| 1 | <?xml version="1.0"?> |
|---|
| 2 | |
|---|
| 3 | <mapping_info signature = "0xdace2014" |
|---|
| 4 | name = "4c_4p_sort_leti" |
|---|
| 5 | x_size = "2" |
|---|
| 6 | y_size = "3" |
|---|
| 7 | x_width = "4" |
|---|
| 8 | y_width = "4" |
|---|
| 9 | irq_per_proc = "4" |
|---|
| 10 | use_ramdisk = "1" |
|---|
| 11 | x_io = "0" |
|---|
| 12 | y_io = "0" > |
|---|
| 13 | |
|---|
| 14 | *** This mapping is for the "tsar_generic_leti" hardware architecture |
|---|
| 15 | *** with 4 clusters containing processors and 4 processors per cluster |
|---|
| 16 | *** 40 bits physical address, and 64 Mbytes per cluster. |
|---|
| 17 | *** There is 4 IRQ inputs per processor |
|---|
| 18 | *** It does not use the external peripherals. |
|---|
| 19 | *** It uses the RAMDISK in cluster(0,0) |
|---|
| 20 | *** It uses the mono-channel TTY implemented in cluster(0,0). |
|---|
| 21 | |
|---|
| 22 | <clusterset> |
|---|
| 23 | <cluster x = "0" y = "0" > |
|---|
| 24 | <pseg name = "PSEG_RAM" type = "RAM" base = "0x0000000000" length = "0x0040000000" /> |
|---|
| 25 | <pseg name = "PSEG_XCU" type = "PERI" base = "0x00F0000000" length = "0x0000002000" /> |
|---|
| 26 | <pseg name = "PSEG_MMC" type = "PERI" base = "0x00E0000000" length = "0x0000001000" /> |
|---|
| 27 | <pseg name = "PSEG_IOC" type = "PERI" base = "0x00F2000000" length = "0x0000001000" /> |
|---|
| 28 | <pseg name = "PSEG_TTY" type = "PERI" base = "0x00F4000000" length = "0x0000001000" /> |
|---|
| 29 | |
|---|
| 30 | <proc index = "0" /> |
|---|
| 31 | <proc index = "1" /> |
|---|
| 32 | <proc index = "2" /> |
|---|
| 33 | <proc index = "3" /> |
|---|
| 34 | |
|---|
| 35 | <periph type = "MMC" psegname = "PSEG_MMC" > |
|---|
| 36 | </periph> |
|---|
| 37 | <periph type = "IOC" psegname = "PSEG_IOC" subtype = "BDV" > |
|---|
| 38 | </periph> |
|---|
| 39 | <periph type = "TTY" psegname = "PSEG_TTY" channels = "1" > |
|---|
| 40 | </periph> |
|---|
| 41 | <periph type = "XCU" psegname = "PSEG_XCU" channels = "16" > |
|---|
| 42 | <irq srcid = "0" srctype = "WTI" isr = "ISR_WAKUP" dstx = "0" dsty = "0" dstid = "0" /> |
|---|
| 43 | <irq srcid = "1" srctype = "WTI" isr = "ISR_WAKUP" dstx = "0" dsty = "0" dstid = "1" /> |
|---|
| 44 | <irq srcid = "2" srctype = "WTI" isr = "ISR_WAKUP" dstx = "0" dsty = "0" dstid = "2" /> |
|---|
| 45 | <irq srcid = "3" srctype = "WTI" isr = "ISR_WAKUP" dstx = "0" dsty = "0" dstid = "3" /> |
|---|
| 46 | <irq srcid = "4" srctype = "WTI" isr = "ISR_NIC_RX" channel = "0" dstx = "0" dsty = "0" dstid = "0" /> |
|---|
| 47 | <irq srcid = "5" srctype = "WTI" isr = "ISR_NIC_RX" channel = "1" dstx = "0" dsty = "0" dstid = "0" /> |
|---|
| 48 | <irq srcid = "6" srctype = "WTI" isr = "ISR_NIC_TX" channel = "0" dstx = "0" dsty = "0" dstid = "0" /> |
|---|
| 49 | <irq srcid = "7" srctype = "WTI" isr = "ISR_NIC_TX" channel = "1" dstx = "0" dsty = "0" dstid = "0" /> |
|---|
| 50 | <irq srcid = "8" srctype = "WTI" isr = "ISR_CMA" channel = "0" dstx = "0" dsty = "0" dstid = "0" /> |
|---|
| 51 | <irq srcid = "9" srctype = "WTI" isr = "ISR_CMA" channel = "1" dstx = "0" dsty = "0" dstid = "0" /> |
|---|
| 52 | <irq srcid = "10" srctype = "WTI" isr = "ISR_CMA" channel = "2" dstx = "0" dsty = "0" dstid = "0" /> |
|---|
| 53 | <irq srcid = "11" srctype = "WTI" isr = "ISR_CMA" channel = "3" dstx = "0" dsty = "0" dstid = "0" /> |
|---|
| 54 | <irq srcid = "12" srctype = "WTI" isr = "ISR_BDV" channel = "0" dstx = "0" dsty = "0" dstid = "0" /> |
|---|
| 55 | <irq srcid = "13" srctype = "WTI" isr = "ISR_TTY_RX" channel = "0" dstx = "0" dsty = "0" dstid = "0" /> |
|---|
| 56 | |
|---|
| 57 | <irq srcid = "0" srctype = "PTI" isr = "ISR_TICK" dstx = "0" dsty = "0" dstid = "0" /> |
|---|
| 58 | <irq srcid = "1" srctype = "PTI" isr = "ISR_TICK" dstx = "0" dsty = "0" dstid = "1" /> |
|---|
| 59 | <irq srcid = "2" srctype = "PTI" isr = "ISR_TICK" dstx = "0" dsty = "0" dstid = "2" /> |
|---|
| 60 | <irq srcid = "3" srctype = "PTI" isr = "ISR_TICK" dstx = "0" dsty = "0" dstid = "3" /> |
|---|
| 61 | |
|---|
| 62 | <irq srcid = "8" srctype = "HWI" isr = "ISR_DEFAULT" dstx = "0" dsty = "0" dstid = "0" /> |
|---|
| 63 | <irq srcid = "9" srctype = "HWI" isr = "ISR_BDV" channel = "0" dstx = "0" dsty = "0" dstid = "0" /> |
|---|
| 64 | <irq srcid = "10" srctype = "HWI" isr = "ISR_TTY_RX" channel = "0" dstx = "0" dsty = "0" dstid = "0" /> |
|---|
| 65 | </periph> |
|---|
| 66 | </cluster> |
|---|
| 67 | |
|---|
| 68 | <cluster x = "0" y = "1" > |
|---|
| 69 | <pseg name = "PSEG_RAM" type = "RAM" base = "0x0100000000" length = "0x0040000000" /> |
|---|
| 70 | <pseg name = "PSEG_XCU" type = "PERI" base = "0x01F0000000" length = "0x0000002000" /> |
|---|
| 71 | <pseg name = "PSEG_MMC" type = "PERI" base = "0x01E0000000" length = "0x0000001000" /> |
|---|
| 72 | |
|---|
| 73 | <proc index = "0" /> |
|---|
| 74 | <proc index = "1" /> |
|---|
| 75 | <proc index = "2" /> |
|---|
| 76 | <proc index = "3" /> |
|---|
| 77 | |
|---|
| 78 | <periph type = "MMC" psegname = "PSEG_MMC" > |
|---|
| 79 | </periph> |
|---|
| 80 | <periph type = "XCU" psegname = "PSEG_XCU" channels = "16" > |
|---|
| 81 | <irq srcid = "0" srctype = "WTI" isr = "ISR_WAKUP" dstx = "0" dsty = "1" dstid = "0" /> |
|---|
| 82 | <irq srcid = "1" srctype = "WTI" isr = "ISR_WAKUP" dstx = "0" dsty = "1" dstid = "1" /> |
|---|
| 83 | <irq srcid = "2" srctype = "WTI" isr = "ISR_WAKUP" dstx = "0" dsty = "1" dstid = "2" /> |
|---|
| 84 | <irq srcid = "3" srctype = "WTI" isr = "ISR_WAKUP" dstx = "0" dsty = "1" dstid = "3" /> |
|---|
| 85 | |
|---|
| 86 | <irq srcid = "0" srctype = "PTI" isr = "ISR_TICK" dstx = "0" dsty = "1" dstid = "0" /> |
|---|
| 87 | <irq srcid = "1" srctype = "PTI" isr = "ISR_TICK" dstx = "0" dsty = "1" dstid = "1" /> |
|---|
| 88 | <irq srcid = "2" srctype = "PTI" isr = "ISR_TICK" dstx = "0" dsty = "1" dstid = "2" /> |
|---|
| 89 | <irq srcid = "3" srctype = "PTI" isr = "ISR_TICK" dstx = "0" dsty = "1" dstid = "3" /> |
|---|
| 90 | |
|---|
| 91 | <irq srcid = "8" srctype = "HWI" isr = "ISR_DEFAULT" dstx = "0" dsty = "1" dstid = "0" /> |
|---|
| 92 | </periph> |
|---|
| 93 | </cluster> |
|---|
| 94 | |
|---|
| 95 | <cluster x = "1" y = "0" > |
|---|
| 96 | <pseg name = "PSEG_RAM" type = "RAM" base = "0x1000000000" length = "0x0040000000" /> |
|---|
| 97 | <pseg name = "PSEG_XCU" type = "PERI" base = "0x10F0000000" length = "0x0000002000" /> |
|---|
| 98 | <pseg name = "PSEG_MMC" type = "PERI" base = "0x10E0000000" length = "0x0000001000" /> |
|---|
| 99 | |
|---|
| 100 | <proc index = "0" /> |
|---|
| 101 | <proc index = "1" /> |
|---|
| 102 | <proc index = "2" /> |
|---|
| 103 | <proc index = "3" /> |
|---|
| 104 | |
|---|
| 105 | <periph type = "MMC" psegname = "PSEG_MMC" > |
|---|
| 106 | </periph> |
|---|
| 107 | <periph type = "XCU" psegname = "PSEG_XCU" channels = "16" > |
|---|
| 108 | <irq srcid = "0" srctype = "WTI" isr = "ISR_WAKUP" dstx = "1" dsty = "0" dstid = "0" /> |
|---|
| 109 | <irq srcid = "1" srctype = "WTI" isr = "ISR_WAKUP" dstx = "1" dsty = "0" dstid = "1" /> |
|---|
| 110 | <irq srcid = "2" srctype = "WTI" isr = "ISR_WAKUP" dstx = "1" dsty = "0" dstid = "2" /> |
|---|
| 111 | <irq srcid = "3" srctype = "WTI" isr = "ISR_WAKUP" dstx = "1" dsty = "0" dstid = "3" /> |
|---|
| 112 | |
|---|
| 113 | <irq srcid = "0" srctype = "PTI" isr = "ISR_TICK" dstx = "1" dsty = "0" dstid = "0" /> |
|---|
| 114 | <irq srcid = "1" srctype = "PTI" isr = "ISR_TICK" dstx = "1" dsty = "0" dstid = "1" /> |
|---|
| 115 | <irq srcid = "2" srctype = "PTI" isr = "ISR_TICK" dstx = "1" dsty = "0" dstid = "2" /> |
|---|
| 116 | <irq srcid = "3" srctype = "PTI" isr = "ISR_TICK" dstx = "1" dsty = "0" dstid = "3" /> |
|---|
| 117 | |
|---|
| 118 | <irq srcid = "8" srctype = "HWI" isr = "ISR_DEFAULT" dstx = "1" dsty = "0" dstid = "0" /> |
|---|
| 119 | </periph> |
|---|
| 120 | </cluster> |
|---|
| 121 | |
|---|
| 122 | <cluster x = "1" y = "1" > |
|---|
| 123 | <pseg name = "PSEG_RAM" type = "RAM" base = "0x1100000000" length = "0x0040000000" /> |
|---|
| 124 | <pseg name = "PSEG_XCU" type = "PERI" base = "0x11F0000000" length = "0x0000002000" /> |
|---|
| 125 | <pseg name = "PSEG_MMC" type = "PERI" base = "0x11E0000000" length = "0x0000001000" /> |
|---|
| 126 | |
|---|
| 127 | <proc index = "0" /> |
|---|
| 128 | <proc index = "1" /> |
|---|
| 129 | <proc index = "2" /> |
|---|
| 130 | <proc index = "3" /> |
|---|
| 131 | |
|---|
| 132 | <periph type = "MMC" psegname = "PSEG_MMC" > |
|---|
| 133 | </periph> |
|---|
| 134 | <periph type = "XCU" psegname = "PSEG_XCU" channels = "16" > |
|---|
| 135 | <irq srcid = "0" srctype = "WTI" isr = "ISR_WAKUP" dstx = "1" dsty = "1" dstid = "0" /> |
|---|
| 136 | <irq srcid = "1" srctype = "WTI" isr = "ISR_WAKUP" dstx = "1" dsty = "1" dstid = "1" /> |
|---|
| 137 | <irq srcid = "2" srctype = "WTI" isr = "ISR_WAKUP" dstx = "1" dsty = "1" dstid = "2" /> |
|---|
| 138 | <irq srcid = "3" srctype = "WTI" isr = "ISR_WAKUP" dstx = "1" dsty = "1" dstid = "3" /> |
|---|
| 139 | |
|---|
| 140 | <irq srcid = "0" srctype = "PTI" isr = "ISR_TICK" dstx = "1" dsty = "1" dstid = "0" /> |
|---|
| 141 | <irq srcid = "1" srctype = "PTI" isr = "ISR_TICK" dstx = "1" dsty = "1" dstid = "1" /> |
|---|
| 142 | <irq srcid = "2" srctype = "PTI" isr = "ISR_TICK" dstx = "1" dsty = "1" dstid = "2" /> |
|---|
| 143 | <irq srcid = "3" srctype = "PTI" isr = "ISR_TICK" dstx = "1" dsty = "1" dstid = "3" /> |
|---|
| 144 | |
|---|
| 145 | <irq srcid = "8" srctype = "HWI" isr = "ISR_DEFAULT" dstx = "1" dsty = "1" dstid = "0" /> |
|---|
| 146 | </periph> |
|---|
| 147 | </cluster> |
|---|
| 148 | |
|---|
| 149 | *** empty clusters |
|---|
| 150 | |
|---|
| 151 | <cluster x = "0" y = "2" > |
|---|
| 152 | </cluster> |
|---|
| 153 | <cluster x = "1" y = "2" > |
|---|
| 154 | </cluster> |
|---|
| 155 | |
|---|
| 156 | </clusterset> |
|---|
| 157 | |
|---|
| 158 | <globalset> |
|---|
| 159 | |
|---|
| 160 | *** Global vsegs associated to peripherals replicated in all clusters (XCU, MMC, SCHED) |
|---|
| 161 | *** must respect the following policy (checked by the XML parser) : |
|---|
| 162 | *** vbase[x,y] = vbase[0,0] + 64K * cluster_xy |
|---|
| 163 | *** pbase[x,y] = pbase[0,0] + 4G * cluster_xy |
|---|
| 164 | *** ( with cluster_xy = x*16 + y ) |
|---|
| 165 | *** the vseg type is entirely defined by the 8 virtual address MSB bits (mask_type = 0xFF000000) |
|---|
| 166 | *** The cluster index must be encoded in the next 8 virtual address bits (cluster_mask = 0x00FF0000) |
|---|
| 167 | |
|---|
| 168 | *** 5 global vsegs used by the boot code / A[31:28] = 0x0 / Identity mapping |
|---|
| 169 | *** seg_boot_mapping is loaded by the boot-loader. It contains the mapping info. Reused by the kernel. |
|---|
| 170 | *** seg_boot_code and seg_boot data are loaded by the preloader, used by the boot-loader. Not reused by the kernel. |
|---|
| 171 | *** seg_boot_stack contains the stacks used by all processors during reset and boot. Not reused by the Kernel. |
|---|
| 172 | *** seg_boot_buffer is used by the boot-loader. It contains a complete .elf file. Not reused by the kernel. |
|---|
| 173 | |
|---|
| 174 | <vseg name = "seg_boot_code" vbase = "0x00010000" mode = "CXW_" x = "0" y = "0" psegname = "PSEG_RAM" ident = "1" > |
|---|
| 175 | <vobj name = "boot_code" type = "BUFFER" length = "0x00020000" /> |
|---|
| 176 | </vseg> |
|---|
| 177 | <vseg name = "seg_boot_data" vbase = "0x00030000" mode = "C_W_" x = "0" y = "0" psegname = "PSEG_RAM" ident = "1" > |
|---|
| 178 | <vobj name = "boot_data" type = "BUFFER" length = "0x00010000" /> |
|---|
| 179 | </vseg> |
|---|
| 180 | <vseg name = "seg_boot_buffer" vbase = "0x00040000" mode = "C_W_" x = "0" y = "0" psegname = "PSEG_RAM" ident = "1" > |
|---|
| 181 | <vobj name = "boot_buffer" type = "BUFFER" length = "0x00060000" /> |
|---|
| 182 | </vseg> |
|---|
| 183 | <vseg name = "seg_boot_stack" vbase = "0x000A0000" mode = "C_W_" x = "0" y = "0" psegname = "PSEG_RAM" ident = "1" > |
|---|
| 184 | <vobj name = "boot_stack" type = "BUFFER" length = "0x00050000" /> |
|---|
| 185 | </vseg> |
|---|
| 186 | <vseg name = "seg_boot_mapping" vbase = "0x000F0000" mode = "C_W_" x = "0" y = "0" psegname = "PSEG_RAM" ident = "1" > |
|---|
| 187 | <vobj name = "boot_mapping" type = "BLOB" length = "0x00010000" binpath = "map.bin" /> |
|---|
| 188 | </vseg> |
|---|
| 189 | |
|---|
| 190 | *** 4 global vsegs used by the kernel / A[31:28] = 0x8 / No identity mapping constraint |
|---|
| 191 | |
|---|
| 192 | <vseg name = "seg_kernel_code" vbase = "0x80000000" mode = "CXW_" x = "0" y = "0" psegname = "PSEG_RAM" > |
|---|
| 193 | <vobj name = "kernel_code" type = "ELF" length = "0x00020000" binpath = "build/kernel/kernel.elf" /> |
|---|
| 194 | </vseg> |
|---|
| 195 | <vseg name = "seg_kernel_data" vbase = "0x80020000" mode = "C_W_" x = "0" y = "0" psegname = "PSEG_RAM" > |
|---|
| 196 | <vobj name = "kernel_data" type = "ELF" length = "0x00060000" binpath = "build/kernel/kernel.elf" /> |
|---|
| 197 | </vseg> |
|---|
| 198 | <vseg name = "seg_kernel_uncdata" vbase = "0x80080000" mode = "__W_" x = "0" y = "0" psegname = "PSEG_RAM" > |
|---|
| 199 | <vobj name = "kernel_uncdata" type = "ELF" length = "0x00040000" binpath = "build/kernel/kernel.elf" /> |
|---|
| 200 | </vseg> |
|---|
| 201 | <vseg name = "seg_kernel_init" vbase = "0x800C0000" mode = "CXW_" x = "0" y = "0" psegname = "PSEG_RAM" > |
|---|
| 202 | <vobj name = "kernel_init" type = "ELF" length = "0x00010000" binpath = "build/kernel/kernel.elf" /> |
|---|
| 203 | </vseg> |
|---|
| 204 | |
|---|
| 205 | *** 2 global vsegs for non replicated peripherals in cluster(0,0) / A[31:28] = 0xF / |
|---|
| 206 | |
|---|
| 207 | <vseg name = "seg_ioc" vbase = "0xF2000000" mode = "__W_" x = "0" y = "0" psegname = "PSEG_IOC" > |
|---|
| 208 | <vobj name = "ioc" type = "PERI" length = "0x00001000" /> |
|---|
| 209 | </vseg> |
|---|
| 210 | |
|---|
| 211 | <vseg name = "seg_tty" vbase = "0xF4000000" mode = "__W_" x = "0" y = "0" psegname = "PSEG_TTY" > |
|---|
| 212 | <vobj name = "tty" type = "PERI" length = "0x00001000" /> |
|---|
| 213 | </vseg> |
|---|
| 214 | |
|---|
| 215 | *** 2 global vsegs for pseudo-peripherals (PRELOADER and RAMDISK) / A[31:28] = 0x0 |
|---|
| 216 | |
|---|
| 217 | <vseg name = "seg_reset_code" vbase = "0x00000000" mode = "CX__" x = "0" y = "0" psegname = "PSEG_RAM" ident = "1" > |
|---|
| 218 | <vobj name = "preloader" type = "BUFFER" length = "0x00010000" /> |
|---|
| 219 | </vseg> |
|---|
| 220 | |
|---|
| 221 | <vseg name = "seg_ram_disk" vbase = "0x02000000" mode = "C_W_" x = "0" y = "0" psegname = "PSEG_RAM" ident = "1" > |
|---|
| 222 | <vobj name = "ramdisk" type = "BUFFER" length = "0x02000000" /> |
|---|
| 223 | </vseg> |
|---|
| 224 | |
|---|
| 225 | *** 4 global vsegs for replicated ICUS / A[31:24] = 0xF0 / Increment = 0x10000 / Identity mapping in cluster (0,0) |
|---|
| 226 | |
|---|
| 227 | <vseg name = "seg_icu_0" vbase = "0xF0000000" mode = "__W_" x = "0" y = "0" psegname = "PSEG_XCU" ident = "1" > |
|---|
| 228 | <vobj name = "icu_0" type = "PERI" length = "0x00001000" /> |
|---|
| 229 | </vseg> |
|---|
| 230 | <vseg name = "seg_icu_1" vbase = "0xF0010000" mode = "__W_" x = "0" y = "1" psegname = "PSEG_XCU" > |
|---|
| 231 | <vobj name = "icu_1" type = "PERI" length = "0x00001000" /> |
|---|
| 232 | </vseg> |
|---|
| 233 | <vseg name = "seg_icu_2" vbase = "0xF0100000" mode = "__W_" x = "1" y = "0" psegname = "PSEG_XCU" > |
|---|
| 234 | <vobj name = "icu_2" type = "PERI" length = "0x00001000" /> |
|---|
| 235 | </vseg> |
|---|
| 236 | <vseg name = "seg_icu_3" vbase = "0xF0110000" mode = "__W_" x = "1" y = "1" psegname = "PSEG_XCU" > |
|---|
| 237 | <vobj name = "icu_3" type = "PERI" length = "0x00001000" /> |
|---|
| 238 | </vseg> |
|---|
| 239 | |
|---|
| 240 | *** 4 global vsegs for replicated MMC / A[31:24] = 0xE0 / Increment = 0x10000 / Identity mapping in cluster 0 |
|---|
| 241 | |
|---|
| 242 | <vseg name = "seg_memc_0" vbase = "0xE0000000" mode = "__W_" x = "0" y = "0" psegname = "PSEG_MMC" ident = "1" > |
|---|
| 243 | <vobj name = "memc_0" type = "PERI" length = "0x00001000" /> |
|---|
| 244 | </vseg> |
|---|
| 245 | <vseg name = "seg_memc_1" vbase = "0xE0010000" mode = "__W_" x = "0" y = "1" psegname = "PSEG_MMC" > |
|---|
| 246 | <vobj name = "memc_1" type = "PERI" length = "0x00001000" /> |
|---|
| 247 | </vseg> |
|---|
| 248 | <vseg name = "seg_memc_2" vbase = "0xE0100000" mode = "__W_" x = "1" y = "0" psegname = "PSEG_MMC" > |
|---|
| 249 | <vobj name = "memc_2" type = "PERI" length = "0x00001000" /> |
|---|
| 250 | </vseg> |
|---|
| 251 | <vseg name = "seg_memc_3" vbase = "0xE0110000" mode = "__W_" x = "1" y = "1" psegname = "PSEG_MMC" > |
|---|
| 252 | <vobj name = "memc_3" type = "PERI" length = "0x00001000" /> |
|---|
| 253 | </vseg> |
|---|
| 254 | |
|---|
| 255 | *** 4 global vsegs for replicated schedulers / A[31:28] = 0xC / Increment = 0x10000 |
|---|
| 256 | |
|---|
| 257 | <vseg name = "seg_sched_0" vbase = "0xC0000000" mode = "C_W_" x = "0" y = "0" psegname = "PSEG_RAM" > |
|---|
| 258 | <vobj name = "sched_0" type = "SCHED" length = "0x00008000" /> |
|---|
| 259 | </vseg> |
|---|
| 260 | <vseg name = "seg_sched_1" vbase = "0xC0010000" mode = "C_W_" x = "0" y = "1" psegname = "PSEG_RAM" > |
|---|
| 261 | <vobj name = "sched_1" type = "SCHED" length = "0x00008000" /> |
|---|
| 262 | </vseg> |
|---|
| 263 | <vseg name = "seg_sched_2" vbase = "0xC0100000" mode = "C_W_" x = "1" y = "0" psegname = "PSEG_RAM" > |
|---|
| 264 | <vobj name = "sched_2" type = "SCHED" length = "0x00008000" /> |
|---|
| 265 | </vseg> |
|---|
| 266 | <vseg name = "seg_sched_3" vbase = "0xC0110000" mode = "C_W_" x = "1" y = "1" psegname = "PSEG_RAM" > |
|---|
| 267 | <vobj name = "sched_3" type = "SCHED" length = "0x00008000" /> |
|---|
| 268 | </vseg> |
|---|
| 269 | |
|---|
| 270 | </globalset> |
|---|
| 271 | |
|---|
| 272 | <vspaceset> |
|---|
| 273 | |
|---|
| 274 | *** For each vspace, the startname field is the name of the vobj containing the start_vector (entry point array) |
|---|
| 275 | *** For each task, the startid field define the task entry point as an index in the start_vector |
|---|
| 276 | *** For each task, the clusterid and proclocid arguments define the task static placement |
|---|
| 277 | *** For each task, the stackname field is the name of the vobj containing the task stack |
|---|
| 278 | *** For each task, the heapname field is the name of the vobj containing the task heap |
|---|
| 279 | |
|---|
| 280 | <vspace name = "sort" startname = "sort_data" > |
|---|
| 281 | <vseg name = "seg_sort_code" vbase = "0x00400000" mode = "CXWU" x = "1" y = "1" psegname = "PSEG_RAM" > |
|---|
| 282 | <vobj name = "sort_code" type = "ELF" length = "0x00010000" binpath = "build/sort/sort.elf" /> |
|---|
| 283 | </vseg> |
|---|
| 284 | <vseg name = "seg_sort_data" vbase = "0x00500000" mode = "C_WU" x = "1" y = "1" psegname = "PSEG_RAM" > |
|---|
| 285 | <vobj name = "sort_data" type = "ELF" length = "0x00010000" binpath = "build/sort/sort.elf" /> |
|---|
| 286 | </vseg> |
|---|
| 287 | <vseg name = "seg_sort_ptab" vbase = "0x00600000" mode = "C_W_" x = "1" y = "1" psegname = "PSEG_RAM" > |
|---|
| 288 | <vobj name = "sort_ptab" type = "PTAB" length = "0x00020000" align = "13" /> |
|---|
| 289 | </vseg> |
|---|
| 290 | <vseg name = "seg_sort_stack_0" vbase = "0x00200000" mode = "C_WU" x = "0" y = "0" psegname = "PSEG_RAM" > |
|---|
| 291 | <vobj name = "sort_stack_00" type = "BUFFER" length = "0x00010000" /> |
|---|
| 292 | <vobj name = "sort_stack_01" type = "BUFFER" length = "0x00010000" /> |
|---|
| 293 | <vobj name = "sort_stack_02" type = "BUFFER" length = "0x00010000" /> |
|---|
| 294 | <vobj name = "sort_stack_03" type = "BUFFER" length = "0x00010000" /> |
|---|
| 295 | <vobj name = "sort_heap_0" type = "BUFFER" length = "0x00040000" /> |
|---|
| 296 | </vseg> |
|---|
| 297 | <vseg name = "seg_sort_stack_1" vbase = "0x00280000" mode = "C_WU" x = "0" y = "1" psegname = "PSEG_RAM" > |
|---|
| 298 | <vobj name = "sort_stack_10" type = "BUFFER" length = "0x00010000" /> |
|---|
| 299 | <vobj name = "sort_stack_11" type = "BUFFER" length = "0x00010000" /> |
|---|
| 300 | <vobj name = "sort_stack_12" type = "BUFFER" length = "0x00010000" /> |
|---|
| 301 | <vobj name = "sort_stack_13" type = "BUFFER" length = "0x00010000" /> |
|---|
| 302 | <vobj name = "sort_heap_1" type = "BUFFER" length = "0x00040000" /> |
|---|
| 303 | </vseg> |
|---|
| 304 | <vseg name = "seg_sort_stack_2" vbase = "0x00300000" mode = "C_WU" x = "1" y = "0" psegname = "PSEG_RAM" > |
|---|
| 305 | <vobj name = "sort_stack_20" type = "BUFFER" length = "0x00010000" /> |
|---|
| 306 | <vobj name = "sort_stack_21" type = "BUFFER" length = "0x00010000" /> |
|---|
| 307 | <vobj name = "sort_stack_22" type = "BUFFER" length = "0x00010000" /> |
|---|
| 308 | <vobj name = "sort_stack_23" type = "BUFFER" length = "0x00010000" /> |
|---|
| 309 | <vobj name = "sort_heap_2" type = "BUFFER" length = "0x00040000" /> |
|---|
| 310 | </vseg> |
|---|
| 311 | <vseg name = "seg_sort_stack_3" vbase = "0x00380000" mode = "C_WU" x = "1" y = "1" psegname = "PSEG_RAM" > |
|---|
| 312 | <vobj name = "sort_stack_30" type = "BUFFER" length = "0x00010000" /> |
|---|
| 313 | <vobj name = "sort_stack_31" type = "BUFFER" length = "0x00010000" /> |
|---|
| 314 | <vobj name = "sort_stack_32" type = "BUFFER" length = "0x00010000" /> |
|---|
| 315 | <vobj name = "sort_stack_33" type = "BUFFER" length = "0x00010000" /> |
|---|
| 316 | <vobj name = "sort_heap_3" type = "BUFFER" length = "0x00040000" /> |
|---|
| 317 | </vseg> |
|---|
| 318 | |
|---|
| 319 | *** This vobj emulates a command line argument for the sort application |
|---|
| 320 | |
|---|
| 321 | <vseg name = "seg_params" vbase = "0x00100000" mode = "C_WU" x = "0" y = "0" psegname = "PSEG_RAM" > |
|---|
| 322 | <vobj name = "nb_thread" type = "CONST" length = "0x4" init = "16" /> |
|---|
| 323 | </vseg> |
|---|
| 324 | |
|---|
| 325 | <task name = "sort_00" x = "0" y = "0" proclocid = "0" stackname = "sort_stack_00" heapname = "sort_heap_0" startid = "0" /> |
|---|
| 326 | <task name = "sort_01" x = "0" y = "0" proclocid = "1" stackname = "sort_stack_01" heapname = "sort_heap_0" startid = "0" /> |
|---|
| 327 | <task name = "sort_02" x = "0" y = "0" proclocid = "2" stackname = "sort_stack_02" heapname = "sort_heap_0" startid = "0" /> |
|---|
| 328 | <task name = "sort_03" x = "0" y = "0" proclocid = "3" stackname = "sort_stack_03" heapname = "sort_heap_0" startid = "0" /> |
|---|
| 329 | |
|---|
| 330 | <task name = "sort_10" x = "0" y = "1" proclocid = "0" stackname = "sort_stack_10" heapname = "sort_heap_1" startid = "0" /> |
|---|
| 331 | <task name = "sort_11" x = "0" y = "1" proclocid = "1" stackname = "sort_stack_11" heapname = "sort_heap_1" startid = "0" /> |
|---|
| 332 | <task name = "sort_12" x = "0" y = "1" proclocid = "2" stackname = "sort_stack_12" heapname = "sort_heap_1" startid = "0" /> |
|---|
| 333 | <task name = "sort_13" x = "0" y = "1" proclocid = "3" stackname = "sort_stack_13" heapname = "sort_heap_1" startid = "0" /> |
|---|
| 334 | |
|---|
| 335 | <task name = "sort_20" x = "1" y = "0" proclocid = "0" stackname = "sort_stack_20" heapname = "sort_heap_2" startid = "0" /> |
|---|
| 336 | <task name = "sort_21" x = "1" y = "0" proclocid = "1" stackname = "sort_stack_21" heapname = "sort_heap_2" startid = "0" /> |
|---|
| 337 | <task name = "sort_22" x = "1" y = "0" proclocid = "2" stackname = "sort_stack_22" heapname = "sort_heap_2" startid = "0" /> |
|---|
| 338 | <task name = "sort_23" x = "1" y = "0" proclocid = "3" stackname = "sort_stack_23" heapname = "sort_heap_2" startid = "0" /> |
|---|
| 339 | |
|---|
| 340 | <task name = "sort_30" x = "1" y = "1" proclocid = "0" stackname = "sort_stack_30" heapname = "sort_heap_3" startid = "0" /> |
|---|
| 341 | <task name = "sort_31" x = "1" y = "1" proclocid = "1" stackname = "sort_stack_31" heapname = "sort_heap_3" startid = "0" /> |
|---|
| 342 | <task name = "sort_32" x = "1" y = "1" proclocid = "2" stackname = "sort_stack_32" heapname = "sort_heap_3" startid = "0" /> |
|---|
| 343 | <task name = "sort_33" x = "1" y = "1" proclocid = "3" stackname = "sort_stack_33" heapname = "sort_heap_3" startid = "0" /> |
|---|
| 344 | </vspace> |
|---|
| 345 | </vspaceset> |
|---|
| 346 | </mapping_info> |
|---|
![(please configure the [header_logo] section in trac.ini)](/trac/giet-vm/chrome/site/your_project_logo.png){kind=logo}
