation note: The next_vseg field is unsigned int,
621	// but we use it to store a MIP32 pointer on a vseg...
622
623	mapping_vseg_t* curr = 0;
624	mapping_vseg_t* prev = 0;
625
626	for( curr = (mapping_vseg_t*)pseg->next_vseg ;
627	(curr != 0) && (vseg->mapped == 0) ;
628	curr = (mapping_vseg_t*)curr->next_vseg )
629	{
630	// looking for space before current vseg
631	if ( (curr->pbase >= possible_pbase + vseg->length) ) // space before curr
632	{
633	vseg->pbase = possible_pbase;
634	vseg->mapped = 1;
635
636	// update linked list
637	vseg->next_vseg = (unsigned int)curr;
638	if( curr == (mapping_vseg_t*)pseg->next_vseg )
639	pseg->next_vseg = (unsigned int)vseg;
640	else
641	prev->next_vseg = (unsigned int)vseg;
642	}
643	else // looking for space after curr
644	{
645	possible_pbase = paddr_align_to( curr->pbase + curr->length, align );
646	prev = curr;
647	}
648	}
649
650	// when no space found, try to allocate space after already mapped vsegs
651	if( (vseg->mapped == 0) &&
652	((possible_pbase + vseg->length) <= (pseg->base + pseg->length)) )
653	{
654	vseg->pbase = possible_pbase;
655	vseg->mapped = 1;
656
657	// update linked list
658	vseg->next_vseg = 0;
659	if ((curr == 0 ) && (prev == 0)) pseg->next_vseg = (unsigned int)vseg;
660	else prev->next_vseg = (unsigned int)vseg;
661	}
662
663	if( vseg->mapped == 0 )
664	{
665	_puts("\n[BOOT ERROR] in boot_vseg_set_paddr() : vseg ");
666	_puts( vseg->name );
667	_puts(" cannot be mapped on pseg ");
668	_puts( pseg->name );
669	_puts("\n");
670	_exit();
671	}
672	} // end boot_vseg_set_paddr()
673
674	///////////////////////////////////////////////////////////////////////////
675	// This function computes the physical base address for a vseg
676	// as specified in the mapping info data structure.
677	// It updates the pbase and the length fields of the vseg.
678	// It updates the pbase and vbase fields of all vobjs in the vseg.
679	// It updates the _ptabs_paddr[] and _ptabs_vaddr[] arrays.
680	// It is a global vseg if vspace_id = (-1).
681	///////////////////////////////////////////////////////////////////////////
682	void boot_vseg_map(mapping_vseg_t * vseg, unsigned int vspace_id)
683	{
684	unsigned int vobj_id;
685	unsigned int cur_vaddr;
686	paddr_t cur_paddr;
687	paddr_t cur_length;
688	unsigned int offset;
689
690	mapping_header_t * header = (mapping_header_t *) & seg_boot_mapping_base;
691	mapping_vobj_t * vobj = _get_vobj_base(header);
692
693	// loop on the vobjs contained in vseg to compute
694	// the vseg length, required for mapping.
695	cur_length = 0;
696	for ( vobj_id = vseg->vobj_offset;
697	vobj_id < (vseg->vobj_offset + vseg->vobjs);
698	vobj_id++ )
699	{
700	if (vobj[vobj_id].align)
701	{
702	cur_length = vaddr_align_to(cur_length, vobj[vobj_id].align);
703	}
704	cur_length += vobj[vobj_id].length;
705	}
706	vseg->length = paddr_align_to(cur_length, 12);
707
708	// mapping: computes vseg pbase address
709	if (vseg->ident != 0) // identity mapping
710	{
711	boot_vseg_set_paddr_ident( vseg );
712	}
713	else // unconstrained mapping
714	{
715	boot_vseg_set_paddr( vseg );
716	}
717
718	// second loop on vobjs contained in vseg to :
719	// initialize the vaddr and paddr fields of all vobjs,
720	// and initialize the page table pointers arrays
721
722	cur_vaddr = vseg->vbase;
723	cur_paddr = vseg->pbase;
724
725	for (vobj_id = vseg->vobj_offset;
726	vobj_id < (vseg->vobj_offset + vseg->vobjs); vobj_id++)
727	{
728	if (vobj[vobj_id].align)
729	{
730	cur_paddr = paddr_align_to(cur_paddr, vobj[vobj_id].align);
731	cur_vaddr = vaddr_align_to(cur_vaddr, vobj[vobj_id].align);
732	}
733	// set vaddr/paddr for current vobj
734	vobj[vobj_id].vaddr = cur_vaddr;
735	vobj[vobj_id].paddr = cur_paddr;
736
737	// initialize _ptabs_vaddr[] & boot_ptabs-paddr[] if PTAB
738	if (vobj[vobj_id].type == VOBJ_TYPE_PTAB)
739	{
740	if (vspace_id == ((unsigned int) -1)) // global vseg
741	{
742	_puts("\n[BOOT ERROR] in boot_vseg_map() function: ");
743	_puts("a PTAB vobj cannot be global");
744	_exit();
745	}
746	// we need at least one PT2
747	if (vobj[vobj_id].length < (PT1_SIZE + PT2_SIZE))
748	{
749	_puts("\n[BOOT ERROR] in boot_vseg_map() function, ");
750	_puts("PTAB too small, minumum size is: ");
751	_putx(PT1_SIZE + PT2_SIZE);
752	_exit();
753	}
754	// register both physical and virtual page table address
755	_ptabs_vaddr[vspace_id] = vobj[vobj_id].vaddr;
756	_ptabs_paddr[vspace_id] = vobj[vobj_id].paddr;
757
758	// reset all valid bits in PT1
759	for ( offset = 0 ; offset < 8192 ; offset = offset + 4)
760	{
761	_physical_write(cur_paddr + offset, 0);
762	}
763
764	// computing the number of second level pages
765	_max_pt2[vspace_id] = (vobj[vobj_id].length - PT1_SIZE) / PT2_SIZE;
766	}
767
768	// set next vaddr/paddr
769	cur_vaddr = cur_vaddr + vobj[vobj_id].length;
770	cur_paddr = cur_paddr + vobj[vobj_id].length;
771	} // end for vobjs
772
773	} // end boot_vseg_map()
774
775	/////////////////////////////////////////////////////////////////////
776	// This function builds the page tables for all virtual spaces
777	// defined in the mapping_info data structure, in three steps:
778	// - step 1 : It computes the physical base address for global vsegs
779	// and for all associated vobjs.
780	// - step 2 : It computes the physical base address for all private
781	// vsegs and all vobjs in each virtual space.
782	// - step 3 : It actually fill the page table for each vspace.
783	//
784	// Note: It must exist at least one vspace in the mapping_info...
785	/////////////////////////////////////////////////////////////////////
786	void boot_pt_init()
787	{
788	mapping_header_t * header = (mapping_header_t *) &seg_boot_mapping_base;
789	mapping_vspace_t * vspace = _get_vspace_base(header);
790	mapping_vseg_t * vseg = _get_vseg_base(header);
791
792	unsigned int vspace_id;
793	unsigned int vseg_id;
794
795	if (header->vspaces == 0 )
796	{
797	_puts("\n[BOOT ERROR] in boot_pt_init() : mapping ");
798	_puts( header->name );
799	_puts(" contains no vspace\n");
800	_exit();
801	}
802
803	#if BOOT_DEBUG_PT
804	_puts("\n[BOOT DEBUG] **** mapping global vsegs ****\n");
805	#endif
806
807	// step 1 : loop on global vsegs
808
809	// vsegs with identity mapping constraint first
810	for (vseg_id = 0; vseg_id < header->globals; vseg_id++)
811	{
812	if (vseg[vseg_id].ident == 1)
813	boot_vseg_map(&vseg[vseg_id], ((unsigned int) (-1)));
814	}
815
816	// unconstrained vsegs second
817	for (vseg_id = 0; vseg_id < header->globals; vseg_id++)
818	{
819	if (vseg[vseg_id].ident == 0)
820	boot_vseg_map(&vseg[vseg_id], ((unsigned int) (-1)));
821	}
822
823	// step 2 : loop on virtual vspaces to map private vsegs
824	for (vspace_id = 0; vspace_id < header->vspaces; vspace_id++)
825	{
826
827	#if BOOT_DEBUG_PT
828	_puts("\n[BOOT DEBUG] ****** mapping private vsegs in vspace ");
829	_puts(vspace[vspace_id].name);
830	_puts(" ******\n");
831	#endif
832
833	// vsegs with identity mapping constraint first
834	for (vseg_id = vspace[vspace_id].vseg_offset;
835	vseg_id < (vspace[vspace_id].vseg_offset + vspace[vspace_id].vsegs);
836	vseg_id++)
837	{
838	if (vseg[vseg_id].ident == 1)
839	boot_vseg_map(&vseg[vseg_id], vspace_id);
840	}
841	// unconstrained vsegs second
842	for (vseg_id = vspace[vspace_id].vseg_offset;
843	vseg_id < (vspace[vspace_id].vseg_offset + vspace[vspace_id].vsegs);
844	vseg_id++)
845	{
846	if (vseg[vseg_id].ident == 0)
847	boot_vseg_map(&vseg[vseg_id], vspace_id);
848	}
849	}
850
851	#if BOOT_DEBUG_PT
852	mapping_vseg_t* curr;
853	mapping_pseg_t* pseg = _get_pseg_base(header);
854	unsigned int pseg_id;
855	for( pseg_id = 0 ; pseg_id < header->psegs ; pseg_id++ )
856	{
857	_puts("\n[BOOT DEBUG] ****** vsegs mapped on pseg ");
858	_puts( pseg[pseg_id].name );
859	_putd( pseg[pseg_id].cluster);
860	_puts(" ******\n");
861	for( curr = (mapping_vseg_t*)pseg[pseg_id].next_vseg ;
862	curr != 0 ;
863	curr = (mapping_vseg_t*)curr->next_vseg )
864	{
865	_puts(" - vseg ");
866	_puts( curr->name );
867	_puts(" : len = ");
868	_putx( curr->length );
869	_puts(" / vbase ");
870	_putl( curr->vbase );
871	_puts(" / pbase ");
872	_putl( curr->pbase );
873	_puts("\n");
874	}
875	}
876	#endif
877
878	// step 3 : loop on the vspaces to build the page tables
879	for (vspace_id = 0; vspace_id < header->vspaces; vspace_id++)
880	{
881
882	#if BOOT_DEBUG_PT
883	_puts("\n[BOOT DEBUG] ****** building page table for vspace ");
884	_puts(vspace[vspace_id].name);
885	_puts(" ******\n");
886	#endif
887
888	boot_vspace_pt_build(vspace_id);
889
890	_puts("\n[BOOT] Page Table for vspace ");
891	_puts( vspace[vspace_id].name );
892	_puts(" completed at cycle ");
893	_putd( _get_proctime() );
894	_puts("\n");
895
896	#if BOOT_DEBUG_PT
897	_puts(" vaddr = ");
898	_putx( _ptabs_vaddr[vspace_id] );
899	_puts(" / paddr = ");
900	_putl( _ptabs_paddr[vspace_id] );
901	_puts(" / PT2 number = ");
902	_putd( _max_pt2[vspace_id] );
903	_puts("\n");
904	#endif
905	}
906	} // end boot_pt_init()
907
908	///////////////////////////////////////////////////////////////////////////////
909	// This function initializes all private vobjs defined in the vspaces,
910	// such as mwmr channels, barriers and locks, because these vobjs
911	// are not known, and not initialized by the compiler.
912	// The MMU is supposed to be activated...
913	///////////////////////////////////////////////////////////////////////////////
914	void boot_vobjs_init()
915	{
916	mapping_header_t* header = (mapping_header_t *) & seg_boot_mapping_base;
917	mapping_vspace_t* vspace = _get_vspace_base(header);
918	mapping_vobj_t* vobj = _get_vobj_base(header);
919
920	unsigned int vspace_id;
921	unsigned int vobj_id;
922
923	// loop on the vspaces
924	for (vspace_id = 0; vspace_id < header->vspaces; vspace_id++)
925	{
926
927	#if BOOT_DEBUG_VOBJS
928	_puts("\n[BOOT DEBUG] ****** vobjs initialisation in vspace ");
929	_puts(vspace[vspace_id].name);
930	_puts(" ******\n");
931	#endif
932
933	_set_mmu_ptpr( (unsigned int)(_ptabs_paddr[vspace_id] >> 13) );
934
935	unsigned int ptab_found = 0;
936
937	// loop on the vobjs
938	for (vobj_id = vspace[vspace_id].vobj_offset;
939	vobj_id < (vspace[vspace_id].vobj_offset + vspace[vspace_id].vobjs);
940	vobj_id++)
941	{
942	switch (vobj[vobj_id].type)
943	{
944	case VOBJ_TYPE_MWMR: // storage capacity is (vobj.length/4 - 5) words
945	{
946	mwmr_channel_t* mwmr = (mwmr_channel_t *) (vobj[vobj_id].vaddr);
947	mwmr->ptw = 0;
948	mwmr->ptr = 0;
949	mwmr->sts = 0;
950	mwmr->width = vobj[vobj_id].init;
951	mwmr->depth = (vobj[vobj_id].length >> 2) - 6;
952	mwmr->lock = 0;
953	#if BOOT_DEBUG_VOBJS
954	_puts("MWMR : ");
955	_puts(vobj[vobj_id].name);
956	_puts(" / depth = ");
957	_putd(mwmr->depth);
958	_puts(" / width = ");
959	_putd(mwmr->width);
960	_puts("\n");
961	#endif
962	break;
963	}
964	case VOBJ_TYPE_ELF: // initialisation done by the loader
965	{
966	#if BOOT_DEBUG_VOBJS
967	_puts("ELF : ");
968	_puts(vobj[vobj_id].name);
969	_puts(" / length = ");
970	_putx(vobj[vobj_id].length);
971	_puts("\n");
972	#endif
973	break;
974	}
975	case VOBJ_TYPE_BLOB: // initialisation done by the loader
976	{
977	#if BOOT_DEBUG_VOBJS
978	_puts("BLOB : ");
979	_puts(vobj[vobj_id].name);
980	_puts(" / length = ");
981	_putx(vobj[vobj_id].length);
982	_puts("\n");
983	#endif
984	break;
985	}
986	case VOBJ_TYPE_BARRIER: // init is the number of participants
987	{
988	giet_barrier_t* barrier = (giet_barrier_t *) (vobj[vobj_id].vaddr);
989	barrier->count = vobj[vobj_id].init;
990	barrier->init = vobj[vobj_id].init;
991	#if BOOT_DEBUG_VOBJS
992	_puts("BARRIER : ");
993	_puts(vobj[vobj_id].name);
994	_puts(" / init_value = ");
995	_putd(barrier->init);
996	_puts("\n");
997	#endif
998	break;
999	}
1000	case VOBJ_TYPE_LOCK: // init value is "not taken"
1001	{
1002	unsigned int* lock = (unsigned int *) (vobj[vobj_id].vaddr);
1003	*lock = 0;
1004	#if BOOT_DEBUG_VOBJS
1005	_puts("LOCK : ");
1006	_puts(vobj[vobj_id].name);
1007	_puts("\n");
1008	#endif
1009	break;
1010	}
1011	case VOBJ_TYPE_BUFFER: // nothing to initialise
1012	{
1013	#if BOOT_DEBUG_VOBJS
1014	_puts("BUFFER : ");
1015	_puts(vobj[vobj_id].name);
1016	_puts(" / paddr = ");
1017	_putl(vobj[vobj_id].paddr);
1018	_puts(" / length = ");
1019	_putx(vobj[vobj_id].length);
1020	_puts("\n");
1021	#endif
1022	break;
1023	}
1024	case VOBJ_TYPE_MEMSPACE:
1025	{
1026	giet_memspace_t* memspace = (giet_memspace_t *) vobj[vobj_id].vaddr;
1027	memspace->buffer = (void *) vobj[vobj_id].vaddr + 8;
1028	memspace->size = vobj[vobj_id].length - 8;
1029	#if BOOT_DEBUG_VOBJS
1030	_puts("MEMSPACE : ");
1031	_puts(vobj[vobj_id].name);
1032	_puts(" / vaddr = ");
1033	_putx(vobj[vobj_id].vaddr);
1034	_puts(" / length = ");
1035	_putx(vobj[vobj_id].length);
1036	_puts(" / buffer = ");
1037	_putx((unsigned int)memspace->buffer);
1038	_puts(" / size = ");
1039	_putx(memspace->size);
1040	_puts("\n");
1041	#endif
1042	break;
1043	}
1044	case VOBJ_TYPE_PTAB: // nothing to initialize
1045	{
1046	ptab_found = 1;
1047	#if BOOT_DEBUG_VOBJS
1048	_puts("PTAB : ");
1049	_puts(vobj[vobj_id].name);
1050	_puts(" / length = ");
1051	_putx(vobj[vobj_id].length);
1052	_puts("\n");
1053	#endif
1054	break;
1055	}
1056	case VOBJ_TYPE_CONST:
1057	{
1058	unsigned int* addr = (unsigned int *) vobj[vobj_id].vaddr;
1059	*addr = vobj[vobj_id].init;
1060	#if BOOT_DEBUG_VOBJS
1061	_puts("CONST : ");
1062	_puts(vobj[vobj_id].name);
1063	_puts(" / Paddr :");
1064	_putl(vobj[vobj_id].paddr);
1065	_puts(" / init = ");
1066	_putx(*addr);
1067	_puts("\n");
1068	#endif
1069	break;
1070	}
1071	default:
1072	{
1073	_puts("\n[BOOT ERROR] illegal vobj type: ");
1074	_putd(vobj[vobj_id].type);
1075	_puts("\n");
1076	_exit();
1077	}
1078	} // end switch type
1079	} // end loop on vobjs
1080	if (ptab_found == 0)
1081	{
1082	_puts("\n[BOOT ERROR] Missing PTAB for vspace ");
1083	_putd(vspace_id);
1084	_exit();
1085	}
1086	} // end loop on vspaces
1087
1088	} // end boot_vobjs_init()
1089
1090	///////////////////////////////////////////////////////////////////////////////
1091	// This function returns in the vbase and length buffers the virtual base
1092	// address and the length of the segment allocated to the schedulers array
1093	// in the cluster defined by the clusterid argument.
1094	///////////////////////////////////////////////////////////////////////////////
1095	void boot_get_sched_vaddr( unsigned int cluster_id,
1096	unsigned int* vbase,
1097	unsigned int* length )
1098	{
1099	mapping_header_t* header = (mapping_header_t *) & seg_boot_mapping_base;
1100	mapping_vobj_t* vobj = _get_vobj_base(header);
1101	mapping_vseg_t* vseg = _get_vseg_base(header);
1102	mapping_pseg_t* pseg = _get_pseg_base(header);
1103
1104	unsigned int vseg_id;
1105	unsigned int found = 0;
1106
1107	for ( vseg_id = 0 ; (vseg_id < header->vsegs) && (found == 0) ; vseg_id++ )
1108	{
1109	if ( (vobj[vseg[vseg_id].vobj_offset].type == VOBJ_TYPE_SCHED) &&
1110	(pseg[vseg[vseg_id].psegid].clusterid == cluster_id ) )
1111	{
1112	*vbase = vseg[vseg_id].vbase;
1113	*length = vobj[vseg[vseg_id].vobj_offset].length;
1114	found = 1;
1115	}
1116	}
1117	if ( found == 0 )
1118	{
1119	mapping_cluster_t* cluster = _get_cluster_base(header);
1120	_puts("\n[BOOT ERROR] No vobj of type SCHED in cluster [");
1121	_putd( cluster[cluster_id].x );
1122	_puts(",");
1123	_putd( cluster[cluster_id].y );
1124	_puts("]\n");
1125	_exit();
1126	}
1127	} // end boot_get_sched_vaddr()
1128
1129	////////////////////////////////////////////////////////////////////////////////////
1130	// This function initialises all processors schedulers.
1131	// This is done by processor 0, and the MMU must be activated.
1132	// - In Step 1, it initialises the _schedulers[gpid] pointers array, and scan
1133	// the processors to initialise the schedulers, including the
1134	// idle_task context (ltid == 14).
1135	// - In Step 2, it scan all tasks in all vspaces to initialise the tasks contexts,
1136	// as specified in the mapping_info data structure.
1137	////////////////////////////////////////////////////////////////////////////////////
1138	void boot_schedulers_init()
1139	{
1140	mapping_header_t* header = (mapping_header_t *) & seg_boot_mapping_base;
1141	mapping_cluster_t* cluster = _get_cluster_base(header);
1142	mapping_vspace_t* vspace = _get_vspace_base(header);
1143	mapping_task_t* task = _get_task_base(header);
1144	mapping_vobj_t* vobj = _get_vobj_base(header);
1145	mapping_proc_t* proc = _get_proc_base(header);
1146	mapping_irq_t* irq = _get_irq_base(header);
1147
1148	unsigned int cluster_id; // cluster index in mapping_info
1149	unsigned int proc_id; // processor index in mapping_info
1150	unsigned int irq_id; // irq index in mapping_info
1151	unsigned int vspace_id; // vspace index in mapping_info
1152	unsigned int task_id; // task index in mapping_info
1153
1154	// TTY, NIC, CMA, HBA, TIM and DMA channels allocators
1155	// - TTY[0] is reserved for the kernel
1156	// - In all clusters the first NB_PROCS_MAX timers
1157	// are reserved for the kernel (context switch)
1158
1159	unsigned int alloc_tty_channel = 1; // TTY channel allocator
1160	unsigned int alloc_nic_channel = 0; // NIC channel allocator
1161	unsigned int alloc_cma_channel = 0; // CMA channel allocator
1162	unsigned int alloc_hba_channel = 0; // IOC channel allocator
1163	unsigned int alloc_tim_channel[X_SIZE*Y_SIZE]; // user TIMER allocators
1164
1165	/////////////////////////////////////////////////////////////////////////
1166	// Step 1 : loop on the clusters and on the processors
1167	// to initialize the schedulers[] array of pointers,
1168	// and the interrupt vectors.
1169	// Implementation note:
1170	// We need to use both proc_id to scan the mapping info structure,
1171	// and lpid to access the schedulers array.
1172	// - the _schedulers[] array of pointers can contain "holes", because
1173	// it is indexed by the global pid = cluster_xy*NB_PROCS_MAX + lpid
1174	// - the mapping info array of processors is contiguous, it is indexed
1175	// by proc_id, and use an offset specific in each cluster.
1176
1177	for (cluster_id = 0 ; cluster_id < X_SIZE*Y_SIZE ; cluster_id++)
1178	{
1179	unsigned int x = cluster[cluster_id].x;
1180	unsigned int y = cluster[cluster_id].y;
1181	unsigned int cluster_xy = (x<<Y_WIDTH) + y;
1182
1183	#if BOOT_DEBUG_SCHED
1184	_puts("\n[BOOT DEBUG] Initialise schedulers in cluster[");
1185	_putd( x );
1186	_puts(",");
1187	_putd( y );
1188	_puts("]\n");
1189	#endif
1190	alloc_tim_channel[cluster_id] = NB_PROCS_MAX;
1191
1192	unsigned int lpid; // processor local index in cluster
1193	unsigned int sched_vbase; // schedulers segment virtual base address
1194	unsigned int sched_length; // schedulers segment length
1195	unsigned int nprocs; // number of processors in cluster
1196
1197	nprocs = cluster[cluster_id].procs;
1198
1199	// checking processors number
1200	if ( nprocs > NB_PROCS_MAX )
1201	{
1202	_puts("\n[BOOT ERROR] Too much processors in cluster[");
1203	_putd( x );
1204	_puts(",");
1205	_putd( y );
1206	_puts("]\n");
1207	_exit();
1208	}
1209
1210	// get scheduler array virtual base address and length
1211	boot_get_sched_vaddr( cluster_id, &sched_vbase, &sched_length );
1212
1213	// each processor scheduler requires 4 Kbytes
1214	if ( sched_length < (nprocs<<12) )
1215	{
1216	_puts("\n[BOOT ERROR] Schedulers segment too small in cluster[");
1217	_putd( x );
1218	_puts(",");
1219	_putd( y );
1220	_puts("]\n");
1221	_exit();
1222	}
1223
1224	// loop on processors
1225	for ( proc_id = cluster[cluster_id].proc_offset, lpid = 0 ;
1226	proc_id < cluster[cluster_id].proc_offset + cluster[cluster_id].procs;
1227	proc_id++, lpid++ )
1228	{
1229	// current processor scheduler pointer : psched
1230	static_scheduler_t* psched = (static_scheduler_t*)(sched_vbase+(lpid<<12));
1231
1232	// set the schedulers pointers array
1233	_schedulers[cluster_xy * NB_PROCS_MAX + lpid] = psched;
1234
1235	#if BOOT_DEBUG_SCHED
1236	_puts("\nProc_");
1237	_putd( x );
1238	_puts("_");
1239	_putd( y );
1240	_puts("_");
1241	_putd( lpid );
1242	_puts(" : scheduler virtual base address = ");
1243	_putx( sched_vbase + (lpid<<12) );
1244	_puts("\n");
1245	#endif
1246
1247	// initialise the "tasks" variable : default value is 0
1248	psched->tasks = 0;
1249
1250	// initialise the "current" variable : default value is idle_task
1251	psched->current = IDLE_TASK_INDEX;
1252
1253	// initialise interrupt_vector with default value (valid bit = 0)
1254	unsigned int slot;
1255	for (slot = 0; slot < 32; slot++) psched->interrupt_vector[slot] = 0;
1256
1257	// initialise interrupt vector with the IRQs actually allocated
1258	for (irq_id = proc[proc_id].irq_offset;
1259	irq_id < proc[proc_id].irq_offset + proc[proc_id].irqs;
1260	irq_id++)
1261	{
1262	unsigned int type = irq[irq_id].type;
1263	unsigned int icu_id = irq[irq_id].icuid;
1264	unsigned int isr_id = irq[irq_id].isr;
1265	unsigned int channel = irq[irq_id].channel;
1266
1267	unsigned int value = ((isr_id & 0xFF) ) \|
1268	((type & 0xFF) << 8) \|
1269	((channel & 0x7FFF) << 16) \|
1270	0x80000000; // Valid entry
1271
1272	psched->interrupt_vector[icu_id] = value;
1273
1274	#if BOOT_DEBUG_SCHED
1275	_puts("- IRQ : icu = ");
1276	_putd(icu_id);
1277	_puts(" / type = ");
1278	_putd(type);
1279	_puts(" / isr = ");
1280	_putd(isr_id);
1281	_puts(" / channel = ");
1282	_putd(channel);
1283	_puts(" => vector_entry = ");
1284	_putx( value );
1285	_puts("\n");
1286	#endif
1287	}
1288
1289	// initializes the idle_task context in scheduler:
1290	// - the SR slot is 0xFF03 because this task run in kernel mode.
1291	// - it uses the page table of vspace[0]
1292	// - it uses the kernel TTY terminal
1293	// - slots containing addresses (SP, RA, EPC, PTAB, PTPR)
1294	// must be re-initialised by kernel_parallel_init()
1295
1296	psched->context[IDLE_TASK_INDEX][CTX_SR_ID] = 0xFF03;
1297	psched->context[IDLE_TASK_INDEX][CTX_PTPR_ID] = _ptabs_paddr[0]>>13;
1298	psched->context[IDLE_TASK_INDEX][CTX_PTAB_ID] = _ptabs_vaddr[0];
1299	psched->context[IDLE_TASK_INDEX][CTX_TTY_ID] = 0;
1300	psched->context[IDLE_TASK_INDEX][CTX_LTID_ID] = IDLE_TASK_INDEX;
1301	psched->context[IDLE_TASK_INDEX][CTX_VSID_ID] = 0;
1302	psched->context[IDLE_TASK_INDEX][CTX_RUN_ID] = 1;
1303
1304	} // end for procs
1305	} // end for clusters
1306
1307	///////////////////////////////////////////////////////////////////
1308	// Step 2 : loop on the vspaces and the tasks
1309	// to initialise the schedulers and the task contexts.
1310
1311	for (vspace_id = 0; vspace_id < header->vspaces; vspace_id++)
1312	{
1313	// We must set the PTPR depending on the vspace, because the start_vector
1314	// and the stack address are defined in virtual space.
1315	_set_mmu_ptpr( (unsigned int)(_ptabs_paddr[vspace_id] >> 13) );
1316
1317	// loop on the tasks in vspace (task_id is the global index)
1318	for (task_id = vspace[vspace_id].task_offset;
1319	task_id < (vspace[vspace_id].task_offset + vspace[vspace_id].tasks);
1320	task_id++)
1321	{
1322
1323	// compute the cluster coordinates
1324	unsigned int x = cluster[task[task_id].clusterid].x;
1325	unsigned int y = cluster[task[task_id].clusterid].y;
1326	unsigned int cluster_xy = (x<<Y_WIDTH) + y;
1327
1328	#if BOOT_DEBUG_SCHED
1329	_puts("\n[BOOT DEBUG] Initialise context for task ");
1330	_puts( task[task_id].name );
1331	_puts(" in vspace ");
1332	_puts( vspace[vspace_id].name );
1333	_puts(" running on cluster[");
1334	_putd( x );
1335	_puts(",");
1336	_putd( y );
1337	_puts("]\n");
1338	#endif
1339	// compute gpid (global processor index) and scheduler base address
1340	unsigned int gpid = cluster_xy * NB_PROCS_MAX + task[task_id].proclocid;
1341	static_scheduler_t* psched = _schedulers[gpid];
1342
1343	// ctx_sr : value required before an eret instruction
1344	unsigned int ctx_sr = 0x0000FF13;
1345
1346	// ctx_ptpr : page table physical base address (shifted by 13 bit)
1347	unsigned int ctx_ptpr = (unsigned int)(_ptabs_paddr[vspace_id] >> 13);
1348
1349	// ctx_ptab : page_table virtual base address
1350	unsigned int ctx_ptab = _ptabs_vaddr[vspace_id];
1351
1352	// ctx_tty : TTY terminal global index provided by the global allocator
1353	unsigned int ctx_tty = 0xFFFFFFFF;
1354	if (task[task_id].use_tty)
1355	{
1356	if (alloc_tty_channel >= NB_TTY_CHANNELS)
1357	{
1358	_puts("\n[BOOT ERROR] TTY index too large for task ");
1359	_puts(task[task_id].name);
1360	_puts(" in vspace ");
1361	_puts(vspace[vspace_id].name);
1362	_puts("\n");
1363	_exit();
1364	}
1365	ctx_tty = alloc_tty_channel;
1366	alloc_tty_channel++;
1367	}
1368	// ctx_nic : NIC channel global index provided by the global allocator
1369	unsigned int ctx_nic = 0xFFFFFFFF;
1370	if (task[task_id].use_nic)
1371	{
1372	if (alloc_nic_channel >= NB_NIC_CHANNELS)
1373	{
1374	_puts("\n[BOOT ERROR] NIC channel index too large for task ");
1375	_puts(task[task_id].name);
1376	_puts(" in vspace ");
1377	_puts(vspace[vspace_id].name);
1378	_puts("\n");
1379	_exit();
1380	}
1381	ctx_nic = alloc_nic_channel;
1382	alloc_nic_channel++;
1383	}
1384	// ctx_cma : CMA channel global index provided by the global allocator
1385	unsigned int ctx_cma = 0xFFFFFFFF;
1386	if (task[task_id].use_cma)
1387	{
1388	if (alloc_cma_channel >= NB_CMA_CHANNELS)
1389	{
1390	_puts("\n[BOOT ERROR] CMA channel index too large for task ");
1391	_puts(task[task_id].name);
1392	_puts(" in vspace ");
1393	_puts(vspace[vspace_id].name);
1394	_puts("\n");
1395	_exit();
1396	}
1397	ctx_cma = alloc_cma_channel;
1398	alloc_cma_channel++;
1399	}
1400	// ctx_hba : HBA channel global index provided by the global allocator
1401	unsigned int ctx_hba = 0xFFFFFFFF;
1402	if (task[task_id].use_hba)
1403	{
1404	if (alloc_hba_channel >= NB_HBA_CHANNELS)
1405	{
1406	_puts("\n[BOOT ERROR] IOC channel index too large for task ");
1407	_puts(task[task_id].name);
1408	_puts(" in vspace ");
1409	_puts(vspace[vspace_id].name);
1410	_puts("\n");
1411	_exit();
1412	}
1413	ctx_hba = alloc_hba_channel;
1414	alloc_hba_channel++;
1415	}
1416	// ctx_tim : TIM local channel index provided by the cluster allocator
1417	unsigned int ctx_tim = 0xFFFFFFFF;
1418	if (task[task_id].use_tim)
1419	{
1420	unsigned int cluster_id = task[task_id].clusterid;
1421
1422	if ( alloc_tim_channel[cluster_id] >= NB_TIM_CHANNELS )
1423	{
1424	_puts("\n[BOOT ERROR] local TIMER index too large for task ");
1425	_puts(task[task_id].name);
1426	_puts(" in vspace ");
1427	_puts(vspace[vspace_id].name);
1428	_puts("\n");
1429	_exit();
1430	}
1431
1432	// checking that there is an ISR_TIMER installed
1433	unsigned int found = 0;
1434	for ( irq_id = 0 ; irq_id < 32 ; irq_id++ )
1435	{
1436	unsigned int entry = psched->interrupt_vector[irq_id];
1437	unsigned int isr = entry & 0x000000FF;
1438	unsigned int channel = entry>>16;
1439	if ( (isr == ISR_TIMER) && (channel == alloc_tim_channel[cluster_id]) )
1440	{
1441	found = 1;
1442	ctx_tim = alloc_tim_channel[cluster_id];
1443	alloc_tim_channel[cluster_id]++;
1444	break;
1445	}
1446	}
1447	if (!found)
1448	{
1449	_puts("\n[BOOT ERROR] No ISR_TIMER installed for task ");
1450	_puts(task[task_id].name);
1451	_puts(" in vspace ");
1452	_puts(vspace[vspace_id].name);
1453	_puts("\n");
1454	_exit();
1455	}
1456	}
1457	// ctx_epc : Get the virtual address of the memory location containing
1458	// the task entry point : the start_vector is stored by GCC in the seg_data
1459	// segment and we must wait the .elf loading to get the entry point value...
1460	mapping_vobj_t* pvobj = &vobj[vspace[vspace_id].vobj_offset +
1461	vspace[vspace_id].start_offset];
1462	unsigned int ctx_epc = pvobj->vaddr + (task[task_id].startid)*4;
1463
1464	// ctx_sp : Get the vobj containing the stack
1465	unsigned int vobj_id = task[task_id].stack_vobjid + vspace[vspace_id].vobj_offset;
1466	unsigned int ctx_sp = vobj[vobj_id].vaddr + vobj[vobj_id].length;
1467
1468	// get local task index in scheduler
1469	unsigned int ltid = psched->tasks;
1470
1471	if (ltid >= IDLE_TASK_INDEX)
1472	{
1473	_puts("\n[BOOT ERROR] in boot_schedulers_init() : ");
1474	_putd( ltid );
1475	_puts(" tasks allocated to processor ");
1476	_putd( gpid );
1477	_puts(" / max is ");
1478	_putd( IDLE_TASK_INDEX );
1479	_puts("\n");
1480	_exit();
1481	}
1482
1483	// update the "tasks" and "current" fields in scheduler:
1484	// the first task to execute is task 0 as soon as there is at least
1485	// one task allocated to processor.
1486	psched->tasks = ltid + 1;
1487	psched->current = 0;
1488
1489	// initializes the task context in scheduler
1490	psched->context[ltid][CTX_SR_ID] = ctx_sr;
1491	psched->context[ltid][CTX_SP_ID] = ctx_sp;
1492	psched->context[ltid][CTX_EPC_ID] = ctx_epc;
1493	psched->context[ltid][CTX_PTPR_ID] = ctx_ptpr;
1494	psched->context[ltid][CTX_TTY_ID] = ctx_tty;
1495	psched->context[ltid][CTX_CMA_ID] = ctx_cma;
1496	psched->context[ltid][CTX_HBA_ID] = ctx_hba;
1497	psched->context[ltid][CTX_NIC_ID] = ctx_nic;
1498	psched->context[ltid][CTX_TIM_ID] = ctx_tim;
1499	psched->context[ltid][CTX_PTAB_ID] = ctx_ptab;
1500	psched->context[ltid][CTX_LTID_ID] = ltid;
1501	psched->context[ltid][CTX_GTID_ID] = task_id;
1502	psched->context[ltid][CTX_VSID_ID] = vspace_id;
1503	psched->context[ltid][CTX_RUN_ID] = 1;
1504
1505	#if BOOT_DEBUG_SCHED
1506	_puts("\nTask ");
1507	_puts( task[task_id].name );
1508	_puts(" (");
1509	_putd( task_id );
1510	_puts(") allocated to processor ");
1511	_putd( gpid );
1512	_puts("\n - ctx[LTID] = ");
1513	_putd( psched->context[ltid][CTX_LTID_ID] );
1514	_puts("\n - ctx[SR] = ");
1515	_putx( psched->context[ltid][CTX_SR_ID] );
1516	_puts("\n - ctx[SP] = ");
1517	_putx( psched->context[ltid][CTX_SP_ID] );
1518	_puts("\n - ctx[EPC] = ");
1519	_putx( psched->context[ltid][CTX_EPC_ID] );
1520	_puts("\n - ctx[PTPR] = ");
1521	_putx( psched->context[ltid][CTX_PTPR_ID] );
1522	_puts("\n - ctx[TTY] = ");
1523	_putd( psched->context[ltid][CTX_TTY_ID] );
1524	_puts("\n - ctx[NIC] = ");
1525	_putd( psched->context[ltid][CTX_NIC_ID] );
1526	_puts("\n - ctx[CMA] = ");
1527	_putd( psched->context[ltid][CTX_CMA_ID] );
1528	_puts("\n - ctx[IOC] = ");
1529	_putd( psched->context[ltid][CTX_HBA_ID] );
1530	_puts("\n - ctx[TIM] = ");
1531	_putd( psched->context[ltid][CTX_TIM_ID] );
1532	_puts("\n - ctx[PTAB] = ");
1533	_putx( psched->context[ltid][CTX_PTAB_ID] );
1534	_puts("\n - ctx[GTID] = ");
1535	_putd( psched->context[ltid][CTX_GTID_ID] );
1536	_puts("\n - ctx[VSID] = ");
1537	_putd( psched->context[ltid][CTX_VSID_ID] );
1538	_puts("\n");
1539	#endif
1540
1541	} // end loop on tasks
1542	} // end loop on vspaces
1543	} // end _schedulers_init()
1544
1545	//////////////////////////////////////////////////////////////////////////////////
1546	// This function loads the map.bin file from block device.
1547	// The fat global varible is defined in fat32.c file.
1548	//////////////////////////////////////////////////////////////////////////////////
1549	void boot_mapping_init()
1550	{
1551	// Initializing the FAT descriptor and files descriptor array
1552	if ( _fat_init( IOC_BOOT_PA_MODE ) )
1553	{
1554	_puts("[BOOT ERROR] Cannot initialize FAT descriptor fom Boot Sector\n");
1555	_exit();
1556	}
1557
1558	#if BOOT_DEBUG_MAPPING
1559	_puts("\n[BOOT] FAT initialisation completed at cycle ");
1560	_putd(_get_proctime());
1561	_puts("\n");
1562	_fat_print();
1563	#endif
1564
1565	int fd_id = _fat_open( IOC_BOOT_PA_MODE,
1566	"map.bin",
1567	0 ); // no creation
1568
1569	if ( fd_id == -1 )
1570	{
1571	_puts("\n[BOOT ERROR] : map.bin file not found \n");
1572	_exit();
1573	}
1574
1575	#if BOOT_DEBUG_MAPPING
1576	_puts("\n[BOOT] map.bin file successfully open at cycle ");
1577	_putd(_get_proctime());
1578	_puts("\n");
1579	#endif
1580
1581	unsigned int size = fat.fd[fd_id].file_size;
1582	unsigned int nblocks = size >> 9;
1583	unsigned int offset = size & 0x1FF;
1584	if ( offset ) nblocks++;
1585
1586	unsigned int ok = _fat_read( IOC_BOOT_PA_MODE,
1587	fd_id,
1588	(unsigned int*)( &seg_boot_mapping_base),
1589	nblocks,
1590	0 ); // offset
1591	if ( ok == -1 )
1592	{
1593	_puts("\n[BOOT ERROR] : unable to load map.bin file \n");
1594	_exit();
1595	}
1596	_fat_close( fd_id );
1597
1598	boot_mapping_check();
1599	} // end boot_mapping_init()
1600
1601
1602	//////////////////////////////////////////////////////////////////////////////////
1603	// This function open the .elf file identified by the "pathname" argument.
1604	// It loads the complete file in a dedicated buffer, it copies all loadable
1605	// segments at the memory virtual address defined in the .elf file,
1606	// and close the file.
1607	// Notes:
1608	// - The processor PTPR should contain the value corresponding to the
1609	// vspace containing the .elf file.
1610	// - As this function requires a temporary memory buffer
1611	// to load the complete .elf file before to copy the various segments
1612	// to te proper location, it uses the seg_boot_buffer defined in map.xml.
1613	//////////////////////////////////////////////////////////////////////////////////
1614	void load_one_elf_file( unsigned int mode,
1615	char* pathname,
1616	unsigned int vspace_id ) // to use the proper page_table
1617	{
1618	unsigned int seg_id;
1619
1620	// get boot buffer address and size
1621	char* boot_buffer = (char*)(&seg_boot_buffer_base);
1622	unsigned int boot_buffer_size = (unsigned int)(&seg_boot_buffer_size);
1623
1624	#if BOOT_DEBUG_ELF
1625	_puts("\n[BOOT DEBUG] Start searching file ");
1626	_puts( pathname );
1627	_puts(" at cycle ");
1628	_putd( _get_proctime() );
1629	_puts("\n");
1630	#endif
1631
1632	// open .elf file
1633	int fd_id = _fat_open( mode,
1634	pathname,
1635	0 ); // no creation
1636	if ( fd_id < 0 )
1637	{
1638	_puts("\n[BOOT ERROR] load_one_elf_file() : ");
1639	_puts( pathname );
1640	_puts(" not found\n");
1641	_exit();
1642	}
1643
1644	// check boot_buffer size versus file size
1645	if ( fat.fd[fd_id].file_size > boot_buffer_size )
1646	{
1647	_puts("\n[BOOT ERROR] load_one_elf_file() : ");
1648	_puts( pathname );
1649	_puts(" exceeds the seg_boot_buffer size\n");
1650	_exit();
1651	}
1652
1653	// compute number of sectors
1654	unsigned int nbytes = fat.fd[fd_id].file_size;
1655	unsigned int nsectors = nbytes>>9;
1656	if( nbytes & 0x1FF) nsectors++;
1657
1658	// load file in boot_buffer
1659	if( _fat_read( mode,
1660	fd_id,
1661	boot_buffer,
1662	nsectors,
1663	0 ) != nsectors )
1664	{
1665	_puts("\n[BOOT ERROR] load_one_elf_file() : unexpected EOF for file ");
1666	_puts( pathname );
1667	_puts("\n");
1668	_exit();
1669	}
1670
1671	// Check ELF Magic Number in ELF header
1672	Elf32_Ehdr* elf_header_ptr = (Elf32_Ehdr*)boot_buffer;
1673
1674	if ( (elf_header_ptr->e_ident[EI_MAG0] != ELFMAG0) \|\|
1675	(elf_header_ptr->e_ident[EI_MAG1] != ELFMAG1) \|\|
1676	(elf_header_ptr->e_ident[EI_MAG2] != ELFMAG2) \|\|
1677	(elf_header_ptr->e_ident[EI_MAG3] != ELFMAG3) )
1678	{
1679	_puts("\n[BOOT ERROR] load_elf() : file ");
1680	_puts( pathname );
1681	_puts(" does not use ELF format\n");
1682	_exit();
1683	}
1684
1685	// get program header table pointer
1686	unsigned int pht_index = elf_header_ptr->e_phoff;
1687	if( pht_index == 0 )
1688	{
1689	_puts("\n[BOOT ERROR] load_one_elf_file() : file ");
1690	_puts( pathname );
1691	_puts(" does not contain loadable segment\n");
1692	_exit();
1693	}
1694	Elf32_Phdr* elf_pht_ptr = (Elf32_Phdr*)(boot_buffer + pht_index);
1695
1696	// get number of segments
1697	unsigned int nsegments = elf_header_ptr->e_phnum;
1698
1699	#if BOOT_DEBUG_ELF
1700	_puts("\n[BOOT DEBUG] File ");
1701	_puts( pathname );
1702	_puts(" loaded at cycle ");
1703	_putd( _get_proctime() );
1704	_puts(" / bytes = ");
1705	_putd( nbytes );
1706	_puts(" / sectors = ");
1707	_putd( nsectors );
1708	_puts("\n");
1709	#endif
1710
1711	// Loop on loadable segments in the ELF file
1712	for (seg_id = 0 ; seg_id < nsegments ; seg_id++)
1713	{
1714	if(elf_pht_ptr[seg_id].p_type == PT_LOAD)
1715	{
1716	// Get segment attributes
1717	unsigned int seg_vaddr = elf_pht_ptr[seg_id].p_vaddr;
1718	unsigned int seg_offset = elf_pht_ptr[seg_id].p_offset;
1719	unsigned int seg_filesz = elf_pht_ptr[seg_id].p_filesz;
1720	unsigned int seg_memsz = elf_pht_ptr[seg_id].p_memsz;
1721
1722	if( seg_memsz < seg_filesz )
1723	{
1724	_puts("\n[BOOT ERROR] load_one_elf_file() : segment at vaddr = ");
1725	_putx( seg_vaddr );
1726	_puts(" in file ");
1727	_puts( pathname );
1728	_puts(" has a wrong size \n");
1729	_exit();
1730	}
1731
1732	// fill empty space with 0 as required
1733	if( seg_memsz > seg_filesz )
1734	{
1735	unsigned int i;
1736	for( i = seg_filesz ; i < seg_memsz; i++ ) boot_buffer[i] = 0;
1737	}
1738
1739	unsigned int src_vaddr = (unsigned int)boot_buffer + seg_offset;
1740
1741	#if BOOT_DEBUG_ELF
1742	_puts(" - segment ");
1743	_putd( seg_id );
1744	_puts(" / dst_vaddr = ");
1745	_putx( seg_vaddr );
1746	_puts(" / src_vaddr = ");
1747	_putx( src_vaddr );
1748	_puts(" / size = ");
1749	_putx( seg_filesz );
1750	_puts("\n");
1751	#endif
1752
1753	// copy the segment from boot buffer to destination buffer
1754	if( NB_DMA_CHANNELS > 0 )
1755	{
1756	_dma_copy( vspace_id, // required for V2P translation
1757	(char*)seg_vaddr,
1758	(char*)src_vaddr,
1759	seg_filesz );
1760	}
1761	else
1762	{
1763	_memcpy( (char*)seg_vaddr,
1764	(char*)src_vaddr,
1765	seg_filesz );
1766	}
1767	}
1768	} // end for segments
1769
1770	// close .elf file
1771	_fat_close( fd_id );
1772
1773	} // end load_one_elf_file()
1774
1775
1776	//////////////////////////////////////////////////////////////////////////////////
1777	// This function uses the map.bin data structure to load the "kernel.elf" file
1778	// as well as the various "application.elf" files.
1779	// The "preloader.elf" file is not loaded, because it has been burned in the ROM.
1780	// The "boot.elf" file is not loaded, because it has been loaded by the preloader.
1781	// It scans all vobjs defined in the map.bin data structure to collect
1782	// all .elf files pathnames, and calls the load_one_elf_file() function to
1783	// load all loadable segments at the virtual address found in the .elf file.
1784	//////////////////////////////////////////////////////////////////////////////////
1785	void boot_elf_load()
1786	{
1787	mapping_header_t* header = (mapping_header_t *) & seg_boot_mapping_base;
1788	mapping_vspace_t* vspace = _get_vspace_base( header );
1789	mapping_vobj_t* vobj = _get_vobj_base( header );
1790	unsigned int vspace_id;
1791	unsigned int vobj_id;
1792	unsigned int found;
1793
1794	// Scan all vobjs corresponding to global vsegs,
1795	// to find the pathname to the kernel.elf file
1796	found = 0;
1797	for( vobj_id = 0 ; vobj_id < header->globals ; vobj_id++ )
1798	{
1799	if(vobj[vobj_id].type == VOBJ_TYPE_ELF)
1800	{
1801	found = 1;
1802	break;
1803	}
1804	}
1805
1806	// We need one kernel.elf file
1807	if (found == 0)
1808	{
1809	_puts("[BOOT ERROR] boot_elf_load() : kernel.elf file not found\n");
1810	_exit();
1811	}
1812
1813	load_one_elf_file( IOC_BOOT_VA_MODE,
1814	vobj[vobj_id].binpath,
1815	0 ); // vspace 0
1816
1817	_puts("\n[BOOT] File ");
1818	_puts( vobj[vobj_id].binpath );
1819	_puts(" loaded at cycle ");
1820	_putd( _get_proctime() );
1821	_puts("\n");
1822
1823	// loop on the vspaces, scanning all vobjs in a vspace,
1824	// to find the pathname of the .elf file associated to the vspace.
1825	for( vspace_id = 0 ; vspace_id < header->vspaces ; vspace_id++ )
1826	{
1827	// Set PTPR depending on the vspace, as seg_data is defined in virtual space.
1828	_set_mmu_ptpr( (unsigned int)(_ptabs_paddr[vspace_id] >> 13) );
1829
1830	// loop on the vobjs in vspace (vobj_id is the global index)
1831	unsigned int found = 0;
1832	for (vobj_id = vspace[vspace_id].vobj_offset;
1833	vobj_id < (vspace[vspace_id].vobj_offset + vspace[vspace_id].vobjs);
1834	vobj_id++)
1835	{
1836	if(vobj[vobj_id].type == VOBJ_TYPE_ELF)
1837	{
1838	found = 1;
1839	break;
1840	}
1841	}
1842
1843	// We want one .elf file per vspace
1844	if (found == 0)
1845	{
1846	_puts("[BOOT ERROR] boot_elf_load() : .elf file not found for vspace ");
1847	_puts( vspace[vspace_id].name );
1848	_puts("\n");
1849	_exit();
1850	}
1851
1852	load_one_elf_file( IOC_BOOT_VA_MODE,
1853	vobj[vobj_id].binpath,
1854	vspace_id );
1855
1856	_puts("\n[BOOT] File ");
1857	_puts( vobj[vobj_id].binpath );
1858	_puts(" loaded at cycle ");
1859	_putd( _get_proctime() );
1860	_puts("\n");
1861
1862	} // end for vspaces
1863
1864	// restaure vspace 0 PTPR
1865	_set_mmu_ptpr( (unsigned int)(_ptabs_paddr[0] >> 13) );
1866
1867	} // end boot_elf_load()
1868
1869	////////////////////////////////////////////////////////////////////////////////
1870	// This function intializes the periherals and coprocessors, as specified
1871	// in the mapping_info file.
1872	////////////////////////////////////////////////////////////////////////////////
1873	void boot_peripherals_init()
1874	{
1875	mapping_header_t * header = (mapping_header_t *) & seg_boot_mapping_base;
1876	mapping_cluster_t * cluster = _get_cluster_base(header);
1877	mapping_periph_t * periph = _get_periph_base(header);
1878	mapping_vobj_t * vobj = _get_vobj_base(header);
1879	mapping_vspace_t * vspace = _get_vspace_base(header);
1880	mapping_coproc_t * coproc = _get_coproc_base(header);
1881	mapping_cp_port_t * cp_port = _get_cp_port_base(header);
1882
1883	unsigned int cluster_id;
1884	unsigned int periph_id;
1885	unsigned int coproc_id;
1886	unsigned int cp_port_id;
1887	unsigned int channel_id;
1888
1889	// loop on all physical clusters
1890	for (cluster_id = 0; cluster_id < X_SIZE*Y_SIZE; cluster_id++)
1891	{
1892	// computes cluster coordinates
1893	unsigned int x = cluster[cluster_id].x;
1894	unsigned int y = cluster[cluster_id].y;
1895	unsigned int cluster_xy = (x<<Y_WIDTH) + y;
1896
1897	#if BOOT_DEBUG_PERI
1898	_puts("\n[BOOT DEBUG] ****** peripherals initialisation in cluster[");
1899	_putd( x );
1900	_puts(",");
1901	_putd( y );
1902	_puts("] ******\n");
1903	#endif
1904
1905	// loop on peripherals
1906	for (periph_id = cluster[cluster_id].periph_offset;
1907	periph_id < cluster[cluster_id].periph_offset +
1908	cluster[cluster_id].periphs; periph_id++)
1909	{
1910	unsigned int type = periph[periph_id].type;
1911	unsigned int channels = periph[periph_id].channels;
1912
1913	switch (type)
1914	{
1915	case PERIPH_TYPE_IOC: // vci_block_device component
1916	{
1917	_ioc_init();
1918	#if BOOT_DEBUG_PERI
1919	_puts("- IOC / channels = ");
1920	_putd(channels);
1921	_puts("\n");
1922	#endif
1923	break;
1924	}
1925	case PERIPH_TYPE_DMA: // vci_multi_dma component
1926	{
1927	for (channel_id = 0; channel_id < channels; channel_id++)
1928	{
1929	_dma_init( cluster_xy, channel_id );
1930	}
1931	#if BOOT_DEBUG_PERI
1932	_puts("- DMA / channels = ");
1933	_putd(channels);
1934	_puts("\n");
1935	#endif
1936	break;
1937	}
1938	case PERIPH_TYPE_FBF: // vci_block_device component
1939	{
1940	// nothing to do
1941	#if BOOT_DEBUG_PERI
1942	_puts("- FBF / channels = ");
1943	_putd(channels);
1944	_puts("\n");
1945	#endif
1946	break;
1947	}
1948	case PERIPH_TYPE_HBA: // vci_multi_ahci component
1949	{
1950	for (channel_id = 0; channel_id < channels; channel_id++)
1951	{
1952	// TODO
1953	}
1954	#if BOOT_DEBUG_PERI
1955	_puts("- HBA / channels = ");
1956	_putd(channels);
1957	_puts("\n");
1958	#endif
1959	break;
1960	}
1961	case PERIPH_TYPE_CMA: // vci_chbuf_dma component
1962	{
1963	for (channel_id = 0; channel_id < channels; channel_id++)
1964	{
1965	// TODO
1966	}
1967	#if BOOT_DEBUG_PERI
1968	_puts("- CMA / channels = ");
1969	_putd(channels);
1970	_puts("\n");
1971	#endif
1972	break;
1973	}
1974	case PERIPH_TYPE_NIC: // vci_multi_nic component
1975	{
1976	for (channel_id = 0; channel_id < channels; channel_id++)
1977	{
1978	// TODO
1979	}
1980	#if BOOT_DEBUG_PERI
1981	_puts("- NIC / channels = ");
1982	_putd(channels);
1983	_puts("\n");
1984	#endif
1985	break;
1986	}
1987	case PERIPH_TYPE_XCU: // vci_xicu component
1988	{
1989	// nothing to do
1990	#if BOOT_DEBUG_PERI
1991	_puts("- XCU / channels = ");
1992	_putd(channels);
1993	_puts("\n");
1994	#endif
1995	break;
1996	}
1997	case PERIPH_TYPE_MMC: // vci_memcache config
1998	{
1999	// nothing to do
2000	#if BOOT_DEBUG_PERI
2001	_puts("- MMC / channels = ");
2002	_putd(channels);
2003	_puts("\n");
2004	#endif
2005	break;
2006	}
2007	case PERIPH_TYPE_TTY: // vci_multi_tty component
2008	{
2009	#if BOOT_DEBUG_PERI
2010	_puts("- TTY / channels = ");
2011	_putd(channels);
2012	_puts("\n");
2013	#endif
2014	break;
2015	}
2016	case PERIPH_TYPE_IOB: // vci_io_bridge component
2017	{
2018	if (USE_IOB)
2019	{
2020	// TODO
2021	// get the iommu page table physical address
2022	// define IPI address mapping the IOC interrupt
2023	// set IOMMU page table address
2024	// pseg_base[IOB_IOMMU_PTPR] = ptab_pbase;
2025	// activate IOMMU
2026	// pseg_base[IOB_IOMMU_ACTIVE] = 1;
2027	}
2028	#if BOOT_DEBUG_PERI
2029	_puts("- IOB / channels = ");
2030	_putd(channels);
2031	_puts("\n");
2032	#endif
2033	break;
2034	}
2035	} // end switch periph type
2036	} // end for periphs
2037
2038	#if BOOT_DEBUG_PERI
2039	_puts("\n[BOOT DEBUG] ****** coprocessors initialisation in cluster[");
2040	_putd( x );
2041	_puts(",");
2042	_putd( y );
2043	_puts("] ******\n");
2044	#endif
2045
2046	// loop on coprocessors
2047	for ( coproc_id = cluster[cluster_id].coproc_offset;
2048	coproc_id < cluster[cluster_id].coproc_offset +
2049	cluster[cluster_id].coprocs; coproc_id++ )
2050	{
2051
2052	#if BOOT_DEBUG_PERI
2053	_puts("- coprocessor name : ");
2054	_puts(coproc[coproc_id].name);
2055	_puts(" / nb ports = ");
2056	_putd((unsigned int) coproc[coproc_id].ports);
2057	_puts("\n");
2058	#endif
2059	// loop on the coprocessor ports
2060	for ( cp_port_id = coproc[coproc_id].port_offset;
2061	cp_port_id < coproc[coproc_id].port_offset + coproc[coproc_id].ports;
2062	cp_port_id++ )
2063	{
2064	unsigned int vspace_id = cp_port[cp_port_id].vspaceid;
2065	unsigned int vobj_id = cp_port[cp_port_id].mwmr_vobjid +
2066	vspace[vspace_id].vobj_offset;
2067
2068	// Get MWMR channel base address
2069	paddr_t mwmr_channel_pbase = vobj[vobj_id].paddr;
2070
2071	_mwr_hw_init( cluster_xy,
2072	cp_port_id,
2073	cp_port[cp_port_id].direction,
2074	mwmr_channel_pbase );
2075	#if BOOT_DEBUG_PERI
2076	_puts(" port direction: ");
2077	_putd( (unsigned int)cp_port[cp_port_id].direction );
2078	_puts(" / mwmr_channel_pbase = ");
2079	_putl( mwmr_channel_pbase );
2080	_puts(" / name = ");
2081	_puts(vobj[vobj_id].name);
2082	_puts(" / in vspace ");
2083	_puts(vspace[vspace_id].name);
2084	_puts("\n");
2085	#endif
2086	} // end for cp_ports
2087	} // end for coprocs
2088	} // end for clusters
2089	} // end boot_peripherals_init()
2090
2091	/////////////////////////////////////////////////////////////////////////
2092	// This function is the entry point of the boot code for all processors.
2093	// Most of this code is executed by Processor 0 only.
2094	/////////////////////////////////////////////////////////////////////////
2095	void boot_init()
2096	{
2097	mapping_header_t* header = (mapping_header_t *) & seg_boot_mapping_base;
2098	unsigned int gpid = _get_procid();
2099	unsigned int cluster_xy = gpid / NB_PROCS_MAX;
2100	unsigned int lpid = gpid % NB_PROCS_MAX;
2101
2102	if ( gpid == 0 ) // only Processor 0 does it
2103	{
2104	_puts("\n[BOOT] boot_init start at cycle ");
2105	_putd(_get_proctime());
2106	_puts("\n");
2107
2108	// Loading the map.bin file into memory and checking it
2109	boot_mapping_init();
2110
2111	_puts("\n[BOOT] Mapping ");
2112	_puts( header->name );
2113	_puts(" loaded at cycle ");
2114	_putd(_get_proctime());
2115	_puts("\n");
2116
2117	// Building all page tables
2118	boot_pt_init();
2119
2120	_puts("\n[BOOT] Page Tables initialisation completed at cycle ");
2121	_putd(_get_proctime());
2122	_puts("\n");
2123
2124	// Activating proc 0 MMU
2125	_set_mmu_ptpr( (unsigned int)(_ptabs_paddr[0]>>13) );
2126	_set_mmu_mode( 0xF );
2127
2128	_puts("\n[BOOT] Processor[0,0,0] : MMU activation at cycle ");
2129	_putd(_get_proctime());
2130	_puts("\n");
2131
2132	// Initialising private vobjs in vspaces
2133	boot_vobjs_init();
2134
2135	_puts("\n[BOOT] Private vobjs initialised at cycle ");
2136	_putd(_get_proctime());
2137	_puts("\n");
2138
2139	// Initializing schedulers
2140	boot_schedulers_init();
2141
2142	_puts("\n[BOOT] All schedulers initialised at cycle ");
2143	_putd(_get_proctime());
2144	_puts("\n");
2145
2146	// Setting CP0_SCHED register for proc 0
2147	_set_sched( (unsigned int)_schedulers[0] );
2148
2149	// Initializing peripherals
2150	boot_peripherals_init();
2151
2152	_puts("\n[BOOT] All peripherals initialised at cycle ");
2153	_putd(_get_proctime());
2154	_puts("\n");
2155
2156	// Loading all .elf files
2157	boot_elf_load();
2158
2159	_puts("\n[BOOT] All ELF files loaded at cycle ");
2160	_putd(_get_proctime());
2161	_puts("\n");
2162
2163	// P0 starts all other processors
2164	unsigned int x,y,p;
2165	for (x = 0 ; x < X_SIZE ; x++)
2166	{
2167	for (y = 0 ; y < Y_SIZE ; y++)
2168	{
2169	for(p = 0; p < NB_PROCS_MAX; p++)
2170	{
2171	if ( (x != 0) \|\| (y != 0) \|\| (p != 0) )
2172	{
2173	_xcu_send_ipi( (x<<Y_WIDTH) + y,
2174	p,
2175	(unsigned int)boot_init );
2176	}
2177	}
2178	}
2179	}
2180	} // end monoprocessor boot
2181
2182	// reset BEV bit in the status register to use GIET exception
2183	// handler instead of the PRELOADER exception handler
2184	_set_sr( 0 );
2185
2186	// all processor initialise SCHED register
2187	_set_sched( (unsigned int)_schedulers[gpid] );
2188
2189	// all processors (but Proc 0) activate MMU
2190	if ( gpid != 0 )
2191	{
2192	_set_mmu_ptpr( (unsigned int)(_ptabs_paddr[0]>>13) );
2193	_set_mmu_mode( 0xF );
2194
2195	_tty_get_lock( 0 );
2196	_puts("\n[BOOT] Processor[");
2197	_putd( cluster_xy >> Y_WIDTH );
2198	_puts(",");
2199	_putd( cluster_xy & ((1<<Y_WIDTH)-1) );
2200	_puts(",");
2201	_putd( lpid );
2202	_puts("] : MMU activation at cycle ");
2203	_putd(_get_proctime());
2204	_puts("\n");
2205	_tty_release_lock( 0 );
2206	}
2207
2208	// all processors jump to kernel_init
2209	unsigned int kernel_entry = (unsigned int)&seg_kernel_init_base;
2210
2211	_tty_get_lock( 0 );
2212	_puts("\n[BOOT] Processor[");
2213	_putd( cluster_xy >> Y_WIDTH );
2214	_puts(",");
2215	_putd( cluster_xy & ((1<<Y_WIDTH)-1) );
2216	_puts(",");
2217	_putd( lpid );
2218	_puts("] enters kernel at cycle ");
2219	_putd( _get_proctime() );
2220	_puts(" / kernel entry = ");
2221	_putx( kernel_entry );
2222	_puts("\n");
2223	_tty_release_lock( 0 );
2224
2225	asm volatile( "jr %0" ::"r"(kernel_entry) );
2226
2227	} // end boot_init()
2228
2229
2230	// Local Variables:
2231	// tab-width: 4
2232	// c-basic-offset: 4
2233	// c-file-offsets:((innamespace . 0)(inline-open . 0))
2234	// indent-tabs-mode: nil
2235	// End:
2236	// vim: filetype=c:expandtab:shiftwidth=4:tabstop=4:softtabstop=4
2237

Note: See TracBrowser for help on using the repository browser.

Download in other formats: