source: trunk/modules/vci_spi/caba/source/src/vci_spi.cpp @ 563

/* -*- c++ -*-
 *
 * SOCLIB_LGPL_HEADER_BEGIN
 * 
 * This file is part of SoCLib, GNU LGPLv2.1.
 * 
 * SoCLib is free software; you can redistribute it and/or modify it
 * under the terms of the GNU Lesser General Public License as published
 * by the Free Software Foundation; version 2.1 of the License.
 * 
 * SoCLib is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 * 
 * You should have received a copy of the GNU Lesser General Public
 * License along with SoCLib; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
 * 02110-1301 USA
 * 
 * SOCLIB_LGPL_HEADER_END
 *
 * Copyright (c) UPMC, Lip6, SoC
 *       manuel.bouyer@lip6.fr october 2013
 *
 * Maintainers: bouyer
 */

#include <stdint.h>
#include <iostream>
#include <fcntl.h>
#include "vci_spi.h"
#include "vcispi.h"

namespace soclib { namespace caba {

#define tmpl(t) template<typename vci_param> t VciSpi<vci_param>

using namespace soclib::caba;
using namespace soclib::common;

////////////////////////
tmpl(void)::transition()
{
    if(p_resetn.read() == false) 
    {
        r_initiator_fsm   = M_IDLE;
        r_target_fsm      = T_IDLE;
        r_spi_fsm        = S_IDLE;
        r_ss          = 0;
        r_divider        = 0xffff;
        r_ctrl_char_len   = 0;
        r_ctrl_ie        = false;
        r_ctrl_cpol       = false;
        r_ctrl_cpha       = false;
        r_ctrl_go_bsy     = false;
        r_clk_counter     = 0xffff;
        r_spi_clk        = 0;

        r_irq             = false;
        r_read            = false;

        return;
    } 

    //////////////////////////////////////////////////////////////////////////////
    // The Target FSM controls the following registers:
    // r_target_fsm, r_irq_enable, r_nblocks, r_buf adress, r_lba, r_go, r_read
    //////////////////////////////////////////////////////////////////////////////

    switch(r_target_fsm) {
    ////////////
    case T_IDLE:
    {
        if ( p_vci_target.cmdval.read() ) 
        { 
            r_srcid = p_vci_target.srcid.read();
            r_trdid = p_vci_target.trdid.read();
            r_pktid = p_vci_target.pktid.read();
            uint32_t wdata = p_vci_target.wdata.read();
            sc_dt::sc_uint<vci_param::N> address = p_vci_target.address.read();

            bool found = false;
            std::list<soclib::common::Segment>::iterator seg;
            for ( seg = m_seglist.begin() ; seg != m_seglist.end() ; seg++ ) 
            {
                if ( seg->contains(address) ) found = true;
            }
 

            if (not found) {
                if (p_vci_target.cmd.read() == vci_param::CMD_WRITE)
                    r_target_fsm = T_ERROR_WRITE;
                else
                    r_target_fsm = T_ERROR_READ;
            } else if (p_vci_target.cmd.read() != vci_param::CMD_READ &&
                       p_vci_target.cmd.read() != vci_param::CMD_WRITE) {
                r_target_fsm = T_ERROR_READ;
            } else {
                bool     write  = (p_vci_target.cmd.read() == vci_param::CMD_WRITE) & !r_ctrl_go_bsy;
                uint32_t cell   = (uint32_t)((address & 0x3F)>>2);
                switch(cell) {
                case SPI_DATA_TXRX0:
                    r_rdata = r_txrx[0] & (uint64_t)0x00000000ffffffffULL;
                    if (write) {
                        r_txrx[0] =
                           (r_txrx[0] & (uint64_t)0xffffffff00000000ULL) |
                           ((uint64_t)wdata);
                    }
                    r_target_fsm = (p_vci_target.cmd.read() == vci_param::CMD_WRITE) ? T_RSP_WRITE : T_RSP_READ;
                    break;
                case SPI_DATA_TXRX1:
                    r_rdata = r_txrx[0] >> 32;
                    if (write) {
                        r_txrx[0] =
                            (r_txrx[0] & (uint64_t)0x00000000ffffffffULL) |
                            ((uint64_t)wdata << 32);
                    }
                    r_target_fsm = (p_vci_target.cmd.read() == vci_param::CMD_WRITE) ? T_RSP_WRITE : T_RSP_READ;
                    break;
                case SPI_DATA_TXRX2:
                    r_rdata = r_txrx[1] & (uint64_t)0x00000000ffffffffULL;
                    if (write) {
                        r_txrx[1] =
                           (r_txrx[1] & (uint64_t)0xffffffff00000000ULL) |
                           ((uint64_t)wdata);
                    }
                    r_target_fsm = (p_vci_target.cmd.read() == vci_param::CMD_WRITE) ? T_RSP_WRITE : T_RSP_READ;
                    break;
                case SPI_DATA_TXRX3:
                    r_rdata = r_txrx[1] >> 32;
                    if (write) {
                        r_txrx[1] =
                            (r_txrx[1] & (uint64_t)0x00000000ffffffffULL) |
                            ((uint64_t)wdata << 32);
                    }
                    r_target_fsm = (p_vci_target.cmd.read() == vci_param::CMD_WRITE) ? T_RSP_WRITE : T_RSP_READ;
                    break;
                case SPI_CTRL:
                {
                    uint32_t data = 0;
                    if (r_ctrl_cpol.read()) 
                        data |= SPI_CTRL_CPOL;
                    if (r_ctrl_cpha.read()) 
                        data |= SPI_CTRL_CPHA;
                    if (r_ctrl_ie.read()) 
                        data |= SPI_CTRL_IE_EN;
                    if (r_ctrl_go_bsy.read()) 
                        data |= SPI_CTRL_GO_BSY;
                    data |= (uint32_t)r_ctrl_char_len.read();
                    r_rdata = data;
                    if (write) {
                        r_ctrl_cpol = ((wdata & SPI_CTRL_CPOL) != 0);
                        r_ctrl_cpha = ((wdata & SPI_CTRL_CPHA) != 0);
                        r_ctrl_ie  = ((wdata & SPI_CTRL_IE_EN) != 0);
                        r_ctrl_go_bsy = ((wdata & SPI_CTRL_GO_BSY) != 0);
                        r_ctrl_char_len = (wdata & SPI_CTRL_CHAR_LEN_MASK);
#ifdef SOCLIB_MODULE_DEBUG
                        if ((wdata & SPI_CTRL_GO_BSY) != 0) {
                            std::cout << name() << " start xfer " << std::dec << (int)r_ctrl_char_len.read() << " data " << std::hex << r_txrx[1] << " " << r_txrx[0] << std::endl;
                        }
#endif
                    } else {
                        r_irq = r_irq & r_ctrl_go_bsy;
                    }
                    r_target_fsm = (p_vci_target.cmd.read() == vci_param::CMD_WRITE) ? T_RSP_WRITE : T_RSP_READ;
                    break;
                }
                case SPI_DIVIDER:
                    r_rdata = r_divider.read();
                    if (write) {
#ifdef SOCLIB_MODULE_DEBUG
                        std::cout << name() << " divider set to " << std::dec << wdata << std::endl;
#endif
                        r_divider = wdata;
                    }
                    r_target_fsm = (p_vci_target.cmd.read() == vci_param::CMD_WRITE) ? T_RSP_WRITE : T_RSP_READ;
                    break;
                case SPI_SS:
                    r_rdata = r_ss.read();
                    if (write) {
                        r_ss = wdata;
                    }
                    r_target_fsm = (p_vci_target.cmd.read() == vci_param::CMD_WRITE) ? T_RSP_WRITE : T_RSP_READ;
                    break;
                default:
                    r_target_fsm = (p_vci_target.cmd.read() == vci_param::CMD_WRITE) ? T_ERROR_WRITE : T_ERROR_READ;
                    break;
                }
            }
        }
        break;
    }
    ////////////////////
    case T_RSP_READ:
    case T_RSP_WRITE:
    case T_ERROR_READ:
    case T_ERROR_WRITE:
        if (p_vci_target.rspack.read() ) {
            r_target_fsm  = T_IDLE;
        }
        break;
    } // end switch target fsm


        

    //////////////////////////////////////////////////////////////////////////////
    // the SPI FSM controls SPI signals
    //////////////////////////////////////////////////////////////////////////////
    switch (r_spi_fsm) {
    case S_IDLE:
        r_clk_counter = r_divider.read();
        r_spi_clk = 0;
        r_spi_clk_previous = r_ctrl_cpha;
        r_spi_clk_ignore = r_ctrl_cpha;
        r_bit_count = r_ctrl_char_len;
        r_spi_out = (r_txrx[(r_ctrl_char_len -1)/ 64] >> ((r_ctrl_char_len - 1) % 64)) & (uint64_t)0x0000000000000001ULL;
        if (r_ctrl_go_bsy.read())
                r_spi_fsm = S_XMIT;
        break;
    case S_XMIT:
      {
        bool s_clk_sample;
        // on clock transition, sample input line, and shift data
        s_clk_sample = r_spi_clk ^ r_ctrl_cpha;
        if (!r_spi_clk_ignore) {
            if (r_spi_clk_previous == 0 && s_clk_sample == 1) {
                // low to high transition: shift and sample
                r_txrx[1] = (r_txrx[1] << 1) | (r_txrx[0] >> 63);
                r_txrx[0] = (r_txrx[0] << 1) | p_spi_miso;
                r_bit_count = r_bit_count - 1;
            } else if (r_spi_clk_previous == 1 && s_clk_sample == 0) {
                // high to low transition: change output, or stop
                if (r_bit_count == 0) {
                    r_spi_fsm = S_IDLE;
                    r_irq = r_ctrl_ie;
                    r_ctrl_go_bsy = false;
#ifdef SOCLIB_MODULE_DEBUG0
                    std::cout << name() << " end xfer " << std::dec << (int)r_ctrl_char_len.read() << " data " << std::hex << r_txrx[1] << " " << r_txrx[0] << std::endl;
#endif
                } else {
                    r_spi_out = (r_txrx[(r_ctrl_char_len -1)/ 64] >> ((r_ctrl_char_len - 1) % 64)) & (uint64_t)0x0000000000000001ULL;
                }
            }
        }
        r_spi_clk_previous = s_clk_sample;
        // generate the SPI clock
        if (r_clk_counter.read() == 0) {
            r_clk_counter = r_divider.read();
            r_spi_clk = !r_spi_clk.read();
            r_spi_clk_ignore = false;
        } else {
            r_clk_counter = r_clk_counter.read() - 1;
        }
        break;
      }
    }
    //////////////////////////////////////////////////////////////////////////////
    // The initiator FSM executes a loop, transfering one block per iteration.
    // Each block is split in bursts, and the number of bursts depends
    // on the memory buffer alignment on a burst boundary:
    // - If buffer aligned, all burst have the same length (m_words_per burst)
    //   and the number of bursts is (m_bursts_per_block).
    // - If buffer not aligned, the number of bursts is (m_bursts_per_block + 1)
    //   and first and last burst are shorter, because all words in a burst 
    //   must be contained in a single cache line.
    //   first burst => nwords = m_words_per_burst - offset
    //   last  burst => nwords = offset
    //   other burst => nwords = m_words_per_burst
    //////////////////////////////////////////////////////////////////////////////

    switch( r_initiator_fsm.read() ) {
    ////////////
    case M_IDLE:        // check buffer alignment to compute the number of bursts
    {
        if ( false )  // XXX
        {
            r_index      = 0;
            r_block_count   = 0;
            r_burst_count   = 0;
            r_words_count   = 0;

            // compute r_burst_offset (zero when buffer aligned)
            r_burst_offset = (uint32_t)((r_buf_address.read()>>2) % m_words_per_burst);

            // start tranfer
            if ( r_read.read() )        r_initiator_fsm = M_READ_BLOCK;
            else                    r_initiator_fsm = M_WRITE_BURST;
        }
        break;
    } 
    //////////////////
    case M_READ_BLOCK:  // read one block from disk after waiting m_latency cycles
    {
        r_burst_count   = 0;
        r_words_count    = 0;
        r_initiator_fsm = M_READ_BURST;
        break;
    }
    //////////////////
    case M_READ_BURST:  // Compute the number of words and the number of flits in the burst
                        // The number of flits can be smaller than the number of words 
                        // in case of 8 bytes flits...
    {
        uint32_t nwords;
        uint32_t offset = r_burst_offset.read();

        if ( offset )             // buffer not aligned
        {
            if ( r_burst_count.read() == 0 ) nwords = m_words_per_burst - offset;
            else if ( r_burst_count.read() == m_bursts_per_block ) nwords = offset;
            else nwords = m_words_per_burst;
        }
        else                       // buffer aligned
        {
            nwords = m_words_per_burst;
        }

        r_burst_nwords  = nwords;
        r_initiator_fsm = M_READ_CMD;
        break;
    }
    ////////////////
    case M_READ_CMD:    // Send a multi-flits VCI WRITE command
    {
        if ( p_vci_initiator.cmdack.read() )
        {
            uint32_t nwords = r_burst_nwords.read() - r_words_count.read();

            if ( vci_param::B == 4 )    // one word per flit 
            {
                if ( nwords <= 1 )      // last flit
                {
                    r_initiator_fsm = M_READ_RSP;
                    r_words_count = 0;
                }
                else                // not the last flit
                {
                    r_words_count = r_words_count.read() + 1;
                }

                // compute next word address and next local buffer index
                r_buf_address = r_buf_address.read() + 4;
                r_index       = r_index.read() + 1;
            }
            else                        // 2 words per flit
            {
                if ( nwords <= 2 )      // last flit
                {
                    r_initiator_fsm = M_READ_RSP;
                    r_words_count = 0;
                }
                else                // not the last flit
                {
                    r_words_count = r_words_count.read() + 2;
                }
                    
                // compute next word address and next local buffer index
                if ( nwords == 1 )
                {
                    r_buf_address = r_buf_address.read() + 4;
                    r_index       = r_index.read() + 1;
                }
                else
                {
                    r_buf_address = r_buf_address.read() + 8;
                    r_index       = r_index.read() + 2;
                }
            }
        }
        break;
    }
    ////////////////
    case M_READ_RSP:    // Wait a single flit VCI WRITE response
    {
        if ( p_vci_initiator.rspval.read() )
        {
            bool aligned = (r_burst_offset.read() == 0);

            if ( (p_vci_initiator.rerror.read()&0x1) != 0 ) 
            {
                r_initiator_fsm = M_READ_ERROR;
#ifdef SOCLIB_MODULE_DEBUG
                std::cout << "vci_bd M_READ_ERROR" << std::endl;
#endif
            }
            else if ( (not aligned and (r_burst_count.read() == m_bursts_per_block)) or 
                      (aligned and (r_burst_count.read() == (m_bursts_per_block-1))) )
            {
                if ( r_block_count.read() == (r_nblocks.read()-1) ) // last burst of last block 
                {
                    r_initiator_fsm = M_READ_SUCCESS;
#ifdef SOCLIB_MODULE_DEBUG
                    std::cout << "vci_bd M_READ_SUCCESS" << std::endl;
#endif
                }
                else                                          // last burst not last block
                {
                    r_index       = 0;
                    r_burst_count    = 0;
                    r_block_count    = r_block_count.read() + 1;
                    r_initiator_fsm  = M_READ_BLOCK;
                }
            }
            else                                                // not the last burst
            {
                r_burst_count = r_burst_count.read() + 1;
                r_initiator_fsm = M_READ_BURST;
            }
        }
        break;
    }
    ///////////////////
    case M_READ_SUCCESS:
    case M_READ_ERROR:
    {
        if( !r_go ) r_initiator_fsm = M_IDLE;
        break;
    }
    ///////////////////
    case M_WRITE_BURST:  // Compute the number of words in the burst
    {
        uint32_t nwords;
        uint32_t offset = r_burst_offset.read();

        if ( offset )             // buffer not aligned
        {
            if ( r_burst_count.read() == 0 ) nwords = m_words_per_burst - offset;
            else if ( r_burst_count.read() == m_bursts_per_block ) nwords = offset;
            else nwords = m_words_per_burst;
        }
        else                       // buffer aligned
        {
            nwords = m_words_per_burst;
        }

        r_burst_nwords  = nwords;
        r_initiator_fsm =  M_WRITE_CMD;
        break;
    }
    /////////////////
    case M_WRITE_CMD:   // This is actually a single flit VCI READ command
    {
            if ( p_vci_initiator.cmdack.read() ) r_initiator_fsm = M_WRITE_RSP;
        break;
    }
    /////////////////
    case M_WRITE_RSP:   // This is actually a multi-words VCI READ response
    {
        if ( p_vci_initiator.rspval.read() )
        {
            bool aligned = (r_burst_offset.read() == 0);

            if ( (vci_param::B == 8) and (r_burst_nwords.read() > 1) )
            {
                r_local_buffer[r_index.read()]   = (uint32_t)p_vci_initiator.rdata.read();
                r_local_buffer[r_index.read()+1] = (uint32_t)(p_vci_initiator.rdata.read()>>32);
                r_index = r_index.read() + 2;
            }
            else
            {
                r_local_buffer[r_index.read()]   = (uint32_t)p_vci_initiator.rdata.read();
                r_index = r_index.read() + 1;
            }

            if ( p_vci_initiator.reop.read() )  // last flit of the burst
            {
                    r_words_count  = 0;
                r_buf_address = r_buf_address.read() + (r_burst_nwords.read()<<2); 

                    if( (p_vci_initiator.rerror.read()&0x1) != 0 ) 
                {
                    r_initiator_fsm = M_WRITE_ERROR;
#ifdef SOCLIB_MODULE_DEBUG
                    std::cout << "vci_bd M_WRITE_ERROR" << std::endl;
#endif
                }
                else if ( (not aligned and (r_burst_count.read() == m_bursts_per_block)) or 
                     (aligned and (r_burst_count.read() == (m_bursts_per_block-1))) ) // last burst
                {
                    r_initiator_fsm  = M_WRITE_BLOCK;
                }
                else                                      // not the last burst
                {
                    r_burst_count = r_burst_count.read() + 1;
                    r_initiator_fsm = M_WRITE_BURST;
                }
            }
            else
            {
                    r_words_count = r_words_count.read() + 1;
            }
        }
        break;
    }
    ///////////////////
    case M_WRITE_BLOCK:         // write a block to disk after waiting m_latency cycles
    {
        if ( r_block_count.read() == r_nblocks.read() - 1 ) 
        {
            r_initiator_fsm = M_WRITE_SUCCESS; 
#ifdef SOCLIB_MODULE_DEBUG
            std::cout << "vci_bd M_WRITE_SUCCESS" << std::endl;
#endif
        }
        else
        {
            r_burst_count    = 0;
            r_index       = 0;
            r_block_count    = r_block_count.read() + 1;
            r_initiator_fsm  = M_WRITE_BURST;
        }
        break;
    }
    /////////////////////
    case M_WRITE_SUCCESS:
    case M_WRITE_ERROR:
    {
        r_initiator_fsm = M_IDLE;
        break;
    }
    } // end switch r_initiator_fsm
}  // end transition

//////////////////////
tmpl(void)::genMoore()
{
    // p_vci_target port   
    p_vci_target.rsrcid = (sc_dt::sc_uint<vci_param::S>)r_srcid.read();
    p_vci_target.rtrdid = (sc_dt::sc_uint<vci_param::T>)r_trdid.read();
    p_vci_target.rpktid = (sc_dt::sc_uint<vci_param::P>)r_pktid.read();
    p_vci_target.reop   = true;

    switch(r_target_fsm) {
    case T_IDLE:
        p_vci_target.cmdack = true;
        p_vci_target.rspval = false;
        p_vci_target.rdata  = 0;
        break;
    case T_RSP_READ:
        p_vci_target.cmdack = false;
        p_vci_target.rspval = true;
        p_vci_target.rdata = r_rdata;
        p_vci_target.rerror = VCI_READ_OK;
        break;
    case T_RSP_WRITE:
        p_vci_target.cmdack = false;
        p_vci_target.rspval = true;
        p_vci_target.rdata  = 0;
        p_vci_target.rerror = VCI_WRITE_OK;
        break;
    case T_ERROR_READ:
        p_vci_target.cmdack = false;
        p_vci_target.rspval = true;
        p_vci_target.rdata  = 0;
        p_vci_target.rerror = VCI_READ_ERROR;
        break;
    case T_ERROR_WRITE:
        p_vci_target.cmdack = false;
        p_vci_target.rspval = true;
        p_vci_target.rdata  = 0;
        p_vci_target.rerror = VCI_WRITE_ERROR;
        break;
    } // end switch target fsm

    // p_vci_initiator port
    p_vci_initiator.srcid  = (sc_dt::sc_uint<vci_param::S>)m_srcid;
    p_vci_initiator.trdid  = 0;
    p_vci_initiator.contig = true;
    p_vci_initiator.cons   = false;
    p_vci_initiator.wrap   = false;
    p_vci_initiator.cfixed = false;
    p_vci_initiator.clen   = 0;

    switch (r_initiator_fsm) {
    case M_WRITE_CMD:           // It is actually a single flit VCI read command
        p_vci_initiator.rspack  = false;
        p_vci_initiator.cmdval  = true;
        p_vci_initiator.address = (sc_dt::sc_uint<vci_param::N>)r_buf_address.read();
        p_vci_initiator.cmd     = vci_param::CMD_READ;
        p_vci_initiator.pktid   = TYPE_READ_DATA_UNC; 
        p_vci_initiator.wdata   = 0;
        p_vci_initiator.be      = 0;
        p_vci_initiator.plen    = (sc_dt::sc_uint<vci_param::K>)(r_burst_nwords.read()<<2);
        p_vci_initiator.eop     = true;
        break;
    case M_READ_CMD:            // It is actually a multi-words VCI WRITE command 
        p_vci_initiator.rspack  = false;
        p_vci_initiator.cmdval  = true;
        p_vci_initiator.address = (sc_dt::sc_uint<vci_param::N>)r_buf_address.read(); 
        p_vci_initiator.cmd     = vci_param::CMD_WRITE;
        p_vci_initiator.pktid   = TYPE_WRITE;
        p_vci_initiator.plen    = (sc_dt::sc_uint<vci_param::K>)(r_burst_nwords.read()<<2);
        if ( (vci_param::B == 8) and ((r_burst_nwords.read() - r_words_count.read()) > 1) )  
        {
            p_vci_initiator.wdata = ((uint64_t)r_local_buffer[r_index.read()  ]) +
                                   (((uint64_t)r_local_buffer[r_index.read()+1]) << 32); 
            p_vci_initiator.be    = 0xFF;
            p_vci_initiator.eop   = ( (r_burst_nwords.read() - r_words_count.read()) <= 2 );
        }
        else
        {
            p_vci_initiator.wdata = r_local_buffer[r_index.read()];
            p_vci_initiator.be    = 0xF;
            p_vci_initiator.eop   = ( r_words_count.read() == (r_burst_nwords.read() - 1) );
        }
        break;
    case M_READ_RSP:
    case M_WRITE_RSP:
        p_vci_initiator.rspack  = true;
        p_vci_initiator.cmdval  = false;
        break;
    default:
        p_vci_initiator.rspack  = false;
        p_vci_initiator.cmdval  = false;
        break;
    }

    // SPI signals
    p_spi_ss = ((r_ss & 0x1) == 0);
    switch(r_spi_fsm) {
    case S_IDLE:
        p_spi_mosi = 0;
        p_spi_clk = 0;
        break;
    case S_XMIT:
        p_spi_clk = r_spi_clk ^ r_ctrl_cpol;
        p_spi_mosi = r_spi_out;
        break;
    }

    // IRQ signal
    p_irq = r_irq;
} // end GenMoore()

//////////////////////////////////////////////////////////////////////////////
tmpl(/**/)::VciSpi( sc_core::sc_module_name           name, 
                                const soclib::common::MappingTable   &mt,
                                const soclib::common::IntTab     &srcid,
                                const soclib::common::IntTab     &tgtid,
                                const uint32_t                 burst_size)

: caba::BaseModule(name),
        m_seglist(mt.getSegmentList(tgtid)),
        m_srcid(mt.indexForId(srcid)),
        m_words_per_block(512/4),
        m_words_per_burst(burst_size/4),
        m_bursts_per_block(512/burst_size),
        p_clk("p_clk"),
        p_resetn("p_resetn"),
        p_vci_initiator("p_vci_initiator"),
        p_vci_target("p_vci_target"),
        p_irq("p_irq"),
        p_spi_ss("p_spi_ss"),
        p_spi_clk("p_spi_clk"),
        p_spi_mosi("p_spi_mosi"),
        p_spi_miso("p_spi_miso")
{
    std::cout << "  - Building VciSpi " << name << std::endl;

        SC_METHOD(transition);
    dont_initialize();
    sensitive << p_clk.pos();

        SC_METHOD(genMoore);
    dont_initialize();
    sensitive << p_clk.neg();

    size_t nbsegs = 0;
    std::list<soclib::common::Segment>::iterator seg;
    for ( seg = m_seglist.begin() ; seg != m_seglist.end() ; seg++ ) 
    {
        nbsegs++;
        
            if ( (seg->baseAddress() & 0x0000003F) != 0 ) 
            {
                    std::cout << "Error in component VciSpi : " << name 
                              << "The base address of segment " << seg->name()
                      << " must be multiple of 64 bytes" << std::endl;
                    exit(1);
            }
            if ( seg->size() < 64 ) 
            {
                    std::cout << "Error in component VciSpi : " << name 
                          << "The size of segment " << seg->name()
                      << " cannot be smaller than 64 bytes" << std::endl;
                    exit(1);
            }
        std::cout << "    => segment " << seg->name()
                  << " / base = " << std::hex << seg->baseAddress()
                  << " / size = " << seg->size() << std::endl; 
    }

    if( nbsegs == 0 )
    {
                std::cout << "Error in component VciSpi : " << name
                          << " No segment allocated" << std::endl;
                exit(1);
    }

    if( (burst_size != 8 ) && 
                (burst_size != 16) && 
                (burst_size != 32) && 
                (burst_size != 64) )
        {
                std::cout << "Error in component VciSpi : " << name 
                          << " The burst size must be 8, 16, 32 or 64 bytes" << std::endl;
                exit(1);
        }

        if ( (vci_param::B != 4) and (vci_param::B != 8) )
        {
                std::cout << "Error in component VciSpi : " << name           
                          << " The VCI data fields must have 32 bits or 64 bits" << std::endl;
                exit(1);
        }

        r_local_buffer = new uint32_t[m_words_per_block];

} // end constructor

tmpl(/**/)::~VciSpi()
{
    delete [] r_local_buffer;
}


//////////////////////////
tmpl(void)::print_trace()
{
        const char* initiator_str[] = 
    {
                "M_IDLE",

                "M_READ_BLOCK",
                "M_READ_BURST",
                "M_READ_CMD",
                "M_READ_RSP",
                "M_READ_SUCCESS",
                "M_READ_ERROR",

                "M_WRITE_BURST",
                "M_WRITE_CMD",
                "M_WRITE_RSP",
                "M_WRITE_BLOCK",
                "M_WRITE_SUCCESS",
                "M_WRITE_ERROR",
        };
        const char* target_str[] = 
        {
                "T_IDLE",
                "T_RSP_READ",
                "T_RSP_WRITE",
                "T_ERROR_READ",
                "T_ERROR_WRITE",
        };
        const char* spi_str[] = 
        {
                "S_IDLE",
                "S_XMIT",
        };

        std::cout << name() << " _TGT : " << target_str[r_target_fsm.read()] 
            << std::endl;
        std::cout << name() << " _SPI : " << spi_str[r_spi_fsm.read()] 
            << " clk_counter " << r_clk_counter.read()
            << " r_bit_count " << r_bit_count.read() << std::endl;
        std::cout << name() << " _SPI : "
            << " r_spi_clk " << r_spi_clk.read()
            << " cpol " << r_ctrl_cpol.read()
            << " cpha " << r_ctrl_cpha.read()
            << " r_spi_clk_ignore " << r_spi_clk_ignore.read()
            << " r_txrx 0x" << std::hex
            << r_txrx[1].read() << " " << r_txrx[0].read()
            << std::endl;
        std::cout << name() << "  _INI : " << initiator_str[r_initiator_fsm.read()] 
          << "  buf = " << std::hex << r_buf_address.read()
          << "  block = " << std::dec << r_block_count.read() 
          << "  burst = " << r_burst_count.read() 
          << "  word  = " << r_words_count.read() <<std::endl; 
}

}} // end namespace

// Local Variables:
// tab-width: 4
// c-basic-offset: 4
// c-file-offsets:((innamespace . 0)(inline-open . 0))
// indent-tabs-mode: nil
// End:

// vim: filetype=cpp:expandtab:shiftwidth=4:tabstop=4:softtabstop=4