source: soft/giet_vm/giet_drivers/ioc_driver.c @ 289

///////////////////////////////////////////////////////////////////////////////////
// File       : ioc_driver.c
// Date       : 23/05/2013
// Author     : alain greiner
// Maintainer : cesar fuguet
// Copyright (c) UPMC-LIP6
///////////////////////////////////////////////////////////////////////////////////
// The ioc_driver.c and ioc_driver.h files are part ot the GIET-VM kernel.
// This driver supports the SocLib vci_block_device component, that is
// a single channel, block oriented, external storage contrÃŽler.
//
// It can exist only one block-device controler in the architecture.
//
// The _ioc_read() and _ioc_write() functions use the _ioc_access() function,
// that is always blocking. The _ioc_access function will call the read or
// write function in the driver of the choosen IOC peripheral, which can be for
// now: BDV, HBA and SPI. This function can be called in 4 modes:
//
// - In BOOT_PA mode, the _ioc_access() function use the buffer virtual address
//   as a physical address (as the page tables are not build). This mode is
//   used by the boot code to load the map.bin file into memory.
//
// - In BOOT_VA mode, the _ioc_access() function makes a V2P translation to
//   compute the buffer physical address. This mode is used by the boot code to
//   load the various .elf files into memory.
//
// - In KERNEL mode, the _ioc_access() function makes a V2P translation to
//   compute the buffer physical address. There is no checking of user access
//   right to the memory buffer.  This mode must be used to access IOC, for an
//   "open" system call.
//
// - In USER mode, the _ioc_access() function makes a V2P translation to
//   compute the buffer physical address. The user access right to the memory
//   buffer must be checked.  This mode must be used to access IOC, for a
//   "read/write" system call.
//
// The IOMMU can be activated or not:
// 
// 1) When the IOMMU is used, a fixed size 2Mbytes vseg is allocated to 
// the IOC peripheral, in the I/O virtual space, and the user buffer is
// dynamically remapped in the IOMMU page table. The corresponding entry 
// in the IOMMU PT1 is defined by the kernel _ioc_iommu_ix1 variable.
// The number of pages to be unmapped is stored in the _ioc_npages variable.
// The number of PT2 entries is dynamically computed and stored in the
// kernel _ioc_iommu_npages variable. It cannot be larger than 512.
// The user buffer is unmapped by the _ioc_completed() function when 
// the transfer is completed.
//
// 2/ If the IOMMU is not used, we check that  the user buffer is mapped to a
// contiguous physical buffer (this is generally true because the user space
// page tables are statically constructed to use contiguous physical memory).
//
// Finally, the memory buffer must fulfill the following conditions:
// - The buffer must be word aligned, 
// - The buffer must be mapped in user space for an user access, 
// - The buffer must be writable in case of (to_mem) access,
// - The total number of physical pages occupied by the user buffer cannot
//   be larger than 512 pages if the IOMMU is activated,
// - All physical pages occupied by the user buffer must be contiguous
//   if the IOMMU is not activated.
// An error code is returned if these conditions are not verified.
///////////////////////////////////////////////////////////////////////////////////
// The seg_ioc_base virtual base addresses must be defined in giet_vsegs.ld file.
///////////////////////////////////////////////////////////////////////////////////

#include <giet_config.h>
#include <ioc_driver.h>
#include <utils.h>
#include <tty_driver.h>
#include <iob_driver.h>
#include <ctx_handler.h>
#include <mmc_driver.h>
#include <vmem.h>

#if !defined( USE_IOB )
# error: You must define USE_IOB in the hard_config.h file
#endif

#if !defined(GIET_USE_IOMMU) 
# error: You must define GIET_USE_IOMMU in the giet_config.h file
#endif

#if (USE_BDV + USE_SPI + USE_HBA) != 1
# error: You must use only one IOC controller (BDV or SPI or HBA)
#endif

#if USE_BDV
# include <bdv_driver.h>
#endif

#if USE_SPI
# include <sdc_driver.h>
#endif

#if USE_HBA
# include <hba_driver.h>
#endif


#define in_unckdata __attribute__((section (".unckdata")))

///////////////////// IOC global variables

in_unckdata unsigned int _ioc_lock = 0;
in_unckdata unsigned int _ioc_status = 0;
in_unckdata volatile unsigned int _ioc_gtid;
in_unckdata volatile unsigned int _ioc_iommu_ix1 = 0;
in_unckdata volatile unsigned int _ioc_iommu_npages; 

///////////////////////////////////////////////////////////////////////////////
//      _ioc_access()
// This function transfer data between a memory buffer and the block device.
// The buffer lentgth is (count*block_size) bytes.
// Arguments are:
// - to_mem     : from external storage to memory when non 0.
// - kernel     : kernel buffer with identity mapping when non 0. 
// - lba        : first block index on the external storage.
// - buf_vaddr  : virtual base address of the memory buffer.
// - count      : number of blocks to be transfered.
// Returns 0 if success, > 0 if error.
///////////////////////////////////////////////////////////////////////////////
static unsigned int _ioc_access( unsigned int to_mem,
                                 unsigned int mode,
                                 unsigned int lba,
                                 unsigned int buf_vaddr,
                                 unsigned int count) 
{

#if GIET_DEBUG_IOC_DRIVER
_tty_get_lock( 0 );
_puts("\n[IOC DEBUG] Enter _ioc_access() at cycle ");
_putd( _get_proctime() );
_puts(" for processor ");
_putd( _get_procid() );
_puts("\n - mode    = ");
_putd( mode );
_puts("\n - vaddr   = ");
_putx( buf_vaddr );
_puts("\n - sectors = ");
_putd( count );
_puts("\n - lba     = ");
_putx( lba );
_puts("\n");
_tty_release_lock( 0 );
#endif

    unsigned int error;            // return value
    unsigned int pt_vbase;         // page table vbase address
    unsigned int vpn_min;          // first virtuel page index covering buffer
    unsigned int vpn_max;          // last virtual page index covering buffer
    unsigned int vpn;              // current virtual page index
    unsigned int ppn;              // physical page number
    unsigned int flags;            // page protection flags
    unsigned int ix2;              // page index in IOMMU PT1 page table
    unsigned int ppn_first;        // first physical page number for user buffer
    unsigned int buf_xaddr = 0;    // user buffer virtual address in IO space (if IOMMU)
    paddr_t      buf_paddr = 0;    // user buffer physical address (if no IOMMU),

    // check buffer alignment
    if ((unsigned int) buf_vaddr & 0x3)
    {
        _tty_get_lock( 0 );
        _puts("\n[GIET ERROR] in _ioc_access() : buffer not word aligned\n");
        _tty_release_lock( 0 );
        return 1; 
    }

    unsigned int length = count << 9;  // count * 512 bytes

    // computing target buffer physical address
    if ( mode == IOC_BOOT_PA_MODE )                // identity mapping
    {
        buf_paddr = (paddr_t)buf_vaddr;
    }
    else                                           // V2P translation
    {
        // get page table virtual address
        pt_vbase = _get_context_slot(CTX_PTAB_ID);
        vpn_min = buf_vaddr >> 12;
        vpn_max = (buf_vaddr + length - 1) >> 12;

        // loop on all virtual pages covering the user buffer
        for (vpn = vpn_min, ix2 = 0 ; 
             vpn <= vpn_max ; 
             vpn++, ix2++ ) 
        {
            // get ppn and flags for each vpn
            unsigned int ko = _v2p_translate( (page_table_t*)pt_vbase,
                                              vpn,
                                              &ppn,
                                              &flags);
            // check access rights
            if ( ko )
            {
                _tty_get_lock( 0 );
                _puts("\n[GIET ERROR] in _ioc_access() : buffer unmapped\n");
                _tty_release_lock( 0 );
                return 1; 
            }

            if ( (mode == IOC_USER_MODE) && ((flags & PTE_U) == 0) )
            {
                _tty_get_lock( 0 );
                _puts("\n[GIET ERROR] in _ioc_access() : buffer not user accessible\n");
                _tty_release_lock( 0 );
                return 1; 
            }

            if ( ((flags & PTE_W) == 0 ) && to_mem )
            {
                _tty_get_lock( 0 );
                _puts("\n[GIET ERROR] in _ioc_access() : buffer not writable\n");
                _tty_release_lock( 0 );
                return 1; 
            }

            // save first ppn value
            if (ix2 == 0) ppn_first = ppn;

#if GIET_USE_IOMMU 
 
            // check buffer length < 2 Mbytes
            if (ix2 > 511) // check buffer length < 2 Mbytes
            {
                _tty_get_lock( 0 );
                _puts("\n[GIET ERROR] in _ioc_access() : user buffer > 2 Mbytes\n");
                _tty_release_lock( 0 );
                return 1; 
            }
            // map the physical page in IOMMU page table
            _iommu_add_pte2( _ioc_iommu_ix1,    // PT1 index
                             ix2,               // PT2 index
                             ppn,               // Physical page number    
                             flags );           // Protection flags

            // compute user buffer virtual adress in IO space
            buf_xaddr = (_ioc_iommu_ix1) << 21 | (buf_vaddr & 0xFFF);

#else

            // check that physical pages are contiguous
            if ((ppn - ppn_first) != ix2) 
            {
                _tty_get_lock( 0 );
                _puts("[GIET ERROR] in _ioc_access() : split physical buffer\n");
                _tty_release_lock( 0 );
                return 1; 
            }

            // compute user buffer physical adress
            buf_paddr = (((paddr_t)ppn_first) << 12) | (buf_vaddr & 0xFFF);
#endif            

        } // end for vpn
    }

#if GIET_USE_IOMMU 

    // register the number of pages to be unmapped in IOMMU
    _ioc_iommu_npages = (vpn_max - vpn_min) + 1;

#endif

    if ( to_mem ) // memory write : invalidate data caches 
    {
        // L1 cache
        if ( GIET_NO_HARD_CC ) _dcache_buf_invalidate((void *) buf_vaddr, length);

        // L2 cache (only if IOB used)
        if ( USE_IOB ) _memc_inval( buf_paddr, length );
    }
    else         // memory read : update data caches
    {
        // L1 cache : nothing to do if L1 write-through

        // L2 cache (only if IOB used)
        if ( USE_IOB ) _memc_sync( buf_paddr, length );
    }

    if ( GIET_USE_IOMMU ) buf_paddr = (paddr_t) buf_xaddr;

#if   USE_BDV
    if (to_mem) error = _bdv_read (mode, lba, buf_paddr, count);
    else        error = _bdv_write(mode, lba, buf_paddr, count);
#elif USE_SPI
    if (to_mem) error = _sdc_read (mode, lba, buf_paddr, count);
    else        error = _sdc_write(mode, lba, buf_paddr, count);
#elif USE_HBA
    if (to_mem) error = _hba_read (mode, lba, buf_paddr, count);
    else        error = _hba_write(mode, lba, buf_paddr, count);
#endif

    return error;
} // end _ioc_access()

///////////////////////////////////////////////////////////////////////////////
//       _ioc_init()
// This function cheks block size, and activates the IOC interrupts.
// Return 0 for success.
///////////////////////////////////////////////////////////////////////////////
unsigned int _ioc_init( unsigned int channel )
{
#if   USE_BDV
    return _bdv_init( channel );
#elif USE_SPI
    return _sdc_init( channel );
#elif USE_HBA
    return _hba_init( channel );
#endif
}

///////////////////////////////////////////////////////////////////////////////
//     _ioc_read()
// Transfer data from the block device to a memory buffer. 
// - mode     : BOOT / KERNEL / USER
// - lba      : first block index on the block device
// - buffer   : base address of the memory buffer (must be word aligned)
// - count    : number of blocks to be transfered.
// Returns 0 if success, > 0 if error.
///////////////////////////////////////////////////////////////////////////////
unsigned int _ioc_read( unsigned int mode,  
                        unsigned int lba, 
                        void*        buffer, 
                        unsigned int count) 
{
    return _ioc_access( 1,        // read access
                        mode,  
                        lba,
                        (unsigned int) buffer,
                        count );
}

///////////////////////////////////////////////////////////////////////////////
//     _ioc_write()
// Transfer data from a memory buffer to the block device. 
// - mode     : BOOT / KERNEL / USER
// - lba      : first block index on the block device
// - buffer   : base address of the memory buffer (must be word aligned)
// - count    : number of blocks to be transfered.
// Returns 0 if success, > 0 if error.
///////////////////////////////////////////////////////////////////////////////
unsigned int _ioc_write( unsigned int mode,  
                         unsigned int lba, 
                         const void*  buffer, 
                         unsigned int count ) 
{
    return _ioc_access( 0,        // write access
                        mode,  
                        lba,
                        (unsigned int) buffer,
                        count );
}

///////////////////////////////////////////////////////////////////////////////
//     _ioc_get_status()
// This function returns in the status variable, the transfert status, and
// acknowledge the IRQ if the IOC controler is not busy.
// Returns 0 if success, > 0 if error
///////////////////////////////////////////////////////////////////////////////
unsigned int _ioc_get_status( unsigned int  channel,
                              unsigned int* status )
{
#if   USE_BDV
    return _bdv_get_status(channel, status);
#elif USE_SPI
    return _sdc_get_status(channel, status);
#elif USE_HBA
    return _hba_get_status(channel, status);
#endif
}

///////////////////////////////////////////////////////////////////////////////
//     _ioc_get_block_size()
// This function returns the block_size with which the IOC has been configured.
///////////////////////////////////////////////////////////////////////////////
unsigned int _ioc_get_block_size() 
{
#if   USE_BDV
    return _bdv_get_block_size();
#elif USE_SPI
    return _sdc_get_block_size();
#elif USE_HBA
    return _hba_get_block_size();
#endif
}


// Local Variables:
// tab-width: 4
// c-basic-offset: 4
// c-file-offsets:((innamespace . 0)(inline-open . 0))
// indent-tabs-mode: nil
// End:
// vim: filetype=c:expandtab:shiftwidth=4:tabstop=4:softtabstop=4