Context Navigation

reset.S @ 989

Last change on this file since 989 was 349, checked in by cfuguet, 12 years ago
Rearranging addresses in the function pointer table to keep backward compatibility with applications using the old values.
File size: 6.5 KB

Line
1	/**
2	* \file : reset.S
3	* \date : 01/12/2012
4	* \author: Cesar FUGUET & Manuel BOUYER & Alain Greiner
5	*
6	* This is a boot code for a generic multi-clusters / multi-processors
7	* TSAR architecture (up to 256 clusters / up to 4 processors per cluster).
8	* There is one XICU, one TTY, one DMA and one stack segment per cluster.
9	* segment base adresses = base + cluster_segment_increment*cluster_id
10	*
11	* - Each processor initializes the Status Register (SR) to disable interrupts.
12	* - Each processor initializes the Count Register.
13	* - Each processor initialises its private XICU Write Triggered Interruption
14	* mask register.
15	* - Only processor 0 initializes the stack pointer ($29).
16	* - Only processor 0 (boot processor) executes the boot_load_elf function to
17	* load in memory the boot loader stored in the block BOOT_LOADER_LBA of
18	* the disk.
19	* - All non-boot processors wait in a low power consumption mode that the
20	* processor 0 wakes them using the IPI (Inter Processor Interruption)
21	* functionality of the XICU device.
22	*/
23
24	#include <defs.h>
25	#include <mips32_registers.h>
26
27	.section .boot,"ax",@progbits
28
29	.extern seg_stack_base
30
31	.extern dtb_addr
32	.extern boot_putc
33	.extern boot_getc
34	.extern boot_ioc_read
35	.extern boot_elf_loader
36	.extern boot_memcpy
37	.extern boot_puts
38	.extern boot_putx
39	.extern boot_putd
40	.extern boot_ioc_init
41
42	.globl boot /* Make reset an external symbol */
43	.ent boot
44
45	.align 2
46	.set noreorder
47
48	boot:
49	b _boot /* 0xbfc0000 */
50	nop /* 0xbfc0004 */
51
52	/* Addresses of the functions provided by this pre-loader */
53
54	.word BOOT_VERSION /* 0xbfc0008 */
55	.word dtb_addr /* 0xbfc000c */
56	.word boot_putc /* 0xbfc0010 */
57	.word boot_getc /* 0xbfc0014 */
58	.word boot_ioc_read /* 0xbfc0018 */
59	.word boot_elf_loader /* 0xbfc001C */
60	.word boot_memcpy /* 0xbfc0020 */
61	.word boot_puts /* 0xbfc0024 */
62	.word boot_putx /* 0xbfc0028 */
63	.word boot_putd /* 0xbfc002C */
64
65	_boot:
66	/* Disable interruptions, keep STATUSbev enabled */
67
68	li k0, (1 << 22)
69	mtc0 k0, CP0_STATUS
70
71	/* Computes proc_id, local_id, cluster_id, and cluster_increment */
72
73	mfc0 k0, CP0_EBASE
74	andi t0, k0, 0x3FF /* t0 <= proc_id (at most 1024 processors) */
75
76	move t3, t0
77
78	la k0, NB_PROCS /* k0 <= number of processors per cluster */
79	divu t3, k0
80	mfhi t1 /* t1 <= local_id = proc_id % NB_PROCS */
81	mflo t2 /* t2 <= cluster_id = proc_id / NB_PROCS */
82
83	la k0, NB_CLUSTERS
84	li t3, 0x80000000
85	divu t3, k0
86	mflo t4
87	sll t4, 1 /* t4 <= cluster_increment = 4G / NB_CLUSTERS */
88
89	mult t4, t2
90	mflo t5 /* t5 <= cluster_id * cluster_increment */
91
92	/* Initialization of the count register in the coprocessor 0 */
93
94	mtc0 zero, CP0_COUNT
95
96	/* In each cluster, the ICU base address depends on the cluster_id */
97
98	la t3, ICU_BASE
99	addu t3, t3, t5 /* t3 <= ICU_BASE + */
100	/* (cluster_id * cluster_increment) */
101
102	/**
103	* Compute the output index for the Write Triggered Interruption mask.
104	* Each processor enable the WTI for its irq output
105	* Each processor may have IRQ_PER_PROC private irq outputs from
106	* the XICU
107	*/
108
109	move t4, t1 /* t4 <= local_id */
110	li t5, IRQ_PER_PROC /* t5 <= IRQ_PER_PROC */
111	multu t4, t5
112	mflo t6 /* t6 <= IRQ_PER_PROC * local_id */
113	sll t4, t6, 2 /* t4 <= OUT_INDEX = t6 * 4 */
114
115	li t5, (0xC << 7) /* t5 <= FUNC = XICU_MSK_WTI */
116	or t4, t4, t5 /* t4 <= FUNC \| INDEX \| 00 */
117	or t5, t3, t4 /* t5 <= &XICU[MSK_WTI][OUT_INDEX] */
118
119	/* Compute and set WTI mask */
120
121	li t4, 1
122	sllv t4, t4, t1 /* Set XICU[MSK_WTI][INDEX][local_id] */
123	sw t4, 0(t5) /* XICU[MSK_WTI][INDEX] <= t4 */
124
125	/**
126	* We have:
127	* t0: global id
128	* t1: local id
129	* t2: cluster id
130	* t3: xicu base address
131	*
132	* Only processor 0 in cluster 0 executes the boot loader
133	*/
134
135	bne zero, t0, _reset_wait
136	nop
137
138	/* Initializes stack pointer */
139
140	la k1, seg_stack_base
141	li k0, BOOT_STACK_SIZE
142	addu sp, k1, k0 /* sp <= seg_stack_base + BOOT_STACK_SIZE */
143
144	#ifndef SOCLIB_IOC
145
146	/* Initialize the block device */
147
148	la k0, boot_ioc_init
149	jalr k0
150	nop
151
152	#endif
153
154	/**
155	* Jump to the boot elf loader routine
156	* Passing as argument the block number in which it must be
157	* the executable elf file to load
158	*/
159
160	la k0, boot_elf_loader
161	li a0, BOOT_LOADER_LBA
162	jalr k0
163	nop
164
165	/**
166	* We jump to the entry point address defined in the
167	* ELF file. This address is returned by boot_elf_loader function.
168	* All function arguments are 0
169	*/
170
171	move a0, zero
172	move a1, zero
173	move a2, zero
174	move a3, zero
175	jr v0
176	nop
177
178	/**
179	* Wait in low power consumption mode until the application wakes us.
180	* The application wakes up the non-boot CPUs using a IPI with a non-0
181	* value in the mailbox. This non-0 value is the address to jump to.
182	*/
183
184	_reset_wait:
185	/**
186	* We have:
187	* t0: global id
188	* t1: local id
189	* t2: cluster id
190	* t3: xicu base address
191	*/
192
193	sll t4, t1, 2 /* t4 <= local_id * 4 */
194	addu t5, t4, t3 /* t5 <= &XICU[WTI_REG][local_id] */
195
196	wait
197
198	lw k0, 0(t5) /* k0 <= XICU[WTI_REG][local_id] */
199	jr k0
200	nop
201
202	/* Exception entry point */
203	.org 0x0380
204	_excep:
205	mfc0 a0, CP0_STATUS /* first arg is status */
206	mfc0 a1, CP0_CAUSE /* second arg is cause */
207	mfc0 a2, CP0_EPC /* third argc is epc */
208	nop
209	j handle_except
210	nop
211
212	.end boot
213
214	.set reorder
215
216	/*
217	* vim: tabstop=4 : shiftwidth=4 : expandtab
218	*/

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format