close Warning: Can't use blame annotator: 
svn blame failed on soft/giet_vm/mappings/1c_4p_40.xml: 195004 - Cannot calculate blame information for binary file 'file:///users/largo2/svn/giet-vm/soft/giet_vm/mappings/1c_4p_40.xml'

source: soft/giet_vm/mappings/1c_4p_40.xml @ 269

Last change on this file since 269 was 248, checked in by cfuguet, 11 years ago

Adding two new mapping info files for the tsar_generic_xbar platform:

  • 1 cluster, 1 processor
  • 1 cluster, 4 processors

The two using 40 bits physical addresses
  • Property svn:mime-type set to application/xml
File size: 14.0 KB
RevLine 
1<?xml version="1.0"?>
2
3<mapping_info signature    = "0xdeadbeef" 
4              name         = "1c_4p_40" 
5              cluster_x    = "1" 
6              cluster_y    = "1" 
7              vspaces      = "4">
8
9*** This first section describes an instance of the "tsar_generic_xbar" architecture
10*** with 1 clusters, 4 processor per cluster and 40 bits physical address.
11
12    <clusterset>
13
14        <cluster index = "0" >
15            <pseg name = "PSEG_RAM"  type = "RAM"  base = "0x0000000000" length = "0x0010000000" />
16
17*** Boot ROM and peripherals
18
19                        <pseg name = "PSEG_XICU" type = "PERI" base = "0x00B0000000" length = "0x0000002000" />
20            <pseg name = "PSEG_DMA"  type = "PERI" base = "0x00B1000000" length = "0x0000008000" />
21            <pseg name = "PSEG_FBF"  type = "PERI" base = "0x00B2000000" length = "0x0000004000" /> 
22            <pseg name = "PSEG_IOC"  type = "PERI" base = "0x00B3000000" length = "0x0000001000" /> 
23            <pseg name = "PSEG_TTY"  type = "PERI" base = "0x00B4000000" length = "0x0000001000" /> 
24            <pseg name = "PSEG_NIC"  type = "PERI" base = "0x00B5000000" length = "0x0000021000" />
25            <pseg name = "PSEG_CMA"  type = "PERI" base = "0x00B6000000" length = "0x0000004000" />
26            <pseg name = "PSEG_IOB"  type = "PERI" base = "0x00BE000000" length = "0x0000100000" />
27            <pseg name = "PSEG_ROM"  type = "ROM"  base = "0x00BFC00000" length = "0x0000100000" />
28
29            <proc index  = "0" >
30                <irq type = "HARD" icuid = "0"  isr = "ISR_SWITCH" /> 
31                <irq type = "HARD" icuid = "8"  isr = "ISR_DMA" channel = "0" /> 
32                <irq type = "HARD" icuid = "16" isr = "ISR_TTY" channel = "0" /> 
33                <irq type = "HARD" icuid = "17" isr = "ISR_TTY" channel = "1" /> 
34                <irq type = "HARD" icuid = "18" isr = "ISR_TTY" channel = "2" /> 
35                <irq type = "HARD" icuid = "19" isr = "ISR_TTY" channel = "3" /> 
36                <irq type = "HARD" icuid = "20" isr = "ISR_TTY" channel = "4" /> 
37                <irq type = "HARD" icuid = "21" isr = "ISR_TTY" channel = "5" /> 
38                <irq type = "HARD" icuid = "22" isr = "ISR_TTY" channel = "6" /> 
39                <irq type = "HARD" icuid = "23" isr = "ISR_TTY" channel = "7" /> 
40                <irq type = "HARD" icuid = "24" isr = "ISR_TTY" channel = "8" /> 
41                <irq type = "HARD" icuid = "25" isr = "ISR_TTY" channel = "9" />
42                <irq type = "HARD" icuid = "26" isr = "ISR_TTY" channel = "10" /> 
43                <irq type = "HARD" icuid = "27" isr = "ISR_TTY" channel = "11" /> 
44                <irq type = "HARD" icuid = "28" isr = "ISR_TTY" channel = "12" /> 
45                <irq type = "HARD" icuid = "29" isr = "ISR_TTY" channel = "13" /> 
46                <irq type = "HARD" icuid = "30" isr = "ISR_TTY" channel = "14" /> 
47                <irq type = "HARD" icuid = "31" isr = "ISR_IOC" /> 
48            </proc> 
49
50            <proc index = "1" >
51                <irq type = "PTI"  icuid = "1" isr = "ISR_SWITCH" />
52            </proc>
53
54            <proc index = "2" >
55                <irq type = "PTI"  icuid = "2" isr = "ISR_SWITCH" />
56            </proc>
57
58            <proc index  = "3" >
59                <irq type = "PTI"  icuid = "3" isr = "ISR_SWITCH" />
60            </proc>
61
62            <periph type = "DMA"  psegname = "PSEG_DMA"  channels = "4" /> 
63            <periph type = "XICU" psegname = "PSEG_XICU" channels = "18" />
64            <periph type = "IOC"  psegname = "PSEG_IOC"  channels = "1" /> 
65            <periph type = "TTY"  psegname = "PSEG_TTY"  channels = "8" /> 
66            <periph type = "NIC"  psegname = "PSEG_NIC"  channels = "2" />
67            <periph type = "FBF"  psegname = "PSEG_FBF" />
68        </cluster>
69    </clusterset>
70
71    <globalset> 
72
73*** segments used by the boot code / A[31:28] = 0xB / Identity mapping
74
75        <vseg name = "seg_boot_code"      vbase = "0xBFC00000" mode = "CXW_" clusterid = "0" psegname = "PSEG_ROM" ident = "1" >
76            <vobj name = "boot_code"      type = "ELF" length = "0x00008000" binpath    = "build/boot/boot.elf" />
77        </vseg>
78        <vseg name = "seg_boot_data"      vbase = "0x00000000" mode = "C_W_" clusterid = "0" psegname = "PSEG_RAM" ident = "1" >
79            <vobj name = "boot_data"      type = "ELF" length = "0x00001000" binpath    = "build/boot/boot.elf" />
80        </vseg>
81        <vseg name = "seg_boot_stack"     vbase = "0x00001000" mode = "C_W_" clusterid = "0" psegname = "PSEG_RAM" ident = "1" >
82            <vobj name = "boot_stack"     type = "BUFFER" length = "0x00003000" />
83        </vseg>
84        <vseg name = "seg_boot_mapping"   vbase = "0x00004000" mode = "C_W_" clusterid = "0" psegname = "PSEG_RAM" ident = "1" >
85            <vobj name = "boot_mapping"   type = "BLOB" length  = "0x00004000" binpath  = "map.bin" />
86        </vseg>
87
88*** peripherals / A[31:28] = 0xB / Identity mapping
89
90        <vseg name = "seg_fbf"            vbase = "0xB2000000" mode = "__W_" clusterid = "0" psegname = "PSEG_FBF" ident = "1" >
91            <vobj name = "fbf"            type = "PERI" length  = "0x00004000" /> 
92        </vseg>
93        <vseg name = "seg_ioc"            vbase = "0xB3000000" mode = "__W_" clusterid = "0" psegname = "PSEG_IOC" ident = "1" >
94            <vobj name = "ioc"            type = "PERI" length  = "0x00001000" /> 
95        </vseg>
96        <vseg name = "seg_tty"            vbase = "0xB4000000" mode = "__W_" clusterid = "0" psegname = "PSEG_TTY" ident = "1" >
97                        <vobj name = "tty"            type = "PERI" length  = "0x00001000" />
98        </vseg>
99        <vseg name = "seg_nic"            vbase = "0xB5000000" mode = "__W_" clusterid = "0" psegname = "PSEG_NIC" ident = "1" >
100            <vobj name = "nic"            type = "PERI" length  = "0x00021000" /> 
101        </vseg>
102
103*** segments used by the kernel / A[31:28] = 0x8
104 
105        <vseg name = "seg_kernel_code"    vbase = "0x80000000" mode = "CX__" clusterid = "0" psegname = "PSEG_RAM" > 
106            <vobj name = "kernel_code"    type = "ELF" length = "0x00010000" binpath = "build/sys/sys.elf" />
107        </vseg>
108        <vseg name = "seg_kernel_data"    vbase = "0x80020000" mode = "C_W_" clusterid = "0" psegname = "PSEG_RAM" > 
109            <vobj name = "kernel_data"    type = "ELF" length = "0x00040000" binpath = "build/sys/sys.elf" />
110                </vseg>
111        <vseg name = "seg_kernel_uncdata" vbase = "0x80080000" mode = "__W_" clusterid = "0" psegname = "PSEG_RAM" > 
112            <vobj name = "kernel_uncdata" type = "ELF" length = "0x00010000" binpath = "build/sys/sys.elf" />
113        </vseg>
114        <vseg name = "seg_kernel_init"    vbase = "0x80090000" mode = "CX__" clusterid = "0" psegname = "PSEG_RAM" > 
115            <vobj name  = "kernel_init"   type = "ELF" length = "0x00010000" binpath    = "build/sys/sys.elf" />
116        </vseg>
117
118        <vseg name = "seg_icu_0"          vbase = "0xE0000000" mode = "__W_" clusterid = "0" psegname = "PSEG_XICU" > 
119            <vobj name = "icu_0"          type = "PERI" length  = "0x00001000" /> 
120        </vseg>
121
122        <vseg name = "seg_dma_0"          vbase = "0xD0000000" mode = "__W_" clusterid = "0" psegname = "PSEG_DMA" >
123            <vobj name = "dma_0"          type = "PERI" length  = "0x00008000" />
124        </vseg>
125
126        <vseg name = "seg_sched_0"        vbase = "0xF0000000" mode = "C_W_" clusterid = "0" psegname = "PSEG_RAM" >
127            <vobj name = "sched_0"        type = "SCHED" length  = "0x00008000" />
128        </vseg>
129    </globalset> 
130
131    <vspaceset>
132        <vspace name = "router" startname = "router_data" > 
133            <vseg name = "seg_data"        vbase = "0x00800000" mode = "__WU" clusterid = "0" psegname = "PSEG_RAM" >
134                <vobj name = "router_data" type = "ELF" length = "0x00010000" binpath = "build/router/router.elf" />
135            </vseg>
136            <vseg name = "seg_code"        vbase = "0x00400000" mode = "CX_U" clusterid = "0" psegname = "PSEG_RAM" > 
137                <vobj name = "router_code" type = "ELF" length = "0x00010000" binpath = "build/router/router.elf" /> 
138            </vseg>
139            <vseg name = "seg_ptab"        vbase = "0x00300000" mode = "C___" clusterid = "0" psegname = "PSEG_RAM" > 
140                <vobj name = "ptab"        type = "PTAB" length  = "0x00012000" align   = "13" />
141            </vseg>
142            <vseg name = "seg_stack_prod"  vbase = "0x00010000" mode = "C_WU" clusterid = "0" psegname = "PSEG_RAM" >
143                <vobj name = "stack_prod"  type = "BUFFER" length = "0x00010000" /> 
144                <vobj name = "heap_prod"   type = "BUFFER" length = "0x00010000" /> 
145            </vseg>
146            <vseg name = "seg_stack_cons"  vbase = "0x00030000" mode = "C_WU" clusterid = "0" psegname = "PSEG_RAM" > 
147                <vobj name = "stack_cons"  type = "BUFFER" length = "0x00010000" />
148                <vobj name = "heap_cons"   type = "BUFFER" length = "0x00010000" /> 
149            </vseg>
150            <vseg name = "seg_stack_routA" vbase = "0x00050000" mode = "C_WU" clusterid = "0" psegname = "PSEG_RAM" > 
151                <vobj name = "stack_routA" type = "BUFFER" length = "0x00010000" />
152                <vobj name = "heap_routA"  type = "BUFFER" length = "0x00010000" /> 
153            </vseg>
154            <vseg name = "seg_stack_routB" vbase = "0x00070000" mode = "C_WU" clusterid = "0" psegname = "PSEG_RAM" > 
155                <vobj name = "stack_routB" type = "BUFFER" length = "0x00010000" />
156                <vobj name = "heap_routB"  type = "BUFFER" length = "0x00010000" /> 
157            </vseg>
158            <vseg name = "seg_mwmrs"       vbase = "0x00090000" mode = "C_WU" clusterid = "0" psegname = "PSEG_RAM" > 
159                <vobj name = "mwmr_in"     type = "MWMR" length = "0x00000020" init = "1" />
160                <vobj name = "mwmr_out"    type = "MWMR" length = "0x00000020" init = "1" />
161                    </vseg>
162
163            <task name = "producer" clusterid = "0" proclocid = "0" stackname = "stack_prod"  heapname = "heap_prod"  startid = "0" usetty = "1" />
164            <task name = "consumer" clusterid = "0" proclocid = "1" stackname = "stack_cons"  heapname = "heap_cons"  startid = "1" usetty = "1" />
165            <task name = "router_A" clusterid = "0" proclocid = "2" stackname = "stack_routA" heapname = "heap_routA" startid = "2" usetty = "1" />
166            <task name = "router_B" clusterid = "0" proclocid = "3" stackname = "stack_routB" heapname = "heap_routB" startid = "2" usetty = "1" />
167        </vspace>
168
169        <vspace name = "hello" startname = "hello_data" >
170            <vseg name = "seg_data"        vbase = "0x00800000" mode = "C_WU" clusterid = "0" psegname = "PSEG_RAM" >
171                <vobj name = "hello_data"  type = "ELF" length = "0x00010000" binpath = "build/hello/hello.elf" />
172            </vseg>
173            <vseg name = "seg_code"        vbase = "0x00400000" mode = "CX_U" clusterid = "0" psegname = "PSEG_RAM" > 
174                <vobj name = "hello_code"  type = "ELF" length = "0x00010000" binpath = "build/hello/hello.elf" />
175            </vseg>
176            <vseg name = "seg_ptab"        vbase = "0x00300000" mode = "C___" clusterid = "0" psegname = "PSEG_RAM" >
177                <vobj name = "ptab"        type = "PTAB" length = "0x00012000" align = "13" /> 
178            </vseg>
179            <vseg name = "seg_stack"       vbase = "0x00010000" mode = "C_WU" clusterid = "0" psegname = "PSEG_RAM" >
180                <vobj name = "stack"       type = "BUFFER" length = "0x00010000" />
181                <vobj name = "heap"        type = "BUFFER" length = "0x00010000" />
182            </vseg>
183
184            <task name = "main_hello" clusterid = "0" proclocid = "0" stackname = "stack" heapname = "heap" startid = "0" usetty = "1" />
185        </vspace>
186
187        <vspace name = "pgcd" startname = "pgcd_data" >
188            <vseg name = "seg_data"        vbase = "0x00800000" mode = "C_WU" clusterid = "0" psegname = "PSEG_RAM" >
189                <vobj name      = "pgcd_data"  type     = "ELF" length = "0x00010000" binpath = "build/pgcd/pgcd.elf" />
190            </vseg>
191            <vseg name = "seg_code"        vbase = "0x00400000" mode = "CX_U" clusterid = "0" psegname = "PSEG_RAM" >
192                <vobj name = "pgcd_code"   type = "ELF" length = "0x00010000" binpath = "build/pgcd/pgcd.elf" />
193            </vseg>
194            <vseg name = "seg_ptab"        vbase = "0x00300000" mode = "C___" clusterid = "0" psegname = "PSEG_RAM" >
195                <vobj name = "ptab"        type = "PTAB" length = "0x00012000" align = "13" />
196            </vseg>
197            <vseg name = "seg_stack"       vbase = "0x00010000" mode = "C_WU" clusterid = "0" psegname = "PSEG_RAM" >
198                <vobj name = "stack"       type = "BUFFER" length = "0x00010000" /> 
199                <vobj name = "heap"        type = "BUFFER" length = "0x00010000" /> 
200            </vseg>
201
202            <task name = "main_pgcd" clusterid = "0" proclocid = "2" stackname = "stack" heapname = "heap" startid = "0" usetty = "1" />
203        </vspace>
204
205        <vspace name = "display" startname = "disp_data" >
206            <vseg name = "seg_data"        vbase = "0x00800000" mode = "C_WU" clusterid = "0" psegname = "PSEG_RAM" >
207                <vobj name = "disp_data"   type = "ELF" length = "0x00010000" binpath = "build/display/display.elf" />
208                        </vseg>
209            <vseg name = "seg_code"        vbase = "0x00400000" mode = "CX_U" clusterid = "0" psegname = "PSEG_RAM" >
210                <vobj name = "disp_code"   type = "ELF" length = "0x00010000" binpath = "build/display/display.elf" />
211            </vseg>
212            <vseg name = "seg_ptab"        vbase = "0x00300000" mode = "C___" clusterid = "0" psegname = "PSEG_RAM" >
213                <vobj name = "ptab"        type = "PTAB" length  = "0x00012000" align   = "13" />
214            </vseg>
215            <vseg name = "seg_stack"       vbase = "0x00010000" mode = "C_WU" clusterid = "0" psegname = "PSEG_RAM" >
216                <vobj name = "stack"       type = "BUFFER" length = "0x00010000" />
217                <vobj name = "heap"        type = "BUFFER" length = "0x00010000" />
218            </vseg>
219
220            <task name = "main_display" clusterid = "0" proclocid = "3" stackname = "stack" heapname = "heap" startid = "0" usetty = "1" usedma = "1" />
221        </vspace>
222               
223
224    </vspaceset>
225</mapping_info>
Note: See TracBrowser for help on using the repository browser.