source: trunk/softs/tsar_boot/Doxyfile @ 991

Last change on this file since 991 was 758, checked in by cfuguet, 10 years ago

tsar_boot: improving configuration infrastructure

  • Using hard_config.h which respects the same sintax that the hard_config.h file of all TSAR platforms. This file can be then generated by the GIET-VM genmap tool or written manually.
  • All peripheral drivers have been moved to a drivers directory and they are compiled as a static library. This allows GCC to only include in the final .ELF the object files of used peripherals and not all of them.
  • Example hard_config.h and ldscripts have been introduced in the conf directory.
  • Improving comments in all files
File size: 78.0 KB
Line 
1# Doxyfile 1.8.3.1
2
3# This file describes the settings to be used by the documentation system
4# doxygen (www.doxygen.org) for a project.
5#
6# All text after a hash (#) is considered a comment and will be ignored.
7# The format is:
8#       TAG = value [value, ...]
9# For lists items can also be appended using:
10#       TAG += value [value, ...]
11# Values that contain spaces should be placed between quotes (" ").
12
13#---------------------------------------------------------------------------
14# Project related configuration options
15#---------------------------------------------------------------------------
16
17# This tag specifies the encoding used for all characters in the config file
18# that follow. The default is UTF-8 which is also the encoding used for all
19# text before the first occurrence of this tag. Doxygen uses libiconv (or the
20# iconv built into libc) for the transcoding. See
21# http://www.gnu.org/software/libiconv for the list of possible encodings.
22
23DOXYFILE_ENCODING      = UTF-8
24
25# The PROJECT_NAME tag is a single word (or sequence of words) that should
26# identify the project. Note that if you do not use Doxywizard you need
27# to put quotes around the project name if it contains spaces.
28
29PROJECT_NAME           = "TSAR Pre-loader"
30
31# The PROJECT_NUMBER tag can be used to enter a project or revision number.
32# This could be handy for archiving the generated documentation or
33# if some version control system is used.
34
35PROJECT_NUMBER         =
36
37# Using the PROJECT_BRIEF tag one can provide an optional one line description
38# for a project that appears at the top of each page and should give viewer
39# a quick idea about the purpose of the project. Keep the description short.
40
41PROJECT_BRIEF          =
42
43# With the PROJECT_LOGO tag one can specify an logo or icon that is
44# included in the documentation. The maximum height of the logo should not
45# exceed 55 pixels and the maximum width should not exceed 200 pixels.
46# Doxygen will copy the logo to the output directory.
47
48PROJECT_LOGO           =
49
50# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
51# base path where the generated documentation will be put.
52# If a relative path is entered, it will be relative to the location
53# where doxygen was started. If left blank the current directory will be used.
54
55OUTPUT_DIRECTORY       = doc
56
57# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
58# 4096 sub-directories (in 2 levels) under the output directory of each output
59# format and will distribute the generated files over these directories.
60# Enabling this option can be useful when feeding doxygen a huge amount of
61# source files, where putting all generated files in the same directory would
62# otherwise cause performance problems for the file system.
63
64CREATE_SUBDIRS         = NO
65
66# The OUTPUT_LANGUAGE tag is used to specify the language in which all
67# documentation generated by doxygen is written. Doxygen will use this
68# information to generate all constant output in the proper language.
69# The default language is English, other supported languages are:
70# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
71# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
72# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
73# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
74# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
75# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
76
77OUTPUT_LANGUAGE        = English
78
79# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
80# include brief member descriptions after the members that are listed in
81# the file and class documentation (similar to JavaDoc).
82# Set to NO to disable this.
83
84BRIEF_MEMBER_DESC      = YES
85
86# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
87# the brief description of a member or function before the detailed description.
88# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
89# brief descriptions will be completely suppressed.
90
91REPEAT_BRIEF           = YES
92
93# This tag implements a quasi-intelligent brief description abbreviator
94# that is used to form the text in various listings. Each string
95# in this list, if found as the leading text of the brief description, will be
96# stripped from the text and the result after processing the whole list, is
97# used as the annotated text. Otherwise, the brief description is used as-is.
98# If left blank, the following values are used ("$name" is automatically
99# replaced with the name of the entity): "The $name class" "The $name widget"
100# "The $name file" "is" "provides" "specifies" "contains"
101# "represents" "a" "an" "the"
102
103ABBREVIATE_BRIEF       =
104
105# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
106# Doxygen will generate a detailed section even if there is only a brief
107# description.
108
109ALWAYS_DETAILED_SEC    = NO
110
111# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
112# inherited members of a class in the documentation of that class as if those
113# members were ordinary class members. Constructors, destructors and assignment
114# operators of the base classes will not be shown.
115
116INLINE_INHERITED_MEMB  = NO
117
118# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
119# path before files name in the file list and in the header files. If set
120# to NO the shortest path that makes the file name unique will be used.
121
122FULL_PATH_NAMES        = YES
123
124# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
125# can be used to strip a user-defined part of the path. Stripping is
126# only done if one of the specified strings matches the left-hand part of
127# the path. The tag can be used to show relative paths in the file list.
128# If left blank the directory from which doxygen is run is used as the
129# path to strip. Note that you specify absolute paths here, but also
130# relative paths, which will be relative from the directory where doxygen is
131# started.
132
133STRIP_FROM_PATH        =
134
135# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
136# the path mentioned in the documentation of a class, which tells
137# the reader which header file to include in order to use a class.
138# If left blank only the name of the header file containing the class
139# definition is used. Otherwise one should specify the include paths that
140# are normally passed to the compiler using the -I flag.
141
142STRIP_FROM_INC_PATH    =
143
144# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
145# (but less readable) file names. This can be useful if your file system
146# doesn't support long names like on DOS, Mac, or CD-ROM.
147
148SHORT_NAMES            = NO
149
150# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
151# will interpret the first line (until the first dot) of a JavaDoc-style
152# comment as the brief description. If set to NO, the JavaDoc
153# comments will behave just like regular Qt-style comments
154# (thus requiring an explicit @brief command for a brief description.)
155
156JAVADOC_AUTOBRIEF      = NO
157
158# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
159# interpret the first line (until the first dot) of a Qt-style
160# comment as the brief description. If set to NO, the comments
161# will behave just like regular Qt-style comments (thus requiring
162# an explicit \brief command for a brief description.)
163
164QT_AUTOBRIEF           = NO
165
166# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
167# treat a multi-line C++ special comment block (i.e. a block of //! or ///
168# comments) as a brief description. This used to be the default behaviour.
169# The new default is to treat a multi-line C++ comment block as a detailed
170# description. Set this tag to YES if you prefer the old behaviour instead.
171
172MULTILINE_CPP_IS_BRIEF = NO
173
174# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
175# member inherits the documentation from any documented member that it
176# re-implements.
177
178INHERIT_DOCS           = YES
179
180# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
181# a new page for each member. If set to NO, the documentation of a member will
182# be part of the file/class/namespace that contains it.
183
184SEPARATE_MEMBER_PAGES  = NO
185
186# The TAB_SIZE tag can be used to set the number of spaces in a tab.
187# Doxygen uses this value to replace tabs by spaces in code fragments.
188
189TAB_SIZE               = 4
190
191# This tag can be used to specify a number of aliases that acts
192# as commands in the documentation. An alias has the form "name=value".
193# For example adding "sideeffect=\par Side Effects:\n" will allow you to
194# put the command \sideeffect (or @sideeffect) in the documentation, which
195# will result in a user-defined paragraph with heading "Side Effects:".
196# You can put \n's in the value part of an alias to insert newlines.
197
198ALIASES                =
199
200# This tag can be used to specify a number of word-keyword mappings (TCL only).
201# A mapping has the form "name=value". For example adding
202# "class=itcl::class" will allow you to use the command class in the
203# itcl::class meaning.
204
205TCL_SUBST              =
206
207# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
208# sources only. Doxygen will then generate output that is more tailored for C.
209# For instance, some of the names that are used will be different. The list
210# of all members will be omitted, etc.
211
212OPTIMIZE_OUTPUT_FOR_C  = YES
213
214# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
215# sources only. Doxygen will then generate output that is more tailored for
216# Java. For instance, namespaces will be presented as packages, qualified
217# scopes will look different, etc.
218
219OPTIMIZE_OUTPUT_JAVA   = NO
220
221# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
222# sources only. Doxygen will then generate output that is more tailored for
223# Fortran.
224
225OPTIMIZE_FOR_FORTRAN   = NO
226
227# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
228# sources. Doxygen will then generate output that is tailored for
229# VHDL.
230
231OPTIMIZE_OUTPUT_VHDL   = NO
232
233# Doxygen selects the parser to use depending on the extension of the files it
234# parses. With this tag you can assign which parser to use for a given
235# extension. Doxygen has a built-in mapping, but you can override or extend it
236# using this tag. The format is ext=language, where ext is a file extension,
237# and language is one of the parsers supported by doxygen: IDL, Java,
238# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C,
239# C++. For instance to make doxygen treat .inc files as Fortran files (default
240# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note
241# that for custom extensions you also need to set FILE_PATTERNS otherwise the
242# files are not read by doxygen.
243
244EXTENSION_MAPPING      =
245
246# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all
247# comments according to the Markdown format, which allows for more readable
248# documentation. See http://daringfireball.net/projects/markdown/ for details.
249# The output of markdown processing is further processed by doxygen, so you
250# can mix doxygen, HTML, and XML commands with Markdown formatting.
251# Disable only in case of backward compatibilities issues.
252
253MARKDOWN_SUPPORT       = YES
254
255# When enabled doxygen tries to link words that correspond to documented classes,
256# or namespaces to their corresponding documentation. Such a link can be
257# prevented in individual cases by by putting a % sign in front of the word or
258# globally by setting AUTOLINK_SUPPORT to NO.
259
260AUTOLINK_SUPPORT       = YES
261
262# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
263# to include (a tag file for) the STL sources as input, then you should
264# set this tag to YES in order to let doxygen match functions declarations and
265# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
266# func(std::string) {}). This also makes the inheritance and collaboration
267# diagrams that involve STL classes more complete and accurate.
268
269BUILTIN_STL_SUPPORT    = NO
270
271# If you use Microsoft's C++/CLI language, you should set this option to YES to
272# enable parsing support.
273
274CPP_CLI_SUPPORT        = NO
275
276# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
277# Doxygen will parse them like normal C++ but will assume all classes use public
278# instead of private inheritance when no explicit protection keyword is present.
279
280SIP_SUPPORT            = NO
281
282# For Microsoft's IDL there are propget and propput attributes to indicate
283# getter and setter methods for a property. Setting this option to YES (the
284# default) will make doxygen replace the get and set methods by a property in
285# the documentation. This will only work if the methods are indeed getting or
286# setting a simple type. If this is not the case, or you want to show the
287# methods anyway, you should set this option to NO.
288
289IDL_PROPERTY_SUPPORT   = YES
290
291# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
292# tag is set to YES, then doxygen will reuse the documentation of the first
293# member in the group (if any) for the other members of the group. By default
294# all members of a group must be documented explicitly.
295
296DISTRIBUTE_GROUP_DOC   = NO
297
298# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
299# the same type (for instance a group of public functions) to be put as a
300# subgroup of that type (e.g. under the Public Functions section). Set it to
301# NO to prevent subgrouping. Alternatively, this can be done per class using
302# the \nosubgrouping command.
303
304SUBGROUPING            = YES
305
306# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and
307# unions are shown inside the group in which they are included (e.g. using
308# @ingroup) instead of on a separate page (for HTML and Man pages) or
309# section (for LaTeX and RTF).
310
311INLINE_GROUPED_CLASSES = NO
312
313# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and
314# unions with only public data fields will be shown inline in the documentation
315# of the scope in which they are defined (i.e. file, namespace, or group
316# documentation), provided this scope is documented. If set to NO (the default),
317# structs, classes, and unions are shown on a separate page (for HTML and Man
318# pages) or section (for LaTeX and RTF).
319
320INLINE_SIMPLE_STRUCTS  = NO
321
322# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
323# is documented as struct, union, or enum with the name of the typedef. So
324# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
325# with name TypeT. When disabled the typedef will appear as a member of a file,
326# namespace, or class. And the struct will be named TypeS. This can typically
327# be useful for C code in case the coding convention dictates that all compound
328# types are typedef'ed and only the typedef is referenced, never the tag name.
329
330TYPEDEF_HIDES_STRUCT   = NO
331
332# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
333# determine which symbols to keep in memory and which to flush to disk.
334# When the cache is full, less often used symbols will be written to disk.
335# For small to medium size projects (<1000 input files) the default value is
336# probably good enough. For larger projects a too small cache size can cause
337# doxygen to be busy swapping symbols to and from disk most of the time
338# causing a significant performance penalty.
339# If the system has enough physical memory increasing the cache will improve the
340# performance by keeping more symbols in memory. Note that the value works on
341# a logarithmic scale so increasing the size by one will roughly double the
342# memory usage. The cache size is given by this formula:
343# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
344# corresponding to a cache size of 2^16 = 65536 symbols.
345
346SYMBOL_CACHE_SIZE      = 0
347
348# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be
349# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given
350# their name and scope. Since this can be an expensive process and often the
351# same symbol appear multiple times in the code, doxygen keeps a cache of
352# pre-resolved symbols. If the cache is too small doxygen will become slower.
353# If the cache is too large, memory is wasted. The cache size is given by this
354# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0,
355# corresponding to a cache size of 2^16 = 65536 symbols.
356
357LOOKUP_CACHE_SIZE      = 0
358
359#---------------------------------------------------------------------------
360# Build related configuration options
361#---------------------------------------------------------------------------
362
363# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
364# documentation are documented, even if no documentation was available.
365# Private class members and static file members will be hidden unless
366# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
367
368EXTRACT_ALL            = YES
369
370# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
371# will be included in the documentation.
372
373EXTRACT_PRIVATE        = NO
374
375# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
376# scope will be included in the documentation.
377
378EXTRACT_PACKAGE        = NO
379
380# If the EXTRACT_STATIC tag is set to YES all static members of a file
381# will be included in the documentation.
382
383EXTRACT_STATIC         = NO
384
385# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
386# defined locally in source files will be included in the documentation.
387# If set to NO only classes defined in header files are included.
388
389EXTRACT_LOCAL_CLASSES  = YES
390
391# This flag is only useful for Objective-C code. When set to YES local
392# methods, which are defined in the implementation section but not in
393# the interface are included in the documentation.
394# If set to NO (the default) only methods in the interface are included.
395
396EXTRACT_LOCAL_METHODS  = NO
397
398# If this flag is set to YES, the members of anonymous namespaces will be
399# extracted and appear in the documentation as a namespace called
400# 'anonymous_namespace{file}', where file will be replaced with the base
401# name of the file that contains the anonymous namespace. By default
402# anonymous namespaces are hidden.
403
404EXTRACT_ANON_NSPACES   = NO
405
406# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
407# undocumented members of documented classes, files or namespaces.
408# If set to NO (the default) these members will be included in the
409# various overviews, but no documentation section is generated.
410# This option has no effect if EXTRACT_ALL is enabled.
411
412HIDE_UNDOC_MEMBERS     = NO
413
414# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
415# undocumented classes that are normally visible in the class hierarchy.
416# If set to NO (the default) these classes will be included in the various
417# overviews. This option has no effect if EXTRACT_ALL is enabled.
418
419HIDE_UNDOC_CLASSES     = NO
420
421# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
422# friend (class|struct|union) declarations.
423# If set to NO (the default) these declarations will be included in the
424# documentation.
425
426HIDE_FRIEND_COMPOUNDS  = NO
427
428# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
429# documentation blocks found inside the body of a function.
430# If set to NO (the default) these blocks will be appended to the
431# function's detailed documentation block.
432
433HIDE_IN_BODY_DOCS      = NO
434
435# The INTERNAL_DOCS tag determines if documentation
436# that is typed after a \internal command is included. If the tag is set
437# to NO (the default) then the documentation will be excluded.
438# Set it to YES to include the internal documentation.
439
440INTERNAL_DOCS          = NO
441
442# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
443# file names in lower-case letters. If set to YES upper-case letters are also
444# allowed. This is useful if you have classes or files whose names only differ
445# in case and if your file system supports case sensitive file names. Windows
446# and Mac users are advised to set this option to NO.
447
448CASE_SENSE_NAMES       = NO
449
450# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
451# will show members with their full class and namespace scopes in the
452# documentation. If set to YES the scope will be hidden.
453
454HIDE_SCOPE_NAMES       = NO
455
456# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
457# will put a list of the files that are included by a file in the documentation
458# of that file.
459
460SHOW_INCLUDE_FILES     = YES
461
462# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
463# will list include files with double quotes in the documentation
464# rather than with sharp brackets.
465
466FORCE_LOCAL_INCLUDES   = NO
467
468# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
469# is inserted in the documentation for inline members.
470
471INLINE_INFO            = YES
472
473# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
474# will sort the (detailed) documentation of file and class members
475# alphabetically by member name. If set to NO the members will appear in
476# declaration order.
477
478SORT_MEMBER_DOCS       = YES
479
480# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
481# brief documentation of file, namespace and class members alphabetically
482# by member name. If set to NO (the default) the members will appear in
483# declaration order.
484
485SORT_BRIEF_DOCS        = NO
486
487# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
488# will sort the (brief and detailed) documentation of class members so that
489# constructors and destructors are listed first. If set to NO (the default)
490# the constructors will appear in the respective orders defined by
491# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
492# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
493# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
494
495SORT_MEMBERS_CTORS_1ST = NO
496
497# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
498# hierarchy of group names into alphabetical order. If set to NO (the default)
499# the group names will appear in their defined order.
500
501SORT_GROUP_NAMES       = NO
502
503# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
504# sorted by fully-qualified names, including namespaces. If set to
505# NO (the default), the class list will be sorted only by class name,
506# not including the namespace part.
507# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
508# Note: This option applies only to the class list, not to the
509# alphabetical list.
510
511SORT_BY_SCOPE_NAME     = NO
512
513# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to
514# do proper type resolution of all parameters of a function it will reject a
515# match between the prototype and the implementation of a member function even
516# if there is only one candidate or it is obvious which candidate to choose
517# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
518# will still accept a match between prototype and implementation in such cases.
519
520STRICT_PROTO_MATCHING  = NO
521
522# The GENERATE_TODOLIST tag can be used to enable (YES) or
523# disable (NO) the todo list. This list is created by putting \todo
524# commands in the documentation.
525
526GENERATE_TODOLIST      = YES
527
528# The GENERATE_TESTLIST tag can be used to enable (YES) or
529# disable (NO) the test list. This list is created by putting \test
530# commands in the documentation.
531
532GENERATE_TESTLIST      = YES
533
534# The GENERATE_BUGLIST tag can be used to enable (YES) or
535# disable (NO) the bug list. This list is created by putting \bug
536# commands in the documentation.
537
538GENERATE_BUGLIST       = YES
539
540# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
541# disable (NO) the deprecated list. This list is created by putting
542# \deprecated commands in the documentation.
543
544GENERATE_DEPRECATEDLIST= YES
545
546# The ENABLED_SECTIONS tag can be used to enable conditional
547# documentation sections, marked by \if section-label ... \endif
548# and \cond section-label ... \endcond blocks.
549
550ENABLED_SECTIONS       =
551
552# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
553# the initial value of a variable or macro consists of for it to appear in
554# the documentation. If the initializer consists of more lines than specified
555# here it will be hidden. Use a value of 0 to hide initializers completely.
556# The appearance of the initializer of individual variables and macros in the
557# documentation can be controlled using \showinitializer or \hideinitializer
558# command in the documentation regardless of this setting.
559
560MAX_INITIALIZER_LINES  = 30
561
562# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
563# at the bottom of the documentation of classes and structs. If set to YES the
564# list will mention the files that were used to generate the documentation.
565
566SHOW_USED_FILES        = YES
567
568# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
569# This will remove the Files entry from the Quick Index and from the
570# Folder Tree View (if specified). The default is YES.
571
572SHOW_FILES             = YES
573
574# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
575# Namespaces page.
576# This will remove the Namespaces entry from the Quick Index
577# and from the Folder Tree View (if specified). The default is YES.
578
579SHOW_NAMESPACES        = YES
580
581# The FILE_VERSION_FILTER tag can be used to specify a program or script that
582# doxygen should invoke to get the current version for each file (typically from
583# the version control system). Doxygen will invoke the program by executing (via
584# popen()) the command <command> <input-file>, where <command> is the value of
585# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
586# provided by doxygen. Whatever the program writes to standard output
587# is used as the file version. See the manual for examples.
588
589FILE_VERSION_FILTER    =
590
591# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
592# by doxygen. The layout file controls the global structure of the generated
593# output files in an output format independent way. To create the layout file
594# that represents doxygen's defaults, run doxygen with the -l option.
595# You can optionally specify a file name after the option, if omitted
596# DoxygenLayout.xml will be used as the name of the layout file.
597
598LAYOUT_FILE            =
599
600# The CITE_BIB_FILES tag can be used to specify one or more bib files
601# containing the references data. This must be a list of .bib files. The
602# .bib extension is automatically appended if omitted. Using this command
603# requires the bibtex tool to be installed. See also
604# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style
605# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this
606# feature you need bibtex and perl available in the search path. Do not use
607# file names with spaces, bibtex cannot handle them.
608
609CITE_BIB_FILES         =
610
611#---------------------------------------------------------------------------
612# configuration options related to warning and progress messages
613#---------------------------------------------------------------------------
614
615# The QUIET tag can be used to turn on/off the messages that are generated
616# by doxygen. Possible values are YES and NO. If left blank NO is used.
617
618QUIET                  = NO
619
620# The WARNINGS tag can be used to turn on/off the warning messages that are
621# generated by doxygen. Possible values are YES and NO. If left blank
622# NO is used.
623
624WARNINGS               = YES
625
626# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
627# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
628# automatically be disabled.
629
630WARN_IF_UNDOCUMENTED   = YES
631
632# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
633# potential errors in the documentation, such as not documenting some
634# parameters in a documented function, or documenting parameters that
635# don't exist or using markup commands wrongly.
636
637WARN_IF_DOC_ERROR      = YES
638
639# The WARN_NO_PARAMDOC option can be enabled to get warnings for
640# functions that are documented, but have no documentation for their parameters
641# or return value. If set to NO (the default) doxygen will only warn about
642# wrong or incomplete parameter documentation, but not about the absence of
643# documentation.
644
645WARN_NO_PARAMDOC       = NO
646
647# The WARN_FORMAT tag determines the format of the warning messages that
648# doxygen can produce. The string should contain the $file, $line, and $text
649# tags, which will be replaced by the file and line number from which the
650# warning originated and the warning text. Optionally the format may contain
651# $version, which will be replaced by the version of the file (if it could
652# be obtained via FILE_VERSION_FILTER)
653
654WARN_FORMAT            = "$file:$line: $text"
655
656# The WARN_LOGFILE tag can be used to specify a file to which warning
657# and error messages should be written. If left blank the output is written
658# to stderr.
659
660WARN_LOGFILE           =
661
662#---------------------------------------------------------------------------
663# configuration options related to the input files
664#---------------------------------------------------------------------------
665
666# The INPUT tag can be used to specify the files and/or directories that contain
667# documented source files. You may enter file names like "myfile.cpp" or
668# directories like "/usr/src/myproject". Separate the files or directories
669# with spaces.
670
671INPUT                  = .
672
673# This tag can be used to specify the character encoding of the source files
674# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
675# also the default input encoding. Doxygen uses libiconv (or the iconv built
676# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
677# the list of possible encodings.
678
679INPUT_ENCODING         = UTF-8
680
681# If the value of the INPUT tag contains directories, you can use the
682# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
683# and *.h) to filter out the source-files in the directories. If left
684# blank the following patterns are tested:
685# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh
686# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
687# *.f90 *.f *.for *.vhd *.vhdl
688
689FILE_PATTERNS          =
690
691# The RECURSIVE tag can be used to turn specify whether or not subdirectories
692# should be searched for input files as well. Possible values are YES and NO.
693# If left blank NO is used.
694
695RECURSIVE              = YES
696
697# The EXCLUDE tag can be used to specify files and/or directories that should be
698# excluded from the INPUT source files. This way you can easily exclude a
699# subdirectory from a directory tree whose root is specified with the INPUT tag.
700# Note that relative paths are relative to the directory from which doxygen is
701# run.
702
703EXCLUDE                =
704
705# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
706# directories that are symbolic links (a Unix file system feature) are excluded
707# from the input.
708
709EXCLUDE_SYMLINKS       = NO
710
711# If the value of the INPUT tag contains directories, you can use the
712# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
713# certain files from those directories. Note that the wildcards are matched
714# against the file with absolute path, so to exclude all test directories
715# for example use the pattern */test/*
716
717EXCLUDE_PATTERNS       =
718
719# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
720# (namespaces, classes, functions, etc.) that should be excluded from the
721# output. The symbol name can be a fully qualified name, a word, or if the
722# wildcard * is used, a substring. Examples: ANamespace, AClass,
723# AClass::ANamespace, ANamespace::*Test
724
725EXCLUDE_SYMBOLS        =
726
727# The EXAMPLE_PATH tag can be used to specify one or more files or
728# directories that contain example code fragments that are included (see
729# the \include command).
730
731EXAMPLE_PATH           =
732
733# If the value of the EXAMPLE_PATH tag contains directories, you can use the
734# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
735# and *.h) to filter out the source-files in the directories. If left
736# blank all files are included.
737
738EXAMPLE_PATTERNS       =
739
740# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
741# searched for input files to be used with the \include or \dontinclude
742# commands irrespective of the value of the RECURSIVE tag.
743# Possible values are YES and NO. If left blank NO is used.
744
745EXAMPLE_RECURSIVE      = NO
746
747# The IMAGE_PATH tag can be used to specify one or more files or
748# directories that contain image that are included in the documentation (see
749# the \image command).
750
751IMAGE_PATH             =
752
753# The INPUT_FILTER tag can be used to specify a program that doxygen should
754# invoke to filter for each input file. Doxygen will invoke the filter program
755# by executing (via popen()) the command <filter> <input-file>, where <filter>
756# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
757# input file. Doxygen will then use the output that the filter program writes
758# to standard output.
759# If FILTER_PATTERNS is specified, this tag will be
760# ignored.
761
762INPUT_FILTER           =
763
764# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
765# basis.
766# Doxygen will compare the file name with each pattern and apply the
767# filter if there is a match.
768# The filters are a list of the form:
769# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
770# info on how filters are used. If FILTER_PATTERNS is empty or if
771# non of the patterns match the file name, INPUT_FILTER is applied.
772
773FILTER_PATTERNS        =
774
775# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
776# INPUT_FILTER) will be used to filter the input files when producing source
777# files to browse (i.e. when SOURCE_BROWSER is set to YES).
778
779FILTER_SOURCE_FILES    = NO
780
781# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
782# pattern. A pattern will override the setting for FILTER_PATTERN (if any)
783# and it is also possible to disable source filtering for a specific pattern
784# using *.ext= (so without naming a filter). This option only has effect when
785# FILTER_SOURCE_FILES is enabled.
786
787FILTER_SOURCE_PATTERNS =
788
789# If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that
790# is part of the input, its contents will be placed on the main page (index.html).
791# This can be useful if you have a project on for instance GitHub and want reuse
792# the introduction page also for the doxygen output.
793
794USE_MDFILE_AS_MAINPAGE =
795
796#---------------------------------------------------------------------------
797# configuration options related to source browsing
798#---------------------------------------------------------------------------
799
800# If the SOURCE_BROWSER tag is set to YES then a list of source files will
801# be generated. Documented entities will be cross-referenced with these sources.
802# Note: To get rid of all source code in the generated output, make sure also
803# VERBATIM_HEADERS is set to NO.
804
805SOURCE_BROWSER         = YES
806
807# Setting the INLINE_SOURCES tag to YES will include the body
808# of functions and classes directly in the documentation.
809
810INLINE_SOURCES         = YES
811
812# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
813# doxygen to hide any special comment blocks from generated source code
814# fragments. Normal C, C++ and Fortran comments will always remain visible.
815
816STRIP_CODE_COMMENTS    = YES
817
818# If the REFERENCED_BY_RELATION tag is set to YES
819# then for each documented function all documented
820# functions referencing it will be listed.
821
822REFERENCED_BY_RELATION = NO
823
824# If the REFERENCES_RELATION tag is set to YES
825# then for each documented function all documented entities
826# called/used by that function will be listed.
827
828REFERENCES_RELATION    = NO
829
830# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
831# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
832# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
833# link to the source code.
834# Otherwise they will link to the documentation.
835
836REFERENCES_LINK_SOURCE = YES
837
838# If the USE_HTAGS tag is set to YES then the references to source code
839# will point to the HTML generated by the htags(1) tool instead of doxygen
840# built-in source browser. The htags tool is part of GNU's global source
841# tagging system (see http://www.gnu.org/software/global/global.html). You
842# will need version 4.8.6 or higher.
843
844USE_HTAGS              = NO
845
846# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
847# will generate a verbatim copy of the header file for each class for
848# which an include is specified. Set to NO to disable this.
849
850VERBATIM_HEADERS       = YES
851
852#---------------------------------------------------------------------------
853# configuration options related to the alphabetical class index
854#---------------------------------------------------------------------------
855
856# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
857# of all compounds will be generated. Enable this if the project
858# contains a lot of classes, structs, unions or interfaces.
859
860ALPHABETICAL_INDEX     = YES
861
862# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
863# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
864# in which this list will be split (can be a number in the range [1..20])
865
866COLS_IN_ALPHA_INDEX    = 5
867
868# In case all classes in a project start with a common prefix, all
869# classes will be put under the same header in the alphabetical index.
870# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
871# should be ignored while generating the index headers.
872
873IGNORE_PREFIX          =
874
875#---------------------------------------------------------------------------
876# configuration options related to the HTML output
877#---------------------------------------------------------------------------
878
879# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
880# generate HTML output.
881
882GENERATE_HTML          = YES
883
884# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
885# If a relative path is entered the value of OUTPUT_DIRECTORY will be
886# put in front of it. If left blank `html' will be used as the default path.
887
888HTML_OUTPUT            = html
889
890# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
891# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
892# doxygen will generate files with .html extension.
893
894HTML_FILE_EXTENSION    = .html
895
896# The HTML_HEADER tag can be used to specify a personal HTML header for
897# each generated HTML page. If it is left blank doxygen will generate a
898# standard header. Note that when using a custom header you are responsible
899#  for the proper inclusion of any scripts and style sheets that doxygen
900# needs, which is dependent on the configuration options used.
901# It is advised to generate a default header using "doxygen -w html
902# header.html footer.html stylesheet.css YourConfigFile" and then modify
903# that header. Note that the header is subject to change so you typically
904# have to redo this when upgrading to a newer version of doxygen or when
905# changing the value of configuration settings such as GENERATE_TREEVIEW!
906
907HTML_HEADER            =
908
909# The HTML_FOOTER tag can be used to specify a personal HTML footer for
910# each generated HTML page. If it is left blank doxygen will generate a
911# standard footer.
912
913HTML_FOOTER            =
914
915# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
916# style sheet that is used by each HTML page. It can be used to
917# fine-tune the look of the HTML output. If left blank doxygen will
918# generate a default style sheet. Note that it is recommended to use
919# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this
920# tag will in the future become obsolete.
921
922HTML_STYLESHEET        =
923
924# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional
925# user-defined cascading style sheet that is included after the standard
926# style sheets created by doxygen. Using this option one can overrule
927# certain style aspects. This is preferred over using HTML_STYLESHEET
928# since it does not replace the standard style sheet and is therefor more
929# robust against future updates. Doxygen will copy the style sheet file to
930# the output directory.
931
932HTML_EXTRA_STYLESHEET  =
933
934# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
935# other source files which should be copied to the HTML output directory. Note
936# that these files will be copied to the base HTML output directory. Use the
937# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
938# files. In the HTML_STYLESHEET file, use the file name only. Also note that
939# the files will be copied as-is; there are no commands or markers available.
940
941HTML_EXTRA_FILES       =
942
943# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
944# Doxygen will adjust the colors in the style sheet and background images
945# according to this color. Hue is specified as an angle on a colorwheel,
946# see http://en.wikipedia.org/wiki/Hue for more information.
947# For instance the value 0 represents red, 60 is yellow, 120 is green,
948# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
949# The allowed range is 0 to 359.
950
951HTML_COLORSTYLE_HUE    = 220
952
953# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
954# the colors in the HTML output. For a value of 0 the output will use
955# grayscales only. A value of 255 will produce the most vivid colors.
956
957HTML_COLORSTYLE_SAT    = 100
958
959# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
960# the luminance component of the colors in the HTML output. Values below
961# 100 gradually make the output lighter, whereas values above 100 make
962# the output darker. The value divided by 100 is the actual gamma applied,
963# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
964# and 100 does not change the gamma.
965
966HTML_COLORSTYLE_GAMMA  = 80
967
968# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
969# page will contain the date and time when the page was generated. Setting
970# this to NO can help when comparing the output of multiple runs.
971
972HTML_TIMESTAMP         = YES
973
974# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
975# documentation will contain sections that can be hidden and shown after the
976# page has loaded.
977
978HTML_DYNAMIC_SECTIONS  = NO
979
980# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
981# entries shown in the various tree structured indices initially; the user
982# can expand and collapse entries dynamically later on. Doxygen will expand
983# the tree to such a level that at most the specified number of entries are
984# visible (unless a fully collapsed tree already exceeds this amount).
985# So setting the number of entries 1 will produce a full collapsed tree by
986# default. 0 is a special value representing an infinite number of entries
987# and will result in a full expanded tree by default.
988
989HTML_INDEX_NUM_ENTRIES = 100
990
991# If the GENERATE_DOCSET tag is set to YES, additional index files
992# will be generated that can be used as input for Apple's Xcode 3
993# integrated development environment, introduced with OSX 10.5 (Leopard).
994# To create a documentation set, doxygen will generate a Makefile in the
995# HTML output directory. Running make will produce the docset in that
996# directory and running "make install" will install the docset in
997# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
998# it at startup.
999# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
1000# for more information.
1001
1002GENERATE_DOCSET        = NO
1003
1004# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
1005# feed. A documentation feed provides an umbrella under which multiple
1006# documentation sets from a single provider (such as a company or product suite)
1007# can be grouped.
1008
1009DOCSET_FEEDNAME        = "Doxygen generated docs"
1010
1011# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
1012# should uniquely identify the documentation set bundle. This should be a
1013# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
1014# will append .docset to the name.
1015
1016DOCSET_BUNDLE_ID       = org.doxygen.Project
1017
1018# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely
1019# identify the documentation publisher. This should be a reverse domain-name
1020# style string, e.g. com.mycompany.MyDocSet.documentation.
1021
1022DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
1023
1024# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
1025
1026DOCSET_PUBLISHER_NAME  = Publisher
1027
1028# If the GENERATE_HTMLHELP tag is set to YES, additional index files
1029# will be generated that can be used as input for tools like the
1030# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
1031# of the generated HTML documentation.
1032
1033GENERATE_HTMLHELP      = NO
1034
1035# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
1036# be used to specify the file name of the resulting .chm file. You
1037# can add a path in front of the file if the result should not be
1038# written to the html output directory.
1039
1040CHM_FILE               =
1041
1042# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
1043# be used to specify the location (absolute path including file name) of
1044# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
1045# the HTML help compiler on the generated index.hhp.
1046
1047HHC_LOCATION           =
1048
1049# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
1050# controls if a separate .chi index file is generated (YES) or that
1051# it should be included in the master .chm file (NO).
1052
1053GENERATE_CHI           = NO
1054
1055# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
1056# is used to encode HtmlHelp index (hhk), content (hhc) and project file
1057# content.
1058
1059CHM_INDEX_ENCODING     =
1060
1061# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
1062# controls whether a binary table of contents is generated (YES) or a
1063# normal table of contents (NO) in the .chm file.
1064
1065BINARY_TOC             = NO
1066
1067# The TOC_EXPAND flag can be set to YES to add extra items for group members
1068# to the contents of the HTML help documentation and to the tree view.
1069
1070TOC_EXPAND             = NO
1071
1072# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
1073# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
1074# that can be used as input for Qt's qhelpgenerator to generate a
1075# Qt Compressed Help (.qch) of the generated HTML documentation.
1076
1077GENERATE_QHP           = NO
1078
1079# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
1080# be used to specify the file name of the resulting .qch file.
1081# The path specified is relative to the HTML output folder.
1082
1083QCH_FILE               =
1084
1085# The QHP_NAMESPACE tag specifies the namespace to use when generating
1086# Qt Help Project output. For more information please see
1087# http://doc.trolltech.com/qthelpproject.html#namespace
1088
1089QHP_NAMESPACE          = org.doxygen.Project
1090
1091# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
1092# Qt Help Project output. For more information please see
1093# http://doc.trolltech.com/qthelpproject.html#virtual-folders
1094
1095QHP_VIRTUAL_FOLDER     = doc
1096
1097# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
1098# add. For more information please see
1099# http://doc.trolltech.com/qthelpproject.html#custom-filters
1100
1101QHP_CUST_FILTER_NAME   =
1102
1103# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
1104# custom filter to add. For more information please see
1105# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
1106# Qt Help Project / Custom Filters</a>.
1107
1108QHP_CUST_FILTER_ATTRS  =
1109
1110# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
1111# project's
1112# filter section matches.
1113# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
1114# Qt Help Project / Filter Attributes</a>.
1115
1116QHP_SECT_FILTER_ATTRS  =
1117
1118# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
1119# be used to specify the location of Qt's qhelpgenerator.
1120# If non-empty doxygen will try to run qhelpgenerator on the generated
1121# .qhp file.
1122
1123QHG_LOCATION           =
1124
1125# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
1126#  will be generated, which together with the HTML files, form an Eclipse help
1127# plugin. To install this plugin and make it available under the help contents
1128# menu in Eclipse, the contents of the directory containing the HTML and XML
1129# files needs to be copied into the plugins directory of eclipse. The name of
1130# the directory within the plugins directory should be the same as
1131# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
1132# the help appears.
1133
1134GENERATE_ECLIPSEHELP   = NO
1135
1136# A unique identifier for the eclipse help plugin. When installing the plugin
1137# the directory name containing the HTML and XML files should also have
1138# this name.
1139
1140ECLIPSE_DOC_ID         = org.doxygen.Project
1141
1142# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs)
1143# at top of each HTML page. The value NO (the default) enables the index and
1144# the value YES disables it. Since the tabs have the same information as the
1145# navigation tree you can set this option to NO if you already set
1146# GENERATE_TREEVIEW to YES.
1147
1148DISABLE_INDEX          = NO
1149
1150# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
1151# structure should be generated to display hierarchical information.
1152# If the tag value is set to YES, a side panel will be generated
1153# containing a tree-like index structure (just like the one that
1154# is generated for HTML Help). For this to work a browser that supports
1155# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
1156# Windows users are probably better off using the HTML help feature.
1157# Since the tree basically has the same information as the tab index you
1158# could consider to set DISABLE_INDEX to NO when enabling this option.
1159
1160GENERATE_TREEVIEW      = NO
1161
1162# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
1163# (range [0,1..20]) that doxygen will group on one line in the generated HTML
1164# documentation. Note that a value of 0 will completely suppress the enum
1165# values from appearing in the overview section.
1166
1167ENUM_VALUES_PER_LINE   = 4
1168
1169# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
1170# used to set the initial width (in pixels) of the frame in which the tree
1171# is shown.
1172
1173TREEVIEW_WIDTH         = 250
1174
1175# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
1176# links to external symbols imported via tag files in a separate window.
1177
1178EXT_LINKS_IN_WINDOW    = NO
1179
1180# Use this tag to change the font size of Latex formulas included
1181# as images in the HTML documentation. The default is 10. Note that
1182# when you change the font size after a successful doxygen run you need
1183# to manually remove any form_*.png images from the HTML output directory
1184# to force them to be regenerated.
1185
1186FORMULA_FONTSIZE       = 10
1187
1188# Use the FORMULA_TRANPARENT tag to determine whether or not the images
1189# generated for formulas are transparent PNGs. Transparent PNGs are
1190# not supported properly for IE 6.0, but are supported on all modern browsers.
1191# Note that when changing this option you need to delete any form_*.png files
1192# in the HTML output before the changes have effect.
1193
1194FORMULA_TRANSPARENT    = YES
1195
1196# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
1197# (see http://www.mathjax.org) which uses client side Javascript for the
1198# rendering instead of using prerendered bitmaps. Use this if you do not
1199# have LaTeX installed or if you want to formulas look prettier in the HTML
1200# output. When enabled you may also need to install MathJax separately and
1201# configure the path to it using the MATHJAX_RELPATH option.
1202
1203USE_MATHJAX            = NO
1204
1205# When MathJax is enabled you can set the default output format to be used for
1206# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and
1207# SVG. The default value is HTML-CSS, which is slower, but has the best
1208# compatibility.
1209
1210MATHJAX_FORMAT         = HTML-CSS
1211
1212# When MathJax is enabled you need to specify the location relative to the
1213# HTML output directory using the MATHJAX_RELPATH option. The destination
1214# directory should contain the MathJax.js script. For instance, if the mathjax
1215# directory is located at the same level as the HTML output directory, then
1216# MATHJAX_RELPATH should be ../mathjax. The default value points to
1217# the MathJax Content Delivery Network so you can quickly see the result without
1218# installing MathJax.
1219# However, it is strongly recommended to install a local
1220# copy of MathJax from http://www.mathjax.org before deployment.
1221
1222MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
1223
1224# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension
1225# names that should be enabled during MathJax rendering.
1226
1227MATHJAX_EXTENSIONS     =
1228
1229# When the SEARCHENGINE tag is enabled doxygen will generate a search box
1230# for the HTML output. The underlying search engine uses javascript
1231# and DHTML and should work on any modern browser. Note that when using
1232# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
1233# (GENERATE_DOCSET) there is already a search function so this one should
1234# typically be disabled. For large projects the javascript based search engine
1235# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
1236
1237SEARCHENGINE           = YES
1238
1239# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
1240# implemented using a web server instead of a web client using Javascript.
1241# There are two flavours of web server based search depending on the
1242# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for
1243# searching and an index file used by the script. When EXTERNAL_SEARCH is
1244# enabled the indexing and searching needs to be provided by external tools.
1245# See the manual for details.
1246
1247SERVER_BASED_SEARCH    = NO
1248
1249# When EXTERNAL_SEARCH is enabled doxygen will no longer generate the PHP
1250# script for searching. Instead the search results are written to an XML file
1251# which needs to be processed by an external indexer. Doxygen will invoke an
1252# external search engine pointed to by the SEARCHENGINE_URL option to obtain
1253# the search results. Doxygen ships with an example indexer (doxyindexer) and
1254# search engine (doxysearch.cgi) which are based on the open source search engine
1255# library Xapian. See the manual for configuration details.
1256
1257EXTERNAL_SEARCH        = NO
1258
1259# The SEARCHENGINE_URL should point to a search engine hosted by a web server
1260# which will returned the search results when EXTERNAL_SEARCH is enabled.
1261# Doxygen ships with an example search engine (doxysearch) which is based on
1262# the open source search engine library Xapian. See the manual for configuration
1263# details.
1264
1265SEARCHENGINE_URL       =
1266
1267# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
1268# search data is written to a file for indexing by an external tool. With the
1269# SEARCHDATA_FILE tag the name of this file can be specified.
1270
1271SEARCHDATA_FILE        = searchdata.xml
1272
1273# When SERVER_BASED_SEARCH AND EXTERNAL_SEARCH are both enabled the
1274# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
1275# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
1276# projects and redirect the results back to the right project.
1277
1278EXTERNAL_SEARCH_ID     =
1279
1280# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
1281# projects other than the one defined by this configuration file, but that are
1282# all added to the same external search index. Each project needs to have a
1283# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id
1284# of to a relative location where the documentation can be found.
1285# The format is: EXTRA_SEARCH_MAPPINGS = id1=loc1 id2=loc2 ...
1286
1287EXTRA_SEARCH_MAPPINGS  =
1288
1289#---------------------------------------------------------------------------
1290# configuration options related to the LaTeX output
1291#---------------------------------------------------------------------------
1292
1293# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
1294# generate Latex output.
1295
1296GENERATE_LATEX         = YES
1297
1298# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
1299# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1300# put in front of it. If left blank `latex' will be used as the default path.
1301
1302LATEX_OUTPUT           = latex
1303
1304# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
1305# invoked. If left blank `latex' will be used as the default command name.
1306# Note that when enabling USE_PDFLATEX this option is only used for
1307# generating bitmaps for formulas in the HTML output, but not in the
1308# Makefile that is written to the output directory.
1309
1310LATEX_CMD_NAME         = latex
1311
1312# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
1313# generate index for LaTeX. If left blank `makeindex' will be used as the
1314# default command name.
1315
1316MAKEINDEX_CMD_NAME     = makeindex
1317
1318# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
1319# LaTeX documents. This may be useful for small projects and may help to
1320# save some trees in general.
1321
1322COMPACT_LATEX          = NO
1323
1324# The PAPER_TYPE tag can be used to set the paper type that is used
1325# by the printer. Possible values are: a4, letter, legal and
1326# executive. If left blank a4wide will be used.
1327
1328PAPER_TYPE             = a4
1329
1330# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
1331# packages that should be included in the LaTeX output.
1332
1333EXTRA_PACKAGES         =
1334
1335# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
1336# the generated latex document. The header should contain everything until
1337# the first chapter. If it is left blank doxygen will generate a
1338# standard header. Notice: only use this tag if you know what you are doing!
1339
1340LATEX_HEADER           =
1341
1342# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
1343# the generated latex document. The footer should contain everything after
1344# the last chapter. If it is left blank doxygen will generate a
1345# standard footer. Notice: only use this tag if you know what you are doing!
1346
1347LATEX_FOOTER           =
1348
1349# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
1350# is prepared for conversion to pdf (using ps2pdf). The pdf file will
1351# contain links (just like the HTML output) instead of page references
1352# This makes the output suitable for online browsing using a pdf viewer.
1353
1354PDF_HYPERLINKS         = YES
1355
1356# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
1357# plain latex in the generated Makefile. Set this option to YES to get a
1358# higher quality PDF documentation.
1359
1360USE_PDFLATEX           = YES
1361
1362# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
1363# command to the generated LaTeX files. This will instruct LaTeX to keep
1364# running if errors occur, instead of asking the user for help.
1365# This option is also used when generating formulas in HTML.
1366
1367LATEX_BATCHMODE        = NO
1368
1369# If LATEX_HIDE_INDICES is set to YES then doxygen will not
1370# include the index chapters (such as File Index, Compound Index, etc.)
1371# in the output.
1372
1373LATEX_HIDE_INDICES     = NO
1374
1375# If LATEX_SOURCE_CODE is set to YES then doxygen will include
1376# source code with syntax highlighting in the LaTeX output.
1377# Note that which sources are shown also depends on other settings
1378# such as SOURCE_BROWSER.
1379
1380LATEX_SOURCE_CODE      = NO
1381
1382# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
1383# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See
1384# http://en.wikipedia.org/wiki/BibTeX for more info.
1385
1386LATEX_BIB_STYLE        = plain
1387
1388#---------------------------------------------------------------------------
1389# configuration options related to the RTF output
1390#---------------------------------------------------------------------------
1391
1392# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
1393# The RTF output is optimized for Word 97 and may not look very pretty with
1394# other RTF readers or editors.
1395
1396GENERATE_RTF           = NO
1397
1398# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
1399# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1400# put in front of it. If left blank `rtf' will be used as the default path.
1401
1402RTF_OUTPUT             = rtf
1403
1404# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
1405# RTF documents. This may be useful for small projects and may help to
1406# save some trees in general.
1407
1408COMPACT_RTF            = NO
1409
1410# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
1411# will contain hyperlink fields. The RTF file will
1412# contain links (just like the HTML output) instead of page references.
1413# This makes the output suitable for online browsing using WORD or other
1414# programs which support those fields.
1415# Note: wordpad (write) and others do not support links.
1416
1417RTF_HYPERLINKS         = NO
1418
1419# Load style sheet definitions from file. Syntax is similar to doxygen's
1420# config file, i.e. a series of assignments. You only have to provide
1421# replacements, missing definitions are set to their default value.
1422
1423RTF_STYLESHEET_FILE    =
1424
1425# Set optional variables used in the generation of an rtf document.
1426# Syntax is similar to doxygen's config file.
1427
1428RTF_EXTENSIONS_FILE    =
1429
1430#---------------------------------------------------------------------------
1431# configuration options related to the man page output
1432#---------------------------------------------------------------------------
1433
1434# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
1435# generate man pages
1436
1437GENERATE_MAN           = NO
1438
1439# The MAN_OUTPUT tag is used to specify where the man pages will be put.
1440# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1441# put in front of it. If left blank `man' will be used as the default path.
1442
1443MAN_OUTPUT             = man
1444
1445# The MAN_EXTENSION tag determines the extension that is added to
1446# the generated man pages (default is the subroutine's section .3)
1447
1448MAN_EXTENSION          = .3
1449
1450# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
1451# then it will generate one additional man file for each entity
1452# documented in the real man page(s). These additional files
1453# only source the real man page, but without them the man command
1454# would be unable to find the correct page. The default is NO.
1455
1456MAN_LINKS              = NO
1457
1458#---------------------------------------------------------------------------
1459# configuration options related to the XML output
1460#---------------------------------------------------------------------------
1461
1462# If the GENERATE_XML tag is set to YES Doxygen will
1463# generate an XML file that captures the structure of
1464# the code including all documentation.
1465
1466GENERATE_XML           = NO
1467
1468# The XML_OUTPUT tag is used to specify where the XML pages will be put.
1469# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1470# put in front of it. If left blank `xml' will be used as the default path.
1471
1472XML_OUTPUT             = xml
1473
1474# The XML_SCHEMA tag can be used to specify an XML schema,
1475# which can be used by a validating XML parser to check the
1476# syntax of the XML files.
1477
1478XML_SCHEMA             =
1479
1480# The XML_DTD tag can be used to specify an XML DTD,
1481# which can be used by a validating XML parser to check the
1482# syntax of the XML files.
1483
1484XML_DTD                =
1485
1486# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
1487# dump the program listings (including syntax highlighting
1488# and cross-referencing information) to the XML output. Note that
1489# enabling this will significantly increase the size of the XML output.
1490
1491XML_PROGRAMLISTING     = YES
1492
1493#---------------------------------------------------------------------------
1494# configuration options for the AutoGen Definitions output
1495#---------------------------------------------------------------------------
1496
1497# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
1498# generate an AutoGen Definitions (see autogen.sf.net) file
1499# that captures the structure of the code including all
1500# documentation. Note that this feature is still experimental
1501# and incomplete at the moment.
1502
1503GENERATE_AUTOGEN_DEF   = NO
1504
1505#---------------------------------------------------------------------------
1506# configuration options related to the Perl module output
1507#---------------------------------------------------------------------------
1508
1509# If the GENERATE_PERLMOD tag is set to YES Doxygen will
1510# generate a Perl module file that captures the structure of
1511# the code including all documentation. Note that this
1512# feature is still experimental and incomplete at the
1513# moment.
1514
1515GENERATE_PERLMOD       = NO
1516
1517# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
1518# the necessary Makefile rules, Perl scripts and LaTeX code to be able
1519# to generate PDF and DVI output from the Perl module output.
1520
1521PERLMOD_LATEX          = NO
1522
1523# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
1524# nicely formatted so it can be parsed by a human reader.
1525# This is useful
1526# if you want to understand what is going on.
1527# On the other hand, if this
1528# tag is set to NO the size of the Perl module output will be much smaller
1529# and Perl will parse it just the same.
1530
1531PERLMOD_PRETTY         = YES
1532
1533# The names of the make variables in the generated doxyrules.make file
1534# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1535# This is useful so different doxyrules.make files included by the same
1536# Makefile don't overwrite each other's variables.
1537
1538PERLMOD_MAKEVAR_PREFIX =
1539
1540#---------------------------------------------------------------------------
1541# Configuration options related to the preprocessor
1542#---------------------------------------------------------------------------
1543
1544# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1545# evaluate all C-preprocessor directives found in the sources and include
1546# files.
1547
1548ENABLE_PREPROCESSING   = YES
1549
1550# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1551# names in the source code. If set to NO (the default) only conditional
1552# compilation will be performed. Macro expansion can be done in a controlled
1553# way by setting EXPAND_ONLY_PREDEF to YES.
1554
1555MACRO_EXPANSION        = NO
1556
1557# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1558# then the macro expansion is limited to the macros specified with the
1559# PREDEFINED and EXPAND_AS_DEFINED tags.
1560
1561EXPAND_ONLY_PREDEF     = NO
1562
1563# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1564# pointed to by INCLUDE_PATH will be searched when a #include is found.
1565
1566SEARCH_INCLUDES        = YES
1567
1568# The INCLUDE_PATH tag can be used to specify one or more directories that
1569# contain include files that are not input files but should be processed by
1570# the preprocessor.
1571
1572INCLUDE_PATH           =
1573
1574# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1575# patterns (like *.h and *.hpp) to filter out the header-files in the
1576# directories. If left blank, the patterns specified with FILE_PATTERNS will
1577# be used.
1578
1579INCLUDE_FILE_PATTERNS  =
1580
1581# The PREDEFINED tag can be used to specify one or more macro names that
1582# are defined before the preprocessor is started (similar to the -D option of
1583# gcc). The argument of the tag is a list of macros of the form: name
1584# or name=definition (no spaces). If the definition and the = are
1585# omitted =1 is assumed. To prevent a macro definition from being
1586# undefined via #undef or recursively expanded use the := operator
1587# instead of the = operator.
1588
1589PREDEFINED             =
1590
1591# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1592# this tag can be used to specify a list of macro names that should be expanded.
1593# The macro definition that is found in the sources will be used.
1594# Use the PREDEFINED tag if you want to use a different macro definition that
1595# overrules the definition found in the source code.
1596
1597EXPAND_AS_DEFINED      =
1598
1599# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1600# doxygen's preprocessor will remove all references to function-like macros
1601# that are alone on a line, have an all uppercase name, and do not end with a
1602# semicolon, because these will confuse the parser if not removed.
1603
1604SKIP_FUNCTION_MACROS   = YES
1605
1606#---------------------------------------------------------------------------
1607# Configuration::additions related to external references
1608#---------------------------------------------------------------------------
1609
1610# The TAGFILES option can be used to specify one or more tagfiles. For each
1611# tag file the location of the external documentation should be added. The
1612# format of a tag file without this location is as follows:
1613#
1614# TAGFILES = file1 file2 ...
1615# Adding location for the tag files is done as follows:
1616#
1617# TAGFILES = file1=loc1 "file2 = loc2" ...
1618# where "loc1" and "loc2" can be relative or absolute paths
1619# or URLs. Note that each tag file must have a unique name (where the name does
1620# NOT include the path). If a tag file is not located in the directory in which
1621# doxygen is run, you must also specify the path to the tagfile here.
1622
1623TAGFILES               =
1624
1625# When a file name is specified after GENERATE_TAGFILE, doxygen will create
1626# a tag file that is based on the input files it reads.
1627
1628GENERATE_TAGFILE       =
1629
1630# If the ALLEXTERNALS tag is set to YES all external classes will be listed
1631# in the class index. If set to NO only the inherited external classes
1632# will be listed.
1633
1634ALLEXTERNALS           = NO
1635
1636# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1637# in the modules index. If set to NO, only the current project's groups will
1638# be listed.
1639
1640EXTERNAL_GROUPS        = YES
1641
1642# The PERL_PATH should be the absolute path and name of the perl script
1643# interpreter (i.e. the result of `which perl').
1644
1645PERL_PATH              = /usr/bin/perl
1646
1647#---------------------------------------------------------------------------
1648# Configuration options related to the dot tool
1649#---------------------------------------------------------------------------
1650
1651# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1652# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1653# or super classes. Setting the tag to NO turns the diagrams off. Note that
1654# this option also works with HAVE_DOT disabled, but it is recommended to
1655# install and use dot, since it yields more powerful graphs.
1656
1657CLASS_DIAGRAMS         = YES
1658
1659# You can define message sequence charts within doxygen comments using the \msc
1660# command. Doxygen will then run the mscgen tool (see
1661# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
1662# documentation. The MSCGEN_PATH tag allows you to specify the directory where
1663# the mscgen tool resides. If left empty the tool is assumed to be found in the
1664# default search path.
1665
1666MSCGEN_PATH            =
1667
1668# If set to YES, the inheritance and collaboration graphs will hide
1669# inheritance and usage relations if the target is undocumented
1670# or is not a class.
1671
1672HIDE_UNDOC_RELATIONS   = YES
1673
1674# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1675# available from the path. This tool is part of Graphviz, a graph visualization
1676# toolkit from AT&T and Lucent Bell Labs. The other options in this section
1677# have no effect if this option is set to NO (the default)
1678
1679HAVE_DOT               = YES
1680
1681# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
1682# allowed to run in parallel. When set to 0 (the default) doxygen will
1683# base this on the number of processors available in the system. You can set it
1684# explicitly to a value larger than 0 to get control over the balance
1685# between CPU load and processing speed.
1686
1687DOT_NUM_THREADS        = 0
1688
1689# By default doxygen will use the Helvetica font for all dot files that
1690# doxygen generates. When you want a differently looking font you can specify
1691# the font name using DOT_FONTNAME. You need to make sure dot is able to find
1692# the font, which can be done by putting it in a standard location or by setting
1693# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
1694# directory containing the font.
1695
1696DOT_FONTNAME           = Helvetica
1697
1698# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
1699# The default size is 10pt.
1700
1701DOT_FONTSIZE           = 10
1702
1703# By default doxygen will tell dot to use the Helvetica font.
1704# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to
1705# set the path where dot can find it.
1706
1707DOT_FONTPATH           =
1708
1709# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1710# will generate a graph for each documented class showing the direct and
1711# indirect inheritance relations. Setting this tag to YES will force the
1712# CLASS_DIAGRAMS tag to NO.
1713
1714CLASS_GRAPH            = YES
1715
1716# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1717# will generate a graph for each documented class showing the direct and
1718# indirect implementation dependencies (inheritance, containment, and
1719# class references variables) of the class with other documented classes.
1720
1721COLLABORATION_GRAPH    = YES
1722
1723# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1724# will generate a graph for groups, showing the direct groups dependencies
1725
1726GROUP_GRAPHS           = YES
1727
1728# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1729# collaboration diagrams in a style similar to the OMG's Unified Modeling
1730# Language.
1731
1732UML_LOOK               = NO
1733
1734# If the UML_LOOK tag is enabled, the fields and methods are shown inside
1735# the class node. If there are many fields or methods and many nodes the
1736# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS
1737# threshold limits the number of items for each type to make the size more
1738# managable. Set this to 0 for no limit. Note that the threshold may be
1739# exceeded by 50% before the limit is enforced.
1740
1741UML_LIMIT_NUM_FIELDS   = 10
1742
1743# If set to YES, the inheritance and collaboration graphs will show the
1744# relations between templates and their instances.
1745
1746TEMPLATE_RELATIONS     = NO
1747
1748# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1749# tags are set to YES then doxygen will generate a graph for each documented
1750# file showing the direct and indirect include dependencies of the file with
1751# other documented files.
1752
1753INCLUDE_GRAPH          = YES
1754
1755# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1756# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1757# documented header file showing the documented files that directly or
1758# indirectly include this file.
1759
1760INCLUDED_BY_GRAPH      = YES
1761
1762# If the CALL_GRAPH and HAVE_DOT options are set to YES then
1763# doxygen will generate a call dependency graph for every global function
1764# or class method. Note that enabling this option will significantly increase
1765# the time of a run. So in most cases it will be better to enable call graphs
1766# for selected functions only using the \callgraph command.
1767
1768CALL_GRAPH             = NO
1769
1770# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
1771# doxygen will generate a caller dependency graph for every global function
1772# or class method. Note that enabling this option will significantly increase
1773# the time of a run. So in most cases it will be better to enable caller
1774# graphs for selected functions only using the \callergraph command.
1775
1776CALLER_GRAPH           = YES
1777
1778# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1779# will generate a graphical hierarchy of all classes instead of a textual one.
1780
1781GRAPHICAL_HIERARCHY    = YES
1782
1783# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
1784# then doxygen will show the dependencies a directory has on other directories
1785# in a graphical way. The dependency relations are determined by the #include
1786# relations between the files in the directories.
1787
1788DIRECTORY_GRAPH        = YES
1789
1790# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1791# generated by dot. Possible values are svg, png, jpg, or gif.
1792# If left blank png will be used. If you choose svg you need to set
1793# HTML_FILE_EXTENSION to xhtml in order to make the SVG files
1794# visible in IE 9+ (other browsers do not have this requirement).
1795
1796DOT_IMAGE_FORMAT       = png
1797
1798# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
1799# enable generation of interactive SVG images that allow zooming and panning.
1800# Note that this requires a modern browser other than Internet Explorer.
1801# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you
1802# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files
1803# visible. Older versions of IE do not have SVG support.
1804
1805INTERACTIVE_SVG        = NO
1806
1807# The tag DOT_PATH can be used to specify the path where the dot tool can be
1808# found. If left blank, it is assumed the dot tool can be found in the path.
1809
1810DOT_PATH               =
1811
1812# The DOTFILE_DIRS tag can be used to specify one or more directories that
1813# contain dot files that are included in the documentation (see the
1814# \dotfile command).
1815
1816DOTFILE_DIRS           =
1817
1818# The MSCFILE_DIRS tag can be used to specify one or more directories that
1819# contain msc files that are included in the documentation (see the
1820# \mscfile command).
1821
1822MSCFILE_DIRS           =
1823
1824# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1825# nodes that will be shown in the graph. If the number of nodes in a graph
1826# becomes larger than this value, doxygen will truncate the graph, which is
1827# visualized by representing a node as a red box. Note that doxygen if the
1828# number of direct children of the root node in a graph is already larger than
1829# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
1830# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1831
1832DOT_GRAPH_MAX_NODES    = 50
1833
1834# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1835# graphs generated by dot. A depth value of 3 means that only nodes reachable
1836# from the root by following a path via at most 3 edges will be shown. Nodes
1837# that lay further from the root node will be omitted. Note that setting this
1838# option to 1 or 2 may greatly reduce the computation time needed for large
1839# code bases. Also note that the size of a graph can be further restricted by
1840# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1841
1842MAX_DOT_GRAPH_DEPTH    = 0
1843
1844# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1845# background. This is disabled by default, because dot on Windows does not
1846# seem to support this out of the box. Warning: Depending on the platform used,
1847# enabling this option may lead to badly anti-aliased labels on the edges of
1848# a graph (i.e. they become hard to read).
1849
1850DOT_TRANSPARENT        = NO
1851
1852# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1853# files in one run (i.e. multiple -o and -T options on the command line). This
1854# makes dot run faster, but since only newer versions of dot (>1.8.10)
1855# support this, this feature is disabled by default.
1856
1857DOT_MULTI_TARGETS      = NO
1858
1859# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1860# generate a legend page explaining the meaning of the various boxes and
1861# arrows in the dot generated graphs.
1862
1863GENERATE_LEGEND        = YES
1864
1865# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1866# remove the intermediate dot files that are used to generate
1867# the various graphs.
1868
1869DOT_CLEANUP            = YES
Note: See TracBrowser for help on using the repository browser.