Changeset 64 for trunk/IPs/systemC

Timestamp:

Dec 4, 2007, 8:02:53 PM (17 years ago)

Author:

rosiere

Message:

test du Register_unit

Location:

trunk/IPs/systemC/processor/Morpheo/Behavioural

Files:

• Core/Multi_Execute_loop/Execute_loop/Register_unit/SelfTest/configuration.cfg (modified) (1 diff)
• Core/Multi_Execute_loop/Execute_loop/Register_unit/SelfTest/src/test.cpp (modified) (4 diffs)
• Makefile.flags (modified) (1 diff)

trunk/IPs/systemC/processor/Morpheo/Behavioural/Core/Multi_Execute_loop/Execute_loop/Register_unit/SelfTest/configuration.cfg

@@ -1 +1 @@
 Register_unit
-1       1       *2      #_nb_ooo_engine            
-32      32      *2      #_size_general_data        
-32      32      *2      #_size_special_data        
-1       1       *2      #_nb_gpr_read              
-1       1       *2      #_nb_gpr_write             
-1       1       *2      #_nb_gpr_bank              
-1       1       *2      #_nb_gpr_port_read_by_bank 
-1       1       *2      #_nb_gpr_port_write_by_bank
-1       1       *2      #_nb_spr_read              
-1       1       *2      #_nb_spr_write             
-1       1       *2      #_nb_spr_bank              
-1       1       *2      #_nb_spr_port_read_by_bank 
-1       1       *2      #_nb_spr_port_write_by_bank
-32      32      *2      #_nb_general_register [0]     
-32      32      *2      #_nb_special_register [0]     
-1       1       *2      #_nb_inst_insert_rob  [0]     
-1       1       *2      #_nb_inst_retire_rob  [0]     
+1       1       *4      #_nb_ooo_engine            
+32      32      *4      #_size_general_data        
+2       2       *4      #_size_special_data        
+1       1       *4      #_nb_gpr_read              
+1       1       *4      #_nb_gpr_write             
+1       1       *4      #_nb_gpr_bank              
+1       1       *4      #_nb_gpr_port_read_by_bank 
+1       1       *4      #_nb_gpr_port_write_by_bank
+1       1       *4      #_nb_spr_read              
+1       1       *4      #_nb_spr_write             
+1       1       *4      #_nb_spr_bank              
+1       1       *4      #_nb_spr_port_read_by_bank 
+1       1       *4      #_nb_spr_port_write_by_bank
+32      32      *4      #_nb_general_register [0]     
+32      32      *4      #_nb_special_register [0]     
+1       1       *4      #_nb_inst_insert_rob  [0]     
+1       1       *4      #_nb_inst_retire_rob  [0]     

trunk/IPs/systemC/processor/Morpheo/Behavioural/Core/Multi_Execute_loop/Execute_loop/Register_unit/SelfTest/src/test.cpp

@@ -11 +11 @@
 
 #define NB_ITERATION  1
-#define CYCLE_MAX     (128*NB_ITERATION)
+#define CYCLE_MAX     (10240*NB_ITERATION)
 
 #define LABEL(str)                                                                       \
@@ -340 +340 @@
 
   // Initialisation
+  uint32_t        max_nb_general_register = 0;
+
+  for (uint32_t i=0; i<_param->_nb_ooo_engine; i++)
+    if (_param->_nb_general_register [i] > max_nb_general_register)
+      max_nb_general_register = _param->_nb_general_register [i];
+
+  uint32_t        max_nb_special_register = 0;
+
+  for (uint32_t i=0; i<_param->_nb_ooo_engine; i++)
+    if (_param->_nb_special_register [i] > max_nb_special_register)
+      max_nb_special_register = _param->_nb_special_register [i];
+
+  const  int32_t percent_transaction_read       = 70;
+  const  int32_t percent_transaction_write      = 70;
+  const  int32_t percent_transaction_insert     = 70;
+  const  int32_t percent_transaction_insert_use = 70;
+  const  int32_t percent_transaction_retire     = 70;
+  const  int32_t percent_transaction_retire_use = 70;
+  const uint32_t nb_request                     = max_nb_general_register;
 
   const uint32_t seed = 0;
@@ -346 +365 @@
   srand(seed);
 
+  Tgeneral_data_t    gpr        [_param->_nb_ooo_engine][max_nb_general_register];
+  Tcontrol_t         gpr_status [_param->_nb_ooo_engine][max_nb_general_register];
+  Tspecial_data_t    spr        [_param->_nb_ooo_engine][max_nb_special_register];
+  Tcontrol_t         spr_status [_param->_nb_ooo_engine][max_nb_special_register];
+
   SC_START(0);
 
   LABEL("Initialisation");
+
+  for (uint32_t i=0; i<_param->_nb_gpr_read ; i++)
+    in_GPR_READ_VAL  [i]->write(0);
+  for (uint32_t i=0; i<_param->_nb_gpr_write; i++)
+    in_GPR_WRITE_VAL [i]->write(0);
+  for (uint32_t i=0; i<_param->_nb_spr_read ; i++)
+    in_SPR_READ_VAL  [i]->write(0);
+  for (uint32_t i=0; i<_param->_nb_spr_write; i++)
+    in_SPR_WRITE_VAL [i]->write(0);
+  for (uint32_t i=0; i<_param->_nb_ooo_engine; i++)
+    {
+      for (uint32_t j=0; j<_param->_nb_inst_insert_rob [i]; j++)
+        in_INSERT_ROB_VAL [i][j]->write(0);
+      for (uint32_t j=0; j<_param->_nb_inst_retire_rob [i]; j++)
+        in_RETIRE_ROB_VAL [i][j]->write(0);
+    }
+      
+  Tgeneral_address_t gpr_address [_param->_nb_gpr_write];
+  Tgeneral_address_t gpr_address_next;
+  uint32_t           nb_port_gpr_active; // number of port active
+
+  Tspecial_address_t spr_address [_param->_nb_spr_write];
+  Tspecial_address_t spr_address_next;
+  uint32_t           nb_port_spr_active; // number of port active
 
   LABEL("Loop of Test");
@@ -356 +404 @@
       LABEL("Iteration "+toString(iteration));
 
-      SC_START(1);
+      LABEL("(GPR) Write default value");
+
+      for (uint32_t i=0; i<_param->_nb_ooo_engine; i++)
+        for(uint32_t j=0; j<max_nb_general_register; j++)
+          {
+            gpr        [i][j] = rand()%_param->_size_general_data;
+            gpr_status [i][j] = 1;
+          }
+
+      for (uint32_t i=0; i<_param->_nb_ooo_engine; i++)
+        {
+          gpr_address_next   = _param->_nb_gpr_write;
+          nb_port_gpr_active = _param->_nb_gpr_write;
+          
+          for (uint32_t j=0; j<_param->_nb_gpr_write; j++)
+            {
+              gpr_address[j] = j;
+              if (j >= _param->_nb_general_register [i])
+                nb_port_gpr_active --;
+            }
+          
+          while (nb_port_gpr_active > 0)
+            {
+              for (uint32_t j=0; j<_param->_nb_gpr_write; j++)
+                {
+                  in_GPR_WRITE_VAL           [j]->write((gpr_address[j] < _param->_nb_general_register [i]) and
+                                                        ((rand() % 100) < percent_transaction_write));
+                  in_GPR_WRITE_OOO_ENGINE_ID [j]->write(i);
+                  in_GPR_WRITE_NUM_REG       [j]->write(gpr_address[j]);
+                  in_GPR_WRITE_DATA          [j]->write(gpr [i][gpr_address[j]]);
+                }
+              
+              SC_START(1);
+
+              // Test if write
+              for (uint32_t j=0; j<_param->_nb_gpr_write; j++)
+                if (in_GPR_WRITE_VAL [j]->read() and out_GPR_WRITE_ACK [j]->read())
+                  {
+                    gpr_address[j] = gpr_address_next;
+
+                    if (gpr_address_next >= _param->_nb_general_register [i])
+                      nb_port_gpr_active --;                
+                    
+                    gpr_address_next ++;
+                  }
+            }
+        }
+      
+      for (uint32_t i=0; i<_param->_nb_gpr_write; i++)
+        in_GPR_WRITE_VAL [i]->write(0);
+
+      LABEL("(GPR) Read - and test data writted");
+      
+      for (uint32_t i=0; i<_param->_nb_ooo_engine; i++)
+        {
+          gpr_address_next   = _param->_nb_gpr_read;
+          nb_port_gpr_active = _param->_nb_gpr_read;
+          
+          for (uint32_t j=0; j<_param->_nb_gpr_read; j++)
+            {
+              gpr_address[j] = j;
+              if (j >= _param->_nb_general_register [i])
+                nb_port_gpr_active --;
+            }
+          
+          while (nb_port_gpr_active > 0)
+            {
+              for (uint32_t j=0; j<_param->_nb_gpr_read; j++)
+                {
+                  in_GPR_READ_VAL           [j]->write((gpr_address[j] < _param->_nb_general_register [i]) and
+                                                       ((rand() % 100) < percent_transaction_read));
+                  in_GPR_READ_OOO_ENGINE_ID [j]->write(i);
+                  in_GPR_READ_NUM_REG       [j]->write(gpr_address[j]);
+                }
+              
+              SC_START(1);
+
+              // Test if read
+              for (uint32_t j=0; j<_param->_nb_gpr_read; j++)
+                if (in_GPR_READ_VAL [j]->read() and out_GPR_READ_ACK [j]->read())
+                  {
+                    TEST(Tgeneral_data_t, out_GPR_READ_DATA    [j]->read(), gpr        [i][gpr_address[j]]);
+                    TEST(Tcontrol_t     , out_GPR_READ_DATA_VAL[j]->read(), gpr_status [i][gpr_address[j]]);
+
+                    gpr_address[j] = gpr_address_next;
+
+                    if (gpr_address_next >= _param->_nb_general_register [i])
+                      nb_port_gpr_active --;                
+                    
+                    gpr_address_next ++;
+                  }
+            }
+        }
+
+      for (uint32_t i=0; i<_param->_nb_gpr_read; i++)
+        in_GPR_READ_VAL [i]->write(0);
+
+      LABEL("(SPR) Write default value");
+
+      for (uint32_t i=0; i<_param->_nb_ooo_engine; i++)
+        for(uint32_t j=0; j<max_nb_special_register; j++)
+          {
+            spr        [i][j] = rand()%_param->_size_special_data;
+            spr_status [i][j] = 1;
+          }
+
+      for (uint32_t i=0; i<_param->_nb_ooo_engine; i++)
+        {
+          spr_address_next   = _param->_nb_spr_write;
+          nb_port_spr_active = _param->_nb_spr_write;
+          
+          for (uint32_t j=0; j<_param->_nb_spr_write; j++)
+            {
+              spr_address[j] = j;
+              if (j >= _param->_nb_special_register [i])
+                nb_port_spr_active --;
+            }
+          
+          while (nb_port_spr_active > 0)
+            {
+              for (uint32_t j=0; j<_param->_nb_spr_write; j++)
+                {
+                  in_SPR_WRITE_VAL           [j]->write((spr_address[j] < _param->_nb_special_register [i]) and
+                                                        ((rand() % 100) < percent_transaction_write));
+                  in_SPR_WRITE_OOO_ENGINE_ID [j]->write(i);
+                  in_SPR_WRITE_NUM_REG       [j]->write(spr_address[j]);
+                  in_SPR_WRITE_DATA          [j]->write(spr [i][spr_address[j]]);
+                }
+              
+              SC_START(1);
+
+              // Test if write
+              for (uint32_t j=0; j<_param->_nb_spr_write; j++)
+                if (in_SPR_WRITE_VAL [j]->read() and out_SPR_WRITE_ACK [j]->read())
+                  {
+                    spr_address[j] = spr_address_next;
+
+                    if (spr_address_next >= _param->_nb_special_register [i])
+                      nb_port_spr_active --;                
+                    
+                    spr_address_next ++;
+                  }
+            }
+        }
+      
+      for (uint32_t i=0; i<_param->_nb_spr_write; i++)
+        in_SPR_WRITE_VAL [i]->write(0);
+
+      LABEL("(SPR) Read - and test data writted");
+      
+      for (uint32_t i=0; i<_param->_nb_ooo_engine; i++)
+        {
+          spr_address_next   = _param->_nb_spr_read;
+          nb_port_spr_active = _param->_nb_spr_read;
+          
+          for (uint32_t j=0; j<_param->_nb_spr_read; j++)
+            {
+              spr_address[j] = j;
+              if (j >= _param->_nb_special_register [i])
+                nb_port_spr_active --;
+            }
+          
+          while (nb_port_spr_active > 0)
+            {
+              for (uint32_t j=0; j<_param->_nb_spr_read; j++)
+                {
+                  in_SPR_READ_VAL           [j]->write((spr_address[j] < _param->_nb_special_register [i]) and
+                                                       ((rand() % 100) < percent_transaction_read));
+                  in_SPR_READ_OOO_ENGINE_ID [j]->write(i);
+                  in_SPR_READ_NUM_REG       [j]->write(spr_address[j]);
+                }
+              
+              SC_START(1);
+
+              // Test if read
+              for (uint32_t j=0; j<_param->_nb_spr_read; j++)
+                if (in_SPR_READ_VAL [j]->read() and out_SPR_READ_ACK [j]->read())
+                  {
+                    TEST(Tspecial_data_t, out_SPR_READ_DATA    [j]->read(), spr        [i][spr_address[j]]);
+                    TEST(Tcontrol_t     , out_SPR_READ_DATA_VAL[j]->read(), spr_status [i][spr_address[j]]);
+
+                    spr_address[j] = spr_address_next;
+
+                    if (spr_address_next >= _param->_nb_special_register [i])
+                      nb_port_spr_active --;                
+                    
+                    spr_address_next ++;
+                  }
+            }
+        }
+
+      for (uint32_t i=0; i<_param->_nb_spr_read; i++)
+        in_SPR_READ_VAL [i]->write(0);
+      
+      LABEL("insert rob");
+
+      uint32_t cpt = 0;
+      
+      while (cpt < nb_request)
+        {
+          for (uint32_t i=0; i<_param->_nb_ooo_engine; i++)
+            {
+              uint32_t x=_param->_nb_inst_insert_rob [i];
+              for (uint32_t j=0; j<x; j++)
+                {
+                  in_INSERT_ROB_VAL        [i][j]->write((rand() % 100) < percent_transaction_insert);
+                  in_INSERT_ROB_RD_USE     [i][j]->write((rand() % 100) < percent_transaction_insert_use);
+                  in_INSERT_ROB_RD_NUM_REG [i][j]->write(rand() % _param->_nb_general_register [i]);
+                  in_INSERT_ROB_RE_USE     [i][j]->write((rand() % 100) < percent_transaction_insert_use);
+                  in_INSERT_ROB_RE_NUM_REG [i][j]->write(rand() % _param->_nb_special_register [i]);
+                }
+            }
+          
+          SC_START(1);
+          
+          for (uint32_t i=0; i<_param->_nb_ooo_engine; i++)
+            {
+              uint32_t x=_param->_nb_inst_insert_rob [i];
+              for (uint32_t j=0; j<x; j++)
+                {
+                  if (in_INSERT_ROB_VAL [i][j]->read() and out_INSERT_ROB_ACK [i][j]->read())
+                    {
+                      cpt ++;
+                      
+                      if (in_INSERT_ROB_RD_USE [i][j]->read())
+                        gpr_status [i][in_INSERT_ROB_RD_NUM_REG [i][j]->read()] = 0;
+                      
+                      if (in_INSERT_ROB_RE_USE [i][j]->read())
+                        spr_status [i][in_INSERT_ROB_RE_NUM_REG [i][j]->read()] = 0;
+                    }
+                }
+            }
+        }
+      for (uint32_t i=0; i<_param->_nb_ooo_engine; i++)
+        for (uint32_t j=0; j<_param->_nb_inst_insert_rob [i]; j++)
+          in_INSERT_ROB_VAL [i][j]->write(0);
+
+      LABEL("(GPR) Read - and test data writted");
+      
+      for (uint32_t i=0; i<_param->_nb_ooo_engine; i++)
+        {
+          gpr_address_next   = _param->_nb_gpr_read;
+          nb_port_gpr_active = _param->_nb_gpr_read;
+          
+          for (uint32_t j=0; j<_param->_nb_gpr_read; j++)
+            {
+              gpr_address[j] = j;
+              if (j >= _param->_nb_general_register [i])
+                nb_port_gpr_active --;
+            }
+          
+          while (nb_port_gpr_active > 0)
+            {
+              for (uint32_t j=0; j<_param->_nb_gpr_read; j++)
+                {
+                  in_GPR_READ_VAL           [j]->write((gpr_address[j] < _param->_nb_general_register [i]) and
+                                                       ((rand() % 100) < percent_transaction_read));
+                  in_GPR_READ_OOO_ENGINE_ID [j]->write(i);
+                  in_GPR_READ_NUM_REG       [j]->write(gpr_address[j]);
+                }
+              
+              SC_START(1);
+
+              // Test if read
+              for (uint32_t j=0; j<_param->_nb_gpr_read; j++)
+                if (in_GPR_READ_VAL [j]->read() and out_GPR_READ_ACK [j]->read())
+                  {
+                    TEST(Tgeneral_data_t, out_GPR_READ_DATA    [j]->read(), gpr        [i][gpr_address[j]]);
+                    TEST(Tcontrol_t     , out_GPR_READ_DATA_VAL[j]->read(), gpr_status [i][gpr_address[j]]);
+
+                    gpr_address[j] = gpr_address_next;
+
+                    if (gpr_address_next >= _param->_nb_general_register [i])
+                      nb_port_gpr_active --;                
+                    
+                    gpr_address_next ++;
+                  }
+            }
+        }
+
+      for (uint32_t i=0; i<_param->_nb_gpr_read; i++)
+        in_GPR_READ_VAL [i]->write(0);
+
+      LABEL("(SPR) Read - and test data writted");
+      
+      for (uint32_t i=0; i<_param->_nb_ooo_engine; i++)
+        {
+          spr_address_next   = _param->_nb_spr_read;
+          nb_port_spr_active = _param->_nb_spr_read;
+          
+          for (uint32_t j=0; j<_param->_nb_spr_read; j++)
+            {
+              spr_address[j] = j;
+              if (j >= _param->_nb_special_register [i])
+                nb_port_spr_active --;
+            }
+          
+          while (nb_port_spr_active > 0)
+            {
+              for (uint32_t j=0; j<_param->_nb_spr_read; j++)
+                {
+                  in_SPR_READ_VAL           [j]->write((spr_address[j] < _param->_nb_special_register [i]) and
+                                                       ((rand() % 100) < percent_transaction_read));
+                  in_SPR_READ_OOO_ENGINE_ID [j]->write(i);
+                  in_SPR_READ_NUM_REG       [j]->write(spr_address[j]);
+                }
+              
+              SC_START(1);
+
+              // Test if read
+              for (uint32_t j=0; j<_param->_nb_spr_read; j++)
+                if (in_SPR_READ_VAL [j]->read() and out_SPR_READ_ACK [j]->read())
+                  {
+                    TEST(Tspecial_data_t, out_SPR_READ_DATA    [j]->read(), spr        [i][spr_address[j]]);
+                    TEST(Tcontrol_t     , out_SPR_READ_DATA_VAL[j]->read(), spr_status [i][spr_address[j]]);
+
+                    spr_address[j] = spr_address_next;
+
+                    if (spr_address_next >= _param->_nb_special_register [i])
+                      nb_port_spr_active --;                
+                    
+                    spr_address_next ++;
+                  }
+            }
+        }
+
+      LABEL("retire rob");
+
+      cpt = 0;
+      
+      while (cpt < nb_request)
+        {
+          for (uint32_t i=0; i<_param->_nb_ooo_engine; i++)
+            {
+              uint32_t x=_param->_nb_inst_retire_rob [i];
+              for (uint32_t j=0; j<x; j++)
+                {
+                  in_RETIRE_ROB_VAL            [i][j]->write((rand() % 100) < percent_transaction_retire);
+                  in_RETIRE_ROB_RD_OLD_USE     [i][j]->write((rand() % 100) < percent_transaction_retire_use);
+                  in_RETIRE_ROB_RD_OLD_NUM_REG [i][j]->write(rand() % _param->_nb_general_register [i]);
+                  in_RETIRE_ROB_RD_NEW_USE     [i][j]->write((rand() % 100) < percent_transaction_retire_use);
+                  in_RETIRE_ROB_RD_NEW_NUM_REG [i][j]->write(rand() % _param->_nb_general_register [i]);            
+                  in_RETIRE_ROB_RE_OLD_USE     [i][j]->write((rand() % 100) < percent_transaction_retire_use); 
+                  in_RETIRE_ROB_RE_OLD_NUM_REG [i][j]->write(rand() % _param->_nb_special_register [i]);            
+                  in_RETIRE_ROB_RE_NEW_USE     [i][j]->write((rand() % 100) < percent_transaction_retire_use);
+                  in_RETIRE_ROB_RE_NEW_NUM_REG [i][j]->write(rand() % _param->_nb_special_register [i]);            
+                }
+            }
+          
+          SC_START(1);
+          
+          for (uint32_t i=0; i<_param->_nb_ooo_engine; i++)
+            {
+              uint32_t x=_param->_nb_inst_retire_rob [i];
+              for (uint32_t j=0; j<x; j++)
+                {
+                  if (in_RETIRE_ROB_VAL [i][j]->read() and out_RETIRE_ROB_ACK [i][j]->read())
+                    {
+                      cpt ++;
+                      
+                      if (in_RETIRE_ROB_RD_OLD_USE [i][j]->read())
+                        gpr_status [i][in_RETIRE_ROB_RD_OLD_NUM_REG [i][j]->read()] = 0;
+                      if (in_RETIRE_ROB_RD_NEW_USE [i][j]->read())
+                        gpr_status [i][in_RETIRE_ROB_RD_NEW_NUM_REG [i][j]->read()] = 1;
+                      if (in_RETIRE_ROB_RE_OLD_USE [i][j]->read())
+                        spr_status [i][in_RETIRE_ROB_RE_OLD_NUM_REG [i][j]->read()] = 0;
+                      if (in_RETIRE_ROB_RE_NEW_USE [i][j]->read())
+                        spr_status [i][in_RETIRE_ROB_RE_NEW_NUM_REG [i][j]->read()] = 1;
+                    }
+                }
+            }
+        }
+      for (uint32_t i=0; i<_param->_nb_ooo_engine; i++)
+        for (uint32_t j=0; j<_param->_nb_inst_retire_rob [i]; j++)
+          in_RETIRE_ROB_VAL [i][j]->write(0);
+
+      LABEL("(GPR) Read - and test data writted");
+      
+      for (uint32_t i=0; i<_param->_nb_ooo_engine; i++)
+        {
+          gpr_address_next   = _param->_nb_gpr_read;
+          nb_port_gpr_active = _param->_nb_gpr_read;
+          
+          for (uint32_t j=0; j<_param->_nb_gpr_read; j++)
+            {
+              gpr_address[j] = j;
+              if (j >= _param->_nb_general_register [i])
+                nb_port_gpr_active --;
+            }
+          
+          while (nb_port_gpr_active > 0)
+            {
+              for (uint32_t j=0; j<_param->_nb_gpr_read; j++)
+                {
+                  in_GPR_READ_VAL           [j]->write((gpr_address[j] < _param->_nb_general_register [i]) and
+                                                       ((rand() % 100) < percent_transaction_read));
+                  in_GPR_READ_OOO_ENGINE_ID [j]->write(i);
+                  in_GPR_READ_NUM_REG       [j]->write(gpr_address[j]);
+                }
+              
+              SC_START(1);
+
+              // Test if read
+              for (uint32_t j=0; j<_param->_nb_gpr_read; j++)
+                if (in_GPR_READ_VAL [j]->read() and out_GPR_READ_ACK [j]->read())
+                  {
+                    TEST(Tgeneral_data_t, out_GPR_READ_DATA    [j]->read(), gpr        [i][gpr_address[j]]);
+                    TEST(Tcontrol_t     , out_GPR_READ_DATA_VAL[j]->read(), gpr_status [i][gpr_address[j]]);
+
+                    gpr_address[j] = gpr_address_next;
+
+                    if (gpr_address_next >= _param->_nb_general_register [i])
+                      nb_port_gpr_active --;                
+                    
+                    gpr_address_next ++;
+                  }
+            }
+        }
+
+      for (uint32_t i=0; i<_param->_nb_gpr_read; i++)
+        in_GPR_READ_VAL [i]->write(0);
+
+      LABEL("(SPR) Read - and test data writted");
+      
+      for (uint32_t i=0; i<_param->_nb_ooo_engine; i++)
+        {
+          spr_address_next   = _param->_nb_spr_read;
+          nb_port_spr_active = _param->_nb_spr_read;
+          
+          for (uint32_t j=0; j<_param->_nb_spr_read; j++)
+            {
+              spr_address[j] = j;
+              if (j >= _param->_nb_special_register [i])
+                nb_port_spr_active --;
+            }
+          
+          while (nb_port_spr_active > 0)
+            {
+              for (uint32_t j=0; j<_param->_nb_spr_read; j++)
+                {
+                  in_SPR_READ_VAL           [j]->write((spr_address[j] < _param->_nb_special_register [i]) and
+                                                       ((rand() % 100) < percent_transaction_read));
+                  in_SPR_READ_OOO_ENGINE_ID [j]->write(i);
+                  in_SPR_READ_NUM_REG       [j]->write(spr_address[j]);
+                }
+              
+              SC_START(1);
+
+              // Test if read
+              for (uint32_t j=0; j<_param->_nb_spr_read; j++)
+                if (in_SPR_READ_VAL [j]->read() and out_SPR_READ_ACK [j]->read())
+                  {
+                    TEST(Tspecial_data_t, out_SPR_READ_DATA    [j]->read(), spr        [i][spr_address[j]]);
+                    TEST(Tcontrol_t     , out_SPR_READ_DATA_VAL[j]->read(), spr_status [i][spr_address[j]]);
+
+                    spr_address[j] = spr_address_next;
+
+                    if (spr_address_next >= _param->_nb_special_register [i])
+                      nb_port_spr_active --;                
+                    
+                    spr_address_next ++;
+                  }
+            }
+        }
+
     }
 

trunk/IPs/systemC/processor/Morpheo/Behavioural/Makefile.flags

@@ -15 +15 @@
 #-----[ Flags ]--------------------------------------------
 MORPHEO_FLAGS                   =       -DSYSTEMC               \
+                                        -DVHDL                  \
+                                        -DVHDL_TESTBENCH        \
+                                        -DVHDL_TESTBENCH_ASSERT \
                                         -DDEBUG=DEBUG_TRACE     
 
-#                                       -DVHDL                  \
-#                                       -DVHDL_TESTBENCH        \
-#                                       -DVHDL_TESTBENCH_ASSERT \
 #
 #                                       -DSTATISTICS            \