Changeset 530 for soft/giet_vm/giet_fat32

Timestamp:

Mar 27, 2015, 12:10:20 PM (10 years ago)

Author:

alain

Message:

1) The FAT library supports now only two modes to access the block device:

• synchronous: the calling task detect transfer completion by polling the block device status. This mode is used by the boot code.
• descheduling: The calling task is descheduled, and transfer completion is signaled by an IRQ. This mode is used by the kernel code to handle user system calls.

2) The generic IOC driver has been integrate in the FAT library: the _fat_ioc_access() function

select the proper driver (BDV,HBA,SDC,RDK), with the requested access mode.

Location:

soft/giet_vm/giet_fat32

Files:

• fat32.c (modified) (90 diffs)
• fat32.h (modified) (10 diffs)

soft/giet_vm/giet_fat32/fat32.c

@@ -5 +5 @@
 // Copyright (c) UPMC-LIP6
 //////////////////////////////////////////////////////////////////////////////////
-// The fat32.h and fat32.c files define a library of access functions
+// The fat.h and fat_common.c files define a library of access functions
 // to a FAT32 disk on a block device. It is intended to be used
 // by the GIET_VM nano-kernel for both the boot code and the kernel code.
-// This code uses functions defined in the utils.c and drivers.c files.
 //////////////////////////////////////////////////////////////////////////////////
 // Implementation notes:
@@ -15 +14 @@
 // 2. the "cluster" variable is actually a cluster index. A cluster contains
 //    typically 8 sectors (4K bytes) and the cluster index is a 32 bits word.
-// 2. This FAT32 library uses a FAT cache whose storage capacity is one
-//    sector (512 bytes, or 128 cluster indexes in FAT)
-// 3. This FAT32 library can be used in 3 modes: BOOT/BOOT/KERNEL/USER
-//    defining different behaviours for the IOC driver.
+// 3. This FAT32 library uses a FAT cache whose storage capacity is one
+//    sector (512 bytes = 128 cluster indexes in FAT)
 //////////////////////////////////////////////////////////////////////////////////
 
 #include <giet_config.h>
+#include <hard_config.h>
 #include <fat32.h>
+#include <utils.h>
+#include <vmem.h>
+#include <bdv_driver.h>
+#include <hba_driver.h>
+#include <sdc_driver.h>
+#include <rdk_driver.h>
+#include <mmc_driver.h>
 #include <tty0.h>
-#include <ioc_driver.h>
-#include <utils.h>
 
 //////////////////////////////////////////////////////////////////////////////////
@@ -31 +34 @@
 //////////////////////////////////////////////////////////////////////////////////
 
-extern fat32_fs_t fat __attribute__((aligned(512)));
+extern fat32_fs_t _fat;
+
+extern unsigned int _ptabs_vaddr[GIET_NB_VSPACE_MAX][X_SIZE][Y_SIZE];
+  
+//////////////////////////////////////////////////////////////////////////////
+// This function computes the memory buffer physical address, and calls 
+// the proper IOC driver depending on the subtype (BDV / HBA / SDC /RDK). 
+// The use_irq argument allows to activate the descheduling mode, if it 
+// supported by the IOC driver subtype
+//////////////////////////////////////////////////////////////////////////////
+// Return 0 in case of success, return -1 in case of error
+//////////////////////////////////////////////////////////////////////////////
+static
+int _fat_ioc_access( unsigned int use_irq,
+                     unsigned int to_mem,
+                     unsigned int lba,
+                     unsigned int buf_vaddr,
+                     unsigned int count ) 
+{
+    // compute memory buffer physical address
+    unsigned int       flags;         // for _v2p_translate
+    unsigned long long buf_paddr;     // buffer physical address 
+
+    if ( ((_get_mmu_mode() & 0x4) == 0 ) || USE_IOC_RDK )  // identity
+    {
+        buf_paddr = (unsigned long long)buf_vaddr;
+    }
+    else                                // V2P translation required
+    {
+        buf_paddr = _v2p_translate( buf_vaddr , &flags );
+    }
+
+#if (GIET_DEBUG_FAT > 1)
+unsigned int procid  = _get_procid();
+unsigned int x       = procid >> (Y_WIDTH + P_WIDTH);
+unsigned int y       = (procid >> P_WIDTH) & ((1<<Y_WIDTH)-1);
+unsigned int p       = procid & ((1<<P_WIDTH)-1);
+_printf("\n[DEBUG FAT] P[%d,%d,%d] enters _fat_ioc_access() at cycle %d\n"
+        "  to_mem = %d / vaddr = %x / paddr = %l / sectors = %d / lba = %x\n",
+        x, y , p, _get_proctime(), to_mem, buf_vaddr, buf_paddr, count, lba );
+#endif
+
+    // cache coherence for both L1 & L2 caches
+    if ( to_mem ) // memory write  
+    {
+        // L1 cache (only if L1 cache coherence not guaranteed by hardware)
+        if ( GIET_NO_HARD_CC ) _dcache_buf_invalidate( buf_vaddr, count<<9 );
+
+        // L2 cache (only if we use an IO-Bridge component in architecture))
+        if ( USE_IOB ) _mmc_inval( buf_paddr, count<<9 );
+    }
+    else         // memory read 
+    {
+        // L1 cache : nothing to do for L1 write-through
+
+        // L2 cache (only if we use an IO-Bridge component in architecture))
+        if ( USE_IOB ) _mmc_sync( buf_paddr, count<<9 );
+    }
+
+    // call the proper descheduling physical device driver 
+  
+#if   ( USE_IOC_BDV )
+    return( _bdv_access( use_irq , to_mem , lba , buf_paddr , count ) ); 
+#elif ( USE_IOC_HBA )
+    return( _hba_access( use_irq , to_mem , lba , buf_paddr , count ) );
+#elif ( USE_IOC_SPI )
+    return( _sdc_access( use_irq , to_mem , lba , buf_paddr , count ) );
+#elif ( USE_IOC_RDK )
+    return( _rdk_access( use_irq , to_mem , lba , buf_paddr , count ) );
+#else
+    _printf("\n[FAT ERROR] in _fat_ioc_access() : no IOC driver\n");
+    _exit();
+#endif
+
+}  // end _fat_ioc_access()
+
 
 //////////////////////////////////////////////////////////////////////////////////
 // This function displays the content of the FAT cache
 //////////////////////////////////////////////////////////////////////////////////
+#if (GIET_DEBUG_FAT > 1)
+static
 void _display_fat_cache()
 {
@@ -45 +125 @@
 
     _puts("\n*********************** fat_cache_lba = ");
-    _putx( fat.cache_lba );
+    _putx( _fat.cache_lba );
     _puts(" *****************************\n");
 
@@ -58 +138 @@
         {
             unsigned int byte  = (line<<5) + (word<<2);
-            unsigned int hexa  = (fat.fat_cache[byte  ]<<24) |
-                                 (fat.fat_cache[byte+1]<<16) |
-                                 (fat.fat_cache[byte+2]<< 8) |
-                                 (fat.fat_cache[byte+3]);
+            unsigned int hexa  = (_fat.fat_cache[byte  ]<<24) |
+                                 (_fat.fat_cache[byte+1]<<16) |
+                                 (_fat.fat_cache[byte+2]<< 8) |
+                                 (_fat.fat_cache[byte+3]);
             _putx( hexa );
             _puts(" | ");
 
             // prepare display ascii
-            temp[word] = fat.fat_cache[byte]         |
-                         (fat.fat_cache[byte+1]<<8)  |
-                         (fat.fat_cache[byte+2]<<16) |
-                         (fat.fat_cache[byte+3]<<24) ;
+            temp[word] = _fat.fat_cache[byte]         |
+                         (_fat.fat_cache[byte+1]<<8)  |
+                         (_fat.fat_cache[byte+2]<<16) |
+                         (_fat.fat_cache[byte+3]<<24) ;
         }
         
@@ -79 +159 @@
 
 } // end _display_fat_cache()  
+#endif
+
+//////////////////////////////////////////////////////////////////////////////////
+// This function displays the FAT descriptor.
+//////////////////////////////////////////////////////////////////////////////////
+#if GIET_DEBUG_FAT
+static
+void _fat_print()
+{
+    _printf("\n########################## FAT32 ################################"  
+            "\nFAT initialised                  %x"
+            "\nSector Size  (bytes)             %x"
+            "\nSectors per cluster              %x"
+            "\nFAT region first lba             %x"
+            "\nData region first lba            %x"
+            "\nNumber of sectors for one FAT    %x"
+            "\nNumber of free clusters          %x"
+            "\nLast allocated cluster           %x" 
+            "\n#################################################################\n",
+            _fat.initialised,
+            _fat.sector_size,
+            _fat.sectors_per_cluster,
+            _fat.fat_lba,
+            _fat.data_lba,
+            _fat.fat_sectors,
+            _fat.number_free_cluster,
+            _fat.last_cluster_allocated );
+} // end _fat_print()
+#endif
 
 //////////////////////////////////////////////////////////////////////////////////
@@ -84 +193 @@
 // by an (offset,length) mnemonic defined in fat32.h file.
 //////////////////////////////////////////////////////////////////////////////////
-static inline int get_length( int offset, 
-                              int length )
+static inline 
+int get_length( int offset, 
+                int length )
 {
     return length;
@@ -94 +204 @@
 // The modified field in buffer is defined by the offset and size arguments.
 //////////////////////////////////////////////////////////////////////////////
-static void _write_entry( unsigned int   offset,
-                         unsigned int   size,
-                         char*          buffer,
-                         unsigned int   value )
+static 
+void _write_entry( unsigned int   offset,
+                   unsigned int   size,
+                   char*          buffer,
+                   unsigned int   value )
 {
     unsigned int turn = 0;
@@ -116 +227 @@
 // The analysed field in buffer is defined by the offset and size arguments.
 //////////////////////////////////////////////////////////////////////////////
-static unsigned int _read_entry( unsigned int   offset,
-                                 unsigned int   size,
-                                 char*          buffer,
-                                 unsigned int   little_indian )
+static 
+unsigned int _read_entry( unsigned int   offset,
+                          unsigned int   size,
+                          char*          buffer,
+                          unsigned int   little_indian )
 {
     unsigned int turn;
@@ -156 +268 @@
 // The DATA region indexing starts a cluster 2.
 //////////////////////////////////////////////////////////////////////////////////
-static inline unsigned int lba_to_cluster( unsigned int lba )                   
-{
-   if (lba < fat.data_lba ) return 0;
-
-   return ( (lba - fat.data_lba) / fat.sectors_per_cluster) + 2; 
+static inline 
+unsigned int lba_to_cluster( unsigned int lba )                   
+{
+   if (lba < _fat.data_lba ) return 0;
+
+   return ( (lba - _fat.data_lba) / _fat.sectors_per_cluster) + 2; 
 }
 
@@ -167 +280 @@
 // from the cluster index. The cluster index must be larger than 2. 
 //////////////////////////////////////////////////////////////////////////////////
-static inline unsigned int cluster_to_lba( unsigned int cluster )       
+static inline 
+unsigned int cluster_to_lba( unsigned int cluster )       
 {
    if ( cluster < 2 ) return 0; 
 
-   return  (fat.sectors_per_cluster * (cluster - 2)) + fat.data_lba;
+   return  (_fat.sectors_per_cluster * (cluster - 2)) + _fat.data_lba;
 }
 
@@ -179 +293 @@
 // remark: a sector of FAT contains 128 cluster indexes.
 /////////////////////////////////////////////////////////////////////////////////
-static unsigned int _get_next_cluster( unsigned int mode,
-                                       unsigned int cluster )
+static 
+unsigned int _get_next_cluster( unsigned int use_irq,
+                                unsigned int cluster )
 {
     // compute lba of the sector containing the cluster index
-    unsigned int lba = fat.fat_lba + (cluster / 128);
-
-#if GIET_DEBUG_FAT
+    unsigned int lba = _fat.fat_lba + (cluster / 128);
+
+    if ( lba != _fat.cache_lba )      // miss in fat_cache
+    {
+        // access fat
+        if( _fat_ioc_access( use_irq,
+                             1,               // read
+                             lba, 
+                             (unsigned int)_fat.fat_cache,
+                             1 ) )            // one sector
+        {
+            _printf("[FAT_ERROR] in get_next_cluster_id() : cannot read block %x", 
+                    lba );
+            return 1;
+        }
+        _fat.cache_lba = lba;
+    }
+
+    unsigned int next = _read_entry( ((cluster % 128) * 4), 
+                                     4, 
+                                     _fat.fat_cache,
+                                     1 );
+#if (GIET_DEBUG_FAT > 1)
 unsigned int procid  = _get_procid();
 unsigned int x       = procid >> (Y_WIDTH + P_WIDTH);
 unsigned int y       = (procid >> P_WIDTH) & ((1<<Y_WIDTH)-1);
 unsigned int p       = procid & ((1<<P_WIDTH)-1);
-
-_printf("\n[FAT DEBUG] _get_next_cluster() : P[%d,%d,%d] enters for cluster %x\n",
-      x , y , p , cluster );
-#endif
-
-    if ( lba != fat.cache_lba )      // miss in fat_cache
-    {
-        // we cannot access fat in user mode
-        if( mode == IOC_USER_MODE ) mode = IOC_KERNEL_MODE;
-        
-        // access fat
-        if( _ioc_read( 0,                 // channel
-                       mode,              // mode for IOC driver
-                       lba,               // sector index 
-                       fat.fat_cache,     // fat cache
-                       1 ) )              // one sector
-        {
-            _printf("[FAT_ERROR] in get_next cluster_id() : cannot read block %x", lba );
-            return 1;
-        }
-        fat.cache_lba = lba;
-    
-#if (GIET_DEBUG_FAT > 1)
+_printf("\n[DEBUG FAT] P[%d,%d,%d] in _get_next_cluster() :  next = %x\n",
+        x , y , p , next );
 _display_fat_cache();
-#endif
-
-    }
-    unsigned int next = _read_entry( ((cluster % 128) * 4), 
-                                     4, 
-                                     fat.fat_cache,
-                                     1 );
-
-#if GIET_DEBUG_FAT
-_printf("\n[FAT DEBUG] _get_next_cluster() : P[%d,%d,%d] next cluster = %x\n", next );
 #endif
 
@@ -241 +345 @@
 // Return the '_' character if c is illegal
 ////////////////////////////////////////////////////////////////
-static unsigned char illegal_short(unsigned char c)
+static 
+unsigned char illegal_short(unsigned char c)
 {
    const unsigned char illegal_char [] =";+=[]’,\"*\\<>/?:|\0";
@@ -265 +370 @@
 // Return 0 if not legal SFN
 /////////////////////////////////////////////////////////////////////////////////
-static int is_short( char* string, 
-                     char* sfn_string)
+static 
+int is_short( char* string, 
+              char* sfn_string)
 {
     int s_size   = 0;
@@ -340 +446 @@
 // Return 1 if name found, Return 0 if NUL character found, 
 ///////////////////////////////////////////////////////////////////////
-static int get_name_from_path( char*          pathname,
-                               char*          name,
-                               unsigned int*  nb_read ) 
+static 
+int get_name_from_path( char*          pathname,
+                        char*          name,
+                        unsigned int*  nb_read )        
 {
     if ( pathname[*nb_read] == 0 ) return 0;
@@ -452 +559 @@
 } // end get_name_from_long()
 
-//////////////////////////////////////////////////////////////////////////////////////
+///////////////////////////////////////////////////////////////////////////////////
 // This function update a DIR_ENTRY, write a new value into a specific field 
 // (ex : DIR_FILE_SIZE, when we want update the file size after a fat_write)
 // Return 0 in case of success, > 0 if failure.
-//////////////////////////////////////////////////////////////////////////////////////
+///////////////////////////////////////////////////////////////////////////////////
 // TODO : make this function less complex
-//////////////////////////////////////////////////////////////////////////////////////
-static inline unsigned int update_entry( unsigned int fd_id, 
-                                         unsigned int field,
-                                         unsigned int size,
-                                         unsigned int value )
+///////////////////////////////////////////////////////////////////////////////////
+static inline 
+unsigned int _update_entry( unsigned int use_irq,
+                            unsigned int fd_id, 
+                            unsigned int field,
+                            unsigned int size,
+                            unsigned int value )
 {
     char dir_entry[32];   // buffer to store a full directory_entry
@@ -468 +577 @@
     char file_name[256];  // buffer to store the name (not pathname) of the file
 
-    char sfn_string[12]  = {[0 ... 10] = ' ', '\0'};       // buffer for a Short File Name
-    unsigned int lba     = fat.fd[fd_id].lba_dir_entry;    // Lba of file dir_entry
+    char sfn_string[12]  = {[0 ... 10] = ' ', '\0'};     // buffer Short File Name
+    unsigned int lba     = _fat.fd[fd_id].lba_dir_entry;  // Lba of file dir_entry
     unsigned int is_sfn;         
-    unsigned int attr    = 0;                              // directory entry attribute
-    unsigned int ord     = 0;                              // directory entry sequence
-    unsigned int found   = 0;                              // name found
-    unsigned int offset  = 0;                              // offset in fat_cache
+    unsigned int attr    = 0;                            // dir entry attribute
+    unsigned int ord     = 0;                            // dir entry sequence
+    unsigned int found   = 0;                            // name found
+    unsigned int offset  = 0;                            // offset in fat_cache
     unsigned int i       = 0;
     unsigned int nb_read = 0;
@@ -482 +591 @@
     
     // Get the name of the file.
-    while ( get_name_from_path( fat.fd[fd_id].name, file_name, &nb_read ) )
+    while ( get_name_from_path( _fat.fd[fd_id].name, file_name, &nb_read ) )
     {
     }
@@ -489 +598 @@
     is_sfn = is_short( file_name, sfn_string );
 
-    if ( _ioc_read( 0,               // channel
-                    IOC_KERNEL_MODE, // mode for IOC driver
-                    lba,             // sector index 
-                    fat.fat_cache,   // buffer address
-                    1 ) )            // one sector
-    {
-        _printf("\n[FAT ERROR] in update_entry() cannot read sector %x\n", lba );
+    // access FAT
+    if ( _fat_ioc_access( use_irq,
+                          1,               // read
+                          lba, 
+                          (unsigned int)_fat.fat_cache,
+                          1 ) )            // one sector
+    {
+        _printf("\n[FAT ERROR] in _update_entry() cannot read sector %x\n", 
+                lba );
         return 1;
     }
-    fat.cache_lba = lba;
+    _fat.cache_lba = lba;
 
     // - the offset increment is an integer number of directory entry (32 bytes)
@@ -504 +615 @@
     while ( !found )
     {
-        attr = _read_entry( DIR_ATTR, fat.fat_cache + offset, 0 );
-        ord  = _read_entry( LDIR_ORD, fat.fat_cache + offset, 0 );
+        attr = _read_entry( DIR_ATTR, _fat.fat_cache + offset, 0 );
+        ord  = _read_entry( LDIR_ORD, _fat.fat_cache + offset, 0 );
 
         if ( is_sfn == 1 )                                     // searched name is short
@@ -520 +631 @@
                     (ord  != NO_MORE_ENTRY ) )         // SFN entry : checked
             {
-                memcpy( dir_entry, fat.fat_cache + offset, DIR_ENTRY_SIZE );    
+                memcpy( dir_entry, _fat.fat_cache + offset, DIR_ENTRY_SIZE );    
             }
             else if (ord == NO_MORE_ENTRY )            // end of directory : return
             {
-                _printf("\n[FAT ERROR] in update_entry() : reaches end of directory\n");
+                _printf("\n[FAT ERROR] in _update_entry() : reaches end\n");
                 return 1;
             }
@@ -539 +650 @@
                     (ord != NO_MORE_ENTRY) )           // LFN entry : checked
             {
-                memcpy( dir_entry, fat.fat_cache + offset, DIR_ENTRY_SIZE );    
+                memcpy( dir_entry, _fat.fat_cache + offset, DIR_ENTRY_SIZE );    
             }
             else if ( (attr != ATTR_LONG_NAME_MASK) && 
@@ -550 +661 @@
             else if (ord == NO_MORE_ENTRY )                        // end of directory : return
             {
-                _printf("\n[FAT ERROR] in update_entry() reaches end of directory\n");
+                _printf("\n[FAT ERROR] in _update_entry() reaches end\n");
                 return 1;
             }
@@ -568 +679 @@
             if ( _strncmp( (char*)sfn_string, (char*)name_entry, 13 ) == 0 )
             {
-                _write_entry(offset + field, size, fat.fat_cache, value);
+                _write_entry(offset + field, size, _fat.fat_cache, value);
                 found = 1;
             }
@@ -581 +692 @@
 
             unsigned shift = ((ord & 0xf) - 1) * 13;
-            if ( _strncmp( (char*)(file_name + shift), (char*)name_entry, 13 ) == 0 )
+            if ( _strncmp( (char*)(file_name + shift), 
+                           (char*)name_entry, 13 ) == 0 )
             {
                 if ( (ord & 0xf) == 1 )
                 {
                     offset = offset + DIR_ENTRY_SIZE;
-                    _write_entry(offset + field, size, fat.fat_cache, value);
+                    _write_entry(offset + field, size, _fat.fat_cache, value);
                     found = 1;
                 }
@@ -599 +711 @@
     }
 
-    return _ioc_write( 0,                // channel
-                       IOC_KERNEL_MODE,  // mode
-                       lba,              // sector index
-                       fat.fat_cache,    // source buffer
-                       1 );              // one sector
-}
-//////////////////////////////////////////////////////////////////////////////////
-// This function update FS_INFO:
+    // write block to FAT
+    if ( _fat_ioc_access( use_irq,
+                          0,                // write
+                          lba, 
+                          (unsigned int)_fat.fat_cache, 
+                          1 ) )             // one sector
+    {
+        _printf("\n[FAT ERROR] in _update_entry() cannot write sector %x\n", 
+                lba );
+        return 1;
+    }
+
+    return 0;
+} // end _update_entry()
+
+
+//////////////////////////////////////////////////////////////////////////////////
+// This function update the FS_INFO block:
 // last cluster allocated and number of free cluster. 
 // Return 0 in case of success, > 0 if failure.
 //////////////////////////////////////////////////////////////////////////////////
-static inline unsigned int _update_fs_info( )
-{
-    unsigned int lba = fat.fs_info_lba;
-
-#if GIET_DEBUG_FAT
-_printf("\n[FAT DEBUG] _update_fs_info() : enters\n");
-#endif
-
-    if ( lba == fat.cache_lba )            // hit cache
-    {
-        _write_entry( FS_FREE_CLUSTER     , fat.fat_cache, fat.number_free_cluster );
-        _write_entry( FS_FREE_CLUSTER_HINT, fat.fat_cache, fat.last_cluster_allocated );
-    }
-    else                                   // miss cache
-    {
-        if ( _ioc_read( 0,                 // channel
-                        IOC_KERNEL_MODE,   // mode for IOC driver
-                        lba,               // sector index 
-                        fat.fat_cache,     // source buffer
-                        1 ) )              // one sector
-        {
-            _printf("\n[FAT_ERROR] in _update_fat() cannot read block %x\n", lba );
+static inline 
+unsigned int _update_fs_info( unsigned int use_irq )
+{
+    unsigned int lba = _fat.fs_info_lba;
+
+#if GIET_DEBUG_FAT
+_printf("\n[DEBUG FAT] _update_fs_info()\n");
+#endif
+
+    // update FAT cache in case of miss
+    if ( lba != _fat.cache_lba )
+    {
+        if ( _fat_ioc_access( use_irq,
+                              1,                 // read
+                              lba, 
+                              (unsigned int)_fat.fat_cache, 
+                              1 ) )              // one sector
+        {
+            _printf("\n[FAT_ERROR] in _update_fs_info() cannot read block\n");
             return 1;
         }
-        fat.cache_lba = lba;
-        _write_entry( FS_FREE_CLUSTER     , fat.fat_cache, fat.number_free_cluster );
-        _write_entry( FS_FREE_CLUSTER_HINT, fat.fat_cache, fat.last_cluster_allocated );
-    }
-    return _ioc_write( 0,                // channel
-                       IOC_KERNEL_MODE,  // mode    
-                       lba,              // sector index
-                       fat.fat_cache,    // source buffer
-                       1 );              // one sector
-}
+        _fat.cache_lba = lba;
+    }
+
+    _write_entry( FS_FREE_CLUSTER     , _fat.fat_cache, _fat.number_free_cluster );
+    _write_entry( FS_FREE_CLUSTER_HINT, _fat.fat_cache, _fat.last_cluster_allocated );
+   
+    // write bloc to FAT
+    if ( _fat_ioc_access( use_irq,
+                          0,                // write
+                          lba,
+                          (unsigned int)_fat.fat_cache, 
+                          1 ) )             // one sector
+    {
+        _printf("\n[FAT_ERROR] in _update_fs_info() cannot write block\n");
+        return 1;
+    }
+
+    return 0;
+}  // end _update_fs_info()
 
 //////////////////////////////////////////////////////////////////////////////////
@@ -650 +778 @@
 // Return 0 in case of success, > 0 if failure.
 //////////////////////////////////////////////////////////////////////////////////
-static inline unsigned int _update_fat( unsigned int cluster, 
-                                        unsigned int value  )
-{
-    unsigned int lba = fat.fat_lba + (cluster / 128);
-
-#if GIET_DEBUG_FAT
-_printf("\n[FAT DEBUG] _update_fat() : cluster = %x / value = %x\n", cluster, value );
-#endif
-
-    if ( lba == fat.cache_lba )            // hit cache
-    {
-        _write_entry( ((cluster % 128) << 2), 4, fat.fat_cache, value );
-    }
-    else                                   // miss cache
-    {
-        if ( _ioc_read( 0,                 // channel
-                        IOC_KERNEL_MODE,   // mode for IOC driver
-                        lba,               // sector index 
-                        fat.fat_cache,     // source buffer
-                        1 ) )              // one sector
-        {
-            _printf("\n[FAT_ERROR] in _update_fat() cannot read block %x\n", lba );
+static inline 
+unsigned int _update_fat( unsigned int use_irq,
+                          unsigned int cluster, 
+                          unsigned int value  )
+{
+    unsigned int lba = _fat.fat_lba + (cluster / 128);
+
+#if GIET_DEBUG_FAT
+_printf("\n[DEBUG FAT] _update_fat() : cluster = %x / value = %x\n", 
+        cluster, value );
+#endif
+
+    // update FAT cache in case of miss
+    if ( lba != _fat.cache_lba )  
+    {
+        if ( _fat_ioc_access( use_irq,
+                              1,                 // read
+                              lba, 
+                              (unsigned int)_fat.fat_cache, 
+                              1 ) )              // one sector
+        {
+            _printf("\n[FAT_ERROR] in _update_fat() cannot read block %x\n",
+                    lba );
             return 1;
         }
-        fat.cache_lba = lba;
-        _write_entry( ((cluster % 128) << 2), 4, fat.fat_cache, value );
-    }
-    return _ioc_write( 0,                // channel
-                       IOC_KERNEL_MODE,  // mode      
-                       lba,              // sector indexs
-                       fat.fat_cache,    // source buffer 
-                       1 );              // one sector
+        _fat.cache_lba = lba;
+    }
+
+    _write_entry( ((cluster % 128) << 2), 4, _fat.fat_cache, value );
+
+    // write bloc to FAT
+    if ( _fat_ioc_access( use_irq,
+                          0,                // write
+                          lba,
+                          (unsigned int)_fat.fat_cache,
+                          1 ) )             // one sector
+    {
+        _printf("\n[FAT_ERROR] in _update_fat() cannot write block %x\n",
+                lba );
+        return 1;
+    }
+
+    return 0;
 } // end update_fat()
 
@@ -689 +828 @@
 // return 0 if success, -1 if failure
 //////////////////////////////////////////////////////////////////////////////////
-static inline int _fat_allocate( unsigned int fd_id, 
-                                 unsigned int count )
-{
-    unsigned int next_cluster = fat.fd[fd_id].first_cluster;    // get first cluster
-    unsigned int cluster_to_allocate = count;                   // clusters to allocate
-    unsigned int last_cluster_file;                             // Last cluster (EOC)
-    unsigned int free_cluster = fat.last_cluster_allocated + 1; // First free cluster
+static inline 
+int _fat_allocate( unsigned int use_irq,
+                   unsigned int fd_id, 
+                   unsigned int count )
+{
+    unsigned int next_cluster = _fat.fd[fd_id].first_cluster;    // first cluster
+    unsigned int cluster_to_allocate = count;                   // to allocate
+    unsigned int last_cluster_file;                             // Last cluster 
+    unsigned int free_cluster = _fat.last_cluster_allocated + 1; // First free 
 
     // Check if free_cluster is really free (must be true)
-    if ( _get_next_cluster( IOC_KERNEL_MODE, free_cluster ) != FREE_CLUSTER)
+    if ( _get_next_cluster( use_irq , free_cluster ) != FREE_CLUSTER)
     {
         _printf("\n[FAT ERROR] in _fat_allocate() : first free cluster not free\n");
@@ -704 +845 @@
     }
     // Check if FAT contains enough cluster free for this allocation
-    if ( count > fat.number_free_cluster )
+    if ( count > _fat.number_free_cluster )
     {
         _printf("\n[FAT ERROR] in _fat_allocate() : Not enough free cluster(s)\n");
@@ -711 +852 @@
 
 #if GIET_DEBUG_FAT
-_printf("\n[FAT DEBUG] _fat_allocate() for fd = %d\n" fd_id );
+_printf("\n[DEBUG FAT] _fat_allocate() for fd = %d\n", fd_id );
 #endif
 
@@ -718 +859 @@
     {
         last_cluster_file = next_cluster;
-        next_cluster      = _get_next_cluster( IOC_KERNEL_MODE, next_cluster );
+        next_cluster      = _get_next_cluster( use_irq , next_cluster );
     }
     while ( next_cluster < END_OF_CHAIN_CLUSTER );
@@ -727 +868 @@
 
 #if GIET_DEBUG_FAT
-_printf("\n[FAT DEBUG] cluster to update = %x / free cluster = %x / nb_clusters %d\n",
+_printf("\n[DEBUG FAT] cluster to update = %x / free cluster = %x / count = %d\n",
         last_cluster_file , free_cluster , cluster_to_allocate );
 #endif
@@ -733 +874 @@
         // update, in the FAT, the value of last cluster allocated by the index
         // of free cluster.
-        if ( _update_fat( last_cluster_file, free_cluster ) )
+        if ( _update_fat( use_irq , last_cluster_file , free_cluster ) )
         {
             _printf("\n[FAT ERROR] in _fat_allocate() : update fat failed\n");
@@ -748 +889 @@
             // update, in the FAT, the value of the last cluster allocated by
             // END_OF_CHAIN_CLUSTER
-            if ( _update_fat( last_cluster_file, END_OF_CHAIN_CLUSTER ) )
+            if ( _update_fat( use_irq , last_cluster_file , END_OF_CHAIN_CLUSTER ) )
             {
                 _printf("\n[FAT ERROR] in _fat_allocate() : update fat failed\n");
@@ -758 +899 @@
 
         // Check if free_cluster is really free (must be true)
-        if ( _get_next_cluster( IOC_KERNEL_MODE, free_cluster ) != FREE_CLUSTER)
+        if ( _get_next_cluster( use_irq , free_cluster ) != FREE_CLUSTER)
         {
             _printf("\n[FAT ERROR] in _fat_allocate() : free_cluster not free\n");
@@ -767 +908 @@
     // Update field number_free_cluster and last_cluster_allocated 
     // of structure fat for next fat_allocate
-    fat.last_cluster_allocated = last_cluster_file;
-    fat.number_free_cluster    = fat.number_free_cluster - count;
-
-    if ( _update_fs_info() )
+    _fat.last_cluster_allocated = last_cluster_file;
+    _fat.number_free_cluster    = _fat.number_free_cluster - count;
+
+    if ( _update_fs_info( use_irq ) )
     {
         _printf("\n[FAT ERROR] in _fat_allocate() : update fs_info failed\n");
@@ -779 +920 @@
 }  // end _fat_allocate()
 
-////////////////////////////////////////////////////////////////////////////////////////
+//////////////////////////////////////////////////////////////////////////////////
 // This function read the blocks defined by the cluster index argument, in a data 
 // region containing a directory to search the name of a file/firectory. 
@@ -790 +931 @@
 // The cluster index is always stored in a SFN or LFN entry.
 // Return cluster index if name found / Return -1 if not found.
-////////////////////////////////////////////////////////////////////////////////////////
-static int _scan_directory( unsigned int   mode,            // mode for IOC driver
-                            unsigned int   cluster,         // cluster containing dir_entry 
-                            char*          file_name,       // searched file/directory name
-                            unsigned int*  file_size,       // file size
-                            unsigned int*  lba_dir_entry )  // lba of dir_entry
+//////////////////////////////////////////////////////////////////////////////////
+static 
+int _scan_directory( unsigned int   use_irq,         // use descheduling mode 
+                     unsigned int   cluster,         // cluster of dir_entry 
+                     char*          file_name,       // searched file/dir name
+                     unsigned int*  file_size,       // file size
+                     unsigned int*  lba_dir_entry )  // lba of dir_entry
 {
     char dir_entry[32];   // buffer to store a full directory_entry
     char name_entry[14];  // buffer to store a 13 characters (partial) name
 
-    char sfn_string[12]    = {[0 ... 10] = ' ', '\0'};        // buffer for Short File Name
-    unsigned int  is_sfn   = is_short(file_name, sfn_string); // if file_name is short
-    unsigned int  offset   = 0;                               // byte offset in block
-    unsigned int  block_id = fat.sectors_per_cluster;         // sector index initialisation
-    unsigned int  lba      = cluster_to_lba(cluster);         // lba of cluster containing dir
-    unsigned int  attr     = 0;                               // directory entry attribute
-    unsigned int  ord      = 0;                               // directory entry sequence
-    unsigned int  found    = 0;                               // searched name found
-    unsigned int  long_name_found = 0;                        // a matching XTN has been found
-    unsigned int  searched_cluster;                           // searched cluster index
+    char sfn_string[12]    = {[0 ... 10] = ' ', '\0'};  // buffer Short File Name
+    unsigned int  is_sfn   = is_short(file_name, sfn_string); // file_name is short
+    unsigned int  offset   = 0;                         // byte offset in block
+    unsigned int  block_id = _fat.sectors_per_cluster;   // sector index 
+    unsigned int  lba      = cluster_to_lba(cluster);   // lba of cluster 
+    unsigned int  attr     = 0;                         // dir entry attribute
+    unsigned int  ord      = 0;                         // dir entry sequence
+    unsigned int  found    = 0;                         // searched name found
+    unsigned int  long_name_found = 0;                  // matching XTN found
+    unsigned int  searched_cluster;                     // searched cluster index
 
 #if GIET_DEBUG_FAT
@@ -817 +959 @@
 unsigned int p       = procid & ((1<<P_WIDTH)-1);
 
-_printf("\n[FAT DEBUG] _scan_directory() : P[%d,%d,%d] enters for %s\n",
+_printf("\n[DEBUG FAT] P[%d,%d,%d] enters _scan_directory() for %s\n",
       x, y, p, file_name );
 #endif
@@ -827 +969 @@
     // load first sector from DATA region into FAT cache
     // other sectors will be loaded inside loop as required
-    if( _ioc_read( 0,               // channel
-                   mode,            // mode for IOC driver
-                   lba,             // sector index 
-                   fat.fat_cache,   // buffer address
-                   1 ) )            // one sector
-    {
-        _printf("[\nFAT ERROR] in _scan_directory() : cannot read sector %x\n", lba );
+    if( _fat_ioc_access( use_irq,
+                         1,               // read
+                         lba,
+                         (unsigned int)_fat.fat_cache,
+                         1 ) )            // one sector
+    {
+        _printf("[\nFAT ERROR] in _scan_directory() : cannot read sector %x\n",
+                lba );
         return -1;
     }
-
-    fat.cache_lba = lba;
+    _fat.cache_lba = lba;
 
 #if ( GIET_DEBUG_FAT > 1 )
@@ -858 +1000 @@
             else                                          // get next cluster
             {
-                cluster = _get_next_cluster( mode, cluster );
+                cluster = _get_next_cluster( use_irq , cluster );
 
                 if ( cluster >= END_OF_CHAIN_CLUSTER  ) return END_OF_CHAIN_CLUSTER;
 
                 lba      = cluster_to_lba(cluster);
-                block_id = fat.sectors_per_cluster;
-            }
-            if( _ioc_read( 0,               // channel
-                           mode,            // mode for IOC driver
-                           lba,             // sector index 
-                           fat.fat_cache,   // buffer address
-                           1 ) )            // one sector
-            {
-                _printf("\n[FAT ERROR] in _scan_directory() : cannot read sector %x\n", lba);
+                block_id = _fat.sectors_per_cluster;
+            }
+            if( _fat_ioc_access( use_irq,
+                                 1,               // read
+                                 lba, 
+                                 (unsigned int)_fat.fat_cache,
+                                 1 ) )            // one sector
+            {
+                _printf("\n[FAT ERROR] in _scan_directory() : cannot read sector %x\n",
+                        lba);
                 return -1;
             }
-            fat.cache_lba = lba;
+            _fat.cache_lba = lba;
             block_id--;
             offset = offset % 512;
@@ -882 +1025 @@
         // if it a possible candidate for the searched name
 
-        attr = _read_entry( DIR_ATTR, fat.fat_cache + offset, 0);   
-        ord  = _read_entry( LDIR_ORD, fat.fat_cache + offset, 0);
+        attr = _read_entry( DIR_ATTR, _fat.fat_cache + offset, 0);   
+        ord  = _read_entry( LDIR_ORD, _fat.fat_cache + offset, 0);
 
         if ( is_sfn == 1 )                                // searched name is short
@@ -897 +1040 @@
                       (ord  != NO_MORE_ENTRY ) )         // SFN entry : to be checked
             {
-                memcpy( dir_entry, fat.fat_cache + offset, DIR_ENTRY_SIZE );    
+                memcpy( dir_entry, _fat.fat_cache + offset, DIR_ENTRY_SIZE );    
 
                 get_name_from_short( dir_entry, name_entry );
@@ -922 +1065 @@
                 (ord != NO_MORE_ENTRY) )                 // EXT entry : to be checked
             {
-                memcpy( dir_entry, fat.fat_cache + offset, DIR_ENTRY_SIZE );
+                memcpy( dir_entry, _fat.fat_cache + offset, DIR_ENTRY_SIZE );
 
                 get_name_from_long( dir_entry, name_entry );
@@ -943 +1086 @@
                 if ( long_name_found )                   // LFN entry
                 {
-                    memcpy( dir_entry, fat.fat_cache + offset, DIR_ENTRY_SIZE );
+                    memcpy( dir_entry, _fat.fat_cache + offset, DIR_ENTRY_SIZE );
                     found = 1;
                 }
@@ -965 +1108 @@
 
 #if GIET_DEBUG_FAT
-_printf("\n[FAT DEBUG] _scan_directory() : P[%d,%d,%d] found %s"
+_printf("\n[DEBUG FAT] _scan_directory() : P[%d,%d,%d] found %s"
         " : cluster = %x\n", x, y, p, file_name, searched_cluster );
 #endif
@@ -999 +1142 @@
 // Return 0 if success, exit if failure 
 //////////////////////////////////////////////////////////////////////////
-int _fat_init( unsigned int mode )   // mode for IOC driver
-{
-    unsigned int   n;
+int _fat_init( unsigned int use_irq )  
+{
 
 #if GIET_DEBUG_FAT
@@ -1008 +1150 @@
 unsigned int y       = (procid >> P_WIDTH) & ((1<<Y_WIDTH)-1);
 unsigned int p       = procid & ((1<<P_WIDTH)-1);
-
-if ( mode == IOC_BOOT_MODE ) 
-_printf("\n[FAT DEBUG] _fat_init() : P[%d,%d,%d] enters in BOOT_MODE\n",x,y,p);
-if ( mode == IOC_KERNEL_MODE )
-_printf("\n[FAT DEBUG] _fat_init() : P[%d,%d,%d] enters in KERNEL_MODE\n",x,y,p);
-if ( mode == IOC_USER_MODE )
-_printf("\n[FAT DEBUG] _fat_init() : P[%d,%d,%d] enters in USER_MODE\n",x,y,p);
+_printf("\n[DEBUG FAT] P[%d,%d,%d] enters _fat_init\n",x,y,p);
 #endif
 
     // FAT initialisation should be done only once
-    if ( fat.initialised == FAT_INITIALISED )
-    {
-        _printf("\n[FAT WARNING] Strange, FAT already initialised...\n");
+    if ( _fat.initialised == FAT_INITIALISED )
+    {
+        _printf("\n[FAT ERROR] Strange, FAT already initialised...\n");
         _exit();
     }
 
     // load Boot Record (VBR) into fat cache
-    if ( _ioc_read( 0,                   // channel
-                    mode,                // mode for IOC driver
-                    0,                   // sector index
-                    fat.fat_cache,       // buffer address
-                    1 ) )                // one sector
+    if ( _fat_ioc_access( use_irq,
+                          1,                   // read
+                          0,                   // sector index
+                          (unsigned int)_fat.fat_cache,
+                          1 ) )                // one sector
     {
         _printf("\n[FAT ERROR] in _fat_init() cannot load VBR\n");
         _exit();
     }
-    fat.cache_lba = 0;
+    _fat.cache_lba = 0;
 
 #if GIET_DEBUG_FAT > 1
-_printf("\n[FAT DEBUG] _fat_init() : Boot Sector Loaded\n");
+_printf("\n[DEBUG FAT] _fat_init() : Boot Sector Loaded\n");
 _display_fat_cache();
 #endif
 
     // checking various FAT32 assuptions from boot sector
-    if( _read_entry( BPB_BYTSPERSEC, fat.fat_cache, 1 ) != 512 )
+    if( _read_entry( BPB_BYTSPERSEC, _fat.fat_cache, 1 ) != 512 )
     {
         _printf("\n[FAT ERROR] The sector size must be 512 bytes\n");
         _exit();
     }
-    if( _read_entry( BPB_NUMFATS, fat.fat_cache, 1 ) != 1 )
+    if( _read_entry( BPB_NUMFATS, _fat.fat_cache, 1 ) != 1 )
     {
         _printf("\n[FAT ERROR] The number of FAT copies in FAT region must be 1\n");
         _exit();
     }
-    if( (_read_entry( BPB_FAT32_FATSZ32, fat.fat_cache, 1 ) & 0xF) != 0 )
-    {
-        _printf("\n[FAT ERROR] The FAT region in FAT32 must be multiple of 32 sectors\n");
+    if( (_read_entry( BPB_FAT32_FATSZ32, _fat.fat_cache, 1 ) & 0xF) != 0 )
+    {
+        _printf("\n[FAT ERROR] The FAT region must be multiple of 32 sectors\n");
         _exit();
     }
-    if( _read_entry( BPB_FAT32_ROOTCLUS, fat.fat_cache, 1 ) != 2 )
+    if( _read_entry( BPB_FAT32_ROOTCLUS, _fat.fat_cache, 1 ) != 2 )
     {
         _printf("\n[FAT ERROR] The first cluster index must be 2\n");
@@ -1063 +1199 @@
     }
     // FS Info always in sector 1
-    fat.fs_info_lba         = _read_entry( BPB_FAT32_FSINFO, fat.fat_cache, 1 );
+    _fat.fs_info_lba         = _read_entry( BPB_FAT32_FSINFO, _fat.fat_cache, 1 );
 
     // initialise fat descriptor from VBR
-    fat.sectors_per_cluster = _read_entry( BPB_SECPERCLUS, fat.fat_cache, 1 );
-    fat.sector_size         = _read_entry( BPB_BYTSPERSEC, fat.fat_cache, 1 );
-    fat.cluster_size        = fat.sectors_per_cluster * 512;
-    fat.fat_sectors         = _read_entry( BPB_FAT32_FATSZ32, fat.fat_cache, 1 );
-    fat.fat_lba             = _read_entry( BPB_RSVDSECCNT, fat.fat_cache, 1 );
-    fat.data_lba            = fat.fat_lba + fat.fat_sectors;
-    fat.initialised         = FAT_INITIALISED;
+    _fat.sectors_per_cluster = _read_entry( BPB_SECPERCLUS, _fat.fat_cache, 1 );
+    _fat.sector_size         = _read_entry( BPB_BYTSPERSEC, _fat.fat_cache, 1 );
+    _fat.cluster_size        = _fat.sectors_per_cluster * 512;
+    _fat.fat_sectors         = _read_entry( BPB_FAT32_FATSZ32, _fat.fat_cache, 1 );
+    _fat.fat_lba             = _read_entry( BPB_RSVDSECCNT, _fat.fat_cache, 1 );
+    _fat.data_lba            = _fat.fat_lba + _fat.fat_sectors;
+    _fat.initialised         = FAT_INITIALISED;
 
     // initalise the lock protecting the FAT
-    _spin_lock_init( &fat.fat_lock );
+    _spin_lock_init( &_fat.fat_lock );
 
     // initialise file descriptor array
-    for( n = 0 ; n < GIET_OPEN_FILES_MAX ; n++ ) fat.fd[n].used = 0;
-
-#if GIET_DEBUG_FAT
-_printf("\n[FAT DEBUG] _fat_init() : FS_INFO Sector = %x\n", fat.fs_info_lba );
+    unsigned int   n;
+    for( n = 0 ; n < GIET_OPEN_FILES_MAX ; n++ ) _fat.fd[n].used = 0;
+
+#if GIET_DEBUG_FAT
+_printf("\n[DEBUG FAT] _fat_init() : FS_INFO Sector = %x\n", _fat.fs_info_lba );
 #endif
 
     // load FS_INFO into fat cache
-    if ( _ioc_read( 0,                  // channel
-                    mode,               // mode for IOC driver
-                    fat.fs_info_lba,    // sector index 
-                    fat.fat_cache,      // buffer address
-                    1 ) )               // one sector
+    if ( _fat_ioc_access( use_irq,
+                          1,                  // read
+                          _fat.fs_info_lba,    
+                          (unsigned int)_fat.fat_cache,
+                          1 ) )               // one sector
     { 
         _printf("\n[FAT ERROR] in _fat_init() cannot load FS_INFO Sector\n"); 
         _exit();
     }
-    fat.cache_lba = fat.fs_info_lba;
-
-    fat.number_free_cluster    = _read_entry( FS_FREE_CLUSTER     , fat.fat_cache, 1);
-    fat.last_cluster_allocated = _read_entry( FS_FREE_CLUSTER_HINT, fat.fat_cache, 1);
-
+    _fat.cache_lba = _fat.fs_info_lba;
+
+    _fat.number_free_cluster    = _read_entry( FS_FREE_CLUSTER     , _fat.fat_cache, 1);
+    _fat.last_cluster_allocated = _read_entry( FS_FREE_CLUSTER_HINT, _fat.fat_cache, 1);
 
 #if GIET_DEBUG_FAT
 _fat_print();
-_printf("\n[FAT DEBUG] P[%d,%d,%d] exit _fat_init()\n" );
+_printf("\n[DEBUG FAT] P[%d,%d,%d] exit _fat_init()\n", x,y,p );
 #endif
 
     return 0;
 }  // end _fat_init()
-
-/////////////////
-void _fat_print()
-{
-    _printf("\n########################## FAT32 ################################"  
-            "\nFAT initialised                  %x"
-            "\nSector Size  (bytes)             %x"
-            "\nSectors per cluster              %x"
-            "\nFAT region first lba             %x"
-            "\nData region first lba            %x"
-            "\nNumber of sectors for one FAT    %x"
-            "\nNumber of free clusters          %x"
-            "\nLast allocated cluster           %x" 
-            "\n#################################################################\n",
-            fat.initialised,
-            fat.sector_size,
-            fat.sectors_per_cluster,
-            fat.fat_lba,
-            fat.data_lba,
-            fat.fat_sectors,
-            fat.number_free_cluster,
-            fat.last_cluster_allocated );
-}
 
 ///////////////////////////////////////////////////////////////////////////////
@@ -1142 +1255 @@
 // Returns file descriptor index if success, returns -1 if error.
 ///////////////////////////////////////////////////////////////////////////////
-int _fat_open( unsigned     mode,
+int _fat_open( unsigned int use_irq,       // use descheduling mode if possible
                char*        pathname,
                unsigned int creat )
@@ -1160 +1273 @@
 unsigned int y       = (procid >> P_WIDTH) & ((1<<Y_WIDTH)-1);
 unsigned int p       = procid & ((1<<P_WIDTH)-1);
-
-_printf("\n[FAT DEBUG] P[%d,%d,%d] enters _fat_open() for path %s\n",
+_printf("\n[DEBUG FAT] P[%d,%d,%d] enters _fat_open() for path %s\n",
         x, y, p, pathname );
 #endif
@@ -1173 +1285 @@
 
     // checking FAT initialised
-    if( fat.initialised != FAT_INITIALISED )
+    if( _fat.initialised != FAT_INITIALISED )
     {
         _printf("\n[FAT ERROR] in _fat_open() : FAT not initialised\n");
@@ -1179 +1291 @@
     }
     // takes the FAT lock for exclusive access
-    _spin_lock_acquire( &fat.fat_lock );
-
-#if GIET_DEBUG_FAT
-_printf("\n[FAT DEBUG] _fat_open() : P[%d,%d,%d] takes the FAT lock\n",
+    _spin_lock_acquire( &_fat.fat_lock );
+
+#if GIET_DEBUG_FAT
+_printf("\n[DEBUG FAT] _fat_open() : P[%d,%d,%d] takes the FAT lock\n",
         x, y, p );
 #endif
@@ -1199 +1311 @@
 
 #if GIET_DEBUG_FAT
-_printf("\n[FAT DEBUG] _fat_open() : P[%d,%d,%d] search file/dir %s\n",
+_printf("\n[DEBUG FAT] _fat_open() : P[%d,%d,%d] search file/dir %s\n",
         x, y, p, name );
 #endif
@@ -1211 +1323 @@
 
         // scan current directory
-        cluster  = _scan_directory( mode, cluster, name, &file_size, &lba );
+        cluster = _scan_directory( use_irq , cluster , name , &file_size , &lba );
 
         if( cluster == END_OF_CHAIN_CLUSTER && last_name && creat )
@@ -1220 +1332 @@
         {
             _printf("\n[FAT ERROR] in _fat_open() cannot found %s\n", name );
-            _spin_lock_release( &fat.fat_lock );
+            _spin_lock_release( &_fat.fat_lock );
             return -1;
         }
@@ -1226 +1338 @@
 
 #if GIET_DEBUG_FAT
-_printf("\n[FAT DEBUG] _fat_open() : P[%d,%d,%d] cluster for %s = %x\n",
+_printf("\n[DEBUG FAT] P[%d,%d,%d] in _fat_open() : cluster for %s = %x\n",
        x, y, p, pathname, cluster );
 #endif
 
     // check the next value for cluster index found
-    unsigned next = _get_next_cluster( mode, cluster );
+    unsigned next = _get_next_cluster( use_irq , cluster );
 
     if ( (next != BAD_CLUSTER) && (next != FREE_CLUSTER) )
@@ -1237 +1349 @@
         // Search an empty slot scanning open file descriptors array
         fd_id = 0;
-        while ( fat.fd[fd_id].used != 0 && fd_id < GIET_OPEN_FILES_MAX )
+        while ( _fat.fd[fd_id].used != 0 && fd_id < GIET_OPEN_FILES_MAX )
         {
             fd_id++;
@@ -1245 +1357 @@
         if ( fd_id < GIET_OPEN_FILES_MAX )
         {
-            fat.fd[fd_id].used          = 1;
-            fat.fd[fd_id].first_cluster = cluster;
-            fat.fd[fd_id].file_size     = file_size;
-            fat.fd[fd_id].lba_dir_entry = lba;
-            _strcpy( fat.fd[fd_id].name, pathname );
-
-#if GIET_DEBUG_FAT
-_printf("\n[FAT DEBUG] _fat_open() : P[%d,%d,%d] exit : fd = %d for file %s\n",
+            _fat.fd[fd_id].used          = 1;
+            _fat.fd[fd_id].first_cluster = cluster;
+            _fat.fd[fd_id].file_size     = file_size;
+            _fat.fd[fd_id].lba_dir_entry = lba;
+            _strcpy( _fat.fd[fd_id].name, pathname );
+
+#if GIET_DEBUG_FAT
+_printf("\n[DEBUG FAT] _fat_open() : P[%d,%d,%d] exit : fd = %d for file %s\n",
         x, y, p, fd_id, pathname );
 #endif
 
             // release FAT lock
-            _spin_lock_release( &fat.fat_lock );
+            _spin_lock_release( &_fat.fat_lock );
 
             return fd_id;
@@ -1265 +1377 @@
             _printf("\n[FAT ERROR] in _fat_open() for file %s : fd array full\n", 
                     pathname );
-            _spin_lock_release( &fat.fat_lock );
+            _spin_lock_release( &_fat.fat_lock );
             return -1;
         }
@@ -1273 +1385 @@
         _printf("\n[FAT ERROR] in _fat_open() for file %s : bad cluster\n",
                 pathname );
-        _spin_lock_release( &fat.fat_lock );
+        _spin_lock_release( &_fat.fat_lock );
         return -1;
     }
@@ -1285 +1397 @@
 // Returns number of sectors transfered if success, < 0 if error.
 ///////////////////////////////////////////////////////////////////////////////
-int _fat_read( unsigned int mode,       // mode for IOC driver
+int _fat_read( unsigned int use_irq,    // use descheduling mode if possible
                unsigned int fd_id,      // file descriptor
                void*        buffer,     // target buffer base address
@@ -1291 +1403 @@
                unsigned int offset )    // nuber of sectors to skip in file
 {
-    unsigned int spc = fat.sectors_per_cluster;
+    unsigned int spc = _fat.sectors_per_cluster;
 
     unsigned int file_size;         // number of bytes in file
@@ -1306 +1418 @@
         return -1;
     }
-    if ( fat.fd[fd_id].used != 1 )
+    if ( _fat.fd[fd_id].used != 1 )
     {
         _printf("\n[FAT ERROR] in _fat_read() : file not open\n");
@@ -1318 +1430 @@
 
     // compute file size as a number of sectors 
-    file_size    = fat.fd[fd_id].file_size;
+    file_size    = _fat.fd[fd_id].file_size;
     if ( file_size & 0x1FF ) file_sectors = (file_size >> 9) + 1;
     else                     file_sectors = (file_size >> 9); 
@@ -1337 +1449 @@
     
     // get first cluster index 
-    cluster = fat.fd[fd_id].first_cluster;
+    cluster = _fat.fd[fd_id].first_cluster;
 
 #if GIET_DEBUG_FAT
@@ -1344 +1456 @@
 unsigned int y       = (procid >> P_WIDTH) & ((1<<Y_WIDTH)-1);
 unsigned int p       = procid & ((1<<P_WIDTH)-1);
-_printf("\n[FAT DEBUG] _fat_read() : P[%d,%d,%d] enters for file %s\n"
+_printf("\n[DEBUG FAT] _fat_read() : P[%d,%d,%d] enters for file %s\n"
         " - buffer vbase     = %x\n"
         " - skipped sectors  = %x\n"
@@ -1350 +1462 @@
         " - first cluster    = %x\n"
         " - skipped clusters = %x\n",
-        x, y, p, 
-        fat.fd[fd_id].name,
-        (unsigned int)buffer,
-        offset,
-        count,
-        cluster,
-        clusters_to_skip );
+        x, y, p, _fat.fd[fd_id].name, (unsigned int)buffer,
+        offset, count, cluster, clusters_to_skip );
 #endif
 
     // compute index of first cluster to be loaded
-    // as we may need to scan the FAT, we use the kernel mode
     while ( clusters_to_skip )
     {
-        cluster = _get_next_cluster( IOC_KERNEL_MODE, cluster );
+        cluster = _get_next_cluster( use_irq , cluster );
         clusters_to_skip--;
     }
@@ -1371 +1477 @@
     unsigned int    lba;            // first sector index on device
     unsigned int    iter_sectors;   // number of sectors to load in iteration
-    char*           dst;            // pointer on target buffer
+    unsigned int    dst;            // pointer on target buffer
 
     // initialize these variables for the first iteration 
     todo_sectors  = total_sectors;
-    dst           = (char*)buffer;
+    dst           = (unsigned int)buffer;
     lba           = cluster_to_lba(cluster) + sectors_to_skip;
     if( total_sectors < (spc - sectors_to_skip) ) iter_sectors = total_sectors;
@@ -1385 +1491 @@
 
 #if GIET_DEBUG_FAT
-_printf("\n[FAT DEBUG] _fat_read() : P[%d,%d,%d] makes an IOC read\n"
-        " - cluster = %x\n"
-        " - buffer  = %x\n"
-        " - lba     = %x\n"
-        " - sectors = %x\n",
-        x, y, p,
-        cluster,
-        (unsigned int)dst,
-        lba,
-        iter_sectors );
-#endif
-
-        if( _ioc_read( 0,                 // channel
-                       mode,              // mode for IOC driver
-                       lba,               // first sector index 
-                       dst,               // buffer address
-                       iter_sectors ) )   // number of sectors
+_printf("\n[DEBUG FAT] _fat_read() : P[%d,%d,%d] makes an IOC read\n"
+        "  cluster = %x / buffer = %x / lba = %x / sectors = %d\n",
+        x, y, p, cluster, dst, lba, iter_sectors );
+#endif
+
+        if( _fat_ioc_access( use_irq,
+                             1,                 // read
+                             lba, 
+                             dst,               // buffer address
+                             iter_sectors ) )   // number of sectors
         {
             _printf("\n[FAT ERROR] in _fat_read() cannot load block %x", lba );
@@ -1408 +1507 @@
          
         // update variables for next iteration
-        cluster      = _get_next_cluster( mode, cluster );
+        cluster      = _get_next_cluster( use_irq , cluster );
         todo_sectors = todo_sectors - iter_sectors;
         dst          = dst + (iter_sectors << 9);
@@ -1426 +1525 @@
 // Allocate new clusters if the offset+count larger than current file size,
 // but the offset should be smaller than the current file size...
-// - fat    : pointer on FAT 
-// - mode   : mode for the IOC driver
-// - fd_id  : open file descriptor index  
-// - buffer : base address of the memory buffer (must be sector aligned)
-// - offset : number of sectors to skip in file
-// - count  : number of sectors to be written.
 ///////////////////////////////////////////////////////////////////////////////
 // Returns number of sectors written if success, < 0 if error.
 ///////////////////////////////////////////////////////////////////////////////
-int _fat_write( unsigned int mode,       // mode for IOC driver
+int _fat_write( unsigned int use_irq,    // use descheduling mode if possible
                 unsigned int fd_id,      // file descriptor
                 void*        buffer,     // target buffer base address
@@ -1442 +1535 @@
 {
 
-    unsigned int spc = fat.sectors_per_cluster;
+    unsigned int spc = _fat.sectors_per_cluster;
 
     unsigned int file_size;         // number of bytes in file
@@ -1454 +1547 @@
 
     // compute file size as a number of sectors 
-    file_size    = fat.fd[fd_id].file_size;
+    file_size    = _fat.fd[fd_id].file_size;
     if ( file_size & 0x1FF ) file_sectors = (file_size >> 9) + 1;
     else                     file_sectors = (file_size >> 9); 
@@ -1473 +1566 @@
 unsigned int p       = procid & ((1<<P_WIDTH)-1);
 
-_printf("\n[FAT DEBUG] _fat_write() : P[%d,%d,%d] enters for file %s\n"
+_printf("\n[DEBUG FAT] _fat_write() : P[%d,%d,%d] enters for file %s\n"
         " - buffer vbase    = %x\n"
         " - skipped sectors = %x\n"
@@ -1479 +1572 @@
         " - file sectors    = %x\n"
         " - need_allocate   = %d\n",
-        x, y, p,
-        fat.fd[fd_id].name
-        (unsigned int)buffer,
-        offset,
-        count,
-        file_sectors,
-        allocate );
+        x, y, p, _fat.fd[fd_id].name, (unsigned int)buffer,
+        offset, count, file_sectors, allocate );
 #endif
 
@@ -1494 +1582 @@
         return -1;
     }
-    if ( fat.fd[fd_id].used != 1 )
+    if ( _fat.fd[fd_id].used != 1 )
     {
         _printf("\n[FAT ERROR] in _fat_write() : file not open\n");
@@ -1507 +1595 @@
     if ( allocate  )
     {
-        if ( _fat_allocate( fd_id, (required_cluster - current_cluster) ) < 0 )
+        if ( _fat_allocate( use_irq , fd_id, (required_cluster-current_cluster) ) )
         {
             _printf("\n[FAT ERROR] in _fat_write() : fat_allocate failed\n");
@@ -1519 +1607 @@
     
     // get first cluster index 
-    cluster = fat.fd[fd_id].first_cluster;
-
-#if GIET_DEBUG_FAT
-_printf("\n[FAT DEBUG] _fat_write() : P[%d,%d,%d] get cluster %x\n",
+    cluster = _fat.fd[fd_id].first_cluster;
+
+#if GIET_DEBUG_FAT
+_printf("\n[DEBUG FAT] _fat_write() : P[%d,%d,%d] get cluster %x\n",
         x, y, p, cluster );
 #endif
 
     // compute index of first cluster to be loaded
-    // as we may need to scan the FAT, we use the kernel mode
     while ( clusters_to_skip )
     {
-        cluster = _get_next_cluster( IOC_KERNEL_MODE, cluster );
+        cluster = _get_next_cluster( use_irq , cluster );
         clusters_to_skip--;
     }
@@ -1538 +1625 @@
     unsigned int    lba;            // first sector index on device
     unsigned int    iter_sectors;   // number of sectors to load in iteration
-    char*           src;            // pointer on target buffer
+    unsigned int    src;            // pointer on target buffer
 
     // initialize these variables for the first iteration 
     todo_sectors  = count;
-    src           = (char*)buffer;
+    src           = (unsigned int)buffer;
     lba           = cluster_to_lba(cluster) + sectors_to_skip;
     if( count < (spc - sectors_to_skip) ) iter_sectors = count;
@@ -1552 +1639 @@
 
 #if GIET_DEBUG_FAT
-_printf("\n[FAT DEBUG] _fat_write() : P[%d,%d,%d] makes an IOC write"
-        " - cluster  = %x\n"
-        " - buffer   = %x\n"
-        " - lba      = %x\n"
-        " - sectors  = %x\n",
-        x, y, p, 
-        cluster,
-        (unsigned int) src,
-        lba,
-        iter_sectors );
-#endif
-
-        if( _ioc_write( 0,                 // channel
-                        mode,              // mode for IOC driver
-                        lba,               // first sector index 
-                        src,               // source buffer address
-                        iter_sectors ) )   // number of sectors
+_printf("\n[DEBUG FAT] _fat_write() : P[%d,%d,%d] makes an IOC write"
+        "  cluster = %x / buffer = %x / lba = %x / sectors = %d\n",
+        x, y, p, cluster, src, lba, iter_sectors );
+#endif
+
+        if( _fat_ioc_access( use_irq,
+                             0,                 // write
+                             lba, 
+                             src,               // source buffer address
+                             iter_sectors ) )   // number of sectors
         {
             _printf("\n[FAT ERROR] in _fat_write() cannot write block %x\n", lba );
@@ -1575 +1655 @@
          
         // update variables for next iteration
-        cluster      = _get_next_cluster( mode, cluster );
+        cluster      = _get_next_cluster( use_irq , cluster );
         todo_sectors = todo_sectors - iter_sectors;
         src          = src + (iter_sectors << 9);
@@ -1587 +1667 @@
     if ( ( offset + count ) > file_sectors )
     {
-        fat.fd[fd_id].file_size = (count + offset) << 9;
+        _fat.fd[fd_id].file_size = (count + offset) << 9;
     }
 
     // Update entry of directory with the new value 
     // of file size (Field : DIR_FILE_SIZE)
-    if ( update_entry(fd_id, DIR_FILE_SIZE, fat.fd[fd_id].file_size) )
-    {
-            _printf("\n[FAT ERROR] in _fat_write() update entry failed\n");
-            return -1;
+    if ( _update_entry( use_irq, fd_id , DIR_FILE_SIZE , _fat.fd[fd_id].file_size ) )
+    {
+        _printf("\n[FAT ERROR] in _fat_write() update entry failed\n");
+        return -1;
     }
          
@@ -1615 +1695 @@
     if( (fd_id < GIET_OPEN_FILES_MAX) )
     {
-        file_size = fat.fd[fd_id].file_size;
+        file_size = _fat.fd[fd_id].file_size;
 
         if ( file_size & 0x1FF ) file_sectors = (file_size >> 9) + 1;
@@ -1638 +1718 @@
     if( (fd_id < GIET_OPEN_FILES_MAX) )
     {
-        fat.fd[fd_id].used = 0;
+        _fat.fd[fd_id].used = 0;
         return 0;
     }
@@ -1648 +1728 @@
 } // end fat_close()
 
-/////////////////////////////////////////////////////////////////////////////////////
+/////////////////////////////////////////////////////////////////////////////////
 // The following function implement the user_level system call.
 // The flags argument is not used, as file access modes are not implemented yet.
-/////////////////////////////////////////////////////////////////////////////////////
+/////////////////////////////////////////////////////////////////////////////////
 // Return the file descriptor index if success / return -1 if failure
-/////////////////////////////////////////////////////////////////////////////////////
+/////////////////////////////////////////////////////////////////////////////////
 int _fat_user_open( char*  pathname,         // absolute pathname from root
                     unsigned int flags )     // unused: TODO
 {
-    return _fat_open( IOC_KERNEL_MODE,       // we use KERNEL_MODE, because
-                      pathname,              // we need to write into FAT cache
-                      0 );                   // no creation if not found
+    return _fat_open( 1,        // use descheduling mode if possible
+                      pathname, 
+                      0 );      // no creation if not found
 }
 
-/////////////////////////////////////////////////////////////////////////////////////
+/////////////////////////////////////////////////////////////////////////////////
 // The following function implement the user_level system call.
-// This function should be modified to respect the UNIX specification 
-/////////////////////////////////////////////////////////////////////////////////////
+// This function should be modified to respect the UNIX specification.
+/////////////////////////////////////////////////////////////////////////////////
 // Return number of sectors actually transfered if success / return -1 if failure
-/////////////////////////////////////////////////////////////////////////////////////
+/////////////////////////////////////////////////////////////////////////////////
 int _fat_user_read( unsigned int fd,        // file descriptor index
                     void*        buffer,    // destination buffer
@@ -1673 +1753 @@
                     unsigned int offset )   // number of sectors to skip
 {
-    return _fat_read( IOC_USER_MODE,
+    return _fat_read( 1,        // use descheduling mode if possible
                       fd,
                       buffer,  
@@ -1680 +1760 @@
 }
 
-/////////////////////////////////////////////////////////////////////////////////////
+/////////////////////////////////////////////////////////////////////////////////
 // The following function implement the user_level system call.
 // This function should be modified to respect the UNIX specification. 
-/////////////////////////////////////////////////////////////////////////////////////
+/////////////////////////////////////////////////////////////////////////////////
 // Return number of sectors actually transfered if success / return -1 if failure
-/////////////////////////////////////////////////////////////////////////////////////
+/////////////////////////////////////////////////////////////////////////////////
 int _fat_user_write( unsigned int fd,       // file descriptor
                      void*        buffer,   // source buffer
@@ -1691 +1771 @@
                      unsigned int offset )  // number of sectors to skip on file
 {
-    return _fat_write( IOC_USER_MODE,
+    return _fat_write( 1,       // use descheduling mode if possible
                        fd,
                        buffer,  
@@ -1698 +1778 @@
 }
 
-/////////////////////////////////////////////////////////////////////////////////////
+/////////////////////////////////////////////////////////////////////////////////
 int _fat_user_lseek( unsigned int fd_id,
                      unsigned int offset,

soft/giet_vm/giet_fat32/fat32.h

@@ -1 @@
-////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////////
 // File     : fat32.h 
 // Date     : 01/09/2013
 // Author   : Marco Jankovic / Alain Greiner
 // Copyright (c) UPMC-LIP6
-////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////////
 
 #ifndef _FAT32_H
@@ -12 +12 @@
 #include "kernel_locks.h"
 
-/*************** Partition Boot Sector Format ******************************************/
+/*************** Partition Boot Sector Format **********************************/
 //                                     offset |  length
 #define BS_JMPBOOT                          0 ,  3
@@ -56 +56 @@
 #define FOURTH_PARTITION_BEGIN_LBA        502 ,  4
 #define FOURTH_PARTITION_SIZE             506 ,  4    
-/***************************************************************************************/
+/*******************************************************************************/
 
 #define MBR_SIGNATURE_POSITION            510 , 2
 #define MBR_SIGNATURE_VALUE               0xAA55  
 
-/************** FAT_FS_INFO SECTOR  ****************************************************/
+/************** FAT_FS_INFO SECTOR  ********************************************/
 #define FS_SIGNATURE_VALUE_1              0x52526141
 #define FS_SIGNATURE_VALUE_2              0x72724161
@@ -70 +70 @@
 #define FS_FREE_CLUSTER                   488 , 4
 #define FS_FREE_CLUSTER_HINT              492 , 4
-/***************************************************************************************/
+/*******************************************************************************/
 
 #define DIR_ENTRY_SIZE          32
                    
-/******* Directory Entry Structure (32 bytes) ******************************************/
+/******* Directory Entry Structure (32 bytes) **********************************/
 //                          offset | length
 #define DIR_NAME                 0 , 11   // dir_entry name
@@ -85 +85 @@
 #define DIR_FST_CLUS_LO         26 ,  2   // cluster index 16 LSB bit
 #define DIR_FILE_SIZE           28 ,  4   // file size (up to 4 giga bytes)
-/***************************************************************************************/
-
-/******* LFN Directory Entry Structure  (32 bytes) *************************************/
+/*******************************************************************************/
+
+/******* LFN Directory Entry Structure  (32 bytes) *****************************/
 //                          offset | length
 #define LDIR_ORD                 0 ,  1   // Sequence number (from 0x01 to 0x0f)    
@@ -97 +97 @@
 #define LDIR_RSVD               26 ,  2   // artifact of previous fat (must be 0)
 #define LDIR_NAME_3             28 ,  4   
-/***************************************************************************************/
-
-/***********************  DIR_ATTR values  (attributes) ********************************/
+/*******************************************************************************/
+
+/***********************  DIR_ATTR values  (attributes) ************************/
 #define ATTR_READ_ONLY          0x01
 #define ATTR_HIDDEN             0x02
@@ -107 +107 @@
 #define ATTR_ARCHIVE            0x20
 #define ATTR_LONG_NAME_MASK     0x0f      // READ_ONLY|HIDDEN|SYSTEM|VOLUME_ID
-/***************************************************************************************/
-
-/********************* DIR_ORD special values ******************************************/
+/*******************************************************************************/
+
+/********************* DIR_ORD special values **********************************/
 #define FREE_ENTRY              0xE5     // this entry is free in the directory
 #define NO_MORE_ENTRY           0x00     // no more entry in the directory
-/***************************************************************************************/
-
-/******************** CLuster Index Special Values *************************************/
+/*******************************************************************************/
+
+/******************** CLuster Index Special Values *****************************/
 #define FREE_CLUSTER            0x00000000
 #define RESERVED_CLUSTER        0x00000001
 #define BAD_CLUSTER             0x0FFFFFF7
 #define END_OF_CHAIN_CLUSTER    0x0ffffff8
-/***************************************************************************************/
+/*******************************************************************************/
 
 #define FAT_INITIALISED         0xBABEF00D
 
-/************ This struct defines a file descriptor ************************************/
+/************ This struct defines a file descriptor ****************************/
 typedef struct file_descriptor_s
 {
@@ -132 +132 @@
    char          name[244];                 // pathname
 }  file_desc_t;
-/***************************************************************************************/
-
-/************ This struct describes a FAT32 disk **********************************/
+/*******************************************************************************/
+
+/************ This struct describes a FAT32 disk *******************************/
 typedef struct fat32_fs_s
 {
-    char            fat_cache[512];          // FAT cache: 1 sector = 128 cluster indexes 
+    char            fat_cache[512];          // FAT cache: 1 sector  
     spin_lock_t     fat_lock;                // lock protecting exclusive access
     file_desc_t     fd[GIET_OPEN_FILES_MAX]; // file descriptors array
-    unsigned int    initialised;             // contains 0xBABEF00D when FAT initialised
+    unsigned int    initialised;             // 0xBABEF00D when FAT initialised
     unsigned int    sector_size;             // number of bytes (power of 2)
     unsigned int    sectors_per_cluster;     // power of 2 (must be greater than 4)
-    unsigned int    cluster_size;            // sector_size * sector_per_cluster (bytes)
-    unsigned int    fat_sectors;             // number of sectors occupied by one FAT copy
+    unsigned int    cluster_size;            // sector_size * sector_per_cluster 
+    unsigned int    fat_sectors;             // number of sectors for 1 FAT copy
     unsigned int    fat_lba;                 // lba of first FAT sector
     unsigned int    data_lba;                // lba of first data sector  
@@ -152 +152 @@
     unsigned int    fs_info_lba;             // lba of fs_info
 } fat32_fs_t;
-/***************************************************************************************/
-
-/*********************** Export Functions  *********************************************/
-
-extern void _fat_print();
-
-// functions used for low level access to fat
-// (move sectors between block device and system buffers)
-
-extern int _fat_init(  unsigned int mode );        // mode for IOC driver
-
-extern int _fat_open(  unsigned int mode,          // mode for IOC driver
-                       char*  pathname,            // file pathname from root
-                       unsigned int create );      // create new file if non zero
-
-extern int _fat_read(  unsigned int mode,          // mode for IOC driver
-                       unsigned int fd_id,         // file descriptor index 
-                       void*        buffer,        // destination buffer
-                       unsigned int count,            // number of sectors to read
-                       unsigned int offset );      // offset sector in file
-
-extern int _fat_write( unsigned int mode,         // mode for IOC driver
-                       unsigned int fd_id,        // file descriptor index
-                       void*        buffer,               // source buffer
-                       unsigned int count,        // number of sectors to write
-                       unsigned int offset );     // offset sector in file
-
-extern int _fat_fstat( unsigned int fd_id );      // file descriptor index
-
-extern int _fat_close( unsigned int fd_id );      // file descriptor index
-
-
-// functions used by user system calls
-// (should move bytes between system buffers and user buffers) 
-
-extern int _fat_user_open(  char*        pathname,  // file pathname from root
-                            unsigned int flags );   // unused
+/*******************************************************************************/
+
+/*********************** Extern Functions  *************************************/
+
+extern int _fat_init( unsigned int use_irq );       // use IRQ if possible
+
+extern int _fat_open(  unsigned int use_irq,        // use IRQ if possible
+                       char*  pathname,             // file pathname from root
+                       unsigned int create );       // create new file if non zero
+
+extern int _fat_read(  unsigned int use_irq,        // use IRQ if possible
+                       unsigned int fd_id,          // file descriptor index 
+                       void*        buffer,         // destination buffer
+                       unsigned int count,          // number of sectors to read
+                       unsigned int offset );       // offset sector in file
+
+extern int _fat_write( unsigned int use_irq,        // use IRQ if possible
+                       unsigned int fd_id,          // file descriptor index
+                       void*        buffer,                 // source buffer
+                       unsigned int count,          // number of sectors to write
+                       unsigned int offset );       // offset sector in file
+
+extern int _fat_fstat( unsigned int fd_id );        // file descriptor index
+
+extern int _fat_close( unsigned int fd_id );        // file descriptor index
+
+
+extern int _fat_user_open( char*        pathname,   // file pathname from root
+                           unsigned int flags );    // unused
 
 extern int _fat_user_read(  unsigned int fd_id,     // file descriptor index
                             void*        buffer,    // destination buffer
                             unsigned int count,     // number of sectors to read
-                            unsigned int offset );  // number of sectors to skip in file
+                            unsigned int offset );  // sectors to skip in file
 
 extern int _fat_user_write( unsigned int fd_id,     // file descriptor index
                             void*        buffer,    // source buffer
                             unsigned int count,     // number of sectors to write
-                            unsigned int offset );  // number of sectors to skip in file
+                            unsigned int offset );  //  sectors to skip in file
 
 extern int _fat_user_lseek( unsigned int fd_id,
@@ -204 +196 @@
                             unsigned int whence );  
 
-/***************************************************************************************/
+/*******************************************************************************/