Changeset 275 for soft/giet_vm

Timestamp:

Jan 21, 2014, 7:20:06 PM (11 years ago)

Author:

cfuguet

Message:

• Adding volatile attribute for pointers used to address memory mapped hardware registers.

• Removing the activation of interruptions before the execution of the ctx_switch function on the ioc_access function. This is to avoid been interrupted during the modification of task context variables.

Location:

soft/giet_vm

Files:

• giet_drivers/fbf_driver.c (modified) (1 diff)
• giet_drivers/ioc_driver.c (modified) (2 diffs)
• giet_drivers/xcu_driver.c (modified) (6 diffs)
• giet_kernel/ctx_handler.c (modified) (5 diffs)

soft/giet_vm/giet_drivers/fbf_driver.c

@@ -276 +276 @@
 #endif
 
-    // SYNC request for channel descriptor
-    _memc_sync( desc_paddr, 32 );
+    if ( USE_IOB )
+    {
+        // SYNC request for channel descriptor
+        _memc_sync( desc_paddr, 32 );
+    }
 
     // CMA channel activation

soft/giet_vm/giet_drivers/ioc_driver.c

@@ -155 +155 @@
     }
 
-    unsigned int * ioc_address = (unsigned int *) &seg_ioc_base ;
+    volatile unsigned int * ioc_address = (unsigned int *) &seg_ioc_base ;
 
     unsigned int length = count << 9;  // count * 512 bytes
@@ -358 +358 @@
         else             ioc_address[BLOCK_DEVICE_OP] = BLOCK_DEVICE_READ;
 
-        // Exit critical section 
-        _it_enable();
-
         // deschedule task
         _ctx_switch();                      

soft/giet_vm/giet_drivers/xcu_driver.c

@@ -72 +72 @@
 
 #if USE_XICU
-    unsigned int* xcu_address = (unsigned int *) ((unsigned int)&seg_xcu_base + 
-                                (cluster_xy * (unsigned int)&vseg_cluster_increment));
+    volatile unsigned int* xcu_address =
+        (unsigned int *) ((unsigned int)&seg_xcu_base + 
+        (cluster_xy * (unsigned int)&vseg_cluster_increment));
+
     unsigned int func;
     if      (irq_type == IRQ_TYPE_PTI) func = XICU_MSK_PTI_ENABLE;
@@ -109 +111 @@
 
 #if USE_XICU
-    unsigned int* xcu_address = (unsigned int *) ((unsigned int)&seg_xcu_base + 
-                                (cluster_xy * (unsigned int)&vseg_cluster_increment));
+    volatile unsigned int* xcu_address =
+        (unsigned int *) ((unsigned int)&seg_xcu_base + 
+        (cluster_xy * (unsigned int)&vseg_cluster_increment));
 
     unsigned int prio = xcu_address[XICU_REG(XICU_PRIO, proc_id)];
@@ -151 +154 @@
 
 #if USE_XICU
-    unsigned int* xcu_address = (unsigned int *) ((unsigned int)&seg_xcu_base + 
-                                 (cluster_xy * (unsigned int)&vseg_cluster_increment));
+    volatile unsigned int* xcu_address =
+        (unsigned int *) ((unsigned int)&seg_xcu_base + 
+        (cluster_xy * (unsigned int)&vseg_cluster_increment));
+
     xcu_address[XICU_REG(XICU_WTI_REG, proc_id)] = wdata;
     return 0; 
@@ -180 +185 @@
 
 #if USE_XICU
-    unsigned int* xcu_address = (unsigned int *) ((unsigned int)&seg_xcu_base + 
-                                (cluster_xy * (unsigned int)&vseg_cluster_increment));
+    volatile unsigned int* xcu_address =
+        (unsigned int *) ((unsigned int)&seg_xcu_base + 
+        (cluster_xy * (unsigned int)&vseg_cluster_increment));
+
     xcu_address[XICU_REG(XICU_PTI_PER, pti_index)] = period;
     return 0;
@@ -208 +215 @@
 
 #if USE_XICU
-    unsigned int * xcu_address = (unsigned int *) ((unsigned int)&seg_xcu_base + 
-                                 (cluster_xy * (unsigned int)&vseg_cluster_increment));
+    volatile unsigned int * xcu_address =
+        (unsigned int *) ((unsigned int)&seg_xcu_base + 
+        (cluster_xy * (unsigned int)&vseg_cluster_increment));
+
     xcu_address[XICU_REG(XICU_PTI_PER, pti_index)] = 0;
     return 0;
@@ -271 +280 @@
 
 #if USE_XICU
-    unsigned int * xcu_address = (unsigned int *) ((unsigned int) &seg_xcu_base + 
-                                 (cluster_xy * (unsigned int)&vseg_cluster_increment));
+    volatile unsigned int * xcu_address =
+        (unsigned int *) ((unsigned int) &seg_xcu_base + 
+        (cluster_xy * (unsigned int)&vseg_cluster_increment));
 
     unsigned int period = xcu_address[XICU_REG(XICU_PTI_PER, pti_index)];

soft/giet_vm/giet_kernel/ctx_handler.c

@@ -108 +108 @@
     if (curr_task_id != next_task_id) 
     {
+#if GIET_DEBUG_SWITCH
+_tty_get_lock( 0 );
+_puts("\n[GIET DEBUG] Context switch for processor ");
+_putd(_get_procid());
+_puts(" at cycle ");
+_putd(_get_proctime());
+_puts("\n");
+_puts(" - tasks        = ");
+_putd(tasks);
+_puts("\n");
+_puts(" - curr_task_id = ");
+_putd( curr_task_id );
+_puts("\n");
+_puts(" - next_task_id = ");
+_putd(next_task_id);
+_puts("\n");
+_tty_release_lock(  0 );
+#endif
+
         unsigned int* curr_ctx_vaddr = &(psched->context[curr_task_id][0]);
         unsigned int* next_ctx_vaddr = &(psched->context[next_task_id][0]);
@@ -113 +132 @@
         unsigned int local_id = procid % NB_PROCS_MAX;
         unsigned int cluster_id = procid / NB_PROCS_MAX;
-
-        // set current task index 
-        psched->current = next_task_id;
 
         // reset timer counter
@@ -124 +140 @@
 #endif
 
+        // set current task index 
+        psched->current = next_task_id;
+
         // makes context switch
         _task_switch(curr_ctx_vaddr, next_ctx_vaddr);
-
-#if GIET_DEBUG_SWITCH
-_tty_get_lock( 0 );
-_puts("\n[GIET DEBUG] Context switch for processor ");
-_putd(_get_procid());
-_puts(" at cycle ");
-_putd(_get_proctime());
-_puts("\n");
-_puts(" - tasks        = ");
-_putd(tasks);
-_puts("\n");
-_puts(" - curr_task_id = ");
-_putd( curr_task_id );
-_puts("\n");
-_puts(" - next_task_id = ");
-_putd(next_task_id);
-_puts("\n");
-_tty_release_lock(  0 );
-#endif
-
     }
 } //end _ctx_switch()
@@ -157 +156 @@
     while(1)
     {
+#if GIET_IDLE_TASK_VERBOSITY == 1
+        _tty_get_lock( 0 );
+        _puts("\n[GIET WARNING] Processor ");
+        _putd(_get_procid());
+        _puts(" idle at cycle ");
+        _putd(_get_proctime());
+        _puts("\n");
+        _tty_release_lock( 0 );
+#endif
+
         asm volatile(
                 "move   $3,   %0              \n"
@@ -167 +176 @@
                 : "$3" ); 
 
-#if GIET_IDLE_TASK_VERBOSITY == 1
-        _tty_get_lock( 0 );
-        _puts("\n[GIET WARNING] Processor ");
-        _putd(_get_procid());
-        _puts(" idle at cycle ");
-        _putd(_get_proctime());
-        _puts("\n");
-        _tty_release_lock( 0 );
-#endif
-
          count = GIET_IDLE_TASK_PERIOD;
     }