source: branches/v4/softs/tsar_boot/include/sdcard.h @ 1031

Last change on this file since 1031 was 292, checked in by cfuguet, 12 years ago

Changing directory structure of the TSAR boot loader.
A README.txt file has been included to explain the new structure
and the MAKEFILE parameters.

Erasing the heap segment for the boot elf loader. All the work space
is allocated in the stack.

The stack size is defined in the include/defs.h.

Important modification in the reset.S file. The non-boot
processors (processor id != 0) wait in a low comsumption energy
mode to be wake up by processor 0 using an IPI. Each processor
has a private mailbox in the local XICU. The value written in
the mailbox will be used as address to jump by the processors.

The waking up of non-boot processors is not done in this boot loader
so it must be done in the application loaded.

The boot_loader_elf function loads into memory an executable .elf file
which must be placed in the BOOT_LOADER_LBA block of the disk. This
constant can be defined in the include/defs.h file.

File size: 5.3 KB
Line 
1/**
2 * \file sdcard.h
3 * \date 30 August 2012
4 * \author Cesar fuguet <cesar.fuguet-tortolero@lip6.fr>
5 *
6 * This file defines the driver of a SD Card device using an SPI controller
7 */
8
9#ifndef SDCARD_H
10#define SDCARD_H
11
12#include <spi.h>
13
14/**
15 * \brief SD Card type definition
16 */
17struct sdcard_dev
18{ 
19    /**
20     * SPI controller pointer
21     */
22    struct spi_dev * spi;
23
24    /**
25     * Capacity of the SDCARD in terms of bytes
26     */
27    unsigned int capacity;
28
29    /**
30     * Block length of the SDCARD
31     */
32    unsigned int block_length;
33
34    /**
35     * Access pointer representing the offset in bytes used
36     * to read or write in the SDCARD.
37     *
38     * \note this driver is for cards SDSD, therefore this offset
39     *       must be multiple of the block length
40     */ 
41    unsigned int access_pointer;
42
43    /**
44     * Slave ID. This ID represents the number of the slave select signal
45     * used in the hardware platform
46     */
47    int    slave_id;
48};
49
50/**
51 * \param   sdcard  : uninitialized pointer. This parameter will contain
52 *                    a pointer to the initialized block device or NULL otherwise
53 * \param   spi     : initialized pointer to the spi controller
54 * \param   ss      : slave select signal number
55 *
56 * \return  0 when initialization succeeds or an error code value otherwise.
57 *          The error codes are defined in this header file.
58 *
59 * \brief   Initialize the block device
60 */
61int sdcard_dev_open(struct sdcard_dev * sdcard, struct spi_dev * spi, int ss);
62
63/**
64 * \param   sdcard  : Pointer to the initialized block device
65 * \param   buf     : Pointer to a memory segment wherein store
66 * \param   count   : number of bytes to read
67 *
68 * \return  0 when read succeeds or an error code value otherwise.
69 *          The error codes are defined in this header file.
70 *
71 * \brief   Read in the block device
72 *
73 * The read is made in the current block device access pointer.
74 * In the read succeeds, the block device access pointer is
75 * relocated to the next block.
76 */
77int sdcard_dev_read(struct sdcard_dev * sdcard, void * buf, unsigned int count);
78
79/**
80 * \param   sdcard  : Pointer to the initialized block device
81 * \param   buf     : Pointer to a memory segment wherein the
82 * \param   count   : number of blocks to write
83 *
84 * \return  0 when write succeeds or an error code value otherwise.
85 *          The error codes are defined in this header file.
86 *
87 * \brief   Write in the block device
88 *
89 * The write is made in the current block device access pointer.
90 * In the write succeeds, the block device access pointer is
91 * relocated to the next block.
92 */
93unsigned int sdcard_dev_write(struct sdcard_dev * sdcard, void * buf, unsigned int count);
94
95/**
96 * \param   sdcard  : Pointer to the initialized block device
97 * \param   pos     : Position where the block device access
98 *                    pointer must be move
99 *
100 * \return  void
101 *
102 * \brief   Change block device access pointer position
103 * 
104 * The block device access pointer is relocated in terms of blocks
105 */
106void sdcard_dev_lseek(struct sdcard_dev * sdcard, unsigned int pos);
107
108/**
109 * \param   sdcard  : Pointer to the initialized block device
110 *
111 * \return  block device capacity
112 *
113 * \brief   Get the block device capacity
114 *
115 * The block device access pointer is relocated in terms of blocks
116 */
117unsigned int sdcard_dev_get_capacity(struct sdcard_dev * sdcard);
118
119/**
120 * \param   sdcard  : Pointer to the initialized block device
121 * \param   len     : Block device length to set
122 *
123 * \return  0 when succeed or error code value otherwise
124 *
125 * \brief   Set the block length of the device
126 */
127int sdcard_dev_set_blocklen(struct sdcard_dev * sdcard, unsigned int len);
128
129/**
130 * SD Card constants
131 */
132
133/** Number of retries after an unacknowledge command */
134#define SDCARD_COMMAND_TIMEOUT      100
135
136/** This command is a simple SD commmand */
137#define SDCARD_CMD                  0
138
139/** This is an application specific command */
140#define SDCARD_ACMD                 1
141
142/** The transmition is done in the negative edge of the clock */
143#define SDCARD_TX_NEGEDGE           0
144
145/** The transmition is done in the positive edge of the clock */
146#define SDCARD_TX_POSEDGE           1
147
148/** The reception is done in the negative edge of the clock */
149#define SDCARD_RX_NEGEDGE           0
150
151/** The reception is done in the positive edge of the clock */
152#define SDCARD_RX_POSEDGE           1
153
154/**
155 * SD Card macros
156 */
157
158/** Check if the response is valid */
159#define SDCARD_CHECK_R1_VALID(x)    (~x & SDCARD_R1_RSP_VALID) ? 1 : 0
160
161/**
162 * Check if there is an error in the response
163 *
164 * \note this macro must be used after verify that the response is
165 *       valid
166 */
167#define SDCARD_CHECK_R1_ERROR(x)    ( x & 0x7E)                ? 1 : 0
168
169/**
170 * SD Card Response 1 (R1) format constants
171 */
172#define SDCARD_R1_IN_IDLE_STATE     ( 1 << 0 ) /**< \brief R1 bit 0 */
173#define SDCARD_R1_ERASE_RESET       ( 1 << 1 ) /**< \brief R1 bit 1 */
174#define SDCARD_R1_ILLEGAL_CMD       ( 1 << 2 ) /**< \brief R1 bit 2 */
175#define SDCARD_R1_COM_CRC_ERR       ( 1 << 3 ) /**< \brief R1 bit 3 */
176#define SDCARD_R1_ERASE_SEQ_ERR     ( 1 << 4 ) /**< \brief R1 bit 4 */
177#define SDCARD_R1_ADDRESS_ERR       ( 1 << 5 ) /**< \brief R1 bit 5 */
178#define SDCARD_R1_PARAMETER_ERR     ( 1 << 6 ) /**< \brief R1 bit 6 */
179#define SDCARD_R1_RSP_VALID         ( 1 << 7 ) /**< \brief R1 bit 7 */
180
181#endif
182
183/*
184 * vim: tabstop=4 : shiftwidth=4 : expandtab : softtabstop=4
185 */
Note: See TracBrowser for help on using the repository browser.