source: caseStudy_Huffmann/oldtran/changelog.txt @ 71

Last change on this file since 71 was 24, checked in by cecile, 13 years ago

plan du case study

  • Property svn:executable set to *
File size: 30.1 KB
Line 
1
2
3 Changelog history of the IEEEtran LaTeX class.
4 2007/03/05
5 by Michael Shell (MDS)
6 http://www.michaelshell.org/
7
8
9
10*******
11 3/2007 V1.7a (MDS) changes:
12
13 1) Corrected problem of unwanted two column peer review title page format.
14    Thanks to Virgilio Rodriguez for reporting this bug.
15
16 2) "depreciated" -> "deprecated". Thanks to Virgilio Rodriguez for
17    suggesting this change.
18
19
20
21*******
22 1/2007 V1.7 (MDS) changes:
23
24 1) New class option compsoc to support the IEEE Computer Society format.
25
26 2) New class option captionsoff disables the display of figure/table
27    captions. endfloat.sty is now mentioned in the docs. Thanks to Geoff
28    Walker for suggesting these changes.
29
30 3) Fixed compatibility issues with subfig.sty and caption.sty. Thanks to
31    Steven Douglas Cochran and Axel Sommerfeldt for suggesting this change.
32
33 4) New \CLASSINPUT, \CLASSOPTION and \CLASSINFO interface allows for more
34    user control and conditional compilation.
35
36 5) \ifcenterfigcaptions (\centerfigcaptionstrue, \centerfigcaptionsfalse),
37    \CMPARstart and \overrideIEEEmargins have been removed and no are
38    longer supported. The effect of \overrideIEEEmargins can be mimicked
39    via the more general \CLASSINPUT interface:
40    % US letter paper:
41    \newcommand{\CLASSINPUTinnersidemargin}{0.775in}
42    \newcommand{\CLASSINPUToutersidemargin}{0.585in}
43    % A4 paper:
44    \newcommand{\CLASSINPUTinnersidemargin}{17mm}
45    \newcommand{\CLASSINPUToutersidemargin}{11.647mm}
46
47 6) Several commands and environments have been deprecated in favor of
48    replacements with IEEE prefixes to better avoid potential future name
49    clashes with other packages. Legacy code retained to allow the use of
50    the obsolete forms (for now), but with a warning message to the console
51    during compilation:
52    \IEEEauthorblockA, \IEEEauthorblockN, \IEEEauthorrefmark,
53    \IEEEbiography, \IEEEbiographynophoto, \IEEEkeywords, \IEEEPARstart,
54    \IEEEproof, \IEEEpubid, \IEEEpubidadjcol, \IEEEQED, \IEEEQEDclosed,
55    \IEEEQEDopen, \IEEEspecialpapernotice. IEEEtran.cls now redefines
56    \proof in way to avoid problems with the amsthm.sty package.
57    For IED lists:
58    \IEEEiedlabeljustifyc, \IEEEiedlabeljustifyl, \IEEEiedlabeljustifyr,
59    \IEEEnocalcleftmargin, \IEEElabelindent, \IEEEsetlabelwidth,
60    \IEEEusemathlabelsep
61
62 7) These commands/lengths now require the IEEE prefix and do not have
63    legacy support: \IEEEnormaljot.
64    For IED lists: \ifIEEEnocalcleftmargin, \ifIEEEnolabelindentfactor,
65    \IEEEiedlistdecl, \IEEElabelindentfactor
66
67 8) \normalsizebaselineskip skip replaced by
68    \CLASSINFOnormalsizebaselineskip (nonrubber dimen) length.
69    Also, new \CLASSINFOnormalsizeunitybaselineskip (nonrubber dimen)
70    provided.
71
72 9) Now defaults to using Alpha numbering rather than Roman for appendices
73    numbering. This is because Alpha numbering is more common and avoids
74    problems with theorem numbering. \ifuseRomanappendices
75    (\useRomanappendicestrue, \useRomanappendicesfalse) is no longer
76    supported. Instead, use the new class option romanappendices if Roman
77    appendices numbering is desired. Thanks to Leonid Mirkin for reporting
78    the problem with theorems in appendices and suggesting changes.
79
8010) Improved paper size setting code for pdflatex.
81
8211) Better handling of theorem numbering when using the section counter
83    within the appendix(cies). Thanks to Leonid Mirkin for suggesting
84    this change.
85
8612) Fixed bug that caused equations at the end of theorems to be too
87    close to the line below them.
88
8913) Provided hook to conference mode console notice and changed notice to
90    better support conferences that use A4 paper. Thanks to Volker Kuhlmann
91    for suggesting this change.
92
9314) \IEEEauthorrefmark made robust to allow it to be used in \thanks
94    without a leading \protect
95
9615) Improved \textunderscore to provide a much better fake _ when used with
97    OT1 encoding. Under OT1, detect use of pcr or cmtt \ttfamily and use
98    available true _ glyph for those two typewriter fonts.
99
10016) Revised internal \@sect command to be more robust for users who employ
101    modified section heading formats. Thanks to Zarko F. Cucej for
102    suggesting this change.
103
10417) Improved \thesubsubsection definition to prevent breaks at the hyphen.
105    Thanks to Moritz Borgmann for suggesting this change. Thanks to
106    Dan Luecking and Heiko Oberdiek for explaining some of the various
107    alternatives and techniques to fix it.
108
10918) No longer provide \NAT@parse hack to get cite.sty to play (somewhat)
110    with hyperref.sty as this is already included in cite.sty version
111    4.0 (2003-05-27) and later.
112
11319) At the beginning of document, set the default style of url.sty to be
114    the same as the current text font - as is done in IEEE journals.
115
11620) Corrected excessive line spacing in journal table captions. Thanks to
117    Moritz Borgmann for suggesting this change.
118
11921) Corrected \thesubsubsection to use the "I-A1" format IEEE uses rather
120    than "I-A.1" as was done before. Ditto for \theparagraph. Thanks to
121    Moritz Borgmann for suggesting this change.
122
12322) Enclose papersize specials within \AtBeginDvi in case someone wants
124    to make a format with IEEEtran. Thanks to Moritz Borgmann for
125    suggesting this change.
126
12723) Eliminated the small space after abstract and keywords dash as IEEE
128    now does. Thanks to Moritz Borgmann for suggesting this change.
129
13024) IEEEkeywords is no longer locked out in conference mode
131
13225) Increase defaults of \binoppenalty and \relpenalty to discourage
133    breaks within equations. Thanks to Moritz Borgmann for suggesting
134    this change.
135
13626) Support optional argument for IEEEproof. Thanks to Ingo Steinwart for
137    suggesting this change. Also, start a new \par with \IEEEproof.
138
13927) Add support for an optional argument to \bstctlcite.
140
14128) Changed \topfraction and \dbltopfraction from 1.0 to 0.9. Thanks to
142    Donald Arseneau for suggesting this change.
143
144
145*******
146 09/2005 V1.6c (MDS) changes:
147
148 1) Changed endfigure/endfloat definitions so as not to cause problems with
149    preview-LaTeX and other packages. Thanks to Stephan Heuel and David
150    Kastrup for reporting this problem.
151
152
153
154*******
155 11/2002 V1.6b (MDS) changes:
156
157 1) Fixed problem with figure captions when using hyperref. Thanks to
158    Leandro Barajas and Michael Bassetti for reporting this bug.
159
160 2) Provide a fake nabib command \NAT@parse so that hyperref will not
161    interfere with the operation of cite.sty. However, as a result citation
162    numbers will not be hyperlinked. Also, natbib will not be able to work
163    with IEEEtran. However, this is perhaps the best solution until
164    cite.sty and hyperref.sty are able to co-exist with each other.
165    It easy enough to override the fake command via:
166    \makeatletter
167    \let\NAT@parse\undefined
168    \makeatother
169
170 3) Revised font selection method so as not to have problems when used
171    with setspace.sty. Thanks to Zhang Yan for reporting this bug.
172
173 4) Added \special to feed papersize to dvips. Thanks to Moritz Borgmann
174    for suggesting this feature.
175
176 5) In addition to the IEEE IED lists, the original IED style list
177    environments (as is done in article.cls) are now provided as
178    LaTeXitemize, LaTeXenumerate, and LaTeXdescription. Also, users can
179    now redefine \makelabel within IEEE IED list controls. There may be
180    some use for this in specialized applications. Thanks to Eli Barzilay
181    for suggesting this feature.
182
183 6) \table* now defaults to \footnotesize text like \table.
184
185 7) The draft modes now no longer force a pagebreak after the title.
186    Thanks to Christian Peel for suggesting this change.
187
188 8) New draftclsnofoot mode is like draftcls, but does not display the
189    date and the word "DRAFT" at the foot of the page. Thanks to
190    Christian Peel for suggesting this feature.
191
192 9) New peerreview and peerreviewca modes with \IEEEpeerreviewmaketitle
193    command allows for a "cover" titlepage for anonymous peer review.
194    Except for the cover titlepage, peerreview is much like journal mode.
195    peerreviewca is like peerreview, but allows the author names to be
196    entered and formatted as under conference mode so that author
197    affiliations and contact information can be easily seen on the cover
198    page. Thanks to Eric Benedict for suggesting this feature.
199
200
201
202*******
203 7/2002 V1.6 (MDS) changes:
204 
205 1) Added conference mode via conference option. Defaults to the
206    traditional journal mode. e.g., \documentclass[conference]{IEEEtran}
207 
208 2) Added support for A4 paper via new a4paper option. Pdflatex's paper
209    size lengths are now automatically set to the proper paper size being
210    used.
211 
212 3) Revised margins again. Page text is now horizontally centered.
213    Conference mode increases the top and bottom margins with the bottom
214    margin being slightly larger. For A4 paper, the top margin and text
215    typesetting will not change from those of US letter paper, but the side
216    margins will be smaller and the bottom margin will be larger than that
217    of US letter. All per IEEE specs.
218
219 4) Fixed footnote line spacing anomaly in draft mode.
220    Thanks to Alberto Rodriguez for reporting this bug.
221   
222    Also, slightly revised footnote and \thanks note spacing.
223    Set \interfootnotelinepenalty=10000 to prevent LaTeX
224    from breaking footnotes across multiple pages or columns.
225
226 5) Fixed bug that caused overwritten photo areas and sometimes anomalous
227    spacing when a new paragraph was started within a biography. Also,
228    the presence of \par's, new lines or spaces at the beginning of
229    abstract, keywords, biography, or biographynophoto will no longer
230    affect the first word spacing.
231    Thanks to Eric Durant for reporting this bug.
232   
233    The biography environment now does a better job in preventing
234    a biography photo area from being broken across pages or columns.
235
236 6) Fixed whitespace between \cite entries bug. i.e.,
237    both \cite{einstein24, knuth84} and \cite{einstein24,knuth84}
238    are now valid. \cite is now a robust command as it should be.
239    IEEEtran now no longer defines the old non-standard \shortcite or
240    \citename.
241   
242    The base IEEEtran.cls does not sort citation numbers or produce ranges
243    for three or more consecutive numbers. However, V1.6 of IEEEtran.cls
244    now pre-defines the following format control macros to facilitate easy
245    use with Donald Arseneau's cite.sty package (tested with cite.sty V3.9): 
246
247    \def\citepunct{], [}
248    \def\citedash{]--[}
249   
250    cite.sty is standard on most LaTeX sytems and can be obtained from
251    www.ctan.org. Thanks to Donald Arseneau for creating cite.sty,
252    providing the required format arguments to produce the IEEE style
253    and designing a cite interface capable of handling the IEEE citation
254    style.
255   
256    Note: Historically, IEEE has wanted authors to "hardcode" symbolics.
257    (i.e., replace all \cite{} with fixed [x]). However, it now seems that
258    most electronic manuscript submissions to IEEE are in .pdf format, and
259    as such, do not require the LaTeX document reference numbers to be hard
260    coded. If an author is required to submit actual LaTeX files, I do
261    recommend that the bibliography file (.bbl) be copied into the .tex
262    document and the \bibliographystyle{} and \bibliography{} commands be
263    commented out so that the .tex file does not depend on (potentially
264    lengthy and/or confidential) external bibliography database files
265
266 7) Adjusted some spacing parameters. The spacing above and below equations
267    has been revised (to a typical IEEE value). \jot now has a decent value.
268    The title text is now exactly 24pt. (On a related note, \fontsubfuzz has
269    been increased to 0.9pt to prevent annoying font substitution warnings
270    when using the Computer Modern fonts that use the 24.88pt size.)
271    In V1.6, \small is now 8.5pt in 9pt docs because \footnotesize is 8pt.
272    For 9pt docs, you should probably go ahead and use \footnotesize when
273    you need text a little smaller than \normalsize.
274    The interword spacing has been adjusted to be extremely close to that
275    which IEEE uses. You can use a new class option, nofonttune, if you need
276    to disable the adjusting of the interword spacing. This adjustment and
277    an increase to \hyphenpenalty have greatly reduced the amount of
278    hyphenation in a typical paper.
279       The baselineskip for the normalsize fonts has been tweaked to reduce
280    underfull vboxes on journal paper columns with only paragraphs.
281    Conference mode does the same thing but by also tweaking the \textheight
282    slightly off 9.25in (IEEE spec) to ensure an integer number of lines per
283    page. Draft (also draftcls) mode has also been revised to reduce
284    underfull vbox warnings. However, draft mode can still produce underfull
285    vboxes (a direct result of the increase in line spacing and margins) if:
286    A non-normalsize font occupies an entire column (abstract and index
287    terms take up a whole column by themselves); or the beginning of a
288    section occurs near the end of a column and cannot be squeezed into the
289    bottom, etc. This is normal as draft mode's liberal spacings cannot
290    guarantee perfect formatting.
291
292 8) New biographynophoto environment for biographies without photos.
293    Usage:
294   
295    \begin{biographynophoto}{author name}
296    biography text here
297    \end{biographynophoto}
298   
299 9) Fixed bug that produced multiple table of contents entries for papers
300    with more than one biography. Also, biography now works better with
301    hyperref.
302 
30310) New \sublargesize font size command provides for 11pt text in a 10pt
304    document. (Needed for things like author names.) For documents not
305    using 10pt normal size text, \sublargesize is currently identical
306    to \large.
307
30811) New \IEEEmembership command to provide correct font to indicate IEEE
309    membership for journal papers.
310
31112) Fixed author name line overflow problem when in journal mode. This
312    problem had been introduced in V1.5 in my rush to get \and to work for
313    conferences. \and is unneeded (and invalid) in journal mode. For
314    conference mode, \and will work as expected and features an optional
315    spacing argument. i.e., \and[\hspace{5ex}]
316    \and will default (recommended) to using \hfill which will result in
317    equal spacing between author blocks.
318 
31913) New \authorblockN, \authorblockA and \authorrefmark commands to
320    facilitate easy formatting of author names, affiliations and cross
321    reference symbols, respectively, when in conference mode. These
322    three commands are to be used only for conference papers.
323    In conference mode, \author text is placed within a modified tabular
324    environment (somewhat like article.cls). So, within \author in
325    conference mode, you should not try to enclose multiple \\ within an
326    environment or command (other than the argument braces of
327    \authorblockX{}). For example:
328   
329    \author{\authorblockN{{John Doe \\ Jane Doe}}} % WRONG!
330   
331    will generate an error.
332 
333    Note that font size/attribute changes will now persists across \\
334    within \author. (But, not across author blocks nor across \and.)
335    However, with the new commands, there should be no need to alter any
336    font attributes within \author. All text sizing and spacing within
337    \author{} and the author block commands is per IEEE specs for both
338    conference and journal modes. (In conference mode, the author names
339    are only very slightly larger than the affiliations which are in normal
340    size.) For specialized applications you can alter the justification of
341    author lines by placing \hfill at the beginning or at the end of a line.
342    The interline spacing within \author is determined by the font
343    attributes that are in effect at the end of each line within author.
344 
34514) Because the titles and author name blocks use different font
346    sizes/styles from the main text, it was possible that two column papers
347    with titles that span both columns (standard journal and conference
348    papers, but not technotes) with certain numbers of lines for the title
349    and authors' name/affiliations can cause underfull vbox problems
350    (paragraphs with large spacings between them) in the second column of
351    the main text on the title page - if there were no new sections,
352    equations or figures in this column (they would provide some needed
353    rubber spacing). The use of things like special paper notices and
354    publisher ID marks also affected this issue. The problem could not
355    happen in the first column because the first column has a rubber length
356    around the heading of the first section. Furthermore, problems seldom
357    occurred on pages after the first as the margins had been chosen not to
358    cause it with the popular font sizes. Rubber lengths after the author
359    names would not fix this problem.
360       Auto-calculating a "good" spacing after the title is a tad difficult
361    to do in LaTeX. However, I am pleased to report that V1.6 has this new
362    capability - "dynamically determined title spacing". IEEEtran will now
363    measure the height of all the title and author text in \maketitle
364    and then calculate a rigid (non-rubber) spacer to follow that meets
365    IEEE specs and also produces a \textheight on the title page that
366    ensures an integer number of normalsized lines on the rest of the page.
367    Single column  papers, and two column papers with the title entirely in
368    column one (technotes) do not need dynamic rigid spacing and therefore
369    use standard rubber spacers.
370   
371    Note: This problem can still crop up if you use floats that span both
372    columns (i.e., figure*). It has been a decade+ long limitation with
373    LaTeX that the stretchable portion of \dbltextfloatsep is ignored.
374    If you get a problem with underful vbox warnings and paragraphs that
375    "are pulled apart" on page with a float that spans both columns, tweak
376    the space between the figure and the main text a little:
377   
378    \vskip 5pt
379    \end{figure*}
380   
381    If you can't find a value that fixes both columns, you are going to
382    have to put a rubber spacer somewhere in one or both of the columns.
38315) Because of change #14 above, those of you using \pubid will, as of V1.6,
384    have to place it *before* \maketitle in order for it have the intended
385    affect. The dynamic spacer algorithm must see if you are using \pubid
386    when \maketitle is called. \pubidadjcol works as before except that it
387    now has additional logic to prevent it from doing anything if \pubid
388    was never called.
389   
39016) In some unusual, non-standard circumstances, an author may desire to
391    alter the spacing after the title area or put some unusual text above
392    the main text. For instance, to stop a bad break when a new section
393    occurs right at the start of the second page. This is difficult to do
394    when the title spans both columns of two column text since LaTeX treats
395    such title text as a type of float. A new command,
396    \IEEEaftertitletext{}, gives access to the end of that produced by
397    \maketitle. The types of things that can go into \IEEEaftertitletext
398    are the same as those into \twocolumn[] - no \par, but \\ are OK. There
399    is no restriction on the range of spacings that can be used. e.g.,
400    \IEEEaftertitletext{\vspace{-100pt}} will push the main text well into
401    the title and \IEEEaftertitletext{\vspace{100pt}} will push it far down
402    the page. You will have complete control. If used, place
403    \IEEEaftertitletext{} before \maketitle like \title and \author.
404    IEEEtran's dynamic title spacing intentionally does not take into
405    consideration the contents of \IEEEaftertitletext{} when determining
406    the spacer after the title area (otherwise it would try to second
407    guess you), so the user will have manually adjust the height of the
408    contents in \IEEEaftertitletext{} if the problem discussed in #14 above
409    should develop. A safe bet is to keep the height of contents of
410    \IEEEaftertitletext{} to integer multiples of \baselineskip, e.g.,
411    \IEEEaftertitletext{\vspace{-1\baselineskip}}
412   
413    Because it can result in an IEEE nonstandard format, the use of
414    \IEEEaftertitletext{} is discouraged. Possible uses include (1) the use
415    of IEEEtran for non-IEEE work with different title spacing requirements,
416    or (2) as an emergency manual override if a problem should develop in
417    IEEEtran's automatic spacing algorithm.
418 
41917) completely rewritten \PARstart to:
420    a. no longer have problems when the user begins an environment
421       within the paragraph that uses \PARstart.
422    b. auto-detect and use the current font family
423    c. revise handling of the space at the end of the first word so that
424       interword glue will now work as normal.
425    d. produce correctly aligned edges for the (two) indented lines.
426
427    Because the current font family is now auto-detected, there is no
428    longer any need for \CMPARstart - it is now the same as \PARstart.
429   
43018) There is now a new "open box" Q.E.D. symbol (\QEDopen) as well as the
431    original default (\QED) closed one (\QEDclosed). Some journals use
432    the open form. To make \proof use the open form, just do:
433    \renewcommand{\QED}{\QEDopen}
434
43519) Additional \typeout{} notices added to warn the user when unusual
436    settings/commands are detected or as reminders to avoid common errors
437    when in conference mode.
438
43920) IEEEtran now provides \abovecaptionskip and \belowcaptionskip skip
440    registers because article class provides them and some packages
441    may error if they are missing. However, IEEEtran only uses
442    \abovecaptionskip for actual caption spacing.
443
44421) Fixed bug that prevented users from redefining the section headings
445    to use arabic digits. Thanks to Richardt H. Wilkinson for reporting
446    this bug.
447
44822) Code cleaned up to be more efficient with the use of TeX registers;
449    removed some old LaTeX 2.09 code; revised option processing to
450    LaTeX2e standard; eliminated unwanted "phantom" spaces in some
451    environments.
452
45323) Added new \IEEEeqnarray, \IEEEeqnarraybox, \IEEEeqnarrayboxm and
454    \IEEEeqnarrayboxt environments to provide superior alternatives to the
455    standard LaTeX \eqnarray, \array and \tabular. Additional new support
456    commands include \IEEEeqnarraydecl, \IEEEeqnarrayboxdecl,
457    \IEEEeqnarraymathstyle, \IEEEeqnarraytextstyle, \yesnumber.
458    \IEEEnonumber, \IEEEyesnumber, \IEEEyessubnumber, \IEEEeqnarraynumspace,
459    \IEEEeqnarraymulticol, \IEEEeqnarrayomit, \IEEEeqnarraydefcol,
460    \IEEEeqnarraydefcolsep, \IEEEeqnarrayseprow, \IEEEeqnarrayseprowcut,
461    \IEEEeqnarrayrulerow, \IEEEeqnarraydblrulerowcut,
462    \IEEEeqnarraystrutmode, \IEEEeqnarraystrutsize,
463    \IEEEeqnarraystrutsizeadd, \IEEEvisiblestrutstrue,
464    \IEEEvisiblestrutsfalse and \IEEEstrut.
465    These are documented in the user's guide.
466   
46724) V1.6 changed back to using () around theorem names (which are also now
468    in italics) as this is what IEEE is using now. Thanks to Christian Peel
469    for reporting this. Also, when section numbers are used as the first
470    part of theorem numbers, display them in arabic, not Roman.
471   
47225) New \IEEEtriggeratref{X} command allows a page break to be triggered
473    just before the given reference number "X". This is most useful when
474    balancing the columns on the last page and a \newpage between references
475    is desired. \IEEEtriggercmd{X} allows a different command to be executed
476    at trigger.
477
478
479
480*******
481 7/2001 V1.5 (MDS) changes:
482
483
484 1) Fixed \and within \author bug: (! Misplaced \crcr. \endtabular ->\crcr)
485    Thanks to Rainer Dorsch for discovering and reporting that \and
486    did not work.
487   
488 2) Fixed the biography environment so that if a biography's text is shorter
489    than the area allocated for the photo, a collision with the next
490    biography does not occur. You can now put real graphics (using the
491    graphicx package) into the biography photo box with a new optional
492    argument of the biography command! For example:
493   
494    \begin{biography}[{\includegraphics[width=1in,height=1.25in,clip,
495                      keepaspectratio]{./tux.eps}}]{Linux Penguin}
496   
497    will use the specified graphic as the author's photo. The photo area is
498    exactly 1in wide by 1.25in high - as is done in IEEE Transactions. Try
499    to keep the same 4:5 aspect ratio if scanning/cropping your photos.
500    Note the need for the extra set of enclosing braces around the
501    \includegraphics. Without it, The LaTeX parser may get confused when it
502    sees the \includegraphics's brackets within the biography's optional
503    argument. Due to the length of the \includegraphics command, you may
504    wish to define your own shorthand form of it. I have not done so with
505    IEEEtran to prevent dependence on the graphicx package. If you do not
506    use the optional argument, or leave it empty, a standard frame box
507    with the words "Place Photo Here" will be used. If you want the space
508    to remain completely empty, you can do:
509   
510    \begin{biography}[\mbox{}]{The Invisible Man}
511   
512    The interface to biography's optional argument is into a
513    1in X 1.25in minipage in which the argument text is centered both
514    horizontally and vertically:
515   
516    \begin{minipage}[b][1.25in][c]{1in}%
517    \centering
518    #1%
519    \end{minipage}
520   
521    Within the biography environment, \unitlength is set to 1in.
522    With this in mind, you can even design your own custom frameboxes.
523    For instance:
524   
525    \begin{biography}[\framebox(1,1.25){\parbox[][\height
526                     ][c]{0.9in}{\centering PLACE\\ PHOTO\\
527                                  HERE}}]{Author Name}
528   
529    will yield the same type of result as the default photo box.
530   
531    Thanks to Herbert Voss for discovering the collision bug, suggesting
532    the ability to handle graphics and providing some prototype code.
533
534
535
536*******
537 3/2001 V1.4 (MDS) changes:
538
539
540 1) New "draftcls" and "final" options have been added.
541    Thanks to Dragan Cvetkovic for suggesting an option like draftcls.
542   
543 2) Documentation changes to reflect the fact that this IEEEtran.cls
544    is no longer beta test.
545
546 3) Slightly revised caption sizes. Figure and table captions are now
547    in \footnotesize, not \small as before.
548
549 4) Allow user to control figure caption justification. IEEEtran.cls
550    normally defaults to left justified as is done in Transactions.
551    However, for conferences, you may wish to issue the command:
552    \centerfigcaptionstrue
553    in the preamble. Short (less than one line long) figure captions
554    will then be centered. Multi-line figure captions will always be
555    properly left justified. V1.6: This is already done for you when
556    using the conference mode.
557
558
559
560*******
561 1/2001 V1.3
562 Michael Shell (MDS) made extensive changes and additions:
563
564
565 BUGS FIXED (and many others too numerous to mention!):
566 1) Fixed improper alignment with itemized, enumerated and
567    description lists. Added new controls to these three
568    environments so that it is easy to get the alignment IEEE
569    uses. Furthermore, the itemize, enumerate and description lists
570    no longer force a new paragraph to begin at the end the list
571    (\par). (Sometimes lists are used within paragraphs.)
572 
573 2) JVH's fixes now allow things like $\mathbf{N}(0,P(0))$
574    to work properly without needing the extra braces:
575    ${\mathbf{N}}(0,P(0))$. There is no longer any dependence
576    on the "rawfonts" and "oldlfont" packages. Thanks Juergen!
577 
578 3) Fixed underfull hbox errors and incorrect reference number
579    alignment when the number of references in the bibliography
580    exceeded 9 entries (which is almost every paper!).
581 
582 4) Removed dependence on the LaTeX sizexx.clo files.
583    Now, 9pt documents should work correctly even on systems that
584    lack a size9.clo file. This is most often used in conjunction
585    with the option "technote" for "correspondence" papers like those
586    in IEEE Transactions on Information Theory. For virtually all
587    other papers, 10pt is used and so it is the default.
588    Some improper font sizes have been corrected. \footnotesize is
589    now 8pt in 9pt docs, so footnotes in technotes should be the
590    correct size now.
591 
592 5) Added \interlinepenalty within the bibliography section to discourage
593    LaTeX from breaking within a reference. IEEE almost never breaks within
594    a reference and when they do it is usually in technotes
595    (correspondence papers). You may get an underfull vbox warning in the
596    bibliography indicating that the spacing just before the "REFERENCES"
597    section is larger than normal, but the final result will be more like
598    what IEEE will publish. See the comments in the BIBLIOGRAPHY section
599    around line 2034 below if you want to change this behavior.
600
601 6) No longer "blows up" when you use \paragraph and have a table
602    of contents.
603 
604 7) Theorem environment changed, (but for V1.6, back to the old way, sigh).
605 
606 8) Figure captions adjusted: IEEE left (not center) justifies
607    figure captions (for journals) and does not indent figure caption text.
608 
609 9) Adjusted some spacings in the table of contents(TOC))/list-of-figures/
610    list-of-tables so that section/table numbers will not so easily
611    collide with the titles. Section VIII was usually the worst offender.
612    Still doesn't right justify the section numbers, but neither does
613    article.cls (This must be why LaTeX likes the x.y.z section numbering
614    scheme unlike I, II, III, etc. of IEEE. )
615    It may be "normal" as it is (left justified). sigh.
616 
61710) Now uses "index terms" now as a heading instead of "keywords".
618    Furthermore, the "index terms" and "abstract" headings are in bold
619    italic. This is how IEEE does things.
620
62111) \thebibliography and \biography now put entries into
622    the table of contents for you.
623
624*******
625
626
627
628
629
630
631 *******
632 9/2000 (JVH) changes: (now designated as V1.2)
633 
634 made some corrections to get closer to LaTeX2e
635 20000906 Juergen v.Hagen
636 vonhagen@ihefiji.etec.uni-karlsruhe.de
637
638 Permission to redistribute granted as of December 2000.
639 *******
640
641
642
643
644
645 *******
646 
647 1996 (JWD) LaTeX2e version: (now designated as V1.1)
648 
649 In the most recent TeXhax digest, there was a request for a copy of
650 IEEEtrans.sty modified to work with LaTeX2e.  I have a version I
651 modified to make it IEEEtrans.cls, which I have sent to the person
652 making the request and am now sending to you to consider posting to
653 the archives.
654 --
655 Jon Dixon
656 dixonj@colorado.edu
657 http://spot.colorado.edu/~dixonj/
658
659*******
660
661
662
663
664
665*******
666
667 30-August-1993 original LaTeX 2.09 version (IEEEtran.sty),
668 (now designated as V1.0):
669
670 by Gerry Murray and Silvano Balemi
671 Automatic Control Lab, ETH Zurich, Switzerland
672 balemi@aut.ee.ethz.ch
673
674*******
675
676
677
Note: See TracBrowser for help on using the repository browser.