Context Navigation

source: soft/giet_vm/giet_kernel/sys_handler.c @ 721

Last change on this file since 721 was 719, checked in by alain, 9 years ago
Cosmetic.
Property svn:executable set to ``*
File size: 118.8 KB

Line
1	///////////////////////////////////////////////////////////////////////////////////
2	// File : sys_handler.c
3	// Date : 01/04/2012
4	// Author : alain greiner and joel porquet
5	// Copyright (c) UPMC-LIP6
6	///////////////////////////////////////////////////////////////////////////////////
7
8	#include <sys_handler.h>
9	#include <tty_driver.h>
10	#include <tim_driver.h>
11	#include <nic_driver.h>
12	#include <mmc_driver.h>
13	#include <mwr_driver.h>
14	#include <cma_driver.h>
15	#include <ctx_handler.h>
16	#include <fat32.h>
17	#include <elf-types.h>
18	#include <utils.h>
19	#include <kernel_malloc.h>
20	#include <tty0.h>
21	#include <vmem.h>
22	#include <hard_config.h>
23	#include <giet_config.h>
24	#include <mapping_info.h>
25	#include <irq_handler.h>
26	#include <io.h>
27
28	#if !defined(X_SIZE)
29	# error: You must define X_SIZE in the hard_config.h file
30	#endif
31
32	#if !defined(Y_SIZE)
33	# error: You must define Y_SIZE in the hard_config.h file
34	#endif
35
36	#if !defined(NB_PROCS_MAX)
37	# error: You must define NB_PROCS_MAX in the hard_config.h file
38	#endif
39
40	#if !defined(SEG_BOOT_MAPPING_BASE)
41	# error: You must define SEG_BOOT_MAPPING_BASE in the hard_config.h file
42	#endif
43
44	#if !defined(NB_TTY_CHANNELS)
45	# error: You must define NB_TTY_CHANNELS in the hard_config.h file
46	#endif
47
48	#if (NB_TTY_CHANNELS < 1)
49	# error: NB_TTY_CHANNELS cannot be smaller than 1!
50	#endif
51
52	#if !defined(NB_TIM_CHANNELS)
53	# error: You must define NB_TIM_CHANNELS in the hard_config.h file
54	#endif
55
56	#if !defined(NB_NIC_CHANNELS)
57	# error: You must define NB_NIC_CHANNELS in the hard_config.h file
58	#endif
59
60	#if !defined(NB_CMA_CHANNELS)
61	# error: You must define NB_CMA_CHANNELS in the hard_config.h file
62	#endif
63
64	#if !defined(GIET_NO_HARD_CC)
65	# error: You must define GIET_NO_HARD_CC in the giet_config.h file
66	#endif
67
68	#if !defined ( GIET_NIC_MAC4 )
69	# error: You must define GIET_NIC_MAC4 in the giet_config.h file
70	#endif
71
72	#if !defined ( GIET_NIC_MAC2 )
73	# error: You must define GIET_NIC_MAC2 in the giet_config.h file
74	#endif
75
76	////////////////////////////////////////////////////////////////////////////
77	// Extern variables
78	////////////////////////////////////////////////////////////////////////////
79
80	// allocated in tty0.c file.
81	extern sqt_lock_t _tty0_sqt_lock;
82
83	// allocated in mwr_driver.c file.
84	extern simple_lock_t _coproc_lock[X_SIZE*Y_SIZE];
85	extern unsigned int _coproc_type[X_SIZE*Y_SIZE];
86	extern unsigned int _coproc_info[X_SIZE*Y_SIZE];
87	extern unsigned int _coproc_mode[X_SIZE*Y_SIZE];
88	extern unsigned int _coproc_error[X_SIZE*Y_SIZE];
89	extern unsigned int _coproc_trdid[X_SIZE*Y_SIZE];
90
91	// allocated in tty_driver.c file.
92	extern tty_fifo_t _tty_rx_fifo[NB_TTY_CHANNELS];
93
94	// allocated in kernel_init.c file
95	extern static_scheduler_t* _schedulers[X_SIZE][Y_SIZE][NB_PROCS_MAX];
96
97	// allocated in bdv_driver.c file
98	spin_lock_t _bdv_lock;
99
100	////////////////////////////////////////////////////////////////////////////////
101	// Allocator protecting exclusive access to FBF by a single application.
102	// - The number of users in a given application should be set by a single
103	// thread using an _atomic_test_and_set().
104	// - The allocator is atomically decremented by each user thread when
105	// the thread exit.
106	////////////////////////////////////////////////////////////////////////////////
107
108	__attribute__((section(".kdata")))
109	unsigned int _fbf_alloc = 0;
110
111	////////////////////////////////////////////////////////////////////////////////
112	// Channel allocators for multi-channels peripherals
113	// - The array _***_channel_allocator[channel] defines the number of user
114	// threads for a dynamically allocated channel of peripheral ***.
115	// - The array _***_channel_wti[channel] defines the WTI index and the
116	// processor coordinates for the processor receiving the channel WTI.
117	////////////////////////////////////////////////////////////////////////////////
118
119	#if NB_TTY_CHANNELS
120	__attribute__((section(".kdata")))
121	unsigned int _tty_channel_alloc[NB_TTY_CHANNELS] = {0};
122
123	__attribute__((section(".kdata")))
124	unsigned int _tty_channel_wti[NB_TTY_CHANNELS];
125	#endif
126
127	#if NB_TIM_CHANNELS
128	__attribute__((section(".kdata")))
129	unsigned int _tim_channel_alloc[NB_TIM_CHANNELS] = {0};
130
131	__attribute__((section(".kdata")))
132	unsigned int _tim_channel_wti[NB_TIM_CHANNELS];
133	#endif
134
135	#if NB_CMA_CHANNELS
136	__attribute__((section(".kdata")))
137	unsigned int _cma_channel_alloc[NB_CMA_CHANNELS] = {0};
138
139	__attribute__((section(".kdata")))
140	unsigned int _cma_channel_wti[NB_CMA_CHANNELS];
141	#endif
142
143	#if NB_NIC_CHANNELS
144	__attribute__((section(".kdata")))
145	unsigned int _nic_rx_channel_alloc[NB_NIC_CHANNELS] = {0};
146
147	__attribute__((section(".kdata")))
148	unsigned int _nic_rx_channel_wti[NB_NIC_CHANNELS];
149
150	__attribute__((section(".kdata")))
151	unsigned int _nic_tx_channel_alloc[NB_NIC_CHANNELS] = {0};
152
153	__attribute__((section(".kdata")))
154	unsigned int _nic_tx_channel_wti[NB_NIC_CHANNELS];
155	#endif
156
157	////////////////////////////////////////////////////////////////////////////
158	// NIC_RX and NIC_TX kernel chbuf arrays
159	////////////////////////////////////////////////////////////////////////////
160
161	__attribute__((section(".kdata")))
162	ker_chbuf_t _nic_ker_rx_chbuf[NB_NIC_CHANNELS] __attribute__((aligned(64)));
163
164	__attribute__((section(".kdata")))
165	ker_chbuf_t _nic_ker_tx_chbuf[NB_NIC_CHANNELS] __attribute__((aligned(64)));
166
167	////////////////////////////////////////////////////////////////////////////
168	// FBF related chbuf descriptors array, indexed by the CMA channel index.
169	// Physical addresses of these chbuf descriptors required for L2 cache sync.
170	// FBF status
171	////////////////////////////////////////////////////////////////////////////
172
173	__attribute__((section(".kdata")))
174	fbf_chbuf_t _fbf_chbuf[NB_CMA_CHANNELS] __attribute__((aligned(64)));
175
176	__attribute__((section(".kdata")))
177	unsigned long long _fbf_chbuf_paddr[NB_CMA_CHANNELS];
178
179	__attribute__((section(".kdata")))
180	buffer_status_t _fbf_status[NB_CMA_CHANNELS] __attribute__((aligned(64)));
181
182	////////////////////////////////////////////////////////////////////////////
183	// Initialize the syscall vector with syscall handlers
184	// Note: This array must be synchronised with the define in file stdio.h
185	////////////////////////////////////////////////////////////////////////////
186
187	__attribute__((section(".kdata")))
188	const void * _syscall_vector[64] =
189	{
190	&_sys_proc_xyp, /* 0x00 */
191	&_get_proctime, /* 0x01 */
192	&_sys_procs_number, /* 0x02 */
193	&_sys_xy_from_ptr, /* 0x03 */
194	&_sys_ukn, /* 0x04 */
195	&_sys_vseg_get_vbase, /* 0x05 */
196	&_sys_vseg_get_length, /* 0x06 */
197	&_sys_heap_info, /* 0x07 */
198	&_sys_fbf_size, /* 0x08 */
199	&_sys_fbf_alloc, /* 0x09 */
200	&_sys_fbf_cma_alloc, /* 0x0A */
201	&_sys_fbf_cma_init_buf, /* 0x0B */
202	&_sys_fbf_cma_start, /* 0x0C */
203	&_sys_fbf_cma_display, /* 0x0D */
204	&_sys_fbf_cma_stop, /* 0x0E */
205	&_sys_ukn, /* 0x0F */
206
207	&_sys_applications_status, /* 0x10 */
208	&_sys_fbf_sync_write, /* 0x11 */
209	&_sys_fbf_sync_read, /* 0x12 */
210	&_sys_ukn, /* 0x13 */
211	&_sys_tim_alloc, /* 0x14 */
212	&_sys_tim_start, /* 0x15 */
213	&_sys_tim_stop, /* 0x16 */
214	&_sys_kill_application, /* 0x17 */
215	&_sys_exec_application, /* 0x18 */
216	&_sys_ukn, /* 0x19 */
217	&_sys_pthread_control, /* 0x1A */
218	&_sys_pthread_yield, /* 0x1B */
219	&_sys_pthread_kill, /* 0x1C */
220	&_sys_pthread_create, /* 0x1D */
221	&_sys_pthread_join, /* 0x1E */
222	&_sys_pthread_exit, /* 0x1F */
223
224	&_fat_open, /* 0x20 */
225	&_fat_read, /* 0x21 */
226	&_fat_write, /* 0x22 */
227	&_fat_lseek, /* 0x23 */
228	&_fat_file_info, /* 0x24 */
229	&_fat_close, /* 0x25 */
230	&_fat_remove, /* 0x26 */
231	&_fat_rename, /* 0x27 */
232	&_fat_mkdir, /* 0x28 */
233	&_fat_opendir, /* 0x29 */
234	&_fat_closedir, /* 0x2A */
235	&_fat_readdir, /* 0x2B */
236	&_sys_ukn, /* 0x2C */
237	&_sys_ukn, /* 0x2D */
238	&_sys_ukn, /* 0x2E */
239	&_sys_ukn, /* 0x2F */
240
241	&_sys_nic_alloc, /* 0x30 */
242	&_sys_nic_start, /* 0x31 */
243	&_sys_nic_move, /* 0x32 */
244	&_sys_nic_stop, /* 0x33 */
245	&_sys_nic_stats, /* 0x34 */
246	&_sys_nic_clear, /* 0x35 */
247	&_sys_tty_write, /* 0x36 */
248	&_sys_tty_read, /* 0x37 */
249	&_sys_tty_alloc, /* 0x38 */
250	&_sys_ukn, /* 0x39 */
251	&_sys_ukn, /* 0x3A */
252	&_sys_coproc_completed, /* 0x3B */
253	&_sys_coproc_alloc, /* 0x3C */
254	&_sys_coproc_channel_init, /* 0x3D */
255	&_sys_coproc_run, /* 0x3E */
256	&_sys_coproc_release, /* 0x3F */
257	};
258
259
260	//////////////////////////////////////////////////////////////////////////////
261	// Applications related syscall handlers
262	//////////////////////////////////////////////////////////////////////////////
263
264	////////////////////////////////////////////////////////////////////////
265	// This function is called by the _sys_exec_application function
266	// to reload all data segments contained in an application.elf file.
267	// File checking is minimal, because these segments have already
268	// been loaded by the boot code.
269	////////////////////////////////////////////////////////////////////////
270	static unsigned int _load_writable_segments( mapping_vspace_t* vspace )
271	{
272
273	#if GIET_DEBUG_EXEC
274	unsigned int gpid = _get_procid();
275	unsigned int cluster_xy = gpid >> P_WIDTH;
276	unsigned int p = gpid & ((1<<P_WIDTH)-1);
277	unsigned int x = cluster_xy >> Y_WIDTH;
278	unsigned int y = cluster_xy & ((1<<Y_WIDTH)-1);
279	if ( _get_proctime() > GIET_DEBUG_EXEC )
280	_printf("\n[DEBUG EXEC] _load_writable_segments() at cycle %d\n"
281	"P[%d,%d,%d] enters for %s\n",
282	_get_proctime() , x , y , p , vspace->name );
283	#endif
284
285	mapping_header_t* header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
286	mapping_vseg_t* vseg = _get_vseg_base(header);
287
288	unsigned int vseg_id; // vseg index in mapping
289	char buf[4096]; // buffer to store one cluster
290	unsigned int fd = 0; // file descriptor
291	unsigned int found = 0;
292
293	// first scan on vsegs in vspace to find the .elf pathname
294	for (vseg_id = vspace->vseg_offset;
295	vseg_id < (vspace->vseg_offset + vspace->vsegs);
296	vseg_id++)
297	{
298	if( vseg[vseg_id].type == VSEG_TYPE_ELF )
299	{
300	// open the .elf file associated to vspace
301	fd = _fat_open( vseg[vseg_id].binpath , O_RDONLY );
302	if ( fd < 0 ) return 1;
303
304	#if GIET_DEBUG_EXEC
305	if ( _get_proctime() > GIET_DEBUG_EXEC )
306	_printf("\n[DEBUG EXEC] _load_writable_segments() at cycle %d\n"
307	"P[%d,%d,%d] open %s / fd = %d\n",
308	_get_proctime() , x , y , p , vseg[vseg_id].binpath , fd );
309	#endif
310	found = 1;
311	break;
312
313	}
314	}
315
316	// check .elf file found
317	if ( found == 0 )
318	{
319
320	_printf("@@@ _load_writable_segments() : .elf not found\n");
321
322	return 1;
323	}
324
325	// load Elf-Header into buffer from .elf file
326	if ( _fat_lseek( fd, 0, SEEK_SET ) < 0 )
327	{
328
329	_printf("@@@ _load_writable_segments() : cannot seek\n");
330
331	_fat_close( fd );
332	return 1;
333
334	}
335	if ( _fat_read( fd, (unsigned int)buf, 4096, 0 ) < 0 )
336	{
337
338	_printf("@@@ _load_writable_segments() : cannot read\n");
339
340	_fat_close( fd );
341	return 1;
342	}
343
344	#if GIET_DEBUG_EXEC
345	if ( _get_proctime() > GIET_DEBUG_EXEC )
346	_printf("\n[DEBUG EXEC] _load_writable_segments() at cycle %d\n"
347	"P[%d,%d,%d] loaded Elf-Header\n",
348	_get_proctime() , x , y , p );
349	#endif
350
351	// get nsegments and Program-Header-Table offset from Elf-Header
352	Elf32_Ehdr* elf_header_ptr = (Elf32_Ehdr*)buf;
353	unsigned int offset = elf_header_ptr->e_phoff;
354	unsigned int nsegments = elf_header_ptr->e_phnum;
355
356	// load Program-Header-Table from .elf file
357	if ( _fat_lseek( fd, offset, SEEK_SET ) < 0 )
358	{
359	_fat_close( fd );
360	return 1;
361	}
362	if ( _fat_read( fd, (unsigned int)buf, 4096, 0 ) < 0 )
363	{
364	_fat_close( fd );
365	return 1;
366	}
367
368	#if GIET_DEBUG_EXEC
369	if ( _get_proctime() > GIET_DEBUG_EXEC )
370	_printf("\n[DEBUG EXEC] _load_writable_segments() at cycle %d\n"
371	"P[%d,%d,%d] loaded Program-Header-Table\n",
372	_get_proctime() , x , y , p );
373	#endif
374
375	// set Program-Header-Table pointer
376	Elf32_Phdr* elf_pht_ptr = (Elf32_Phdr*)buf;
377
378	// second scan on vsegs in vspace to load the seg_data segments :
379	// - type == VSEG_TYPE_ELF
380	// - non eXecutable
381	for (vseg_id = vspace->vseg_offset;
382	vseg_id < (vspace->vseg_offset + vspace->vsegs);
383	vseg_id++)
384	{
385	if( (vseg[vseg_id].type == VSEG_TYPE_ELF) && // type ELF
386	((vseg[vseg_id].mode & 0x4) == 0) ) // non executable
387	{
388	// get vbase and pbase
389	paddr_t pbase = vseg[vseg_id].pbase;
390	unsigned int vbase = vseg[vseg_id].vbase;
391
392	// scan segments in Progam-Header-Table to find match
393	// No match checking as the segment was previously found
394	unsigned int seg;
395	for (seg = 0 ; seg < nsegments ; seg++)
396	{
397	if ( (elf_pht_ptr[seg].p_type == PT_LOAD) && // loadable
398	(elf_pht_ptr[seg].p_flags & PF_W) && // writable
399	(elf_pht_ptr[seg].p_vaddr == vbase) ) // matching
400	{
401	// Get segment offset and size in .elf file
402	unsigned int seg_offset = elf_pht_ptr[seg].p_offset;
403	unsigned int seg_size = elf_pht_ptr[seg].p_filesz;
404
405	// compute destination address and extension for _fat_read()
406	unsigned int dest = (unsigned int)pbase;
407	unsigned int extend = (unsigned int)(pbase>>32) \| 0xFFFF0000;
408
409	// load the segment
410	if ( _fat_lseek( fd, seg_offset, SEEK_SET ) < 0 )
411	{
412	_fat_close( fd );
413	return 1;
414	}
415	if ( _fat_read( fd, dest, seg_size, extend ) < 0 )
416	{
417	_fat_close( fd );
418	return 1;
419	}
420	}
421	}
422
423	#if GIET_DEBUG_EXEC
424	if ( _get_proctime() > GIET_DEBUG_EXEC )
425	_printf("\n[DEBUG EXEC] _load_writable_segments() at cycle %d\n"
426	"P[%d,%d,%d] loaded segment %x\n",
427	_get_proctime() , x , y , p , vbase );
428	#endif
429	}
430	} // end loop on writable & loadable segments
431
432	// close .elf file
433	_fat_close( fd );
434
435	return 0;
436	} // end load_writable_segments()
437
438
439
440	///////////////////////////////////////
441	int _sys_exec_application( char* name )
442	{
443	mapping_header_t * header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
444	mapping_vspace_t * vspace = _get_vspace_base(header);
445	mapping_thread_t * thread = _get_thread_base(header);
446	mapping_vseg_t * vseg = _get_vseg_base(header);
447
448	unsigned int vspace_id;
449	unsigned int thread_id;
450
451	#if GIET_DEBUG_EXEC
452	unsigned int gpid = _get_procid();
453	unsigned int cluster_xy = gpid >> P_WIDTH;
454	unsigned int p = gpid & ((1<<P_WIDTH)-1);
455	unsigned int x = cluster_xy >> Y_WIDTH;
456	unsigned int y = cluster_xy & ((1<<Y_WIDTH)-1);
457	if ( _get_proctime() > GIET_DEBUG_EXEC )
458	_printf("\n[DEBUG EXEC] _sys_exec_application() at cycle %d\n"
459	"P[%d,%d,%d] enters for vspace %s\n",
460	_get_proctime() , x, y, p, name );
461	#endif
462
463	unsigned int y_size = header->y_size;
464
465	// scan vspaces to find matching vspace name
466	for (vspace_id = 0 ; vspace_id < header->vspaces ; vspace_id++)
467	{
468	if ( _strcmp( vspace[vspace_id].name, name ) == 0 ) // vspace found
469	{
470
471	#if GIET_DEBUG_EXEC
472	if ( _get_proctime() > GIET_DEBUG_EXEC )
473	_printf("\n[DEBUG EXEC] _sys_exec_application() at cycle %d\n"
474	"P[%d,%d,%d] found vspace %s\n",
475	_get_proctime() , x, y, p, name );
476	#endif
477	// reload writable segments
478	if ( _load_writable_segments( &vspace[vspace_id] ) )
479	{
480	_printf("[GIET ERROR] _sys_exec_application() : "
481	"can't load data segment for vspace %s\n", name );
482	return SYSCALL_CANNOT_LOAD_DATA_SEGMENT;
483	}
484
485	#if GIET_DEBUG_EXEC
486	if ( _get_proctime() > GIET_DEBUG_EXEC )
487	_printf("\n[DEBUG EXEC] _sys_exec_application() at cycle %d\n"
488	"P[%d,%d,%d] loaded all writable segments for vspace %s\n",
489	_get_proctime() , x, y, p, name );
490	#endif
491	// scan threads in vspace with three goals :
492	// - check all threads desactivated
493	// - re-initialise all threads contexts
494	// - find main thread
495	unsigned int main_found = 0;
496	unsigned int main_ltid = 0;
497	static_scheduler_t* main_psched = NULL;
498	unsigned int min = vspace[vspace_id].thread_offset;
499	unsigned int max = min + vspace[vspace_id].threads;
500	for ( thread_id = min ; thread_id < max ; thread_id++ )
501	{
502	// get thread identifiers : [x,y,p,ltid]
503	unsigned int cid = thread[thread_id].clusterid;
504	unsigned int x = cid / y_size;
505	unsigned int y = cid % y_size;
506	unsigned int p = thread[thread_id].proclocid;
507	unsigned int ltid = thread[thread_id].ltid;
508	unsigned int vsid = thread[thread_id].stack_vseg_id;
509
510	// get scheduler pointer
511	static_scheduler_t* psched = _schedulers[x][y][p];
512
513	// check thread non active
514	if ( psched->context[ltid].slot[CTX_NORUN_ID] == 0 ) // runnable !!!
515	{
516	_printf("\n[GIET ERROR] in _sys_exec_application() : "
517	"thread %s already active in vspace %s\n",
518	thread[thread_id].name, name );
519	return SYSCALL_THREAD_ALREADY_ACTIVE;
520	}
521
522	// initialise thread context
523	unsigned int ctx_epc = psched->context[ltid].slot[CTX_ENTRY_ID];
524	unsigned int ctx_sp = vseg[vsid].vbase + vseg[vsid].length;
525	unsigned int ctx_ra = (unsigned int)&_ctx_eret;
526	unsigned int ctx_sr = GIET_SR_INIT_VALUE;
527
528	psched->context[ltid].slot[CTX_EPC_ID] = ctx_epc;
529	psched->context[ltid].slot[CTX_RA_ID] = ctx_ra;
530	psched->context[ltid].slot[CTX_SR_ID] = ctx_sr;
531	psched->context[ltid].slot[CTX_SP_ID] = ctx_sp;
532
533	// register information required to activate main thread
534	// actual activation done when threads initialisation is completed
535	if ( thread[thread_id].is_main )
536	{
537	main_psched = psched;
538	main_ltid = ltid;
539	main_found = 1;
540	}
541
542	#if GIET_DEBUG_EXEC
543	if ( _get_proctime() > GIET_DEBUG_EXEC )
544	_printf("\n[DEBUG EXEC] _sys_exec_application() at cycle %d\n"
545	"P[%d,%d,%d] initialise thread %s in vspace %s\n",
546	_get_proctime() , x, y, p, thread[thread_id].name , name );
547	#endif
548	} // end loop on threads
549
550	// activate main thread
551	if ( main_found )
552	{
553	main_psched->context[main_ltid].slot[CTX_NORUN_ID] = 0;
554	}
555	else
556	{
557	_printf("\n[GIET ERROR] in _sys_exec_application() : "
558	"main not found in vspace %s\n", name );
559	return SYSCALL_MAIN_NOT_FOUND;
560	}
561
562	_printf("\n[GIET WARNING] application %s launched : %d threads\n",
563	name , max-min );
564
565	return SYSCALL_OK;
566	}
567	} // end of loop on vspaces
568
569	// vspace not found
570	_printf("\n[GIET ERROR] in _sys_exec_application() : "
571	"vspace %s not found\n", name );
572	return SYSCALL_VSPACE_NOT_FOUND;
573
574	} // end _sys_exec_application()
575
576
577	///////////////////////////////////////
578	int _sys_kill_application( char* name )
579	{
580	mapping_header_t * header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
581	mapping_vspace_t * vspace = _get_vspace_base(header);
582	mapping_thread_t * thread = _get_thread_base(header);
583
584	unsigned int vspace_id;
585	unsigned int thread_id;
586
587	#if GIET_DEBUG_EXEC
588	unsigned int gpid = _get_procid();
589	unsigned int cluster_xy = gpid >> P_WIDTH;
590	unsigned int p = gpid & ((1<<P_WIDTH)-1);
591	unsigned int x = cluster_xy >> Y_WIDTH;
592	unsigned int y = cluster_xy & ((1<<Y_WIDTH)-1);
593	if ( _get_proctime() > GIET_DEBUG_EXEC )
594	_printf("\n[DEBUG EXEC] _sys_kill_application() at cycle %d\n"
595	"P[%d,%d,%d] enters for vspace %s\n",
596	_get_proctime() , x , y , p , name );
597	#endif
598
599	// shell cannot be killed
600	if ( _strcmp( name , "shell" ) == 0 )
601	{
602	_printf("\n[GIET ERROR] in _sys_kill_application() : "
603	"%s application cannot be killed\n", name );
604	return SYSCALL_APPLI_CANNOT_BE_KILLED;
605	}
606
607	// scan vspaces to find matching vspace name
608	for (vspace_id = 0; vspace_id < header->vspaces; vspace_id++)
609	{
610	if ( _strcmp( vspace[vspace_id].name, name ) == 0 )
611	{
612	// scan threads to send KILL signal to all threads in vspace
613	unsigned int y_size = header->y_size;
614	unsigned int min = vspace[vspace_id].thread_offset;
615	unsigned int max = min + vspace[vspace_id].threads;
616	for ( thread_id = min ; thread_id < max ; thread_id++ )
617	{
618	unsigned int cid = thread[thread_id].clusterid;
619	unsigned int x = cid / y_size;
620	unsigned int y = cid % y_size;
621	unsigned int p = thread[thread_id].proclocid;
622	unsigned int ltid = thread[thread_id].ltid;
623
624	// get scheduler pointer for processor running the thread
625	static_scheduler_t* psched = (static_scheduler_t*)_schedulers[x][y][p];
626
627	// set KILL signal bit
628	_atomic_or( &psched->context[ltid].slot[CTX_SIGS_ID] , SIGS_MASK_KILL );
629	}
630
631	_printf("\n[GIET WARNING] application %s killed / %d threads\n",
632	name , max-min );
633
634	return SYSCALL_OK;
635	}
636	} // en loop on vspaces
637
638	_printf("\n[GIET ERROR] in _sys_kill_application() : "
639	"application %s not found\n", name );
640	return SYSCALL_VSPACE_NOT_FOUND;
641
642	} // end _sys_kill_application()
643
644
645
646	//////////////////////////////////////////
647	int _sys_applications_status( char* name )
648	{
649	mapping_header_t * header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
650	mapping_thread_t * thread = _get_thread_base(header);
651	mapping_vspace_t * vspace = _get_vspace_base(header);
652	mapping_cluster_t * cluster = _get_cluster_base(header);
653
654	unsigned int thread_id; // thread index in mapping
655	unsigned int vspace_id; // vspace index in mapping
656
657	// scan vspaces
658	for( vspace_id = 0 ; vspace_id < header->vspaces ; vspace_id++ )
659	{
660	if ( (name == NULL) \|\| (_strcmp(vspace[vspace_id].name , name ) == 0) )
661	{
662	_user_printf("\n*** vspace %s\n", vspace[vspace_id].name );
663
664	// scan all threads in vspace
665	unsigned int min = vspace[vspace_id].thread_offset ;
666	unsigned int max = min + vspace[vspace_id].threads ;
667	for ( thread_id = min ; thread_id < max ; thread_id++ )
668	{
669	unsigned int clusterid = thread[thread_id].clusterid;
670	unsigned int p = thread[thread_id].proclocid;
671	unsigned int x = cluster[clusterid].x;
672	unsigned int y = cluster[clusterid].y;
673	unsigned int ltid = thread[thread_id].ltid;
674	static_scheduler_t* psched = (static_scheduler_t*)_schedulers[x][y][p];
675	unsigned int norun = psched->context[ltid].slot[CTX_NORUN_ID];
676	unsigned int tty = psched->context[ltid].slot[CTX_TTY_ID];
677	unsigned int current = psched->current;
678
679	if ( current == ltid )
680	_user_printf(" - thread %s / P[%d,%d,%d] / ltid = %d / "
681	"TTY = %d / norun = %x : running\n",
682	thread[thread_id].name, x, y, p, ltid, tty, norun );
683	else if ( norun == 0 )
684	_user_printf(" - thread %s / P[%d,%d,%d] / ltid = %d / "
685	"TTY = %d / norun = %x : runable\n",
686	thread[thread_id].name, x, y, p, ltid, tty, norun);
687	else
688	_user_printf(" - thread %s / P[%d,%d,%d] / ltid = %d / "
689	"TTY = %d / norun = %x : blocked\n",
690	thread[thread_id].name, x, y, p, ltid, tty, norun);
691	}
692	}
693	}
694	_user_printf("\n");
695
696	return SYSCALL_OK;
697	} // end _sys_applications_status()
698
699
700
701	/////////////////////////////////////////////////////////////////////////////
702	// Threads related syscall handlers
703	/////////////////////////////////////////////////////////////////////////////
704
705	////////////////////////////////////////////////
706	int _sys_pthread_create( unsigned int* buffer,
707	void* attr,
708	void* function,
709	void* arg )
710	{
711	// attr argument not supported
712	if ( attr != NULL )
713	{
714	_printf("\n[GIET ERROR] in _sys_pthread_create() : "
715	"attr argument not supported\n" );
716
717	return SYSCALL_PTHREAD_ARGUMENT_NOT_SUPPORTED;
718	}
719
720	// get pointers in mapping
721	mapping_header_t* header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
722	mapping_thread_t* thread = _get_thread_base(header);
723	mapping_vspace_t* vspace = _get_vspace_base(header);
724	mapping_cluster_t* cluster = _get_cluster_base(header);
725
726	// get scheduler for processor running the calling thread
727	static_scheduler_t* psched = (static_scheduler_t*)_get_sched();
728
729	// get calling thread local index in scheduler
730	unsigned int current = psched->current;
731
732	// get vspace index
733	unsigned int vspace_id = psched->context[current].slot[CTX_VSID_ID];
734
735	#if GIET_DEBUG_EXEC
736	unsigned int gpid = _get_procid();
737	unsigned int cluster_xy = gpid >> P_WIDTH;
738	unsigned int p = gpid & ((1<<P_WIDTH)-1);
739	unsigned int x = cluster_xy >> Y_WIDTH;
740	unsigned int y = cluster_xy & ((1<<Y_WIDTH)-1);
741	if ( _get_proctime() > GIET_DEBUG_EXEC )
742	_printf("\n[DEBUG EXEC] _sys_pthread_create() at cycle %d\n"
743	"P[%d,%d,%d] enters for vspace %s / entry = %x\n",
744	_get_proctime() , x , y , p , vspace[vspace_id].name , (unsigned int)function );
745	#endif
746
747	unsigned int thread_id; // searched thread : local index in mapping
748	unsigned int clusterid; // searched thread : cluster index
749	unsigned int lpid; // searched thread : processor local index
750	unsigned int ltid; // searched thread : scheduler thread index
751	unsigned int cx; // searched thread : X coordinate for searched thread
752	unsigned int cy; // searched thread : Y coordinate for searched thread
753	unsigned int entry; // searched thread : entry point
754	unsigned int norun; // searched thread : norun vector
755	unsigned int trdid; // searched thread : thread identifier
756
757	// scan threads in vspace to find an inactive thread matching function
758	unsigned int min = vspace[vspace_id].thread_offset;
759	unsigned int max = min + vspace[vspace_id].threads;
760	unsigned int found = 0;
761	for ( thread_id = min ; (thread_id < max) && (found == 0) ; thread_id++ )
762	{
763	// get thread coordinates [cx,cy,lpid] and ltid from mapping
764	ltid = thread[thread_id].ltid;
765	clusterid = thread[thread_id].clusterid;
766	lpid = thread[thread_id].proclocid;
767	cx = cluster[clusterid].x;
768	cy = cluster[clusterid].y;
769
770	// get thread scheduler pointer
771	psched = _schedulers[cx][cy][lpid];
772
773	// get thread entry-point, norun-vector, and trdid from context
774	entry = psched->context[ltid].slot[CTX_ENTRY_ID];
775	norun = psched->context[ltid].slot[CTX_NORUN_ID];
776	trdid = psched->context[ltid].slot[CTX_TRDID_ID];
777
778	// check matching
779	if ( ((unsigned int)function == entry ) &&
780	(norun & NORUN_MASK_THREAD) ) found = 1;
781
782	} // end loop on threads
783
784	if ( found ) // one matching inactive thread has been found
785	{
786	// set argument value in thread context
787	if ( arg != NULL ) psched->context[ltid].slot[CTX_A0_ID] = (unsigned int)arg;
788
789	// activate thread
790	psched->context[ltid].slot[CTX_NORUN_ID] = 0;
791
792	// return launched thead global identifier
793	*buffer = trdid;
794
795	#if GIET_DEBUG_EXEC
796	if ( _get_proctime() > GIET_DEBUG_EXEC )
797	_printf("\n[DEBUG EXEC] _sys_pthread_create() at cycle %d\n"
798	"P[%d,%d,%d] exit : thread %x launched in vspace %s\n",
799	_get_proctime() , x , y , p , trdid , vspace[vspace_id].name );
800	#endif
801	return SYSCALL_OK;
802	}
803	else // no matching thread found
804	{
805	_printf("\n[GIET ERROR] in _sys_pthread_create() : "
806	"no matching thread for entry = %x in vspace %s\n",
807	(unsigned int)function , vspace[vspace_id].name );
808
809	return SYSCALL_THREAD_NOT_FOUND;
810	}
811
812	} // end _sys_pthread_create()
813
814
815	///////////////////////////////////////////
816	int _sys_pthread_join( unsigned int trdid,
817	void* ptr )
818	{
819	// ptr argument not supported
820	if ( ptr != NULL )
821	{
822	_printf("\n[GIET ERROR] in _sys_pthread_join() : "
823	"ptr argument not supported, must be NULL\n" );
824
825	return SYSCALL_PTHREAD_ARGUMENT_NOT_SUPPORTED;
826	}
827
828	// get calling thread vspace
829	unsigned int caller_vspace = _get_context_slot( CTX_VSID_ID );
830
831	#if GIET_DEBUG_EXEC
832	unsigned int gpid = _get_procid();
833	unsigned int cluster_xy = gpid >> P_WIDTH;
834	unsigned int p = gpid & ((1<<P_WIDTH)-1);
835	unsigned int x = cluster_xy >> Y_WIDTH;
836	unsigned int y = cluster_xy & ((1<<Y_WIDTH)-1);
837	if ( _get_proctime() > GIET_DEBUG_EXEC )
838	_printf("\n[DEBUG EXEC] _sys_pthread_join() at cycle %d\n"
839	"P[%d,%d,%d] enters for thread %x in vspace %d\n",
840	_get_proctime() , x , y , p , trdid , caller_vspace );
841	#endif
842
843	// get target thread indexes from trdid
844	unsigned int cx = (trdid>>24) & 0xFF;
845	unsigned int cy = (trdid>>16) & 0xFF;
846	unsigned int lpid = (trdid>>8 ) & 0xFF;
847	unsigned int ltid = (trdid ) & 0xFF;
848
849	// get target thread scheduler, vspace and registered trdid
850	static_scheduler_t* psched = _schedulers[cx][cy][lpid];
851	unsigned int target_vspace = psched->context[ltid].slot[CTX_VSID_ID];
852	unsigned int registered_trdid = psched->context[ltid].slot[CTX_TRDID_ID];
853
854	// check trdid
855	if ( trdid != registered_trdid )
856	{
857	_printf("\nerror in _sys_pthread_join() : "
858	"trdid = %x / registered_trdid = %x\n",
859	trdid , registered_trdid );
860
861	return SYSCALL_UNCOHERENT_THREAD_CONTEXT;
862	}
863
864	// check calling thread and target thread in same vspace
865	if ( caller_vspace != target_vspace )
866	{
867	_printf("\n[GIET ERROR] in _sys_pthread_join() : "
868	" calling thread and target thread not in same vspace\n");
869
870	return SYSCALL_NOT_IN_SAME_VSPACE;
871	}
872
873	// get target thread state
874	unsigned int* pnorun = &psched->context[ltid].slot[CTX_NORUN_ID];
875
876	asm volatile ( "2000: \n"
877	"move $11, %0 \n" /* $11 <= pnorun */
878	"lw $11, 0($11) \n" /* $11 <= norun */
879	"andi $11, $11, 1 \n" /* $11 <= norun & 0x1 */
880	"beqz $11, 2000b \n"
881	:
882	: "r" (pnorun)
883	: "$11" );
884
885	#if GIET_DEBUG_EXEC
886	if ( _get_proctime() > GIET_DEBUG_EXEC )
887	_printf("\n[DEBUG EXEC] _sys_pthread_join() at cycle %d\n"
888	"P[%d,%d,%d] exit for thread %x in vspace %d\n",
889	_get_proctime() , x , y , p , trdid , caller_vspace );
890	#endif
891
892	return SYSCALL_OK;
893
894	} // end _sys_pthread_join()
895
896
897	////////////////////////////////////////
898	int _sys_pthread_kill( pthread_t trdid,
899	int signal )
900	{
901	// get calling thread vspace
902	unsigned int caller_vspace = _get_context_slot( CTX_VSID_ID );
903
904	#if GIET_DEBUG_EXEC
905	unsigned int gpid = _get_procid();
906	unsigned int cluster_xy = gpid >> P_WIDTH;
907	unsigned int p = gpid & ((1<<P_WIDTH)-1);
908	unsigned int x = cluster_xy >> Y_WIDTH;
909	unsigned int y = cluster_xy & ((1<<Y_WIDTH)-1);
910	if ( _get_proctime() > GIET_DEBUG_EXEC )
911	_printf("\n[DEBUG EXEC] _sys_pthread_kill() at cycle %d\n"
912	"P[%d,%d,%d] enters for thread %x in vspace %d\n",
913	_get_proctime() , x , y , p , trdid , caller_vspace );
914	#endif
915
916
917	// get and check target thread indexes from trdid
918	unsigned int cx = (trdid>>24) & 0xFF;
919	unsigned int cy = (trdid>>16) & 0xFF;
920	unsigned int lpid = (trdid>>8 ) & 0xFF;
921	unsigned int ltid = (trdid ) & 0xFF;
922
923	// get target thread scheduler, vspace and registered trdid
924	static_scheduler_t* psched = _schedulers[cx][cy][lpid];
925	unsigned int target_vspace = psched->context[ltid].slot[CTX_VSID_ID];
926	unsigned int registered_trdid = psched->context[ltid].slot[CTX_TRDID_ID];
927
928	// check trdid
929	if ( trdid != registered_trdid )
930	{
931	_printf("\n[GIET ERROR] in _sys_pthread_kill() : trdid = %x"
932	" / registered_trdid = %x\n", trdid , registered_trdid );
933	return SYSCALL_UNCOHERENT_THREAD_CONTEXT;
934	}
935
936	// check calling thread and target thread in same vspace
937	if ( caller_vspace != target_vspace )
938	{
939	_printf("\n[GIET ERROR] in _sys_pthread_kill() : not in same vspace\n");
940	return SYSCALL_NOT_IN_SAME_VSPACE;
941	}
942
943	// register KILL signal in target thread context if required
944	if ( signal )
945	{
946	_atomic_or( &psched->context[ltid].slot[CTX_SIGS_ID] , SIGS_MASK_KILL );
947	}
948
949	#if GIET_DEBUG_EXEC
950	if ( _get_proctime() > GIET_DEBUG_EXEC )
951	_printf("\n[DEBUG EXEC] _sys_pthread_kill() at cycle %d\n"
952	"P[%d,%d,%d] exit for thread %x in vspace %d\n",
953	_get_proctime() , x , y , p , trdid , caller_vspace );
954	#endif
955
956	return SYSCALL_OK;
957
958	} // end _sys_pthread_kill()
959
960
961	/////////////////////////////////////
962	int _sys_pthread_exit( void* string )
963	{
964	mapping_header_t * header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
965	mapping_vspace_t * vspace = _get_vspace_base(header);
966
967	unsigned int ltid = _get_context_slot(CTX_LTID_ID);
968	unsigned int trdid = _get_context_slot(CTX_TRDID_ID);
969	unsigned int vsid = _get_context_slot(CTX_VSID_ID);
970
971	// print exit message
972	if ( string == NULL )
973	{
974	_printf("\n[GIET WARNING] Exit thread %x in application %s\n",
975	trdid , vspace[vsid].name );
976	}
977	else
978	{
979	_printf("\n[GIET WARNING] Exit thread %x in vspace %s\n"
980	" Cause : %s\n\n",
981	trdid , vspace[vsid].name , (char*) string );
982	}
983
984	// get scheduler pointer for calling thread
985	static_scheduler_t* psched = (static_scheduler_t*)_get_sched();
986
987	// register KILL signal in calling thread context (suicid request)
988	_atomic_or( &psched->context[ltid].slot[CTX_SIGS_ID] , SIGS_MASK_KILL );
989
990	// deschedule calling thread
991	unsigned int save_sr;
992	_it_disable( &save_sr );
993
994	_ctx_switch();
995
996	return SYSCALL_OK;
997
998	} // end _sys_pthread_exit()
999
1000	////////////////////////
1001	int _sys_pthread_yield()
1002	{
1003	unsigned int save_sr;
1004
1005	_it_disable( &save_sr );
1006	_ctx_switch();
1007	_it_restore( &save_sr );
1008
1009	return SYSCALL_OK;
1010	}
1011
1012	//////////////////////////////////////////////////
1013	int _sys_pthread_control( unsigned int command,
1014	char* vspace_name,
1015	char* thread_name )
1016	{
1017
1018	#if GIET_DEBUG_EXEC
1019	unsigned int gpid = _get_procid();
1020	unsigned int cluster_xy = gpid >> P_WIDTH;
1021	unsigned int p = gpid & ((1<<P_WIDTH)-1);
1022	unsigned int x = cluster_xy >> Y_WIDTH;
1023	unsigned int y = cluster_xy & ((1<<Y_WIDTH)-1);
1024	if ( _get_proctime() > GIET_DEBUG_EXEC )
1025	_printf("\n[DEBUG EXEC] _sys_pthread_control() at cycle %d\n"
1026	"P[%d,%d,%d] enter for vspace %s / thread %s / command = %d\n",
1027	_get_proctime() , x , y , p , vspace_name, thread_name, command );
1028	#endif
1029
1030	// get pointers in mapping
1031	mapping_header_t* header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
1032	mapping_thread_t* thread = _get_thread_base(header);
1033	mapping_vspace_t* vspace = _get_vspace_base(header);
1034	mapping_cluster_t* cluster = _get_cluster_base(header);
1035
1036	unsigned int found;
1037
1038	// search vspace name to get vspace index: vsid
1039	found = 0;
1040	unsigned int vsid;
1041	for( vsid = 0 ; vsid < header->vspaces ; vsid++ )
1042	{
1043	if ( _strcmp( vspace[vsid].name, vspace_name ) == 0 )
1044	{
1045	found = 1;
1046	break;
1047	}
1048	}
1049
1050	if ( found == 0 ) return SYSCALL_VSPACE_NOT_FOUND;
1051
1052	// search thread name in vspace to get thread index: tid
1053	found = 0;
1054	unsigned int tid;
1055	unsigned int min = vspace[vsid].thread_offset;
1056	unsigned int max = min + vspace[vsid].threads;
1057	for( tid = min ; tid < max ; tid++ )
1058	{
1059	if ( _strcmp( thread[tid].name, thread_name ) == 0 )
1060	{
1061	found = 1;
1062	break;
1063	}
1064	}
1065
1066	if ( found == 0 ) return SYSCALL_THREAD_NOT_FOUND;
1067
1068	// get target thread coordinates
1069	unsigned int cid = thread[tid].clusterid;
1070	unsigned int cx = cluster[cid].x;
1071	unsigned int cy = cluster[cid].y;
1072	unsigned int cp = thread[tid].proclocid;
1073	unsigned int ltid = thread[tid].ltid;
1074
1075	// get target thread scheduler
1076	static_scheduler_t* psched = _schedulers[cx][cy][cp];
1077
1078	// check trdid and vsid
1079	unsigned int trdid = cx<<24 \| cy<<16 \| cp<<8 \| ltid;
1080	if ( (psched->context[ltid].slot[CTX_TRDID_ID] != trdid) \|\|
1081	(psched->context[ltid].slot[CTX_VSID_ID] != vsid) )
1082	{
1083	return SYSCALL_UNCOHERENT_THREAD_CONTEXT;
1084	}
1085
1086	// execute command
1087	if ( command == THREAD_CMD_PAUSE )
1088	{
1089	_atomic_or ( &psched->context[ltid].slot[CTX_NORUN_ID], NORUN_MASK_THREAD );
1090	return SYSCALL_OK;
1091	}
1092	else if ( command == THREAD_CMD_RESUME )
1093	{
1094	_atomic_and( &psched->context[ltid].slot[CTX_NORUN_ID], ~NORUN_MASK_THREAD );
1095	return SYSCALL_OK;
1096	}
1097	else if ( command == THREAD_CMD_CONTEXT )
1098	{
1099	_user_printf( " - CTX_TRDID = %x\n"
1100	" - CTX_VSID = %x\n"
1101	" - CTX_EPC = %x\n"
1102	" - CTX_PTAB = %x\n"
1103	" - CTX_PTPR = %x\n"
1104	" - CTX_SR = %x\n"
1105	" - CTX_RA = %x\n"
1106	" - CTX_SP = %x\n"
1107	" - CTX_ENTRY = %x\n"
1108	" - CTX_NORUN = %x\n"
1109	" - CTX_SIGS = %x\n"
1110	" - CTX_LOCKS = %x\n"
1111	" - CTX_TTY = %x\n"
1112	" - CTX_NIC_RX = %x\n"
1113	" - CTX_NIC_TX = %x\n"
1114	" - CTX_CMA_RX = %x\n"
1115	" - CTX_CMA_TX = %x\n"
1116	" - CTX_CMA_FB = %x\n",
1117	psched->context[ltid].slot[CTX_TRDID_ID],
1118	psched->context[ltid].slot[CTX_VSID_ID],
1119	psched->context[ltid].slot[CTX_EPC_ID],
1120	psched->context[ltid].slot[CTX_PTAB_ID],
1121	psched->context[ltid].slot[CTX_PTPR_ID],
1122	psched->context[ltid].slot[CTX_SR_ID],
1123	psched->context[ltid].slot[CTX_RA_ID],
1124	psched->context[ltid].slot[CTX_SP_ID],
1125	psched->context[ltid].slot[CTX_ENTRY_ID],
1126	psched->context[ltid].slot[CTX_NORUN_ID],
1127	psched->context[ltid].slot[CTX_SIGS_ID],
1128	psched->context[ltid].slot[CTX_LOCKS_ID],
1129	psched->context[ltid].slot[CTX_TTY_ID],
1130	psched->context[ltid].slot[CTX_NIC_RX_ID],
1131	psched->context[ltid].slot[CTX_NIC_TX_ID],
1132	psched->context[ltid].slot[CTX_CMA_RX_ID],
1133	psched->context[ltid].slot[CTX_CMA_TX_ID],
1134	psched->context[ltid].slot[CTX_CMA_FB_ID] );
1135	return SYSCALL_OK;
1136	}
1137	else
1138	{
1139	return SYSCALL_ILLEGAL_THREAD_COMMAND_TYPE;
1140	}
1141
1142	} // end _sys_pthread_control()
1143
1144
1145
1146
1147	//////////////////////////////////////////////////////////////////////////////
1148	// Coprocessors related syscall handlers
1149	//////////////////////////////////////////////////////////////////////////////
1150
1151	//////////////////////////////////////////////////
1152	int _sys_coproc_alloc( unsigned int coproc_type,
1153	unsigned int* coproc_info )
1154	{
1155	// In this implementation, the allocation policy is constrained:
1156	// the coprocessor must be in the same cluster as the calling thread,
1157	// and there is at most one coprocessor per cluster
1158
1159	mapping_header_t * header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
1160	mapping_cluster_t * cluster = _get_cluster_base(header);
1161	mapping_periph_t * periph = _get_periph_base(header);
1162
1163	// get cluster coordinates and cluster global index
1164	unsigned int procid = _get_procid();
1165	unsigned int x = procid >> (Y_WIDTH + P_WIDTH);
1166	unsigned int y = (procid >> P_WIDTH) & ((1<<Y_WIDTH)-1);
1167	unsigned int cluster_id = x * Y_SIZE + y;
1168
1169	// search coprocessor in cluster
1170	mapping_periph_t* found = NULL;
1171	unsigned int min = cluster[cluster_id].periph_offset;
1172	unsigned int max = min + cluster[cluster_id].periphs;
1173	unsigned int periph_id;
1174	for ( periph_id = min ; periph_id < max ; periph_id++ )
1175	{
1176	if ( (periph[periph_id].type == PERIPH_TYPE_MWR) &&
1177	(periph[periph_id].subtype == coproc_type) )
1178	{
1179	found = &periph[periph_id];
1180	break;
1181	}
1182	}
1183
1184	if ( found != NULL )
1185	{
1186	// get the lock (at most one coproc per cluster)
1187	_simple_lock_acquire( &_coproc_lock[cluster_id] );
1188
1189	// register coproc characteristics in kernel arrays
1190	_coproc_type[cluster_id] = coproc_type;
1191	_coproc_info[cluster_id] = (found->arg0 & 0xFF) \|
1192	(found->arg1 & 0xFF)<<8 \|
1193	(found->arg2 & 0xFF)<<16 \|
1194	(found->arg3 & 0xFF)<<24 ;
1195
1196	// returns coprocessor info
1197	*coproc_info = _coproc_info[cluster_id];
1198
1199	// register coprocessor coordinates in thread context
1200	unsigned int cluster_xy = (x<<Y_WIDTH) + y;
1201	_set_context_slot( CTX_COPROC_ID , cluster_xy );
1202
1203	#if GIET_DEBUG_COPROC
1204	_printf("\n[DEBUG COPROC] _sys_coproc_alloc() at cycle %d\n"
1205	"coproc_info = %x / cluster_xy = %x\n",
1206	_get_proctime() , *coproc_info , cluster_xy );
1207	#endif
1208	return SYSCALL_OK;
1209	}
1210	else
1211	{
1212	_printf("\n[GIET_ERROR] in _sys_coproc_alloc(): "
1213	"no coprocessor with type %d in cluster[%d,%d]\n",
1214	coproc_type , x , y );
1215
1216	return SYSCALL_COPROCESSOR_NOT_FOUND;
1217	}
1218	} // end _sys_coproc_alloc()
1219
1220	////////////////////////////////////////////////////////
1221	int _sys_coproc_release( unsigned int coproc_reg_index )
1222	{
1223	// get thread trdid
1224	unsigned int trdid = _get_thread_trdid();
1225
1226	// get coprocessor coordinates
1227	unsigned int cluster_xy = _get_context_slot( CTX_COPROC_ID );
1228
1229	if ( cluster_xy > 0xFF )
1230	{
1231	_printf("\n[GIET_ERROR] in _sys_coproc_release(): "
1232	"no coprocessor allocated to thread %x\n", trdid );
1233
1234	return SYSCALL_COPROCESSOR_NON_ALLOCATED;
1235	}
1236
1237	unsigned int cx = cluster_xy >> Y_WIDTH;
1238	unsigned int cy = cluster_xy & ((1<<Y_WIDTH)-1);
1239	unsigned int cluster_id = cx * Y_SIZE + cy;
1240	unsigned int info = _coproc_info[cluster_id];
1241	unsigned int nb_to = info & 0xFF;
1242	unsigned int nb_from = (info>>8) & 0xFF;
1243	unsigned int channel;
1244
1245	// stops coprocessor and communication channels
1246	_mwr_set_coproc_register( cluster_xy , coproc_reg_index , 0 );
1247	for ( channel = 0 ; channel < (nb_from + nb_to) ; channel++ )
1248	{
1249	_mwr_set_channel_register( cluster_xy , channel , MWR_CHANNEL_RUNNING , 0 );
1250	}
1251
1252	// deallocates coprocessor coordinates in thread context
1253	_set_context_slot( CTX_COPROC_ID , 0xFFFFFFFF );
1254
1255	// release coprocessor lock
1256	_simple_lock_release( &_coproc_lock[cluster_id] );
1257
1258	#if GIET_DEBUG_COPROC
1259	_printf("\n[DEBUG COPROC] _sys_coproc_release() at cycle %d\n"
1260	"thread %x release coprocessor in cluster[%d,%d]\n", cx, cy );
1261	#endif
1262
1263	return SYSCALL_OK;
1264	} // end _sys_coproc_release()
1265
1266	//////////////////////////////////////////////////////////////
1267	int _sys_coproc_channel_init( unsigned int channel,
1268	giet_coproc_channel_t* desc )
1269	{
1270	// get thread trdid
1271	unsigned int trdid = _get_thread_trdid();
1272
1273	// get coprocessor coordinates
1274	unsigned int cluster_xy = _get_context_slot( CTX_COPROC_ID );
1275
1276	if ( cluster_xy > 0xFF )
1277	{
1278	_printf("\n[GIET_ERROR] in _sys_coproc_channel_init(): "
1279	"no coprocessor allocated to thread %x\n", trdid );
1280
1281	return SYSCALL_COPROCESSOR_NON_ALLOCATED;
1282	}
1283
1284	// check channel mode
1285	unsigned mode = desc->channel_mode;
1286	if ( (mode != MODE_MWMR) &&
1287	(mode != MODE_DMA_IRQ) &&
1288	(mode != MODE_DMA_NO_IRQ) )
1289	{
1290	_printf("\n[GIET_ERROR] in _sys_coproc_channel_init(): "
1291	"illegal mode\n");
1292
1293	return SYSCALL_COPROCESSOR_ILLEGAL_MODE;
1294	}
1295
1296	// get memory buffer size
1297	unsigned int size = desc->buffer_size;
1298
1299	// physical addresses
1300	unsigned long long buffer_paddr;
1301	unsigned int buffer_lsb;
1302	unsigned int buffer_msb;
1303	unsigned long long mwmr_paddr = 0;
1304	unsigned int mwmr_lsb;
1305	unsigned int mwmr_msb;
1306	unsigned long long lock_paddr = 0;
1307	unsigned int lock_lsb;
1308	unsigned int lock_msb;
1309
1310	unsigned int flags; // unused
1311
1312	// compute memory buffer physical address
1313	buffer_paddr = _v2p_translate( desc->buffer_vaddr , &flags );
1314	buffer_lsb = (unsigned int)buffer_paddr;
1315	buffer_msb = (unsigned int)(buffer_paddr>>32);
1316
1317	// call MWMR_DMA driver
1318	_mwr_set_channel_register( cluster_xy, channel, MWR_CHANNEL_MODE, mode );
1319	_mwr_set_channel_register( cluster_xy, channel, MWR_CHANNEL_SIZE, size );
1320	_mwr_set_channel_register( cluster_xy, channel, MWR_CHANNEL_BUFFER_LSB, buffer_lsb );
1321	_mwr_set_channel_register( cluster_xy, channel, MWR_CHANNEL_BUFFER_MSB, buffer_msb );
1322
1323	if ( mode == MODE_MWMR )
1324	{
1325	// compute MWMR descriptor physical address
1326	mwmr_paddr = _v2p_translate( desc->mwmr_vaddr , &flags );
1327	mwmr_lsb = (unsigned int)mwmr_paddr;
1328	mwmr_msb = (unsigned int)(mwmr_paddr>>32);
1329
1330	// call MWMR_DMA driver
1331	_mwr_set_channel_register( cluster_xy, channel, MWR_CHANNEL_MWMR_LSB, mwmr_lsb );
1332	_mwr_set_channel_register( cluster_xy, channel, MWR_CHANNEL_MWMR_MSB, mwmr_msb );
1333
1334	// compute lock physical address
1335	lock_paddr = _v2p_translate( desc->lock_vaddr , &flags );
1336	lock_lsb = (unsigned int)lock_paddr;
1337	lock_msb = (unsigned int)(lock_paddr>>32);
1338
1339	// call MWMR_DMA driver
1340	_mwr_set_channel_register( cluster_xy, channel, MWR_CHANNEL_LOCK_LSB, lock_lsb );
1341	_mwr_set_channel_register( cluster_xy, channel, MWR_CHANNEL_LOCK_MSB, lock_msb );
1342	}
1343
1344	#if GIET_DEBUG_COPROC
1345	_printf("\n[DEBUG COPROC] _sys_coproc_channel_init() at cycle %d\n"
1346	"cluster[%d,%d] / channel = %d / mode = %d / buffer_size = %d\n"
1347	" buffer_paddr = %l / mwmr_paddr = %l / lock_paddr = %l\n",
1348	_get_proctime() , x , y , channel , mode , size ,
1349	buffer_paddr, mwmr_paddr, lock_paddr );
1350	#endif
1351
1352	return SYSCALL_OK;
1353	} // end _sys_coproc_channel_init()
1354
1355	////////////////////////////////////////////////////
1356	int _sys_coproc_run( unsigned int coproc_reg_index )
1357	{
1358	// get thread trdid
1359	unsigned int trdid = _get_thread_trdid();
1360
1361	// get coprocessor coordinates
1362	unsigned int cluster_xy = _get_context_slot( CTX_COPROC_ID );
1363
1364	if ( cluster_xy > 0xFF )
1365	{
1366	_printf("\n[GIET_ERROR] in _sys_coproc_run(): "
1367	"no coprocessor allocated to thread %d\n", trdid );
1368
1369	return SYSCALL_COPROCESSOR_NON_ALLOCATED;
1370	}
1371
1372	unsigned int cx = cluster_xy >> Y_WIDTH;
1373	unsigned int cy = cluster_xy & ((1<<Y_WIDTH)-1);
1374	unsigned int cluster_id = cx * Y_SIZE + cy;
1375	unsigned int info = _coproc_info[cluster_id];
1376	unsigned int nb_to = info & 0xFF;
1377	unsigned int nb_from = (info>>8) & 0xFF;
1378	unsigned int mode = 0xFFFFFFFF;
1379	unsigned int channel;
1380
1381	// register coprocessor running mode
1382	for ( channel = 0 ; channel < (nb_from + nb_to) ; channel++ )
1383	{
1384	unsigned int temp;
1385	temp = _mwr_get_channel_register( cluster_xy , channel , MWR_CHANNEL_MODE );
1386
1387	if ( mode == 0xFFFFFFFF )
1388	{
1389	mode = temp;
1390	}
1391	else if ( temp != mode )
1392	{
1393	_printf("\n[GIET_ERROR] in _sys_coproc_run(): "
1394	"channels don't have same mode in coprocessor[%d,%d]\n", cx , cy );
1395
1396	return SYSCALL_COPROCESSOR_ILLEGAL_MODE;
1397	}
1398	}
1399	_coproc_mode[cluster_id] = mode;
1400
1401	// start all communication channels
1402	for ( channel = 0 ; channel < (nb_from + nb_to) ; channel++ )
1403	{
1404	_mwr_set_channel_register( cluster_xy , channel , MWR_CHANNEL_RUNNING , 1 );
1405	}
1406
1407	//////////////////////////////////////////////////////////////////////////
1408	if ( (mode == MODE_MWMR) \|\| (mode == MODE_DMA_NO_IRQ) ) // no descheduling
1409	{
1410	// start coprocessor
1411	_mwr_set_coproc_register( cluster_xy , coproc_reg_index , 1 );
1412
1413	#if GIET_DEBUG_COPROC
1414	if ( mode == MODE_MWMR )
1415	_printf("\n[DEBUG COPROC] _sys_coproc_run() at cycle %d\n"
1416	"thread %x starts coprocessor[%d,%d] in MODE_MWMR\n",
1417	_get_proctime() , trdid , cx , cy );
1418	else
1419	_printf("\n[DEBUG COPROC] _sys_coproc_run() at cycle %d\n"
1420	"thread %x starts coprocessor[%d,%d] in MODE_DMA_NO_IRQ\n",
1421	_get_proctime() , trdid , cx , cy );
1422	#endif
1423
1424	return SYSCALL_OK;
1425	}
1426	///////////////////////////////////////////////////////////////////////////
1427	else // mode == MODE_DMA_IRQ => descheduling
1428	{
1429	// set _coproc_trdid
1430	unsigned int gpid = _get_procid();
1431	unsigned int x = gpid >> (Y_WIDTH+P_WIDTH);
1432	unsigned int y = (gpid >> P_WIDTH) & ((1<<Y_WIDTH)-1);
1433	unsigned int p = gpid & ((1<<P_WIDTH)-1);
1434	unsigned int ltid = _get_thread_ltid();
1435	_coproc_trdid[cluster_id] = (x<<24) + (y<<16) + (p<<8) + ltid;
1436
1437	// enters critical section
1438	unsigned int save_sr;
1439	_it_disable( &save_sr );
1440
1441	// set NORUN_MASK_COPROC bit
1442	static_scheduler_t* psched = (static_scheduler_t*)_schedulers[x][y][p];
1443	unsigned int* ptr = &psched->context[ltid].slot[CTX_NORUN_ID];
1444	_atomic_or( ptr , NORUN_MASK_COPROC );
1445
1446	// start coprocessor
1447	_mwr_set_coproc_register( cluster_xy , coproc_reg_index , 1 );
1448
1449	#if GIET_DEBUG_COPROC
1450	_printf("\n[DEBUG COPROC] _sys_coproc_run() at cycle %d\n"
1451	"thread %x starts coprocessor[%d,%d] in MODE_DMA_IRQ\n",
1452	_get_proctime() , trdid , cx , cy );
1453	#endif
1454
1455	// deschedule thread
1456	_ctx_switch();
1457
1458	#if GIET_DEBUG_COPROC
1459	_printf("\n[DEBUG COPROC] _sys_coproc_run() at cycle %d\n"
1460	"thread %x resume after coprocessor[%d,%d] completion\n",
1461	_get_proctime() , trdid , cx , cy );
1462	#endif
1463
1464	// restore SR
1465	_it_restore( &save_sr );
1466
1467	// return error computed by mwr_isr()
1468	return _coproc_error[cluster_id];
1469	}
1470	} // end _sys_coproc_run()
1471
1472	///////////////////////////
1473	int _sys_coproc_completed()
1474	{
1475	// get thread trdid
1476	unsigned int trdid = _get_thread_trdid();
1477
1478	// get coprocessor coordinates
1479	unsigned int cluster_xy = _get_context_slot( CTX_COPROC_ID );
1480
1481	if ( cluster_xy > 0xFF )
1482	{
1483	_printf("\n[GIET_ERROR] in _sys_coproc_completed(): "
1484	"no coprocessor allocated to thread %x\n", trdid );
1485
1486	return SYSCALL_COPROCESSOR_NON_ALLOCATED;
1487	}
1488
1489	unsigned int cx = cluster_xy >> Y_WIDTH;
1490	unsigned int cy = cluster_xy & ((1<<Y_WIDTH)-1);
1491	unsigned int cluster_id = cx * Y_SIZE + cy;
1492	unsigned int mode = _coproc_mode[cluster_id];
1493
1494	// analyse possible errors
1495	if ( mode == MODE_DMA_NO_IRQ )
1496	{
1497	unsigned int info = _coproc_info[cluster_id];
1498	unsigned int nb_to = info & 0xFF;
1499	unsigned int nb_from = (info>>8) & 0xFF;
1500	unsigned int error = 0;
1501	unsigned int channel;
1502	unsigned int status;
1503
1504	// get status for all channels, and signal reported errors
1505	for ( channel = 0 ; channel < (nb_to +nb_from) ; channel++ )
1506	{
1507	do
1508	{
1509	status = _mwr_get_channel_register( cluster_xy, channel,
1510	MWR_CHANNEL_STATUS );
1511	if ( status == MWR_CHANNEL_ERROR_DATA )
1512	{
1513	_printf("\n[GIET_ERROR] in _sys_coproc_completed(): "
1514	"channel %d / DATA_ERROR\n", channel );
1515	error = 1;
1516	}
1517	else if ( status == MWR_CHANNEL_ERROR_LOCK )
1518	{
1519	_printf("\n[GIET_ERROR] in _sys_coproc_completed()"
1520	" / channel %d / LOCK_ERROR\n", channel );
1521	error = 1;
1522	}
1523	else if ( status == MWR_CHANNEL_ERROR_DESC )
1524	{
1525	_printf("\n[GIET_ERROR] in _sys_coproc_completed()"
1526	" / channel %d / DESC_ERROR\n", channel );
1527	error = 1;
1528	}
1529	}
1530	while ( status == MWR_CHANNEL_BUSY );
1531
1532	// reset channel
1533	_mwr_set_channel_register( cluster_xy, channel,
1534	MWR_CHANNEL_RUNNING , 0 );
1535
1536	} // end for channels
1537
1538	if ( error )
1539	{
1540	return SYSCALL_COPROCESSOR_ILLEGAL_MODE;
1541	}
1542	else
1543	{
1544
1545	#if GIET_DEBUG_COPROC
1546	_printf("\n[DEBUG COPROC] _sys_coproc_completed() at cycle %d\n"
1547	"coprocessor[%d,%d] successfully completes operation for thread %d\n",
1548	cx , cy , trdid );
1549	#endif
1550	return SYSCALL_OK;
1551	}
1552	}
1553	else // mode == MODE_MWMR or MODE_DMA_IRQ
1554	{
1555	_printf("\n[GIET ERROR] in sys_coproc_completed(): "
1556	"coprocessor[%d,%d] is not running in MODE_DMA_NO_IRQ\n", cx , cy );
1557
1558	return SYSCALL_COPROCESSOR_ILLEGAL_MODE;
1559	}
1560	} // end _sys_coproc_completed()
1561
1562
1563	//////////////////////////////////////////////////////////////////////////////
1564	// TTY related syscall handlers
1565	//////////////////////////////////////////////////////////////////////////////
1566
1567	/////////////////////////////////////////
1568	int _sys_tty_alloc( unsigned int shared )
1569	{
1570	unsigned int channel; // allocated TTY channel
1571
1572	// get trdid and vsid for the calling thread
1573	unsigned int vsid = _get_context_slot( CTX_VSID_ID );
1574	unsigned int trdid = _get_thread_trdid();
1575
1576	// check no TTY already allocated to calling thread
1577	if ( _get_context_slot( CTX_TTY_ID ) < NB_TTY_CHANNELS )
1578	{
1579	_printf("\n[GIET_ERROR] in _sys_tty_alloc() : "
1580	"TTY channel already allocated to thread %x\n", trdid );
1581	return SYSCALL_CHANNEL_ALREADY_ALLOCATED;
1582	}
1583
1584	mapping_header_t header = (mapping_header_t )SEG_BOOT_MAPPING_BASE;
1585	mapping_vspace_t *vspace = _get_vspace_base(header);
1586	mapping_thread_t *thread = _get_thread_base(header);
1587
1588	// compute number of users
1589	unsigned int users;
1590	if ( shared ) users = vspace[vsid].threads;
1591	else users = 1;
1592
1593	// get a TTY channel
1594	for ( channel = 0 ; channel < NB_TTY_CHANNELS ; channel++ )
1595	{
1596	unsigned int* palloc = &_tty_channel_alloc[channel];
1597
1598	if ( _atomic_test_and_set( palloc , users ) == 0 ) break;
1599	}
1600	if ( channel >= NB_TTY_CHANNELS )
1601	{
1602	_printf("\n[GIET_ERROR] in _sys_tty_alloc() : "
1603	"no TTY channel available for thread %x\n", trdid );
1604	return SYSCALL_NO_CHANNEL_AVAILABLE;
1605	}
1606
1607	// initialise allocated TTY channel
1608	_tty_init( channel );
1609
1610	// allocate a WTI mailbox to the calling proc if external IRQ
1611	unsigned int wti_id;
1612	if ( USE_PIC ) _ext_irq_alloc( ISR_TTY_RX , channel , &wti_id );
1613
1614	// register wti_id and coordinates for processor receiving WTI
1615	unsigned int procid = _get_procid();
1616	unsigned int x = procid >> (Y_WIDTH + P_WIDTH);
1617	unsigned int y = (procid >> P_WIDTH) & ((1<<Y_WIDTH)-1);
1618	unsigned int p = procid & ((1<<P_WIDTH)-1);
1619	_tty_channel_wti[channel] = x<<24 \| y<<16 \| p<<8 \| wti_id;
1620
1621	// update CTX_TTY_ID
1622	if ( shared ) // for all threads in vspace
1623	{
1624	// scan threads in vspace
1625	unsigned int tid;
1626	for (tid = vspace[vsid].thread_offset;
1627	tid < (vspace[vsid].thread_offset + vspace[vsid].threads);
1628	tid++)
1629	{
1630	unsigned int y_size = header->y_size;
1631	unsigned int cid = thread[tid].clusterid;
1632	unsigned int x = cid / y_size;
1633	unsigned int y = cid % y_size;
1634	unsigned int p = thread[tid].proclocid;
1635	unsigned int ltid = thread[tid].ltid;
1636	static_scheduler_t* psched = (static_scheduler_t*)_schedulers[x][y][p];
1637
1638	psched->context[ltid].slot[CTX_TTY_ID] = channel;
1639	}
1640	}
1641	else // for calling thread only
1642	{
1643	_set_context_slot( CTX_TTY_ID, channel );
1644	}
1645
1646	return SYSCALL_OK;
1647	} // end _sys_tty_alloc()
1648
1649	//////////////////////
1650	int _sys_tty_release() // NOTE: not a syscall: used by _ctx_kill_thread()
1651	{
1652	unsigned int channel = _get_context_slot( CTX_TTY_ID );
1653
1654	if ( channel == -1 )
1655	{
1656	unsigned int trdid = _get_thread_trdid();
1657	_printf("\n[GIET_ERROR] in _sys_tty_release() : "
1658	"TTY channel already released for thread %x\n", trdid );
1659
1660	return SYSCALL_CHANNEL_ALREADY_ALLOCATED;
1661	}
1662
1663	// reset CTX_TTY_ID for the calling thread
1664	_set_context_slot( CTX_TTY_ID , 0xFFFFFFFF );
1665
1666	// atomically decrement the _tty_channel_allocator[] array
1667	_atomic_increment( &_tty_channel_alloc[channel] , -1 );
1668
1669	// release WTI mailbox if TTY channel no more used
1670	if ( USE_PIC && (_tty_channel_alloc[channel] == 0) )
1671	{
1672	_ext_irq_release( ISR_TTY_RX , channel );
1673	}
1674
1675	return SYSCALL_OK;
1676	} // end sys_tty_release()
1677
1678	////////////////////////////////////////
1679	int _sys_tty_write( const char* buffer,
1680	unsigned int length, // number of characters
1681	unsigned int channel) // channel index
1682	{
1683	unsigned int nwritten;
1684
1685	// compute and check tty channel
1686	if( channel == 0xFFFFFFFF ) channel = _get_context_slot(CTX_TTY_ID);
1687
1688	if( channel >= NB_TTY_CHANNELS )
1689	{
1690	_printf("\n[GIET_ERROR] in _sys_tty_write() : "
1691	"no TTY channel allocated for thread %x\n", _get_thread_trdid() );
1692
1693	return SYSCALL_CHANNEL_NON_ALLOCATED;
1694	}
1695
1696	// write string to TTY channel
1697	for (nwritten = 0; nwritten < length; nwritten++)
1698	{
1699	// check tty's status
1700	if ( _tty_get_register( channel, TTY_STATUS ) & 0x2 ) break;
1701
1702	// write one byte
1703	if (buffer[nwritten] == '\n')
1704	{
1705	_tty_set_register( channel, TTY_WRITE, (unsigned int)'\r' );
1706	}
1707	_tty_set_register( channel, TTY_WRITE, (unsigned int)buffer[nwritten] );
1708	}
1709
1710	return nwritten;
1711	}
1712
1713	///////////////////////////////////////
1714	int _sys_tty_read( char* buffer,
1715	unsigned int length, // unused
1716	unsigned int channel) // channel index
1717	{
1718	// compute and check tty channel
1719	if( channel == 0xFFFFFFFF ) channel = _get_context_slot(CTX_TTY_ID);
1720
1721	if( channel >= NB_TTY_CHANNELS )
1722	{
1723	_printf("\n[GIET_ERROR] in _sys_tty_read() : "
1724	"no TTY channel allocated for thread %x\n", _get_thread_trdid() );
1725
1726	return SYSCALL_CHANNEL_NON_ALLOCATED;
1727	}
1728
1729	unsigned int save_sr;
1730	unsigned int found = 0;
1731
1732	// get pointer on TTY_RX FIFO
1733	tty_fifo_t* fifo = &_tty_rx_fifo[channel];
1734
1735	// try to read one character from FIFO
1736	// blocked in while loop until success
1737	while ( found == 0 )
1738	{
1739	if ( fifo->sts == 0) // FIFO empty => deschedule
1740	{
1741	// enters critical section
1742	_it_disable( &save_sr );
1743
1744	// set NORUN_MASK_TTY bit for calling thread
1745	static_scheduler_t* psched = (static_scheduler_t*)_get_sched();
1746	unsigned int ltid = psched->current;
1747	_atomic_or( &psched->context[ltid].slot[CTX_NORUN_ID] , NORUN_MASK_TTY );
1748
1749	// register descheduling thread trdid
1750	fifo->trdid = _get_thread_trdid();
1751
1752	// deschedule calling thread
1753	_ctx_switch();
1754
1755	// exit critical section
1756	_it_restore( &save_sr );
1757	}
1758	else // FIFO not empty => get one character
1759	{
1760	*buffer = fifo->data[fifo->ptr];
1761	fifo->sts = fifo->sts - 1;
1762	fifo->ptr = (fifo->ptr + 1) % TTY_FIFO_DEPTH;
1763	found = 1;
1764	}
1765	}
1766
1767	return 1;
1768	}
1769
1770
1771
1772	//////////////////////////////////////////////////////////////////////////////
1773	// TIMER related syscall handlers
1774	//////////////////////////////////////////////////////////////////////////////
1775
1776	////////////////////
1777	int _sys_tim_alloc()
1778	{
1779
1780	#if NB_TIM_CHANNELS
1781
1782	unsigned int channel; // allocated TIMER channel
1783
1784	unsigned int trdid = _get_thread_trdid();
1785
1786	// check no TIMER already allocated to calling thread
1787	if ( _get_context_slot( CTX_TIM_ID ) < NB_TIM_CHANNELS )
1788	{
1789	_printf("\n[GIET_ERROR] in _sys_tim_alloc() : "
1790	"TIMER channel already allocated to thread %x\n", trdid );
1791
1792	return SYSCALL_CHANNEL_ALREADY_ALLOCATED;
1793	}
1794
1795	// get a TIMER channel
1796	for ( channel = 0 ; channel < NB_TIM_CHANNELS ; channel++ )
1797	{
1798	unsigned int* palloc = &_tim_channel_alloc[channel];
1799
1800	if ( _atomic_test_and_set( palloc , 1 ) == 0 ) break;
1801	}
1802	if ( channel >= NB_TIM_CHANNELS )
1803	{
1804	_printf("\n[GIET_ERROR] in _sys_tim_alloc() : "
1805	"no TIMER channel available for thread %x\n", trdid );
1806
1807	return SYSCALL_NO_CHANNEL_AVAILABLE;
1808	}
1809
1810	// allocate a WTI mailbox to the calling proc if external IRQ
1811	unsigned int wti_id;
1812	if ( USE_PIC ) _ext_irq_alloc( ISR_TIMER , channel , &wti_id );
1813
1814	// register wti_id and coordinates for processor receiving WTI
1815	unsigned int procid = _get_procid();
1816	unsigned int x = procid >> (Y_WIDTH + P_WIDTH);
1817	unsigned int y = (procid >> P_WIDTH) & ((1<<Y_WIDTH)-1);
1818	unsigned int p = procid & ((1<<P_WIDTH)-1);
1819	_tim_channel_wti[channel] = x<<24 \| y<<16 \| p<<8 \| wti_id;
1820
1821	// update CTX_TIM_ID in thread context
1822	_set_context_slot( CTX_TIM_ID, channel );
1823
1824	return SYSCALL_OK;
1825
1826	#else
1827
1828	_printf("\n[GIET ERROR] in _sys_tim_alloc(): NB_TIM_CHANNELS == 0\n");
1829
1830	return SYSCALL_NO_CHANNEL_AVAILABLE;
1831
1832	#endif
1833	} // end _sys_tim_alloc()
1834
1835
1836	//////////////////////
1837	int _sys_tim_release() // NOTE: not a syscall: used by _ctx_kill_thread()
1838	{
1839
1840	#if NB_TIM_CHANNELS
1841
1842	unsigned int channel = _get_context_slot( CTX_TIM_ID );
1843
1844	if ( channel == -1 )
1845	{
1846	unsigned int trdid = _get_thread_trdid();
1847	_printf("\n[GIET_ERROR] in _sys_tim_release(): "
1848	"TIMER channel already released for thread %x\n", trdid );
1849
1850	return SYSCALL_CHANNEL_ALREADY_ALLOCATED;
1851	}
1852
1853	// reset CTX_TIM_ID for the calling thread
1854	_set_context_slot( CTX_TIM_ID , 0xFFFFFFFF );
1855
1856	// reset the _tim_channel_alloc[] array
1857	_tim_channel_alloc[channel] = 0;
1858
1859	// release WTI mailbox if TTY channel no more used
1860	if ( USE_PIC )
1861	{
1862	_ext_irq_release( PERIPH_TYPE_TIM , channel );
1863	}
1864
1865	return SYSCALL_OK;
1866
1867	#else
1868
1869	_printf("\n[GIET ERROR] in _sys_tim_release(): NB_TIM_CHANNELS = 0\n");
1870
1871	return SYSCALL_NO_CHANNEL_AVAILABLE;
1872
1873	#endif
1874	} // end _sys_tim_release()
1875
1876	/////////////////////////////////////////
1877	int _sys_tim_start( unsigned int period )
1878	{
1879
1880	#if NB_TIM_CHANNELS
1881
1882	// get timer index
1883	unsigned int channel = _get_context_slot( CTX_TIM_ID );
1884
1885	if ( channel >= NB_TIM_CHANNELS )
1886	{
1887	_printf("\n[GIET_ERROR] in _sys_tim_start(): not enough TIM channels\n");
1888
1889	return SYSCALL_NO_CHANNEL_AVAILABLE;
1890	}
1891
1892	// start timer
1893	_timer_start( channel, period );
1894
1895	return SYSCALL_OK;
1896
1897	#else
1898
1899	_printf("\n[GIET ERROR] in _sys_tim_start() : NB_TIM_CHANNELS = 0\n");
1900
1901	return SYSCALL_NO_CHANNEL_AVAILABLE;
1902
1903	#endif
1904	}
1905
1906	///////////////////
1907	int _sys_tim_stop()
1908	{
1909
1910	#if NB_TIM_CHANNELS
1911
1912	// get timer index
1913	unsigned int channel = _get_context_slot( CTX_TIM_ID );
1914
1915	if ( channel >= NB_TIM_CHANNELS )
1916	{
1917	_printf("\n[GIET_ERROR] in _sys_tim_stop() : illegal timer index\n");
1918
1919	return SYSCALL_CHANNEL_NON_ALLOCATED;
1920	}
1921
1922	// stop timer
1923	_timer_stop( channel );
1924
1925	return SYSCALL_OK;
1926
1927	#else
1928
1929	_printf("\n[GIET ERROR] in _sys_tim_stop() : NB_TIM_CHANNELS = 0\n");
1930
1931	return SYSCALL_NO_CHANNEL_AVAILABLE;
1932
1933	#endif
1934	}
1935
1936
1937	//////////////////////////////////////////////////////////////////////////////
1938	// NIC related syscall handlers
1939	//////////////////////////////////////////////////////////////////////////////
1940
1941	#define NIC_CONTAINER_SIZE 4096
1942
1943	#if NB_NIC_CHANNELS
1944
1945	////////////////////////////////////////
1946	int _sys_nic_alloc( unsigned int is_rx,
1947	unsigned int xmax,
1948	unsigned int ymax )
1949	{
1950	mapping_header_t header = (mapping_header_t )SEG_BOOT_MAPPING_BASE;
1951	mapping_vspace_t *vspace = _get_vspace_base(header);
1952	mapping_thread_t *thread = _get_thread_base(header);
1953
1954	// get calling thread trdid, vspace index, and number of threads
1955	unsigned int trdid = _get_thread_trdid();
1956	unsigned int vsid = _get_context_slot( CTX_VSID_ID );
1957	unsigned int users = vspace[vsid].threads;
1958
1959	// check xmax / ymax parameters
1960	if ( (xmax > X_SIZE) \|\| (ymax > Y_SIZE) )
1961	{
1962	_printf("\n[GIET_ERROR] in _sys_nic_alloc() "
1963	"xmax or ymax argument too large for thread %x\n", trdid );
1964
1965	return SYSCALL_ILLEGAL_XY_ARGUMENTS;
1966	}
1967
1968	////////////////////////////////////////////////////////
1969	// Step 1: get and register CMA and NIC channel index //
1970	////////////////////////////////////////////////////////
1971
1972	unsigned int nic_channel;
1973	unsigned int cma_channel;
1974	unsigned int* palloc;
1975
1976	// get a NIC_RX or NIC_TX channel
1977	for ( nic_channel = 0 ; nic_channel < NB_NIC_CHANNELS ; nic_channel++ )
1978	{
1979	if ( is_rx ) palloc = &_nic_rx_channel_alloc[nic_channel];
1980	else palloc = &_nic_tx_channel_alloc[nic_channel];
1981
1982	if ( _atomic_test_and_set( palloc , users ) == 0 ) break;
1983	}
1984	if ( (nic_channel >= NB_NIC_CHANNELS) )
1985	{
1986	_printf("\n[GIET_ERROR] in _sys_nic_alloc() : "
1987	"no NIC channel available for thread %x\n", trdid );
1988
1989	return SYSCALL_NO_CHANNEL_AVAILABLE;
1990	}
1991
1992	// get a CMA channel
1993	for ( cma_channel = 0 ; cma_channel < NB_CMA_CHANNELS ; cma_channel++ )
1994	{
1995	palloc = &_cma_channel_alloc[cma_channel];
1996
1997	if ( _atomic_test_and_set( palloc , users ) == 0 ) break;
1998	}
1999	if ( cma_channel >= NB_CMA_CHANNELS )
2000	{
2001	_printf("\n[GIET_ERROR] in _sys_nic_alloc() : "
2002	"no CMA channel available for thread %x\n", trdid );
2003	if ( is_rx ) _nic_rx_channel_alloc[nic_channel] = 0;
2004	else _nic_tx_channel_alloc[nic_channel] = 0;
2005
2006	return SYSCALL_NO_CHANNEL_AVAILABLE;
2007	}
2008
2009	#if GIET_DEBUG_NIC
2010	_printf("\n[DEBUG NIC] sys_nic_alloc() at cycle %d\n"
2011	"thread %d get nic_channel = %d / cma_channel = %d\n",
2012	_get_proctime() , trdid , nic_channel , cma_channel );
2013	#endif
2014
2015	// register nic_index and cma_index in all threads
2016	// contexts that are in the same vspace
2017	unsigned int tid;
2018	for (tid = vspace[vsid].thread_offset;
2019	tid < (vspace[vsid].thread_offset + vspace[vsid].threads);
2020	tid++)
2021	{
2022	unsigned int y_size = header->y_size;
2023	unsigned int cid = thread[tid].clusterid;
2024	unsigned int x = cid / y_size;
2025	unsigned int y = cid % y_size;
2026	unsigned int p = thread[tid].proclocid;
2027	unsigned int ltid = thread[tid].ltid;
2028	static_scheduler_t* psched = (static_scheduler_t*)_schedulers[x][y][p];
2029
2030	if ( is_rx )
2031	{
2032	if ( (psched->context[ltid].slot[CTX_NIC_RX_ID] < NB_NIC_CHANNELS) \|\|
2033	(psched->context[ltid].slot[CTX_CMA_RX_ID] < NB_CMA_CHANNELS) )
2034	{
2035	_printf("\n[GIET_ERROR] in _sys_nic_alloc() : "
2036	"NIC_RX or CMA_RX channel already allocated for thread %x\n", trdid );
2037	_nic_rx_channel_alloc[nic_channel] = 0;
2038	_cma_channel_alloc[cma_channel] = 0;
2039
2040	return SYSCALL_CHANNEL_ALREADY_ALLOCATED;
2041	}
2042	else
2043	{
2044	psched->context[ltid].slot[CTX_NIC_RX_ID] = nic_channel;
2045	psched->context[ltid].slot[CTX_CMA_RX_ID] = cma_channel;
2046	}
2047	}
2048	else // is_tx
2049	{
2050	if ( (psched->context[ltid].slot[CTX_NIC_TX_ID] < NB_NIC_CHANNELS) \|\|
2051	(psched->context[ltid].slot[CTX_CMA_TX_ID] < NB_CMA_CHANNELS) )
2052	{
2053	_printf("\n[GIET_ERROR] in _sys_nic_alloc() : "
2054	"NIC_TX or CMA_TX channel already allocated for thread %x\n", trdid );
2055	_nic_tx_channel_alloc[nic_channel] = 0;
2056	_cma_channel_alloc[cma_channel] = 0;
2057
2058	return SYSCALL_CHANNEL_ALREADY_ALLOCATED;
2059	}
2060	else
2061	{
2062	psched->context[ltid].slot[CTX_NIC_TX_ID] = nic_channel;
2063	psched->context[ltid].slot[CTX_CMA_TX_ID] = cma_channel;
2064	}
2065	}
2066	} // end loop on threads
2067
2068	/////////////////////////////////////////////////////////////////////////////////
2069	// Step 2: loop on all the clusters //
2070	// Allocate the kernel containers and status, compute the container and the //
2071	// status physical addresses, fill and synchronize the kernel CHBUF descriptor //
2072	/////////////////////////////////////////////////////////////////////////////////
2073
2074	// physical addresses to be registered in the CMA registers
2075	unsigned long long nic_chbuf_pbase; // NIC chbuf physical address
2076	unsigned long long ker_chbuf_pbase; // kernel chbuf physical address
2077
2078	// allocate one kernel container and one status variable per cluster in the
2079	// (xmax / ymax) mesh
2080	unsigned int cx; // cluster X coordinate
2081	unsigned int cy; // cluster Y coordinate
2082	unsigned int index; // container index in chbuf
2083	unsigned int vaddr; // virtual address
2084	unsigned long long cont_paddr; // container physical address
2085	unsigned long long sts_paddr; // container status physical address
2086
2087	unsigned int flags; // for _v2p_translate()
2088
2089	for ( cx = 0 ; cx < xmax ; cx++ )
2090	{
2091	for ( cy = 0 ; cy < ymax ; cy++ )
2092	{
2093	// compute index in chbuf
2094	index = (cx * ymax) + cy;
2095
2096	// allocate the kernel container
2097	vaddr = (unsigned int)_remote_malloc( NIC_CONTAINER_SIZE, cx, cy );
2098
2099	if ( vaddr == 0 ) // not enough kernel heap memory in cluster[cx,cy]
2100	{
2101	_printf("\n[GIET_ERROR] in _sys_nic_alloc() : "
2102	"not enough kernel heap in cluster[%d,%d]\n", cx, cy );
2103
2104	return SYSCALL_OUT_OF_KERNEL_HEAP_MEMORY;
2105	}
2106
2107	// compute container physical address
2108	cont_paddr = _v2p_translate( vaddr , &flags );
2109
2110	// checking container address alignment
2111	if ( cont_paddr & 0x3F )
2112	{
2113	_printf("\n[GIET ERROR] in _sys_nic_alloc() : "
2114	"container address in cluster[%d,%d] not aligned\n", cx, cy);
2115
2116	return SYSCALL_ADDRESS_NON_ALIGNED;
2117	}
2118
2119	#if GIET_DEBUG_NIC
2120	_printf("\n[DEBUG NIC] _sys_nic_alloc() at cycle %d\n"
2121	"thread %x allocates a container in cluster[%d,%d] / vaddr = %x / paddr = %l\n",
2122	-get_proctime() , trdid , cx , cy , vaddr, cont_paddr );
2123	#endif
2124
2125	// allocate the kernel container status
2126	// it occupies 64 bytes but only last bit is useful (1 for full and 0 for empty)
2127	vaddr = (unsigned int)_remote_malloc( 64, cx, cy );
2128
2129	if ( vaddr == 0 ) // not enough kernel heap memory in cluster[cx,cy]
2130	{
2131	_printf("\n[GIET_ERROR] in _sys_nic_alloc() : "
2132	"not enough kernel heap in cluster[%d,%d]\n", cx, cy );
2133
2134	return SYSCALL_OUT_OF_KERNEL_HEAP_MEMORY;
2135	}
2136
2137	// compute status physical address
2138	sts_paddr = _v2p_translate( vaddr , &flags );
2139
2140	// checking status address alignment
2141	if ( sts_paddr & 0x3F )
2142	{
2143	_printf("\n[GIET ERROR] in _sys_nic_alloc() : "
2144	"status address in cluster[%d,%d] not aligned\n", cx, cy);
2145
2146	return SYSCALL_ADDRESS_NON_ALIGNED;
2147	}
2148
2149	// initialize chbuf entry
2150	// The buffer descriptor has the following structure:
2151	// - the 26 LSB bits contain bits[6:31] of the buffer physical address
2152	// - the 26 following bits contain bits[6:31] of the physical address where the
2153	// buffer status is located
2154	// - the 12 MSB bits contain the common address extension of the buffer and its
2155	// status
2156	if ( is_rx )
2157	_nic_ker_rx_chbuf[nic_channel].buf_desc[index] =
2158	(unsigned long long)
2159	((sts_paddr & 0xFFFFFFFFULL) >> 6) +
2160	(((cont_paddr & 0xFFFFFFFFFFFULL) >> 6) << 26);
2161	else
2162	_nic_ker_tx_chbuf[nic_channel].buf_desc[index] =
2163	(unsigned long long)
2164	((sts_paddr & 0xFFFFFFC0ULL) >> 6) +
2165	(((cont_paddr & 0xFFFFFFFFFC0ULL) >> 6) << 26);
2166
2167	#if GIET_DEBUG_NIC
2168	_printf("\n[DEBUG NIC] _sys_nic_alloc() at cycle %d\n"
2169	"thread %x allocates a status in cluster[%d,%d] / vaddr = %x / paddr = %l\n"
2170	" descriptor = %l\n",
2171	_get_proctime() , trdid , cx , cy , vaddr, sts_paddr,
2172	(unsigned long long)((sts_paddr & 0xFFFFFFFFULL) >> 6) +
2173	(((cont_paddr & 0xFFFFFFFFFFFULL) >> 6) << 26) );
2174	#endif
2175	}
2176	}
2177
2178	// complete kernel chbuf initialisation
2179	if ( is_rx )
2180	{
2181	_nic_ker_rx_chbuf[nic_channel].xmax = xmax;
2182	_nic_ker_rx_chbuf[nic_channel].ymax = ymax;
2183	}
2184	else
2185	{
2186	_nic_ker_tx_chbuf[nic_channel].xmax = xmax;
2187	_nic_ker_tx_chbuf[nic_channel].ymax = ymax;
2188	}
2189
2190	// compute the kernel chbuf descriptor physical address
2191	if ( is_rx ) vaddr = (unsigned int)( &_nic_ker_rx_chbuf[nic_channel] );
2192	else vaddr = (unsigned int)( &_nic_ker_tx_chbuf[nic_channel] );
2193
2194	ker_chbuf_pbase = _v2p_translate( vaddr , &flags );
2195
2196	#if GIET_DEBUG_NIC
2197	_printf("\n[DEBUG NIC] _sys_nic_alloc() at cycle %d\n"
2198	"thread %x initialise kernel chbuf / vaddr = %x / paddr = %l\n",
2199	_get_proctime() , trdid , vaddr , ker_chbuf_pbase );
2200	#endif
2201
2202	// sync the kernel chbuf in L2 after write in L2
2203	_mmc_sync( ker_chbuf_pbase, sizeof( ker_chbuf_t ) );
2204
2205	///////////////////////////////////////////////////////////////
2206	// Step 3: compute the NIC chbuf descriptor physical address //
2207	///////////////////////////////////////////////////////////////
2208
2209	unsigned int offset;
2210	if ( is_rx ) offset = 0x4100;
2211	else offset = 0x4110;
2212	nic_chbuf_pbase = (((unsigned long long)((X_IO << Y_WIDTH) + Y_IO))<<32) \|
2213	(SEG_NIC_BASE + (nic_channel<<15) + offset);
2214
2215	#if GIET_DEBUG_NIC
2216	_printf("\n[DEBUG NIC] _sys_nic_alloc() at cycle %d\n"
2217	"thread %x get NIC chbuf paddr = %l\n",
2218	_get_proctime() , trdid , nic_chbuf_pbase );
2219	#endif
2220
2221	////////////////////////////////////////////////////////////////////////////////
2222	// Step 4: initialize CMA registers defining the source & destination chbufs //
2223	////////////////////////////////////////////////////////////////////////////////
2224
2225	if ( is_rx ) // NIC to kernel
2226	{
2227	_cma_set_register( cma_channel, CHBUF_SRC_DESC , (unsigned int)(nic_chbuf_pbase) );
2228	_cma_set_register( cma_channel, CHBUF_SRC_EXT , (unsigned int)(nic_chbuf_pbase>>32) );
2229	_cma_set_register( cma_channel, CHBUF_SRC_NBUFS, 2 );
2230	_cma_set_register( cma_channel, CHBUF_DST_DESC , (unsigned int)(ker_chbuf_pbase) );
2231	_cma_set_register( cma_channel, CHBUF_DST_EXT , (unsigned int)(ker_chbuf_pbase>>32) );
2232	_cma_set_register( cma_channel, CHBUF_DST_NBUFS, xmax * ymax );
2233	}
2234	else // kernel to NIC
2235	{
2236	_cma_set_register( cma_channel, CHBUF_SRC_DESC , (unsigned int)(ker_chbuf_pbase) );
2237	_cma_set_register( cma_channel, CHBUF_SRC_EXT , (unsigned int)(ker_chbuf_pbase>>32) );
2238	_cma_set_register( cma_channel, CHBUF_SRC_NBUFS, xmax * ymax );
2239	_cma_set_register( cma_channel, CHBUF_DST_DESC , (unsigned int)(nic_chbuf_pbase) );
2240	_cma_set_register( cma_channel, CHBUF_DST_EXT , (unsigned int)(nic_chbuf_pbase>>32) );
2241	_cma_set_register( cma_channel, CHBUF_DST_NBUFS, 2 );
2242	}
2243
2244	#if GIET_DEBUG_NIC
2245	_printf("\n[DEBUG NIC] _sys_nic_alloc() at cycle %d\n"
2246	"thread %x exit\n",
2247	_get_proctime() , trdid );
2248	#endif
2249
2250	return SYSCALL_OK;
2251	} // end _sys_nic_alloc()
2252
2253
2254	//////////////////////////////////////////
2255	int _sys_nic_release( unsigned int is_rx ) // NOTE: not a syscall: used by _ctx_kill_thread()
2256	{
2257	unsigned int trdid = _get_thread_trdid();
2258
2259	unsigned int nic_channel;
2260	unsigned int cma_channel;
2261
2262	// update the kernel tables
2263	if ( is_rx )
2264	{
2265	nic_channel = _get_context_slot( CTX_NIC_RX_ID );
2266	cma_channel = _get_context_slot( CTX_CMA_RX_ID );
2267
2268	if ( (nic_channel >= NB_NIC_CHANNELS) )
2269	{
2270	_printf("\n[GIET ERROR] in _sys_nic_release() : "
2271	"NIC_RX channel already released for thread %x\n", trdid );
2272
2273	return SYSCALL_CHANNEL_NON_ALLOCATED;
2274	}
2275	if ( (cma_channel >= NB_CMA_CHANNELS) )
2276	{
2277	_printf("\n[GIET ERROR] in _sys_nic_release() : "
2278	"CMA_RX channel already released for thread %x\n", trdid );
2279
2280	return SYSCALL_CHANNEL_NON_ALLOCATED;
2281	}
2282
2283	// atomically decrement the NIC and CMA channel allocators
2284	_atomic_increment( &_nic_rx_channel_alloc[nic_channel] , -1 );
2285	_atomic_increment( &_cma_channel_alloc[cma_channel] , -1 );
2286
2287	// stop the NIC and CMA peripherals channels if no more users
2288	if ( (_nic_rx_channel_alloc[nic_channel] == 0) &&
2289	(_cma_channel_alloc[cma_channel] == 0) ) _sys_nic_stop( 1 );
2290
2291	// reset the calling thread context slots
2292	_set_context_slot( CTX_NIC_RX_ID , 0xFFFFFFFF );
2293	_set_context_slot( CTX_CMA_RX_ID , 0xFFFFFFFF );
2294	}
2295	else
2296	{
2297	nic_channel = _get_context_slot( CTX_NIC_TX_ID );
2298	cma_channel = _get_context_slot( CTX_CMA_TX_ID );
2299
2300	if ( (nic_channel >= NB_NIC_CHANNELS) )
2301	{
2302	_printf("\n[GIET ERROR] in _sys_nic_release() : "
2303	"NIC_TX channel already released for thread %x\n", trdid );
2304
2305	return SYSCALL_CHANNEL_NON_ALLOCATED;
2306	}
2307	if ( (cma_channel >= NB_CMA_CHANNELS) )
2308	{
2309	_printf("\n[GIET ERROR] in _sys_nic_release() : "
2310	"CMA_TX channel already released for thread %x\n", trdid );
2311
2312	return SYSCALL_CHANNEL_NON_ALLOCATED;
2313	}
2314
2315	// atomically decrement the NIC and CMA channel allocators
2316	_atomic_increment( &_nic_tx_channel_alloc[nic_channel] , -1 );
2317	_atomic_increment( &_cma_channel_alloc[cma_channel] , -1 );
2318
2319	// stop the NIC and CMA peripherals channels if no more users
2320	if ( (_nic_tx_channel_alloc[nic_channel] == 0) &&
2321	(_cma_channel_alloc[cma_channel] == 0) ) _sys_nic_stop( 0 );
2322
2323	// reset the calling thread context slots
2324	_set_context_slot( CTX_NIC_TX_ID , 0xFFFFFFFF );
2325	_set_context_slot( CTX_CMA_TX_ID , 0xFFFFFFFF );
2326	}
2327
2328	return SYSCALL_OK;
2329	} // end sys_nic_release()
2330
2331
2332	////////////////////////////////////////
2333	int _sys_nic_start( unsigned int is_rx )
2334	{
2335	unsigned int trdid = _get_context_slot( CTX_TRDID_ID );
2336
2337	unsigned int nic_channel;
2338	unsigned int cma_channel;
2339
2340	// get NIC channel index and CMA channel index from thread context
2341	if ( is_rx )
2342	{
2343	nic_channel = _get_context_slot( CTX_NIC_RX_ID );
2344	cma_channel = _get_context_slot( CTX_CMA_RX_ID );
2345	}
2346	else
2347	{
2348	nic_channel = _get_context_slot( CTX_NIC_TX_ID );
2349	cma_channel = _get_context_slot( CTX_CMA_TX_ID );
2350	}
2351
2352	#if GIET_DEBUG_NIC
2353	_printf("\n[DEBUG NIC] _sys_nic_start() at cycle %d\n"
2354	"thread %x enter / NIC channel = %d / CMA channel = %d\n",
2355	_get_proctime() , trdid , nic_channel, cma_channel );
2356	#endif
2357
2358	// check NIC and CMA channels index
2359	if ( nic_channel >= NB_NIC_CHANNELS )
2360	{
2361	_printf("\n[GIET_ERROR] in _sys_nic_start() : "
2362	"illegal NIC channel for thread %x\n", trdid );
2363	return -1111;
2364	}
2365	if ( cma_channel >= NB_CMA_CHANNELS )
2366	{
2367	_printf("\n[GIET_ERROR] in _sys_nic_start() : "
2368	"illegal CMA channel for thread %x\n", trdid );
2369	return -1111;
2370	}
2371
2372	// start CMA transfer
2373	_cma_set_register( cma_channel, CHBUF_BUF_SIZE , NIC_CONTAINER_SIZE );
2374	_cma_set_register( cma_channel, CHBUF_PERIOD , 0 ); // OUT_OF_ORDER
2375	_cma_set_register( cma_channel, CHBUF_RUN , 1 );
2376
2377	// activates NIC channel
2378	_nic_channel_start( nic_channel, is_rx, GIET_NIC_MAC4, GIET_NIC_MAC2 );
2379
2380	#if GIET_DEBUG_NIC
2381	_printf("\n[DEBUG NIC] _sys_nic_start() at cycle %d\n"
2382	"thread %d exit\n",
2383	_get_proctime() , trdid );
2384	#endif
2385
2386	return SYSCALL_OK;
2387	} // end _sys_nic_start()
2388
2389
2390	//////////////////////////////////////
2391	int _sys_nic_move( unsigned int is_rx,
2392	void* buffer )
2393	{
2394	unsigned int trdid = _get_context_slot( CTX_TRDID_ID );
2395
2396	unsigned int channel;
2397
2398	#if GIET_DEBUG_NIC
2399	_printf("\n[DEBUG NIC] _sys_nic_move() at cycle %d\n",
2400	"thread %x enters\n",
2401	_get_proctime() , trdid );
2402	#endif
2403
2404	// get NIC channel index from thread context
2405	if ( is_rx ) channel = _get_context_slot( CTX_NIC_RX_ID );
2406	else channel = _get_context_slot( CTX_NIC_TX_ID );
2407
2408	// check NIC channel index
2409	if ( channel >= NB_NIC_CHANNELS )
2410	{
2411	_printf("\n[GIET_ERROR] in _sys_nic_move() : "
2412	"NIC channel non allocated for thread %x\n", trdid );
2413
2414	return SYSCALL_CHANNEL_NON_ALLOCATED;
2415	}
2416
2417	// get kernel chbuf virtual address
2418	ker_chbuf_t* ker_chbuf;
2419	if ( is_rx ) ker_chbuf = &_nic_ker_rx_chbuf[channel];
2420	else ker_chbuf = &_nic_ker_tx_chbuf[channel];
2421
2422	// get xmax / ymax parameters
2423	unsigned int xmax = ker_chbuf->xmax;
2424	unsigned int ymax = ker_chbuf->ymax;
2425
2426	// get cluster coordinates for the processor running the calling thread
2427	unsigned int procid = _get_procid();
2428	unsigned int cx = procid >> (Y_WIDTH + P_WIDTH);
2429	unsigned int cy = (procid >> P_WIDTH) & ((1<<Y_WIDTH)-1);
2430
2431	// check processor coordinates / (xmax,ymax)
2432	if ( (cx >= xmax) \|\| (cy >= ymax) )
2433	{
2434	_printf("\n[GIET_ERROR] in _sys_nic_move(): "
2435	"processor coordinates [%d,%d] larger than (xmax,ymax) = [%d,%d]\n",
2436	cx , cy , xmax , ymax );
2437
2438	return SYSCALL_ILLEGAL_XY_ARGUMENTS;
2439	}
2440
2441	unsigned long long usr_buf_paddr; // user buffer physical address
2442	unsigned long long ker_buf_paddr; // kernel buffer physical address
2443	unsigned long long ker_sts_paddr; // kernel buffer status physical address
2444	unsigned long long ker_buf_desc; // kernel buffer descriptor
2445	unsigned int ker_sts; // kernel buffer status (full or empty)
2446	unsigned int index; // kernel buffer index in chbuf
2447	unsigned int flags; // for _v2P_translate
2448
2449	// Compute user buffer physical address and check access rights
2450	usr_buf_paddr = _v2p_translate( (unsigned int)buffer , &flags );
2451
2452	if ( (flags & PTE_U) == 0 )
2453	{
2454	_printf("\n[GIET ERROR] in _sys_nic_tx_move() : "
2455	"buffer address non user accessible\n");
2456
2457	return SYSCALL_ADDRESS_NON_USER_ACCESSIBLE;
2458	}
2459
2460	#if GIET_DEBUG_NIC
2461	_printf("\n[DEBUG NIC] _sys_nic_move() at cycle %d\n"
2462	"thread %x get user buffer : paddr = %l\n",
2463	_get_proctime() , trdid , usr_buf_paddr );
2464	#endif
2465
2466	// compute buffer index, buffer descriptor paddr and buffer status paddr
2467	index = (ymax * cx) + cy;
2468	ker_buf_desc = ker_chbuf->buf_desc[index];
2469	ker_sts_paddr = ((ker_buf_desc & 0xFFF0000000000000ULL) >> 20) +
2470	((ker_buf_desc & 0x3FFFFFFULL) << 6);
2471
2472	#if GIET_DEBUG_NIC
2473	_printf("\n[DEBUG NIC] _sys_nic_move() at cycle %d\n"
2474	"thread %x get ker_buf_desc %d / paddr = %l\n",
2475	_get_proctime(), trdid , index , ker_buf_desc );
2476	#endif
2477
2478	// poll local kernel container status until success
2479	while ( 1 )
2480	{
2481	// inval buffer descriptor in L2 before read in L2
2482	_mmc_inval( ker_sts_paddr, 4 );
2483	ker_sts = _physical_read( ker_sts_paddr );
2484
2485	#if GIET_DEBUG_NIC
2486	_printf("\n[DEBUG NIC] _sys_nic_move() at cycle %d\n"
2487	"thread %x get status %d / paddr = %l / status = %x\n",
2488	_get_proctime() , trdid , index , ker_sts_paddr, ker_sts );
2489	#endif
2490
2491	// test buffer status and break if found
2492	if ( ( is_rx != 0 ) && ( ker_sts == 0x1 ) ) break;
2493	if ( ( is_rx == 0 ) && ( ker_sts == 0 ) ) break;
2494	}
2495
2496	// compute kernel buffer physical address
2497	ker_buf_paddr = (ker_buf_desc & 0xFFFFFFFFFC000000ULL) >> 20;
2498
2499	// move one container
2500	if ( is_rx ) // RX transfer
2501	{
2502	// inval kernel buffer in L2 before read in L2
2503	_mmc_inval( ker_buf_paddr, NIC_CONTAINER_SIZE );
2504
2505	// transfer data from kernel buffer to user buffer
2506	_physical_memcpy( usr_buf_paddr,
2507	ker_buf_paddr,
2508	NIC_CONTAINER_SIZE );
2509	#if GIET_DEBUG_NIC
2510	_printf("\n[DEBUG NIC] _sys_nic_move() at cycle %d\n"
2511	"thread %x transfer kernel buffer %l to user buffer %l\n",
2512	_get_proctime() , trdid , ker_buf_paddr , usr_buf_paddr );
2513	#endif
2514
2515	}
2516	else // TX transfer
2517	{
2518	// transfer data from user buffer to kernel buffer
2519	_physical_memcpy( ker_buf_paddr,
2520	usr_buf_paddr,
2521	NIC_CONTAINER_SIZE );
2522
2523	// sync kernel buffer in L2 after write in L2
2524	_mmc_sync( ker_buf_paddr, NIC_CONTAINER_SIZE );
2525
2526	#if GIET_DEBUG_NIC
2527	_printf("\n[DEBUG NIC] _sys_nic_move() at cycle %d\n"
2528	"thread %x transfer user buffer %l to kernel buffer %l\n",
2529	_get_proctime() , trdid , usr_buf_paddr , ker_buf_paddr );
2530	#endif
2531
2532	}
2533
2534	// update kernel chbuf status
2535	if ( is_rx ) _physical_write ( ker_sts_paddr, 0 );
2536	else _physical_write ( ker_sts_paddr, 0x1 );
2537
2538	// sync kernel chbuf in L2 after write in L2
2539	_mmc_sync( ker_sts_paddr, 4 );
2540
2541	#if GIET_DEBUG_NIC
2542	_printf("\n[DEBUG NIC] _sys_nic_move() at cycle %d\n"
2543	"thread %x exit\n",
2544	_get_proctime() , trdid );
2545	#endif
2546
2547	return SYSCALL_OK;
2548	} // end _sys_nic_move()
2549
2550
2551	///////////////////////////////////////
2552	int _sys_nic_stop( unsigned int is_rx )
2553	{
2554	unsigned int trdid = _get_context_slot( CTX_TRDID_ID );
2555
2556	unsigned int nic_channel;
2557	unsigned int cma_channel;
2558
2559	// get NIC channel index and CMA channel index
2560	if ( is_rx )
2561	{
2562	nic_channel = _get_context_slot( CTX_NIC_RX_ID );
2563	cma_channel = _get_context_slot( CTX_CMA_RX_ID );
2564	}
2565	else
2566	{
2567	nic_channel = _get_context_slot( CTX_NIC_TX_ID );
2568	cma_channel = _get_context_slot( CTX_CMA_TX_ID );
2569	}
2570
2571	// check NIC and CMA channels index
2572	if ( nic_channel >= NB_NIC_CHANNELS )
2573	{
2574	_printf("\n[GIET_ERROR] in _sys_nic_stop() : "
2575	"NIC channel non allocated for thread %x\n", trdid );
2576
2577	return SYSCALL_CHANNEL_NON_ALLOCATED;
2578	}
2579	if ( cma_channel >= NB_CMA_CHANNELS )
2580	{
2581	_printf("\n[GIET_ERROR] in _sys_nic_stop() : "
2582	"CMA channel non allocated for thread %x\n", trdid );
2583
2584	return SYSCALL_CHANNEL_NON_ALLOCATED;
2585	}
2586
2587	// desactivates the CMA channel
2588	_cma_set_register( cma_channel, CHBUF_RUN , 0 );
2589
2590	// wait until CMA channel IDLE
2591	unsigned int volatile status;
2592	do
2593	{
2594	status = _cma_get_register( cma_channel, CHBUF_STATUS );
2595	}
2596	while ( status );
2597
2598	// desactivates the NIC channel
2599	_nic_channel_stop( nic_channel, is_rx );
2600
2601	return SYSCALL_OK;
2602	} // end _sys_nic_stop()
2603
2604	////////////////////////////////////////
2605	int _sys_nic_clear( unsigned int is_rx )
2606	{
2607	unsigned int trdid = _get_context_slot( CTX_TRDID_ID );
2608
2609	unsigned int channel;
2610
2611	// get NIC channel
2612	if ( is_rx ) channel = _get_context_slot( CTX_NIC_RX_ID );
2613	else channel = _get_context_slot( CTX_NIC_TX_ID );
2614
2615	if ( channel >= NB_NIC_CHANNELS )
2616	{
2617	_printf("\n[GIET_ERROR] in _sys_nic_clear() : "
2618	"NIC channel non allocated for thread %x\n", trdid );
2619
2620	return SYSCALL_CHANNEL_NON_ALLOCATED;
2621	}
2622
2623	if ( is_rx )
2624	{
2625	_nic_set_global_register( NIC_G_NPKT_RX_G2S_RECEIVED , 0 );
2626	_nic_set_global_register( NIC_G_NPKT_RX_DES_TOO_SMALL , 0 );
2627	_nic_set_global_register( NIC_G_NPKT_RX_DES_TOO_BIG , 0 );
2628	_nic_set_global_register( NIC_G_NPKT_RX_DES_MFIFO_FULL , 0 );
2629	_nic_set_global_register( NIC_G_NPKT_RX_DES_CRC_FAIL , 0 );
2630	_nic_set_global_register( NIC_G_NPKT_RX_DISPATCH_RECEIVED , 0 );
2631	_nic_set_global_register( NIC_G_NPKT_RX_DISPATCH_BROADCAST , 0 );
2632	_nic_set_global_register( NIC_G_NPKT_RX_DISPATCH_DST_FAIL , 0 );
2633	_nic_set_global_register( NIC_G_NPKT_RX_DISPATCH_CH_FULL , 0 );
2634	}
2635	else
2636	{
2637	_nic_set_global_register( NIC_G_NPKT_TX_DISPATCH_RECEIVED , 0 );
2638	_nic_set_global_register( NIC_G_NPKT_TX_DISPATCH_TRANSMIT , 0 );
2639	_nic_set_global_register( NIC_G_NPKT_TX_DISPATCH_TOO_BIG , 0 );
2640	_nic_set_global_register( NIC_G_NPKT_TX_DISPATCH_TOO_SMALL , 0 );
2641	_nic_set_global_register( NIC_G_NPKT_TX_DISPATCH_SRC_FAIL , 0 );
2642	_nic_set_global_register( NIC_G_NPKT_TX_DISPATCH_BYPASS , 0 );
2643	_nic_set_global_register( NIC_G_NPKT_TX_DISPATCH_BROADCAST , 0 );
2644	}
2645	return SYSCALL_OK;
2646	} // en _sys_nic_clear()
2647
2648	////////////////////////////////////////
2649	int _sys_nic_stats( unsigned int is_rx )
2650	{
2651	unsigned int trdid = _get_context_slot( CTX_TRDID_ID );
2652
2653	unsigned int nic_channel;
2654
2655	// get NIC channel
2656	if ( is_rx ) nic_channel = _get_context_slot( CTX_NIC_RX_ID );
2657	else nic_channel = _get_context_slot( CTX_NIC_TX_ID );
2658
2659	if ( nic_channel >= NB_NIC_CHANNELS )
2660	{
2661	_printf("\n[GIET_ERROR] in _sys_nic_stats() : "
2662	"NIC channel non allocated for thread %x\n", trdid );
2663
2664	return SYSCALL_CHANNEL_NON_ALLOCATED;
2665	}
2666
2667	if ( is_rx )
2668	{
2669	unsigned int received = _nic_get_global_register( NIC_G_NPKT_RX_G2S_RECEIVED );
2670	unsigned int too_small = _nic_get_global_register( NIC_G_NPKT_RX_DES_TOO_SMALL );
2671	unsigned int too_big = _nic_get_global_register( NIC_G_NPKT_RX_DES_TOO_BIG );
2672	unsigned int fifo_full = _nic_get_global_register( NIC_G_NPKT_RX_DES_MFIFO_FULL );
2673	unsigned int crc_fail = _nic_get_global_register( NIC_G_NPKT_RX_DES_CRC_FAIL );
2674	unsigned int broadcast = _nic_get_global_register( NIC_G_NPKT_RX_DISPATCH_BROADCAST );
2675	unsigned int dst_fail = _nic_get_global_register( NIC_G_NPKT_RX_DISPATCH_DST_FAIL );
2676	unsigned int ch_full = _nic_get_global_register( NIC_G_NPKT_RX_DISPATCH_CH_FULL );
2677
2678	_printf("\n### Network Controller RX Statistics ###\n"
2679	"- packets received : %d\n"
2680	"- too small : %d\n"
2681	"- too big : %d\n"
2682	"- fifo full : %d\n"
2683	"- crc fail : %d\n"
2684	"- dst mac fail : %d\n"
2685	"- channel full : %d\n"
2686	"- broadcast : %d\n",
2687	received,
2688	too_small,
2689	too_big,
2690	fifo_full,
2691	crc_fail,
2692	dst_fail,
2693	ch_full,
2694	broadcast );
2695	}
2696	else
2697	{
2698	unsigned int received = _nic_get_global_register( NIC_G_NPKT_TX_DISPATCH_RECEIVED );
2699	unsigned int too_big = _nic_get_global_register( NIC_G_NPKT_TX_DISPATCH_TOO_BIG );
2700	unsigned int too_small = _nic_get_global_register( NIC_G_NPKT_TX_DISPATCH_TOO_SMALL );
2701	unsigned int src_fail = _nic_get_global_register( NIC_G_NPKT_TX_DISPATCH_SRC_FAIL );
2702	unsigned int bypass = _nic_get_global_register( NIC_G_NPKT_TX_DISPATCH_BYPASS );
2703	unsigned int broadcast = _nic_get_global_register( NIC_G_NPKT_TX_DISPATCH_BROADCAST );
2704
2705	_printf("\n### Network Controller TX Statistics ###\n"
2706	"- packets received : %d\n"
2707	"- too small : %d\n"
2708	"- too big : %d\n"
2709	"- src mac fail : %d\n"
2710	"- bypass : %d\n"
2711	"- broadcast : %d\n",
2712	received,
2713	too_big,
2714	too_small,
2715	src_fail,
2716	bypass,
2717	broadcast );
2718	}
2719	return SYSCALL_OK;
2720	} // end _sys_nic_stats()
2721
2722	#endif
2723
2724	/////////////////////////////////////////////////////////////////////////////////////////
2725	// FBF related syscall handlers
2726	/////////////////////////////////////////////////////////////////////////////////////////
2727
2728	//////////////////////////////////////
2729	int _sys_fbf_size( unsigned int* width,
2730	unsigned int* height )
2731	{
2732	if ( USE_FBF == 0 )
2733	{
2734	*width = 0;
2735	*height = 0;
2736	}
2737	else
2738	{
2739	*width = FBUF_X_SIZE;
2740	*height = FBUF_Y_SIZE;
2741	}
2742
2743	return SYSCALL_OK;
2744	}
2745
2746	////////////////////
2747	int _sys_fbf_alloc()
2748	{
2749	mapping_header_t header = (mapping_header_t )SEG_BOOT_MAPPING_BASE;
2750	mapping_vspace_t *vspace = _get_vspace_base(header);
2751	mapping_thread_t *thread = _get_thread_base(header);
2752
2753	// compute number of users
2754	unsigned int vsid = _get_context_slot(CTX_VSID_ID);
2755	unsigned int users = vspace[vsid].threads;
2756
2757	// access FBF allocator
2758	// register it in all threads contexts
2759	if ( _atomic_test_and_set( &_fbf_alloc , users ) == 0 ) // FBF available
2760	{
2761	unsigned int min = vspace[vsid].thread_offset;
2762	unsigned int max = min + users;
2763	unsigned int tid;
2764	for ( tid = min ; tid < max ; tid++ )
2765	{
2766	unsigned int y_size = header->y_size;
2767	unsigned int cid = thread[tid].clusterid;
2768	unsigned int x = cid / y_size;
2769	unsigned int y = cid % y_size;
2770	unsigned int p = thread[tid].proclocid;
2771	unsigned int ltid = thread[tid].ltid;
2772	static_scheduler_t* psched = (static_scheduler_t*)_schedulers[x][y][p];
2773	_atomic_or( &psched->context[ltid].slot[CTX_LOCKS_ID] , LOCKS_MASK_FBF );
2774	}
2775	return SYSCALL_OK;
2776	}
2777	else // FBF already allocated
2778	{
2779	return SYSCALL_SHARED_PERIPHERAL_BUSY;
2780	}
2781	}
2782
2783	//////////////////////
2784	int _sys_fbf_release() // not a syscall: used by _ctx_kill_thread()
2785	{
2786	// get calling thread scheduler, ltid and trdid
2787	static_scheduler_t* psched = _get_sched();
2788	unsigned int ltid = _get_thread_ltid();
2789	unsigned int trdid = _get_thread_trdid();
2790
2791	if ( (psched->context[ltid].slot[CTX_LOCKS_ID] & LOCKS_MASK_FBF) == 0 )
2792	{
2793	_printf("\n[GIET ERROR] in _sys_fbf_release() : "
2794	"FBF not allocated to thread %x\n", trdid );
2795
2796	return SYSCALL_CHANNEL_NON_ALLOCATED;
2797	}
2798
2799	// decrement FBF allocator
2800	// reset the calling thread context
2801	_atomic_increment( &_fbf_alloc , 0xFFFFFFFF );
2802	_atomic_and( &psched->context[ltid].slot[CTX_LOCKS_ID] , ~LOCKS_MASK_FBF );
2803
2804	return SYSCALL_OK;
2805	}
2806
2807	/////////////////////////////////////////////
2808	int _sys_fbf_sync_write( unsigned int offset,
2809	void* buffer,
2810	unsigned int length )
2811	{
2812	// get calling thread scheduler, ltid and trdid
2813	static_scheduler_t* psched = _get_sched();
2814	unsigned int ltid = _get_thread_ltid();
2815	unsigned int trdid = _get_thread_trdid();
2816
2817	if ( (psched->context[ltid].slot[CTX_LOCKS_ID] & LOCKS_MASK_FBF) == 0 )
2818	{
2819	_printf("\n[GIET ERROR] in _sys_fbf_release() : "
2820	"FBF not allocated to thread %x\n", trdid );
2821
2822	return SYSCALL_CHANNEL_NON_ALLOCATED;
2823	}
2824
2825	char* fbf_address = (char *)SEG_FBF_BASE + offset;
2826	memcpy( fbf_address, buffer, length);
2827
2828	return SYSCALL_OK;
2829	}
2830
2831	/////////////////////////////////////////////
2832	int _sys_fbf_sync_read( unsigned int offset,
2833	void* buffer,
2834	unsigned int length )
2835	{
2836	// get calling thread scheduler, ltid and trdid
2837	static_scheduler_t* psched = _get_sched();
2838	unsigned int ltid = _get_thread_ltid();
2839	unsigned int trdid = _get_thread_trdid();
2840
2841	if ( (psched->context[ltid].slot[CTX_LOCKS_ID] & LOCKS_MASK_FBF) == 0 )
2842	{
2843	_printf("\n[GIET ERROR] in _sys_fbf_release() : "
2844	"FBF not allocated to thread %x\n", trdid );
2845
2846	return SYSCALL_CHANNEL_NON_ALLOCATED;
2847	}
2848
2849	char* fbf_address = (char *)SEG_FBF_BASE + offset;
2850	memcpy( buffer, fbf_address, length);
2851
2852	return SYSCALL_OK;
2853	}
2854
2855	////////////////////////
2856	int _sys_fbf_cma_alloc()
2857	{
2858	unsigned int trdid = _get_thread_trdid();
2859
2860	if ( _get_context_slot( CTX_CMA_FB_ID ) < NB_CMA_CHANNELS )
2861	{
2862	_printf("\n[GIET ERROR] in _sys_fbf_cma_alloc() : "
2863	"CMA channel already allocated for thread %x\n", trdid );
2864
2865	return SYSCALL_CHANNEL_ALREADY_ALLOCATED;
2866	}
2867
2868	// get a CMA channel
2869	unsigned int channel;
2870	for ( channel = 0 ; channel < NB_CMA_CHANNELS ; channel++ )
2871	{
2872	unsigned int* palloc = &_cma_channel_alloc[channel];
2873	if ( _atomic_test_and_set( palloc , 1 ) == 0 ) break;
2874	}
2875	if ( channel >= NB_CMA_CHANNELS )
2876	{
2877	_printf("\n[GIET ERROR] in _sys_fbf_cma_alloc() : no CMA channel available\n");
2878
2879	return SYSCALL_NO_CHANNEL_AVAILABLE;
2880	}
2881	else
2882	{
2883	_set_context_slot( CTX_CMA_FB_ID, channel );
2884
2885	return SYSCALL_OK;
2886	}
2887	} // end sys_fbf_cma_alloc()
2888
2889	//////////////////////////
2890	int _sys_fbf_cma_release() // Not a syscall
2891	{
2892	unsigned int channel = _get_context_slot( CTX_CMA_FB_ID );
2893	unsigned int trdid = _get_thread_trdid();
2894
2895	if ( channel >= NB_CMA_CHANNELS )
2896	{
2897	_printf("\n[GIET_ERROR] in _sys_fbf_cma_release() : "
2898	"CMA_FB channel already released for thread %x\n", trdid );
2899
2900	return SYSCALL_CHANNEL_NON_ALLOCATED;
2901	}
2902
2903	// stop CMA transfer
2904	_sys_fbf_cma_stop();
2905
2906	// reset CTX_CMA_FB_ID for thread
2907	_set_context_slot( CTX_CMA_FB_ID, 0xFFFFFFFF );
2908
2909	// release CMA channel
2910	_cma_channel_alloc[channel] = 0;
2911
2912	return SYSCALL_OK;
2913	}
2914
2915	///////////////////////////////////////////////////
2916	int _sys_fbf_cma_init_buf( void* buf0_vbase,
2917	void* buf1_vbase,
2918	void* sts0_vaddr,
2919	void* sts1_vaddr )
2920	{
2921	unsigned int vaddr; // virtual address
2922	unsigned int flags; // for _v2p_translate()
2923	unsigned long long fbf_paddr; // fbf physical address
2924	unsigned long long fbf_sts_paddr; // fbf status physical address
2925	unsigned long long buf0_pbase; // buffer 0 base physical address
2926	unsigned long long sts0_paddr; // buffer 0 status physical address
2927	unsigned long long buf1_pbase; // buffer 1 base physical address
2928	unsigned long long sts1_paddr; // buffer 1 status physical address
2929
2930	// get calling thread scheduler, ltid and trdid
2931	static_scheduler_t* psched = _get_sched();
2932	unsigned int ltid = _get_thread_ltid();
2933	unsigned int trdid = _get_thread_trdid();
2934
2935	// check FBF allocated
2936	if ( (psched->context[ltid].slot[CTX_LOCKS_ID] & LOCKS_MASK_FBF) == 0 )
2937	{
2938	_printf("\n[GIET ERROR] in _sys_fbf_cma_init_buf() : "
2939	"FBF not allocated to thread %x\n", trdid );
2940
2941	return SYSCALL_CHANNEL_NON_ALLOCATED;
2942	}
2943
2944	// get channel index
2945	unsigned int channel = _get_context_slot( CTX_CMA_FB_ID );
2946
2947	if ( channel >= NB_CMA_CHANNELS )
2948	{
2949	_printf("\n[GIET ERROR] in _sys_fbf_cma_init_buf() : "
2950	"CMA channel non allocated to thread %x\n", trdid );
2951
2952	return SYSCALL_CHANNEL_NON_ALLOCATED;
2953	}
2954
2955	#if GIET_DEBUG_FBF_CMA
2956	_printf("\n[FBF_CMA DEBUG] _sys_fbf_cma_init_buf()\n"
2957	" - channel = %d\n"
2958	" - buf0 vbase = %x\n"
2959	" - buf1 vbase = %x\n"
2960	" - sts0 vaddr = %x\n"
2961	" - sts1 vaddr = %x\n",
2962	channel,
2963	(unsigned int)buf0_vbase,
2964	(unsigned int)buf1_vbase,
2965	(unsigned int)sts0_vaddr,
2966	(unsigned int)sts1_vaddr );
2967	#endif
2968
2969	// checking user buffers virtual addresses alignment
2970	if ( ((unsigned int)buf0_vbase & 0x3F) \|\|
2971	((unsigned int)buf1_vbase & 0x3F) )
2972	{
2973	_printf("\n[GIET ERROR] in _sys_fbf_cma_init_buf() : "
2974	"user buffer not aligned for thread %x\n", trdid );
2975
2976	return SYSCALL_ADDRESS_NON_ALIGNED;
2977	}
2978
2979	// checking user buffers status virtual addresses alignment
2980	if ( ((unsigned int)sts0_vaddr & 0x3F) \|\|
2981	((unsigned int)sts1_vaddr & 0x3F) )
2982	{
2983	_printf("\n[GIET ERROR] in _sys_fbf_cma_init_buf() : "
2984	"user status not aligned for thread %x\n", trdid );
2985
2986	return SYSCALL_ADDRESS_NON_ALIGNED;
2987	}
2988
2989	// compute frame buffer physical address and initialize _fbf_chbuf[channel]
2990	vaddr = (unsigned int)SEG_FBF_BASE;
2991	fbf_paddr = _v2p_translate( vaddr , &flags );
2992	vaddr = (unsigned int)&_fbf_status[channel];
2993	fbf_sts_paddr = _v2p_translate( vaddr , &flags );
2994
2995	_fbf_chbuf[channel].fbf_desc =
2996	(unsigned long long) ((fbf_sts_paddr & 0xFFFFFFFFULL) >> 6) +
2997	(((fbf_paddr & 0xFFFFFFFFULL) >> 6 ) << 26);
2998
2999	// Compute user buffer 0 physical addresses and intialize _fbf_chbuf[channel]
3000	vaddr = (unsigned int)buf0_vbase;
3001	buf0_pbase = _v2p_translate( vaddr , &flags );
3002	if ((flags & PTE_U) == 0)
3003	{
3004	_printf("\n[GIET ERROR] in _sys_fbf_cma_init_buf() : "
3005	"buf0 not in user space for thread %x\n", trdid );
3006
3007	return SYSCALL_ADDRESS_NON_USER_ACCESSIBLE;
3008	}
3009
3010	vaddr = (unsigned int)sts0_vaddr;
3011	sts0_paddr = _v2p_translate( vaddr , &flags );
3012	if ((flags & PTE_U) == 0)
3013	{
3014	_printf("\n[GIET ERROR] in _sys_fbf_cma_init_buf() : "
3015	"sts0 not in user space for thread %x\n", trdid);
3016
3017	return SYSCALL_ADDRESS_NON_USER_ACCESSIBLE;
3018	}
3019
3020	_fbf_chbuf[channel].buf0_desc =
3021	(unsigned long long) ((sts0_paddr & 0xFFFFFFFFULL) >> 6) +
3022	(((buf0_pbase & 0xFFFFFFFFULL) >> 6 ) << 26);
3023
3024	// Compute user buffer 1 physical addresses and intialize _fbf_chbuf[channel]
3025	vaddr = (unsigned int)buf1_vbase;
3026	buf1_pbase = _v2p_translate( vaddr , &flags );
3027	if ((flags & PTE_U) == 0)
3028	{
3029	_printf("\n[GIET ERROR] in _sys_fbf_cma_init_buf() : "
3030	"buf1 not in user space for thread %x\n", trdid );
3031
3032	return SYSCALL_ADDRESS_NON_USER_ACCESSIBLE;
3033	}
3034
3035	vaddr = (unsigned int)sts1_vaddr;
3036	sts1_paddr = _v2p_translate( vaddr , &flags );
3037	if ((flags & PTE_U) == 0)
3038	{
3039	_printf("\n[GIET ERROR] in _sys_fbf_cma_init_buf() : "
3040	"sts1 not in user space for thread %x\n", trdid);
3041
3042	return SYSCALL_ADDRESS_NON_USER_ACCESSIBLE;
3043	}
3044
3045	_fbf_chbuf[channel].buf1_desc =
3046	(unsigned long long) ((sts1_paddr & 0xFFFFFFFFULL) >> 6) +
3047	(((buf1_pbase & 0xFFFFFFFFULL) >> 6 ) << 26);
3048
3049	// Compute and register physical adress of the fbf_chbuf descriptor
3050	vaddr = (unsigned int)&_fbf_chbuf[channel];
3051	_fbf_chbuf_paddr[channel] = _v2p_translate( vaddr , &flags );
3052
3053	#if GIET_DEBUG_FBF_CMA
3054	_printf(" - fbf pbase = %l\n"
3055	" - fbf status paddr = %l\n"
3056	" - buf0 pbase = %l\n"
3057	" - buf0 status paddr = %l\n"
3058	" - buf1 pbase = %l\n"
3059	" - buf0 status paddr = %l\n"
3060	" - chbuf pbase = %l\n",
3061	fbf_paddr,
3062	fbf_sts_paddr,
3063	buf0_pbase,
3064	sts0_paddr,
3065	buf1_pbase,
3066	sts1_paddr,
3067	_fbf_chbuf_paddr[channel] );
3068	#endif
3069
3070	return SYSCALL_OK;
3071
3072	} // end sys_fbf_cma_init_buf()
3073
3074	////////////////////////////////////////////
3075	int _sys_fbf_cma_start( unsigned int length )
3076	{
3077	// get calling thread scheduler, ltid and trdid
3078	static_scheduler_t* psched = _get_sched();
3079	unsigned int ltid = _get_thread_ltid();
3080	unsigned int trdid = _get_thread_trdid();
3081
3082	// check FBF allocated
3083	if ( (psched->context[ltid].slot[CTX_LOCKS_ID] & LOCKS_MASK_FBF) == 0 )
3084	{
3085	_printf("\n[GIET ERROR] in _sys_fbf_release() : "
3086	"FBF not allocated to thread %x\n", trdid );
3087
3088	return SYSCALL_CHANNEL_NON_ALLOCATED;
3089	}
3090
3091	// get channel index
3092	unsigned int channel = _get_context_slot( CTX_CMA_FB_ID );
3093
3094	if ( channel >= NB_CMA_CHANNELS )
3095	{
3096	_printf("\n[GIET ERROR] in _fbf_cma_start() : "
3097	"CMA channel non allocated\n");
3098
3099	return SYSCALL_CHANNEL_NON_ALLOCATED;
3100	}
3101
3102	// check buffers initialization
3103	if ( ( _fbf_chbuf[channel].buf0_desc == 0x0ULL ) &&
3104	( _fbf_chbuf[channel].buf1_desc == 0x0ULL) &&
3105	( _fbf_chbuf[channel].fbf_desc == 0x0ULL) )
3106	{
3107	_printf("\n[GIET ERROR] in _sys_fbf_cma_start(): initialization not done\n");
3108
3109	return SYSCALL_MISSING_INITIALISATION;
3110	}
3111
3112	// initializes buffer length
3113	_fbf_chbuf[channel].length = length;
3114
3115	if ( USE_IOB )
3116	{
3117	// SYNC request for fbf_chbuf descriptor
3118	_mmc_sync( _fbf_chbuf_paddr[channel] , sizeof( fbf_chbuf_t ) );
3119	}
3120
3121	// start CMA transfer
3122	unsigned long long paddr = _fbf_chbuf_paddr[channel];
3123	unsigned int src_chbuf_paddr_lsb = (unsigned int)(paddr & 0xFFFFFFFF);
3124	unsigned int src_chbuf_paddr_ext = (unsigned int)(paddr >> 32);
3125	unsigned int dst_chbuf_paddr_lsb = src_chbuf_paddr_lsb + 16;
3126	unsigned int dst_chbuf_paddr_ext = src_chbuf_paddr_ext;
3127
3128	_cma_set_register( channel, CHBUF_SRC_DESC , src_chbuf_paddr_lsb );
3129	_cma_set_register( channel, CHBUF_SRC_EXT , src_chbuf_paddr_ext );
3130	_cma_set_register( channel, CHBUF_SRC_NBUFS, 2 );
3131	_cma_set_register( channel, CHBUF_DST_DESC , dst_chbuf_paddr_lsb );
3132	_cma_set_register( channel, CHBUF_DST_EXT , dst_chbuf_paddr_ext );
3133	_cma_set_register( channel, CHBUF_DST_NBUFS, 1 );
3134	_cma_set_register( channel, CHBUF_BUF_SIZE , length );
3135	_cma_set_register( channel, CHBUF_PERIOD , 300 );
3136	_cma_set_register( channel, CHBUF_RUN , 1 );
3137
3138	return SYSCALL_OK;
3139
3140	} // end _sys_fbf_cma_start()
3141
3142	/////////////////////////////////////////////////////
3143	int _sys_fbf_cma_display( unsigned int buffer_index )
3144	{
3145	volatile unsigned int full = 1;
3146
3147	// get calling thread scheduler, ltid and trdid
3148	static_scheduler_t* psched = _get_sched();
3149	unsigned int ltid = _get_thread_ltid();
3150	unsigned int trdid = _get_thread_trdid();
3151
3152	// check FBF allocated
3153	if ( (psched->context[ltid].slot[CTX_LOCKS_ID] & LOCKS_MASK_FBF) == 0 )
3154	{
3155	_printf("\n[GIET ERROR] in _sys_fbf_release() : "
3156	"FBF not allocated to thread %x\n", trdid );
3157
3158	return SYSCALL_CHANNEL_NON_ALLOCATED;
3159	}
3160
3161	// get channel index
3162	unsigned int channel = _get_context_slot( CTX_CMA_FB_ID );
3163
3164	if ( channel >= NB_CMA_CHANNELS )
3165	{
3166	_printf("\n[GIET ERROR] in _sys_fbf_cma_display() : "
3167	"CMA channel non allocated\n");
3168
3169	return SYSCALL_CHANNEL_NON_ALLOCATED;
3170	}
3171
3172	// get fbf_chbuf descriptor pointer
3173	fbf_chbuf_t* pdesc = &_fbf_chbuf[channel];
3174
3175	#if GIET_DEBUG_FBF_CMA
3176	_printf("\n[FBF_CMA DEBUG] enters _sys_fb_cma_display()\n"
3177	" - cma channel = %d\n"
3178	" - buffer index = %d\n"
3179	" - buf0_desc value = %l\n"
3180	" - buf1_desc value = %l\n"
3181	" - fbf_desc value = %l\n",
3182	channel , buffer_index,
3183	_fbf_chbuf[channel].buf0_desc,
3184	_fbf_chbuf[channel].buf1_desc,
3185	_fbf_chbuf[channel].fbf_desc );
3186	#endif
3187
3188	unsigned long long buf_sts_paddr;
3189	unsigned long long buf_paddr;
3190	unsigned long long fbf_sts_paddr;
3191
3192	if ( buffer_index == 0 ) // user buffer 0
3193	{
3194	buf_sts_paddr =
3195	((pdesc->buf0_desc & 0xFFF0000000000000ULL) >> 20) + // compute address extension
3196	((pdesc->buf0_desc & 0x3FFFFFFULL) << 6); // compute 32 LSB of the address
3197
3198	buf_paddr =
3199	(pdesc->buf0_desc & 0xFFFFFFFFFC000000ULL) >> 20; // compute the entire address
3200	}
3201	else // user buffer 1
3202	{
3203	buf_sts_paddr =
3204	((pdesc->buf1_desc & 0xFFF0000000000000ULL) >> 20) +
3205	((pdesc->buf1_desc & 0x3FFFFFFULL) << 6);
3206
3207	buf_paddr =
3208	(pdesc->buf1_desc & 0xFFFFFFFFFC000000ULL) >> 20;
3209	}
3210
3211	fbf_sts_paddr =
3212	((pdesc->fbf_desc & 0xFFF0000000000000ULL) >> 20) +
3213	((pdesc->fbf_desc & 0x3FFFFFFULL) << 6);
3214
3215	#if GIET_DEBUG_FBF_CMA
3216	_printf(" - fbf status paddr = %l\n"
3217	" - buf pbase = %l\n"
3218	" - buf status paddr = %l\n",
3219	fbf_sts_paddr,
3220	buf_paddr,
3221	buf_sts_paddr );
3222	#endif
3223
3224	// waiting user buffer released by the CMA component)
3225	while ( full )
3226	{
3227	// INVAL L2 cache copy of user buffer status
3228	// because it has been modified in RAM by the CMA component
3229	_mmc_inval( buf_sts_paddr , 4 );
3230
3231	full = _physical_read( buf_sts_paddr );
3232	}
3233
3234	// SYNC request for the user buffer, because
3235	// it will be read from XRAM by the CMA component
3236	_mmc_sync( buf_paddr , pdesc->length );
3237
3238	// set user buffer status
3239	_physical_write( buf_sts_paddr, 0x1 );
3240
3241	// reset fbf buffer status
3242	_physical_write( fbf_sts_paddr, 0x0 );
3243
3244	// SYNC request, because these buffer descriptors
3245	// will be read from XRAM by the CMA component
3246	_mmc_sync( buf_sts_paddr, 4 );
3247	_mmc_sync( fbf_sts_paddr, 4 );
3248
3249	return SYSCALL_OK;
3250
3251	} // end _sys_fbf_cma_display()
3252
3253	///////////////////////
3254	int _sys_fbf_cma_stop()
3255	{
3256	// get channel index
3257	unsigned int channel = _get_context_slot( CTX_CMA_FB_ID );
3258
3259	if ( channel >= NB_CMA_CHANNELS )
3260	{
3261	_printf("\n[GIET ERROR] in _sys_fbf_cma_stop() : CMA channel non allocated\n");
3262
3263	return SYSCALL_CHANNEL_NON_ALLOCATED;
3264	}
3265
3266	// Desactivate CMA channel
3267	_cma_set_register( channel, CHBUF_RUN, 0 );
3268
3269	return SYSCALL_OK;
3270
3271	} // end _sys_fbf_cma_stop()
3272
3273
3274	//////////////////////////////////////////////////////////////////////////////
3275	// Miscelaneous syscall handlers
3276	//////////////////////////////////////////////////////////////////////////////
3277
3278	///////////////
3279	int _sys_ukn()
3280	{
3281	_printf("\n[GIET ERROR] Undefined System Call / EPC = %x\n", _get_epc() );
3282
3283	return SYSCALL_UNDEFINED_SYSTEM_CALL;
3284	}
3285
3286	////////////////////////////////////
3287	int _sys_proc_xyp( unsigned int* x,
3288	unsigned int* y,
3289	unsigned int* p )
3290	{
3291	unsigned int gpid = _get_procid(); // global processor index from CPO register
3292
3293	*x = (gpid >> (Y_WIDTH + P_WIDTH)) & ((1<<X_WIDTH)-1);
3294	*y = (gpid >> P_WIDTH) & ((1<<Y_WIDTH)-1);
3295	*p = gpid & ((1<<P_WIDTH)-1);
3296
3297	return SYSCALL_OK;
3298	}
3299
3300	////////////////////////////////////////////
3301	int _sys_procs_number( unsigned int* x_size,
3302	unsigned int* y_size,
3303	unsigned int* nprocs )
3304	{
3305	mapping_header_t * header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
3306	mapping_cluster_t * cluster = _get_cluster_base(header);
3307
3308	unsigned int x;
3309	unsigned int y;
3310	unsigned int okmin = 1;
3311	unsigned int okmax = 1;
3312
3313	// compute max values
3314	unsigned int xmax = header->x_size;
3315	unsigned int ymax = header->y_size;
3316	unsigned int procs = cluster[0].procs;
3317
3318	// check the (ymax-1) lower rows
3319	for ( y = 0 ; y < ymax-1 ; y++ )
3320	{
3321	for ( x = 0 ; x < xmax ; x++ )
3322	{
3323	if (cluster[x*ymax+y].procs != procs ) okmin = 0;
3324	}
3325	}
3326
3327	// check the upper row
3328	for ( x = 0 ; x < xmax ; x++ )
3329	{
3330	if (cluster[x*ymax+ymax-1].procs != procs ) okmax = 0;
3331	}
3332
3333	// return values
3334	if ( okmin && okmax )
3335	{
3336	*x_size = xmax;
3337	*y_size = ymax;
3338	*nprocs = procs;
3339	}
3340	else if ( okmin )
3341	{
3342	*x_size = xmax;
3343	*y_size = ymax-1;
3344	*nprocs = procs;
3345	}
3346	else
3347	{
3348	*x_size = 0;
3349	*y_size = 0;
3350	*nprocs = 0;
3351	}
3352	return SYSCALL_OK;
3353	}
3354
3355	///////////////////////////////////////////////////////
3356	int _sys_vseg_get_vbase( char* vspace_name,
3357	char* vseg_name,
3358	unsigned int* vbase )
3359	{
3360	mapping_header_t * header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
3361	mapping_vspace_t * vspace = _get_vspace_base(header);
3362	mapping_vseg_t * vseg = _get_vseg_base(header);
3363
3364	unsigned int vspace_id;
3365	unsigned int vseg_id;
3366
3367	// scan vspaces
3368	for (vspace_id = 0; vspace_id < header->vspaces; vspace_id++)
3369	{
3370	if (_strncmp( vspace[vspace_id].name, vspace_name, 31) == 0)
3371	{
3372	// scan vsegs
3373	for (vseg_id = vspace[vspace_id].vseg_offset;
3374	vseg_id < (vspace[vspace_id].vseg_offset + vspace[vspace_id].vsegs);
3375	vseg_id++)
3376	{
3377	if (_strncmp(vseg[vseg_id].name, vseg_name, 31) == 0)
3378	{
3379	*vbase = vseg[vseg_id].vbase;
3380	return SYSCALL_OK;
3381	}
3382	}
3383	}
3384	}
3385	return SYSCALL_VSEG_NOT_FOUND;
3386	}
3387
3388	/////////////////////////////////////////////////////////
3389	int _sys_vseg_get_length( char* vspace_name,
3390	char* vseg_name,
3391	unsigned int* length )
3392	{
3393	mapping_header_t * header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
3394	mapping_vspace_t * vspace = _get_vspace_base(header);
3395	mapping_vseg_t * vseg = _get_vseg_base(header);
3396
3397	unsigned int vspace_id;
3398	unsigned int vseg_id;
3399
3400	// scan vspaces
3401	for (vspace_id = 0; vspace_id < header->vspaces; vspace_id++)
3402	{
3403	if (_strncmp( vspace[vspace_id].name, vspace_name, 31) == 0)
3404	{
3405	// scan vsegs
3406	for (vseg_id = vspace[vspace_id].vseg_offset;
3407	vseg_id < (vspace[vspace_id].vseg_offset + vspace[vspace_id].vsegs);
3408	vseg_id++)
3409	{
3410	if (_strncmp(vseg[vseg_id].name, vseg_name, 31) == 0)
3411	{
3412	*length = vseg[vseg_id].length;
3413	return SYSCALL_OK;
3414	}
3415	}
3416	}
3417	}
3418	return SYSCALL_VSEG_NOT_FOUND;
3419	}
3420
3421	////////////////////////////////////////
3422	int _sys_xy_from_ptr( void* ptr,
3423	unsigned int* x,
3424	unsigned int* y )
3425	{
3426	unsigned int flags;
3427	unsigned long long paddr = _v2p_translate( (unsigned int)ptr , &flags );
3428
3429	*x = (paddr>>36) & 0xF;
3430	*y = (paddr>>32) & 0xF;
3431
3432	return SYSCALL_OK;
3433	}
3434
3435	/////////////////////////////////////////
3436	int _sys_heap_info( unsigned int* vaddr,
3437	unsigned int* length,
3438	unsigned int x,
3439	unsigned int y )
3440	{
3441	// checking parameters
3442	if ( (x >= X_SIZE) \|\| (y >= Y_SIZE) )
3443	{
3444	*vaddr = 0;
3445	*length = 0;
3446	_printf("\n[GIET ERROR] in _sys_heap_info() : "
3447	"illegal (%d,%d) coordinates\n", x , y );
3448	return SYSCALL_ILLEGAL_CLUSTER_COORDINATES;
3449	}
3450
3451	mapping_header_t * header = (mapping_header_t *)SEG_BOOT_MAPPING_BASE;
3452	mapping_thread_t * thread = _get_thread_base(header);
3453	mapping_vseg_t * vseg = _get_vseg_base(header);
3454	mapping_vspace_t * vspace = _get_vspace_base(header);
3455
3456	unsigned int thread_id;
3457	unsigned int vspace_id;
3458	unsigned int vseg_id = 0xFFFFFFFF;
3459
3460	// get calling thread vspace index
3461	vspace_id = _get_context_slot(CTX_VSID_ID);
3462
3463	// scan all threads in vspace to find one in clyster[x,y]
3464	unsigned int min = vspace[vspace_id].thread_offset ;
3465	unsigned int max = min + vspace[vspace_id].threads ;
3466	for ( thread_id = min ; thread_id < max ; thread_id++ )
3467	{
3468	if ( thread[thread_id].clusterid == (x * Y_SIZE + y) )
3469	{
3470	vseg_id = thread[thread_id].heap_vseg_id;
3471	break;
3472	}
3473	}
3474
3475	// analysing the vseg_id
3476	if ( vseg_id != 0xFFFFFFFF )
3477	{
3478	*vaddr = vseg[vseg_id].vbase;
3479	*length = vseg[vseg_id].length;
3480	}
3481	else
3482	{
3483	*vaddr = 0;
3484	*length = 0;
3485	_printf("error in _sys_heap_info() : no heap in cluster (%d,%d)\n", x , y );
3486	}
3487	return SYSCALL_OK;
3488	} // end _sys_heap_info()
3489
3490
3491	// Local Variables:
3492	// tab-width: 4
3493	// c-basic-offset: 4
3494	// c-file-offsets:((innamespace . 0)(inline-open . 0))
3495	// indent-tabs-mode: nil
3496	// End:
3497	// vim: filetype=c:expandtab:shiftwidth=4:tabstop=4:softtabstop=4
3498

Note: See TracBrowser for help on using the repository browser.

Download in other formats: