|
Last change
on this file since 623 was
623,
checked in by alain, 11 years ago
|
|
Introducing the soft_hello_giet application.
|
|
File size:
1.8 KB
|
| Rev | Line | |
|---|
| [623] | 1 | /********************************************************** |
|---|
| 2 | File : ldscript |
|---|
| 3 | Author : Alain Greiner |
|---|
| 4 | Date : January 2014 |
|---|
| 5 | **********************************************************/ |
|---|
| 6 | |
|---|
| 7 | /* definition of the base address for all segments |
|---|
| 8 | The peripherals base addresses are referenced by the |
|---|
| 9 | software drivers and must be defined, even if the |
|---|
| 10 | peripherals are not present in the architecture */ |
|---|
| 11 | |
|---|
| 12 | seg_reset_base = 0x00000000; /* boot code */ |
|---|
| 13 | |
|---|
| 14 | seg_kcode_base = 0x00010000; /* kernel code */ |
|---|
| 15 | seg_kdata_base = 0x00020000; /* kernel cacheable data */ |
|---|
| 16 | seg_kunc_base = 0x00030000; /* kernel uncacheable data */ |
|---|
| 17 | |
|---|
| 18 | seg_code_base = 0x00040000; /* application code */ |
|---|
| 19 | seg_data_base = 0x00050000; /* application data */ |
|---|
| 20 | |
|---|
| 21 | seg_heap_base = 0x00100000; /* heaps for application tasks */ |
|---|
| 22 | seg_stack_base = 0x00300000; /* stacks */ |
|---|
| 23 | |
|---|
| 24 | seg_xcu_base = 0xF0000000; /* controler XCU */ |
|---|
| 25 | seg_tty_base = 0xF2000000; /* controler TTY */ |
|---|
| 26 | seg_fbf_base = 0xF3000000; /* controler FBF */ |
|---|
| 27 | seg_ioc_base = 0xF4000000; /* controler IOC */ |
|---|
| 28 | seg_mmc_base = 0xFF000000; /* config MMC */ |
|---|
| 29 | |
|---|
| 30 | |
|---|
| 31 | /* Grouping sections into segments */ |
|---|
| 32 | |
|---|
| 33 | SECTIONS |
|---|
| 34 | { |
|---|
| 35 | . = seg_kcode_base; |
|---|
| 36 | seg_kcode : { |
|---|
| 37 | *(.giet) |
|---|
| 38 | *(.switch) |
|---|
| 39 | *(.drivers) |
|---|
| 40 | *(.isr) |
|---|
| 41 | } |
|---|
| 42 | . = seg_kdata_base; |
|---|
| 43 | seg_kdata : { |
|---|
| 44 | *(.kdata) |
|---|
| 45 | } |
|---|
| 46 | . = seg_kunc_base; |
|---|
| 47 | seg_kunc : { |
|---|
| 48 | *(.unckdata) |
|---|
| 49 | } |
|---|
| 50 | . = seg_kdata_base; |
|---|
| 51 | seg_kdata : { |
|---|
| 52 | *(.ksave) |
|---|
| 53 | } |
|---|
| 54 | . = seg_code_base; |
|---|
| 55 | seg_code : { |
|---|
| 56 | *(.text) |
|---|
| 57 | } |
|---|
| 58 | . = seg_reset_base; |
|---|
| 59 | seg_reset : { |
|---|
| 60 | *(.reset) |
|---|
| 61 | } |
|---|
| 62 | . = seg_data_base; |
|---|
| 63 | seg_data : { |
|---|
| 64 | *(.rodata) |
|---|
| 65 | . = ALIGN(4); |
|---|
| 66 | *(.rodata.*) |
|---|
| 67 | . = ALIGN(4); |
|---|
| 68 | *(.data) |
|---|
| 69 | . = ALIGN(4); |
|---|
| 70 | *(.sdata) |
|---|
| 71 | . = ALIGN(4); |
|---|
| 72 | *(.bss) |
|---|
| 73 | *(COMMON) |
|---|
| 74 | *(.sbss) |
|---|
| 75 | } |
|---|
| 76 | } |
|---|
| 77 | |
|---|
Note: See
TracBrowser
for help on using the repository browser.
