|
Last change
on this file since 276 was
232,
checked in by alain, 13 years ago
|
|
Introducing the elementary tests for a TSAR mono-cluster
mono-processor platform with MMU using the vci_cc_vcache_v4
such as the "tsarv4_mono_mmu".
(assemby level tests written by Manuel Bouyer)
|
|
File size:
1.7 KB
|
| Line | |
|---|
| 1 | /* |
|---|
| 2 | * Check that we can take an interrupt from the xicu timer0 |
|---|
| 3 | */ |
|---|
| 4 | #include <registers.h> |
|---|
| 5 | #include <misc.h> |
|---|
| 6 | #include <xicu.h> |
|---|
| 7 | |
|---|
| 8 | .text |
|---|
| 9 | .globl _start |
|---|
| 10 | _start: |
|---|
| 11 | .set noreorder |
|---|
| 12 | la k0, TTY_BASE |
|---|
| 13 | la k1, EXIT_BASE |
|---|
| 14 | |
|---|
| 15 | /* reset cause, make sure IV is off */ |
|---|
| 16 | mtc0 zero, COP0_CAUSE |
|---|
| 17 | |
|---|
| 18 | PRINT(startstr) |
|---|
| 19 | |
|---|
| 20 | /* program xicu */ |
|---|
| 21 | la t0, XICU_BASE |
|---|
| 22 | /* clear pending interrupt */ |
|---|
| 23 | lw a0, XICU_PTI_ACK(0)(t0) |
|---|
| 24 | /* route PTI0 to irq 0 */ |
|---|
| 25 | li a0, 1 << 0 |
|---|
| 26 | sw a0, XICU_MSK_PTI_E(0)(t0) |
|---|
| 27 | /* init s0 */ |
|---|
| 28 | li s0, MAGIC2 |
|---|
| 29 | /* |
|---|
| 30 | * interrupt in 42 cycles. |
|---|
| 31 | * Without cache this takes us to the delay slot of the jump. |
|---|
| 32 | */ |
|---|
| 33 | li a0, 42 |
|---|
| 34 | sw a0, XICU_PTI_PER(0)(t0) |
|---|
| 35 | /* clear pending interrupt */ |
|---|
| 36 | lw a0, XICU_PTI_ACK(0)(t0) |
|---|
| 37 | /* reset cop0 status (keep BEV), enable interrupt 0 */ |
|---|
| 38 | lui a0, 0x0040; |
|---|
| 39 | addiu a0, 0x0401; |
|---|
| 40 | mtc0 a0, COP0_STATUS |
|---|
| 41 | |
|---|
| 42 | nop |
|---|
| 43 | nop |
|---|
| 44 | nop |
|---|
| 45 | j end |
|---|
| 46 | li s0, MAGIC1 |
|---|
| 47 | nop |
|---|
| 48 | /* we should not end there */ |
|---|
| 49 | EXIT(1) |
|---|
| 50 | |
|---|
| 51 | end: |
|---|
| 52 | PRINT(endstr) |
|---|
| 53 | move a0, s0 |
|---|
| 54 | PRINTX |
|---|
| 55 | PUTCHAR('\n') |
|---|
| 56 | EXIT(0) |
|---|
| 57 | |
|---|
| 58 | .globl excep |
|---|
| 59 | excep: |
|---|
| 60 | .set noreorder |
|---|
| 61 | /* disable timer0 */ |
|---|
| 62 | la t0, XICU_BASE |
|---|
| 63 | sw zero, XICU_PTI_PER(0)(t0) |
|---|
| 64 | PRINT(statusstr) |
|---|
| 65 | mfc0 a0, COP0_STATUS |
|---|
| 66 | PRINTX |
|---|
| 67 | |
|---|
| 68 | PRINT(causestr) |
|---|
| 69 | mfc0 a0, COP0_CAUSE |
|---|
| 70 | PRINTX |
|---|
| 71 | |
|---|
| 72 | PRINT(pcstr) |
|---|
| 73 | mfc0 a0, COP0_EXPC |
|---|
| 74 | PRINTX |
|---|
| 75 | |
|---|
| 76 | PRINT(badvastr) |
|---|
| 77 | mfc0 a0, COP_0_BADVADDR |
|---|
| 78 | PRINTX |
|---|
| 79 | |
|---|
| 80 | PRINT(xicustr) |
|---|
| 81 | la t0, XICU_BASE |
|---|
| 82 | lw a0, XICU_PRIO(0)(t0) |
|---|
| 83 | PRINTX |
|---|
| 84 | |
|---|
| 85 | PUTCHAR('\n') |
|---|
| 86 | /* clear interrupt */ |
|---|
| 87 | mfc0 a0, COP0_CAUSE |
|---|
| 88 | andi t0, a0, 0xff00 |
|---|
| 89 | xor a0, a0, t0 |
|---|
| 90 | mtc0 a0, COP0_CAUSE |
|---|
| 91 | eret |
|---|
| 92 | /* we should not end there */ |
|---|
| 93 | EXIT(1) |
|---|
| 94 | |
|---|
| 95 | .rodata: |
|---|
| 96 | statusstr: .ascii "status \0" |
|---|
| 97 | causestr: .ascii " cause \0" |
|---|
| 98 | pcstr: .ascii " pc \0" |
|---|
| 99 | badvastr: .ascii " badva \0" |
|---|
| 100 | xicustr: .ascii " xicu \0" |
|---|
| 101 | startstr: .ascii "start\n\0" |
|---|
| 102 | endstr: .ascii "end \0" |
|---|
| 103 | |
|---|
| 104 | .org EXCEP_ADDRESS - BOOT_ADDRESS |
|---|
| 105 | .globl evect |
|---|
| 106 | evect: |
|---|
| 107 | j excep |
|---|
| 108 | nop |
|---|
| 109 | .data |
|---|
| 110 | myvar: .word 0 |
|---|
Note: See
TracBrowser
for help on using the repository browser.
