Last change
on this file since 260 was
232,
checked in by alain, 12 years ago
|
Introducing the elementary tests for a TSAR mono-cluster
mono-processor platform with MMU using the vci_cc_vcache_v4
such as the "tsarv4_mono_mmu".
(assemby level tests written by Manuel Bouyer)
|
File size:
1.3 KB
|
Rev | Line | |
---|
[232] | 1 | /* |
---|
| 2 | * Check that we can take an interrupt, and return from it. |
---|
| 3 | * We use a software-triggerted interrupt. |
---|
| 4 | */ |
---|
| 5 | #include <registers.h> |
---|
| 6 | #include <misc.h> |
---|
| 7 | |
---|
| 8 | |
---|
| 9 | .text |
---|
| 10 | .globl _start |
---|
| 11 | _start: |
---|
| 12 | .set noreorder |
---|
| 13 | la k0, TTY_BASE |
---|
| 14 | la k1, EXIT_BASE |
---|
| 15 | |
---|
| 16 | /* reset cop0 status (keep BEV), enbale soft interrupt 0 */ |
---|
| 17 | lui a0, 0x0040; |
---|
| 18 | addiu a0, 0x0101; |
---|
| 19 | mtc0 a0, COP0_STATUS |
---|
| 20 | |
---|
| 21 | /* reset cause, make sure IV is off */ |
---|
| 22 | mtc0 zero, COP0_CAUSE |
---|
| 23 | |
---|
| 24 | PRINT(startstr) |
---|
| 25 | |
---|
| 26 | /* generate an interrupt */ |
---|
| 27 | mfc0 a0, COP0_CAUSE |
---|
| 28 | nop |
---|
| 29 | ori a0, 0x0100 |
---|
| 30 | mtc0 a0, COP0_CAUSE |
---|
| 31 | li a0, MAGIC1 |
---|
| 32 | PRINTX |
---|
| 33 | PUTCHAR('\n') |
---|
| 34 | /* we should end here after taking the exeption */ |
---|
| 35 | EXIT(0) |
---|
| 36 | |
---|
| 37 | .globl excep |
---|
| 38 | excep: |
---|
| 39 | .set noreorder |
---|
| 40 | PRINT(statusstr) |
---|
| 41 | mfc0 a0, COP0_STATUS |
---|
| 42 | PRINTX |
---|
| 43 | |
---|
| 44 | PRINT(causestr) |
---|
| 45 | mfc0 a0, COP0_CAUSE |
---|
| 46 | PRINTX |
---|
| 47 | |
---|
| 48 | PRINT(pcstr) |
---|
| 49 | mfc0 a0, COP0_EXPC |
---|
| 50 | PRINTX |
---|
| 51 | |
---|
| 52 | PRINT(badvastr) |
---|
| 53 | mfc0 a0, COP_0_BADVADDR |
---|
| 54 | PRINTX |
---|
| 55 | |
---|
| 56 | PUTCHAR('\n') |
---|
| 57 | /* clear interrupt */ |
---|
| 58 | mfc0 a0, COP0_CAUSE |
---|
| 59 | xori a0, 0x100 |
---|
| 60 | mtc0 a0, COP0_CAUSE |
---|
| 61 | nop |
---|
| 62 | eret |
---|
| 63 | /* we should not end there */ |
---|
| 64 | EXIT(1) |
---|
| 65 | |
---|
| 66 | .rodata: |
---|
| 67 | statusstr: .ascii "status \0" |
---|
| 68 | causestr: .ascii " cause \0" |
---|
| 69 | pcstr: .ascii " pc \0" |
---|
| 70 | badvastr: .ascii " badva \0" |
---|
| 71 | startstr: .ascii "start\n\0" |
---|
| 72 | eretstr: .ascii "eret\n\0" |
---|
| 73 | |
---|
| 74 | .org EXCEP_ADDRESS - BOOT_ADDRESS |
---|
| 75 | .globl evect |
---|
| 76 | evect: |
---|
| 77 | j excep |
---|
| 78 | nop |
---|
| 79 | .data |
---|
| 80 | myvar: .word 0 |
---|
Note: See
TracBrowser
for help on using the repository browser.