Rev | Line | |
---|
[15] | 1 | set -tmpdir "xst/projnav.tmp" |
---|
| 2 | set -xsthdpdir "xst" |
---|
| 3 | run |
---|
| 4 | -ifn MPI_NOC.prj |
---|
| 5 | -ifmt mixed |
---|
| 6 | -ofn MPI_NOC |
---|
| 7 | -ofmt NGC |
---|
| 8 | -p xc3s1200e-5-ft256 |
---|
| 9 | -top MPI_NOC |
---|
| 10 | -opt_mode Speed |
---|
| 11 | -opt_level 1 |
---|
| 12 | -iuc NO |
---|
| 13 | -keep_hierarchy Soft |
---|
| 14 | -netlist_hierarchy As_Optimized |
---|
| 15 | -rtlview Yes |
---|
| 16 | -glob_opt AllClockNets |
---|
| 17 | -read_cores YES |
---|
| 18 | -write_timing_constraints NO |
---|
| 19 | -cross_clock_analysis NO |
---|
| 20 | -hierarchy_separator / |
---|
| 21 | -bus_delimiter <> |
---|
| 22 | -case Maintain |
---|
| 23 | -slice_utilization_ratio 100 |
---|
| 24 | -bram_utilization_ratio 100 |
---|
| 25 | -verilog2001 YES |
---|
| 26 | -fsm_extract YES -fsm_encoding Auto |
---|
| 27 | -safe_implementation No |
---|
| 28 | -fsm_style LUT |
---|
| 29 | -ram_extract Yes |
---|
| 30 | -ram_style Auto |
---|
| 31 | -rom_extract Yes |
---|
| 32 | -mux_style Auto |
---|
| 33 | -decoder_extract YES |
---|
| 34 | -priority_extract Yes |
---|
| 35 | -shreg_extract YES |
---|
| 36 | -shift_extract YES |
---|
| 37 | -xor_collapse YES |
---|
| 38 | -rom_style Auto |
---|
| 39 | -auto_bram_packing NO |
---|
| 40 | -mux_extract Yes |
---|
| 41 | -resource_sharing YES |
---|
| 42 | -async_to_sync NO |
---|
| 43 | -mult_style LUT |
---|
| 44 | -iobuf YES |
---|
| 45 | -max_fanout 100000 |
---|
| 46 | -bufg 24 |
---|
| 47 | -register_duplication YES |
---|
| 48 | -register_balancing No |
---|
| 49 | -slice_packing YES |
---|
| 50 | -optimize_primitives NO |
---|
| 51 | -use_clock_enable Yes |
---|
| 52 | -use_sync_set Yes |
---|
| 53 | -use_sync_reset Yes |
---|
| 54 | -iob Auto |
---|
| 55 | -equivalent_register_removal YES |
---|
| 56 | -slice_utilization_ratio_maxmargin 5 |
---|
Note: See
TracBrowser
for help on using the repository browser.