| 1 | /********************************************************** |
|---|
| 2 | File : ldscript |
|---|
| 3 | Author : Alain Greiner |
|---|
| 4 | Date : March 2011 |
|---|
| 5 | **********************************************************/ |
|---|
| 6 | |
|---|
| 7 | /* definition of various hardware parameters. |
|---|
| 8 | These variables are referenced in the drivers.c file, |
|---|
| 9 | and must be defined, even if the corresponding |
|---|
| 10 | peripherals are not present in the architecture */ |
|---|
| 11 | |
|---|
| 12 | NB_CLUSTERS = 4; /* number of clusters */ |
|---|
| 13 | NB_PROCS = 4; /* number of processors per cluster */ |
|---|
| 14 | NB_TASKS = 1; /* number of tasks per processor */ |
|---|
| 15 | NB_TIMERS = 1; /* max number of timers per processor */ |
|---|
| 16 | NB_LOCKS = 8; /* number of spin_locks */ |
|---|
| 17 | |
|---|
| 18 | /* definition of the base address for all segments |
|---|
| 19 | The peripherals base addresses are referenced by the |
|---|
| 20 | software drivers and must be defined, even if the |
|---|
| 21 | peripherals are not present in the architecture */ |
|---|
| 22 | |
|---|
| 23 | seg_code_base = 0x00000000; /* le code utilisateur */ |
|---|
| 24 | seg_data_base = 0x00100000; /* les données utilisateur */ |
|---|
| 25 | |
|---|
| 26 | seg_heap_base = 0x00300000; /* le tas utilisateur */ |
|---|
| 27 | seg_stack_base = 0x00800000; /* la pile utilisateur */ |
|---|
| 28 | |
|---|
| 29 | seg_kcode_base = 0x80000000; /* le code du système */ |
|---|
| 30 | seg_kdata_base = 0x80100000; /* les donnees du système */ |
|---|
| 31 | seg_kunc_base = 0x80200000; /* les données non cachées du système */ |
|---|
| 32 | |
|---|
| 33 | seg_icu_base = 0x00F00000; /* controleur ICU */ |
|---|
| 34 | seg_tty_base = 0xBFF20000; /* controleur TTY */ |
|---|
| 35 | seg_dma_base = 0x00F30000; /* controleur DMA */ |
|---|
| 36 | |
|---|
| 37 | seg_reset_base = 0xBFC00000; /* le code de boot */ |
|---|
| 38 | seg_fb_base = 0xBFD00000; /* controleur FRAME BUFFER */ |
|---|
| 39 | seg_ioc_base = 0xBFF10000; /* controleur I/O */ |
|---|
| 40 | |
|---|
| 41 | seg_timer_base = 0x00F00000; /* controleur TIMER */ |
|---|
| 42 | seg_gcd_base = 0xBFF50000; /* controleur GCD */ |
|---|
| 43 | |
|---|
| 44 | /* Grouping sections into segments */ |
|---|
| 45 | |
|---|
| 46 | SECTIONS |
|---|
| 47 | { |
|---|
| 48 | . = seg_kcode_base; |
|---|
| 49 | seg_kcode : { |
|---|
| 50 | *(.giet) |
|---|
| 51 | *(.switch) |
|---|
| 52 | *(.drivers) |
|---|
| 53 | *(.isr) |
|---|
| 54 | } |
|---|
| 55 | . = seg_kdata_base; |
|---|
| 56 | seg_kdata : { |
|---|
| 57 | *(.kdata) |
|---|
| 58 | } |
|---|
| 59 | . = seg_kunc_base; |
|---|
| 60 | seg_kunc : { |
|---|
| 61 | *(.unckdata) |
|---|
| 62 | } |
|---|
| 63 | . = seg_kdata_base; |
|---|
| 64 | seg_kdata : { |
|---|
| 65 | *(.ksave) |
|---|
| 66 | } |
|---|
| 67 | . = seg_code_base; |
|---|
| 68 | seg_code : { |
|---|
| 69 | *(.text) |
|---|
| 70 | } |
|---|
| 71 | . = seg_reset_base; |
|---|
| 72 | seg_reset : { |
|---|
| 73 | *(.reset) |
|---|
| 74 | } |
|---|
| 75 | . = seg_data_base; |
|---|
| 76 | seg_data : { |
|---|
| 77 | *(.rodata) |
|---|
| 78 | . = ALIGN(4); |
|---|
| 79 | *(.rodata.*) |
|---|
| 80 | . = ALIGN(4); |
|---|
| 81 | *(.data) |
|---|
| 82 | . = ALIGN(4); |
|---|
| 83 | *(.sdata) |
|---|
| 84 | . = ALIGN(4); |
|---|
| 85 | *(.bss) |
|---|
| 86 | *(COMMON) |
|---|
| 87 | *(.sbss) |
|---|
| 88 | } |
|---|
| 89 | } |
|---|
| 90 | |
|---|
