[15] | 1 | <?xml version="1.0" encoding="UTF-8"?> |
---|
| 2 | <!-- IMPORTANT: This is an internal file that has been generated |
---|
| 3 | by the Xilinx ISE software. Any direct editing or |
---|
| 4 | changes made to this file may result in unpredictable |
---|
| 5 | behavior or data corruption. It is strongly advised that |
---|
| 6 | users do not edit the contents of this file. --> |
---|
| 7 | <messages> |
---|
| 8 | <msg type="info" file="Par" num="282" delta="old" >No user timing constraints were detected or you have set the option to ignore timing constraints ("par -x"). Place and Route will run in "Performance Evaluation Mode" to automatically improve the performance of all internal clocks in this design. Because there are not defined timing requirements, a timing score will not be reported in the PAR report in this mode. The PAR timing summary will list the performance achieved for each clock. Note: For the fastest runtime, set the effort level to "std". For best performance, set the effort level to "high". |
---|
| 9 | </msg> |
---|
| 10 | |
---|
| 11 | <msg type="warning" file="Par" num="288" delta="old" >The signal <arg fmt="%s" index="1">uut/connect_core[2].hardmpi/Instruction_Fifo2/fifo_RAM_64/Mram_RAM1_RAMD_O</arg> has no load. PAR will not attempt to route this signal. |
---|
| 12 | </msg> |
---|
| 13 | |
---|
| 14 | <msg type="warning" file="Par" num="288" delta="old" >The signal <arg fmt="%s" index="1">uut/connect_core[2].hardmpi/Instruction_Fifo2/fifo_RAM_64/Mram_RAM2_RAMD_O</arg> has no load. PAR will not attempt to route this signal. |
---|
| 15 | </msg> |
---|
| 16 | |
---|
| 17 | <msg type="warning" file="Par" num="288" delta="old" >The signal <arg fmt="%s" index="1">uut/connect_core[2].hardmpi/Instruction_Fifo1/fifo_RAM_64/Mram_RAM2_RAMD_O</arg> has no load. PAR will not attempt to route this signal. |
---|
| 18 | </msg> |
---|
| 19 | |
---|
| 20 | <msg type="warning" file="Par" num="288" delta="old" >The signal <arg fmt="%s" index="1">uut/connect_core[2].hardmpi/Instruction_Fifo1/fifo_RAM_64/Mram_RAM1_RAMD_O</arg> has no load. PAR will not attempt to route this signal. |
---|
| 21 | </msg> |
---|
| 22 | |
---|
| 23 | <msg type="warning" file="Par" num="288" delta="old" >The signal <arg fmt="%s" index="1">uut/connect_core[1].hardmpi/Instruction_Fifo2/fifo_RAM_64/Mram_RAM2_RAMD_O</arg> has no load. PAR will not attempt to route this signal. |
---|
| 24 | </msg> |
---|
| 25 | |
---|
| 26 | <msg type="warning" file="Par" num="288" delta="old" >The signal <arg fmt="%s" index="1">uut/connect_core[1].hardmpi/Instruction_Fifo1/fifo_RAM_64/Mram_RAM1_RAMD_O</arg> has no load. PAR will not attempt to route this signal. |
---|
| 27 | </msg> |
---|
| 28 | |
---|
| 29 | <msg type="warning" file="Par" num="288" delta="old" >The signal <arg fmt="%s" index="1">uut/connect_core[1].hardmpi/Instruction_Fifo2/fifo_RAM_64/Mram_RAM1_RAMD_O</arg> has no load. PAR will not attempt to route this signal. |
---|
| 30 | </msg> |
---|
| 31 | |
---|
| 32 | <msg type="warning" file="Par" num="288" delta="old" >The signal <arg fmt="%s" index="1">uut/connect_core[1].hardmpi/Instruction_Fifo1/fifo_RAM_64/Mram_RAM2_RAMD_O</arg> has no load. PAR will not attempt to route this signal. |
---|
| 33 | </msg> |
---|
| 34 | |
---|
| 35 | <msg type="info" file="Timing" num="2761" delta="old" >N/A entries in the Constraints List may indicate that the constraint is not analyzed due to the following: No paths covered by this constraint; Other constraints intersect with this constraint; or This constraint was disabled by a Path Tracing Control. Please run the Timespec Interaction Report (TSI) via command line (trce tsi) or Timing Analyzer GUI.</msg> |
---|
| 36 | |
---|
| 37 | <msg type="info" file="Par" num="459" delta="old" >The Clock Report is not displayed in the non timing-driven mode. |
---|
| 38 | </msg> |
---|
| 39 | |
---|
| 40 | <msg type="info" file="Timing" num="2761" delta="old" >N/A entries in the Constraints List may indicate that the constraint is not analyzed due to the following: No paths covered by this constraint; Other constraints intersect with this constraint; or This constraint was disabled by a Path Tracing Control. Please run the Timespec Interaction Report (TSI) via command line (trce tsi) or Timing Analyzer GUI.</msg> |
---|
| 41 | |
---|
| 42 | <msg type="warning" file="ParHelpers" num="361" delta="old" >There are <arg fmt="%d" index="1">8</arg> loadless signals in this design. This design will cause Bitgen to issue DRC warnings. |
---|
| 43 | |
---|
| 44 | </msg> |
---|
| 45 | |
---|
| 46 | <msg type="warning" file="Par" num="283" delta="old" >There are <arg fmt="%d" index="1">8</arg> loadless signals in this design. This design will cause Bitgen to issue DRC warnings. |
---|
| 47 | |
---|
| 48 | </msg> |
---|
| 49 | |
---|
| 50 | </messages> |
---|
| 51 | |
---|