[311] | 1 | <?xml version="1.0"?> |
---|
| 2 | |
---|
| 3 | <mapping_info signature = "0xdace2014" |
---|
| 4 | name = "4c_1p_four_leti_ext" |
---|
| 5 | x_size = "2" |
---|
| 6 | y_size = "3" |
---|
| 7 | x_width = "4" |
---|
| 8 | y_width = "4" |
---|
| 9 | irq_per_proc = "4" |
---|
| 10 | use_ramdisk = "0" |
---|
| 11 | x_io = "1" |
---|
| 12 | y_io = "2" > |
---|
| 13 | |
---|
| 14 | *** This mapping is for the "tsar_generic_leti" hardware architecture |
---|
| 15 | *** with 4 clusters containing processors and 4 processors per cluster |
---|
| 16 | *** 40 bits physical address, and 64 Mbytes per cluster. |
---|
| 17 | *** It uses the external peripherals, which means 2*3 clusters, because |
---|
| 18 | *** External peripherals are implemented in cluster(1,2), and the associated WTI |
---|
| 19 | *** are routed by the PIC component to the XCU in cluster (0,0). |
---|
| 20 | *** Cluster (0,0) contains two backup peripherals (TTY and Block Device), |
---|
| 21 | *** and the corresponding HWI are connected to the XICU in cluster (0,0) |
---|
| 22 | |
---|
| 23 | *** Four concurrent applications are launched on this 4 processors platform |
---|
| 24 | *** router, hello, pgcd, display, running 7 tasks. |
---|
| 25 | |
---|
| 26 | <clusterset> |
---|
| 27 | |
---|
| 28 | <cluster x = "0" y = "0" > |
---|
| 29 | <pseg name = "PSEG_RAM" type = "RAM" base = "0x0000000000" length = "0x0001000000" /> |
---|
| 30 | <pseg name = "PSEG_XCU" type = "PERI" base = "0x00F0000000" length = "0x0000002000" /> |
---|
| 31 | <pseg name = "PSEG_MMC" type = "PERI" base = "0x00E0000000" length = "0x0000001000" /> |
---|
| 32 | <pseg name = "PSEG_IOC" type = "PERI" base = "0x00F2000000" length = "0x0000001000" /> |
---|
| 33 | <pseg name = "PSEG_TTY" type = "PERI" base = "0x00F4000000" length = "0x0000001000" /> |
---|
| 34 | |
---|
| 35 | <proc index = "0" /> |
---|
| 36 | |
---|
| 37 | <periph type = "MMC" psegname = "PSEG_MMC" > |
---|
| 38 | </periph> |
---|
| 39 | <periph type = "IOC" psegname = "PSEG_IOC" subtype = "BDV" > |
---|
| 40 | </periph> |
---|
| 41 | <periph type = "TTY" psegname = "PSEG_TTY" channels = "1" > |
---|
| 42 | </periph> |
---|
| 43 | <periph type = "XCU" psegname = "PSEG_XCU" channels = "16" > |
---|
| 44 | <irq srcid = "0" srctype = "WTI" isr = "ISR_WAKUP" dstx = "0" dsty = "0" dstid = "0" /> |
---|
| 45 | <irq srcid = "4" srctype = "WTI" isr = "ISR_NIC_RX" channel = "0" dstx = "0" dsty = "0" dstid = "0" /> |
---|
| 46 | <irq srcid = "5" srctype = "WTI" isr = "ISR_NIC_RX" channel = "1" dstx = "0" dsty = "0" dstid = "0" /> |
---|
| 47 | <irq srcid = "6" srctype = "WTI" isr = "ISR_NIC_TX" channel = "0" dstx = "0" dsty = "0" dstid = "0" /> |
---|
| 48 | <irq srcid = "7" srctype = "WTI" isr = "ISR_NIC_TX" channel = "1" dstx = "0" dsty = "0" dstid = "0" /> |
---|
| 49 | <irq srcid = "8" srctype = "WTI" isr = "ISR_CMA" channel = "0" dstx = "0" dsty = "0" dstid = "0" /> |
---|
| 50 | <irq srcid = "9" srctype = "WTI" isr = "ISR_CMA" channel = "1" dstx = "0" dsty = "0" dstid = "0" /> |
---|
| 51 | <irq srcid = "10" srctype = "WTI" isr = "ISR_CMA" channel = "2" dstx = "0" dsty = "0" dstid = "0" /> |
---|
| 52 | <irq srcid = "11" srctype = "WTI" isr = "ISR_CMA" channel = "3" dstx = "0" dsty = "0" dstid = "0" /> |
---|
| 53 | <irq srcid = "12" srctype = "WTI" isr = "ISR_BDV" channel = "0" dstx = "0" dsty = "0" dstid = "0" /> |
---|
| 54 | <irq srcid = "13" srctype = "WTI" isr = "ISR_TTY_RX" channel = "0" dstx = "0" dsty = "0" dstid = "0" /> |
---|
| 55 | <irq srcid = "14" srctype = "WTI" isr = "ISR_TTY_RX" channel = "1" dstx = "0" dsty = "0" dstid = "0" /> |
---|
| 56 | |
---|
| 57 | <irq srcid = "0" srctype = "PTI" isr = "ISR_TICK" dstx = "0" dsty = "0" dstid = "0" /> |
---|
| 58 | |
---|
| 59 | <irq srcid = "8" srctype = "HWI" isr = "ISR_DEFAULT" dstx = "0" dsty = "0" dstid = "0" /> |
---|
| 60 | <irq srcid = "9" srctype = "HWI" isr = "ISR_BDV" channel = "0" dstx = "0" dsty = "0" dstid = "0" /> |
---|
| 61 | <irq srcid = "10" srctype = "HWI" isr = "ISR_TTY_RX" channel = "0" dstx = "0" dsty = "0" dstid = "0" /> |
---|
| 62 | </periph> |
---|
| 63 | </cluster> |
---|
| 64 | |
---|
| 65 | <cluster x = "0" y = "1" > |
---|
| 66 | <pseg name = "PSEG_RAM" type = "RAM" base = "0x0100000000" length = "0x0400000000" /> |
---|
| 67 | <pseg name = "PSEG_XCU" type = "PERI" base = "0x01F0000000" length = "0x0000002000" /> |
---|
| 68 | <pseg name = "PSEG_MMC" type = "PERI" base = "0x01E0000000" length = "0x0000001000" /> |
---|
| 69 | |
---|
| 70 | <proc index = "0" /> |
---|
| 71 | |
---|
| 72 | <periph type = "MMC" psegname = "PSEG_MMC" > |
---|
| 73 | </periph> |
---|
| 74 | <periph type = "XCU" psegname = "PSEG_XCU" channels = "16" > |
---|
| 75 | <irq srcid = "0" srctype = "WTI" isr = "ISR_WAKUP" dstx = "0" dsty = "1" dstid = "0" /> |
---|
| 76 | <irq srcid = "0" srctype = "PTI" isr = "ISR_TICK" dstx = "0" dsty = "1" dstid = "0" /> |
---|
| 77 | <irq srcid = "8" srctype = "HWI" isr = "ISR_DEFAULT" dstx = "0" dsty = "1" dstid = "0" /> |
---|
| 78 | <irq srcid = "13" srctype = "WTI" isr = "ISR_TTY_RX" channel = "2" dstx = "0" dsty = "1" dstid = "0" /> |
---|
| 79 | <irq srcid = "14" srctype = "WTI" isr = "ISR_TTY_RX" channel = "3" dstx = "0" dsty = "1" dstid = "0" /> |
---|
| 80 | </periph> |
---|
| 81 | </cluster> |
---|
| 82 | |
---|
| 83 | <cluster x = "1" y = "0" > |
---|
| 84 | <pseg name = "PSEG_RAM" type = "RAM" base = "0x1000000000" length = "0x0400000000" /> |
---|
| 85 | <pseg name = "PSEG_XCU" type = "PERI" base = "0x10F0000000" length = "0x0000002000" /> |
---|
| 86 | <pseg name = "PSEG_MMC" type = "PERI" base = "0x10E0000000" length = "0x0000001000" /> |
---|
| 87 | |
---|
| 88 | <proc index = "0" /> |
---|
| 89 | |
---|
| 90 | <periph type = "MMC" psegname = "PSEG_MMC" > |
---|
| 91 | </periph> |
---|
| 92 | <periph type = "XCU" psegname = "PSEG_XCU" channels = "16" > |
---|
| 93 | <irq srcid = "0" srctype = "WTI" isr = "ISR_WAKUP" dstx = "1" dsty = "0" dstid = "0" /> |
---|
| 94 | <irq srcid = "0" srctype = "PTI" isr = "ISR_TICK" dstx = "1" dsty = "0" dstid = "0" /> |
---|
| 95 | <irq srcid = "8" srctype = "HWI" isr = "ISR_DEFAULT" dstx = "1" dsty = "0" dstid = "0" /> |
---|
| 96 | <irq srcid = "13" srctype = "WTI" isr = "ISR_TTY_RX" channel = "4" dstx = "1" dsty = "0" dstid = "0" /> |
---|
| 97 | <irq srcid = "14" srctype = "WTI" isr = "ISR_TTY_RX" channel = "5" dstx = "1" dsty = "0" dstid = "0" /> |
---|
| 98 | </periph> |
---|
| 99 | </cluster> |
---|
| 100 | |
---|
| 101 | <cluster x = "1" y = "1" > |
---|
| 102 | <pseg name = "PSEG_RAM" type = "RAM" base = "0x1100000000" length = "0x0400000000" /> |
---|
| 103 | <pseg name = "PSEG_XCU" type = "PERI" base = "0x11F0000000" length = "0x0000002000" /> |
---|
| 104 | <pseg name = "PSEG_MMC" type = "PERI" base = "0x11E0000000" length = "0x0000001000" /> |
---|
| 105 | |
---|
| 106 | <proc index = "0" /> |
---|
| 107 | |
---|
| 108 | <periph type = "MMC" psegname = "PSEG_MMC" > |
---|
| 109 | </periph> |
---|
| 110 | <periph type = "XCU" psegname = "PSEG_XCU" channels = "16" > |
---|
| 111 | <irq srcid = "0" srctype = "WTI" isr = "ISR_WAKUP" dstx = "1" dsty = "1" dstid = "0" /> |
---|
| 112 | <irq srcid = "0" srctype = "PTI" isr = "ISR_TICK" dstx = "1" dsty = "1" dstid = "0" /> |
---|
| 113 | <irq srcid = "8" srctype = "HWI" isr = "ISR_DEFAULT" dstx = "1" dsty = "1" dstid = "0" /> |
---|
| 114 | <irq srcid = "13" srctype = "WTI" isr = "ISR_TTY_RX" channel = "6" dstx = "1" dsty = "1" dstid = "0" /> |
---|
| 115 | <irq srcid = "14" srctype = "WTI" isr = "ISR_TTY_RX" channel = "7" dstx = "1" dsty = "1" dstid = "0" /> |
---|
| 116 | </periph> |
---|
| 117 | </cluster> |
---|
| 118 | |
---|
| 119 | *** empty cluster |
---|
| 120 | |
---|
| 121 | <cluster x = "0" y = "2" > |
---|
| 122 | </cluster> |
---|
| 123 | |
---|
| 124 | *** cluster_io |
---|
| 125 | |
---|
| 126 | <cluster x = "1" y = "2" > |
---|
| 127 | <pseg name = "PSEG_IOC" type = "PERI" base = "0x12F2000000" length = "0x0000001000" /> |
---|
| 128 | <pseg name = "PSEG_FBF" type = "PERI" base = "0x12F3000000" length = "0x0000004000" /> |
---|
| 129 | <pseg name = "PSEG_TTY" type = "PERI" base = "0x12F4000000" length = "0x0000001000" /> |
---|
| 130 | <pseg name = "PSEG_NIC" type = "PERI" base = "0x12F7000000" length = "0x0000080000" /> |
---|
| 131 | <pseg name = "PSEG_CMA" type = "PERI" base = "0x12F8000000" length = "0x0000008000" /> |
---|
| 132 | <pseg name = "PSEG_PIC" type = "PERI" base = "0x12F9000000" length = "0x0000004000" /> |
---|
| 133 | |
---|
| 134 | <periph type = "IOC" psegname = "PSEG_IOC" subtype = "BDV" > |
---|
| 135 | </periph> |
---|
| 136 | <periph type = "FBF" psegname = "PSEG_FBF" > |
---|
| 137 | </periph> |
---|
| 138 | <periph type = "TTY" psegname = "PSEG_TTY" channels = "8" > |
---|
| 139 | </periph> |
---|
| 140 | <periph type = "NIC" psegname = "PSEG_NIC" channels = "2" > |
---|
| 141 | </periph> |
---|
| 142 | <periph type = "CMA" psegname = "PSEG_CMA" channels = "4" > |
---|
| 143 | </periph> |
---|
| 144 | <periph type = "PIC" psegname = "PSEG_PIC" channels = "32" > |
---|
| 145 | <irq srcid = "0" srctype = "HWI" isr = "ISR_NIC_RX" channel = "0" dstx = "0" dsty = "0" dstid = "4" /> |
---|
| 146 | <irq srcid = "1" srctype = "HWI" isr = "ISR_NIC_RX" channel = "1" dstx = "0" dsty = "0" dstid = "5" /> |
---|
| 147 | |
---|
| 148 | <irq srcid = "2" srctype = "HWI" isr = "ISR_NIC_TX" channel = "0" dstx = "0" dsty = "0" dstid = "6" /> |
---|
| 149 | <irq srcid = "3" srctype = "HWI" isr = "ISR_NIC_TX" channel = "1" dstx = "0" dsty = "0" dstid = "7" /> |
---|
| 150 | |
---|
| 151 | <irq srcid = "4" srctype = "HWI" isr = "ISR_CMA" channel = "0" dstx = "0" dsty = "0" dstid = "8" /> |
---|
| 152 | <irq srcid = "5" srctype = "HWI" isr = "ISR_CMA" channel = "1" dstx = "0" dsty = "0" dstid = "9" /> |
---|
| 153 | <irq srcid = "6" srctype = "HWI" isr = "ISR_CMA" channel = "2" dstx = "0" dsty = "0" dstid = "10" /> |
---|
| 154 | <irq srcid = "7" srctype = "HWI" isr = "ISR_CMA" channel = "3" dstx = "0" dsty = "0" dstid = "11" /> |
---|
| 155 | |
---|
| 156 | <irq srcid = "8" srctype = "HWI" isr = "ISR_BDV" channel = "0" dstx = "0" dsty = "0" dstid = "12" /> |
---|
| 157 | |
---|
| 158 | <irq srcid = "16" srctype = "HWI" isr = "ISR_TTY_RX" channel = "0" dstx = "0" dsty = "0" dstid = "13" /> |
---|
| 159 | <irq srcid = "17" srctype = "HWI" isr = "ISR_TTY_RX" channel = "1" dstx = "0" dsty = "0" dstid = "14" /> |
---|
| 160 | <irq srcid = "18" srctype = "HWI" isr = "ISR_TTY_RX" channel = "2" dstx = "0" dsty = "1" dstid = "13" /> |
---|
| 161 | <irq srcid = "19" srctype = "HWI" isr = "ISR_TTY_RX" channel = "3" dstx = "0" dsty = "1" dstid = "14" /> |
---|
| 162 | <irq srcid = "20" srctype = "HWI" isr = "ISR_TTY_RX" channel = "4" dstx = "1" dsty = "0" dstid = "13" /> |
---|
| 163 | <irq srcid = "21" srctype = "HWI" isr = "ISR_TTY_RX" channel = "5" dstx = "1" dsty = "0" dstid = "14" /> |
---|
| 164 | <irq srcid = "21" srctype = "HWI" isr = "ISR_TTY_RX" channel = "6" dstx = "1" dsty = "1" dstid = "13" /> |
---|
| 165 | <irq srcid = "22" srctype = "HWI" isr = "ISR_TTY_RX" channel = "7" dstx = "1" dsty = "1" dstid = "14" /> |
---|
| 166 | </periph> |
---|
| 167 | </cluster> |
---|
| 168 | |
---|
| 169 | </clusterset> |
---|
| 170 | |
---|
| 171 | <globalset> |
---|
| 172 | |
---|
| 173 | *** Global vsegs associated to peripherals replicated in all clusters (XCU, MMC, SCHED) |
---|
| 174 | *** must respect the following policy (checked by the XML parser) : |
---|
| 175 | *** vbase[x,y] = vbase[0,0] + 64K * cluster_xy |
---|
| 176 | *** pbase[x,y] = pbase[0,0] + 4G * cluster_xy |
---|
| 177 | *** ( with cluster_xy = x*16 + y ) |
---|
| 178 | *** the vseg type is entirely defined by the 8 virtual address MSB bits (mask_type = 0xFF000000) |
---|
| 179 | *** The cluster index must be encoded in the next 8 virtual address bits (cluster_mask = 0x00FF0000) |
---|
| 180 | |
---|
| 181 | *** 5 global vsegs used by the boot code / A[31:28] = 0x0 / Identity mapping |
---|
| 182 | *** seg_boot_mapping is loaded by the boot-loader. It contains the mapping info. Reused by the kernel. |
---|
| 183 | *** seg_boot_code and seg_boot data are loaded by the preloader, used by the boot-loader. Not reused by the kernel. |
---|
| 184 | *** seg_boot_stack contains the stacks used by all processors during reset and boot. Not reused by the Kernel. |
---|
| 185 | *** seg_boot_buffer is used by the boot-loader. It contains a complete .elf file. Not reused by the kernel. |
---|
| 186 | |
---|
| 187 | <vseg name = "seg_boot_code" vbase = "0x00010000" mode = "CXW_" x = "0" y = "0" psegname = "PSEG_RAM" ident = "1" > |
---|
| 188 | <vobj name = "boot_code" type = "BUFFER" length = "0x00020000" /> |
---|
| 189 | </vseg> |
---|
| 190 | <vseg name = "seg_boot_data" vbase = "0x00030000" mode = "C_W_" x = "0" y = "0" psegname = "PSEG_RAM" ident = "1" > |
---|
| 191 | <vobj name = "boot_data" type = "BUFFER" length = "0x00010000" /> |
---|
| 192 | </vseg> |
---|
| 193 | <vseg name = "seg_boot_buffer" vbase = "0x00040000" mode = "C_W_" x = "0" y = "0" psegname = "PSEG_RAM" ident = "1" > |
---|
| 194 | <vobj name = "boot_buffer" type = "BUFFER" length = "0x00060000" /> |
---|
| 195 | </vseg> |
---|
| 196 | <vseg name = "seg_boot_stack" vbase = "0x000A0000" mode = "C_W_" x = "0" y = "0" psegname = "PSEG_RAM" ident = "1" > |
---|
| 197 | <vobj name = "boot_stack" type = "BUFFER" length = "0x00050000" /> |
---|
| 198 | </vseg> |
---|
| 199 | <vseg name = "seg_boot_mapping" vbase = "0x000F0000" mode = "C_W_" x = "0" y = "0" psegname = "PSEG_RAM" ident = "1" > |
---|
| 200 | <vobj name = "boot_mapping" type = "BLOB" length = "0x00010000" binpath = "map.bin" /> |
---|
| 201 | </vseg> |
---|
| 202 | |
---|
| 203 | *** 4 global vsegs used by the kernel / A[31:28] = 0x8 / No identity mapping constraint |
---|
| 204 | |
---|
| 205 | <vseg name = "seg_kernel_code" vbase = "0x80000000" mode = "CXW_" x = "0" y = "0" psegname = "PSEG_RAM" > |
---|
| 206 | <vobj name = "kernel_code" type = "ELF" length = "0x00020000" binpath = "build/kernel/kernel.elf" /> |
---|
| 207 | </vseg> |
---|
| 208 | <vseg name = "seg_kernel_data" vbase = "0x80020000" mode = "C_W_" x = "0" y = "0" psegname = "PSEG_RAM" > |
---|
| 209 | <vobj name = "kernel_data" type = "ELF" length = "0x00060000" binpath = "build/kernel/kernel.elf" /> |
---|
| 210 | </vseg> |
---|
| 211 | <vseg name = "seg_kernel_uncdata" vbase = "0x80080000" mode = "__W_" x = "0" y = "0" psegname = "PSEG_RAM" > |
---|
| 212 | <vobj name = "kernel_uncdata" type = "ELF" length = "0x00040000" binpath = "build/kernel/kernel.elf" /> |
---|
| 213 | </vseg> |
---|
| 214 | <vseg name = "seg_kernel_init" vbase = "0x800C0000" mode = "CXW_" x = "0" y = "0" psegname = "PSEG_RAM" > |
---|
| 215 | <vobj name = "kernel_init" type = "ELF" length = "0x00010000" binpath = "build/kernel/kernel.elf" /> |
---|
| 216 | </vseg> |
---|
| 217 | |
---|
| 218 | *** 6 global vsegs for non replicated peripherals in cluster(1,2) / A[31:28] = 0xF / |
---|
| 219 | |
---|
| 220 | <vseg name = "seg_ioc" vbase = "0xF2000000" mode = "__W_" x = "1" y = "2" psegname = "PSEG_IOC" > |
---|
| 221 | <vobj name = "ioc" type = "PERI" length = "0x00001000" /> |
---|
| 222 | </vseg> |
---|
| 223 | <vseg name = "seg_tty" vbase = "0xF4000000" mode = "__W_" x = "1" y = "2" psegname = "PSEG_TTY" > |
---|
| 224 | <vobj name = "tty" type = "PERI" length = "0x00001000" /> |
---|
| 225 | </vseg> |
---|
| 226 | <vseg name = "seg_nic" vbase = "0xF5000000" mode = "__W_" x = "1" y = "2" psegname = "PSEG_NIC" > |
---|
| 227 | <vobj name = "nic" type = "PERI" length = "0x00080000" /> |
---|
| 228 | </vseg> |
---|
| 229 | <vseg name = "seg_cma" vbase = "0xF8000000" mode = "__W_" x = "1" y = "2" psegname = "PSEG_CMA" > |
---|
| 230 | <vobj name = "cma" type = "PERI" length = "0x00008000" /> |
---|
| 231 | </vseg> |
---|
| 232 | <vseg name = "seg_fbf" vbase = "0xF3000000" mode = "__W_" x = "1" y = "2" psegname = "PSEG_FBF" > |
---|
| 233 | <vobj name = "fbf" type = "PERI" length = "0x00004000" /> |
---|
| 234 | </vseg> |
---|
| 235 | <vseg name = "seg_pic" vbase = "0xF9000000" mode = "__W_" x = "1" y = "2" psegname = "PSEG_PIC" > |
---|
| 236 | <vobj name = "pic" type = "PERI" length = "0x00004000" /> |
---|
| 237 | </vseg> |
---|
| 238 | |
---|
| 239 | *** 1 global vseg for pseudo-peripherals (PRELOADER) / A[31:28] = 0x0 |
---|
| 240 | |
---|
| 241 | <vseg name = "seg_reset_code" vbase = "0x00000000" mode = "CX__" x = "0" y = "0" psegname = "PSEG_RAM" ident = "1" > |
---|
| 242 | <vobj name = "preloader" type = "BUFFER" length = "0x00010000" /> |
---|
| 243 | </vseg> |
---|
| 244 | |
---|
| 245 | *** 4 global vsegs for replicated ICUS / A[31:24] = 0xF0 / Increment = 0x10000 / Identity mapping in cluster (0,0) |
---|
| 246 | |
---|
| 247 | <vseg name = "seg_icu_0" vbase = "0xF0000000" mode = "__W_" x = "0" y = "0" psegname = "PSEG_XCU" ident = "1" > |
---|
| 248 | <vobj name = "icu_0" type = "PERI" length = "0x00001000" /> |
---|
| 249 | </vseg> |
---|
| 250 | <vseg name = "seg_icu_1" vbase = "0xF0010000" mode = "__W_" x = "0" y = "1" psegname = "PSEG_XCU" > |
---|
| 251 | <vobj name = "icu_1" type = "PERI" length = "0x00001000" /> |
---|
| 252 | </vseg> |
---|
| 253 | <vseg name = "seg_icu_2" vbase = "0xF0100000" mode = "__W_" x = "1" y = "0" psegname = "PSEG_XCU" > |
---|
| 254 | <vobj name = "icu_2" type = "PERI" length = "0x00001000" /> |
---|
| 255 | </vseg> |
---|
| 256 | <vseg name = "seg_icu_3" vbase = "0xF0110000" mode = "__W_" x = "1" y = "1" psegname = "PSEG_XCU" > |
---|
| 257 | <vobj name = "icu_3" type = "PERI" length = "0x00001000" /> |
---|
| 258 | </vseg> |
---|
| 259 | |
---|
| 260 | *** 4 global vsegs for replicated MMC / A[31:24] = 0xE0 / Increment = 0x10000 / Identity mapping in cluster 0 |
---|
| 261 | |
---|
| 262 | <vseg name = "seg_memc_0" vbase = "0xE0000000" mode = "__W_" x = "0" y = "0" psegname = "PSEG_MMC" ident = "1" > |
---|
| 263 | <vobj name = "memc_0" type = "PERI" length = "0x00001000" /> |
---|
| 264 | </vseg> |
---|
| 265 | <vseg name = "seg_memc_1" vbase = "0xE0010000" mode = "__W_" x = "0" y = "1" psegname = "PSEG_MMC" > |
---|
| 266 | <vobj name = "memc_1" type = "PERI" length = "0x00001000" /> |
---|
| 267 | </vseg> |
---|
| 268 | <vseg name = "seg_memc_2" vbase = "0xE0100000" mode = "__W_" x = "1" y = "0" psegname = "PSEG_MMC" > |
---|
| 269 | <vobj name = "memc_2" type = "PERI" length = "0x00001000" /> |
---|
| 270 | </vseg> |
---|
| 271 | <vseg name = "seg_memc_3" vbase = "0xE0110000" mode = "__W_" x = "1" y = "1" psegname = "PSEG_MMC" > |
---|
| 272 | <vobj name = "memc_3" type = "PERI" length = "0x00001000" /> |
---|
| 273 | </vseg> |
---|
| 274 | |
---|
| 275 | *** 4 global vsegs for replicated schedulers / A[31:28] = 0xC / Increment = 0x10000 |
---|
| 276 | |
---|
| 277 | <vseg name = "seg_sched_0" vbase = "0xC0000000" mode = "C_W_" x = "0" y = "0" psegname = "PSEG_RAM" > |
---|
| 278 | <vobj name = "sched_0" type = "SCHED" length = "0x00008000" /> |
---|
| 279 | </vseg> |
---|
| 280 | <vseg name = "seg_sched_1" vbase = "0xC0010000" mode = "C_W_" x = "0" y = "1" psegname = "PSEG_RAM" > |
---|
| 281 | <vobj name = "sched_1" type = "SCHED" length = "0x00008000" /> |
---|
| 282 | </vseg> |
---|
| 283 | <vseg name = "seg_sched_2" vbase = "0xC0100000" mode = "C_W_" x = "1" y = "0" psegname = "PSEG_RAM" > |
---|
| 284 | <vobj name = "sched_2" type = "SCHED" length = "0x00008000" /> |
---|
| 285 | </vseg> |
---|
| 286 | <vseg name = "seg_sched_3" vbase = "0xC0110000" mode = "C_W_" x = "1" y = "1" psegname = "PSEG_RAM" > |
---|
| 287 | <vobj name = "sched_3" type = "SCHED" length = "0x00008000" /> |
---|
| 288 | </vseg> |
---|
| 289 | |
---|
| 290 | </globalset> |
---|
| 291 | |
---|
| 292 | <vspaceset> |
---|
| 293 | |
---|
| 294 | *** For each vspace, the startname field is the name of the vobj containing the start_vector (entry point array) |
---|
| 295 | *** For each task, the startid field define the task entry point as an index in the start_vector |
---|
| 296 | *** For each task, the x,y and proclocid arguments define the task static placement |
---|
| 297 | *** For each task, the stackname field is the name of the vobj containing the task stack |
---|
| 298 | *** For each task, the heapname field is the name of the vobj containing the task heap |
---|
| 299 | |
---|
| 300 | |
---|
| 301 | <vspace name = "hello" startname = "data" > |
---|
| 302 | <vseg name = "seg_code" vbase = "0x00400000" mode = "CXWU" x = "0" y = "1" psegname = "PSEG_RAM" > |
---|
| 303 | <vobj name = "code" type = "ELF" length = "0x00010000" binpath = "build/hello/hello.elf" /> |
---|
| 304 | </vseg> |
---|
| 305 | <vseg name = "seg_data" vbase = "0x00500000" mode = "C_WU" x = "0" y = "1" psegname = "PSEG_RAM" > |
---|
| 306 | <vobj name = "data" type = "ELF" length = "0x00010000" binpath = "build/hello/hello.elf" /> |
---|
| 307 | </vseg> |
---|
| 308 | <vseg name = "seg_ptab" vbase = "0x00600000" mode = "C_W_" x = "0" y = "1" psegname = "PSEG_RAM" > |
---|
| 309 | <vobj name = "ptab" type = "PTAB" length = "0x00012000" align = "13" /> |
---|
| 310 | </vseg> |
---|
| 311 | <vseg name = "seg_stack" vbase = "0x00700000" mode = "C_WU" x = "0" y = "1" psegname = "PSEG_RAM" > |
---|
| 312 | <vobj name = "stack" type = "BUFFER" length = "0x00010000" /> |
---|
| 313 | <vobj name = "heap" type = "BUFFER" length = "0x00010000" /> |
---|
| 314 | </vseg> |
---|
| 315 | |
---|
| 316 | <task name = "main_hello" x = "0" y = "1" proclocid = "0" stackname = "stack" heapname = "heap" startid = "0" usetty = "1" /> |
---|
| 317 | </vspace> |
---|
| 318 | |
---|
| 319 | <vspace name = "pgcd" startname = "data" > |
---|
| 320 | <vseg name = "seg_code" vbase = "0x00400000" mode = "CXWU" x = "1" y = "0" psegname = "PSEG_RAM" > |
---|
| 321 | <vobj name = "code" type = "ELF" length = "0x00010000" binpath = "build/pgcd/pgcd.elf" /> |
---|
| 322 | </vseg> |
---|
| 323 | <vseg name = "seg_data" vbase = "0x00500000" mode = "C_WU" x = "1" y = "0" psegname = "PSEG_RAM" > |
---|
| 324 | <vobj name = "data" type = "ELF" length = "0x00010000" binpath = "build/pgcd/pgcd.elf" /> |
---|
| 325 | </vseg> |
---|
| 326 | <vseg name = "seg_ptab" vbase = "0x00600000" mode = "C_W_" x = "1" y = "0" psegname = "PSEG_RAM" > |
---|
| 327 | <vobj name = "ptab" type = "PTAB" length = "0x00012000" align = "13" /> |
---|
| 328 | </vseg> |
---|
| 329 | <vseg name = "seg_stack" vbase = "0x00700000" mode = "C_WU" x = "1" y = "0" psegname = "PSEG_RAM" > |
---|
| 330 | <vobj name = "stack" type = "BUFFER" length = "0x00010000" /> |
---|
| 331 | <vobj name = "heap" type = "BUFFER" length = "0x00010000" /> |
---|
| 332 | </vseg> |
---|
| 333 | |
---|
| 334 | <task name = "main_pgcd" x = "1" y = "0" proclocid = "0" stackname = "stack" heapname = "heap" startid = "0" usetty = "1" /> |
---|
| 335 | </vspace> |
---|
| 336 | |
---|
| 337 | <vspace name = "display" startname = "data" > |
---|
| 338 | <vseg name = "seg_code" vbase = "0x00400000" mode = "CXWU" x = "1" y = "1" psegname = "PSEG_RAM" > |
---|
| 339 | <vobj name = "code" type = "ELF" length = "0x00010000" binpath = "build/display/display.elf" /> |
---|
| 340 | </vseg> |
---|
| 341 | <vseg name = "seg_data" vbase = "0x00500000" mode = "C_WU" x = "1" y = "1" psegname = "PSEG_RAM" > |
---|
| 342 | <vobj name = "data" type = "ELF" length = "0x00010000" binpath = "build/display/display.elf" /> |
---|
| 343 | </vseg> |
---|
| 344 | <vseg name = "seg_ptab" vbase = "0x00600000" mode = "C_W_" x = "1" y = "1" psegname = "PSEG_RAM" > |
---|
| 345 | <vobj name = "ptab" type = "PTAB" length = "0x00012000" align = "13" /> |
---|
| 346 | </vseg> |
---|
| 347 | <vseg name = "seg_stack" vbase = "0x00700000" mode = "C_WU" x = "1" y = "1" psegname = "PSEG_RAM" > |
---|
| 348 | <vobj name = "stack" type = "BUFFER" length = "0x00010000" /> |
---|
| 349 | <vobj name = "heap" type = "BUFFER" length = "0x00010000" /> |
---|
| 350 | </vseg> |
---|
| 351 | |
---|
| 352 | <task name = "main_display" x = "1" y = "1" proclocid = "0" stackname = "stack" heapname = "heap" startid = "0" usetty = "1" usecma = "1" /> |
---|
| 353 | </vspace> |
---|
| 354 | |
---|
| 355 | <vspace name = "router" startname = "data" > |
---|
| 356 | <vseg name = "seg_code" vbase = "0x00400000" mode = "CXWU" x = "0" y = "0" psegname = "PSEG_RAM" > |
---|
| 357 | <vobj name = "code" type = "ELF" length = "0x00010000" binpath = "build/router/router.elf" /> |
---|
| 358 | </vseg> |
---|
| 359 | <vseg name = "seg_data" vbase = "0x00500000" mode = "C_WU" x = "0" y = "0" psegname = "PSEG_RAM" > |
---|
| 360 | <vobj name = "data" type = "ELF" length = "0x00010000" binpath = "build/router/router.elf" /> |
---|
| 361 | </vseg> |
---|
| 362 | <vseg name = "seg_ptab" vbase = "0x00600000" mode = "C_W_" x = "0" y = "0" psegname = "PSEG_RAM" > |
---|
| 363 | <vobj name = "ptab" type = "PTAB" length = "0x00012000" align = "13" /> |
---|
| 364 | </vseg> |
---|
| 365 | <vseg name = "seg_stack_prod" vbase = "0x00700000" mode = "C_WU" x = "0" y = "0" psegname = "PSEG_RAM" > |
---|
| 366 | <vobj name = "stack_prod" type = "BUFFER" length = "0x00010000" /> |
---|
| 367 | <vobj name = "heap_prod" type = "BUFFER" length = "0x00010000" /> |
---|
| 368 | </vseg> |
---|
| 369 | <vseg name = "seg_stack_cons" vbase = "0x00800000" mode = "C_WU" x = "0" y = "1" psegname = "PSEG_RAM" > |
---|
| 370 | <vobj name = "stack_cons" type = "BUFFER" length = "0x00010000" /> |
---|
| 371 | <vobj name = "heap_cons" type = "BUFFER" length = "0x00010000" /> |
---|
| 372 | </vseg> |
---|
| 373 | <vseg name = "seg_stack_routA" vbase = "0x00900000" mode = "C_WU" x = "1" y = "0" psegname = "PSEG_RAM" > |
---|
| 374 | <vobj name = "stack_routA" type = "BUFFER" length = "0x00010000" /> |
---|
| 375 | <vobj name = "heap_routA" type = "BUFFER" length = "0x00010000" /> |
---|
| 376 | </vseg> |
---|
| 377 | <vseg name = "seg_stack_routB" vbase = "0x00A00000" mode = "C_WU" x = "1" y = "1" psegname = "PSEG_RAM" > |
---|
| 378 | <vobj name = "stack_routB" type = "BUFFER" length = "0x00010000" /> |
---|
| 379 | <vobj name = "heap_routB" type = "BUFFER" length = "0x00010000" /> |
---|
| 380 | </vseg> |
---|
| 381 | <vseg name = "seg_mwmrs" vbase = "0x00B00000" mode = "C_WU" x = "0" y = "0" psegname = "PSEG_RAM" > |
---|
| 382 | <vobj name = "mwmr_in" type = "MWMR" length = "0x00000020" init = "1" /> |
---|
| 383 | <vobj name = "mwmr_out" type = "MWMR" length = "0x00000020" init = "1" /> |
---|
| 384 | </vseg> |
---|
| 385 | |
---|
| 386 | <task name = "producer" x = "0" y = "0" proclocid = "0" stackname = "stack_prod" heapname = "heap_prod" startid = "0" usetty = "1" /> |
---|
| 387 | <task name = "consumer" x = "0" y = "1" proclocid = "0" stackname = "stack_cons" heapname = "heap_cons" startid = "1" usetty = "1" /> |
---|
| 388 | <task name = "router_A" x = "1" y = "0" proclocid = "0" stackname = "stack_routA" heapname = "heap_routA" startid = "2" usetty = "1" /> |
---|
| 389 | <task name = "router_B" x = "1" y = "1" proclocid = "0" stackname = "stack_routB" heapname = "heap_routB" startid = "2" usetty = "1" /> |
---|
| 390 | </vspace> |
---|
| 391 | |
---|
| 392 | </vspaceset> |
---|
| 393 | </mapping_info> |
---|