| [724] | 1 | TSAR BOOT LOADER |
|---|
| 2 | |
|---|
| 3 | Files: |
|---|
| 4 | =============================================================================== |
|---|
| 5 | src/ Source files |
|---|
| 6 | The entry point of this boot loader is the file reset.S |
|---|
| 7 | |
|---|
| 8 | include/ Header files |
|---|
| 9 | |
|---|
| 10 | conf/ Platform specific files and ldscript examples. |
|---|
| 11 | For each platform, we must define a new directory. |
|---|
| 12 | |
|---|
| 13 | - defs_platform.h: |
|---|
| 14 | |
|---|
| 15 | This file is mandatory. This file defines the NB_PROCS per |
|---|
| 16 | cluster, the NB_CLUSTERS and the base address of the TTY, IOC, |
|---|
| 17 | XICU and MEMC (config) devices. It defines also: |
|---|
| 18 | |
|---|
| 19 | #define USE_IOB |
|---|
| 20 | |
|---|
| 21 | This constant is used by the boot_ioc_read function to know |
|---|
| 22 | if the buffer used to store the blocks from the block_device |
|---|
| 23 | must be invalidated in the memory cache after the transfert |
|---|
| 24 | has finished. |
|---|
| 25 | |
|---|
| 26 | #define CACHE_COHERENCE |
|---|
| 27 | |
|---|
| 28 | This constant is used by the boot_ioc_read function to know |
|---|
| 29 | if the buffer used to store the blocks from the block_device |
|---|
| 30 | must be invalidated in the dcache after the transfert has |
|---|
| 31 | finished. |
|---|
| 32 | |
|---|
| 33 | #define CACHE_LINE_SIZE |
|---|
| 34 | |
|---|
| 35 | This constant is mandatory if CACHE_COHERENCE=0 or USE_IOB=1 |
|---|
| 36 | This constant defines the size in bytes of a cache line. |
|---|
| 37 | |
|---|
| 38 | #define RESET_DEBUG |
|---|
| 39 | |
|---|
| 40 | Set value to 1 to show some debug messages during loading |
|---|
| 41 | |
|---|
| 42 | #define IRQ_PER_PROC |
|---|
| 43 | |
|---|
| 44 | This constant is used to know how many XICU irq outputs are |
|---|
| 45 | connected to each processor. |
|---|
| 46 | |
|---|
| 47 | - platform_soclib.dts: |
|---|
| 48 | |
|---|
| 49 | Device tree file. It is mandatory if compiling for a SOCLIB |
|---|
| 50 | platform and USE_DT=1. |
|---|
| 51 | |
|---|
| 52 | - platform_fpga.dts: |
|---|
| 53 | |
|---|
| 54 | Device tree file. It is mandatory if compiling for a FPGA |
|---|
| 55 | platform and USE_DT=1. |
|---|
| 56 | |
|---|
| 57 | - ldscript: |
|---|
| 58 | |
|---|
| 59 | LD script defining the segments of this boot loader. |
|---|
| 60 | We define two segments: |
|---|
| 61 | |
|---|
| 62 | seg_stack_base: |
|---|
| 63 | |
|---|
| 64 | Base address of the stack used by processor 0 during the boot |
|---|
| 65 | process. read-write data and bss will also be there. |
|---|
| 66 | |
|---|
| 67 | seg_boot_base: |
|---|
| 68 | |
|---|
| 69 | Base address of the code and read-only data defined for this |
|---|
| 70 | loader |
|---|
| 71 | |
|---|
| 72 | Makefile Makefile to compile the boot loader. Arguments to pass: |
|---|
| 73 | |
|---|
| 74 | PLATFORM_DIR=<platform_dir> |
|---|
| 75 | |
|---|
| 76 | Defines the directory where to find the plateform specific |
|---|
| 77 | files |
|---|
| 78 | |
|---|
| 79 | SOCLIB=1 |
|---|
| 80 | |
|---|
| 81 | If using SOCLIB, define this flag to use the BLOCK DEVICE |
|---|
| 82 | driver and to choose the platform_soclib device tree. |
|---|
| 83 | |
|---|
| 84 | RAMDISK=1 |
|---|
| 85 | |
|---|
| 86 | If using SOCLIB, define this flag to use a RAMDISK instead of |
|---|
| 87 | BLOCK DEVICE (Set this flag when the SOCLIB flag is also set) |
|---|
| 88 | |
|---|
| 89 | USE_DT=0 |
|---|
| 90 | |
|---|
| 91 | If a device tree file is not used, set this flag to 0. It is |
|---|
| 92 | set by default to 1. |
|---|
| 93 | |
|---|
| 94 | e.g. make PLATFORM_DIR=<platform_conf> \ |
|---|
| 95 | SOCLIB=1 \ |
|---|
| 96 | USE_DT=0 \ |
|---|
| 97 | RAMDISK=0 |
|---|
