Context Navigation

reset.S @ 884

Last change on this file since 884 was 833, checked in by alain, 10 years ago
Modifying the reset.S file to support procid on 12 bits.
File size: 7.3 KB

Line
1	/*
2	* \file : reset.S
3	* \date : 01/12/2012
4	* \author: Cesar FUGUET & Manuel BOUYER & Alain Greiner
5	*
6	* This is a generic reset code for a generic multi-clusters / multi-processors
7	* TSAR architecture (up to 256 clusters / up to 4 processors per cluster).
8	*
9	* There is one XICU, one TTY, one DMA, and one memory bank per cluster.
10	*
11	* This preloader uses a stack segment allocated in cluster 0 for processor 0.
12	* The stack allocation is not performed for other processors as they do not
13	* need it during the preloader execution. Therefore, this allocation should be
14	* done by the loaded Operating System.
15	*
16	* The replicated XICU is used to awake the sleeping processors:
17	* xicu_paddr_base = ICU_PADDR_BASE + (cluster_xy << 32)
18	*
19	* It is intended to be used with various operating systems or nano kernels,
20	* including NetBSD, Linux, ALMOS, and GIET_VM.
21	*
22	* - Each processor initializes its Status Register (SR) to disable interrupts.
23	* - Each processor initializes its Count Register.
24	* - Each processor initialises its private XICU WTI mask register.
25	* - Only processor 0 executes the reset_load_elf function to load into memory
26	* the system specific boot-loader stored on disk at RESET_LOADER_LBA
27	* - All other processors wait in a low power consumption mode that the
28	* processor 0 wakes them using an IPI (Inter Processor Interruption)
29	*/
30
31	#include <defs.h>
32	#include <mips32_registers.h>
33
34	/* These define should be consistent with values defined in map.xml file */
35
36	.section .reset,"ax",@progbits
37
38	.extern dtb_addr
39	.extern reset_putc
40	.extern reset_getc
41	.extern reset_ioc_read
42	.extern reset_elf_loader
43	.extern memcpy
44	.extern reset_puts
45	.extern reset_putx
46	.extern reset_putd
47	.extern reset_ioc_init
48	.extern versionstr
49
50	.globl reset /* Makes reset an external symbol */
51	.ent reset
52
53	.align 2
54	.set noreorder
55
56	reset:
57	b _reset /* 0xbfc0000 */
58	nop /* 0xbfc0004 */
59
60	/* Addresses of the functions provided by this reset code */
61
62	preloader_vector:
63	.word RESET_VERSION /* 0xbfc0008 */
64	.word dtb_addr /* 0xbfc000c */
65	.word reset_putc /* 0xbfc0010 */
66	.word reset_getc /* 0xbfc0014 */
67	.word reset_ioc_read /* 0xbfc0018 */
68	.word reset_elf_loader /* 0xbfc001C */
69	.word memcpy /* 0xbfc0020 */
70	.word reset_puts /* 0xbfc0024 */
71	.word reset_putx /* 0xbfc0028 */
72	.word reset_putd /* 0xbfc002C */
73
74	_reset:
75
76	/* All processors Disable interruptions, keep STATUSbev enabled */
77
78	li k0, (1 << 22)
79	mtc0 k0, CP0_STATUS
80
81	/*
82	* All processors compute gpid, lpid, cluster_xy
83	* gpid = ebase[11:0] = X_WIDTH : Y_WIDTH : P_WIDTH
84	* x y lpid
85	* X, Y and LPID fields are left-aligned
86	*/
87
88	mfc0 k0, CP0_EBASE
89	andi t0, k0, 0xFFF /* t0 <= gpid (<= 4096 procs) */
90	andi t1, t0, ((1<<P_WIDTH)-1) /* t1 <= lpid */
91	srl t2, t0, P_WIDTH /* t2 <= cluster_xy */
92
93	/* All processors initialise the count register in CP0 */
94
95	mtc0 zero, CP0_COUNT
96
97	/*
98	* All processors enable the WTI for XICU
99	* Each processor may have IRQ_PER_PROC irq outputs from the XICU
100	* In each cluster, the XICU base address depends on the cluster_xy
101	*/
102
103	la t3, SEG_XCU_BASE /* t3 <= ICU base address */
104	move t4, t1 /* t4 <= local_id */
105	li t5, IRQ_PER_PROCESSOR /* t5 <= IRQ_PER_PROCESSOR */
106	multu t4, t5
107	mflo t6 /* t6 <= IRQ_PER_PROC * local_id */
108	sll t4, t6, 2 /* t4 <= OUT_INDEX = t6 * 4 */
109
110	li t5, (0xC << 7) /* t5 <= FUNC = XICU_MSK_WTI */
111	or t4, t4, t5 /* t4 <= FUNC \| INDEX \| 00 */
112	or t5, t3, t4 /* t5 <= &XICU[MSK_WTI][OUT_INDEX] */
113
114	/* All processors set WTI mask using the physical address extension */
115
116	li t4, 1
117	sllv t4, t4, t1 /* Set XICU[MSK_WTI][INDEX][local_id] */
118
119	mtc2 t2, CP2_PADDR_EXT /* set PADDR extension */
120	sw t4, 0(t5) /* XICU[MSK_WTI][INDEX] <= t4 */
121	mtc2 zero, CP2_PADDR_EXT /* reset PADDR extension */
122
123	/*
124	* Only processor 0 in cluster 0 loads and executes the boot-loader
125	* We have:
126	* t0: global pid
127	* t1: local pid
128	* t2: cluster_xy
129	* t3: xicu physical base address in cluster 0
130	*/
131
132	bne zero, t0, _reset_wait
133	nop
134
135	/* Processor 0 initializes stack pointer */
136
137	la k0, _stack
138	li k1, RESET_STACK_SIZE /* k1 <= P0 stack size */
139	addu sp, k0, k1 /* P0 stack from base to (base + size) */
140
141	/* Processor 0 displays version for this reset code */
142
143	la a0, versionstr
144	jal reset_puts
145	nop
146
147	/* Processor 0 initializes the block device */
148
149	jal reset_ioc_init
150	nop
151
152	/*
153	* Processor 0 jumps to the reset_elf_loader routine passing as argument
154	* the block number in which is loaded the .elf file
155	*/
156
157	li a0, RESET_LOADER_LBA
158	jal reset_elf_loader
159	nop
160
161	/*
162	* Processor O jumps to the entry address defined in the .elf file, and
163	* returned by reset_elf_loader function.
164	* First argument is pointer to the preloader function vectors other
165	* function arguments are 0
166	*/
167
168	la a0, preloader_vector
169	move a1, zero
170	move a2, zero
171	move a3, zero
172	jr v0
173	nop
174
175	/*
176	* All processor (but processor 0) wait in low power mode until processor 0
177	* wakes them using an IPI.
178	* We have:
179	* t0: global id
180	* t1: local id
181	* t2: cluster id
182	* t3: xicu physical base address in cluster 0
183	*/
184
185	_reset_wait:
186
187	sll t4, t1, 2 /* t4 <= local_id * 4 */
188	addu t5, t4, t3 /* t5 <= &XICU[WTI_REG][local_id] */
189
190	wait
191
192	/*
193	* All other processors, when exiting wait mode, read from XICU the address
194	* to jump.
195	* This address is the boot-loader entry address that has been written in
196	* the mailbox by the IPI sent by processor 0
197	*/
198
199	mtc2 t2, CP2_PADDR_EXT /* set PADDR extension */
200	lw k0, 0(t5) /* k0 <= XICU[WTI_REG][local_id] */
201	mtc2 zero, CP2_PADDR_EXT /* reset PADDR extension */
202
203	jr k0
204	nop
205
206	/* Exception entry point */
207
208	.org 0x0380
209	_excep:
210	mfc0 a0, CP0_STATUS /* first arg is status */
211	mfc0 a1, CP0_CAUSE /* second arg is cause */
212	mfc0 a2, CP0_EPC /* third argc is epc */
213	mfc2 a3, CP2_DBVAR /* fourth argc is dbvar */
214	nop
215	j handle_except
216	nop
217
218	.end reset
219
220	.set reorder
221
222	.section .data
223
224	_stack:
225
226	.space RESET_STACK_SIZE
227
228	/*
229	* vim: tabstop=4 : shiftwidth=4 : expandtab
230	*/

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format