source: soft/giet_vm/giet_drivers/tty_driver.c @ 285

///////////////////////////////////////////////////////////////////////////////////
// File     : tty_driver.c
// Date     : 23/05/2013
// Author   : alain greiner
// Copyright (c) UPMC-LIP6
///////////////////////////////////////////////////////////////////////////////////
// The tty_driver.c and tty_drivers.h files are part ot the GIET-VM kernel.
// This driver supports the SocLib vci_multi_tty component.
//
// It can exist only one multi_tty controler in the architecture.
//
// The total number of TTY terminals must be defined by the configuration 
// parameter NB_TTY_CHANNELS in the hard_config.h file.
//
// The register offsets must be defined in the hwr_mapping.h file.
//
// The "system" terminal is TTY[0].
// The "user" TTYs are allocated to applications by the GIET in the boot phase,
// as defined in the mapping_info data structure. The corresponding tty_id must 
// be stored in the context of the task by the boot code.
///////////////////////////////////////////////////////////////////////////////////
// The virtual base address of the segment associated to a channel is: 
//
//                  seg_tty_base  + TTY_SPAN * channel_id
//
// The seg_tty_base virtual base addresses must be defined in giet_vsegs.ld file.
///////////////////////////////////////////////////////////////////////////////////

#include <giet_config.h>
#include <tty_driver.h>
#include <ctx_handler.h>
#include <utils.h>

#if !defined(NB_TTY_CHANNELS)
# error: You must define NB_TTY_CHANNELS in the hard_config.h file
#endif

#if (NB_TTY_CHANNELS < 1)
# error: NB_TTY_CHANNELS cannot be smaller than 1!
#endif

#define in_unckdata __attribute__((section (".unckdata")))

/////////////////   TTY global variables
in_unckdata volatile unsigned char _tty_get_buf[NB_TTY_CHANNELS];
in_unckdata volatile unsigned char _tty_get_full[NB_TTY_CHANNELS] 
                                     = { [0 ... NB_TTY_CHANNELS - 1] = 0 };

/////////////////////////////////////////////////////////////////////////////////
// This non-blocking function writes a character string from a fixed-length 
// buffer to the TTY_WRITE register of a TTY terminal identified by the
// channel argument. If the channel argument is 0xFFFFFFFF, the channel 
// index is obtained from the current taxk context. 
// It doesn't use any interrupt.
// This is a non blocking call: it tests the TTY_STATUS register, and stops
// the transfer as soon as the TTY_STATUS[WRITE] bit is set. 
/////////////////////////////////////////////////////////////////////////////////
// Returns  the number of characters that have been written.
/////////////////////////////////////////////////////////////////////////////////
unsigned int _tty_write( const char*  buffer,    
                         unsigned int length,    // number of characters
                         unsigned int channel)   // channel index 
{
    unsigned int nwritten;
    unsigned int tty_id;
    unsigned int* tty_address = (unsigned int *) &seg_tty_base;

    // compute tty channel
    if( channel == 0xFFFFFFFF )
    {
        tty_id = _get_context_slot(CTX_TTY_ID);
    }
    else
    {
        tty_id = (unsigned int)channel;
    }

    // write string to TTY channel
    for (nwritten = 0; nwritten < length; nwritten++) 
    {
        // check tty's status 
        if ((tty_address[tty_id * TTY_SPAN + TTY_STATUS] & 0x2) == 0x2) break;
        _tty_write_data( tty_id, buffer[nwritten] );
    }
    return nwritten;
}

//////////////////////////////////////////////////////////////////////////////
// This non-blocking function fetches one character from the 
// terminal identified by the channel argument. If the channel argument 
// is 0xFFFFFFFF, the channel index is obtained from the current task context. 
// It uses the TTY_GET_IRQ[tty_id] interrupt and the buffer must have been
// filled by the TTY_ISR.
// It test the _tty_get_full[tty_id] register, read the _tty_get_buf[tty_id] 
// buffer, writes this character to the target buffer, and resets the
// _tty_get_full[tty_id] register.
// The length argument is not used.
//////////////////////////////////////////////////////////////////////////////
// Returns  the number of characters that have been read (0/1).
//////////////////////////////////////////////////////////////////////////////
unsigned int _tty_read( char*        buffer, 
                        unsigned int length,    // unused
                        unsigned int channel)   // channel index
{
    
    unsigned int tty_id;

    // compute tty channel
    if( channel == 0xFFFFFFFF )
    {
        tty_id = _get_context_slot(CTX_TTY_ID);
    }
    else
    {
        tty_id = (unsigned int)channel;
    }

    // read one character from TTY channel
    if (_tty_get_full[tty_id] == 0) 
    {
        return 0;
    }
    else 
    {
        *buffer = _tty_get_buf[tty_id];
        _tty_get_full[tty_id] = 0;
        return 1;
    }
}
//////////////////////////////////////////////////////////////////////////////

//////////////////////////////////////////////////////////////////////////////
// This function try to take the hardwired lock protecting exclusive access 
// to TTY terminal identified by the channel argument.
// It returns only when the lock has been successfully taken.
//////////////////////////////////////////////////////////////////////////////
void _tty_get_lock( unsigned int channel )
{
    unsigned int* tty_address = (unsigned int *) &seg_tty_base;

    if( channel >= NB_TTY_CHANNELS )
    {
        _puts("[GIET ERROR] in _tty_get_lock() : illegal TTY index\n");
        _exit();        
    }

    while ( tty_address[channel * TTY_SPAN + TTY_CONFIG] );
}

//////////////////////////////////////////////////////////////////////////////
// This function releases the hardwired lock protecting exclusive access 
// to TTY terminal identified by the channel argument.
//////////////////////////////////////////////////////////////////////////////
void _tty_release_lock( unsigned int channel )
{
    unsigned int* tty_address = (unsigned int *) &seg_tty_base;

    if( channel >= NB_TTY_CHANNELS )
    {
        _puts("[GIET ERROR] in _tty_release_lock() : illegal TTY index\n");
        _exit();        
    }

    tty_address[channel * TTY_SPAN + TTY_CONFIG] = 0;
}

//////////////////////////////////////////////////////////////////////////////
// This function returns the content of the TTY_READ register in the 
// TTY terminal identified by the channel argument.
//////////////////////////////////////////////////////////////////////////////
unsigned int _tty_read_data( unsigned int channel )
{
    unsigned int* tty_address = (unsigned int *) &seg_tty_base;

    if( channel >= NB_TTY_CHANNELS )
    {
        _puts("[GIET ERROR] in _tty_read_data() : illegal TTY index\n");
        _exit();        
    }

    return tty_address[channel * TTY_SPAN + TTY_READ];
}

//////////////////////////////////////////////////////////////////////////////
// This function returns the content of the TTY_STATUS register in the 
// TTY terminal identified by the channel argument.
//////////////////////////////////////////////////////////////////////////////
unsigned int _tty_get_status( unsigned int channel )
{
    unsigned int* tty_address = (unsigned int *) &seg_tty_base;

    if( channel >= NB_TTY_CHANNELS )
    {
        _puts("[GIET ERROR] in _tty_get_status() : illegal TTY index\n");
        _exit();        
    }

    return tty_address[channel * TTY_SPAN + TTY_STATUS];
}

//////////////////////////////////////////////////////////////////////////////
// This function writes one character in the TTY_WRITE register in the 
// TTY terminal identified by the channel argument.
//////////////////////////////////////////////////////////////////////////////
void _tty_write_data( unsigned int channel,
                      char         byte )
{
    unsigned int* tty_address = (unsigned int *) &seg_tty_base;

    if( channel >= NB_TTY_CHANNELS )
    {
        _puts("[GIET ERROR] in _tty_write_data() : illegal TTY index\n");
        _exit();        
    }

    tty_address[channel * TTY_SPAN + TTY_WRITE] = (unsigned int) byte;
}


// Local Variables:
// tab-width: 4
// c-basic-offset: 4
// c-file-offsets:((innamespace . 0)(inline-open . 0))
// indent-tabs-mode: nil
// End:
// vim: filetype=c:expandtab:shiftwidth=4:tabstop=4:softtabstop=4