Last change
on this file since 991 was
810,
checked in by cfuguet, 10 years ago
|
giet_tsar: updating giet_tsar to use new hard_config format
Other optimizations:
- Using a memory lock instead of the hard lock for the TTY
- Each tty channel data is aligned to a cacheline (lock and buffers).
- The applications' ldscript is generated from a template which
includes the hard_config.h file.
|
File size:
2.2 KB
|
Rev | Line | |
---|
[810] | 1 | /** |
---|
| 2 | * \file : giet.ld.in |
---|
| 3 | * \author : Cesar Fuguet |
---|
| 4 | * \date : September 19, 2014 |
---|
| 5 | * |
---|
| 6 | * \brief : giet ldscript template |
---|
| 7 | * \note : must be compiled with gcc to generate an instance |
---|
| 8 | */ |
---|
| 9 | |
---|
| 10 | #include <hard_config.h> |
---|
| 11 | |
---|
| 12 | seg_reset_base = RESET_ADDRESS; /* boot code */ |
---|
| 13 | |
---|
| 14 | seg_kcode_base = SEG_RAM_BASE + 0x10000; /* kernel code */ |
---|
| 15 | seg_kdata_base = SEG_RAM_BASE + 0x20000; /* kernel cacheable data */ |
---|
| 16 | seg_kunc_base = SEG_RAM_BASE + 0x30000; /* kernel uncacheable data */ |
---|
| 17 | seg_code_base = SEG_RAM_BASE + 0x40000; /* application code */ |
---|
| 18 | seg_data_base = SEG_RAM_BASE + 0x50000; /* application data */ |
---|
| 19 | seg_heap_base = SEG_RAM_BASE + 0x100000; /* heaps for applications */ |
---|
| 20 | seg_stack_base = SEG_RAM_BASE + 0x300000; /* stacks ifor applications */ |
---|
| 21 | seg_ramdisk_base = SEG_RAM_BASE + 0x800000; /* virtual disk */ |
---|
| 22 | |
---|
| 23 | seg_xcu_base = SEG_XCU_BASE; /* controler XCU */ |
---|
| 24 | seg_tty_base = SEG_TTY_BASE; /* controler TTY */ |
---|
| 25 | seg_fbf_base = SEG_FBF_BASE; /* controler FBF */ |
---|
| 26 | seg_ioc_base = SEG_IOC_BASE; /* controler IOC */ |
---|
| 27 | seg_nic_base = SEG_NIC_BASE; /* controler NIC */ |
---|
| 28 | seg_cma_base = SEG_CMA_BASE; /* controler CMA */ |
---|
| 29 | seg_pic_base = SEG_PIC_BASE; /* controler PIC */ |
---|
| 30 | seg_mmc_base = SEG_MMC_BASE; /* config MMC */ |
---|
| 31 | |
---|
| 32 | /* Grouping sections into segments */ |
---|
| 33 | |
---|
| 34 | ENTRY(reset) |
---|
| 35 | |
---|
| 36 | SECTIONS |
---|
| 37 | { |
---|
| 38 | . = seg_kcode_base; |
---|
| 39 | seg_kcode : { |
---|
| 40 | *(.giet) |
---|
| 41 | *(.switch) |
---|
| 42 | *(.drivers) |
---|
| 43 | *(.isr) |
---|
| 44 | } |
---|
| 45 | . = seg_kdata_base; |
---|
| 46 | seg_kdata : { |
---|
| 47 | *(.kdata) |
---|
| 48 | } |
---|
| 49 | . = seg_kunc_base; |
---|
| 50 | seg_kunc : { |
---|
| 51 | *(.unckdata) |
---|
| 52 | } |
---|
| 53 | . = seg_kdata_base; |
---|
| 54 | seg_kdata : { |
---|
| 55 | *(.ksave) |
---|
| 56 | } |
---|
| 57 | . = seg_code_base; |
---|
| 58 | seg_code : { |
---|
| 59 | *(.text) |
---|
| 60 | } |
---|
| 61 | . = seg_reset_base; |
---|
| 62 | seg_reset : { |
---|
| 63 | *(.reset) |
---|
| 64 | } |
---|
| 65 | . = seg_data_base; |
---|
| 66 | seg_data : { |
---|
| 67 | *(.rodata) |
---|
| 68 | . = ALIGN(4); |
---|
| 69 | *(.rodata.*) |
---|
| 70 | . = ALIGN(4); |
---|
| 71 | *(.data) |
---|
| 72 | . = ALIGN(4); |
---|
| 73 | *(.sdata) |
---|
| 74 | . = ALIGN(4); |
---|
| 75 | *(.bss) |
---|
| 76 | *(COMMON) |
---|
| 77 | *(.sbss) |
---|
| 78 | } |
---|
| 79 | } |
---|
Note: See
TracBrowser
for help on using the repository browser.