Context Navigation

source: soft/giet_vm/giet_kernel/sys_handler.c @ 810

Last change on this file since 810 was 790, checked in by alain, 9 years ago
Cosmetic
Property svn:executable set to ``*
File size: 140.0 KB

Line
1	///////////////////////////////////////////////////////////////////////////////////
2	// File : sys_handler.c
3	// Date : 01/04/2012
4	// Author : alain greiner and joel porquet
5	// Copyright (c) UPMC-LIP6
6	///////////////////////////////////////////////////////////////////////////////////
7
8	#include <sys_handler.h>
9	#include <tty_driver.h>
10	#include <tim_driver.h>
11	#include <nic_driver.h>
12	#include <mmc_driver.h>
13	#include <mwr_driver.h>
14	#include <cma_driver.h>
15	#include <ctx_handler.h>
16	#include <fat32.h>
17	#include <elf-types.h>
18	#include <utils.h>
19	#include <kernel_malloc.h>
20	#include <tty0.h>
21	#include <vmem.h>
22	#include <hard_config.h>
23	#include <giet_config.h>
24	#include <mapping_info.h>
25	#include <irq_handler.h>
26	#include <io.h>
27
28	#if !defined(X_SIZE)
29	# error: You must define X_SIZE in the hard_config.h file
30	#endif
31
32	#if !defined(Y_SIZE)
33	# error: You must define Y_SIZE in the hard_config.h file
34	#endif
35
36	#if !defined(NB_PROCS_MAX)
37	# error: You must define NB_PROCS_MAX in the hard_config.h file
38	#endif
39
40	#if !defined(SEG_BOOT_MAPPING_BASE)
41	# error: You must define SEG_BOOT_MAPPING_BASE in the hard_config.h file
42	#endif
43
44	#if !defined(NB_TTY_CHANNELS)
45	# error: You must define NB_TTY_CHANNELS in the hard_config.h file
46	#endif
47
48	#if (NB_TTY_CHANNELS < 1)
49	# error: NB_TTY_CHANNELS cannot be smaller than 1!
50	#endif
51
52	#if !defined(NB_TIM_CHANNELS)
53	# error: You must define NB_TIM_CHANNELS in the hard_config.h file
54	#endif
55
56	#if !defined(NB_NIC_CHANNELS)
57	# error: You must define NB_NIC_CHANNELS in the hard_config.h file
58	#endif
59
60	#if !defined(NB_CMA_CHANNELS)
61	# error: You must define NB_CMA_CHANNELS in the hard_config.h file
62	#endif
63
64	#if !defined(GIET_NO_HARD_CC)
65	# error: You must define GIET_NO_HARD_CC in the giet_config.h file
66	#endif
67
68	#if !defined ( GIET_NIC_MAC4 )
69	# error: You must define GIET_NIC_MAC4 in the giet_config.h file
70	#endif
71
72	#if !defined ( GIET_NIC_MAC2 )
73	# error: You must define GIET_NIC_MAC2 in the giet_config.h file
74	#endif
75
76	////////////////////////////////////////////////////////////////////////////
77	// Extern variables
78	////////////////////////////////////////////////////////////////////////////
79
80	// allocated in tty0.c file.
81	extern sqt_lock_t _tty0_sqt_lock;
82
83	// allocated in mwr_driver.c file.
84	extern simple_lock_t _coproc_lock[X_SIZE*Y_SIZE];
85	extern unsigned int _coproc_type[X_SIZE*Y_SIZE];
86	extern unsigned int _coproc_info[X_SIZE*Y_SIZE];
87	extern unsigned int _coproc_mode[X_SIZE*Y_SIZE];
88	extern unsigned int _coproc_error[X_SIZE*Y_SIZE];
89	extern unsigned int _coproc_trdid[X_SIZE*Y_SIZE];
90
91	// allocated in tty_driver.c file.
92	extern tty_fifo_t _tty_rx_fifo[NB_TTY_CHANNELS];
93
94	// allocated in kernel_init.c file
95	extern static_scheduler_t* _schedulers[X_SIZE][Y_SIZE][NB_PROCS_MAX];
96
97	// allocated in kernel_init.c file
98	extern unsigned long long _ptabs_paddr[GIET_NB_VSPACE_MAX][X_SIZE][Y_SIZE];
99
100	////////////////////////////////////////////////////////////////////////////////
101	// Allocator protecting exclusive access to FBF by a single application.
102	// - The number of users in a given application should be set by a single
103	// thread using an _atomic_test_and_set().
104	// - The allocator is atomically decremented by each user thread when
105	// the thread exit.
106	////////////////////////////////////////////////////////////////////////////////
107
108	__attribute__((section(".kdata")))
109	unsigned int _fbf_alloc = 0;
110
111	////////////////////////////////////////////////////////////////////////////////
112	// Channel allocators for multi-channels peripherals
113	// - The array _***_channel_allocator[channel] defines the number of user
114	// threads for a dynamically allocated channel of peripheral ***.
115	// - The array _***_channel_wti[channel] defines the WTI index and the
116	// processor coordinates for the processor receiving the channel WTI.
117	////////////////////////////////////////////////////////////////////////////////
118
119	#if NB_TTY_CHANNELS
120	__attribute__((section(".kdata")))
121	unsigned int _tty_channel_alloc[NB_TTY_CHANNELS] = {0};
122
123	__attribute__((section(".kdata")))
124	unsigned int _tty_channel_wti[NB_TTY_CHANNELS];
125	#endif
126
127	#if NB_TIM_CHANNELS
128	__attribute__((section(".kdata")))
129	unsigned int _tim_channel_alloc[NB_TIM_CHANNELS] = {0};
130
131	__attribute__((section(".kdata")))
132	unsigned int _tim_channel_wti[NB_TIM_CHANNELS];
133	#endif
134
135	#if NB_CMA_CHANNELS
136	__attribute__((section(".kdata")))
137	unsigned int _cma_channel_alloc[NB_CMA_CHANNELS] = {0};
138
139	__attribute__((section(".kdata")))
140	unsigned int _cma_channel_wti[NB_CMA_CHANNELS];
141	#endif
142
143	#if NB_NIC_CHANNELS
144	__attribute__((section(".kdata")))
145	unsigned int _nic_rx_channel_alloc[NB_NIC_CHANNELS] = {0};
146
147	__attribute__((section(".kdata")))
148	unsigned int _nic_rx_channel_wti[NB_NIC_CHANNELS];
149
150	__attribute__((section(".kdata")))
151	unsigned int _nic_tx_channel_alloc[NB_NIC_CHANNELS] = {0};
152
153	__attribute__((section(".kdata")))
154	unsigned int _nic_tx_channel_wti[NB_NIC_CHANNELS];
155	#endif
156
157	////////////////////////////////////////////////////////////////////////////
158	// NIC_RX and NIC_TX kernel chbuf arrays
159	////////////////////////////////////////////////////////////////////////////
160
161	__attribute__((section(".kdata")))
162	nic_chbuf_t _nic_ker_rx_chbuf[NB_NIC_CHANNELS] __attribute__((aligned(64)));
163
164	__attribute__((section(".kdata")))
165	nic_chbuf_t _nic_ker_tx_chbuf[NB_NIC_CHANNELS] __attribute__((aligned(64)));
166
167	////////////////////////////////////////////////////////////////////////////
168	// FBF related chbuf
169	// The physical address of this chbuf is required for L2 cache sync.
170	////////////////////////////////////////////////////////////////////////////
171
172	__attribute__((section(".kdata")))
173	fbf_chbuf_t _fbf_ker_chbuf __attribute__((aligned(64)));
174
175	__attribute__((section(".kdata")))
176	unsigned long long _fbf_chbuf_paddr;
177
178	////////////////////////////////////////////////////////////////////////////
179	// Initialize the syscall vector with syscall handlers
180	// Note: This array must be synchronised with the define in file stdio.h
181	////////////////////////////////////////////////////////////////////////////
182
183	__attribute__((section(".kdata")))
184	const void * _syscall_vector[64] =
185	{
186	&_sys_proc_xyp, /* 0x00 */
187	&_get_proctime, /* 0x01 */
188	&_sys_procs_number, /* 0x02 */
189	&_sys_xy_from_ptr, /* 0x03 */
190	&_sys_ukn, /* 0x04 */
191	&_sys_vseg_get_vbase, /* 0x05 */
192	&_sys_vseg_get_length, /* 0x06 */
193	&_sys_heap_info, /* 0x07 */
194	&_sys_fbf_size, /* 0x08 */
195	&_sys_fbf_alloc, /* 0x09 */
196
197	#if NB_CMA_CHANNELS
198	&_sys_fbf_cma_alloc, /* 0x0A */
199	&_sys_fbf_cma_init_buf, /* 0x0B */
200	&_sys_fbf_cma_start, /* 0x0C */
201	&_sys_fbf_cma_display, /* 0x0D */
202	&_sys_fbf_cma_stop, /* 0x0E */
203	&_sys_fbf_cma_check, /* 0x0F */
204	#else
205	&_sys_ukn, /* 0x0A */
206	&_sys_ukn, /* 0x0B */
207	&_sys_ukn, /* 0x0C */
208	&_sys_ukn, /* 0x0D */
209	&_sys_ukn, /* 0x0E */
210	&_sys_ukn, /* 0x0F */
211	#endif
212
213	&_sys_applications_status, /* 0x10 */
214	&_sys_fbf_sync_write, /* 0x11 */
215	&_sys_fbf_sync_read, /* 0x12 */
216	&_sys_ukn, /* 0x13 */
217	&_sys_tim_alloc, /* 0x14 */
218	&_sys_tim_start, /* 0x15 */
219	&_sys_tim_stop, /* 0x16 */
220	&_sys_kill_application, /* 0x17 */
221	&_sys_exec_application, /* 0x18 */
222	&_sys_ukn, /* 0x19 */
223	&_sys_pthread_control, /* 0x1A */
224	&_sys_pthread_yield, /* 0x1B */
225	&_sys_pthread_kill, /* 0x1C */
226	&_sys_pthread_create, /* 0x1D */
227	&_sys_pthread_join, /* 0x1E */
228	&_sys_pthread_exit, /* 0x1F */
229
230	&_fat_open, /* 0x20 */
231	&_sys_fat_read, /* 0x21 */
232	&_sys_fat_write, /* 0x22 */
233	&_fat_lseek, /* 0x23 */
234	&_fat_file_info, /* 0x24 */
235	&_fat_close, /* 0x25 */
236	&_fat_remove, /* 0x26 */
237	&_fat_rename, /* 0x27 */
238	&_fat_mkdir, /* 0x28 */
239	&_fat_opendir, /* 0x29 */
240	&_fat_closedir, /* 0x2A */
241	&_fat_readdir, /* 0x2B */
242	&_sys_fat_pread, /* 0x2C */
243	&_sys_fat_mmap, /* 0x2D */
244	&_sys_fat_munmap, /* 0x2E */
245	&_sys_fat_dump, /* 0x2F */
246
247	#if NB_NIC_CHANNELS
248	&_sys_nic_alloc, /* 0x30 */
249	&_sys_nic_start, /* 0x31 */
250	&_sys_nic_move, /* 0x32 */
251	&_sys_nic_stop, /* 0x33 */
252	&_sys_nic_stats, /* 0x34 */
253	&_sys_nic_clear, /* 0x35 */
254	#else
255	&_sys_ukn, /* 0x30 */
256	&_sys_ukn, /* 0x31 */
257	&_sys_ukn, /* 0x32 */
258	&_sys_ukn, /* 0x33 */
259	&_sys_ukn, /* 0x34 */
260	&_sys_ukn, /* 0x35 */
261	#endif
262
263	&_sys_tty_write, /* 0x36 */
264	&_sys_tty_read, /* 0x37 */
265	&_sys_tty_alloc, /* 0x38 */
266	&_sys_ukn, /* 0x39 */
267	&_sys_ukn, /* 0x3A */
268	&_sys_coproc_completed, /* 0x3B */
269	&_sys_coproc_alloc, /* 0x3C */
270	&_sys_coproc_channel_init, /* 0x3D */
271	&_sys_coproc_run, /* 0x3E */
272	&_sys_coproc_release, /* 0x3F */
273	};
274
275
276
277	///////////////////////////////////////////////////////////////////////////////////
278	// File system related syscall handlers
279	///////////////////////////////////////////////////////////////////////////////////
280
281	///////////////////////////////////////////////////////////////////////////////////
282	// This function is called by the _sys_fat_mmap() function.
283	// It implements a simplistic pages allocator from the MMAP vseg of the vspace
284	// identified by the <vspace_id> argument. The number of pages is defined by
285	// the <count> argument.
286	// Allocated pages are never released, and the allocator is the "psegid" field
287	// in the vseg mapping, that is initialised to 0 by the boot code.
288	// In order to support concurrent system calls, the allocator must be
289	// atomically incremented.
290	///////////////////////////////////////////////////////////////////////////////////
291	// Returns the buffer vbase address in case of success.
292	// Returns 0 in case of error (no MMAP vseg or not enough space).
293	///////////////////////////////////////////////////////////////////////////////////
294	static unsigned int _mmap_pages_alloc( unsigned int vspace_id,
295	unsigned int count )
296	{
297	mapping_header_t* header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
298	mapping_vspace_t* vspace = _get_vspace_base( header );
299	mapping_vseg_t* vseg = _get_vseg_base( header );
300
301	// loop on the vsegs to find the MMAP vseg vbase, length, and offset
302	unsigned int vseg_id;
303	unsigned int vbase;
304	unsigned int offset;
305	unsigned int length;
306	unsigned int found = 0;
307	for (vseg_id = vspace[vspace_id].vseg_offset;
308	vseg_id < (vspace[vspace_id].vseg_offset + vspace[vspace_id].vsegs);
309	vseg_id++)
310	{
311	if ( vseg[vseg_id].type == VSEG_TYPE_MMAP )
312	{
313	offset = _atomic_increment( &vseg[vseg_id].psegid , count );
314	vbase = vseg[vseg_id].vbase;
315	length = vseg[vseg_id].length;
316	found = 1;
317	break;
318	}
319	}
320
321	if ( (found == 0) \|\| (((offset + count)<<12) > length) )
322	{
323	return 0;
324	}
325	else
326	{
327	return vbase + (offset<<12);
328	}
329	} // end _mmap_pages_alloc()
330
331
332	///////////////////////////////////////////////////////////////////////////////////
333	// This function implements the giet_fat_read() system call.
334	///////////////////////////////////////////////////////////////////////////////////
335	int _sys_fat_read( unsigned int fd_id,
336	unsigned int vaddr,
337	unsigned int count )
338	{
339	return _fat_read( fd_id,
340	vaddr,
341	count,
342	0, // no paddr extension
343	0, // no forced offset
344	0 ); // no special mode
345	}
346
347	////////////////////////////////////////////////////////////////
348	// This function implements the giet_fat_pread() system call.
349	////////////////////////////////////////////////////////////////
350	int _sys_fat_pread( unsigned int fd_id,
351	unsigned int vaddr,
352	unsigned int count,
353	unsigned int offset )
354	{
355	return _fat_read( fd_id,
356	vaddr,
357	count,
358	0, // no paddr extension
359	offset,
360	FAT_FORCED_OFFSET );
361	}
362
363	////////////////////////////////////////////////////////////////
364	// This function implements the giet_fat_write() system call.
365	////////////////////////////////////////////////////////////////
366	int _sys_fat_write( unsigned int fd_id,
367	unsigned int vaddr,
368	unsigned int count )
369	{
370	return _fat_write( fd_id,
371	vaddr,
372	count,
373	0, // no paddr extension
374	0 ); // no special mode
375	}
376
377	///////////////////////////////////////////////////////////////////////////////////
378	// This function implements the "giet_fat_mmap()" system call.
379	// It allocates <count> contiguous pages from the MMAP vseg of the calling vspace.
380	// It maps all these pages directly to the file_cache defined by <fd_id>.
381	// The <offset> in the file is a number of pages.
382	// The <prot> argument defines the access modes MAP_PROT_WRITE and MAP_PROT_EXEC.
383	// In writable mode, the file size is extended to the (offset + count) pages.
384	// In non writable mode, the file size must be >= (offset + count) pages.
385	// It has the following limitations:
386	// - it does not support MAP_PRIVATE (no copy on write).
387	// - it does not support MAP_FIXED (no forced user buffer address).
388	// - it does not support MAP_ANONYMOUS (only file mapping).
389	// - the <offset> and <count> arguments must multiple of 4 Kbytes.
390	///////////////////////////////////////////////////////////////////////////////////
391	// Returns memory buffer vbase in case of success.
392	// Returns 0 on error.
393	///////////////////////////////////////////////////////////////////////////////////
394	int _sys_fat_mmap( unsigned int fd_id,
395	unsigned int count,
396	unsigned int offset,
397	unsigned int prot )
398	{
399	// takes the FAT lock and register it in thread context
400	static_scheduler_t* psched = _get_sched();
401	unsigned int ltid = _get_thread_ltid();
402	_spin_lock_acquire( &_fat.fat_lock );
403	_atomic_or( &psched->context[ltid].slot[CTX_LOCKS_ID] , LOCKS_MASK_FAT );
404
405	// check fd_id overflow
406	if ( fd_id >= GIET_OPEN_FILES_MAX )
407	{
408	_spin_lock_release( &_fat.fat_lock );
409	_atomic_and( &psched->context[ltid].slot[CTX_LOCKS_ID] , ~LOCKS_MASK_FAT );
410
411	_printf("\n[GIET ERROR] _sys_fat_mmap(): illegal file descriptor\n");
412	return 0;
413	}
414
415	// check file open
416	if ( _fat.fd[fd_id].allocated == 0 )
417	{
418	_spin_lock_release( &_fat.fat_lock );
419	_atomic_and( &psched->context[ltid].slot[CTX_LOCKS_ID] , ~LOCKS_MASK_FAT );
420
421	_printf("\n[GIET ERROR] _sys_fat_mmap(): file not open\n" );
422	return 0;
423	}
424
425	// get access modes
426	unsigned int writable = prot & MAP_PROT_WRITE;
427	unsigned int executable = prot & MAP_PROT_EXEC;
428
429	// get inode pointer
430	fat_inode_t* inode = _fat.fd[fd_id].inode;
431
432	// check file writable
433	if ( _fat.fd[fd_id].read_only && writable )
434	{
435	_spin_lock_release( &_fat.fat_lock );
436	_atomic_and( &psched->context[ltid].slot[CTX_LOCKS_ID] , ~LOCKS_MASK_FAT );
437
438	_printf("\n[GIET ERROR] _sys_fat_mmap(): file <%s> is read-only\n",
439	inode->name );
440	return 0;
441	}
442
443	// get vspace index and calling proc coordinates
444	unsigned int vsid = _get_context_slot( CTX_VSID_ID );
445
446	// compute first and last cluster indexes
447	unsigned int first_cluster = offset;
448	unsigned int last_cluster = offset + count - 1;
449
450	#if GIET_DEBUG_MMAP
451	unsigned int procid = _get_procid();
452	unsigned int x_id = procid >> (Y_WIDTH + P_WIDTH);
453	unsigned int y_id = (procid >> P_WIDTH) & ((1<<Y_WIDTH)-1);
454	unsigned int p_id = procid & ((1<<P_WIDTH)-1);
455	if ( _get_proctime() > GIET_DEBUG_MMAP )
456	_printf("\n[DEBUG MMAP] _sys_fat_mmap() : P[%d,%d,%d] enters at cycle %d\n"
457	" for file %s / size = %x / cluster = %x / cache = %x / desc[0] = %x\n"
458	" first_cluster = %d / last_cluster = %d\n",
459	x_id , y_id , p_id , _get_proctime() ,
460	inode->name , inode->size , inode->cluster ,
461	(unsigned int)inode->cache , (unsigned int)inode->cache->children[0] ,
462	first_cluster , last_cluster );
463	#endif
464
465	// get buffer vbase from MMAP vseg in calling vspace
466	unsigned int buffer_vbase = _mmap_pages_alloc( vsid, count );
467	if ( buffer_vbase == 0 )
468	{
469	_spin_lock_release( &_fat.fat_lock );
470	_atomic_and( &psched->context[ltid].slot[CTX_LOCKS_ID] , ~LOCKS_MASK_FAT );
471
472	_printf("\n[GIET ERROR] _sys_fat_mmap(): no space in MMAP vseg to map file %s\n",
473	_fat.fd[fd_id].inode->name );
474	return 0;
475	}
476
477	// set flags for all pages in buffer
478	unsigned int flags = 0;
479	flags \|= PTE_C; // cachable
480	flags \|= PTE_U; // user access
481	flags \|= PTE_L; // local access (unused)
482	flags \|= PTE_R; // remote access (unused)
483	if ( executable ) flags \|= PTE_X;
484	if ( writable ) flags \|= PTE_W;
485
486	// loop on pages to be mapped
487	unsigned int cid;
488	unsigned int user_vaddr = buffer_vbase;
489	for ( cid = first_cluster ; cid <= last_cluster ; cid++ )
490	{
491	// get file_cache buffer vaddr
492	unsigned char* cache_vaddr;
493	fat_cache_desc_t* pdesc;
494	if ( _get_file_cache_buffer( inode,
495	cid,
496	writable,
497	&pdesc ) )
498	{
499	_spin_lock_release( &_fat.fat_lock );
500	_atomic_and( &psched->context[ltid].slot[CTX_LOCKS_ID] , ~LOCKS_MASK_FAT );
501
502	_printf("\n[FAT ERROR] _sys_fat_mmap(): cannot access file <%s>\n",
503	_fat.fd[fd_id].inode->name );
504	return 0;
505	}
506
507	cache_vaddr = pdesc->buffer;
508
509	// compute buffer paddr
510	unsigned long long cache_paddr;
511	unsigned int unused;
512	cache_paddr = _v2p_translate( (unsigned int)cache_vaddr, &unused );
513
514	// map the user_vaddr to cache_paddr
515	// in all pages tables defined for the vspace
516	unsigned int x_cur;
517	unsigned int y_cur;
518	for ( x_cur = 0 ; x_cur < X_SIZE ; x_cur++ )
519	{
520	for ( y_cur = 0 ; y_cur < Y_SIZE ; y_cur++ )
521	{
522	if ( _ptabs_paddr[vsid][x_cur][y_cur] ) // Page table is defined
523	{
524	_v2p_add_pte2( vsid,
525	x_cur,
526	y_cur,
527	user_vaddr >> 12,
528	flags,
529	cache_paddr >> 12,
530	0 );
531	}
532	}
533	}
534
535	#if GIET_DEBUG_MMAP
536	if ( _get_proctime() > GIET_DEBUG_MMAP )
537	_printf("\n[DEBUG MMAP] _sys_fat_mmap() : P[%d,%d,%d] map cluster_id = %d\n"
538	" user_vaddr = %x / cache_paddr = %l\n",
539	x_id , y_id , p_id , cid , user_vaddr , cache_paddr );
540	#endif
541
542	// increment user buffer vaddr
543	user_vaddr += 4096;
544	}
545
546	// releases the FAT lock
547	_spin_lock_release( &_fat.fat_lock );
548	_atomic_and( &psched->context[ltid].slot[CTX_LOCKS_ID] , ~LOCKS_MASK_FAT );
549
550	#if GIET_DEBUG_MMAP
551	if ( _get_proctime() > GIET_DEBUG_MMAP )
552	_printf("\n[DEBUG MMAP] _sys_fat_mmap() : P[%d,%d,%d] returns buffer %x for file %s\n",
553	x_id , y_id , p_id , buffer_vbase , inode->name );
554	#endif
555
556	// returns pointer on mapped buffer in user space
557	return buffer_vbase;
558
559	} // end _sys_fat_mmap()
560
561
562	//////////////////////////////////////////////////////////////////
563	// This function implements the giet_fat_munmap() system call.
564	//////////////////////////////////////////////////////////////////
565	int _sys_fat_munmap( unsigned int vaddr,
566	unsigned int count )
567	{
568	// get vspace index
569	unsigned int vsid = _get_context_slot( CTX_VSID_ID );
570
571	// loop on pages
572	unsigned int page;
573	for ( page = 0 ; page < count ; page++ )
574	{
575	unsigned int vpn = (vaddr>>12) + page;
576
577	// loop on all page tables defined for the vspace
578	unsigned int x_cur;
579	unsigned int y_cur;
580	for ( x_cur = 0 ; x_cur < X_SIZE ; x_cur++ )
581	{
582	for ( y_cur = 0 ; y_cur < Y_SIZE ; y_cur++ )
583	{
584	if ( _ptabs_paddr[vsid][x_cur][y_cur] ) // Page table is defined
585	{
586	_v2p_del_pte2( vsid , x_cur , y_cur , vpn );
587	}
588	}
589	}
590	}
591	return 0;
592	} // end _sys_fat_munmap()
593
594
595
596
597	///////////////////////////////////////////////////////////////////////////////////
598	// This service function is called by the _sys_fat_dump() kernel function.
599	// It displays on the calling thread terminal the content of a 512 bytes buffer
600	// defined by the <buf> pointer.
601	// The <string> , <cluster_id> and <block_id> arguments are only used
602	// to build a meaningful title: <string> is an identifier, <cluster_id> is
603	// the cluster index (in file or FAT), <block_id> is the block index (in cluster).
604	///////////////////////////////////////////////////////////////////////////////////
605	static void _dump_block( unsigned char* buf,
606	char* string,
607	unsigned int cluster_id,
608	unsigned int block_id )
609	{
610	unsigned int line;
611	unsigned int word;
612
613	_user_printf("\n--- %s : cluster_id = %d / block_id = %d ---\n",
614	string , cluster_id , block_id );
615
616	for ( line = 0 ; line < 16 ; line++ )
617	{
618	// display line index
619	_user_printf("%x : ", line );
620
621	// display 8*4 bytes hexa per line
622	for ( word=0 ; word<8 ; word++ )
623	{
624	unsigned int byte = (line<<5) + (word<<2);
625	unsigned int hexa = (buf[byte ]<<24) \|
626	(buf[byte+1]<<16) \|
627	(buf[byte+2]<< 8) \|
628	(buf[byte+3] );
629	_user_printf(" %X \|", hexa );
630	}
631	_user_printf("\n");
632	}
633	} // end _dump_block()
634
635
636	///////////////////////////////////////////////////////////////////////////////////
637	// This function implements the giet_fat_dump() system call.
638	// It analyse the <type>, <pathname> and <sector_id> arguments to select
639	// a 512 bytes sector, and display the sector content on the calling thread TTY.
640	// The <type> argument can take the following values :
641	// - DUMP_BS : boot sector
642	// - DUMP_FS : fs_info sector
643	// - DUMP_FAT : fat sector, identified by <sector_id>
644	// - DUMP_FILE : file sector, identified by <pathname> and <sector_id>
645	// - DUMP_DIR : directory sector, identified by <pathname> and <sector_id>
646	// The <sector_id> argument defines the sector index in the file or in the FAT.
647	// For a file or a directory, or for the FAT itself, it uses the kernel File-Caches
648	// or Fat-Cache, and the Inode-Tree.
649	// For the boot sector, or fs_info sector, it access directly the block device,
650	// that is loaded in the FAT descriptor block-buffer.
651	///////////////////////////////////////////////////////////////////////////////////
652	// Returns 0 in case of success.
653	// Returns 1 in case of error.
654	///////////////////////////////////////////////////////////////////////////////////
655	int _sys_fat_dump( unsigned int type,
656	char* pathname,
657	unsigned int sector_id )
658	{
659	unsigned char* buf; // pointer on 512 bytes buffer
660	unsigned int cluster_id = sector_id >> 3; // cluster index in cache
661	unsigned int block_id = sector_id & 0x7; // cluster index in cache
662	unsigned int fd_id; // file/dir descriptor index
663
664	if( type == DUMP_BS ) // dump the boot sector
665	{
666	// access block_device
667	buf = _fat.block_buffer;
668	if ( _fat_ioc_access( 1, // descheduling mode
669	1, // read
670	0, // boot sector lba
671	(unsigned int)buf,
672	1 ) ) // one block
673	{
674	_printf("\n[FAT ERROR] _sys_fat_dump(): cannot access device for BS\n");
675	return 1;
676	}
677	_fat.block_buffer_lba = 0;
678
679	// dump boot sector
680	_dump_block( buf, "boot sector" , 0 , 0 );
681	}
682	else if ( type == DUMP_FS ) // dump the fs_info sector
683	{
684	// access block_device
685	buf = _fat.block_buffer;
686	if ( _fat_ioc_access( 1, // descheduling mode
687	1, // read
688	_fat.fs_info_lba, // fs_info sector lba
689	(unsigned int)buf,
690	1 ) ) // one block
691	{
692	_printf("\n[FAT ERROR] _sys_fat_dump(): cannot access device for FS\n");
693	return 1;
694	}
695	_fat.block_buffer_lba = _fat.fs_info_lba;
696
697	// dump fs-info sector
698	_dump_block( buf, "fs_info sector" , 0 , 0 );
699	}
700	else if ( type == DUMP_FAT ) // dump a fat sector
701	{
702	// get pointer on the relevant buffer descriptor in Fat-Cache
703	fat_cache_desc_t* pdesc;
704	if ( _get_fat_cache_buffer( cluster_id, &pdesc ) )
705	{
706	_printf("\n[FAT ERROR] _sys_fat_dump(): cannot access Fat-Cache\n");
707	return 1;
708	}
709	buf = pdesc->buffer + (block_id<<9);
710
711	// dump fat sector
712	_dump_block( buf, "fat" , cluster_id , block_id );
713	}
714	else if ( type == DUMP_FILE ) // dump a file sector
715	{
716	// open file
717	fd_id = _fat_open( pathname , O_RDONLY );
718	if ( fd_id < 0 )
719	{
720	_printf("\n[FAT ERROR] _sys_fat_dump(): cannot open file <%s>\n", pathname );
721	return 1;
722	}
723	fat_inode_t* inode = _fat.fd[fd_id].inode;
724
725	// get pointer on the relevant buffer descriptor in File-Cache
726	fat_cache_desc_t* pdesc;
727	if ( _get_file_cache_buffer( inode, cluster_id, 0, &pdesc ) )
728	{
729	_printf("\n[FAT ERROR] _sys_fat_dump(): cannot access file <%s>\n", pathname );
730	return 1;
731	}
732	buf = pdesc->buffer + (block_id<<9);
733
734	// dump file sector
735	_dump_block( buf, pathname , cluster_id , block_id );
736
737	// close file
738	_fat_close( fd_id );
739	}
740	else if ( type == DUMP_DIR ) // dump a directory sector
741	{
742	// open directory
743	fd_id = _fat_opendir( pathname );
744	if ( fd_id < 0 )
745	{
746	_printf("\n[FAT ERROR] _sys_fat_dump(): cannot open <%s>\n", pathname );
747	return 1;
748	}
749	fat_inode_t* inode = _fat.fd[fd_id].inode;
750
751	// get pointer on the relevant buffer descriptor in File-Cache
752	fat_cache_desc_t* pdesc;
753	if ( _get_file_cache_buffer( inode, cluster_id, 0, &pdesc ) )
754	{
755	_printf("\n[FAT ERROR] _sys_fat_dump(): cannot access <%s>\n", pathname );
756	return 1;
757	}
758	buf = pdesc->buffer + (block_id<<9);
759
760	// dump directory sector
761	_dump_block( buf, pathname , cluster_id , block_id );
762
763	// close directory
764	_fat_closedir( fd_id );
765	}
766
767	return 0;
768	} // end sys_fat_dump
769
770
771
772	//////////////////////////////////////////////////////////////////////////////
773	// Applications related syscall handlers
774	//////////////////////////////////////////////////////////////////////////////
775
776	////////////////////////////////////////////////////////////////////////
777	// This function is called by the _sys_exec_application() function
778	// to reload all data segments contained in an application.elf file.
779	// File checking is minimal, because these segments have already
780	// been loaded by the boot code.
781	////////////////////////////////////////////////////////////////////////
782	static unsigned int _load_writable_segments( mapping_vspace_t* vspace )
783	{
784
785	#if GIET_DEBUG_EXEC
786	unsigned int gpid = _get_procid();
787	unsigned int cluster_xy = gpid >> P_WIDTH;
788	unsigned int p = gpid & ((1<<P_WIDTH)-1);
789	unsigned int x = cluster_xy >> Y_WIDTH;
790	unsigned int y = cluster_xy & ((1<<Y_WIDTH)-1);
791	if ( _get_proctime() > GIET_DEBUG_EXEC )
792	_printf("\n[DEBUG EXEC] _load_writable_segments() at cycle %d\n"
793	"P[%d,%d,%d] enters for %s\n",
794	_get_proctime() , x , y , p , vspace->name );
795	#endif
796
797	mapping_header_t* header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
798	mapping_vseg_t* vseg = _get_vseg_base(header);
799
800	unsigned int vseg_id; // vseg index in mapping
801	char buf[4096]; // buffer to store one cluster
802	unsigned int fd = 0; // file descriptor
803	unsigned int found = 0;
804
805	// first scan on vsegs in vspace to find the .elf pathname
806	for (vseg_id = vspace->vseg_offset;
807	vseg_id < (vspace->vseg_offset + vspace->vsegs);
808	vseg_id++)
809	{
810	if( vseg[vseg_id].type == VSEG_TYPE_ELF )
811	{
812	// open the .elf file associated to vspace
813	fd = _fat_open( vseg[vseg_id].binpath , O_RDONLY );
814	if ( fd < 0 ) return 1;
815
816	#if GIET_DEBUG_EXEC
817	if ( _get_proctime() > GIET_DEBUG_EXEC )
818	_printf("\n[DEBUG EXEC] _load_writable_segments() at cycle %d\n"
819	"P[%d,%d,%d] open %s / fd = %d\n",
820	_get_proctime() , x , y , p , vseg[vseg_id].binpath , fd );
821	#endif
822	found = 1;
823	break;
824
825	}
826	}
827
828	// check .elf file found
829	if ( found == 0 )
830	{
831	_printf("\n[GIET ERROR] _load_writable_segments() : .elf not found\n");
832	return 1;
833	}
834
835	// load Elf-Header into buffer from .elf file
836	if ( _fat_lseek( fd, 0, SEEK_SET ) < 0 )
837	{
838	_printf("\n[GIET ERROR] _load_writable_segments() : cannot seek\n");
839	_fat_close( fd );
840	return 1;
841	}
842	if ( _fat_read( fd, (unsigned int)buf, 4096, 0, 0, 0 ) < 0 )
843	{
844	_printf("\n[GIET ERROR] _load_writable_segments() : cannot read\n");
845	_fat_close( fd );
846	return 1;
847	}
848
849	#if GIET_DEBUG_EXEC
850	if ( _get_proctime() > GIET_DEBUG_EXEC )
851	_printf("\n[DEBUG EXEC] _load_writable_segments() at cycle %d\n"
852	"P[%d,%d,%d] loaded Elf-Header\n",
853	_get_proctime() , x , y , p );
854	#endif
855
856	// get nsegments and Program-Header-Table offset from Elf-Header
857	Elf32_Ehdr* elf_header_ptr = (Elf32_Ehdr*)buf;
858	unsigned int offset = elf_header_ptr->e_phoff;
859	unsigned int nsegments = elf_header_ptr->e_phnum;
860
861	// load Program-Header-Table from .elf file
862	if ( _fat_lseek( fd, offset, SEEK_SET ) < 0 )
863	{
864	_fat_close( fd );
865	return 1;
866	}
867	if ( _fat_read( fd, (unsigned int)buf, 4096, 0, 0, 0 ) < 0 )
868	{
869	_fat_close( fd );
870	return 1;
871	}
872
873	#if GIET_DEBUG_EXEC
874	if ( _get_proctime() > GIET_DEBUG_EXEC )
875	_printf("\n[DEBUG EXEC] _load_writable_segments() at cycle %d\n"
876	"P[%d,%d,%d] loaded Program-Header-Table\n",
877	_get_proctime() , x , y , p );
878	#endif
879
880	// set Program-Header-Table pointer
881	Elf32_Phdr* elf_pht_ptr = (Elf32_Phdr*)buf;
882
883	// second scan on vsegs in vspace to load the seg_data segments :
884	// - type == VSEG_TYPE_ELF
885	// - non eXecutable
886	for (vseg_id = vspace->vseg_offset;
887	vseg_id < (vspace->vseg_offset + vspace->vsegs);
888	vseg_id++)
889	{
890	if( (vseg[vseg_id].type == VSEG_TYPE_ELF) && // type ELF
891	((vseg[vseg_id].mode & 0x4) == 0) ) // non executable
892	{
893	// get vbase and pbase
894	paddr_t pbase = vseg[vseg_id].pbase;
895	unsigned int vbase = vseg[vseg_id].vbase;
896
897	// scan segments in Progam-Header-Table to find match
898	// No match checking as the segment was previously found
899	unsigned int seg;
900	for (seg = 0 ; seg < nsegments ; seg++)
901	{
902	if ( (elf_pht_ptr[seg].p_type == PT_LOAD) && // loadable
903	(elf_pht_ptr[seg].p_flags & PF_W) && // writable
904	(elf_pht_ptr[seg].p_vaddr == vbase) ) // matching
905	{
906	// Get segment offset and size in .elf file
907	unsigned int seg_offset = elf_pht_ptr[seg].p_offset;
908	unsigned int seg_size = elf_pht_ptr[seg].p_filesz;
909
910	// compute destination address and extension for _fat_read()
911	unsigned int dest = (unsigned int)pbase;
912	unsigned int extend = (unsigned int)(pbase>>32);
913
914	// load the segment
915	if ( _fat_lseek( fd, seg_offset, SEEK_SET ) < 0 )
916	{
917	_fat_close( fd );
918	return 1;
919	}
920	if ( _fat_read( fd, dest, seg_size, extend, 0, FAT_PADDR_MODE ) < 0 )
921	{
922	_fat_close( fd );
923	return 1;
924	}
925	}
926	}
927
928	#if GIET_DEBUG_EXEC
929	if ( _get_proctime() > GIET_DEBUG_EXEC )
930	_printf("\n[DEBUG EXEC] _load_writable_segments() at cycle %d\n"
931	"P[%d,%d,%d] loaded segment %x\n",
932	_get_proctime() , x , y , p , vbase );
933	#endif
934	}
935	} // end loop on writable & loadable segments
936
937	// close .elf file
938	_fat_close( fd );
939
940	return 0;
941	} // end load_writable_segments()
942
943
944
945	///////////////////////////////////////
946	int _sys_exec_application( char* name )
947	{
948	mapping_header_t * header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
949	mapping_vspace_t * vspace = _get_vspace_base(header);
950	mapping_thread_t * thread = _get_thread_base(header);
951	mapping_vseg_t * vseg = _get_vseg_base(header);
952
953	unsigned int vspace_id;
954	unsigned int thread_id;
955
956	#if GIET_DEBUG_EXEC
957	unsigned int gpid = _get_procid();
958	unsigned int cluster_xy = gpid >> P_WIDTH;
959	unsigned int p = gpid & ((1<<P_WIDTH)-1);
960	unsigned int x = cluster_xy >> Y_WIDTH;
961	unsigned int y = cluster_xy & ((1<<Y_WIDTH)-1);
962	if ( _get_proctime() > GIET_DEBUG_EXEC )
963	_printf("\n[DEBUG EXEC] _sys_exec_application() at cycle %d\n"
964	"P[%d,%d,%d] enters for vspace %s\n",
965	_get_proctime() , x, y, p, name );
966	#endif
967
968	unsigned int y_size = header->y_size;
969
970	// scan vspaces to find matching vspace name
971	for (vspace_id = 0 ; vspace_id < header->vspaces ; vspace_id++)
972	{
973	if ( _strcmp( vspace[vspace_id].name, name ) == 0 ) // vspace found
974	{
975
976	#if GIET_DEBUG_EXEC
977	if ( _get_proctime() > GIET_DEBUG_EXEC )
978	_printf("\n[DEBUG EXEC] _sys_exec_application() at cycle %d\n"
979	"P[%d,%d,%d] found vspace %s\n",
980	_get_proctime() , x, y, p, name );
981	#endif
982	// reload writable segments
983	if ( _load_writable_segments( &vspace[vspace_id] ) )
984	{
985	_printf("[GIET ERROR] _sys_exec_application() : "
986	"can't load data segment for vspace %s\n", name );
987	return SYSCALL_CANNOT_LOAD_DATA_SEGMENT;
988	}
989
990	#if GIET_DEBUG_EXEC
991	if ( _get_proctime() > GIET_DEBUG_EXEC )
992	_printf("\n[DEBUG EXEC] _sys_exec_application() at cycle %d\n"
993	"P[%d,%d,%d] loaded all writable segments for vspace %s\n",
994	_get_proctime() , x, y, p, name );
995	#endif
996	// scan threads in vspace with three goals :
997	// - check all threads desactivated
998	// - re-initialise all threads contexts
999	// - find main thread
1000	unsigned int main_found = 0;
1001	unsigned int main_ltid = 0;
1002	static_scheduler_t* main_psched = NULL;
1003	unsigned int min = vspace[vspace_id].thread_offset;
1004	unsigned int max = min + vspace[vspace_id].threads;
1005	for ( thread_id = min ; thread_id < max ; thread_id++ )
1006	{
1007	// get thread identifiers : [x,y,p,ltid]
1008	unsigned int cid = thread[thread_id].clusterid;
1009	unsigned int x = cid / y_size;
1010	unsigned int y = cid % y_size;
1011	unsigned int p = thread[thread_id].proclocid;
1012	unsigned int ltid = thread[thread_id].ltid;
1013	unsigned int vsid = thread[thread_id].stack_vseg_id;
1014
1015	// get scheduler pointer
1016	static_scheduler_t* psched = _schedulers[x][y][p];
1017
1018	// check thread non active
1019	if ( psched->context[ltid].slot[CTX_NORUN_ID] == 0 ) // runnable !!!
1020	{
1021	_printf("\n[GIET ERROR] in _sys_exec_application() : "
1022	"thread %s already active in vspace %s\n",
1023	thread[thread_id].name, name );
1024	return SYSCALL_THREAD_ALREADY_ACTIVE;
1025	}
1026
1027	// initialise thread context
1028	unsigned int ctx_epc = psched->context[ltid].slot[CTX_ENTRY_ID];
1029	unsigned int ctx_sp = vseg[vsid].vbase + vseg[vsid].length;
1030	unsigned int ctx_ra = (unsigned int)&_ctx_eret;
1031	unsigned int ctx_sr = GIET_SR_INIT_VALUE;
1032
1033	psched->context[ltid].slot[CTX_EPC_ID] = ctx_epc;
1034	psched->context[ltid].slot[CTX_RA_ID] = ctx_ra;
1035	psched->context[ltid].slot[CTX_SR_ID] = ctx_sr;
1036	psched->context[ltid].slot[CTX_SP_ID] = ctx_sp;
1037
1038	// register information required to activate main thread
1039	// actual activation done when threads initialisation is completed
1040	if ( thread[thread_id].is_main )
1041	{
1042	main_psched = psched;
1043	main_ltid = ltid;
1044	main_found = 1;
1045	}
1046
1047	#if GIET_DEBUG_EXEC
1048	if ( _get_proctime() > GIET_DEBUG_EXEC )
1049	_printf("\n[DEBUG EXEC] _sys_exec_application() at cycle %d\n"
1050	"P[%d,%d,%d] initialise thread %s in vspace %s\n",
1051	_get_proctime() , x, y, p, thread[thread_id].name , name );
1052	#endif
1053	} // end loop on threads
1054
1055	// activate main thread
1056	if ( main_found )
1057	{
1058	main_psched->context[main_ltid].slot[CTX_NORUN_ID] = 0;
1059	}
1060	else
1061	{
1062	_printf("\n[GIET ERROR] in _sys_exec_application() : "
1063	"main not found in vspace %s\n", name );
1064	return SYSCALL_MAIN_NOT_FOUND;
1065	}
1066
1067	_printf("\n[GIET WARNING] application %s launched : %d threads\n",
1068	name , max-min );
1069
1070	return SYSCALL_OK;
1071	}
1072	} // end of loop on vspaces
1073
1074	// vspace not found
1075	_printf("\n[GIET ERROR] in _sys_exec_application() : "
1076	"vspace %s not found\n", name );
1077	return SYSCALL_VSPACE_NOT_FOUND;
1078
1079	} // end _sys_exec_application()
1080
1081
1082	///////////////////////////////////////
1083	int _sys_kill_application( char* name )
1084	{
1085	mapping_header_t * header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
1086	mapping_vspace_t * vspace = _get_vspace_base(header);
1087	mapping_thread_t * thread = _get_thread_base(header);
1088
1089	unsigned int vspace_id;
1090	unsigned int thread_id;
1091
1092	#if GIET_DEBUG_EXEC
1093	unsigned int gpid = _get_procid();
1094	unsigned int cluster_xy = gpid >> P_WIDTH;
1095	unsigned int p = gpid & ((1<<P_WIDTH)-1);
1096	unsigned int x = cluster_xy >> Y_WIDTH;
1097	unsigned int y = cluster_xy & ((1<<Y_WIDTH)-1);
1098	if ( _get_proctime() > GIET_DEBUG_EXEC )
1099	_printf("\n[DEBUG EXEC] _sys_kill_application() at cycle %d\n"
1100	"P[%d,%d,%d] enters for vspace %s\n",
1101	_get_proctime() , x , y , p , name );
1102	#endif
1103
1104	// shell cannot be killed
1105	if ( _strcmp( name , "shell" ) == 0 )
1106	{
1107	_printf("\n[GIET ERROR] in _sys_kill_application() : "
1108	"%s application cannot be killed\n", name );
1109	return SYSCALL_APPLI_CANNOT_BE_KILLED;
1110	}
1111
1112	// scan vspaces to find matching vspace name
1113	for (vspace_id = 0; vspace_id < header->vspaces; vspace_id++)
1114	{
1115	if ( _strcmp( vspace[vspace_id].name, name ) == 0 )
1116	{
1117	// scan threads to send KILL signal to all threads in vspace
1118	unsigned int y_size = header->y_size;
1119	unsigned int min = vspace[vspace_id].thread_offset;
1120	unsigned int max = min + vspace[vspace_id].threads;
1121	for ( thread_id = min ; thread_id < max ; thread_id++ )
1122	{
1123	unsigned int cid = thread[thread_id].clusterid;
1124	unsigned int x = cid / y_size;
1125	unsigned int y = cid % y_size;
1126	unsigned int p = thread[thread_id].proclocid;
1127	unsigned int ltid = thread[thread_id].ltid;
1128
1129	// get scheduler pointer for processor running the thread
1130	static_scheduler_t* psched = (static_scheduler_t*)_schedulers[x][y][p];
1131
1132	// set KILL signal bit
1133	_atomic_or( &psched->context[ltid].slot[CTX_SIGS_ID] , SIGS_MASK_KILL );
1134	}
1135
1136	_printf("\n[GIET WARNING] application %s killed / %d threads\n",
1137	name , max-min );
1138
1139	return SYSCALL_OK;
1140	}
1141	} // en loop on vspaces
1142
1143	_printf("\n[GIET ERROR] in _sys_kill_application() : "
1144	"application %s not found\n", name );
1145	return SYSCALL_VSPACE_NOT_FOUND;
1146
1147	} // end _sys_kill_application()
1148
1149
1150
1151	//////////////////////////////////////////
1152	int _sys_applications_status( char* name )
1153	{
1154	mapping_header_t * header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
1155	mapping_thread_t * thread = _get_thread_base(header);
1156	mapping_vspace_t * vspace = _get_vspace_base(header);
1157	mapping_cluster_t * cluster = _get_cluster_base(header);
1158
1159	unsigned int thread_id; // thread index in mapping
1160	unsigned int vspace_id; // vspace index in mapping
1161
1162	// scan vspaces
1163	for( vspace_id = 0 ; vspace_id < header->vspaces ; vspace_id++ )
1164	{
1165	if ( (name == NULL) \|\| (_strcmp(vspace[vspace_id].name , name ) == 0) )
1166	{
1167	_user_printf("\n--- vspace %s ---\n", vspace[vspace_id].name );
1168
1169	// scan all threads in vspace
1170	unsigned int min = vspace[vspace_id].thread_offset ;
1171	unsigned int max = min + vspace[vspace_id].threads ;
1172	for ( thread_id = min ; thread_id < max ; thread_id++ )
1173	{
1174	unsigned int clusterid = thread[thread_id].clusterid;
1175	unsigned int p = thread[thread_id].proclocid;
1176	unsigned int x = cluster[clusterid].x;
1177	unsigned int y = cluster[clusterid].y;
1178	unsigned int ltid = thread[thread_id].ltid;
1179	static_scheduler_t* psched = (static_scheduler_t*)_schedulers[x][y][p];
1180	unsigned int norun = psched->context[ltid].slot[CTX_NORUN_ID];
1181	unsigned int tty = psched->context[ltid].slot[CTX_TTY_ID];
1182	unsigned int current = psched->current;
1183
1184	if ( current == ltid )
1185	_user_printf(" - thread %s / P[%d,%d,%d] / ltid = %d / "
1186	"TTY = %d / norun = %x : running\n",
1187	thread[thread_id].name, x, y, p, ltid, tty, norun );
1188	else if ( norun == 0 )
1189	_user_printf(" - thread %s / P[%d,%d,%d] / ltid = %d / "
1190	"TTY = %d / norun = %x : runable\n",
1191	thread[thread_id].name, x, y, p, ltid, tty, norun);
1192	else
1193	_user_printf(" - thread %s / P[%d,%d,%d] / ltid = %d / "
1194	"TTY = %d / norun = %x : blocked\n",
1195	thread[thread_id].name, x, y, p, ltid, tty, norun);
1196	}
1197	}
1198	}
1199	_user_printf("\n");
1200
1201	return SYSCALL_OK;
1202	} // end _sys_applications_status()
1203
1204
1205
1206	/////////////////////////////////////////////////////////////////////////////
1207	// Threads related syscall handlers
1208	/////////////////////////////////////////////////////////////////////////////
1209
1210	////////////////////////////////////////////////
1211	int _sys_pthread_create( unsigned int* buffer,
1212	void* attr,
1213	void* function,
1214	void* arg )
1215	{
1216	// attr argument not supported
1217	if ( attr != NULL )
1218	{
1219	_printf("\n[GIET ERROR] in _sys_pthread_create() : "
1220	"attr argument not supported\n" );
1221
1222	return SYSCALL_PTHREAD_ARGUMENT_NOT_SUPPORTED;
1223	}
1224
1225	// get pointers in mapping
1226	mapping_header_t* header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
1227	mapping_thread_t* thread = _get_thread_base(header);
1228	mapping_vspace_t* vspace = _get_vspace_base(header);
1229	mapping_cluster_t* cluster = _get_cluster_base(header);
1230
1231	// get scheduler for processor running the calling thread
1232	static_scheduler_t* psched = (static_scheduler_t*)_get_sched();
1233
1234	// get calling thread local index in scheduler
1235	unsigned int current = psched->current;
1236
1237	// get vspace index
1238	unsigned int vspace_id = psched->context[current].slot[CTX_VSID_ID];
1239
1240	#if GIET_DEBUG_EXEC
1241	unsigned int gpid = _get_procid();
1242	unsigned int cluster_xy = gpid >> P_WIDTH;
1243	unsigned int p = gpid & ((1<<P_WIDTH)-1);
1244	unsigned int x = cluster_xy >> Y_WIDTH;
1245	unsigned int y = cluster_xy & ((1<<Y_WIDTH)-1);
1246	if ( _get_proctime() > GIET_DEBUG_EXEC )
1247	_printf("\n[DEBUG EXEC] _sys_pthread_create() at cycle %d\n"
1248	"P[%d,%d,%d] enters for vspace %s / entry = %x\n",
1249	_get_proctime() , x , y , p , vspace[vspace_id].name , (unsigned int)function );
1250	#endif
1251
1252	unsigned int thread_id; // searched thread : local index in mapping
1253	unsigned int clusterid; // searched thread : cluster index
1254	unsigned int lpid; // searched thread : processor local index
1255	unsigned int ltid; // searched thread : scheduler thread index
1256	unsigned int cx; // searched thread : X coordinate for searched thread
1257	unsigned int cy; // searched thread : Y coordinate for searched thread
1258	unsigned int entry; // searched thread : entry point
1259	unsigned int norun; // searched thread : norun vector
1260	unsigned int trdid; // searched thread : thread identifier
1261
1262	// scan threads in vspace to find an inactive thread matching function
1263	unsigned int min = vspace[vspace_id].thread_offset;
1264	unsigned int max = min + vspace[vspace_id].threads;
1265	unsigned int found = 0;
1266	for ( thread_id = min ; (thread_id < max) && (found == 0) ; thread_id++ )
1267	{
1268	// get thread coordinates [cx,cy,lpid] and ltid from mapping
1269	ltid = thread[thread_id].ltid;
1270	clusterid = thread[thread_id].clusterid;
1271	lpid = thread[thread_id].proclocid;
1272	cx = cluster[clusterid].x;
1273	cy = cluster[clusterid].y;
1274
1275	// get thread scheduler pointer
1276	psched = _schedulers[cx][cy][lpid];
1277
1278	// get thread entry-point, norun-vector, and trdid from context
1279	entry = psched->context[ltid].slot[CTX_ENTRY_ID];
1280	norun = psched->context[ltid].slot[CTX_NORUN_ID];
1281	trdid = psched->context[ltid].slot[CTX_TRDID_ID];
1282
1283	// check matching
1284	if ( ((unsigned int)function == entry ) &&
1285	(norun & NORUN_MASK_THREAD) ) found = 1;
1286
1287	} // end loop on threads
1288
1289	if ( found ) // one matching inactive thread has been found
1290	{
1291	// set argument value in thread context
1292	if ( arg != NULL ) psched->context[ltid].slot[CTX_A0_ID] = (unsigned int)arg;
1293
1294	// activate thread
1295	psched->context[ltid].slot[CTX_NORUN_ID] = 0;
1296
1297	// return launched thead global identifier
1298	*buffer = trdid;
1299
1300	#if GIET_DEBUG_EXEC
1301	if ( _get_proctime() > GIET_DEBUG_EXEC )
1302	_printf("\n[DEBUG EXEC] _sys_pthread_create() at cycle %d\n"
1303	"P[%d,%d,%d] exit : thread %x launched in vspace %s\n",
1304	_get_proctime() , x , y , p , trdid , vspace[vspace_id].name );
1305	#endif
1306	return SYSCALL_OK;
1307	}
1308	else // no matching thread found
1309	{
1310	_printf("\n[GIET ERROR] in _sys_pthread_create() : "
1311	"no matching thread for entry = %x in vspace %s\n",
1312	(unsigned int)function , vspace[vspace_id].name );
1313
1314	return SYSCALL_THREAD_NOT_FOUND;
1315	}
1316
1317	} // end _sys_pthread_create()
1318
1319
1320	///////////////////////////////////////////
1321	int _sys_pthread_join( unsigned int trdid,
1322	void* ptr )
1323	{
1324	// ptr argument not supported
1325	if ( ptr != NULL )
1326	{
1327	_printf("\n[GIET ERROR] in _sys_pthread_join() : "
1328	"ptr argument not supported, must be NULL\n" );
1329
1330	return SYSCALL_PTHREAD_ARGUMENT_NOT_SUPPORTED;
1331	}
1332
1333	// get calling thread vspace
1334	unsigned int caller_vspace = _get_context_slot( CTX_VSID_ID );
1335
1336	#if GIET_DEBUG_EXEC
1337	unsigned int gpid = _get_procid();
1338	unsigned int cluster_xy = gpid >> P_WIDTH;
1339	unsigned int p = gpid & ((1<<P_WIDTH)-1);
1340	unsigned int x = cluster_xy >> Y_WIDTH;
1341	unsigned int y = cluster_xy & ((1<<Y_WIDTH)-1);
1342	if ( _get_proctime() > GIET_DEBUG_EXEC )
1343	_printf("\n[DEBUG EXEC] _sys_pthread_join() at cycle %d\n"
1344	"P[%d,%d,%d] enters for thread %x in vspace %d\n",
1345	_get_proctime() , x , y , p , trdid , caller_vspace );
1346	#endif
1347
1348	// get target thread indexes from trdid
1349	unsigned int cx = (trdid>>24) & 0xFF;
1350	unsigned int cy = (trdid>>16) & 0xFF;
1351	unsigned int lpid = (trdid>>8 ) & 0xFF;
1352	unsigned int ltid = (trdid ) & 0xFF;
1353
1354	// get target thread scheduler, vspace and registered trdid
1355	static_scheduler_t* psched = _schedulers[cx][cy][lpid];
1356	unsigned int target_vspace = psched->context[ltid].slot[CTX_VSID_ID];
1357	unsigned int registered_trdid = psched->context[ltid].slot[CTX_TRDID_ID];
1358
1359	// check trdid
1360	if ( trdid != registered_trdid )
1361	{
1362	_printf("\nerror in _sys_pthread_join() : "
1363	"trdid = %x / registered_trdid = %x\n",
1364	trdid , registered_trdid );
1365
1366	return SYSCALL_UNCOHERENT_THREAD_CONTEXT;
1367	}
1368
1369	// check calling thread and target thread in same vspace
1370	if ( caller_vspace != target_vspace )
1371	{
1372	_printf("\n[GIET ERROR] in _sys_pthread_join() : "
1373	" calling thread and target thread not in same vspace\n");
1374
1375	return SYSCALL_NOT_IN_SAME_VSPACE;
1376	}
1377
1378	// get target thread state
1379	unsigned int* pnorun = &psched->context[ltid].slot[CTX_NORUN_ID];
1380
1381	asm volatile ( "2000: \n"
1382	"move $11, %0 \n" /* $11 <= pnorun */
1383	"lw $11, 0($11) \n" /* $11 <= norun */
1384	"andi $11, $11, 1 \n" /* $11 <= norun & 0x1 */
1385	"beqz $11, 2000b \n"
1386	:
1387	: "r" (pnorun)
1388	: "$11" );
1389
1390	#if GIET_DEBUG_EXEC
1391	if ( _get_proctime() > GIET_DEBUG_EXEC )
1392	_printf("\n[DEBUG EXEC] _sys_pthread_join() at cycle %d\n"
1393	"P[%d,%d,%d] exit for thread %x in vspace %d\n",
1394	_get_proctime() , x , y , p , trdid , caller_vspace );
1395	#endif
1396
1397	return SYSCALL_OK;
1398
1399	} // end _sys_pthread_join()
1400
1401
1402	////////////////////////////////////////
1403	int _sys_pthread_kill( pthread_t trdid,
1404	int signal )
1405	{
1406	// get calling thread vspace
1407	unsigned int caller_vspace = _get_context_slot( CTX_VSID_ID );
1408
1409	#if GIET_DEBUG_EXEC
1410	unsigned int gpid = _get_procid();
1411	unsigned int cluster_xy = gpid >> P_WIDTH;
1412	unsigned int p = gpid & ((1<<P_WIDTH)-1);
1413	unsigned int x = cluster_xy >> Y_WIDTH;
1414	unsigned int y = cluster_xy & ((1<<Y_WIDTH)-1);
1415	if ( _get_proctime() > GIET_DEBUG_EXEC )
1416	_printf("\n[DEBUG EXEC] _sys_pthread_kill() at cycle %d\n"
1417	"P[%d,%d,%d] enters for thread %x in vspace %d\n",
1418	_get_proctime() , x , y , p , trdid , caller_vspace );
1419	#endif
1420
1421
1422	// get and check target thread indexes from trdid
1423	unsigned int cx = (trdid>>24) & 0xFF;
1424	unsigned int cy = (trdid>>16) & 0xFF;
1425	unsigned int lpid = (trdid>>8 ) & 0xFF;
1426	unsigned int ltid = (trdid ) & 0xFF;
1427
1428	// get target thread scheduler, vspace and registered trdid
1429	static_scheduler_t* psched = _schedulers[cx][cy][lpid];
1430	unsigned int target_vspace = psched->context[ltid].slot[CTX_VSID_ID];
1431	unsigned int registered_trdid = psched->context[ltid].slot[CTX_TRDID_ID];
1432
1433	// check trdid
1434	if ( trdid != registered_trdid )
1435	{
1436	_printf("\n[GIET ERROR] in _sys_pthread_kill() : trdid = %x"
1437	" / registered_trdid = %x\n", trdid , registered_trdid );
1438	return SYSCALL_UNCOHERENT_THREAD_CONTEXT;
1439	}
1440
1441	// check calling thread and target thread in same vspace
1442	if ( caller_vspace != target_vspace )
1443	{
1444	_printf("\n[GIET ERROR] in _sys_pthread_kill() : not in same vspace\n");
1445	return SYSCALL_NOT_IN_SAME_VSPACE;
1446	}
1447
1448	// register KILL signal in target thread context if required
1449	if ( signal )
1450	{
1451	_atomic_or( &psched->context[ltid].slot[CTX_SIGS_ID] , SIGS_MASK_KILL );
1452	}
1453
1454	#if GIET_DEBUG_EXEC
1455	if ( _get_proctime() > GIET_DEBUG_EXEC )
1456	_printf("\n[DEBUG EXEC] _sys_pthread_kill() at cycle %d\n"
1457	"P[%d,%d,%d] exit for thread %x in vspace %d\n",
1458	_get_proctime() , x , y , p , trdid , caller_vspace );
1459	#endif
1460
1461	return SYSCALL_OK;
1462
1463	} // end _sys_pthread_kill()
1464
1465
1466	/////////////////////////////////////
1467	int _sys_pthread_exit( void* string )
1468	{
1469	mapping_header_t * header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
1470	mapping_vspace_t * vspace = _get_vspace_base(header);
1471
1472	unsigned int ltid = _get_context_slot(CTX_LTID_ID);
1473	unsigned int trdid = _get_context_slot(CTX_TRDID_ID);
1474	unsigned int vsid = _get_context_slot(CTX_VSID_ID);
1475
1476	// print exit message
1477	if ( string != NULL )
1478	{
1479	_printf("\n[GIET WARNING] Exit thread %x in vspace %s\n"
1480	" Cause : %s\n\n",
1481	trdid , vspace[vsid].name , (char*) string );
1482	}
1483
1484	// get scheduler pointer for calling thread
1485	static_scheduler_t* psched = (static_scheduler_t*)_get_sched();
1486
1487	// register KILL signal in calling thread context (suicid request)
1488	_atomic_or( &psched->context[ltid].slot[CTX_SIGS_ID] , SIGS_MASK_KILL );
1489
1490	// deschedule calling thread
1491	unsigned int save_sr;
1492	_it_disable( &save_sr );
1493
1494	_ctx_switch();
1495
1496	return SYSCALL_OK;
1497
1498	} // end _sys_pthread_exit()
1499
1500	////////////////////////
1501	int _sys_pthread_yield()
1502	{
1503	unsigned int save_sr;
1504
1505	_it_disable( &save_sr );
1506	_ctx_switch();
1507	_it_restore( &save_sr );
1508
1509	return SYSCALL_OK;
1510	}
1511
1512	//////////////////////////////////////////////////
1513	int _sys_pthread_control( unsigned int command,
1514	char* vspace_name,
1515	char* thread_name )
1516	{
1517
1518	#if GIET_DEBUG_EXEC
1519	unsigned int gpid = _get_procid();
1520	unsigned int cluster_xy = gpid >> P_WIDTH;
1521	unsigned int p = gpid & ((1<<P_WIDTH)-1);
1522	unsigned int x = cluster_xy >> Y_WIDTH;
1523	unsigned int y = cluster_xy & ((1<<Y_WIDTH)-1);
1524	if ( _get_proctime() > GIET_DEBUG_EXEC )
1525	_printf("\n[DEBUG EXEC] _sys_pthread_control() at cycle %d\n"
1526	"P[%d,%d,%d] enter for vspace %s / thread %s / command = %d\n",
1527	_get_proctime() , x , y , p , vspace_name, thread_name, command );
1528	#endif
1529
1530	// get pointers in mapping
1531	mapping_header_t* header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
1532	mapping_thread_t* thread = _get_thread_base(header);
1533	mapping_vspace_t* vspace = _get_vspace_base(header);
1534	mapping_cluster_t* cluster = _get_cluster_base(header);
1535
1536	unsigned int found;
1537
1538	// search vspace name to get vspace index: vsid
1539	found = 0;
1540	unsigned int vsid;
1541	for( vsid = 0 ; vsid < header->vspaces ; vsid++ )
1542	{
1543	if ( _strcmp( vspace[vsid].name, vspace_name ) == 0 )
1544	{
1545	found = 1;
1546	break;
1547	}
1548	}
1549
1550	if ( found == 0 ) return SYSCALL_VSPACE_NOT_FOUND;
1551
1552	// search thread name in vspace to get thread index: tid
1553	found = 0;
1554	unsigned int tid;
1555	unsigned int min = vspace[vsid].thread_offset;
1556	unsigned int max = min + vspace[vsid].threads;
1557	for( tid = min ; tid < max ; tid++ )
1558	{
1559	if ( _strcmp( thread[tid].name, thread_name ) == 0 )
1560	{
1561	found = 1;
1562	break;
1563	}
1564	}
1565
1566	if ( found == 0 ) return SYSCALL_THREAD_NOT_FOUND;
1567
1568	// get target thread coordinates
1569	unsigned int cid = thread[tid].clusterid;
1570	unsigned int cx = cluster[cid].x;
1571	unsigned int cy = cluster[cid].y;
1572	unsigned int cp = thread[tid].proclocid;
1573	unsigned int ltid = thread[tid].ltid;
1574
1575	// get target thread scheduler
1576	static_scheduler_t* psched = _schedulers[cx][cy][cp];
1577
1578	// check trdid and vsid
1579	unsigned int trdid = cx<<24 \| cy<<16 \| cp<<8 \| ltid;
1580	if ( (psched->context[ltid].slot[CTX_TRDID_ID] != trdid) \|\|
1581	(psched->context[ltid].slot[CTX_VSID_ID] != vsid) )
1582	{
1583	return SYSCALL_UNCOHERENT_THREAD_CONTEXT;
1584	}
1585
1586	// execute command
1587	if ( command == THREAD_CMD_PAUSE )
1588	{
1589	_atomic_or ( &psched->context[ltid].slot[CTX_NORUN_ID], NORUN_MASK_THREAD );
1590	return SYSCALL_OK;
1591	}
1592	else if ( command == THREAD_CMD_RESUME )
1593	{
1594	_atomic_and( &psched->context[ltid].slot[CTX_NORUN_ID], ~NORUN_MASK_THREAD );
1595	return SYSCALL_OK;
1596	}
1597	else if ( command == THREAD_CMD_CONTEXT )
1598	{
1599	_user_printf( " - CTX_TRDID = %x\n"
1600	" - CTX_VSID = %x\n"
1601	" - CTX_EPC = %x\n"
1602	" - CTX_PTAB = %x\n"
1603	" - CTX_PTPR = %x\n"
1604	" - CTX_SR = %x\n"
1605	" - CTX_RA = %x\n"
1606	" - CTX_SP = %x\n"
1607	" - CTX_ENTRY = %x\n"
1608	" - CTX_NORUN = %x\n"
1609	" - CTX_SIGS = %x\n"
1610	" - CTX_LOCKS = %x\n"
1611	" - CTX_TTY = %x\n"
1612	" - CTX_NIC_RX = %x\n"
1613	" - CTX_NIC_TX = %x\n"
1614	" - CTX_CMA_RX = %x\n"
1615	" - CTX_CMA_TX = %x\n"
1616	" - CTX_CMA_FB = %x\n",
1617	psched->context[ltid].slot[CTX_TRDID_ID],
1618	psched->context[ltid].slot[CTX_VSID_ID],
1619	psched->context[ltid].slot[CTX_EPC_ID],
1620	psched->context[ltid].slot[CTX_PTAB_ID],
1621	psched->context[ltid].slot[CTX_PTPR_ID],
1622	psched->context[ltid].slot[CTX_SR_ID],
1623	psched->context[ltid].slot[CTX_RA_ID],
1624	psched->context[ltid].slot[CTX_SP_ID],
1625	psched->context[ltid].slot[CTX_ENTRY_ID],
1626	psched->context[ltid].slot[CTX_NORUN_ID],
1627	psched->context[ltid].slot[CTX_SIGS_ID],
1628	psched->context[ltid].slot[CTX_LOCKS_ID],
1629	psched->context[ltid].slot[CTX_TTY_ID],
1630	psched->context[ltid].slot[CTX_NIC_RX_ID],
1631	psched->context[ltid].slot[CTX_NIC_TX_ID],
1632	psched->context[ltid].slot[CTX_CMA_RX_ID],
1633	psched->context[ltid].slot[CTX_CMA_TX_ID],
1634	psched->context[ltid].slot[CTX_CMA_FB_ID] );
1635	return SYSCALL_OK;
1636	}
1637	else
1638	{
1639	return SYSCALL_ILLEGAL_THREAD_COMMAND_TYPE;
1640	}
1641
1642	} // end _sys_pthread_control()
1643
1644
1645
1646
1647	//////////////////////////////////////////////////////////////////////////////
1648	// Coprocessors related syscall handlers
1649	//////////////////////////////////////////////////////////////////////////////
1650
1651	//////////////////////////////////////////////////
1652	int _sys_coproc_alloc( unsigned int cluster_xy,
1653	unsigned int coproc_type,
1654	unsigned int* return_info )
1655	{
1656	mapping_header_t * header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
1657	mapping_cluster_t * cluster = _get_cluster_base(header);
1658	mapping_periph_t * periph = _get_periph_base(header);
1659
1660	// compute cluster coordinates and cluster index in mapping
1661	unsigned int y = cluster_xy & ((1<<Y_WIDTH)-1);
1662	unsigned int x = (cluster_xy>>Y_WIDTH) & ((1<<X_WIDTH)-1);
1663	unsigned int cluster_id = x * Y_SIZE + y;
1664
1665	// search coprocessor in cluster
1666	mapping_periph_t* found = NULL;
1667	unsigned int min = cluster[cluster_id].periph_offset;
1668	unsigned int max = min + cluster[cluster_id].periphs;
1669	unsigned int periph_id;
1670	for ( periph_id = min ; periph_id < max ; periph_id++ )
1671	{
1672	if ( (periph[periph_id].type == PERIPH_TYPE_MWR) &&
1673	(periph[periph_id].subtype == coproc_type) )
1674	{
1675	found = &periph[periph_id];
1676	break;
1677	}
1678	}
1679
1680	if ( found != NULL )
1681	{
1682	// get the lock
1683	_simple_lock_acquire( &_coproc_lock[cluster_id] );
1684
1685	// register coproc characteristics in kernel arrays
1686	_coproc_type[cluster_id] = coproc_type;
1687	_coproc_info[cluster_id] = (found->arg0 & 0xFF) \|
1688	(found->arg1 & 0xFF)<<8 \|
1689	(found->arg2 & 0xFF)<<16 \|
1690	(found->arg3 & 0xFF)<<24 ;
1691
1692	// returns coprocessor info
1693	*return_info = _coproc_info[cluster_id];
1694
1695	#if GIET_DEBUG_COPROC
1696	_printf("\n[DEBUG COPROC] _sys_coproc_alloc() at cycle %d\n"
1697	"type = %d in cluster[%d,%d] / coproc_info = %x\n",
1698	_get_proctime() , coproc_type, x , y , *return_info );
1699	#endif
1700	return SYSCALL_OK;
1701	}
1702	else
1703	{
1704	_printf("\n[GIET_ERROR] in _sys_coproc_alloc(): "
1705	"no coprocessor with type %d in cluster[%d,%d]\n",
1706	coproc_type , x , y );
1707
1708	return SYSCALL_COPROCESSOR_NOT_FOUND;
1709	}
1710	} // end _sys_coproc_alloc()
1711
1712	////////////////////////////////////////////////////////
1713	int _sys_coproc_release( unsigned int cluster_xy,
1714	unsigned int coproc_type )
1715	{
1716	// compute cluster coordinates and cluster index
1717	unsigned int y = cluster_xy & ((1<<Y_WIDTH)-1);
1718	unsigned int x = (cluster_xy>>Y_WIDTH) & ((1<<X_WIDTH)-1);
1719	unsigned int cluster_id = x * Y_SIZE + y;
1720
1721	// check coprocessor type
1722	if ( _coproc_type[cluster_id] != coproc_type )
1723	{
1724	_printf("\n[GIET_ERROR] in _sys_coproc_release(): "
1725	"no coprocessor of type %d allocated in cluster[%d,%d]\n",
1726	coproc_type, x , y );
1727
1728	return SYSCALL_COPROCESSOR_NON_ALLOCATED;
1729	}
1730
1731	unsigned int info = _coproc_info[cluster_id];
1732	unsigned int nb_to = info & 0xFF;
1733	unsigned int nb_from = (info>>8) & 0xFF;
1734	unsigned int channel;
1735
1736	// stops coprocessor and communication channels
1737	_mwr_set_coproc_register( cluster_xy , 0 , 0 );
1738	for ( channel = 0 ; channel < (nb_from + nb_to) ; channel++ )
1739	{
1740	_mwr_set_channel_register( cluster_xy , channel , MWR_CHANNEL_RUNNING , 0 );
1741	}
1742
1743	// release coprocessor lock
1744	_simple_lock_release( &_coproc_lock[cluster_id] );
1745
1746	#if GIET_DEBUG_COPROC
1747	_printf("\n[DEBUG COPROC] _sys_coproc_release() at cycle %d\n"
1748	"type = %d in cluster[%d,%d]\n",
1749	_get_proctime() , coproc_type , x , y );
1750	#endif
1751
1752	return SYSCALL_OK;
1753	} // end _sys_coproc_release()
1754
1755	////////////////////////////////////////////////////////////////
1756	int _sys_coproc_channel_init( unsigned int cluster_xy,
1757	unsigned int coproc_type,
1758	unsigned int channel,
1759	giet_coproc_channel_t* desc )
1760	{
1761	// compute cluster coordinates and cluster index
1762	unsigned int y = cluster_xy & ((1<<Y_WIDTH)-1);
1763	unsigned int x = (cluster_xy>>Y_WIDTH) & ((1<<X_WIDTH)-1);
1764	unsigned int cluster_id = x * Y_SIZE + y;
1765
1766	// check coprocessor type
1767	if ( _coproc_type[cluster_id] != coproc_type )
1768	{
1769	_printf("\n[GIET_ERROR] in _sys_coproc_release(): "
1770	"no coprocessor of type %d allocated in cluster[%d,%d]\n",
1771	coproc_type, x , y );
1772
1773	return SYSCALL_COPROCESSOR_NON_ALLOCATED;
1774	}
1775
1776	// check channel mode
1777	unsigned mode = desc->channel_mode;
1778	if ( (mode != MODE_MWMR) &&
1779	(mode != MODE_DMA_IRQ) &&
1780	(mode != MODE_DMA_NO_IRQ) )
1781	{
1782	_printf("\n[GIET_ERROR] in _sys_coproc_channel_init(): "
1783	"illegal mode\n");
1784
1785	return SYSCALL_COPROCESSOR_ILLEGAL_MODE;
1786	}
1787
1788	// get memory buffer size
1789	unsigned int size = desc->buffer_size;
1790
1791	// physical addresses
1792	unsigned long long buffer_paddr;
1793	unsigned int buffer_lsb;
1794	unsigned int buffer_msb;
1795	unsigned long long status_paddr = 0;
1796	unsigned int status_lsb;
1797	unsigned int status_msb;
1798	unsigned long long lock_paddr = 0;
1799	unsigned int lock_lsb;
1800	unsigned int lock_msb;
1801
1802	unsigned int flags; // unused
1803
1804	// compute memory buffer physical address
1805	buffer_paddr = _v2p_translate( desc->buffer_vaddr , &flags );
1806	buffer_lsb = (unsigned int)buffer_paddr;
1807	buffer_msb = (unsigned int)(buffer_paddr>>32);
1808
1809	// call MWMR_DMA driver
1810	_mwr_set_channel_register( cluster_xy, channel, MWR_CHANNEL_MODE, mode );
1811	_mwr_set_channel_register( cluster_xy, channel, MWR_CHANNEL_SIZE, size );
1812	_mwr_set_channel_register( cluster_xy, channel, MWR_CHANNEL_BUFFER_LSB, buffer_lsb );
1813	_mwr_set_channel_register( cluster_xy, channel, MWR_CHANNEL_BUFFER_MSB, buffer_msb );
1814
1815	if ( mode == MODE_MWMR )
1816	{
1817	// compute MWMR descriptor physical address
1818	status_paddr = _v2p_translate( desc->status_vaddr , &flags );
1819	status_lsb = (unsigned int)status_paddr;
1820	status_msb = (unsigned int)(status_paddr>>32);
1821
1822	// call MWMR_DMA driver
1823	_mwr_set_channel_register( cluster_xy, channel, MWR_CHANNEL_MWMR_LSB, status_lsb );
1824	_mwr_set_channel_register( cluster_xy, channel, MWR_CHANNEL_MWMR_MSB, status_msb );
1825
1826	// compute lock physical address
1827	lock_paddr = _v2p_translate( desc->lock_vaddr , &flags );
1828	lock_lsb = (unsigned int)lock_paddr;
1829	lock_msb = (unsigned int)(lock_paddr>>32);
1830
1831	// call MWMR_DMA driver
1832	_mwr_set_channel_register( cluster_xy, channel, MWR_CHANNEL_LOCK_LSB, lock_lsb );
1833	_mwr_set_channel_register( cluster_xy, channel, MWR_CHANNEL_LOCK_MSB, lock_msb );
1834	}
1835
1836	#if GIET_DEBUG_COPROC
1837	_printf("\n[DEBUG COPROC] _sys_coproc_channel_init() at cycle %d\n"
1838	"cluster[%d,%d] / channel = %d / mode = %d / buffer_size = %d\n"
1839	"buffer_vaddr = %x / status_vaddr = %x / lock_vaddr = %x\n"
1840	"buffer_paddr = %l / status_paddr = %l / lock_paddr = %l\n",
1841	_get_proctime() , x , y , channel , mode , size ,
1842	desc->buffer_vaddr, desc->status_vaddr, desc->lock_vaddr,
1843	buffer_paddr, status_paddr, lock_paddr );
1844	#endif
1845
1846	return SYSCALL_OK;
1847	} // end _sys_coproc_channel_init()
1848
1849	//////////////////////////////////////////////
1850	int _sys_coproc_run( unsigned int cluster_xy,
1851	unsigned int coproc_type )
1852	{
1853	// compute cluster coordinates and cluster index
1854	unsigned int y = cluster_xy & ((1<<Y_WIDTH)-1);
1855	unsigned int x = (cluster_xy>>Y_WIDTH) & ((1<<X_WIDTH)-1);
1856	unsigned int cluster_id = x * Y_SIZE + y;
1857
1858	// check coprocessor type
1859	if ( _coproc_type[cluster_id] != coproc_type )
1860	{
1861	_printf("\n[GIET_ERROR] in _sys_coproc_release(): "
1862	"no coprocessor of type %d allocated in cluster[%d,%d]\n",
1863	coproc_type, x , y );
1864
1865	return SYSCALL_COPROCESSOR_NON_ALLOCATED;
1866	}
1867
1868	unsigned int info = _coproc_info[cluster_id];
1869	unsigned int nb_to = info & 0xFF;
1870	unsigned int nb_from = (info>>8) & 0xFF;
1871	unsigned int mode = 0xFFFFFFFF;
1872	unsigned int channel;
1873
1874	// check channels modes, and register coprocessor running mode
1875	for ( channel = 0 ; channel < (nb_from + nb_to) ; channel++ )
1876	{
1877	unsigned int temp;
1878	temp = _mwr_get_channel_register( cluster_xy , channel , MWR_CHANNEL_MODE );
1879
1880	if ( mode == 0xFFFFFFFF )
1881	{
1882	mode = temp;
1883	}
1884	else if ( temp != mode )
1885	{
1886	_printf("\n[GIET_ERROR] in _sys_coproc_run(): "
1887	"channels don't have same mode in coprocessor[%d,%d]\n", x , y );
1888
1889	return SYSCALL_COPROCESSOR_ILLEGAL_MODE;
1890	}
1891	}
1892	_coproc_mode[cluster_id] = mode;
1893
1894	// start all communication channels
1895	for ( channel = 0 ; channel < (nb_from + nb_to) ; channel++ )
1896	{
1897	_mwr_set_channel_register( cluster_xy , channel , MWR_CHANNEL_RUNNING , 1 );
1898	}
1899
1900	//////////////////////////////////////////////////////////////////////////
1901	if ( (mode == MODE_MWMR) \|\| (mode == MODE_DMA_NO_IRQ) ) // no descheduling
1902	{
1903	// start coprocessor
1904	_mwr_set_coproc_register( cluster_xy , 0 , 1 );
1905
1906	#if GIET_DEBUG_COPROC
1907	if ( mode == MODE_MWMR )
1908	_printf("\n[DEBUG COPROC] _sys_coproc_run() at cycle %d\n"
1909	"type = %d / cluster[%d,%d] / MODE_MWMR\n",
1910	_get_proctime() , coproc_type , x , y );
1911	else
1912	_printf("\n[DEBUG COPROC] _sys_coproc_run() at cycle %d\n"
1913	"type = %d / cluster[%d,%d] / MODE_DMA_NO_IRQ\n",
1914	_get_proctime() , coproc_type , x , y );
1915	#endif
1916
1917	return SYSCALL_OK;
1918	}
1919	///////////////////////////////////////////////////////////////////////////
1920	else // mode == MODE_DMA_IRQ => descheduling
1921	{
1922	// register calling thread trdid
1923	unsigned int trdid = _get_thread_trdid();
1924	_coproc_trdid[cluster_id] = trdid;
1925
1926	// enters critical section
1927	unsigned int save_sr;
1928	_it_disable( &save_sr );
1929
1930	// set NORUN_MASK_COPROC bit
1931	static_scheduler_t* psched = _get_sched();
1932	unsigned int ltid = _get_thread_ltid();
1933	unsigned int* ptr = &psched->context[ltid].slot[CTX_NORUN_ID];
1934	_atomic_or( ptr , NORUN_MASK_COPROC );
1935
1936	// start coprocessor
1937	_mwr_set_coproc_register( cluster_xy , 0 , 1 );
1938
1939	#if GIET_DEBUG_COPROC
1940	_printf("\n[DEBUG COPROC] _sys_coproc_run() at cycle %d\n"
1941	"thread %x starts coprocessor / type = %d / cluster[%d,%d] / MODE_DMA_IRQ\n",
1942	_get_proctime() , trdid , coproc_type , x , y );
1943	#endif
1944
1945	// deschedule thread
1946	_ctx_switch();
1947
1948	#if GIET_DEBUG_COPROC
1949	_printf("\n[DEBUG COPROC] _sys_coproc_run() at cycle %d\n"
1950	"thread %x resume after coprocessor[%d,%d] completion\n",
1951	_get_proctime() , trdid , x , y );
1952	#endif
1953
1954	// restore SR
1955	_it_restore( &save_sr );
1956
1957	// return error computed by mwr_isr()
1958	return _coproc_error[cluster_id];
1959	}
1960	} // end _sys_coproc_run()
1961
1962	////////////////////////////////////////////////////
1963	int _sys_coproc_completed( unsigned int cluster_xy,
1964	unsigned int coproc_type )
1965	{
1966	// compute cluster coordinates and cluster index
1967	unsigned int y = cluster_xy & ((1<<Y_WIDTH)-1);
1968	unsigned int x = (cluster_xy>>Y_WIDTH) & ((1<<X_WIDTH)-1);
1969	unsigned int cluster_id = x * Y_SIZE + y;
1970
1971	// check coprocessor type
1972	if ( _coproc_type[cluster_id] != coproc_type )
1973	{
1974	_printf("\n[GIET_ERROR] in _sys_coproc_release(): "
1975	"no coprocessor of type %d allocated in cluster[%d,%d]\n",
1976	coproc_type, x , y );
1977
1978	return SYSCALL_COPROCESSOR_NON_ALLOCATED;
1979	}
1980
1981	unsigned int mode = _coproc_mode[cluster_id];
1982
1983	// analyse possible errors
1984	if ( mode == MODE_DMA_NO_IRQ )
1985	{
1986	unsigned int info = _coproc_info[cluster_id];
1987	unsigned int nb_to = info & 0xFF;
1988	unsigned int nb_from = (info>>8) & 0xFF;
1989	unsigned int error = 0;
1990	unsigned int channel;
1991	unsigned int status;
1992
1993	// get status for all channels, and signal reported errors
1994	for ( channel = 0 ; channel < (nb_to +nb_from) ; channel++ )
1995	{
1996	do
1997	{
1998	status = _mwr_get_channel_register( cluster_xy, channel,
1999	MWR_CHANNEL_STATUS );
2000	if ( status == MWR_CHANNEL_ERROR_DATA )
2001	{
2002	_printf("\n[GIET_ERROR] in _sys_coproc_completed(): "
2003	"channel %d / DATA_ERROR\n", channel );
2004	error = 1;
2005	}
2006	else if ( status == MWR_CHANNEL_ERROR_LOCK )
2007	{
2008	_printf("\n[GIET_ERROR] in _sys_coproc_completed()"
2009	" / channel %d / LOCK_ERROR\n", channel );
2010	error = 1;
2011	}
2012	else if ( status == MWR_CHANNEL_ERROR_DESC )
2013	{
2014	_printf("\n[GIET_ERROR] in _sys_coproc_completed()"
2015	" / channel %d / DESC_ERROR\n", channel );
2016	error = 1;
2017	}
2018	}
2019	while ( status == MWR_CHANNEL_BUSY );
2020
2021	// reset channel
2022	_mwr_set_channel_register( cluster_xy, channel, MWR_CHANNEL_RUNNING , 0 );
2023
2024	} // end for channels
2025
2026	if ( error )
2027	{
2028	return SYSCALL_COPROCESSOR_ILLEGAL_MODE;
2029	}
2030	else
2031	{
2032
2033	#if GIET_DEBUG_COPROC
2034	_printf("\n[DEBUG COPROC] _sys_coproc_completed() at cycle %d\n"
2035	"coprocessor type = %d / cluster[%d,%d] completes operation for thread %d\n",
2036	_get_proctime() , coproc_type , x , y , _get_thread_trdid() );
2037	#endif
2038	return SYSCALL_OK;
2039	}
2040	}
2041	else // mode == MODE_MWMR or MODE_DMA_IRQ
2042	{
2043	_printf("\n[GIET ERROR] in sys_coproc_completed(): "
2044	"coprocessor[%d,%d] is not running in MODE_DMA_NO_IRQ\n", x , y );
2045
2046	return SYSCALL_COPROCESSOR_ILLEGAL_MODE;
2047	}
2048	} // end _sys_coproc_completed()
2049
2050
2051	//////////////////////////////////////////////////////////////////////////////
2052	// TTY related syscall handlers
2053	//////////////////////////////////////////////////////////////////////////////
2054
2055	/////////////////////////////////////////
2056	int _sys_tty_alloc( unsigned int shared )
2057	{
2058	unsigned int channel = 0; // allocated TTY channel
2059
2060	// get vsid for the calling thread
2061	unsigned int vsid = _get_context_slot( CTX_VSID_ID );
2062
2063	mapping_header_t header = (mapping_header_t )SEG_BOOT_MAPPING_BASE;
2064	mapping_vspace_t *vspace = _get_vspace_base(header);
2065	mapping_thread_t *thread = _get_thread_base(header);
2066
2067	// compute number of users
2068	unsigned int users;
2069	if ( shared ) users = vspace[vsid].threads;
2070	else users = 1;
2071
2072	#if NB_TTY_CHANNELS > 1
2073	// get trdid for the calling thread
2074	unsigned int trdid = _get_thread_trdid();
2075
2076	// get a TTY channel
2077	for ( channel = 0 ; channel < NB_TTY_CHANNELS ; channel++ )
2078	{
2079	unsigned int* palloc = &_tty_channel_alloc[channel];
2080
2081	if ( _atomic_test_and_set( palloc , users ) == 0 ) break;
2082	}
2083	if ( ( channel >= NB_TTY_CHANNELS ) )
2084	{
2085	_printf("\n[GIET_ERROR] in _sys_tty_alloc() : "
2086	"no TTY channel available for thread %x\n", trdid );
2087	return SYSCALL_NO_CHANNEL_AVAILABLE;
2088	}
2089
2090	// initialise allocated TTY channel
2091	_tty_init( channel );
2092
2093	// allocate a WTI mailbox to the calling proc if external IRQ
2094	unsigned int wti_id;
2095	if ( USE_PIC ) _ext_irq_alloc( ISR_TTY_RX , channel , &wti_id );
2096
2097	// register wti_id and coordinates for processor receiving WTI
2098	unsigned int procid = _get_procid();
2099	unsigned int x = procid >> (Y_WIDTH + P_WIDTH);
2100	unsigned int y = (procid >> P_WIDTH) & ((1<<Y_WIDTH)-1);
2101	unsigned int p = procid & ((1<<P_WIDTH)-1);
2102	_tty_channel_wti[channel] = x<<24 \| y<<16 \| p<<8 \| wti_id;
2103
2104	#else
2105
2106	unsigned int* palloc = &_tty_channel_alloc[0];
2107	_atomic_increment( palloc, users );
2108
2109	#endif
2110
2111	// update CTX_TTY_ID
2112	if ( shared ) // for all threads in vspace
2113	{
2114	// scan threads in vspace
2115	unsigned int tid;
2116	for (tid = vspace[vsid].thread_offset;
2117	tid < (vspace[vsid].thread_offset + vspace[vsid].threads);
2118	tid++)
2119	{
2120	unsigned int y_size = header->y_size;
2121	unsigned int cid = thread[tid].clusterid;
2122	unsigned int x = cid / y_size;
2123	unsigned int y = cid % y_size;
2124	unsigned int p = thread[tid].proclocid;
2125	unsigned int ltid = thread[tid].ltid;
2126	static_scheduler_t* psched = (static_scheduler_t*)_schedulers[x][y][p];
2127
2128	psched->context[ltid].slot[CTX_TTY_ID] = channel;
2129	}
2130	}
2131	else // for calling thread only
2132	{
2133	_set_context_slot( CTX_TTY_ID, channel );
2134	}
2135
2136	return SYSCALL_OK;
2137	} // end _sys_tty_alloc()
2138
2139	//////////////////////
2140	int _sys_tty_release() // NOTE: not a syscall: used by _ctx_kill_thread()
2141	{
2142	unsigned int channel = _get_context_slot( CTX_TTY_ID );
2143
2144	if ( channel == -1 )
2145	{
2146	unsigned int trdid = _get_thread_trdid();
2147	_printf("\n[GIET_ERROR] in _sys_tty_release() : "
2148	"TTY channel already released for thread %x\n", trdid );
2149
2150	return SYSCALL_CHANNEL_ALREADY_ALLOCATED;
2151	}
2152
2153	// reset CTX_TTY_ID for the calling thread
2154	_set_context_slot( CTX_TTY_ID , 0xFFFFFFFF );
2155
2156	// atomically decrement the _tty_channel_allocator[] array
2157	_atomic_increment( &_tty_channel_alloc[channel] , -1 );
2158
2159	// release WTI mailbox if TTY channel no more used
2160	if ( USE_PIC && (_tty_channel_alloc[channel] == 0) )
2161	{
2162	_ext_irq_release( ISR_TTY_RX , channel );
2163	}
2164
2165	return SYSCALL_OK;
2166	} // end sys_tty_release()
2167
2168	////////////////////////////////////////
2169	int _sys_tty_write( const char* buffer,
2170	unsigned int length, // number of characters
2171	unsigned int channel) // channel index
2172	{
2173	unsigned int nwritten;
2174
2175	// compute and check tty channel
2176	if( channel == 0xFFFFFFFF ) channel = _get_context_slot(CTX_TTY_ID);
2177
2178	if( channel >= NB_TTY_CHANNELS )
2179	{
2180	_printf("\n[GIET_ERROR] in _sys_tty_write() : "
2181	"no TTY channel allocated for thread %x\n", _get_thread_trdid() );
2182
2183	return SYSCALL_CHANNEL_NON_ALLOCATED;
2184	}
2185
2186	// write string to TTY channel
2187	for (nwritten = 0; nwritten < length; nwritten++)
2188	{
2189	// check tty's status
2190	if ( _tty_get_register( channel, TTY_STATUS ) & 0x2 ) break;
2191
2192	// write one byte
2193	if (buffer[nwritten] == '\n')
2194	{
2195	_tty_set_register( channel, TTY_WRITE, (unsigned int)'\r' );
2196	}
2197	_tty_set_register( channel, TTY_WRITE, (unsigned int)buffer[nwritten] );
2198	}
2199
2200	return nwritten;
2201	}
2202
2203	///////////////////////////////////////
2204	int _sys_tty_read( char* buffer,
2205	unsigned int length, // unused
2206	unsigned int channel) // channel index
2207	{
2208	// compute and check tty channel
2209	if( channel == 0xFFFFFFFF ) channel = _get_context_slot(CTX_TTY_ID);
2210
2211	if( channel >= NB_TTY_CHANNELS )
2212	{
2213	_printf("\n[GIET_ERROR] in _sys_tty_read() : "
2214	"no TTY channel allocated for thread %x\n", _get_thread_trdid() );
2215
2216	return SYSCALL_CHANNEL_NON_ALLOCATED;
2217	}
2218
2219	unsigned int save_sr;
2220	unsigned int found = 0;
2221
2222	// get pointer on TTY_RX FIFO
2223	tty_fifo_t* fifo = &_tty_rx_fifo[channel];
2224
2225	// try to read one character from FIFO
2226	// blocked in while loop until success
2227	while ( found == 0 )
2228	{
2229	if ( fifo->sts == 0) // FIFO empty => deschedule
2230	{
2231	// enters critical section
2232	_it_disable( &save_sr );
2233
2234	// set NORUN_MASK_TTY bit for calling thread
2235	static_scheduler_t* psched = (static_scheduler_t*)_get_sched();
2236	unsigned int ltid = psched->current;
2237	_atomic_or( &psched->context[ltid].slot[CTX_NORUN_ID] , NORUN_MASK_TTY );
2238
2239	// register descheduling thread trdid
2240	fifo->trdid = _get_thread_trdid();
2241
2242	// deschedule calling thread
2243	_ctx_switch();
2244
2245	// exit critical section
2246	_it_restore( &save_sr );
2247	}
2248	else // FIFO not empty => get one character
2249	{
2250	*buffer = fifo->data[fifo->ptr];
2251	fifo->sts = fifo->sts - 1;
2252	fifo->ptr = (fifo->ptr + 1) % TTY_FIFO_DEPTH;
2253	found = 1;
2254	}
2255	}
2256
2257	return 1;
2258	}
2259
2260
2261
2262	//////////////////////////////////////////////////////////////////////////////
2263	// TIMER related syscall handlers
2264	//////////////////////////////////////////////////////////////////////////////
2265
2266	////////////////////
2267	int _sys_tim_alloc()
2268	{
2269
2270	#if NB_TIM_CHANNELS
2271
2272	unsigned int channel; // allocated TIMER channel
2273
2274	unsigned int trdid = _get_thread_trdid();
2275
2276	// check no TIMER already allocated to calling thread
2277	if ( _get_context_slot( CTX_TIM_ID ) < NB_TIM_CHANNELS )
2278	{
2279	_printf("\n[GIET_ERROR] in _sys_tim_alloc() : "
2280	"TIMER channel already allocated to thread %x\n", trdid );
2281
2282	return SYSCALL_CHANNEL_ALREADY_ALLOCATED;
2283	}
2284
2285	// get a TIMER channel
2286	for ( channel = 0 ; channel < NB_TIM_CHANNELS ; channel++ )
2287	{
2288	unsigned int* palloc = &_tim_channel_alloc[channel];
2289
2290	if ( _atomic_test_and_set( palloc , 1 ) == 0 ) break;
2291	}
2292	if ( channel >= NB_TIM_CHANNELS )
2293	{
2294	_printf("\n[GIET_ERROR] in _sys_tim_alloc() : "
2295	"no TIMER channel available for thread %x\n", trdid );
2296
2297	return SYSCALL_NO_CHANNEL_AVAILABLE;
2298	}
2299
2300	// allocate a WTI mailbox to the calling proc if external IRQ
2301	unsigned int wti_id;
2302	if ( USE_PIC ) _ext_irq_alloc( ISR_TIMER , channel , &wti_id );
2303
2304	// register wti_id and coordinates for processor receiving WTI
2305	unsigned int procid = _get_procid();
2306	unsigned int x = procid >> (Y_WIDTH + P_WIDTH);
2307	unsigned int y = (procid >> P_WIDTH) & ((1<<Y_WIDTH)-1);
2308	unsigned int p = procid & ((1<<P_WIDTH)-1);
2309	_tim_channel_wti[channel] = x<<24 \| y<<16 \| p<<8 \| wti_id;
2310
2311	// update CTX_TIM_ID in thread context
2312	_set_context_slot( CTX_TIM_ID, channel );
2313
2314	return SYSCALL_OK;
2315
2316	#else
2317
2318	_printf("\n[GIET ERROR] in _sys_tim_alloc(): NB_TIM_CHANNELS == 0\n");
2319
2320	return SYSCALL_NO_CHANNEL_AVAILABLE;
2321
2322	#endif
2323	} // end _sys_tim_alloc()
2324
2325
2326	//////////////////////
2327	int _sys_tim_release() // NOTE: not a syscall: used by _ctx_kill_thread()
2328	{
2329
2330	#if NB_TIM_CHANNELS
2331
2332	unsigned int channel = _get_context_slot( CTX_TIM_ID );
2333
2334	if ( channel == -1 )
2335	{
2336	unsigned int trdid = _get_thread_trdid();
2337	_printf("\n[GIET_ERROR] in _sys_tim_release(): "
2338	"TIMER channel already released for thread %x\n", trdid );
2339
2340	return SYSCALL_CHANNEL_ALREADY_ALLOCATED;
2341	}
2342
2343	// reset CTX_TIM_ID for the calling thread
2344	_set_context_slot( CTX_TIM_ID , 0xFFFFFFFF );
2345
2346	// reset the _tim_channel_alloc[] array
2347	_tim_channel_alloc[channel] = 0;
2348
2349	// release WTI mailbox if TTY channel no more used
2350	if ( USE_PIC )
2351	{
2352	_ext_irq_release( PERIPH_TYPE_TIM , channel );
2353	}
2354
2355	return SYSCALL_OK;
2356
2357	#else
2358
2359	_printf("\n[GIET ERROR] in _sys_tim_release(): NB_TIM_CHANNELS = 0\n");
2360
2361	return SYSCALL_NO_CHANNEL_AVAILABLE;
2362
2363	#endif
2364	} // end _sys_tim_release()
2365
2366	/////////////////////////////////////////
2367	int _sys_tim_start( unsigned int period )
2368	{
2369
2370	#if NB_TIM_CHANNELS
2371
2372	// get timer index
2373	unsigned int channel = _get_context_slot( CTX_TIM_ID );
2374
2375	if ( channel >= NB_TIM_CHANNELS )
2376	{
2377	_printf("\n[GIET_ERROR] in _sys_tim_start(): not enough TIM channels\n");
2378
2379	return SYSCALL_NO_CHANNEL_AVAILABLE;
2380	}
2381
2382	// start timer
2383	_timer_start( channel, period );
2384
2385	return SYSCALL_OK;
2386
2387	#else
2388
2389	_printf("\n[GIET ERROR] in _sys_tim_start() : NB_TIM_CHANNELS = 0\n");
2390
2391	return SYSCALL_NO_CHANNEL_AVAILABLE;
2392
2393	#endif
2394	}
2395
2396	///////////////////
2397	int _sys_tim_stop()
2398	{
2399
2400	#if NB_TIM_CHANNELS
2401
2402	// get timer index
2403	unsigned int channel = _get_context_slot( CTX_TIM_ID );
2404
2405	if ( channel >= NB_TIM_CHANNELS )
2406	{
2407	_printf("\n[GIET_ERROR] in _sys_tim_stop() : illegal timer index\n");
2408
2409	return SYSCALL_CHANNEL_NON_ALLOCATED;
2410	}
2411
2412	// stop timer
2413	_timer_stop( channel );
2414
2415	return SYSCALL_OK;
2416
2417	#else
2418
2419	_printf("\n[GIET ERROR] in _sys_tim_stop() : NB_TIM_CHANNELS = 0\n");
2420
2421	return SYSCALL_NO_CHANNEL_AVAILABLE;
2422
2423	#endif
2424	}
2425
2426
2427	//////////////////////////////////////////////////////////////////////////////
2428	// NIC related syscall handlers
2429	//////////////////////////////////////////////////////////////////////////////
2430
2431	#define NIC_CONTAINER_SIZE 4096
2432
2433	#if NB_NIC_CHANNELS && NB_CMA_CHANNELS
2434
2435	////////////////////////////////////////
2436	int _sys_nic_alloc( unsigned int is_rx,
2437	unsigned int xmax,
2438	unsigned int ymax )
2439	{
2440	mapping_header_t header = (mapping_header_t )SEG_BOOT_MAPPING_BASE;
2441	mapping_vspace_t *vspace = _get_vspace_base(header);
2442	mapping_thread_t *thread = _get_thread_base(header);
2443
2444	// get calling thread trdid, vspace index, and number of threads
2445	unsigned int trdid = _get_thread_trdid();
2446	unsigned int vsid = _get_context_slot( CTX_VSID_ID );
2447	unsigned int users = vspace[vsid].threads;
2448
2449	// check xmax / ymax parameters
2450	if ( (xmax > X_SIZE) \|\| (ymax > Y_SIZE) )
2451	{
2452	_printf("\n[GIET_ERROR] in _sys_nic_alloc() "
2453	"xmax or ymax argument too large for thread %x\n", trdid );
2454
2455	return SYSCALL_ILLEGAL_ARGUMENT;
2456	}
2457
2458	////////////////////////////////////////////////////////
2459	// Step 1: get and register CMA and NIC channel index //
2460	////////////////////////////////////////////////////////
2461
2462	unsigned int nic_channel;
2463	unsigned int cma_channel;
2464	unsigned int* palloc;
2465
2466	// get a NIC_RX or NIC_TX channel
2467	for ( nic_channel = 0 ; nic_channel < NB_NIC_CHANNELS ; nic_channel++ )
2468	{
2469	if ( is_rx ) palloc = &_nic_rx_channel_alloc[nic_channel];
2470	else palloc = &_nic_tx_channel_alloc[nic_channel];
2471
2472	if ( _atomic_test_and_set( palloc , users ) == 0 ) break;
2473	}
2474	if ( (nic_channel >= NB_NIC_CHANNELS) )
2475	{
2476	_printf("\n[GIET_ERROR] in _sys_nic_alloc() : "
2477	"no NIC channel available for thread %x\n", trdid );
2478
2479	return SYSCALL_NO_CHANNEL_AVAILABLE;
2480	}
2481
2482	// get a CMA channel
2483	for ( cma_channel = 0 ; cma_channel < NB_CMA_CHANNELS ; cma_channel++ )
2484	{
2485	palloc = &_cma_channel_alloc[cma_channel];
2486
2487	if ( _atomic_test_and_set( palloc , users ) == 0 ) break;
2488	}
2489	if ( cma_channel >= NB_CMA_CHANNELS )
2490	{
2491	_printf("\n[GIET_ERROR] in _sys_nic_alloc() : "
2492	"no CMA channel available for thread %x\n", trdid );
2493	if ( is_rx ) _nic_rx_channel_alloc[nic_channel] = 0;
2494	else _nic_tx_channel_alloc[nic_channel] = 0;
2495
2496	return SYSCALL_NO_CHANNEL_AVAILABLE;
2497	}
2498
2499	#if GIET_DEBUG_NIC
2500	_printf("\n[DEBUG NIC] sys_nic_alloc() at cycle %d\n"
2501	"thread %d get nic_channel = %d / cma_channel = %d\n",
2502	_get_proctime() , trdid , nic_channel , cma_channel );
2503	#endif
2504
2505	// register nic_index and cma_index in all threads
2506	// contexts that are in the same vspace
2507	unsigned int tid;
2508	for (tid = vspace[vsid].thread_offset;
2509	tid < (vspace[vsid].thread_offset + vspace[vsid].threads);
2510	tid++)
2511	{
2512	unsigned int y_size = header->y_size;
2513	unsigned int cid = thread[tid].clusterid;
2514	unsigned int x = cid / y_size;
2515	unsigned int y = cid % y_size;
2516	unsigned int p = thread[tid].proclocid;
2517	unsigned int ltid = thread[tid].ltid;
2518	static_scheduler_t* psched = (static_scheduler_t*)_schedulers[x][y][p];
2519
2520	if ( is_rx )
2521	{
2522	if ( (psched->context[ltid].slot[CTX_NIC_RX_ID] < NB_NIC_CHANNELS) \|\|
2523	(psched->context[ltid].slot[CTX_CMA_RX_ID] < NB_CMA_CHANNELS) )
2524	{
2525	_printf("\n[GIET_ERROR] in _sys_nic_alloc() : "
2526	"NIC_RX or CMA_RX channel already allocated for thread %x\n", trdid );
2527	_nic_rx_channel_alloc[nic_channel] = 0;
2528	_cma_channel_alloc[cma_channel] = 0;
2529
2530	return SYSCALL_CHANNEL_ALREADY_ALLOCATED;
2531	}
2532	else
2533	{
2534	psched->context[ltid].slot[CTX_NIC_RX_ID] = nic_channel;
2535	psched->context[ltid].slot[CTX_CMA_RX_ID] = cma_channel;
2536	}
2537	}
2538	else // is_tx
2539	{
2540	if ( (psched->context[ltid].slot[CTX_NIC_TX_ID] < NB_NIC_CHANNELS) \|\|
2541	(psched->context[ltid].slot[CTX_CMA_TX_ID] < NB_CMA_CHANNELS) )
2542	{
2543	_printf("\n[GIET_ERROR] in _sys_nic_alloc() : "
2544	"NIC_TX or CMA_TX channel already allocated for thread %x\n", trdid );
2545	_nic_tx_channel_alloc[nic_channel] = 0;
2546	_cma_channel_alloc[cma_channel] = 0;
2547
2548	return SYSCALL_CHANNEL_ALREADY_ALLOCATED;
2549	}
2550	else
2551	{
2552	psched->context[ltid].slot[CTX_NIC_TX_ID] = nic_channel;
2553	psched->context[ltid].slot[CTX_CMA_TX_ID] = cma_channel;
2554	}
2555	}
2556	} // end loop on threads
2557
2558	/////////////////////////////////////////////////////////////////////////////////
2559	// Step 2: loop on all the clusters //
2560	// Allocate the kernel containers and status, compute the container and the //
2561	// status physical addresses, fill and synchronize the kernel CHBUF descriptor //
2562	/////////////////////////////////////////////////////////////////////////////////
2563
2564	// physical addresses to be registered in the CMA registers
2565	unsigned long long nic_chbuf_pbase; // NIC chbuf physical address
2566	unsigned long long ker_chbuf_pbase; // kernel chbuf physical address
2567
2568	// allocate one kernel container and one status variable per cluster in the
2569	// (xmax / ymax) mesh
2570	unsigned int cx; // cluster X coordinate
2571	unsigned int cy; // cluster Y coordinate
2572	unsigned int index; // container index in chbuf
2573	unsigned int vaddr; // virtual address
2574	unsigned long long cont_paddr; // container physical address
2575	unsigned long long sts_paddr; // container status physical address
2576
2577	unsigned int flags; // for _v2p_translate()
2578
2579	for ( cx = 0 ; cx < xmax ; cx++ )
2580	{
2581	for ( cy = 0 ; cy < ymax ; cy++ )
2582	{
2583	// compute index in chbuf
2584	index = (cx * ymax) + cy;
2585
2586	// allocate the kernel container
2587	vaddr = (unsigned int)_remote_malloc( NIC_CONTAINER_SIZE, cx, cy );
2588
2589	if ( vaddr == 0 ) // not enough kernel heap memory in cluster[cx,cy]
2590	{
2591	_printf("\n[GIET_ERROR] in _sys_nic_alloc() : "
2592	"not enough kernel heap in cluster[%d,%d]\n", cx, cy );
2593
2594	return SYSCALL_OUT_OF_KERNEL_HEAP_MEMORY;
2595	}
2596
2597	// compute container physical address
2598	cont_paddr = _v2p_translate( vaddr , &flags );
2599
2600	// checking container address alignment
2601	if ( cont_paddr & 0x3F )
2602	{
2603	_printf("\n[GIET ERROR] in _sys_nic_alloc() : "
2604	"container address in cluster[%d,%d] not aligned\n", cx, cy);
2605
2606	return SYSCALL_ADDRESS_NON_ALIGNED;
2607	}
2608
2609	#if GIET_DEBUG_NIC
2610	_printf("\n[DEBUG NIC] _sys_nic_alloc() at cycle %d\n"
2611	"thread %x allocates a container in cluster[%d,%d] / vaddr = %x / paddr = %l\n",
2612	-get_proctime() , trdid , cx , cy , vaddr, cont_paddr );
2613	#endif
2614
2615	// allocate the kernel container status
2616	// it occupies 64 bytes but only last bit is useful (1 for full and 0 for empty)
2617	vaddr = (unsigned int)_remote_malloc( 64, cx, cy );
2618
2619	if ( vaddr == 0 ) // not enough kernel heap memory in cluster[cx,cy]
2620	{
2621	_printf("\n[GIET_ERROR] in _sys_nic_alloc() : "
2622	"not enough kernel heap in cluster[%d,%d]\n", cx, cy );
2623
2624	return SYSCALL_OUT_OF_KERNEL_HEAP_MEMORY;
2625	}
2626
2627	// compute status physical address
2628	sts_paddr = _v2p_translate( vaddr , &flags );
2629
2630	// checking status address alignment
2631	if ( sts_paddr & 0x3F )
2632	{
2633	_printf("\n[GIET ERROR] in _sys_nic_alloc() : "
2634	"status address in cluster[%d,%d] not aligned\n", cx, cy);
2635
2636	return SYSCALL_ADDRESS_NON_ALIGNED;
2637	}
2638
2639	// initialize chbuf entry
2640	// The buffer descriptor has the following structure:
2641	// - the 26 LSB bits contain bits[6:31] of the buffer physical address
2642	// - the 26 following bits contain bits[6:31] of the physical address where the
2643	// buffer status is located
2644	// - the 12 MSB bits contain the common address extension of the buffer and its
2645	// status
2646	if ( is_rx )
2647	_nic_ker_rx_chbuf[nic_channel].buf_desc[index] =
2648	(unsigned long long)
2649	((sts_paddr & 0xFFFFFFFFULL) >> 6) +
2650	(((cont_paddr & 0xFFFFFFFFFFFULL) >> 6) << 26);
2651	else
2652	_nic_ker_tx_chbuf[nic_channel].buf_desc[index] =
2653	(unsigned long long)
2654	((sts_paddr & 0xFFFFFFC0ULL) >> 6) +
2655	(((cont_paddr & 0xFFFFFFFFFC0ULL) >> 6) << 26);
2656
2657	#if GIET_DEBUG_NIC
2658	_printf("\n[DEBUG NIC] _sys_nic_alloc() at cycle %d\n"
2659	"thread %x allocates a status in cluster[%d,%d] / vaddr = %x / paddr = %l\n"
2660	" descriptor = %l\n",
2661	_get_proctime() , trdid , cx , cy , vaddr, sts_paddr,
2662	(unsigned long long)((sts_paddr & 0xFFFFFFFFULL) >> 6) +
2663	(((cont_paddr & 0xFFFFFFFFFFFULL) >> 6) << 26) );
2664	#endif
2665	}
2666	}
2667
2668	// complete kernel chbuf initialisation
2669	if ( is_rx )
2670	{
2671	_nic_ker_rx_chbuf[nic_channel].xmax = xmax;
2672	_nic_ker_rx_chbuf[nic_channel].ymax = ymax;
2673	}
2674	else
2675	{
2676	_nic_ker_tx_chbuf[nic_channel].xmax = xmax;
2677	_nic_ker_tx_chbuf[nic_channel].ymax = ymax;
2678	}
2679
2680	// compute the kernel chbuf descriptor physical address
2681	if ( is_rx ) vaddr = (unsigned int)( &_nic_ker_rx_chbuf[nic_channel] );
2682	else vaddr = (unsigned int)( &_nic_ker_tx_chbuf[nic_channel] );
2683
2684	ker_chbuf_pbase = _v2p_translate( vaddr , &flags );
2685
2686	#if GIET_DEBUG_NIC
2687	_printf("\n[DEBUG NIC] _sys_nic_alloc() at cycle %d\n"
2688	"thread %x initialise kernel chbuf / vaddr = %x / paddr = %l\n",
2689	_get_proctime() , trdid , vaddr , ker_chbuf_pbase );
2690	#endif
2691
2692	// sync the kernel chbuf in L2 after write in L2
2693	_mmc_sync( ker_chbuf_pbase, sizeof( nic_chbuf_t ) );
2694
2695	///////////////////////////////////////////////////////////////
2696	// Step 3: compute the NIC chbuf descriptor physical address //
2697	///////////////////////////////////////////////////////////////
2698
2699	unsigned int offset;
2700	if ( is_rx ) offset = 0x4100;
2701	else offset = 0x4110;
2702	nic_chbuf_pbase = (((unsigned long long)((X_IO << Y_WIDTH) + Y_IO))<<32) \|
2703	(SEG_NIC_BASE + (nic_channel<<15) + offset);
2704
2705	#if GIET_DEBUG_NIC
2706	_printf("\n[DEBUG NIC] _sys_nic_alloc() at cycle %d\n"
2707	"thread %x get NIC chbuf paddr = %l\n",
2708	_get_proctime() , trdid , nic_chbuf_pbase );
2709	#endif
2710
2711	////////////////////////////////////////////////////////////////////////////////
2712	// Step 4: initialize CMA registers defining the source & destination chbufs //
2713	////////////////////////////////////////////////////////////////////////////////
2714
2715	if ( is_rx ) // NIC to kernel
2716	{
2717	_cma_set_register( cma_channel, CHBUF_SRC_DESC , (unsigned int)(nic_chbuf_pbase) );
2718	_cma_set_register( cma_channel, CHBUF_SRC_EXT , (unsigned int)(nic_chbuf_pbase>>32) );
2719	_cma_set_register( cma_channel, CHBUF_SRC_NBUFS, 2 );
2720	_cma_set_register( cma_channel, CHBUF_DST_DESC , (unsigned int)(ker_chbuf_pbase) );
2721	_cma_set_register( cma_channel, CHBUF_DST_EXT , (unsigned int)(ker_chbuf_pbase>>32) );
2722	_cma_set_register( cma_channel, CHBUF_DST_NBUFS, xmax * ymax );
2723	}
2724	else // kernel to NIC
2725	{
2726	_cma_set_register( cma_channel, CHBUF_SRC_DESC , (unsigned int)(ker_chbuf_pbase) );
2727	_cma_set_register( cma_channel, CHBUF_SRC_EXT , (unsigned int)(ker_chbuf_pbase>>32) );
2728	_cma_set_register( cma_channel, CHBUF_SRC_NBUFS, xmax * ymax );
2729	_cma_set_register( cma_channel, CHBUF_DST_DESC , (unsigned int)(nic_chbuf_pbase) );
2730	_cma_set_register( cma_channel, CHBUF_DST_EXT , (unsigned int)(nic_chbuf_pbase>>32) );
2731	_cma_set_register( cma_channel, CHBUF_DST_NBUFS, 2 );
2732	}
2733
2734	#if GIET_DEBUG_NIC
2735	_printf("\n[DEBUG NIC] _sys_nic_alloc() at cycle %d\n"
2736	"thread %x exit\n",
2737	_get_proctime() , trdid );
2738	#endif
2739
2740	return SYSCALL_OK;
2741	} // end _sys_nic_alloc()
2742
2743
2744	//////////////////////////////////////////
2745	int _sys_nic_release( unsigned int is_rx ) // NOTE: not a syscall: used by _ctx_kill_thread()
2746	{
2747	unsigned int trdid = _get_thread_trdid();
2748
2749	unsigned int nic_channel;
2750	unsigned int cma_channel;
2751
2752	// update the kernel tables
2753	if ( is_rx )
2754	{
2755	nic_channel = _get_context_slot( CTX_NIC_RX_ID );
2756	cma_channel = _get_context_slot( CTX_CMA_RX_ID );
2757
2758	if ( (nic_channel >= NB_NIC_CHANNELS) )
2759	{
2760	_printf("\n[GIET ERROR] in _sys_nic_release() : "
2761	"NIC_RX channel already released for thread %x\n", trdid );
2762
2763	return SYSCALL_CHANNEL_NON_ALLOCATED;
2764	}
2765	if ( (cma_channel >= NB_CMA_CHANNELS) )
2766	{
2767	_printf("\n[GIET ERROR] in _sys_nic_release() : "
2768	"CMA_RX channel already released for thread %x\n", trdid );
2769
2770	return SYSCALL_CHANNEL_NON_ALLOCATED;
2771	}
2772
2773	// atomically decrement the NIC and CMA channel allocators
2774	_atomic_increment( &_nic_rx_channel_alloc[nic_channel] , -1 );
2775	_atomic_increment( &_cma_channel_alloc[cma_channel] , -1 );
2776
2777	// stop the NIC and CMA peripherals channels if no more users
2778	if ( (_nic_rx_channel_alloc[nic_channel] == 0) &&
2779	(_cma_channel_alloc[cma_channel] == 0) ) _sys_nic_stop( 1 );
2780
2781	// reset the calling thread context slots
2782	_set_context_slot( CTX_NIC_RX_ID , 0xFFFFFFFF );
2783	_set_context_slot( CTX_CMA_RX_ID , 0xFFFFFFFF );
2784	}
2785	else
2786	{
2787	nic_channel = _get_context_slot( CTX_NIC_TX_ID );
2788	cma_channel = _get_context_slot( CTX_CMA_TX_ID );
2789
2790	if ( (nic_channel >= NB_NIC_CHANNELS) )
2791	{
2792	_printf("\n[GIET ERROR] in _sys_nic_release() : "
2793	"NIC_TX channel already released for thread %x\n", trdid );
2794
2795	return SYSCALL_CHANNEL_NON_ALLOCATED;
2796	}
2797	if ( (cma_channel >= NB_CMA_CHANNELS) )
2798	{
2799	_printf("\n[GIET ERROR] in _sys_nic_release() : "
2800	"CMA_TX channel already released for thread %x\n", trdid );
2801
2802	return SYSCALL_CHANNEL_NON_ALLOCATED;
2803	}
2804
2805	// atomically decrement the NIC and CMA channel allocators
2806	_atomic_increment( &_nic_tx_channel_alloc[nic_channel] , -1 );
2807	_atomic_increment( &_cma_channel_alloc[cma_channel] , -1 );
2808
2809	// stop the NIC and CMA peripherals channels if no more users
2810	if ( (_nic_tx_channel_alloc[nic_channel] == 0) &&
2811	(_cma_channel_alloc[cma_channel] == 0) ) _sys_nic_stop( 0 );
2812
2813	// reset the calling thread context slots
2814	_set_context_slot( CTX_NIC_TX_ID , 0xFFFFFFFF );
2815	_set_context_slot( CTX_CMA_TX_ID , 0xFFFFFFFF );
2816	}
2817
2818	return SYSCALL_OK;
2819	} // end sys_nic_release()
2820
2821
2822	////////////////////////////////////////
2823	int _sys_nic_start( unsigned int is_rx )
2824	{
2825	unsigned int trdid = _get_context_slot( CTX_TRDID_ID );
2826
2827	unsigned int nic_channel;
2828	unsigned int cma_channel;
2829
2830	// get NIC channel index and CMA channel index from thread context
2831	if ( is_rx )
2832	{
2833	nic_channel = _get_context_slot( CTX_NIC_RX_ID );
2834	cma_channel = _get_context_slot( CTX_CMA_RX_ID );
2835	}
2836	else
2837	{
2838	nic_channel = _get_context_slot( CTX_NIC_TX_ID );
2839	cma_channel = _get_context_slot( CTX_CMA_TX_ID );
2840	}
2841
2842	#if GIET_DEBUG_NIC
2843	_printf("\n[DEBUG NIC] _sys_nic_start() at cycle %d\n"
2844	"thread %x enter / NIC channel = %d / CMA channel = %d\n",
2845	_get_proctime() , trdid , nic_channel, cma_channel );
2846	#endif
2847
2848	// check NIC and CMA channels index
2849	if ( nic_channel >= NB_NIC_CHANNELS )
2850	{
2851	_printf("\n[GIET_ERROR] in _sys_nic_start() : "
2852	"illegal NIC channel for thread %x\n", trdid );
2853	return -1111;
2854	}
2855	if ( cma_channel >= NB_CMA_CHANNELS )
2856	{
2857	_printf("\n[GIET_ERROR] in _sys_nic_start() : "
2858	"illegal CMA channel for thread %x\n", trdid );
2859	return -1111;
2860	}
2861
2862	// start CMA transfer
2863	_cma_set_register( cma_channel, CHBUF_BUF_SIZE , NIC_CONTAINER_SIZE );
2864	_cma_set_register( cma_channel, CHBUF_PERIOD , 0 ); // OUT_OF_ORDER
2865	_cma_set_register( cma_channel, CHBUF_RUN , MODE_NORMAL );
2866
2867	// activates NIC channel
2868	_nic_channel_start( nic_channel, is_rx, GIET_NIC_MAC4, GIET_NIC_MAC2 );
2869
2870	#if GIET_DEBUG_NIC
2871	_printf("\n[DEBUG NIC] _sys_nic_start() at cycle %d\n"
2872	"thread %d exit\n",
2873	_get_proctime() , trdid );
2874	#endif
2875
2876	return SYSCALL_OK;
2877	} // end _sys_nic_start()
2878
2879
2880	//////////////////////////////////////
2881	int _sys_nic_move( unsigned int is_rx,
2882	void* buffer )
2883	{
2884	unsigned int trdid = _get_context_slot( CTX_TRDID_ID );
2885
2886	unsigned int channel;
2887
2888	#if GIET_DEBUG_NIC
2889	_printf("\n[DEBUG NIC] _sys_nic_move() at cycle %d\n",
2890	"thread %x enters\n",
2891	_get_proctime() , trdid );
2892	#endif
2893
2894	// get NIC channel index from thread context
2895	if ( is_rx ) channel = _get_context_slot( CTX_NIC_RX_ID );
2896	else channel = _get_context_slot( CTX_NIC_TX_ID );
2897
2898	// check NIC channel index
2899	if ( channel >= NB_NIC_CHANNELS )
2900	{
2901	_printf("\n[GIET_ERROR] in _sys_nic_move() : "
2902	"NIC channel non allocated for thread %x\n", trdid );
2903
2904	return SYSCALL_CHANNEL_NON_ALLOCATED;
2905	}
2906
2907	// get kernel chbuf virtual address
2908	nic_chbuf_t* ker_chbuf;
2909	if ( is_rx ) ker_chbuf = &_nic_ker_rx_chbuf[channel];
2910	else ker_chbuf = &_nic_ker_tx_chbuf[channel];
2911
2912	// get xmax / ymax parameters
2913	unsigned int xmax = ker_chbuf->xmax;
2914	unsigned int ymax = ker_chbuf->ymax;
2915
2916	// get cluster coordinates for the processor running the calling thread
2917	unsigned int procid = _get_procid();
2918	unsigned int cx = procid >> (Y_WIDTH + P_WIDTH);
2919	unsigned int cy = (procid >> P_WIDTH) & ((1<<Y_WIDTH)-1);
2920
2921	// check processor coordinates / (xmax,ymax)
2922	if ( (cx >= xmax) \|\| (cy >= ymax) )
2923	{
2924	_printf("\n[GIET_ERROR] in _sys_nic_move(): "
2925	"processor coordinates [%d,%d] larger than (xmax,ymax) = [%d,%d]\n",
2926	cx , cy , xmax , ymax );
2927
2928	return SYSCALL_ILLEGAL_ARGUMENT;
2929	}
2930
2931	unsigned long long usr_buf_paddr; // user buffer physical address
2932	unsigned long long ker_buf_paddr; // kernel buffer physical address
2933	unsigned long long ker_sts_paddr; // kernel buffer status physical address
2934	unsigned long long ker_buf_desc; // kernel buffer descriptor
2935	unsigned int ker_sts; // kernel buffer status (full or empty)
2936	unsigned int index; // kernel buffer index in chbuf
2937	unsigned int flags; // for _v2P_translate
2938
2939	// Compute user buffer physical address and check access rights
2940	usr_buf_paddr = _v2p_translate( (unsigned int)buffer , &flags );
2941
2942	if ( (flags & PTE_U) == 0 )
2943	{
2944	_printf("\n[GIET ERROR] in _sys_nic_tx_move() : "
2945	"buffer address non user accessible\n");
2946
2947	return SYSCALL_ADDRESS_NON_USER_ACCESSIBLE;
2948	}
2949
2950	#if GIET_DEBUG_NIC
2951	_printf("\n[DEBUG NIC] _sys_nic_move() at cycle %d\n"
2952	"thread %x get user buffer : paddr = %l\n",
2953	_get_proctime() , trdid , usr_buf_paddr );
2954	#endif
2955
2956	// compute buffer index, buffer descriptor paddr and buffer status paddr
2957	index = (ymax * cx) + cy;
2958	ker_buf_desc = ker_chbuf->buf_desc[index];
2959	ker_sts_paddr = ((ker_buf_desc & 0xFFF0000000000000ULL) >> 20) +
2960	((ker_buf_desc & 0x3FFFFFFULL) << 6);
2961
2962	#if GIET_DEBUG_NIC
2963	_printf("\n[DEBUG NIC] _sys_nic_move() at cycle %d\n"
2964	"thread %x get ker_buf_desc %d / paddr = %l\n",
2965	_get_proctime(), trdid , index , ker_buf_desc );
2966	#endif
2967
2968	// poll local kernel container status until success
2969	while ( 1 )
2970	{
2971	// inval buffer descriptor in L2 before read in L2
2972	_mmc_inval( ker_sts_paddr, 4 );
2973	ker_sts = _physical_read( ker_sts_paddr );
2974
2975	#if GIET_DEBUG_NIC
2976	_printf("\n[DEBUG NIC] _sys_nic_move() at cycle %d\n"
2977	"thread %x get status %d / paddr = %l / status = %x\n",
2978	_get_proctime() , trdid , index , ker_sts_paddr, ker_sts );
2979	#endif
2980
2981	// test buffer status and break if found
2982	if ( ( is_rx != 0 ) && ( ker_sts == 0x1 ) ) break;
2983	if ( ( is_rx == 0 ) && ( ker_sts == 0 ) ) break;
2984	}
2985
2986	// compute kernel buffer physical address
2987	ker_buf_paddr = (ker_buf_desc & 0xFFFFFFFFFC000000ULL) >> 20;
2988
2989	// move one container
2990	if ( is_rx ) // RX transfer
2991	{
2992	// inval kernel buffer in L2 before read in L2
2993	_mmc_inval( ker_buf_paddr, NIC_CONTAINER_SIZE );
2994
2995	// transfer data from kernel buffer to user buffer
2996	_physical_memcpy( usr_buf_paddr,
2997	ker_buf_paddr,
2998	NIC_CONTAINER_SIZE );
2999	#if GIET_DEBUG_NIC
3000	_printf("\n[DEBUG NIC] _sys_nic_move() at cycle %d\n"
3001	"thread %x transfer kernel buffer %l to user buffer %l\n",
3002	_get_proctime() , trdid , ker_buf_paddr , usr_buf_paddr );
3003	#endif
3004
3005	}
3006	else // TX transfer
3007	{
3008	// transfer data from user buffer to kernel buffer
3009	_physical_memcpy( ker_buf_paddr,
3010	usr_buf_paddr,
3011	NIC_CONTAINER_SIZE );
3012
3013	// sync kernel buffer in L2 after write in L2
3014	_mmc_sync( ker_buf_paddr, NIC_CONTAINER_SIZE );
3015
3016	#if GIET_DEBUG_NIC
3017	_printf("\n[DEBUG NIC] _sys_nic_move() at cycle %d\n"
3018	"thread %x transfer user buffer %l to kernel buffer %l\n",
3019	_get_proctime() , trdid , usr_buf_paddr , ker_buf_paddr );
3020	#endif
3021
3022	}
3023
3024	// update kernel chbuf status
3025	if ( is_rx ) _physical_write ( ker_sts_paddr, 0 );
3026	else _physical_write ( ker_sts_paddr, 0x1 );
3027
3028	// sync kernel chbuf in L2 after write in L2
3029	_mmc_sync( ker_sts_paddr, 4 );
3030
3031	#if GIET_DEBUG_NIC
3032	_printf("\n[DEBUG NIC] _sys_nic_move() at cycle %d\n"
3033	"thread %x exit\n",
3034	_get_proctime() , trdid );
3035	#endif
3036
3037	return SYSCALL_OK;
3038	} // end _sys_nic_move()
3039
3040
3041	///////////////////////////////////////
3042	int _sys_nic_stop( unsigned int is_rx )
3043	{
3044	unsigned int trdid = _get_context_slot( CTX_TRDID_ID );
3045
3046	unsigned int nic_channel;
3047	unsigned int cma_channel;
3048
3049	// get NIC channel index and CMA channel index
3050	if ( is_rx )
3051	{
3052	nic_channel = _get_context_slot( CTX_NIC_RX_ID );
3053	cma_channel = _get_context_slot( CTX_CMA_RX_ID );
3054	}
3055	else
3056	{
3057	nic_channel = _get_context_slot( CTX_NIC_TX_ID );
3058	cma_channel = _get_context_slot( CTX_CMA_TX_ID );
3059	}
3060
3061	// check NIC and CMA channels index
3062	if ( nic_channel >= NB_NIC_CHANNELS )
3063	{
3064	_printf("\n[GIET_ERROR] in _sys_nic_stop() : "
3065	"NIC channel non allocated for thread %x\n", trdid );
3066
3067	return SYSCALL_CHANNEL_NON_ALLOCATED;
3068	}
3069	if ( cma_channel >= NB_CMA_CHANNELS )
3070	{
3071	_printf("\n[GIET_ERROR] in _sys_nic_stop() : "
3072	"CMA channel non allocated for thread %x\n", trdid );
3073
3074	return SYSCALL_CHANNEL_NON_ALLOCATED;
3075	}
3076
3077	// desactivates the CMA channel
3078	_cma_set_register( cma_channel, CHBUF_RUN , MODE_IDLE );
3079
3080	// wait until CMA channel IDLE
3081	unsigned int volatile status;
3082	do
3083	{
3084	status = _cma_get_register( cma_channel, CHBUF_STATUS );
3085	}
3086	while ( status );
3087
3088	// desactivates the NIC channel
3089	_nic_channel_stop( nic_channel, is_rx );
3090
3091	return SYSCALL_OK;
3092	} // end _sys_nic_stop()
3093
3094	////////////////////////////////////////
3095	int _sys_nic_clear( unsigned int is_rx )
3096	{
3097	unsigned int trdid = _get_context_slot( CTX_TRDID_ID );
3098
3099	unsigned int channel;
3100
3101	// get NIC channel
3102	if ( is_rx ) channel = _get_context_slot( CTX_NIC_RX_ID );
3103	else channel = _get_context_slot( CTX_NIC_TX_ID );
3104
3105	if ( channel >= NB_NIC_CHANNELS )
3106	{
3107	_printf("\n[GIET_ERROR] in _sys_nic_clear() : "
3108	"NIC channel non allocated for thread %x\n", trdid );
3109
3110	return SYSCALL_CHANNEL_NON_ALLOCATED;
3111	}
3112
3113	if ( is_rx )
3114	{
3115	_nic_set_global_register( NIC_G_NPKT_RX_G2S_RECEIVED , 0 );
3116	_nic_set_global_register( NIC_G_NPKT_RX_DES_TOO_SMALL , 0 );
3117	_nic_set_global_register( NIC_G_NPKT_RX_DES_TOO_BIG , 0 );
3118	_nic_set_global_register( NIC_G_NPKT_RX_DES_MFIFO_FULL , 0 );
3119	_nic_set_global_register( NIC_G_NPKT_RX_DES_CRC_FAIL , 0 );
3120	_nic_set_global_register( NIC_G_NPKT_RX_DISPATCH_RECEIVED , 0 );
3121	_nic_set_global_register( NIC_G_NPKT_RX_DISPATCH_BROADCAST , 0 );
3122	_nic_set_global_register( NIC_G_NPKT_RX_DISPATCH_DST_FAIL , 0 );
3123	_nic_set_global_register( NIC_G_NPKT_RX_DISPATCH_CH_FULL , 0 );
3124	}
3125	else
3126	{
3127	_nic_set_global_register( NIC_G_NPKT_TX_DISPATCH_RECEIVED , 0 );
3128	_nic_set_global_register( NIC_G_NPKT_TX_DISPATCH_TRANSMIT , 0 );
3129	_nic_set_global_register( NIC_G_NPKT_TX_DISPATCH_TOO_BIG , 0 );
3130	_nic_set_global_register( NIC_G_NPKT_TX_DISPATCH_TOO_SMALL , 0 );
3131	_nic_set_global_register( NIC_G_NPKT_TX_DISPATCH_SRC_FAIL , 0 );
3132	_nic_set_global_register( NIC_G_NPKT_TX_DISPATCH_BYPASS , 0 );
3133	_nic_set_global_register( NIC_G_NPKT_TX_DISPATCH_BROADCAST , 0 );
3134	}
3135	return SYSCALL_OK;
3136	} // en _sys_nic_clear()
3137
3138	////////////////////////////////////////
3139	int _sys_nic_stats( unsigned int is_rx )
3140	{
3141	unsigned int trdid = _get_context_slot( CTX_TRDID_ID );
3142
3143	unsigned int nic_channel;
3144
3145	// get NIC channel
3146	if ( is_rx ) nic_channel = _get_context_slot( CTX_NIC_RX_ID );
3147	else nic_channel = _get_context_slot( CTX_NIC_TX_ID );
3148
3149	if ( nic_channel >= NB_NIC_CHANNELS )
3150	{
3151	_printf("\n[GIET_ERROR] in _sys_nic_stats() : "
3152	"NIC channel non allocated for thread %x\n", trdid );
3153
3154	return SYSCALL_CHANNEL_NON_ALLOCATED;
3155	}
3156
3157	if ( is_rx )
3158	{
3159	unsigned int received = _nic_get_global_register( NIC_G_NPKT_RX_G2S_RECEIVED );
3160	unsigned int too_small = _nic_get_global_register( NIC_G_NPKT_RX_DES_TOO_SMALL );
3161	unsigned int too_big = _nic_get_global_register( NIC_G_NPKT_RX_DES_TOO_BIG );
3162	unsigned int fifo_full = _nic_get_global_register( NIC_G_NPKT_RX_DES_MFIFO_FULL );
3163	unsigned int crc_fail = _nic_get_global_register( NIC_G_NPKT_RX_DES_CRC_FAIL );
3164	unsigned int broadcast = _nic_get_global_register( NIC_G_NPKT_RX_DISPATCH_BROADCAST );
3165	unsigned int dst_fail = _nic_get_global_register( NIC_G_NPKT_RX_DISPATCH_DST_FAIL );
3166	unsigned int ch_full = _nic_get_global_register( NIC_G_NPKT_RX_DISPATCH_CH_FULL );
3167
3168	_printf("\n### Network Controller RX Statistics ###\n"
3169	"- packets received : %d\n"
3170	"- too small : %d\n"
3171	"- too big : %d\n"
3172	"- fifo full : %d\n"
3173	"- crc fail : %d\n"
3174	"- dst mac fail : %d\n"
3175	"- channel full : %d\n"
3176	"- broadcast : %d\n",
3177	received,
3178	too_small,
3179	too_big,
3180	fifo_full,
3181	crc_fail,
3182	dst_fail,
3183	ch_full,
3184	broadcast );
3185	}
3186	else
3187	{
3188	unsigned int received = _nic_get_global_register( NIC_G_NPKT_TX_DISPATCH_RECEIVED );
3189	unsigned int too_big = _nic_get_global_register( NIC_G_NPKT_TX_DISPATCH_TOO_BIG );
3190	unsigned int too_small = _nic_get_global_register( NIC_G_NPKT_TX_DISPATCH_TOO_SMALL );
3191	unsigned int src_fail = _nic_get_global_register( NIC_G_NPKT_TX_DISPATCH_SRC_FAIL );
3192	unsigned int bypass = _nic_get_global_register( NIC_G_NPKT_TX_DISPATCH_BYPASS );
3193	unsigned int broadcast = _nic_get_global_register( NIC_G_NPKT_TX_DISPATCH_BROADCAST );
3194
3195	_printf("\n### Network Controller TX Statistics ###\n"
3196	"- packets received : %d\n"
3197	"- too small : %d\n"
3198	"- too big : %d\n"
3199	"- src mac fail : %d\n"
3200	"- bypass : %d\n"
3201	"- broadcast : %d\n",
3202	received,
3203	too_big,
3204	too_small,
3205	src_fail,
3206	bypass,
3207	broadcast );
3208	}
3209	return SYSCALL_OK;
3210	} // end _sys_nic_stats()
3211
3212	#endif // if NB_NIC_CHANNELS && NB_CMA_CHANNELS
3213
3214	/////////////////////////////////////////////////////////////////////////////////////////
3215	// FBF related syscall handlers
3216	/////////////////////////////////////////////////////////////////////////////////////////
3217
3218	//////////////////////////////////////
3219	int _sys_fbf_size( unsigned int* width,
3220	unsigned int* height )
3221	{
3222	if ( USE_FBF == 0 )
3223	{
3224	*width = 0;
3225	*height = 0;
3226	}
3227	else
3228	{
3229	*width = FBUF_X_SIZE;
3230	*height = FBUF_Y_SIZE;
3231	}
3232
3233	return SYSCALL_OK;
3234	}
3235
3236	////////////////////
3237	int _sys_fbf_alloc()
3238	{
3239	mapping_header_t header = (mapping_header_t )SEG_BOOT_MAPPING_BASE;
3240	mapping_vspace_t *vspace = _get_vspace_base(header);
3241	mapping_thread_t *thread = _get_thread_base(header);
3242
3243	// compute number of users
3244	unsigned int vsid = _get_context_slot(CTX_VSID_ID);
3245	unsigned int users = vspace[vsid].threads;
3246
3247	// access FBF allocator
3248	// register it in all threads contexts
3249	if ( _atomic_test_and_set( &_fbf_alloc , users ) == 0 ) // FBF available
3250	{
3251	unsigned int min = vspace[vsid].thread_offset;
3252	unsigned int max = min + users;
3253	unsigned int tid;
3254	for ( tid = min ; tid < max ; tid++ )
3255	{
3256	unsigned int y_size = header->y_size;
3257	unsigned int cid = thread[tid].clusterid;
3258	unsigned int x = cid / y_size;
3259	unsigned int y = cid % y_size;
3260	unsigned int p = thread[tid].proclocid;
3261	unsigned int ltid = thread[tid].ltid;
3262	static_scheduler_t* psched = (static_scheduler_t*)_schedulers[x][y][p];
3263	_atomic_or( &psched->context[ltid].slot[CTX_LOCKS_ID] , LOCKS_MASK_FBF );
3264	}
3265	return SYSCALL_OK;
3266	}
3267	else // FBF already allocated
3268	{
3269	return SYSCALL_SHARED_PERIPHERAL_BUSY;
3270	}
3271	}
3272
3273	//////////////////////
3274	int _sys_fbf_release() // not a syscall: used by _ctx_kill_thread()
3275	{
3276	// get calling thread scheduler, ltid and trdid
3277	static_scheduler_t* psched = _get_sched();
3278	unsigned int ltid = _get_thread_ltid();
3279	unsigned int trdid = _get_thread_trdid();
3280
3281	if ( (psched->context[ltid].slot[CTX_LOCKS_ID] & LOCKS_MASK_FBF) == 0 )
3282	{
3283	_printf("\n[GIET ERROR] in _sys_fbf_release() : "
3284	"FBF not allocated to thread %x\n", trdid );
3285
3286	return SYSCALL_CHANNEL_NON_ALLOCATED;
3287	}
3288
3289	// decrement FBF allocator
3290	// reset the calling thread context
3291	_atomic_increment( &_fbf_alloc , 0xFFFFFFFF );
3292	_atomic_and( &psched->context[ltid].slot[CTX_LOCKS_ID] , ~LOCKS_MASK_FBF );
3293
3294	return SYSCALL_OK;
3295	}
3296
3297	/////////////////////////////////////////////
3298	int _sys_fbf_sync_write( unsigned int offset,
3299	void* buffer,
3300	unsigned int length )
3301	{
3302	// get calling thread scheduler, ltid and trdid
3303	static_scheduler_t* psched = _get_sched();
3304	unsigned int ltid = _get_thread_ltid();
3305	unsigned int trdid = _get_thread_trdid();
3306
3307	if ( (psched->context[ltid].slot[CTX_LOCKS_ID] & LOCKS_MASK_FBF) == 0 )
3308	{
3309	_printf("\n[GIET ERROR] in _sys_fbf_release() : "
3310	"FBF not allocated to thread %x\n", trdid );
3311
3312	return SYSCALL_CHANNEL_NON_ALLOCATED;
3313	}
3314
3315	char* fbf_address = (char *)SEG_FBF_BASE + offset;
3316	memcpy( fbf_address, buffer, length);
3317
3318	return SYSCALL_OK;
3319	}
3320
3321	/////////////////////////////////////////////
3322	int _sys_fbf_sync_read( unsigned int offset,
3323	void* buffer,
3324	unsigned int length )
3325	{
3326	// get calling thread scheduler, ltid and trdid
3327	static_scheduler_t* psched = _get_sched();
3328	unsigned int ltid = _get_thread_ltid();
3329	unsigned int trdid = _get_thread_trdid();
3330
3331	if ( (psched->context[ltid].slot[CTX_LOCKS_ID] & LOCKS_MASK_FBF) == 0 )
3332	{
3333	_printf("\n[GIET ERROR] in _sys_fbf_release() : "
3334	"FBF not allocated to thread %x\n", trdid );
3335
3336	return SYSCALL_CHANNEL_NON_ALLOCATED;
3337	}
3338
3339	char* fbf_address = (char *)SEG_FBF_BASE + offset;
3340	memcpy( buffer, fbf_address, length);
3341
3342	return SYSCALL_OK;
3343	}
3344
3345	#if NB_CMA_CHANNELS
3346
3347	////////////////////////////////////////////
3348	int _sys_fbf_cma_alloc( unsigned int nbufs )
3349	{
3350	// compute trdid and vsid for the calling thread
3351	unsigned int vsid = _get_context_slot( CTX_VSID_ID );
3352	unsigned int trdid = _get_thread_trdid();
3353
3354	if ( _get_context_slot( CTX_CMA_FB_ID ) < NB_CMA_CHANNELS )
3355	{
3356	_printf("\n[GIET ERROR] in _sys_fbf_cma_alloc() : "
3357	"CMA channel already allocated for thread %x\n", trdid );
3358	return SYSCALL_CHANNEL_ALREADY_ALLOCATED;
3359	}
3360
3361	// compute number of threads in vspace from mapping
3362	mapping_header_t header = (mapping_header_t )SEG_BOOT_MAPPING_BASE;
3363	mapping_vspace_t *vspace = _get_vspace_base(header);
3364	mapping_thread_t *thread = _get_thread_base(header);
3365	unsigned int first = vspace[vsid].thread_offset;
3366	unsigned int threads = vspace[vsid].threads;
3367
3368	// get a CMA channel
3369	unsigned int channel;
3370	for ( channel = 0 ; channel < NB_CMA_CHANNELS ; channel++ )
3371	{
3372	unsigned int* palloc = &_cma_channel_alloc[channel];
3373	if ( _atomic_test_and_set( palloc , threads ) == 0 ) break;
3374	}
3375
3376	if ( channel >= NB_CMA_CHANNELS )
3377	{
3378	_printf("\n[GIET ERROR] in _sys_fbf_cma_alloc() : no CMA channel available\n");
3379	return SYSCALL_NO_CHANNEL_AVAILABLE;
3380	}
3381
3382	// check nbufs argument
3383	if ( nbufs > 256 )
3384	{
3385	_printf("\n[GIET ERROR] in _sys_fbf_cma_alloc() : nbufs larger than 256\n");
3386	return SYSCALL_ILLEGAL_ARGUMENT;
3387	}
3388
3389	// loop on all threads to register channel in thread contexts
3390	unsigned int tid;
3391	for ( tid = first ; tid < (first + threads) ; tid++ )
3392	{
3393	unsigned int y_size = header->y_size;
3394	unsigned int cid = thread[tid].clusterid;
3395	unsigned int x = cid / y_size;
3396	unsigned int y = cid % y_size;
3397	unsigned int p = thread[tid].proclocid;
3398	unsigned int ltid = thread[tid].ltid;
3399	static_scheduler_t* psched = (static_scheduler_t*)_schedulers[x][y][p];
3400	psched->context[ltid].slot[CTX_CMA_FB_ID] = channel;
3401	}
3402
3403	unsigned int vaddr;
3404	unsigned int flags;
3405
3406	// compute frame buffer physical addresses
3407	vaddr = (unsigned int)SEG_FBF_BASE;
3408	unsigned long long fbf_buf_paddr = _v2p_translate( vaddr , &flags );
3409
3410	// initialize the FBF chbuf
3411	// we don't register a status address in the fbf_desc, because
3412	// the CMA does not test the status for the frame buffer (no synchro)
3413	_fbf_ker_chbuf.nbufs = nbufs;
3414	_fbf_ker_chbuf.fbf_desc = (((fbf_buf_paddr & 0xFFFFFFFFFFFULL) >> 6 ) << 26);
3415
3416	// register FBF chbuf physical address
3417	vaddr = (unsigned int)(&_fbf_ker_chbuf);
3418	_fbf_chbuf_paddr = _v2p_translate( vaddr , &flags );
3419
3420	#if GIET_DEBUG_FBF_CMA
3421	_printf("\n[FBF_CMA DEBUG] _sys_fbf_cma_alloc()\n"
3422	" - channel = %d\n"
3423	" - vaddr(_ker_fbf_chbuf) = %x\n"
3424	" - paddr(_ker_fbf_chbuf) = %l\n"
3425	" - nbufs = %d\n"
3426	" - fbf_desc = %l\n",
3427	channel , vaddr , _fbf_chbuf_paddr , nbufs , _fbf_ker_chbuf.fbf_desc );
3428	#endif
3429
3430	return SYSCALL_OK;
3431	} // end sys_fbf_cma_alloc()
3432
3433	//////////////////////////
3434	int _sys_fbf_cma_release() // Not a syscall : used by _ctx_kill_thread()
3435	{
3436	unsigned int channel = _get_context_slot( CTX_CMA_FB_ID );
3437	unsigned int trdid = _get_thread_trdid();
3438
3439	if ( channel >= NB_CMA_CHANNELS )
3440	{
3441	_printf("\n[GIET_ERROR] in _sys_fbf_cma_release() : "
3442	"CMA_FB channel already released for thread %x\n", trdid );
3443
3444	return SYSCALL_CHANNEL_NON_ALLOCATED;
3445	}
3446
3447	if ( _cma_channel_alloc[channel] == 1 ) // the calling thread is the last user
3448	{
3449	// stop the CMA transfer
3450	_sys_fbf_cma_stop();
3451
3452	// reset the CMA channel allocator
3453	_cma_channel_alloc[channel] = 0;
3454	}
3455	else // not the last user
3456	{
3457	// atomically decrement the CMA channel allocator
3458	_atomic_increment( &_cma_channel_alloc[channel] , -1 );
3459	}
3460
3461	// reset CTX_CMA_FB_ID slot in calling thread context
3462	_set_context_slot( CTX_CMA_FB_ID, 0xFFFFFFFF );
3463
3464	return SYSCALL_OK;
3465	} // end _sys_fbf_cma_release()
3466
3467	///////////////////////////////////////////////////
3468	int _sys_fbf_cma_init_buf( unsigned int index,
3469	void* buf_vaddr,
3470	void* sts_vaddr )
3471	{
3472	unsigned int vaddr; // virtual address
3473	unsigned int flags; // for _v2p_translate()
3474	unsigned long long buf_paddr; // user buffer physical address
3475	unsigned long long sts_paddr; // user status physical address
3476
3477	// get calling thread scheduler, ltid and trdid
3478	static_scheduler_t* psched = _get_sched();
3479	unsigned int ltid = _get_thread_ltid();
3480	unsigned int trdid = _get_thread_trdid();
3481
3482	// check FBF allocated
3483	if ( (psched->context[ltid].slot[CTX_LOCKS_ID] & LOCKS_MASK_FBF) == 0 )
3484	{
3485	_printf("\n[GIET ERROR] in _sys_fbf_cma_init_buf() : "
3486	"FBF not allocated to thread %x\n", trdid );
3487
3488	return SYSCALL_CHANNEL_NON_ALLOCATED;
3489	}
3490
3491	// get channel index
3492	unsigned int channel = _get_context_slot( CTX_CMA_FB_ID );
3493
3494	if ( channel >= NB_CMA_CHANNELS )
3495	{
3496	_printf("\n[GIET ERROR] in _sys_fbf_cma_init_buf() : "
3497	"CMA channel non allocated to thread %x\n", trdid );
3498
3499	return SYSCALL_CHANNEL_NON_ALLOCATED;
3500	}
3501
3502	#if GIET_DEBUG_FBF_CMA
3503	_printf("\n[FBF_CMA DEBUG] _sys_fbf_cma_init_buf()\n"
3504	" - channel = %d / index = %d\n"
3505	" - buf vaddr = %x\n"
3506	" - sts vaddr = %x\n",
3507	channel, index,
3508	(unsigned int)buf_vaddr,
3509	(unsigned int)sts_vaddr );
3510	#endif
3511
3512	// checking index argument
3513	if ( index >= _fbf_ker_chbuf.nbufs )
3514	{
3515	_printf("\n[GIET ERROR] in _sys_fbf_cma_init_buf() : "
3516	"user buffer index too large %x\n", trdid );
3517
3518	return SYSCALL_CHANNEL_NON_ALLOCATED;
3519	}
3520
3521	// checking user buffer and status addresses alignment
3522	if ( ((unsigned int)buf_vaddr & 0x3F) \|\| ((unsigned int)sts_vaddr & 0x3F) )
3523	{
3524	_printf("\n[GIET ERROR] in _sys_fbf_cma_init_buf() : "
3525	"user buffer or status not aligned for thread %x\n", trdid );
3526
3527	return SYSCALL_ADDRESS_NON_ALIGNED;
3528	}
3529
3530	// Compute user buffer and status physical addresses
3531	vaddr = (unsigned int)buf_vaddr;
3532	buf_paddr = _v2p_translate( vaddr , &flags );
3533	if ((flags & PTE_U) == 0)
3534	{
3535	_printf("\n[GIET ERROR] in _sys_fbf_cma_init_buf() : "
3536	"buffer not in user space for thread %x\n", trdid );
3537
3538	return SYSCALL_ADDRESS_NON_USER_ACCESSIBLE;
3539	}
3540
3541	vaddr = (unsigned int)sts_vaddr;
3542	sts_paddr = _v2p_translate( vaddr , &flags );
3543	if ((flags & PTE_U) == 0)
3544	{
3545	_printf("\n[GIET ERROR] in _sys_fbf_cma_init_buf() : "
3546	"status not in user space for thread %x\n", trdid);
3547
3548	return SYSCALL_ADDRESS_NON_USER_ACCESSIBLE;
3549	}
3550
3551	// check user buffer and user status in same cluster
3552	if ( (buf_paddr & 0xFF00000000ULL) != (sts_paddr & 0xFF00000000ULL) )
3553	{
3554	_printf("\n[GIET ERROR] in _sys_fbf_cma_init_buf() : "
3555	"user status and buffer not in same cluster for thread %x\n", trdid);
3556
3557	return SYSCALL_ADDRESS_NON_USER_ACCESSIBLE;
3558	}
3559
3560	// initialize _fbf_ker_chbuf.usr_desc[index]
3561	_fbf_ker_chbuf.usr_desc[index] = ((sts_paddr & 0xFFFFFFFFULL) >> 6) +
3562	(((buf_paddr & 0xFFFFFFFFFFULL) >> 6 ) << 26);
3563
3564	#if GIET_DEBUG_FBF_CMA
3565	_printf(" - buf paddr = %l\n"
3566	" - sts paddr = %l\n"
3567	" - usr_desc[%d] = %l\n",
3568	buf_paddr,
3569	sts_paddr,
3570	index , _fbf_ker_chbuf.usr_desc[index] );
3571	#endif
3572
3573	return SYSCALL_OK;
3574
3575	} // end sys_fbf_cma_init_buf()
3576
3577	////////////////////////
3578	int _sys_fbf_cma_start()
3579	{
3580	// get calling thread scheduler, ltid and trdid
3581	static_scheduler_t* psched = _get_sched();
3582	unsigned int ltid = _get_thread_ltid();
3583	unsigned int trdid = _get_thread_trdid();
3584
3585	// check FBF allocated
3586	if ( (psched->context[ltid].slot[CTX_LOCKS_ID] & LOCKS_MASK_FBF) == 0 )
3587	{
3588	_printf("\n[GIET ERROR] in _sys_fbf_release() : "
3589	"FBF not allocated to thread %x\n", trdid );
3590
3591	return SYSCALL_CHANNEL_NON_ALLOCATED;
3592	}
3593
3594	// get CMA channel index
3595	unsigned int channel = _get_context_slot( CTX_CMA_FB_ID );
3596
3597	if ( channel >= NB_CMA_CHANNELS )
3598	{
3599	_printf("\n[GIET ERROR] in _fbf_cma_start() : "
3600	"CMA channel non allocated\n");
3601
3602	return SYSCALL_CHANNEL_NON_ALLOCATED;
3603	}
3604
3605	// check buffers initialization
3606	if ( _fbf_ker_chbuf.nbufs == 0 )
3607	{
3608	_printf("\n[GIET ERROR] in _sys_fbf_cma_start(): "
3609	"FBF chbuf not initialized for thread %x\n", trdid );
3610
3611	return SYSCALL_MISSING_INITIALISATION;
3612	}
3613
3614	// synchronize FBF chbuf that will be read by CMA peripheral
3615	if ( USE_IOB )
3616	{
3617	// SYNC request for fbf_chbuf descriptor
3618	_mmc_sync( _fbf_chbuf_paddr , sizeof( fbf_chbuf_t ) );
3619	}
3620
3621	// start CMA transfer
3622	unsigned long long paddr = _fbf_chbuf_paddr;
3623	unsigned int dst_chbuf_paddr_lsb = (unsigned int)(paddr & 0xFFFFFFFF);
3624	unsigned int dst_chbuf_paddr_ext = (unsigned int)(paddr >> 32);
3625	unsigned int src_chbuf_paddr_lsb = dst_chbuf_paddr_lsb + 8;
3626	unsigned int src_chbuf_paddr_ext = dst_chbuf_paddr_ext;
3627
3628	#if GIET_DEBUG_FBF_CMA
3629	_printf("\n[FBF_CMA DEBUG] _sys_fbf_cma_start()\n"
3630	" - src_chbuf_paddr_lsb = %x\n"
3631	" - src_chbuf_paddr_ext = %x\n"
3632	" - src_chbuf_nbufs = %d\n"
3633	" - dst_chbuf_paddr_lsb = %x\n"
3634	" - dst_chbuf_paddr_ext = %x\n"
3635	" - dst_chbuf_nbufs = 1 \n"
3636	" - buffer_size = %d\n",
3637	src_chbuf_paddr_lsb,
3638	src_chbuf_paddr_ext,
3639	_fbf_ker_chbuf.nbufs,
3640	dst_chbuf_paddr_lsb,
3641	dst_chbuf_paddr_ext,
3642	FBUF_X_SIZE * FBUF_Y_SIZE );
3643	#endif
3644
3645	_cma_set_register( channel, CHBUF_SRC_DESC , src_chbuf_paddr_lsb );
3646	_cma_set_register( channel, CHBUF_SRC_EXT , src_chbuf_paddr_ext );
3647	_cma_set_register( channel, CHBUF_SRC_NBUFS, _fbf_ker_chbuf.nbufs );
3648	_cma_set_register( channel, CHBUF_DST_DESC , dst_chbuf_paddr_lsb );
3649	_cma_set_register( channel, CHBUF_DST_EXT , dst_chbuf_paddr_ext );
3650	_cma_set_register( channel, CHBUF_DST_NBUFS, 1 );
3651	_cma_set_register( channel, CHBUF_BUF_SIZE , FBUF_X_SIZE*FBUF_Y_SIZE );
3652	_cma_set_register( channel, CHBUF_PERIOD , 1000 );
3653	_cma_set_register( channel, CHBUF_RUN , MODE_NO_DST_SYNC );
3654
3655	return SYSCALL_OK;
3656
3657	} // end _sys_fbf_cma_start()
3658
3659	////////////////////////////////////////////
3660	int _sys_fbf_cma_check( unsigned int index )
3661	{
3662	// get calling thread scheduler, ltid and trdid
3663	static_scheduler_t* psched = _get_sched();
3664	unsigned int ltid = _get_thread_ltid();
3665	unsigned int trdid = _get_thread_trdid();
3666
3667	// check FBF allocated
3668	if ( (psched->context[ltid].slot[CTX_LOCKS_ID] & LOCKS_MASK_FBF) == 0 )
3669	{
3670	_printf("\n[GIET ERROR] in _sys_fbf_cma_check() : "
3671	"FBF not allocated to thread %x\n", trdid );
3672
3673	return SYSCALL_CHANNEL_NON_ALLOCATED;
3674	}
3675
3676	// get channel index
3677	unsigned int channel = _get_context_slot( CTX_CMA_FB_ID );
3678
3679	if ( channel >= NB_CMA_CHANNELS )
3680	{
3681	_printf("\n[GIET ERROR] in _sys_fbf_cma_check() : "
3682	"CMA channel non allocated to thread %x\n", trdid );
3683
3684	return SYSCALL_CHANNEL_NON_ALLOCATED;
3685	}
3686
3687	// check buffer index
3688	if ( index >= _fbf_ker_chbuf.nbufs )
3689	{
3690	_printf("\n[GIET ERROR] in _sys_fbf_cma_check() : "
3691	"buffer index too large for thread %x\n", trdid );
3692
3693	return SYSCALL_CHANNEL_NON_ALLOCATED;
3694	}
3695
3696	// compute user buffer status physical addresses
3697	unsigned long long usr_sts_paddr;
3698	fbf_chbuf_t* pdesc = &_fbf_ker_chbuf;
3699	usr_sts_paddr = ((pdesc->usr_desc[index] & 0xFFF0000000000000ULL) >> 20) +
3700	((pdesc->usr_desc[index] & 0x3FFFFFFULL) << 6);
3701
3702	#if GIET_DEBUG_FBF_CMA
3703	_printf("\n[FBF_CMA DEBUG] enters _sys_fbf_cma_check()\n"
3704	" - cma channel = %d\n"
3705	" - buffer index = %d\n"
3706	" - usr_desc value = %l\n"
3707	" - fbf_desc value = %l\n"
3708	" - usr status paddr = %l\n",
3709	channel,
3710	index,
3711	_fbf_ker_chbuf.usr_desc[index],
3712	_fbf_ker_chbuf.fbf_desc,
3713	usr_sts_paddr );
3714	#endif
3715
3716	// waiting user buffer released by the CMA component)
3717	unsigned int full;
3718	do
3719	{
3720	// INVAL L2 cache copy of user buffer status
3721	// because it is modified in RAM by the CMA component
3722	_mmc_inval( usr_sts_paddr , 4 );
3723
3724	full = _physical_read( usr_sts_paddr );
3725	}
3726	while ( full );
3727
3728	return SYSCALL_OK;
3729
3730	} // end _sys_fbf_cma_check()
3731
3732	//////////////////////////////////////////////
3733	int _sys_fbf_cma_display( unsigned int index )
3734	{
3735	// get calling thread scheduler, ltid and trdid
3736	static_scheduler_t* psched = _get_sched();
3737	unsigned int ltid = _get_thread_ltid();
3738	unsigned int trdid = _get_thread_trdid();
3739
3740	// check FBF allocated
3741	if ( (psched->context[ltid].slot[CTX_LOCKS_ID] & LOCKS_MASK_FBF) == 0 )
3742	{
3743	_printf("\n[GIET ERROR] in _sys_fbf_cma_display() : "
3744	"FBF not allocated to thread %x\n", trdid );
3745
3746	return SYSCALL_CHANNEL_NON_ALLOCATED;
3747	}
3748
3749	// get channel index
3750	unsigned int channel = _get_context_slot( CTX_CMA_FB_ID );
3751
3752	if ( channel >= NB_CMA_CHANNELS )
3753	{
3754	_printf("\n[GIET ERROR] in _sys_fbf_cma_display() : "
3755	"CMA channel non allocated to thread %x\n", trdid );
3756
3757	return SYSCALL_CHANNEL_NON_ALLOCATED;
3758	}
3759
3760	// check buffer index
3761	if ( index >= _fbf_ker_chbuf.nbufs )
3762	{
3763	_printf("\n[GIET ERROR] in _sys_fbf_cma_display() : "
3764	"buffer index too large for thread %x\n", trdid );
3765
3766	return SYSCALL_CHANNEL_NON_ALLOCATED;
3767	}
3768
3769	// compute user buffer and status physical addresses
3770	unsigned long long usr_sts_paddr;
3771	unsigned long long usr_buf_paddr;
3772
3773	fbf_chbuf_t* pdesc = &_fbf_ker_chbuf;
3774
3775	usr_sts_paddr = ((pdesc->usr_desc[index] & 0xFFF0000000000000ULL) >> 20) +
3776	((pdesc->usr_desc[index] & 0x3FFFFFFULL) << 6);
3777
3778	usr_buf_paddr = ((pdesc->usr_desc[index] & 0xFFFFFFFFFC000000ULL) >> 20);
3779
3780	#if GIET_DEBUG_FBF_CMA
3781	_printf("\n[FBF_CMA DEBUG] enters _sys_fbf_cma_display()\n"
3782	" - cma channel = %d\n"
3783	" - buffer index = %d\n"
3784	" - usr buffer paddr = %l\n"
3785	" - usr status paddr = %l\n",
3786	channel,
3787	index,
3788	usr_buf_paddr,
3789	usr_sts_paddr );
3790	#endif
3791
3792	// SYNC request, because this buffer will be read from XRAM by the CMA component
3793	_mmc_sync( usr_buf_paddr , FBUF_X_SIZE * FBUF_Y_SIZE );
3794
3795	// set user buffer status
3796	_physical_write( usr_sts_paddr, 0x1 );
3797
3798	// SYNC request, because this status will be read from XRAM by the CMA component
3799	_mmc_sync( usr_sts_paddr, 4 );
3800
3801	return SYSCALL_OK;
3802
3803	} // end _sys_fbf_cma_display()
3804
3805	///////////////////////
3806	int _sys_fbf_cma_stop()
3807	{
3808	// get channel index
3809	unsigned int channel = _get_context_slot( CTX_CMA_FB_ID );
3810
3811	if ( channel >= NB_CMA_CHANNELS )
3812	{
3813	_printf("\n[GIET ERROR] in _sys_fbf_cma_stop() : CMA channel non allocated\n");
3814
3815	return SYSCALL_CHANNEL_NON_ALLOCATED;
3816	}
3817
3818	// Desactivate CMA channel
3819	_cma_set_register( channel, CHBUF_RUN, MODE_IDLE );
3820
3821	return SYSCALL_OK;
3822
3823	} // end _sys_fbf_cma_stop()
3824
3825	#endif // if NB_CMA_CHANNELS
3826
3827
3828	//////////////////////////////////////////////////////////////////////////////
3829	// Miscelaneous syscall handlers
3830	//////////////////////////////////////////////////////////////////////////////
3831
3832	///////////////
3833	int _sys_ukn()
3834	{
3835	_printf("\n[GIET ERROR] Undefined System Call / EPC = %x\n", _get_epc() );
3836
3837	return SYSCALL_UNDEFINED_SYSTEM_CALL;
3838	}
3839
3840	////////////////////////////////////
3841	int _sys_proc_xyp( unsigned int* x,
3842	unsigned int* y,
3843	unsigned int* p )
3844	{
3845	unsigned int gpid = _get_procid(); // global processor index from CPO register
3846
3847	*x = (gpid >> (Y_WIDTH + P_WIDTH)) & ((1<<X_WIDTH)-1);
3848	*y = (gpid >> P_WIDTH) & ((1<<Y_WIDTH)-1);
3849	*p = gpid & ((1<<P_WIDTH)-1);
3850
3851	return SYSCALL_OK;
3852	}
3853
3854	////////////////////////////////////////////
3855	int _sys_procs_number( unsigned int* x_size,
3856	unsigned int* y_size,
3857	unsigned int* nprocs )
3858	{
3859	mapping_header_t * header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
3860	mapping_cluster_t * cluster = _get_cluster_base(header);
3861
3862	unsigned int x;
3863	unsigned int y;
3864	unsigned int okmin = 1;
3865	unsigned int okmax = 1;
3866
3867	// compute max values
3868	unsigned int xmax = header->x_size;
3869	unsigned int ymax = header->y_size;
3870	unsigned int procs = cluster[0].procs;
3871
3872	// check the (ymax-1) lower rows
3873	for ( y = 0 ; y < ymax-1 ; y++ )
3874	{
3875	for ( x = 0 ; x < xmax ; x++ )
3876	{
3877	if (cluster[x*ymax+y].procs != procs ) okmin = 0;
3878	}
3879	}
3880
3881	// check the upper row
3882	for ( x = 0 ; x < xmax ; x++ )
3883	{
3884	if (cluster[x*ymax+ymax-1].procs != procs ) okmax = 0;
3885	}
3886
3887	// return values
3888	if ( okmin && okmax )
3889	{
3890	*x_size = xmax;
3891	*y_size = ymax;
3892	*nprocs = procs;
3893	}
3894	else if ( okmin )
3895	{
3896	*x_size = xmax;
3897	*y_size = ymax-1;
3898	*nprocs = procs;
3899	}
3900	else
3901	{
3902	*x_size = 0;
3903	*y_size = 0;
3904	*nprocs = 0;
3905	}
3906	return SYSCALL_OK;
3907	}
3908
3909	///////////////////////////////////////////////////////
3910	int _sys_vseg_get_vbase( char* vspace_name,
3911	char* vseg_name,
3912	unsigned int* vbase )
3913	{
3914	mapping_header_t * header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
3915	mapping_vspace_t * vspace = _get_vspace_base(header);
3916	mapping_vseg_t * vseg = _get_vseg_base(header);
3917
3918	unsigned int vspace_id;
3919	unsigned int vseg_id;
3920
3921	// scan vspaces
3922	for (vspace_id = 0; vspace_id < header->vspaces; vspace_id++)
3923	{
3924	if (_strncmp( vspace[vspace_id].name, vspace_name, 31) == 0)
3925	{
3926	// scan vsegs
3927	for (vseg_id = vspace[vspace_id].vseg_offset;
3928	vseg_id < (vspace[vspace_id].vseg_offset + vspace[vspace_id].vsegs);
3929	vseg_id++)
3930	{
3931	if (_strncmp(vseg[vseg_id].name, vseg_name, 31) == 0)
3932	{
3933	*vbase = vseg[vseg_id].vbase;
3934	return SYSCALL_OK;
3935	}
3936	}
3937	}
3938	}
3939	return SYSCALL_VSEG_NOT_FOUND;
3940	}
3941
3942	/////////////////////////////////////////////////////////
3943	int _sys_vseg_get_length( char* vspace_name,
3944	char* vseg_name,
3945	unsigned int* length )
3946	{
3947	mapping_header_t * header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
3948	mapping_vspace_t * vspace = _get_vspace_base(header);
3949	mapping_vseg_t * vseg = _get_vseg_base(header);
3950
3951	unsigned int vspace_id;
3952	unsigned int vseg_id;
3953
3954	// scan vspaces
3955	for (vspace_id = 0; vspace_id < header->vspaces; vspace_id++)
3956	{
3957	if (_strncmp( vspace[vspace_id].name, vspace_name, 31) == 0)
3958	{
3959	// scan vsegs
3960	for (vseg_id = vspace[vspace_id].vseg_offset;
3961	vseg_id < (vspace[vspace_id].vseg_offset + vspace[vspace_id].vsegs);
3962	vseg_id++)
3963	{
3964	if (_strncmp(vseg[vseg_id].name, vseg_name, 31) == 0)
3965	{
3966	*length = vseg[vseg_id].length;
3967	return SYSCALL_OK;
3968	}
3969	}
3970	}
3971	}
3972	return SYSCALL_VSEG_NOT_FOUND;
3973	}
3974
3975	////////////////////////////////////////
3976	int _sys_xy_from_ptr( void* ptr,
3977	unsigned int* x,
3978	unsigned int* y )
3979	{
3980	unsigned int flags;
3981	unsigned long long paddr = _v2p_translate( (unsigned int)ptr , &flags );
3982
3983	*x = (paddr>>36) & 0xF;
3984	*y = (paddr>>32) & 0xF;
3985
3986	return SYSCALL_OK;
3987	}
3988
3989	/////////////////////////////////////////
3990	int _sys_heap_info( unsigned int* vaddr,
3991	unsigned int* length,
3992	unsigned int x,
3993	unsigned int y )
3994	{
3995	// checking parameters
3996	if ( (x >= X_SIZE) \|\| (y >= Y_SIZE) )
3997	{
3998	*vaddr = 0;
3999	*length = 0;
4000	_printf("\n[GIET ERROR] in _sys_heap_info() : "
4001	"illegal (%d,%d) coordinates\n", x , y );
4002	return SYSCALL_ILLEGAL_CLUSTER_COORDINATES;
4003	}
4004
4005	mapping_header_t * header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
4006	mapping_thread_t * thread = _get_thread_base(header);
4007	mapping_vseg_t * vseg = _get_vseg_base(header);
4008	mapping_vspace_t * vspace = _get_vspace_base(header);
4009
4010	unsigned int thread_id;
4011	unsigned int vspace_id;
4012	unsigned int vseg_id = 0xFFFFFFFF;
4013
4014	// get calling thread vspace index
4015	vspace_id = _get_context_slot(CTX_VSID_ID);
4016
4017	// scan all threads in vspace to find one in clyster[x,y]
4018	unsigned int min = vspace[vspace_id].thread_offset ;
4019	unsigned int max = min + vspace[vspace_id].threads ;
4020	for ( thread_id = min ; thread_id < max ; thread_id++ )
4021	{
4022	if ( thread[thread_id].clusterid == (x * Y_SIZE + y) )
4023	{
4024	vseg_id = thread[thread_id].heap_vseg_id;
4025	break;
4026	}
4027	}
4028
4029	// analysing the vseg_id
4030	if ( vseg_id != 0xFFFFFFFF )
4031	{
4032	*vaddr = vseg[vseg_id].vbase;
4033	*length = vseg[vseg_id].length;
4034	}
4035	else
4036	{
4037	*vaddr = 0;
4038	*length = 0;
4039	_printf("error in _sys_heap_info() : no heap in cluster (%d,%d)\n", x , y );
4040	}
4041	return SYSCALL_OK;
4042	} // end _sys_heap_info()
4043
4044
4045	// Local Variables:
4046	// tab-width: 4
4047	// c-basic-offset: 4
4048	// c-file-offsets:((innamespace . 0)(inline-open . 0))
4049	// indent-tabs-mode: nil
4050	// End:
4051	// vim: filetype=c:expandtab:shiftwidth=4:tabstop=4:softtabstop=4
4052

Note: See TracBrowser for help on using the repository browser.

Download in other formats: