source: trunk/softs/tsar_boot/drivers/reset_bdv.c @ 983

Last change on this file since 983 was 968, checked in by cfuguet, 10 years ago

bugfix:tsar_boot: cache aligned structures should use the
CACHE_LINE_SIZE constant

  • Define a macro for the cache aligned attribute.
File size: 2.1 KB
Line 
1/**
2 * \file   reset_bdv.c
3 * \date   December 14, 2014
4 * \author Cesar Fuguet
5 */
6#include <reset_bdv.h>
7#include <reset_tty.h>
8#include <reset_inval.h>
9#include <io.h>
10#include <defs.h>
11
12#ifndef SEG_IOC_BASE
13#    error "SEG_IOC_BASE constant must be defined in the hard_config.h file"
14#endif
15
16static int* const ioc_address = (int* const)SEG_IOC_BASE;
17
18enum block_device_registers {
19    BLOCK_DEVICE_BUFFER,
20    BLOCK_DEVICE_LBA,
21    BLOCK_DEVICE_COUNT,
22    BLOCK_DEVICE_OP,
23    BLOCK_DEVICE_STATUS,
24    BLOCK_DEVICE_IRQ_ENABLE,
25    BLOCK_DEVICE_SIZE,
26    BLOCK_DEVICE_BLOCK_SIZE,
27};
28
29enum block_device_operations {
30    BLOCK_DEVICE_NOOP,
31    BLOCK_DEVICE_READ,
32    BLOCK_DEVICE_WRITE,
33};
34
35enum block_device_status {
36    BLOCK_DEVICE_IDLE,
37    BLOCK_DEVICE_BUSY,
38    BLOCK_DEVICE_READ_SUCCESS,
39    BLOCK_DEVICE_WRITE_SUCCESS,
40    BLOCK_DEVICE_READ_ERROR,
41    BLOCK_DEVICE_WRITE_ERROR,
42    BLOCK_DEVICE_ERROR,
43};
44
45////////////////////
46int reset_bdv_init()
47{
48    return 0;
49}
50
51////////////////////////////////////
52int reset_bdv_read( unsigned int lba, void* buffer, unsigned int count )
53{
54    // block_device configuration
55    iowrite32( &ioc_address[BLOCK_DEVICE_BUFFER], (unsigned int)buffer );
56    iowrite32( &ioc_address[BLOCK_DEVICE_COUNT], count );
57    iowrite32( &ioc_address[BLOCK_DEVICE_LBA], lba );
58    iowrite32( &ioc_address[BLOCK_DEVICE_IRQ_ENABLE], 0 );
59
60    //  trigger transfer
61    iowrite32( &ioc_address[BLOCK_DEVICE_OP],
62               (unsigned int)BLOCK_DEVICE_READ );
63
64#if (RESET_HARD_CC == 0) || USE_IOB
65    // inval buffer in L1 cache
66    reset_L1_inval( buffer , count * 512 );
67#endif
68
69#if USE_IOB
70    // inval buffer in L2 cache
71    reset_L2_inval( buffer , count * 512 );
72#endif
73
74    unsigned int status = 0;
75    while ( 1 )
76    {
77        status = ioread32(&ioc_address[BLOCK_DEVICE_STATUS]);
78        if ( status == BLOCK_DEVICE_READ_SUCCESS )
79        {
80            break;
81        }
82        if ( status == BLOCK_DEVICE_READ_ERROR )
83        {
84            reset_puts("ERROR during read on the BLK device\n");
85            return 1;
86        }
87    }
88
89    return 0;
90}
91
92/*
93 * vim: tabstop=4 : softtabstop=4 : shiftwidth=4 : expandtab
94 */
Note: See TracBrowser for help on using the repository browser.