Context Navigation

boot.c @ 819

Last change on this file since 819 was 819, checked in by cfuguet, 8 years ago
Add a preprocessor flag which allows to inhibit the use of the GLOBAL bit in page table entries.
File size: 72.1 KB

Line
1	///////////////////////////////////////////////////////////////////////////////////
2	// File : boot.c
3	// Date : 01/11/2013
4	// Author : alain greiner
5	// Copyright (c) UPMC-LIP6
6	///////////////////////////////////////////////////////////////////////////////////
7	// The boot.c file contains the bootloader for the GIET-VM static OS.
8	//
9	// This code has been written for the MIPS32 processor.
10	// The virtual adresses are on 32 bits and use the (unsigned int) type. The
11	// physicals addresses can have up to 40 bits, and use type (unsigned long long).
12	// It natively supports clusterised shared memory multi-processors architectures,
13	// where each processor is identified by a composite index [x,y,p],
14	// and where there is one physical memory bank per cluster.
15	//
16	// The boot.elf file is stored on disk and is loaded into memory by proc[0,0,0],
17	// executing the generic preloader (stored in ROM). The boot-loader code itself
18	// is executed in parallel by all proc[x,y,0], and performs the following tasks:
19	// - load into memory various binary files, from a FAT32 file system.
20	// - build the various page tables (one page table per vspace).
21	// - initialize the shedulers (one scheduler per processor).
22	//
23	// 1) The binary files to be loaded are:
24	// - the "map.bin" file contains the hardware architecture description,
25	// the set of user applications that will be mapped on the architecture,
26	// and the mapping directives. The mapping includes the placement of threads
27	// on processors, and the placement of virtual segments on the physical
28	// segments. It is stored in the the seg_boot_mapping segment
29	// (at address SEG_BOOT_MAPPING_BASE defined in hard_config.h file).
30	// - the "kernel.elf" file contains the kernel binary code and data.
31	// - the various "application.elf" files.
32	//
33	// 2) The GIET-VM uses the paged virtual memory to provide two services:
34	// - classical memory protection, when several independant applications compiled
35	// in different virtual spaces are executing on the same hardware platform.
36	// - data placement in NUMA architectures, to control the placement
37	// of the software objects (vsegs) on the physical memory banks (psegs).
38	// The max number of vspaces (GIET_NB_VSPACE_MAX) is a configuration parameter.
39	// The page tables are statically build in the boot phase, and they do not
40	// change during execution.
41	// For each application, the page tables are replicated in all clusters.
42	// The GIET_VM uses both small pages (4 Kbytes), and big pages (2 Mbytes).
43	// Each page table (one page table per virtual space) is monolithic, and
44	// contains one PT1 (8 Kbytes) and a variable number of PT2s (4 Kbytes each).
45	// For each vspace, the max number of PT2s is defined by the size of the PTAB
46	// vseg in the mapping.
47	// The PT1 is indexed by the ix1 field (11 bits) of the VPN. An entry is 32 bits.
48	// A PT2 is indexed the ix2 field (9 bits) of the VPN. An entry is 64 bits.
49	// The first word contains the flags, the second word contains the PPN.
50	//
51	// 3) The Giet-VM implement one private scheduler per processor.
52	// For each application, the threads are statically allocated to processors
53	// and there is no thread migration during execution.
54	// Each sheduler occupies 8K bytes, and contains up to 14 thread contexts
55	// The thread context [13] is reserved for the "idle" thread that does nothing,
56	// and is launched by the scheduler when there is no other runable thread.
57	///////////////////////////////////////////////////////////////////////////////////
58	// Implementation Notes:
59	//
60	// 1) The cluster_id variable is a linear index in the mapping_info array.
61	// The cluster_xy variable is the tological index = x << Y_WIDTH + y
62	//
63	// 2) We set the _tty0_boot_mode variable to force the _printf() function to use
64	// the tty0_spin_lock for exclusive access to TTY0.
65	///////////////////////////////////////////////////////////////////////////////////
66
67	#include <giet_config.h>
68	#include <hard_config.h>
69	#include <mapping_info.h>
70	#include <kernel_malloc.h>
71	#include <memspace.h>
72	#include <tty_driver.h>
73	#include <xcu_driver.h>
74	#include <bdv_driver.h>
75	#include <hba_driver.h>
76	#include <sdc_driver.h>
77	#include <cma_driver.h>
78	#include <nic_driver.h>
79	#include <iob_driver.h>
80	#include <pic_driver.h>
81	#include <mwr_driver.h>
82	#include <dma_driver.h>
83	#include <mmc_driver.h>
84	#include <ctx_handler.h>
85	#include <irq_handler.h>
86	#include <vmem.h>
87	#include <pmem.h>
88	#include <utils.h>
89	#include <tty0.h>
90	#include <kernel_locks.h>
91	#include <kernel_barriers.h>
92	#include <elf-types.h>
93	#include <fat32.h>
94	#include <mips32_registers.h>
95	#include <stdarg.h>
96
97	#if !defined(X_SIZE)
98	# error: The X_SIZE value must be defined in the 'hard_config.h' file !
99	#endif
100
101	#if !defined(Y_SIZE)
102	# error: The Y_SIZE value must be defined in the 'hard_config.h' file !
103	#endif
104
105	#if !defined(X_WIDTH)
106	# error: The X_WIDTH value must be defined in the 'hard_config.h' file !
107	#endif
108
109	#if !defined(Y_WIDTH)
110	# error: The Y_WIDTH value must be defined in the 'hard_config.h' file !
111	#endif
112
113	#if !defined(SEG_BOOT_MAPPING_BASE)
114	# error: The SEG_BOOT_MAPPING_BASE value must be defined in the hard_config.h file !
115	#endif
116
117	#if !defined(NB_PROCS_MAX)
118	# error: The NB_PROCS_MAX value must be defined in the 'hard_config.h' file !
119	#endif
120
121	#if !defined(GIET_NB_VSPACE_MAX)
122	# error: The GIET_NB_VSPACE_MAX value must be defined in the 'giet_config.h' file !
123	#endif
124
125	#if !defined(GIET_ELF_BUFFER_SIZE)
126	# error: The GIET_ELF_BUFFER_SIZE value must be defined in the giet_config.h file !
127	#endif
128
129	////////////////////////////////////////////////////////////////////////////
130	// Global variables for boot code
131	////////////////////////////////////////////////////////////////////////////
132
133	// Temporaty buffer used to load one complete .elf file
134	__attribute__((section(".kdata")))
135	unsigned char _boot_elf_buffer[GIET_ELF_BUFFER_SIZE] __attribute__((aligned(64)));
136
137	// Physical memory allocators array (one per cluster)
138	__attribute__((section(".kdata")))
139	pmem_alloc_t _boot_pmem_alloc[X_SIZE][Y_SIZE];
140
141	// Schedulers virtual base addresses array (one per processor)
142	__attribute__((section(".kdata")))
143	static_scheduler_t* _schedulers[X_SIZE][Y_SIZE][NB_PROCS_MAX];
144
145	// Page tables virtual base addresses (one per vspace and per cluster)
146	__attribute__((section(".kdata")))
147	unsigned int _ptabs_vaddr[GIET_NB_VSPACE_MAX][X_SIZE][Y_SIZE];
148
149	// Page tables physical base addresses (one per vspace and per cluster)
150	__attribute__((section(".kdata")))
151	unsigned long long _ptabs_paddr[GIET_NB_VSPACE_MAX][X_SIZE][Y_SIZE];
152
153	// Page tables pt2 allocators (one per vspace and per cluster)
154	__attribute__((section(".kdata")))
155	unsigned int _ptabs_next_pt2[GIET_NB_VSPACE_MAX][X_SIZE][Y_SIZE];
156
157	// Page tables max_pt2 (same value for all page tables)
158	__attribute__((section(".kdata")))
159	unsigned int _ptabs_max_pt2;
160
161	// boot code uses a spin lock to protect TTY0
162	__attribute__((section(".kdata")))
163	unsigned int _tty0_boot_mode = 1;
164
165	// boot code does not uses a lock to protect HBA command list
166	__attribute__((section(".kdata")))
167	unsigned int _hba_boot_mode = 1;
168
169	// required for concurrent PTAB building
170	__attribute__((section(".kdata")))
171	spin_lock_t _ptabs_spin_lock[GIET_NB_VSPACE_MAX][X_SIZE][Y_SIZE];
172
173	// barrier used by boot code for parallel execution
174	__attribute__((section(".kdata")))
175	simple_barrier_t _barrier_all_clusters;
176
177	//////////////////////////////////////////////////////////////////////////////
178	// Extern variables
179	//////////////////////////////////////////////////////////////////////////////
180
181	// this variable is allocated in the tty0.c file
182	extern spin_lock_t _tty0_spin_lock;
183
184	// this variable is allocated in the mmc_driver.c
185	extern unsigned int _mmc_boot_mode;
186
187	// these variables are allocated in the bdv_driver.c file
188	extern spin_lock_t _bdv_lock __attribute__((aligned(64)));
189	extern unsigned int _bdv_trdid;
190	extern unsigned int _bdv_status;
191
192	extern void boot_entry();
193
194	////////////////////////////////////////////////////////////////////////////////////
195	// Align the value of paddr or vaddr to the required alignement,
196	// defined by alignPow2 == L2(alignement).
197	////////////////////////////////////////////////////////////////////////////////////
198	paddr_t paddr_align_to( paddr_t paddr, unsigned int alignPow2 )
199	{
200	paddr_t mask = (1 << alignPow2) - 1;
201	return ((paddr + mask) & ~mask);
202	}
203
204	unsigned int vaddr_align_to( unsigned int vaddr, unsigned int alignPow2 )
205	{
206	unsigned int mask = (1 << alignPow2) - 1;
207	return ((vaddr + mask) & ~mask);
208	}
209
210	/////////////////////////////////////////////////////////////////////////////////////
211	// This function map a vseg identified by the vseg pointer.
212	//
213	// A given vseg can be mapped in a Big Physical Pages (BPP: 2 Mbytes) or in a
214	// Small Physical Pages (SPP: 4 Kbytes), depending on the "big" attribute of vseg.
215	//
216	// All boot vsegs are packed in a single BPP (2 Mbytes). For all other vsegs,
217	// there is only one vseg in a given page (BPP or SPP), but a single vseg can
218	// cover several contiguous physical pages.
219	// Only the vsegs used by the boot code can be identity mapping.
220	//
221	// 1) First step: it computes various vseg attributes and checks
222	// alignment constraints.
223	//
224	// 2) Second step: it allocates the required number of contiguous physical pages,
225	// computes the physical base address (if the vseg is not identity mapping),
226	// register it in the vseg pbase field, and update the page table(s).
227	//
228	// 3) Third step (only for vseg that have the VSEG_TYPE_PTAB): for a given cluster,
229	// the M page tables associated to the M vspaces are packed in the same vseg.
230	// We divide this vseg in M sub-segments, and compute the vbase and pbase
231	// addresses for M page tables, and register these addresses in the _ptabs_paddr
232	// and _ptabs_vaddr arrays.
233	/////////////////////////////////////////////////////////////////////////////////////
234	void boot_vseg_map( mapping_vseg_t* vseg,
235	unsigned int vspace_id )
236	{
237	mapping_header_t* header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
238	mapping_cluster_t* cluster = _get_cluster_base(header);
239	mapping_pseg_t* pseg = _get_pseg_base(header);
240
241	//////////// First step : compute vseg attributes
242
243	// compute destination cluster pointer & coordinates
244	pseg = pseg + vseg->psegid;
245	cluster = cluster + pseg->clusterid;
246	unsigned int x_dest = cluster->x;
247	unsigned int y_dest = cluster->y;
248
249	// compute the "big" vseg attribute
250	unsigned int big = vseg->big;
251
252	// all vsegs must be aligned on 4Kbytes
253	if ( vseg->vbase & 0x00000FFF )
254	{
255	_printf("\n[BOOT ERROR] vseg %s not aligned : vbase = %x\n",
256	vseg->name, vseg->vbase );
257	_exit();
258	}
259
260	// compute the "is_ram" vseg attribute
261	unsigned int is_ram;
262	if ( pseg->type == PSEG_TYPE_RAM ) is_ram = 1;
263	else is_ram = 0;
264
265	// compute the "is_ptab" attribute
266	unsigned int is_ptab;
267	if ( vseg->type == VSEG_TYPE_PTAB ) is_ptab = 1;
268	else is_ptab = 0;
269
270	// compute actual vspace index
271	unsigned int vsid;
272	if ( vspace_id == 0xFFFFFFFF ) vsid = 0;
273	else vsid = vspace_id;
274
275	//////////// Second step : compute ppn and npages
276	//////////// - if identity mapping : ppn <= vpn
277	//////////// - if vseg is periph : ppn <= pseg.base >> 12
278	//////////// - if vseg is ram : ppn <= physical memory allocator
279
280	unsigned int ppn; // first physical page index (28 bits = \|x\|y\|bppi\|sppi\|)
281	unsigned int vpn; // first virtual page index (20 bits = \|ix1\|ix2\|)
282	unsigned int vpn_max; // last virtual page index (20 bits = \|ix1\|ix2\|)
283
284	vpn = vseg->vbase >> 12;
285	vpn_max = (vseg->vbase + vseg->length - 1) >> 12;
286
287	// compute npages
288	unsigned int npages; // number of required (big or small) pages
289	if ( big == 0 ) npages = vpn_max - vpn + 1; // number of small pages
290	else npages = (vpn_max>>9) - (vpn>>9) + 1; // number of big pages
291
292	// compute ppn
293	if ( vseg->ident ) // identity mapping : no memory allocation required
294	{
295	ppn = vpn;
296	}
297	else // not identity mapping
298	{
299	if ( is_ram ) // RAM : physical memory allocation required
300	{
301	// compute pointer on physical memory allocator in dest cluster
302	pmem_alloc_t* palloc = &_boot_pmem_alloc[x_dest][y_dest];
303
304	if ( big == 0 ) // allocate contiguous SPPs
305	{
306	ppn = _get_small_ppn( palloc, npages );
307	}
308	else // allocate contiguous BPPs
309	{
310	ppn = _get_big_ppn( palloc, npages );
311	}
312	}
313	else // PERI : no memory allocation required
314	{
315	ppn = pseg->base >> 12;
316	}
317	}
318
319	// update vseg.pbase field and register vseg mapped
320	vseg->pbase = ((paddr_t)ppn) << 12;
321	vseg->mapped = 1;
322
323	//////////// Third step : (only if the vseg is a page table)
324	//////////// - compute the physical & virtual base address for each vspace
325	//////////// by dividing the vseg in several sub-segments.
326	//////////// - register it in _ptabs_vaddr & _ptabs_paddr arrays,
327	//////////// and initialize next_pt2 allocators.
328	//////////// - reset all entries in first level page tables
329
330	if ( is_ptab )
331	{
332	unsigned int vs; // vspace index
333	unsigned int nspaces; // number of vspaces
334	unsigned int nsp; // number of small pages for one PTAB
335	unsigned int offset; // address offset for current PTAB
336
337	nspaces = header->vspaces;
338	offset = 0;
339
340	// compute max_pt2: each PTAB must be aligned on a 8 Kbytes boundary
341	nsp = ( vseg->length >> 12 ) / nspaces;
342	if ( (nsp & 0x1) == 0x1 ) nsp = nsp - 1;
343	_ptabs_max_pt2 = ((nsp<<12) - PT1_SIZE) / PT2_SIZE;
344
345	// save max_pt2 in header
346	header->max_pt2 = _ptabs_max_pt2;
347
348	for ( vs = 0 ; vs < nspaces ; vs++ )
349	{
350	_ptabs_vaddr [vs][x_dest][y_dest] = (vpn + offset) << 12;
351	_ptabs_paddr [vs][x_dest][y_dest] = ((paddr_t)(ppn + offset)) << 12;
352	_ptabs_next_pt2[vs][x_dest][y_dest] = 0;
353	offset += nsp;
354
355	// reset all entries in PT1 (8 Kbytes)
356	_physical_memset( _ptabs_paddr[vs][x_dest][y_dest], PT1_SIZE, 0 );
357	}
358	}
359
360	asm volatile ("sync");
361
362	#if BOOT_DEBUG_PT
363	if ( big )
364	_printf("\n[BOOT] vseg %s : cluster[%d,%d] / "
365	"vbase = %x / length = %x / BIG / npages = %d / pbase = %l\n",
366	vseg->name, x_dest, y_dest, vseg->vbase, vseg->length, npages, vseg-> pbase );
367	else
368	_printf("\n[BOOT] vseg %s : cluster[%d,%d] / "
369	"vbase = %x / length = %x / SMALL / npages = %d / pbase = %l\n",
370	vseg->name, x_dest, y_dest, vseg->vbase, vseg->length, npages, vseg-> pbase );
371	#endif
372
373	} // end boot_vseg_map()
374
375	/////////////////////////////////////////////////////////////////////////////////////
376	// For the vseg defined by the vseg pointer, this function register PTEs
377	// in one or several page tables.
378	// It is a global vseg (kernel vseg) if (vspace_id == 0xFFFFFFFF).
379	// The number of involved PTABs depends on the "local" and "global" attributes:
380	// - PTEs are replicated in all vspaces for a global vseg.
381	// - PTEs are replicated in all clusters containing procs for a non local vseg.
382	/////////////////////////////////////////////////////////////////////////////////////
383	void boot_vseg_pte( mapping_vseg_t* vseg,
384	unsigned int vspace_id )
385	{
386	// compute the "global" vseg attribute and actual vspace index
387	unsigned int global;
388	unsigned int vsid;
389	if ( vspace_id == 0xFFFFFFFF )
390	{
391	global = 1;
392	vsid = 0;
393	}
394	else
395	{
396	global = 0;
397	vsid = vspace_id;
398	}
399
400	// compute the "local" and "big" attributes
401	unsigned int local = vseg->local;
402	unsigned int big = vseg->big;
403
404	// compute vseg flags
405	// The three flags (Local, Remote and Dirty) are set to 1
406	// to avoid hardware update for these flags, because GIET_VM
407	// does not use these flags.
408	unsigned int flags = 0;
409	if (vseg->mode & C_MODE_MASK) flags \|= PTE_C;
410	if (vseg->mode & X_MODE_MASK) flags \|= PTE_X;
411	if (vseg->mode & W_MODE_MASK) flags \|= PTE_W;
412	if (vseg->mode & U_MODE_MASK) flags \|= PTE_U;
413	flags \|= PTE_L;
414	flags \|= PTE_R;
415	flags \|= PTE_D;
416
417	#if GIET_USE_MMU_GLOBAL_FLAG
418	if ( global ) flags \|= PTE_G;
419	#endif
420
421	// compute VPN, PPN and number of pages (big or small)
422	unsigned int vpn = vseg->vbase >> 12;
423	unsigned int vpn_max = (vseg->vbase + vseg->length - 1) >> 12;
424	unsigned int ppn = (unsigned int)(vseg->pbase >> 12);
425	unsigned int npages;
426	if ( big == 0 ) npages = vpn_max - vpn + 1;
427	else npages = (vpn_max>>9) - (vpn>>9) + 1;
428
429	// compute destination cluster coordinates, for local vsegs
430	mapping_header_t* header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
431	mapping_cluster_t* cluster = _get_cluster_base(header);
432	mapping_pseg_t* pseg = _get_pseg_base(header);
433	mapping_pseg_t* pseg_dest = &pseg[vseg->psegid];
434	mapping_cluster_t* cluster_dest = &cluster[pseg_dest->clusterid];
435	unsigned int x_dest = cluster_dest->x;
436	unsigned int y_dest = cluster_dest->y;
437
438	unsigned int p; // iterator for physical page index
439	unsigned int x; // iterator for cluster x coordinate
440	unsigned int y; // iterator for cluster y coordinate
441	unsigned int v; // iterator for vspace index
442
443	// loop on PTEs
444	for ( p = 0 ; p < npages ; p++ )
445	{
446	if ( (local != 0) && (global == 0) ) // one cluster / one vspace
447	{
448	if ( big ) // big pages => PTE1s
449	{
450	_v2p_add_pte1( vsid,
451	x_dest,
452	y_dest,
453	vpn + (p<<9),
454	flags,
455	ppn + (p<<9),
456	vseg->ident );
457	}
458	else // small pages => PTE2s
459	{
460	_v2p_add_pte2( vsid,
461	x_dest,
462	y_dest,
463	vpn + p,
464	flags,
465	ppn + p,
466	vseg->ident );
467	}
468	}
469	else if ( (local == 0) && (global == 0) ) // all clusters / one vspace
470	{
471	for ( x = 0 ; x < X_SIZE ; x++ )
472	{
473	for ( y = 0 ; y < Y_SIZE ; y++ )
474	{
475	if ( cluster[(x * Y_SIZE) + y].procs )
476	{
477	if ( big ) // big pages => PTE1s
478	{
479	_v2p_add_pte1( vsid,
480	x,
481	y,
482	vpn + (p<<9),
483	flags,
484	ppn + (p<<9),
485	vseg->ident );
486	}
487	else // small pages => PTE2s
488	{
489	_v2p_add_pte2( vsid,
490	x,
491	y,
492	vpn + p,
493	flags,
494	ppn + p,
495	vseg->ident );
496	}
497	}
498	}
499	}
500	}
501	else if ( (local != 0) && (global != 0) ) // one cluster / all vspaces
502	{
503	for ( v = 0 ; v < header->vspaces ; v++ )
504	{
505	if ( big ) // big pages => PTE1s
506	{
507	_v2p_add_pte1( v,
508	x_dest,
509	y_dest,
510	vpn + (p<<9),
511	flags,
512	ppn + (p<<9),
513	vseg->ident );
514	}
515	else // small pages = PTE2s
516	{
517	_v2p_add_pte2( v,
518	x_dest,
519	y_dest,
520	vpn + p,
521	flags,
522	ppn + p,
523	vseg->ident );
524	}
525	}
526	}
527	else if ( (local == 0) && (global != 0) ) // all clusters / all vspaces
528	{
529	for ( x = 0 ; x < X_SIZE ; x++ )
530	{
531	for ( y = 0 ; y < Y_SIZE ; y++ )
532	{
533	if ( cluster[(x * Y_SIZE) + y].procs )
534	{
535	for ( v = 0 ; v < header->vspaces ; v++ )
536	{
537	if ( big ) // big pages => PTE1s
538	{
539	_v2p_add_pte1( v,
540	x,
541	y,
542	vpn + (p<<9),
543	flags,
544	ppn + (p<<9),
545	vseg->ident );
546	}
547	else // small pages -> PTE2s
548	{
549	_v2p_add_pte2( v,
550	x,
551	y,
552	vpn + p,
553	flags,
554	ppn + p,
555	vseg->ident );
556	}
557	}
558	}
559	}
560	}
561	}
562	} // end for pages
563
564	asm volatile ("sync");
565
566	} // end boot_vseg_pte()
567
568
569	///////////////////////////////////////////////////////////////////////////////
570	// This function is executed by processor[x][y][0] in each cluster
571	// containing at least one processor.
572	// It initialises all page table for all global or private vsegs
573	// mapped in cluster[x][y], as specified in the mapping.
574	// In each cluster all page tables for the different vspaces must be
575	// packed in one vseg occupying one single BPP (Big Physical Page).
576	//
577	// For each vseg, the mapping is done in two steps:
578	// 1) mapping : the boot_vseg_map() function allocates contiguous BPPs
579	// or SPPs (if the vseg is not associated to a peripheral), and register
580	// the physical base address in the vseg pbase field. It initialises the
581	// _ptabs_vaddr[] and _ptabs_paddr[] arrays if the vseg is a PTAB.
582	//
583	// 2) page table initialisation : the boot_vseg_pte() function initialise
584	// the PTEs (both PTE1 and PTE2) in one or several page tables:
585	// - PTEs are replicated in all vspaces for a global vseg.
586	// - PTEs are replicated in all clusters for a non local vseg.
587	//
588	// We must handle vsegs in the following order
589	// 1) global vseg containing PTAB mapped in cluster[x][y],
590	// 2) global vsegs occupying more than one BPP mapped in cluster[x][y],
591	// 3) others global vsegs mapped in cluster[x][y],
592	// 4) all private vsegs in all user spaces mapped in cluster[x][y].
593	///////////////////////////////////////////////////////////////////////////////
594	void boot_ptab_init( unsigned int cx,
595	unsigned int cy )
596	{
597	mapping_header_t* header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
598	mapping_vspace_t* vspace = _get_vspace_base(header);
599	mapping_vseg_t* vseg = _get_vseg_base(header);
600	mapping_cluster_t* cluster ;
601	mapping_pseg_t* pseg ;
602
603	unsigned int vspace_id;
604	unsigned int vseg_id;
605
606	unsigned int procid = _get_procid();
607	unsigned int lpid = procid & ((1<<P_WIDTH)-1);
608
609	if( lpid )
610	{
611	_printf("\n[BOOT ERROR] in boot_ptab_init() : "
612	"P[%d][%d][%d] should not execute it\n", cx, cy, lpid );
613	_exit();
614	}
615
616	if ( header->vspaces == 0 )
617	{
618	_printf("\n[BOOT ERROR] in boot_ptab_init() : "
619	"mapping %s contains no vspace\n", header->name );
620	_exit();
621	}
622
623	///////// Phase 1 : global vseg containing the PTAB (two barriers required)
624
625	// get PTAB global vseg in cluster(cx,cy)
626	unsigned int found = 0;
627	for (vseg_id = 0; vseg_id < header->globals; vseg_id++)
628	{
629	pseg = _get_pseg_base(header) + vseg[vseg_id].psegid;
630	cluster = _get_cluster_base(header) + pseg->clusterid;
631	if ( (vseg[vseg_id].type == VSEG_TYPE_PTAB) &&
632	(cluster->x == cx) && (cluster->y == cy) )
633	{
634	found = 1;
635	break;
636	}
637	}
638	if ( found == 0 )
639	{
640	_printf("\n[BOOT ERROR] in boot_ptab_init() : "
641	"cluster[%d][%d] contains no PTAB vseg\n", cx , cy );
642	_exit();
643	}
644
645	boot_vseg_map( &vseg[vseg_id], 0xFFFFFFFF );
646
647	//////////////////////////////////////////////
648	_simple_barrier_wait( &_barrier_all_clusters );
649	//////////////////////////////////////////////
650
651	boot_vseg_pte( &vseg[vseg_id], 0xFFFFFFFF );
652
653	//////////////////////////////////////////////
654	_simple_barrier_wait( &_barrier_all_clusters );
655	//////////////////////////////////////////////
656
657	///////// Phase 2 : global vsegs occupying more than one BPP
658
659	for (vseg_id = 0; vseg_id < header->globals; vseg_id++)
660	{
661	pseg = _get_pseg_base(header) + vseg[vseg_id].psegid;
662	cluster = _get_cluster_base(header) + pseg->clusterid;
663	if ( (vseg[vseg_id].length > 0x200000) &&
664	(vseg[vseg_id].mapped == 0) &&
665	(cluster->x == cx) && (cluster->y == cy) )
666	{
667	boot_vseg_map( &vseg[vseg_id], 0xFFFFFFFF );
668	boot_vseg_pte( &vseg[vseg_id], 0xFFFFFFFF );
669	}
670	}
671
672	///////// Phase 3 : all others global vsegs
673
674	for (vseg_id = 0; vseg_id < header->globals; vseg_id++)
675	{
676	pseg = _get_pseg_base(header) + vseg[vseg_id].psegid;
677	cluster = _get_cluster_base(header) + pseg->clusterid;
678	if ( (vseg[vseg_id].mapped == 0) &&
679	(cluster->x == cx) && (cluster->y == cy) )
680	{
681	boot_vseg_map( &vseg[vseg_id], 0xFFFFFFFF );
682	boot_vseg_pte( &vseg[vseg_id], 0xFFFFFFFF );
683	}
684	}
685
686	///////// Phase 4 : all private vsegs
687
688	for (vspace_id = 0; vspace_id < header->vspaces; vspace_id++)
689	{
690	for (vseg_id = vspace[vspace_id].vseg_offset;
691	vseg_id < (vspace[vspace_id].vseg_offset + vspace[vspace_id].vsegs);
692	vseg_id++)
693	{
694	if ( vseg[vseg_id].type == VSEG_TYPE_MMAP ) // no static mapping
695	{
696	// psegid used as page allocator in MMAP vseg
697	vseg[vseg_id].psegid = 0;
698	}
699	else // static mapping
700	{
701	pseg = _get_pseg_base(header) + vseg[vseg_id].psegid;
702	cluster = _get_cluster_base(header) + pseg->clusterid;
703	if ( (cluster->x == cx) && (cluster->y == cy) )
704	{
705	boot_vseg_map( &vseg[vseg_id], vspace_id );
706	boot_vseg_pte( &vseg[vseg_id], vspace_id );
707	}
708	}
709	}
710	}
711
712	//////////////////////////////////////////////
713	_simple_barrier_wait( &_barrier_all_clusters );
714	//////////////////////////////////////////////
715
716	} // end boot_ptab_init()
717
718	////////////////////////////////////////////////////////////////////////////////
719	// This function should be executed by P[0][0][0] only. It completes the
720	// page table initialisation, taking care of all global vsegs that are
721	// not mapped in a cluster containing a processor, and have not been
722	// handled by the boot_ptab_init(x,y) function.
723	// An example of such vsegs are the external peripherals in TSAR_LETI platform.
724	////////////////////////////////////////////////////////////////////////////////
725	void boot_ptab_extend()
726	{
727
728	mapping_header_t* header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
729	mapping_vseg_t* vseg = _get_vseg_base(header);
730
731	unsigned int vseg_id;
732
733	for (vseg_id = 0; vseg_id < header->globals; vseg_id++)
734	{
735	if ( vseg[vseg_id].mapped == 0 )
736	{
737	boot_vseg_map( &vseg[vseg_id], 0xFFFFFFFF );
738	boot_vseg_pte( &vseg[vseg_id], 0xFFFFFFFF );
739	}
740	}
741	} // end boot_ptab_extend()
742
743	///////////////////////////////////////////////////////////////////////////////
744	// This function returns in the vbase and length buffers the virtual base
745	// address and the length of the segment allocated to the schedulers array
746	// in the cluster defined by the clusterid argument.
747	///////////////////////////////////////////////////////////////////////////////
748	void boot_get_sched_vaddr( unsigned int cluster_id,
749	unsigned int* vbase,
750	unsigned int* length )
751	{
752	mapping_header_t* header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
753	mapping_vseg_t* vseg = _get_vseg_base(header);
754	mapping_pseg_t* pseg = _get_pseg_base(header);
755
756	unsigned int vseg_id;
757	unsigned int found = 0;
758
759	for ( vseg_id = 0 ; (vseg_id < header->vsegs) && (found == 0) ; vseg_id++ )
760	{
761	if ( (vseg[vseg_id].type == VSEG_TYPE_SCHED) &&
762	(pseg[vseg[vseg_id].psegid].clusterid == cluster_id ) )
763	{
764	*vbase = vseg[vseg_id].vbase;
765	*length = vseg[vseg_id].length;
766	found = 1;
767	}
768	}
769	if ( found == 0 )
770	{
771	mapping_cluster_t* cluster = _get_cluster_base(header);
772	_printf("\n[BOOT ERROR] No vseg of type SCHED in cluster [%d,%d]\n",
773	cluster[cluster_id].x, cluster[cluster_id].y );
774	_exit();
775	}
776	} // end boot_get_sched_vaddr()
777
778	#if BOOT_DEBUG_SCHED
779	/////////////////////////////////////////////////////////////////////////////
780	// This debug function should be executed by only one procesor.
781	// It loops on all processors in all clusters to display
782	// the HWI / PTI / WTI interrupt vectors for each processor.
783	/////////////////////////////////////////////////////////////////////////////
784	void boot_sched_irq_display()
785	{
786	unsigned int cx;
787	unsigned int cy;
788	unsigned int lpid;
789	unsigned int slot;
790	unsigned int entry;
791	unsigned int type;
792	unsigned int channel;
793
794	mapping_header_t* header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
795	mapping_cluster_t* cluster = _get_cluster_base(header);
796
797	static_scheduler_t* psched;
798
799	for ( cx = 0 ; cx < X_SIZE ; cx++ )
800	{
801	for ( cy = 0 ; cy < Y_SIZE ; cy++ )
802	{
803	unsigned int cluster_id = (cx * Y_SIZE) + cy;
804	unsigned int nprocs = cluster[cluster_id].procs;
805
806	for ( lpid = 0 ; lpid < nprocs ; lpid++ )
807	{
808	psched = _schedulers[cx][cy][lpid];
809
810	_printf("\n[BOOT] interrupt vectors for proc[%d,%d,%d]\n",
811	cx , cy , lpid );
812
813	for ( slot = 0 ; slot < 32 ; slot++ )
814	{
815	entry = psched->hwi_vector[slot];
816	type = entry & 0xFFFF;
817	channel = entry >> 16;
818	if ( type != ISR_DEFAULT )
819	_printf(" - HWI : index = %d / type = %s / channel = %d\n",
820	slot , _isr_type_str[type] , channel );
821	}
822	for ( slot = 0 ; slot < 32 ; slot++ )
823	{
824	entry = psched->wti_vector[slot];
825	type = entry & 0xFFFF;
826	channel = entry >> 16;
827	if ( type != ISR_DEFAULT )
828	_printf(" - WTI : index = %d / type = %s / channel = %d\n",
829	slot , _isr_type_str[type] , channel );
830	}
831	for ( slot = 0 ; slot < 32 ; slot++ )
832	{
833	entry = psched->pti_vector[slot];
834	type = entry & 0xFFFF;
835	channel = entry >> 16;
836	if ( type != ISR_DEFAULT )
837	_printf(" - PTI : index = %d / type = %s / channel = %d\n",
838	slot , _isr_type_str[type] , channel );
839	}
840	}
841	}
842	}
843	} // end boot_sched_irq_display()
844	#endif
845
846
847	////////////////////////////////////////////////////////////////////////////////////
848	// This function is executed in parallel by all processors P[x][y][0].
849	// P[x][y][0] initialises all schedulers in cluster[x][y]. The MMU must be activated.
850	// It is split in two phases separated by a synchronisation barrier.
851	// - In Step 1, it initialises the _schedulers[x][y][p] pointers array, the
852	// idle_thread context, the HWI / PTI / WTI interrupt vectors,
853	// and the XCU HWI / PTI / WTI masks.
854	// - In Step 2, it scan all threads in all vspaces to complete the threads contexts,
855	// initialisation as specified in the mapping_info data structure,
856	// and set the CP0_SCHED register.
857	////////////////////////////////////////////////////////////////////////////////////
858	void boot_scheduler_init( unsigned int x,
859	unsigned int y )
860	{
861	mapping_header_t* header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
862	mapping_cluster_t* cluster = _get_cluster_base(header);
863	mapping_vspace_t* vspace = _get_vspace_base(header);
864	mapping_vseg_t* vseg = _get_vseg_base(header);
865	mapping_thread_t* thread = _get_thread_base(header);
866	mapping_periph_t* periph = _get_periph_base(header);
867	mapping_irq_t* irq = _get_irq_base(header);
868
869	unsigned int periph_id;
870	unsigned int irq_id;
871	unsigned int vspace_id;
872	unsigned int vseg_id;
873	unsigned int thread_id;
874
875	unsigned int sched_vbase; // schedulers array vbase address
876	unsigned int sched_length; // schedulers array length
877	static_scheduler_t* psched; // pointer on processor scheduler
878
879	unsigned int cluster_id = (x * Y_SIZE) + y;
880	unsigned int cluster_xy = (x << Y_WIDTH) + y;
881	unsigned int nprocs = cluster[cluster_id].procs;
882	unsigned int lpid;
883
884	if ( nprocs > 8 )
885	{
886	_printf("\n[BOOT ERROR] cluster[%d,%d] contains more than 8 procs\n", x, y );
887	_exit();
888	}
889
890	////////////////////////////////////////////////////////////////////////////////
891	// Step 1 : - initialize the schedulers[] array of pointers,
892	// - initialize the "threads" and "current variables.
893	// - initialise the idle_thread context.
894	// - initialize the HWI, PTI and WTI interrupt vectors.
895	// - initialize the XCU masks for HWI / WTI / PTI interrupts.
896	//
897	// The general policy for interrupts routing is the following:
898	// - the local HWI are statically allocatedted to local processors.
899	// - the nprocs first PTI are allocated for TICK (one per processor).
900	// - we allocate 4 WTI per processor: the first one is for WAKUP,
901	// the 3 others WTI are used for external interrupts (from PIC),
902	// and are dynamically allocated by kernel on demand.
903	///////////////////////////////////////////////////////////////////////////////
904
905	// get scheduler array virtual base address in cluster[x,y]
906	boot_get_sched_vaddr( cluster_id, &sched_vbase, &sched_length );
907
908	if ( sched_length < (nprocs<<13) ) // 8 Kbytes per scheduler
909	{
910	_printf("\n[BOOT ERROR] Sched segment too small in cluster[%d,%d]\n",
911	x, y );
912	_exit();
913	}
914
915	// loop on local processors
916	for ( lpid = 0 ; lpid < nprocs ; lpid++ )
917	{
918	// get scheduler pointer and initialise the schedulers pointers array
919	psched = (static_scheduler_t*)(sched_vbase + (lpid<<13));
920	_schedulers[x][y][lpid] = psched;
921
922	// initialise the "threads" and "current" variables default values
923	psched->threads = 0;
924	psched->current = IDLE_THREAD_INDEX;
925
926	// set default values for HWI / PTI / SWI vectors (valid bit = 0)
927	unsigned int slot;
928	for (slot = 0; slot < 32; slot++)
929	{
930	psched->hwi_vector[slot] = 0;
931	psched->pti_vector[slot] = 0;
932	psched->wti_vector[slot] = 0;
933	}
934
935	// initializes the idle_thread context:
936	// - the SR slot is 0xFF03 because this thread run in kernel mode.
937	// - it uses the page table of vspace[0]
938	// - it uses the kernel TTY0 terminal
939	// - slots containing addresses (SP,RA,EPC) are initialised by kernel_init()
940	// - It is always executable (NORUN == 0)
941
942	psched->context[IDLE_THREAD_INDEX].slot[CTX_CR_ID] = 0;
943	psched->context[IDLE_THREAD_INDEX].slot[CTX_SR_ID] = 0xFF03;
944	psched->context[IDLE_THREAD_INDEX].slot[CTX_PTPR_ID] = _ptabs_paddr[0][x][y]>>13;
945	psched->context[IDLE_THREAD_INDEX].slot[CTX_PTAB_ID] = _ptabs_vaddr[0][x][y];
946	psched->context[IDLE_THREAD_INDEX].slot[CTX_NPT2_ID] = _ptabs_next_pt2[0][x][y];
947	psched->context[IDLE_THREAD_INDEX].slot[CTX_TTY_ID] = 0;
948	psched->context[IDLE_THREAD_INDEX].slot[CTX_LTID_ID] = IDLE_THREAD_INDEX;
949	psched->context[IDLE_THREAD_INDEX].slot[CTX_VSID_ID] = 0;
950	psched->context[IDLE_THREAD_INDEX].slot[CTX_NORUN_ID] = 0;
951	psched->context[IDLE_THREAD_INDEX].slot[CTX_SIGS_ID] = 0;
952	psched->context[IDLE_THREAD_INDEX].slot[CTX_LOCKS_ID] = 0;
953	}
954
955	// HWI / PTI / WTI masks (up to 8 local processors)
956	unsigned int hwi_mask[8] = {0,0,0,0,0,0,0,0};
957	unsigned int pti_mask[8] = {0,0,0,0,0,0,0,0};
958	unsigned int wti_mask[8] = {0,0,0,0,0,0,0,0};
959
960	// scan local peripherals to get and check local XCU
961	mapping_periph_t* xcu = NULL;
962	unsigned int min = cluster[cluster_id].periph_offset ;
963	unsigned int max = min + cluster[cluster_id].periphs ;
964
965	for ( periph_id = min ; periph_id < max ; periph_id++ )
966	{
967	if( periph[periph_id].type == PERIPH_TYPE_XCU )
968	{
969	xcu = &periph[periph_id];
970
971	// check nb_hwi_in
972	if ( xcu->arg0 < xcu->irqs )
973	{
974	_printf("\n[BOOT ERROR] Not enough HWI inputs for XCU[%d,%d]"
975	" : nb_hwi = %d / nb_irqs = %d\n",
976	x , y , xcu->arg0 , xcu->irqs );
977	_exit();
978	}
979	// check nb_pti_in
980	if ( xcu->arg2 < nprocs )
981	{
982	_printf("\n[BOOT ERROR] Not enough PTI inputs for XCU[%d,%d]\n",
983	x, y );
984	_exit();
985	}
986	// check nb_wti_in
987	if ( xcu->arg1 < (4 * nprocs) )
988	{
989	_printf("\n[BOOT ERROR] Not enough WTI inputs for XCU[%d,%d]\n",
990	x, y );
991	_exit();
992	}
993	// check nb_irq_out
994	if ( xcu->channels < (nprocs * header->irq_per_proc) )
995	{
996	_printf("\n[BOOT ERROR] Not enough outputs for XCU[%d,%d]\n",
997	x, y );
998	_exit();
999	}
1000	}
1001	}
1002
1003	if ( xcu == NULL )
1004	{
1005	_printf("\n[BOOT ERROR] missing XCU in cluster[%d,%d]\n", x , y );
1006	_exit();
1007	}
1008
1009	// HWI interrupt vector definition
1010	// scan HWI connected to local XCU
1011	// for round-robin allocation to local processors
1012	lpid = 0;
1013	for ( irq_id = xcu->irq_offset ;
1014	irq_id < xcu->irq_offset + xcu->irqs ;
1015	irq_id++ )
1016	{
1017	unsigned int type = irq[irq_id].srctype;
1018	unsigned int srcid = irq[irq_id].srcid;
1019	unsigned int isr = irq[irq_id].isr & 0xFFFF;
1020	unsigned int channel = irq[irq_id].channel << 16;
1021
1022	if ( (type != IRQ_TYPE_HWI) \|\| (srcid > 31) )
1023	{
1024	_printf("\n[BOOT ERROR] Bad IRQ in cluster[%d,%d]\n", x, y );
1025	_exit();
1026	}
1027
1028	// register entry in HWI interrupt vector
1029	_schedulers[x][y][lpid]->hwi_vector[srcid] = isr \| channel;
1030
1031	// update XCU HWI mask for P[x,y,lpid]
1032	hwi_mask[lpid] = hwi_mask[lpid] \| (1<<srcid);
1033
1034	lpid = (lpid + 1) % nprocs;
1035	} // end for irqs
1036
1037	// PTI interrupt vector definition
1038	// one PTI for TICK per processor
1039	for ( lpid = 0 ; lpid < nprocs ; lpid++ )
1040	{
1041	// register entry in PTI interrupt vector
1042	_schedulers[x][y][lpid]->pti_vector[lpid] = ISR_TICK;
1043
1044	// update XCU PTI mask for P[x,y,lpid]
1045	pti_mask[lpid] = pti_mask[lpid] \| (1<<lpid);
1046	}
1047
1048	// WTI interrupt vector definition
1049	// 4 WTI per processor, first for WAKUP
1050	for ( lpid = 0 ; lpid < nprocs ; lpid++ )
1051	{
1052	// register WAKUP ISR in WTI interrupt vector
1053	_schedulers[x][y][lpid]->wti_vector[lpid] = ISR_WAKUP;
1054
1055	// update XCU WTI mask for P[x,y,lpid] (4 entries per proc)
1056	wti_mask[lpid] = wti_mask[lpid] \| (0x1<<(lpid ));
1057	wti_mask[lpid] = wti_mask[lpid] \| (0x1<<(lpid + NB_PROCS_MAX ));
1058	wti_mask[lpid] = wti_mask[lpid] \| (0x1<<(lpid + 2*NB_PROCS_MAX));
1059	wti_mask[lpid] = wti_mask[lpid] \| (0x1<<(lpid + 3*NB_PROCS_MAX));
1060	}
1061
1062	// set the XCU masks for HWI / WTI / PTI interrupts
1063	for ( lpid = 0 ; lpid < nprocs ; lpid++ )
1064	{
1065	unsigned int channel = lpid * IRQ_PER_PROCESSOR;
1066
1067	_xcu_set_mask( cluster_xy, channel, hwi_mask[lpid], IRQ_TYPE_HWI );
1068	_xcu_set_mask( cluster_xy, channel, wti_mask[lpid], IRQ_TYPE_WTI );
1069	_xcu_set_mask( cluster_xy, channel, pti_mask[lpid], IRQ_TYPE_PTI );
1070	}
1071
1072	//////////////////////////////////////////////
1073	_simple_barrier_wait( &_barrier_all_clusters );
1074	//////////////////////////////////////////////
1075
1076	#if BOOT_DEBUG_SCHED
1077	if ( cluster_xy == 0 ) boot_sched_irq_display();
1078	_simple_barrier_wait( &_barrier_all_clusters );
1079	#endif
1080
1081	///////////////////////////////////////////////////////////////////////////////
1082	// Step 2 : Initialise the threads context. The context of a thread placed
1083	// on processor P must be stored in the scheduler of P.
1084	// For each vspace, this require two nested loops: loop on the threads,
1085	// and loop on the local processors in cluster[x,y].
1086	// We complete the scheduler when the required placement matches
1087	// the local processor.
1088	///////////////////////////////////////////////////////////////////////////////
1089
1090	for (vspace_id = 0; vspace_id < header->vspaces; vspace_id++)
1091	{
1092	// We must set the PTPR depending on the vspace, because the start_vector
1093	// and the stack address are defined in virtual space.
1094	_set_mmu_ptpr( (unsigned int)(_ptabs_paddr[vspace_id][x][y] >> 13) );
1095
1096	// loop on the threads in vspace (thread_id is the global index in mapping)
1097	for (thread_id = vspace[vspace_id].thread_offset;
1098	thread_id < (vspace[vspace_id].thread_offset + vspace[vspace_id].threads);
1099	thread_id++)
1100	{
1101	// get the required thread placement coordinates [x,y,p]
1102	unsigned int req_x = cluster[thread[thread_id].clusterid].x;
1103	unsigned int req_y = cluster[thread[thread_id].clusterid].y;
1104	unsigned int req_p = thread[thread_id].proclocid;
1105
1106	// skip this thread if it is allocated to another cluster
1107	if ( ( req_x != x ) \|\| ( req_y != y ) ) continue;
1108
1109	if ( req_p >= NB_PROCS_MAX )
1110	{
1111	_printf("\n[BOOT ERROR] Bad allocation of thread %s from vspace %s\n",
1112	thread[thread_id].name,
1113	vspace[vspace_id].name);
1114	_exit();
1115	}
1116
1117	// ctx_norun : two conditions to activate a thread
1118	// - The vspace.active flag is set in the mapping
1119	// - The thread.is_main flag is set in the mapping
1120	unsigned int ctx_norun = (unsigned int)(vspace[vspace_id].active == 0) \|
1121	(unsigned int)(thread[thread_id].is_main == 0);
1122
1123	// ctx_ptpr : page table physical base address (shifted by 13 bit)
1124	unsigned int ctx_ptpr = (_ptabs_paddr[vspace_id][req_x][req_y] >> 13);
1125
1126	// ctx_ptab : page_table virtual base address
1127	unsigned int ctx_ptab = _ptabs_vaddr[vspace_id][req_x][req_y];
1128
1129	// ctx_npt2 : page_table PT2 allocator
1130	unsigned int ctx_npt2 = _ptabs_next_pt2[vspace_id][req_x][req_y];
1131
1132	// ctx_entry : Get the virtual address of the memory location containing
1133	// the thread entry point : the start_vector is stored by GCC in the
1134	// seg_data segment, and we must wait the application.elf loading to get
1135	// the entry point value...
1136	vseg_id = vspace[vspace_id].start_vseg_id;
1137	unsigned int ctx_entry = vseg[vseg_id].vbase + (thread[thread_id].startid)*4;
1138
1139	// ctx_sp : Get the vseg containing the stack
1140	// allocate 16 slots (64 bytes) for possible arguments.
1141	vseg_id = thread[thread_id].stack_vseg_id;
1142	unsigned int ctx_sp = vseg[vseg_id].vbase + vseg[vseg_id].length - 64;
1143
1144	// pointer on selected scheduler
1145	psched = _schedulers[x][y][req_p];
1146
1147	// ltid : compute local thread index in scheduler
1148	unsigned int ltid = psched->threads;
1149
1150	// update the threads field in scheduler:
1151	psched->threads = ltid + 1;
1152
1153	// ctx_trdid : compute pthread global identifier
1154	unsigned int ctx_trdid = (x<<24) \| (y<<16) \| (req_p<<8) \| ltid;
1155
1156	// initializes the thread context
1157	psched->context[ltid].slot[CTX_CR_ID] = 0;
1158	psched->context[ltid].slot[CTX_SR_ID] = GIET_SR_INIT_VALUE;
1159	psched->context[ltid].slot[CTX_SP_ID] = ctx_sp;
1160	psched->context[ltid].slot[CTX_EPC_ID] = ctx_entry;
1161	psched->context[ltid].slot[CTX_ENTRY_ID] = ctx_entry;
1162	psched->context[ltid].slot[CTX_PTPR_ID] = ctx_ptpr;
1163	psched->context[ltid].slot[CTX_PTAB_ID] = ctx_ptab;
1164	psched->context[ltid].slot[CTX_NPT2_ID] = ctx_npt2;
1165	psched->context[ltid].slot[CTX_LTID_ID] = ltid;
1166	psched->context[ltid].slot[CTX_TRDID_ID] = ctx_trdid;
1167	psched->context[ltid].slot[CTX_VSID_ID] = vspace_id;
1168	psched->context[ltid].slot[CTX_NORUN_ID] = ctx_norun;
1169	psched->context[ltid].slot[CTX_SIGS_ID] = 0;
1170	psched->context[ltid].slot[CTX_LOCKS_ID] = 0;
1171
1172	psched->context[ltid].slot[CTX_TTY_ID] = 0xFFFFFFFF;
1173	psched->context[ltid].slot[CTX_CMA_FB_ID] = 0xFFFFFFFF;
1174	psched->context[ltid].slot[CTX_CMA_RX_ID] = 0xFFFFFFFF;
1175	psched->context[ltid].slot[CTX_CMA_TX_ID] = 0xFFFFFFFF;
1176	psched->context[ltid].slot[CTX_NIC_RX_ID] = 0xFFFFFFFF;
1177	psched->context[ltid].slot[CTX_NIC_TX_ID] = 0xFFFFFFFF;
1178	psched->context[ltid].slot[CTX_TIM_ID] = 0xFFFFFFFF;
1179	psched->context[ltid].slot[CTX_HBA_ID] = 0xFFFFFFFF;
1180
1181	// update thread ltid field in the mapping
1182	thread[thread_id].ltid = ltid;
1183
1184	#if BOOT_DEBUG_SCHED
1185	_printf("\nThread %s in vspace %s allocated to P[%d,%d,%d]\n"
1186	" - ctx[LTID] = %d\n"
1187	" - ctx[TRDID] = %d\n"
1188	" - ctx[SR] = %x\n"
1189	" - ctx[SP] = %x\n"
1190	" - ctx[ENTRY] = %x\n"
1191	" - ctx[PTPR] = %x\n"
1192	" - ctx[PTAB] = %x\n"
1193	" - ctx[NPT2] = %x\n"
1194	" - ctx[VSID] = %d\n"
1195	" - ctx[NORUN] = %x\n"
1196	" - ctx[SIG] = %x\n",
1197	thread[thread_id].name,
1198	vspace[vspace_id].name,
1199	x, y, req_p,
1200	psched->context[ltid].slot[CTX_LTID_ID],
1201	psched->context[ltid].slot[CTX_TRDID_ID],
1202	psched->context[ltid].slot[CTX_SR_ID],
1203	psched->context[ltid].slot[CTX_SP_ID],
1204	psched->context[ltid].slot[CTX_ENTRY_ID],
1205	psched->context[ltid].slot[CTX_PTPR_ID],
1206	psched->context[ltid].slot[CTX_PTAB_ID],
1207	psched->context[ltid].slot[CTX_NPT2_ID],
1208	psched->context[ltid].slot[CTX_VSID_ID],
1209	psched->context[ltid].slot[CTX_NORUN_ID],
1210	psched->context[ltid].slot[CTX_SIGS_ID] );
1211	#endif
1212	} // end loop on threads
1213	} // end loop on vspaces
1214	} // end boot_scheduler_init()
1215
1216
1217
1218	//////////////////////////////////////////////////////////////////////////////////
1219	// This function loads the map.bin file from block device.
1220	//////////////////////////////////////////////////////////////////////////////////
1221	void boot_mapping_init()
1222	{
1223
1224	#if BOOT_DEBUG_MAPPING
1225	_printf("\n[BOOT DEBUG] boot_mapping_init() : enter\n");
1226	#endif
1227
1228	// load map.bin file into buffer
1229	if ( _fat_load_no_cache( "map.bin",
1230	SEG_BOOT_MAPPING_BASE,
1231	SEG_BOOT_MAPPING_SIZE ) )
1232	{
1233	_printf("\n[BOOT ERROR] : map.bin file not found \n");
1234	_exit();
1235	}
1236
1237	// check mapping signature, number of clusters, number of vspaces
1238	mapping_header_t * header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
1239	if ( (header->signature != IN_MAPPING_SIGNATURE) \|\|
1240	(header->x_size != X_SIZE) \|\|
1241	(header->y_size != Y_SIZE) \|\|
1242	(header->vspaces > GIET_NB_VSPACE_MAX) )
1243	{
1244	_printf("\n[BOOT ERROR] Illegal mapping : signature = %x\n", header->signature );
1245	_exit();
1246	}
1247
1248	#if BOOT_DEBUG_MAPPING
1249	unsigned int line;
1250	unsigned int* pointer = (unsigned int*)SEG_BOOT_MAPPING_BASE;
1251	_printf("\n[BOOT] First block of mapping\n");
1252	for ( line = 0 ; line < 8 ; line++ )
1253	{
1254	_printf(" \| %X \| %X \| %X \| %X \| %X \| %X \| %X \| %X \|\n",
1255	*(pointer + 0),
1256	*(pointer + 1),
1257	*(pointer + 2),
1258	*(pointer + 3),
1259	*(pointer + 4),
1260	*(pointer + 5),
1261	*(pointer + 6),
1262	*(pointer + 7) );
1263
1264	pointer = pointer + 8;
1265	}
1266	#endif
1267
1268	} // end boot_mapping_init()
1269
1270
1271	///////////////////////////////////////////////////
1272	void boot_dma_copy( unsigned int cluster_xy,
1273	unsigned long long dst_paddr,
1274	unsigned long long src_paddr,
1275	unsigned int size )
1276	{
1277	// size must be multiple of 64 bytes
1278	if ( size & 0x3F ) size = (size & (~0x3F)) + 0x40;
1279
1280	unsigned int mode = MODE_DMA_NO_IRQ;
1281
1282	unsigned int src = 0;
1283	unsigned int src_lsb = (unsigned int)src_paddr;
1284	unsigned int src_msb = (unsigned int)(src_paddr>>32);
1285
1286	unsigned int dst = 1;
1287	unsigned int dst_lsb = (unsigned int)dst_paddr;
1288	unsigned int dst_msb = (unsigned int)(dst_paddr>>32);
1289
1290	// initializes src channel
1291	_mwr_set_channel_register( cluster_xy , src , MWR_CHANNEL_MODE , mode );
1292	_mwr_set_channel_register( cluster_xy , src , MWR_CHANNEL_SIZE , size );
1293	_mwr_set_channel_register( cluster_xy , src , MWR_CHANNEL_BUFFER_LSB , src_lsb );
1294	_mwr_set_channel_register( cluster_xy , src , MWR_CHANNEL_BUFFER_MSB , src_msb );
1295	_mwr_set_channel_register( cluster_xy , src , MWR_CHANNEL_RUNNING , 1 );
1296
1297	// initializes dst channel
1298	_mwr_set_channel_register( cluster_xy , dst , MWR_CHANNEL_MODE , mode );
1299	_mwr_set_channel_register( cluster_xy , dst , MWR_CHANNEL_SIZE , size );
1300	_mwr_set_channel_register( cluster_xy , dst , MWR_CHANNEL_BUFFER_LSB , dst_lsb );
1301	_mwr_set_channel_register( cluster_xy , dst , MWR_CHANNEL_BUFFER_MSB , dst_msb );
1302	_mwr_set_channel_register( cluster_xy , dst , MWR_CHANNEL_RUNNING , 1 );
1303
1304	// start CPY coprocessor (write non-zero value into config register)
1305	_mwr_set_coproc_register( cluster_xy, 0 , 1 );
1306
1307	// poll dst channel status register to detect completion
1308	unsigned int status;
1309	do
1310	{
1311	status = _mwr_get_channel_register( cluster_xy , dst , MWR_CHANNEL_STATUS );
1312	} while ( status == MWR_CHANNEL_BUSY );
1313
1314	if ( status )
1315	{
1316	_printf("\n[BOOT ERROR] in boot_dma_copy()\n");
1317	_exit();
1318	}
1319
1320	// stop CPY coprocessor and DMA channels
1321	_mwr_set_channel_register( cluster_xy , src , MWR_CHANNEL_RUNNING , 0 );
1322	_mwr_set_channel_register( cluster_xy , dst , MWR_CHANNEL_RUNNING , 0 );
1323	_mwr_set_coproc_register ( cluster_xy , 0 , 0 );
1324
1325	} // end boot_dma_copy()
1326
1327	//////////////////////////////////////////////////////////////////////////////////
1328	// This function load all loadable segments contained in the .elf file identified
1329	// by the "pathname" argument. Some loadable segments can be copied in several
1330	// clusters: same virtual address but different physical addresses.
1331	// - It open the file.
1332	// - It loads the complete file in the dedicated _boot_elf_buffer.
1333	// - It copies each loadable segments at the virtual address defined in
1334	// the .elf file, making several copies if the target vseg is not local.
1335	// - It closes the file.
1336	// This function is supposed to be executed by all processors[x,y,0].
1337	//
1338	// Note: We must use physical addresses to reach the destination buffers that
1339	// can be located in remote clusters. We use either a _physical_memcpy(),
1340	// or a _dma_physical_copy() if DMA is available.
1341	//////////////////////////////////////////////////////////////////////////////////
1342	void load_one_elf_file( unsigned int is_kernel, // kernel file if non zero
1343	char* pathname,
1344	unsigned int vspace_id ) // to scan the proper vspace
1345	{
1346	mapping_header_t * header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
1347	mapping_vspace_t * vspace = _get_vspace_base(header);
1348	mapping_vseg_t * vseg = _get_vseg_base(header);
1349
1350	unsigned int procid = _get_procid();
1351	unsigned int cxy = procid >> P_WIDTH;
1352	unsigned int x = cxy >> Y_WIDTH;
1353	unsigned int y = cxy & ((1<<Y_WIDTH)-1);
1354	unsigned int p = procid & ((1<<P_WIDTH)-1);
1355
1356	#if BOOT_DEBUG_ELF
1357	_printf("\n[DEBUG BOOT_ELF] load_one_elf_file() : P[%d,%d,%d] enters for %s\n",
1358	x , y , p , pathname );
1359	#endif
1360
1361	Elf32_Ehdr* elf_header_ptr = NULL; // avoid a warning
1362
1363	// only P[0,0,0] load file
1364	if ( (cxy == 0) && (p == 0) )
1365	{
1366	if ( _fat_load_no_cache( pathname,
1367	(unsigned int)_boot_elf_buffer,
1368	GIET_ELF_BUFFER_SIZE ) )
1369	{
1370	_printf("\n[BOOT ERROR] in load_one_elf_file() : %s\n", pathname );
1371	_exit();
1372	}
1373
1374	// Check ELF Magic Number in ELF header
1375	Elf32_Ehdr* ptr = (Elf32_Ehdr*)_boot_elf_buffer;
1376
1377	if ( (ptr->e_ident[EI_MAG0] != ELFMAG0) \|\|
1378	(ptr->e_ident[EI_MAG1] != ELFMAG1) \|\|
1379	(ptr->e_ident[EI_MAG2] != ELFMAG2) \|\|
1380	(ptr->e_ident[EI_MAG3] != ELFMAG3) )
1381	{
1382	_printf("\n[BOOT ERROR] load_one_elf_file() : %s not ELF format\n",
1383	pathname );
1384	_exit();
1385	}
1386
1387	#if BOOT_DEBUG_ELF
1388	_printf("\n[DEBUG BOOT_ELF] load_one_elf_file() : P[%d,%d,%d] load %s at cycle %d\n",
1389	x , y , p , pathname , _get_proctime() );
1390	#endif
1391
1392	} // end if P[0,0,0]
1393
1394	//////////////////////////////////////////////
1395	_simple_barrier_wait( &_barrier_all_clusters );
1396	//////////////////////////////////////////////
1397
1398	// Each processor P[x,y,0] copy replicated segments in cluster[x,y]
1399	elf_header_ptr = (Elf32_Ehdr*)_boot_elf_buffer;
1400
1401	// get program header table pointer
1402	unsigned int offset = elf_header_ptr->e_phoff;
1403	if( offset == 0 )
1404	{
1405	_printf("\n[BOOT ERROR] load_one_elf_file() : file %s "
1406	"does not contain loadable segment\n", pathname );
1407	_exit();
1408	}
1409
1410	Elf32_Phdr* elf_pht_ptr = (Elf32_Phdr*)(_boot_elf_buffer + offset);
1411
1412	// get number of segments
1413	unsigned int nsegments = elf_header_ptr->e_phnum;
1414
1415	// First loop on loadable segments in the .elf file
1416	unsigned int seg_id;
1417	for (seg_id = 0 ; seg_id < nsegments ; seg_id++)
1418	{
1419	if(elf_pht_ptr[seg_id].p_type == PT_LOAD)
1420	{
1421	// Get segment attributes
1422	unsigned int seg_vaddr = elf_pht_ptr[seg_id].p_vaddr;
1423	unsigned int seg_offset = elf_pht_ptr[seg_id].p_offset;
1424	unsigned int seg_filesz = elf_pht_ptr[seg_id].p_filesz;
1425	unsigned int seg_memsz = elf_pht_ptr[seg_id].p_memsz;
1426
1427	if( seg_memsz != seg_filesz )
1428	{
1429	_printf("\n[BOOT ERROR] load_one_elf_file() : segment at vaddr = %x\n"
1430	" in file %s has memsize = %x / filesize = %x \n"
1431	" check that all global variables are in data segment\n",
1432	seg_vaddr, pathname , seg_memsz , seg_filesz );
1433	_exit();
1434	}
1435
1436	unsigned int src_vaddr = (unsigned int)_boot_elf_buffer + seg_offset;
1437
1438	// search all vsegs matching the virtual address
1439	unsigned int vseg_first;
1440	unsigned int vseg_last;
1441	unsigned int vseg_id;
1442	unsigned int found = 0;
1443	if ( is_kernel )
1444	{
1445	vseg_first = 0;
1446	vseg_last = header->globals;
1447	}
1448	else
1449	{
1450	vseg_first = vspace[vspace_id].vseg_offset;
1451	vseg_last = vseg_first + vspace[vspace_id].vsegs;
1452	}
1453
1454	// Second loop on vsegs in the mapping
1455	for ( vseg_id = vseg_first ; vseg_id < vseg_last ; vseg_id++ )
1456	{
1457	if ( seg_vaddr == vseg[vseg_id].vbase ) // matching
1458	{
1459	found = 1;
1460
1461	// get destination buffer physical address, size, coordinates
1462	paddr_t seg_paddr = vseg[vseg_id].pbase;
1463	unsigned int seg_size = vseg[vseg_id].length;
1464	unsigned int cluster_xy = (unsigned int)(seg_paddr>>32);
1465	unsigned int cx = cluster_xy >> Y_WIDTH;
1466	unsigned int cy = cluster_xy & ((1<<Y_WIDTH)-1);
1467
1468	// check vseg size
1469	if ( seg_size < seg_filesz )
1470	{
1471	_printf("\n[BOOT ERROR] in load_one_elf_file() : vseg %s "
1472	"is too small for segment %x\n"
1473	" file = %s / vseg_size = %x / seg_file_size = %x\n",
1474	vseg[vseg_id].name , seg_vaddr , pathname,
1475	seg_size , seg_filesz );
1476	_exit();
1477	}
1478
1479	// P[x,y,0] copy the segment from boot buffer in cluster[0,0]
1480	// to destination buffer in cluster[x,y], using DMA if available
1481	if ( (cx == x) && (cy == y) )
1482	{
1483	if( USE_MWR_CPY )
1484	{
1485	boot_dma_copy( cluster_xy, // DMA in cluster[x,y]
1486	seg_paddr,
1487	(paddr_t)src_vaddr,
1488	seg_filesz );
1489	#if BOOT_DEBUG_ELF
1490	_printf("\n[DEBUG BOOT_ELF] load_one_elf_file() : DMA[%d,%d] copy segment %d :\n"
1491	" vaddr = %x / size = %x / paddr = %l\n",
1492	x , y , seg_id , seg_vaddr , seg_memsz , seg_paddr );
1493	#endif
1494	}
1495	else
1496	{
1497	_physical_memcpy( seg_paddr, // dest paddr
1498	(paddr_t)src_vaddr, // source paddr
1499	seg_filesz ); // size
1500	#if BOOT_DEBUG_ELF
1501	_printf("\n[DEBUG BOOT_ELF] load_one_elf_file() : P[%d,%d,%d] copy segment %d :\n"
1502	" vaddr = %x / size = %x / paddr = %l\n",
1503	x , y , p , seg_id , seg_vaddr , seg_memsz , seg_paddr );
1504	#endif
1505	}
1506	}
1507	}
1508	} // end for vsegs
1509
1510	// check at least one matching vseg
1511	if ( found == 0 )
1512	{
1513	_printf("\n[BOOT ERROR] in load_one_elf_file() : vseg for loadable "
1514	"segment %x in file %s not found "
1515	"check consistency between the .py and .ld files\n",
1516	seg_vaddr, pathname );
1517	_exit();
1518	}
1519	}
1520	} // end for loadable segments
1521
1522	//////////////////////////////////////////////
1523	_simple_barrier_wait( &_barrier_all_clusters );
1524	//////////////////////////////////////////////
1525
1526	// only P[0,0,0] signals completion
1527	if ( (cxy == 0) && (p == 0) )
1528	{
1529	_printf("\n[BOOT] File %s loaded at cycle %d\n",
1530	pathname , _get_proctime() );
1531	}
1532
1533	} // end load_one_elf_file()
1534
1535
1536	/////i////////////////////////////////////////////////////////////////////////////////
1537	// This function uses the map.bin data structure to load the "kernel.elf" file
1538	// as well as the various "application.elf" files into memory.
1539	// - The "preloader.elf" file is not loaded, because it has been burned in the ROM.
1540	// - The "boot.elf" file is not loaded, because it has been loaded by the preloader.
1541	// This function scans all vsegs defined in the map.bin data structure to collect
1542	// all .elf files pathnames, and calls the load_one_elf_file() for each .elf file.
1543	// As the code can be replicated in several vsegs, the same code can be copied
1544	// in one or several clusters by the load_one_elf_file() function.
1545	//////////////////////////////////////////////////////////////////////////////////////
1546	void boot_elf_load()
1547	{
1548	mapping_header_t* header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
1549	mapping_vspace_t* vspace = _get_vspace_base( header );
1550	mapping_vseg_t* vseg = _get_vseg_base( header );
1551
1552	unsigned int vspace_id;
1553	unsigned int vseg_id;
1554	unsigned int found;
1555
1556	// Scan all global vsegs to find the pathname to the kernel.elf file
1557	found = 0;
1558	for( vseg_id = 0 ; vseg_id < header->globals ; vseg_id++ )
1559	{
1560	if(vseg[vseg_id].type == VSEG_TYPE_ELF)
1561	{
1562	found = 1;
1563	break;
1564	}
1565	}
1566
1567	// We need one kernel.elf file
1568	if (found == 0)
1569	{
1570	_printf("\n[BOOT ERROR] boot_elf_load() : kernel.elf file not found\n");
1571	_exit();
1572	}
1573
1574	// Load the kernel
1575	load_one_elf_file( 1, // kernel file
1576	vseg[vseg_id].binpath, // file pathname
1577	0 ); // vspace 0
1578
1579	// loop on the vspaces, scanning all vsegs in the vspace,
1580	// to find the pathname of the .elf file associated to the vspace.
1581	for( vspace_id = 0 ; vspace_id < header->vspaces ; vspace_id++ )
1582	{
1583	// loop on the private vsegs
1584	unsigned int found = 0;
1585	for (vseg_id = vspace[vspace_id].vseg_offset;
1586	vseg_id < (vspace[vspace_id].vseg_offset + vspace[vspace_id].vsegs);
1587	vseg_id++)
1588	{
1589	if(vseg[vseg_id].type == VSEG_TYPE_ELF)
1590	{
1591	found = 1;
1592	break;
1593	}
1594	}
1595
1596	// We want one .elf file per vspace
1597	if (found == 0)
1598	{
1599	_printf("\n[BOOT ERROR] boot_elf_load() : "
1600	".elf file not found for vspace %s\n", vspace[vspace_id].name );
1601	_exit();
1602	}
1603
1604	load_one_elf_file( 0, // not a kernel file
1605	vseg[vseg_id].binpath, // file pathname
1606	vspace_id ); // vspace index
1607
1608	} // end for vspaces
1609
1610	} // end boot_elf_load()
1611
1612
1613	/////////////////////////////////////////////////////////////////////////////////
1614	// This function is executed in parallel by all processors[x][y][0].
1615	// It initialises the physical memory allocator in each cluster containing
1616	// a RAM pseg.
1617	/////////////////////////////////////////////////////////////////////////////////
1618	void boot_pmem_init( unsigned int cx,
1619	unsigned int cy )
1620	{
1621	mapping_header_t* header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
1622	mapping_cluster_t* cluster = _get_cluster_base(header);
1623	mapping_pseg_t* pseg = _get_pseg_base(header);
1624
1625	unsigned int pseg_id;
1626	unsigned int procid = _get_procid();
1627	unsigned int lpid = procid & ((1<<P_WIDTH)-1);
1628
1629	if( lpid )
1630	{
1631	_printf("\n[BOOT ERROR] boot_pmem_init() : "
1632	"P[%d][%d][%d] should not execute it\n", cx, cy, lpid );
1633	_exit();
1634	}
1635
1636	// scan the psegs in local cluster to find pseg of type RAM
1637	unsigned int found = 0;
1638	unsigned int cluster_id = cx * Y_SIZE + cy;
1639	unsigned int pseg_min = cluster[cluster_id].pseg_offset;
1640	unsigned int pseg_max = pseg_min + cluster[cluster_id].psegs;
1641
1642	for ( pseg_id = pseg_min ; pseg_id < pseg_max ; pseg_id++ )
1643	{
1644	if ( pseg[pseg_id].type == PSEG_TYPE_RAM )
1645	{
1646	unsigned int base = (unsigned int)pseg[pseg_id].base;
1647	unsigned int size = (unsigned int)pseg[pseg_id].length;
1648	_pmem_alloc_init( cx, cy, base, size );
1649	found = 1;
1650
1651	#if BOOT_DEBUG_PT
1652	_printf("\n[BOOT] pmem allocator initialised in cluster[%d][%d]"
1653	" : base = %x / size = %x\n", cx , cy , base , size );
1654	#endif
1655	break;
1656	}
1657	}
1658
1659	if ( found == 0 )
1660	{
1661	_printf("\n[BOOT ERROR] boot_pmem_init() : no RAM in cluster[%d][%d]\n",
1662	cx , cy );
1663	_exit();
1664	}
1665	} // end boot_pmem_init()
1666
1667	/////////////////////////////////////////////////////////////////////////
1668	// This function is the entry point of the boot code for all processors.
1669	/////////////////////////////////////////////////////////////////////////
1670	void boot_init()
1671	{
1672
1673	unsigned int gpid = _get_procid();
1674	unsigned int cx = gpid >> (Y_WIDTH + P_WIDTH);
1675	unsigned int cy = (gpid >> P_WIDTH) & ((1<<Y_WIDTH)-1);
1676	unsigned int lpid = gpid & ((1 << P_WIDTH) -1);
1677
1678	//////////////////////////////////////////////////////////
1679	// Phase ONE : only P[0][0][0] execute it
1680	//////////////////////////////////////////////////////////
1681	if ( gpid == 0 )
1682	{
1683	unsigned int cid; // index for loop on clusters
1684
1685	// initialises the TTY0 spin lock
1686	_spin_lock_init( &_tty0_spin_lock );
1687
1688	_printf("\n[BOOT] P[0,0,0] starts at cycle %d\n", _get_proctime() );
1689
1690	// initialise the MMC locks array
1691	_mmc_boot_mode = 1;
1692	_mmc_init_locks();
1693
1694	// initialises the IOC peripheral
1695	if ( USE_IOC_BDV != 0 ) _bdv_init();
1696	else if ( USE_IOC_HBA != 0 ) _hba_init();
1697	else if ( USE_IOC_SDC != 0 ) _sdc_init();
1698	else if ( USE_IOC_RDK == 0 )
1699	{
1700	_printf("\n[BOOT ERROR] boot_init() : no IOC peripheral\n");
1701	_exit();
1702	}
1703
1704	// initialises the FAT
1705	_fat_init( 0 ); // don't use Inode-Tree, Fat-Cache, etc.
1706
1707	_printf("\n[BOOT] FAT initialised at cycle %d\n", _get_proctime() );
1708
1709	// Load the map.bin file into memory
1710	boot_mapping_init();
1711
1712	mapping_header_t* header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
1713	mapping_cluster_t* cluster = _get_cluster_base(header);
1714
1715	_printf("\n[BOOT] Mapping %s at cycle %d\n",
1716	header->name , _get_proctime() );
1717
1718	// initialises the barrier for all clusters containing processors
1719	unsigned int nclusters = 0;
1720	for ( cid = 0 ; cid < X_SIZE*Y_SIZE ; cid++ )
1721	{
1722	if ( cluster[cid].procs ) nclusters++ ;
1723	}
1724
1725	_simple_barrier_init( &_barrier_all_clusters , nclusters );
1726
1727	// wake up all processors P[x][y][0]
1728	for ( cid = 1 ; cid < X_SIZE*Y_SIZE ; cid++ )
1729	{
1730	unsigned int x = cluster[cid].x;
1731	unsigned int y = cluster[cid].y;
1732	unsigned int cluster_xy = (x << Y_WIDTH) + y;
1733
1734	if ( cluster[cid].procs )
1735	{
1736	unsigned long long paddr = (((unsigned long long)cluster_xy)<<32) +
1737	SEG_XCU_BASE+XCU_REG( XCU_WTI_REG , 0 );
1738
1739	_physical_write( paddr , (unsigned int)boot_entry );
1740	}
1741	}
1742
1743	_printf("\n[BOOT] Processors P[x,y,0] start at cycle %d\n",
1744	_get_proctime() );
1745	}
1746
1747	/////////////////////////////////////////////////////////////////
1748	// Phase TWO : All processors P[x][y][0] execute it in parallel
1749	/////////////////////////////////////////////////////////////////
1750	if( lpid == 0 )
1751	{
1752	// Initializes physical memory allocator in cluster[cx][cy]
1753	boot_pmem_init( cx , cy );
1754
1755	// Build page table in cluster[cx][cy]
1756	boot_ptab_init( cx , cy );
1757
1758	//////////////////////////////////////////////
1759	_simple_barrier_wait( &_barrier_all_clusters );
1760	//////////////////////////////////////////////
1761
1762	// P[0][0][0] complete page tables with vsegs
1763	// mapped in clusters without processors
1764	if ( gpid == 0 )
1765	{
1766	// complete page tables initialisation
1767	boot_ptab_extend();
1768
1769	_printf("\n[BOOT] Page tables"
1770	" initialized at cycle %d\n", _get_proctime() );
1771	}
1772
1773	//////////////////////////////////////////////
1774	_simple_barrier_wait( &_barrier_all_clusters );
1775	//////////////////////////////////////////////
1776
1777	// All processors P[x,y,0] activate MMU (using local PTAB)
1778	_set_mmu_ptpr( (unsigned int)(_ptabs_paddr[0][cx][cy]>>13) );
1779	_set_mmu_mode( 0xF );
1780
1781	// Each processor P[x,y,0] initialises all schedulers in cluster[x,y]
1782	boot_scheduler_init( cx , cy );
1783
1784	// Each processor P[x][y][0] initialises its CP0_SCHED register
1785	_set_sched( (unsigned int)_schedulers[cx][cy][0] );
1786
1787	//////////////////////////////////////////////
1788	_simple_barrier_wait( &_barrier_all_clusters );
1789	//////////////////////////////////////////////
1790
1791	if ( gpid == 0 )
1792	{
1793	_printf("\n[BOOT] Schedulers initialised at cycle %d\n",
1794	_get_proctime() );
1795	}
1796
1797	// All processor P[x,y,0] contributes to load .elf files into clusters.
1798	boot_elf_load();
1799
1800	//////////////////////////////////////////////
1801	_simple_barrier_wait( &_barrier_all_clusters );
1802	//////////////////////////////////////////////
1803
1804	// Each processor P[x][y][0] wake up other processors in same cluster
1805	mapping_header_t* header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
1806	mapping_cluster_t* cluster = _get_cluster_base(header);
1807	unsigned int cluster_xy = (cx << Y_WIDTH) + cy;
1808	unsigned int cluster_id = (cx * Y_SIZE) + cy;
1809	unsigned int p;
1810	for ( p = 1 ; p < cluster[cluster_id].procs ; p++ )
1811	{
1812	_xcu_send_wti( cluster_xy , p , (unsigned int)boot_entry );
1813	}
1814
1815	// only P[0][0][0] makes display
1816	if ( gpid == 0 )
1817	{
1818	_printf("\n[BOOT] All processors start at cycle %d\n",
1819	_get_proctime() );
1820	}
1821	}
1822	// All other processors activate MMU (using local PTAB)
1823	if ( lpid != 0 )
1824	{
1825	_set_mmu_ptpr( (unsigned int)(_ptabs_paddr[0][cx][cy]>>13) );
1826	_set_mmu_mode( 0xF );
1827	}
1828
1829	// All processors set CP0_SCHED register
1830	_set_sched( (unsigned int)_schedulers[cx][cy][lpid] );
1831
1832	// All processors reset BEV bit in SR to use GIET_VM exception handler
1833	_set_sr( 0 );
1834
1835	// Each processor get kernel entry virtual address
1836	unsigned int kernel_entry = 0x80000000;
1837
1838	#if BOOT_DEBUG_ELF
1839	_printf("\n[DEBUG BOOT_ELF] P[%d,%d,%d] exit boot & jump to %x at cycle %d\n",
1840	cx, cy, lpid, kernel_entry , _get_proctime() );
1841	#endif
1842
1843	// All processors jump to kernel_init
1844	asm volatile( "jr %0" ::"r"(kernel_entry) );
1845
1846	} // end boot_init()
1847
1848
1849	// Local Variables:
1850	// tab-width: 4
1851	// c-basic-offset: 4
1852	// c-file-offsets:((innamespace . 0)(inline-open . 0))
1853	// indent-tabs-mode: nil
1854	// End:
1855	// vim: filetype=c:expandtab:shiftwidth=4:tabstop=4:softtabstop=4
1856

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: soft/giet_vm/giet_boot/boot.c @ 819

Download in other formats: