Changes between Version 56 and Version 57 of WikiStart

Timestamp:

Nov 5, 2014, 12:47:28 PM (10 years ago)

Author:

alain

Comment:

--

WikiStart

@@ -3 +3 @@
 The GIET_VM is a fully '''static operating system''' for shared address space, many-cores architectures. These architectures are generally  NUMA (Non Uniform memory Acces), because the memory is logically shared, but physically distributed, and the main goal of the GIET_VM is to address these NUMA issues. 
 
-The GIET-VM assumes that there is one physical memory bank, and several processor cores per cluster. Each processor is identified by a composite index [x,y,p] where (x,y) are the cluster coordinates, and p is the local processor index. 
+The GIET-VM assumes that the hardware architecture is structured as a 2D mesh of ''clusters''. There is one physical memory bank, and several processor cores per cluster. Each processor is identified by a composite index [x,y,p] where x, y are the cluster coordinates, and p is the local processor index. 
 
-It is written for the MIPS32 processor. The virtual adresses are on 32 bits and use the (unsigned int) type, but the physicals addresses can have up to 40 bits, and use the (unsigned long long) type. 
+It is written for the MIPS32 processor. The virtual adresses are on 32 bits and use the (unsigned int) type, but the physicals addresses can have up to 40 bits, and use the (unsigned long long) type.
+
+The target architecture is generic, and the parameter values (such as the number of clusters, or the number of cores per cluster) are defined in the [source:soft/giet_vm/hard_config.h hard_config.h] file. The GIET-VM itself has configuration parameters that are defined in the [source:soft/giet_vm/giet_config.h giet_config.h] file.
 
 == __A) [wiki:mapping_info Mapping]__ ==
+
+Both the target hardware architecture and the mapping directives (placement of software tasks on the physical processors / placement of the software objects on the physical memory banks) must be described in a python script. This section describes the Python constructs used to describe the mapping.
 
 == __B) [wiki:boot_loader Boot-loader]__ ==