source: vis_dev/cusp-1.1/Makefile.in @ 104

Last change on this file since 104 was 12, checked in by cecile, 13 years ago

cusp added
File size: 21.3 KB
Line 
1# FileName      [ Makefile.in ]
2#
3# PackageName   [ CUSP ]
4#
5# Synopsis      [ Package-wide Makefile ]
6#
7# Description   [ This file requires GNU's make program.
8#                 Run "configure" to generate the Makefile, or use
9#                 "config.status" (created by configure) to regenerate the
10#                 Makefile after modifying this file.
11#
12#                 Type "gmake help" for help about valid targets.
13#                ]
14#
15#
16# Author        [ HoonSang Jin <jinh@colorado.edu> ]
17#
18# Copyright     [
19#  Copyright (c) 2002-2008, Regents of the University of Colorado
20
21#  All rights reserved.
22
23#  Redistribution and use in source and binary forms, with or without
24#  modification, are permitted provided that the following conditions
25#  are met:
26
27#  Redistributions of source code must retain the above copyright
28#  notice, this list of conditions and the following disclaimer.
29
30#  Redistributions in binary form must reproduce the above copyright
31#  notice, this list of conditions and the following disclaimer in the
32#  documentation and/or other materials provided with the distribution.
33
34#  Neither the name of the University of Colorado nor the names of its
35#  contributors may be used to endorse or promote products derived from
36#  this software without specific prior written permission.
37
38#  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
39#  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
40#  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
41#  FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
42#  COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
43#  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
44#  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
45#  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
46#  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
47#  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
48#  ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
49#  POSSIBILITY OF SUCH DAMAGE.
50#  ]
51#
52# Revision      [$Id: Makefile.in,v 1.18 2009-04-14 02:36:20 hhhan Exp $]
53
54.PHONY : default
55
56default : all
57
58
59PKGS = sat smt aig util st array
60
61#----------------------------------------------------------------------
62# For safety
63#----------------------------------------------------------------------
64
65SHELL = /bin/sh
66.SUFFIXES:
67
68#----------------------------------------------------------------------
69# The name of the product and its version
70#----------------------------------------------------------------------
71
72PRODUCT = cusp
73VERSION = 1.1
74
75# Compile and version information
76#
77# CUR_DATE and CUR_VER are strings surrounded by double quotes that contain
78# spaces, e.g., "vis release 2.0"
79
80VERDATE := -DCUR_DATE="\"$(shell date)\"" -DCUR_VER="\"$(PRODUCT) release $(VERSION)\""
81
82#----------------------------------------------------------------------
83# Source directories
84#----------------------------------------------------------------------
85
86# Directory containing master source files.  This directory is searched
87# for packages NOT listed in the PKGS variable.  Defaults to "."
88# Override with  ./configure --srcdir=
89master_srcdir = @srcdir@
90
91# Directory containing local source files.  This directory is searched
92# for packages listed in the PKGS variable.  Defaults to the master source
93# directory (see above).
94# Override with ./configure --with-local-srcdir=
95local_srcdir =  @local_srcdir@
96
97# Directory where object files will be placed during the build
98objectdir =     obj
99
100# Directory where links to header files will be placed during the build
101headerdir =     $(master_srcdir)/include
102
103# hsjin : -DCirCUsALLSAT is compile option for SAT package
104AC_FLAGS =      @DEFS@ -DCirCUsALLSAT
105LIBDIRS =       @LIBDIRS@
106RANLIB =        @RANLIB@
107CC =            @CC@
108LINKER =        @LINKER@
109LDFLAGS =       @LDFLAGS@
110#
111# Define the linker for the executable with "memory_profile" activated
112#
113PLINKER =       @PLINKER@
114CFLAGS =        @CFLAGS@ -Wall
115OTHERLIBS =     -lm @LIBS@ @LEXLIB@
116YACC =          @YACC@
117LEX =           @LEX@
118NAWK =          @AWK@
119INSTALL =       @INSTALL@
120INSTALL_PROGRAM = @INSTALL_PROGRAM@
121INSTALL_DATA =  @INSTALL_DATA@
122AR =            @AR@
123
124#----------------------------------------------------------------------
125# Installation names and directories
126#----------------------------------------------------------------------
127
128# Name of the library to create
129LIBRARY =       lib$(PRODUCT).a
130
131# Directory in which to install architecture-independent files
132# Set by ./configure --prefix=...
133prefix =        @prefix@
134
135# Directory in which to install architecture-dependent files
136# Set by ./configure --exec-prefix=...
137exec_prefix =   @exec_prefix@
138
139# Directory in which to install binaries
140bindir =        $(exec_prefix)/bin
141
142# Directory in which to install libraries
143libdir =        $(exec_prefix)/lib
144
145# Directory in which to install headers
146includedir =    $(prefix)/include
147
148
149#----------------------------------------------------------------------
150# Include the make templates from all the packages
151#
152# Each of these templates (e.g., array/array.make) should contains lines
153# of the form
154#
155# CSRC += source1.c source2.c
156# HEADERS += header1.h header2.h
157# LEXSRC += file1.l
158# YACCSRC += file2.y
159# GENERATEDCSRC += smtLex.c smtRead.c
160#----------------------------------------------------------------------
161
162MAKEINCLUDES = $(foreach package, $(PKGS), \
163        $(master_srcdir)/src/$(package)/$(package).make)
164
165include $(MAKEINCLUDES)
166
167OBJECTS = $(addprefix $(objectdir)/,$(GENERATEDCSRC:.c=.o) $(CSRC:.c=.o))
168
169#----------------------------------------------------------------------
170# Include the dependency files from each package directory.
171# A missing dependency file does not produce an error.
172#----------------------------------------------------------------------
173
174DEPENDENCIES = $(foreach package, $(PKGS), \
175        $(master_srcdir)/src/$(package)/$(package).d)
176
177-include $(DEPENDENCIES)
178
179INCLUDEDIRS = \
180                $(foreach package, $(PKGS), -I$(master_srcdir)/src/$(package)) \
181                -I$(objectdir)
182
183LIBRARYDIRS = $(LIBDIRS)
184
185LIBS = $(OTHERLIBS)
186
187VPATH = $(master_srcdir): \
188        $(addprefix :$(master_srcdir)/src/,$(PKGS)): \
189        $(objectdir):
190
191#GMPLIBS = -lgmp
192
193#gmplibdir = /usr/lib/
194
195#----------------------------------------------------------------------
196# Examples included in the distribution
197#----------------------------------------------------------------------
198
199# Each example is declared only once. If some checking through is done
200# make check, then it is declared in one of CHECK_CNF_EXAMPLES,
201# CHECK_SMT_EXAMPLES. If the example
202# is just being added to the examples directory in VIS, then add it here.
203
204EXAMPLES = $(CHECK_CNF_EXAMPLES) $(CHECK_SMT_EXAMPLES)
205
206# The "interesting" example files are anything in the examples subdirectories
207# except the RCS subdirectories
208#
209# This is a rather messy way to look for filenames in the local_srcdir,
210# then remove the local_srcdir prefix
211
212EXAMPLEFILES = $(patsubst $(local_srcdir)/%, %, \
213                $(filter-out %RCS, $(foreach example, $(EXAMPLES), \
214                  $(wildcard $(local_srcdir)/examples/$(example)/*))))
215
216#----------------------------------------------------------------------
217# Definitions for the distribution file
218#----------------------------------------------------------------------
219
220DISTRIBUTION = $(PRODUCT)-$(VERSION)
221
222# Directories to include in the distribution file
223
224DISTDIRS = src helpers share share/help obj doc examples \
225        $(addprefix examples/,$(EXAMPLES)) $(addprefix src/,$(PKGS))
226
227# Build/install helper files
228
229HELPERS = $(addprefix helpers/, \
230        install-sh mkinstalldirs config.guess config.sub dependency.make)
231
232# Files to include in the distribution file
233
234DISTFILES = \
235        configure configure.in Makefile.in README $(HELPERS) \
236        $(CSRC) $(HEADERS) $(LEXSRC) $(YACCSRC) $(MAKEINCLUDES) \
237        $(EXAMPLEFILES) \
238        $(addprefix doc/,$(DOCUMENTATION)) \
239        $(addprefix share/,$(SHAREFILES)) \
240        $(addprefix share/help/,$(HELPFILES))
241
242#----------------------------------------------------------------------
243# Implicit rules
244#----------------------------------------------------------------------
245
246ALLCFLAGS = $(CFLAGS) $(AC_FLAGS) -DBDDcu $(VERDATE) \
247                -DNAWK=\"$(NAWK)\" -DLIBRARY=\"$(datadir)\"
248
249# For compiling a source file into the object directory
250
251$(objectdir)/%.o : %.c
252        umask 2 ; $(CC) -c $(ALLCFLAGS) $(INCLUDEDIRS) -o $@ $<
253
254# Place object files into an archive
255
256%.a :
257        rm -f $@
258        umask 2; $(AR) cq $@ $^
259        $(RANLIB) $@
260
261######################################################################
262#                               RULES                                #
263######################################################################
264
265#:
266#: Useful targets:
267#:
268
269#----------------------------------------------------------------------
270# Rule for getting help
271#----------------------------------------------------------------------
272
273.PHONY : help
274
275#: help -- Print a list of targets
276
277# This prints all lines in this Makefile that begin with #:
278
279help :
280        @sed -n "s/^#://p" Makefile
281
282#----------------------------------------------------------------------
283# Always executed once when the Makefile is run
284#----------------------------------------------------------------------
285
286# Make sure the directory in which to place the objects exists
287
288ignored := $(shell umask 2; test -d $(objectdir) || mkdir $(objectdir))
289
290#----------------------------------------------------------------------
291# Rules to compile and build libraries and executables
292#----------------------------------------------------------------------
293
294.PHONY : all library compile-version delete-version
295
296#:
297#: all (the default) -- Compile the main executable
298# (force the version to be recompiled)
299
300all : compile-version $(PRODUCT)
301
302# Create the main executable
303
304$(PRODUCT) : $(OBJECTS)
305        umask 2 ; $(LINKER) -o $(PRODUCT) $(LDFLAGS) \
306                $(OBJECTS) $(LIBRARYDIRS) $(LIBS) -ldl 
307
308#$(PRODUCT) : $(OBJECTS) $(gmplibdir)/libgmp.la
309#       umask 2 ; $(LINKER) -o $(PRODUCT) $(LDFLAGS) \
310#               $(OBJECTS) $(LIBRARYDIRS) $(LIBS) -ldl $(GMPLIBS)
311
312# Force the "version" information to be recompiled
313
314compile-version : delete-version $(objectdir)/main.o
315
316# Delete the object file related to the version
317
318delete-version :
319        rm -f $(objectdir)/main.o
320
321# Build a library containing all the objects
322
323#: library -- Create a library of all the objects (useful in a central area)
324
325library : $(LIBRARY)
326
327$(LIBRARY) : $(OBJECTS)
328
329#----------------------------------------------------------------------
330# Rules for checking the build
331#----------------------------------------------------------------------
332.PHONY : check check-examples
333
334# This is a lengthy sed command used to filter out the irrelevant CUSP
335# output that appears when the examples are running.
336#
337# Sed does not permit space between the trailing p ("print matching
338# lines") and the semicolon (end of command).  Hashes are escaped --
339# otherwise they are Makefile comments.  This was once a long egrep
340# expression, but the string was too long for Ultrix's egrep.
341
342SED_CMD = \
343        /^UNSATISFIABLE/p; \
344        /^SATISFIABLE/p; \
345        /^unsat/p; \
346        /^sat/p; \
347        /;.*;/p;
348
349# List of all examples to check (A subset of EXAMPLES)
350
351CHECK_CNF_EXAMPLES = arbiter daio 3blocks bw_large.a hanoi4 rot
352
353CHECK_SMT_EXAMPLES =  2ba bignum_idl1 bignum_idl2 bignum_rdl1 bignum_rdl2 \
354                BinarySearch_live_blmc000 CELAR6_SUB0 ckt_PROP14_tf_9 \
355        diamonds.10.2.i.a.u DTP_k2_n35_c175_s1 FISCHER3-4-ninc fischer3-mutex-5 \
356        inf-bakery-mutex-1 int_incompleteness1 jobshop4-2-2-2-4-4-12 plan-5.cvc
357
358CHECK_EXAMPLES = $(CHECK_SMT_EXAMPLES) $(CHECK_CNF_EXAMPLES)
359
360# Determine the absolute executable path
361#
362# Starting from the current directory, change directory to the directory
363# part of the product name, then tack on the filename part of EXECUTABLE
364
365EXECUTABLE = $(PRODUCT)
366
367EXECUTABLEPATH := \
368        $(shell cd $(dir $(EXECUTABLE)) ; pwd)/$(notdir $(EXECUTABLE))
369
370EXECUTABLEPATH := \
371        $(shell cd $(dir $(EXECUTABLE)) ; pwd)/$(notdir $(EXECUTABLE))
372
373# Determine the rootname of the examples
374#
375
376EXAMPLEPATH = $(master_srcdir)/examples
377
378FULLEXAMPLEPATH := $(shell cd $(EXAMPLEPATH) ; pwd)
379
380#:
381#: check -- Test the locally-built executable (runs check-examples)
382#:          Include check-cnf-simp-examples to check the cnf solver
383#:          with its preprocessors. For example,
384#
385# check : check-cnf-examples check-cnf-simp-examples check-smt-examples
386#
387check : check-cnf-examples check-smt-examples
388
389#: check-examples -- Test each of the examples listed in CHECK_EXAMPLES
390#:          You may want to invoke this with
391#:            gmake "CHECK_EXAMPLES=abp bakery" check-examples
392#:            gmake EXECUTABLE=cusp check-smt-examples
393
394# For each example,
395#
396# 1) create the directory checkresults/<example>
397# 2) enter that directory
398# 3) run CUSP for the example  producing "result.raw"
399# 5) filter out relevant lines in the result, producing "result.filtered"
400#    and compare this with the "check_result" file in the master source
401#    directory.  Differences are written to "result.differences"
402check-cnf-examples :
403        @test -d checkresults || mkdir checkresults
404        @echo "Checking examples.  Results will be in checkresults/<example>/result.raw"
405        @echo "Running executable $(EXECUTABLEPATH) for CNFs "
406        @echo " (change with EXECUTABLE=...)"
407        @echo "Taking examples from $(FULLEXAMPLEPATH)"
408        @echo " (change with EXAMPLEPATH=...)"
409        @cwd=`pwd` ; \
410        for example in $(CHECK_CNF_EXAMPLES) ; \
411        do \
412          echo -n "Checking $(EXECUTABLEPATH) $$example ... " ; \
413          cd $$cwd ; \
414          test -d checkresults/$$example || \
415                mkdir checkresults/$$example ; \
416          cd checkresults/$$example ; \
417          $(EXECUTABLEPATH) -cnf $(FULLEXAMPLEPATH)/$$example/$$example.cnf > result.raw 2> result.stderr ; \
418          sed -n '$(SED_CMD)' result.raw > result.filtered ; \
419          if diff result.filtered \
420                $(FULLEXAMPLEPATH)/$$example/check_result > result.differences ; \
421          then \
422            echo "passed" ; \
423            rm result.differences ; \
424          else \
425            echo "failed (more checkresults/$$example/result.differences)" ; \
426          fi ; \
427        done
428       
429check-cnf-simp-examples :
430        @test -d checkresults || mkdir checkresults
431        @echo "Checking examples.  Results will be in checkresults/<example>/result.raw"
432        @echo "Running executable $(EXECUTABLEPATH) for CNFs "
433        @echo " (change with EXECUTABLE=...)"
434        @echo "Taking examples from $(FULLEXAMPLEPATH)"
435        @echo " (change with EXAMPLEPATH=...)"
436        @cwd=`pwd` ; \
437        for example in $(CHECK_CNF_EXAMPLES) ; \
438        do \
439          echo -n "Checking $(EXECUTABLEPATH) $$example ... " ; \
440          cd $$cwd ; \
441          test -d checkresults/$$example || \
442                mkdir checkresults/$$example ; \
443          cd checkresults/$$example ; \
444          $(EXECUTABLEPATH) -cnf $(FULLEXAMPLEPATH)/$$example/$$example.cnf -velim -distill > result.raw 2> result.stderr ; \
445          sed -n '$(SED_CMD)' result.raw > result.filtered ; \
446          if diff result.filtered \
447                $(FULLEXAMPLEPATH)/$$example/check_result > result.differences ; \
448          then \
449            echo "passed" ; \
450            rm result.differences ; \
451          else \
452            echo "failed (more checkresults/$$example/result.differences)" ; \
453          fi ; \
454        done
455
456check-smt-examples :
457        @test -d checkresults || mkdir checkresults
458        @echo "Checking examples.  Results will be in checkresults/<example>/result.raw"
459        @echo "Running executable $(EXECUTABLEPATH) for SMTs "
460        @echo " (change with EXECUTABLE=...)"
461        @echo "Taking examples from $(FULLEXAMPLEPATH)"
462        @echo " (change with EXAMPLEPATH=...)"
463        @cwd=`pwd` ; \
464        for example in $(CHECK_SMT_EXAMPLES) ; \
465        do \
466          echo -n "Checking $(EXECUTABLEPATH) $$example ... " ; \
467          cd $$cwd ; \
468          test -d checkresults/$$example || \
469                mkdir checkresults/$$example ; \
470          cd checkresults/$$example ; \
471          $(EXECUTABLEPATH) $(FULLEXAMPLEPATH)/$$example/$$example.smt > result.raw 2> result.stderr ; \
472          sed -n '$(SED_CMD)' result.raw > result.filtered ; \
473          if diff result.filtered \
474                $(FULLEXAMPLEPATH)/$$example/check_result > result.differences ; \
475          then \
476            echo "passed" ; \
477            rm result.differences ; \
478          else \
479            awk '/read CNF file/ { print "Warning : CUSP for SMT is not built!"}' result.stderr; \
480            awk '!/read CNF file/ { print "failed (more checkresults/$$example/result.differences)"}' result.stderr; \
481          fi ; \
482        done
483
484
485#----------------------------------------------------------------------
486# Rules for installation
487#----------------------------------------------------------------------
488
489.PHONY : install uninstall installdirs
490
491#:
492#: install -- Install the product and libraries in bindir, libdir,
493#:            datadir, etc.
494
495install : $(PRODUCT) $(LIBRARY) installdirs
496        @echo "Installing $(bindir)/$(PRODUCT)"
497        @$(INSTALL_PROGRAM) $(PRODUCT) $(bindir)/$(PRODUCT)
498        @echo "Installing $(libdir)/$(LIBRARY)"
499        @$(INSTALL_DATA) $(LIBRARY) $(libdir)/$(LIBRARY)
500        @for file in $(SHAREFILES) ; do \
501                echo "Installing $(datadir)/$$file"; \
502                $(INSTALL_DATA) $(master_srcdir)/share/$$file \
503                        $(datadir)/$$file; \
504        done
505        @for file in $(HELPFILES) ; do \
506                echo "Installing $(datadir)/help/$$file"; \
507                $(INSTALL_DATA) $(master_srcdir)/share/help/$$file \
508                        $(datadir)/help/$$file; \
509        done
510        @for header in $(HEADERS); do \
511                echo "Installing $(includedir)/$$header"; \
512                $(INSTALL_DATA) $(master_srcdir)/src/*/$$header \
513                        $(includedir)/$$header; \
514        done
515
516#: uninstall -- Reverse the effects of "install"
517
518uninstall :
519        rm -f $(bindir)/$(PRODUCT)     
520        rm -f $(libdir)/$(LIBRARY)
521        @for file in $(SHAREFILES) ; \
522        do \
523          echo "Removing $(datadir)/$$file"; \
524          rm -f $(datadir)/$$file; \
525        done
526        @for file in $(HELPFILES) ; \
527        do \
528          echo "Removing $(datadir)/help/$$file"; \
529          rm -f $(datadir)/help/$$file; \
530        done
531        @for header in $(HEADERS); \
532        do \
533          echo "Removing $(includedir)/$$header"; \
534          rm -f $(includedir)/$$header; \
535        done
536
537installdirs :
538        $(master_srcdir)/helpers/mkinstalldirs \
539                $(bindir) $(libdir) $(includedir) $(datadir) $(datadir)/help \
540                $(mandir)
541
542#----------------------------------------------------------------------
543# Rules for cleaning
544#----------------------------------------------------------------------
545
546.PHONY : clean mostlyclean distclean
547
548#:
549#: clean -- Remove every file created by building
550
551clean mostlyclean :
552        rm -rf $(objectdir)/* $(PRODUCT) include
553
554#: distclean -- Remove every file created by building or configuring
555
556distclean : clean cleandependencies
557        rm -f Makefile config.status config.cache config.log
558
559#----------------------------------------------------------------------
560# Rule for performing a lint-like check on the source code
561#
562# Note: This requires gcc or g++
563#----------------------------------------------------------------------
564
565.PHONY : check-code
566
567#:
568#: check-code -- Run a lint-like check on the source code.
569#:               (useful for development)
570
571CHECK_FLAGS := -Wall -pedantic -Wmissing-declarations
572ifeq ($(CC),gcc)
573  CHECK_FLAGS := $(CHECK_FLAGS) -Wstrict-prototypes -Wmissing-prototypes
574endif
575
576check-code : $(CSRC)
577ifneq ($(findstring <$(CC)>,<gcc> <g++>),)
578        @rm -f *.o_checkcode
579        @for file in $^; \
580        do \
581          echo "------------------------ Checking $$file"; \
582          $(CC) -c $(CFLAGS) $(AC_FLAGS) $(CHECK_FLAGS) \
583                $(VERDATE) $(INCLUDEDIRS) \
584                -o $(objectdir)/checkcode_output.o $$file; \
585          rm -f $(objectdir)/checkcode_output.o; \
586        done
587        @rm -f *.o_checkcode
588else
589        @echo "check-code requires gcc or g++"
590        @echo "Reconfigure with gcc or g++"
591endif
592
593#----------------------------------------------------------------------
594# Rules that produce/delete the dependency file for every package
595#----------------------------------------------------------------------
596
597.PHONY : dependencies cleandependencies
598
599#:
600#: dependencies -- Create a list of dependency files.
601#:                 Useful when modifying header files.
602
603# Invoke the "dependency.make" Makefile on each package subdirectory,
604# passing the path, etc. to it.
605#
606# There's a strange feature in autoconf where lines of the form " VPATH="
607# are removed from the Makefile.  Thus, a flag is placed before the
608# VPATH= argument below.
609
610dependencies:
611ifneq ($(findstring <$(CC)>,<gcc> <g++>),)
612        for pkg in $(PKGS) ; \
613        do \
614          $(MAKE) --no-print-directory \
615                -f $(master_srcdir)/helpers/dependency.make \
616                CC="$(CC)" \
617                CFLAGS="$(CFLAGS)" VPATH="$(local_srcdir)/src/$$pkg" \
618                AC_FLAGS="$(AC_FLAGS)" \
619                INCLUDEDIRS="$(INCLUDEDIRS)" objectdir=$(objectdir) \
620                PKGNAME=$(local_srcdir)/src/$$pkg/$$pkg \
621                $(local_srcdir)/src/$$pkg/$$pkg.d ; \
622        done
623else
624        @echo "dependency requires gcc or g++"
625        @echo "Reconfigure with gcc or g++"
626endif
627
628cleandependencies:
629        rm -f $(local_srcdir)/src/*/*.d
630
631#----------------------------------------------------------------------
632# Rules for making a distribution file
633#----------------------------------------------------------------------
634
635.PHONY : dist
636
637#:
638#: dist -- Create a tarred, gzipped distribution file
639
640# Warning: "tar" under Digital Unix (on DEC Alphas) writes directories
641# that don't work under SunOS tar
642
643dist : $(DISTRIBUTION).tar.gz
644
645$(DISTRIBUTION).tar.gz : $(DISTFILES)
646ifeq ($(strip $(FULL_MISSING_PKGS)),)
647        rm -rf $(DISTRIBUTION)
648        umask 022; mkdir $(DISTRIBUTION)
649        for dir in $(DISTDIRS); \
650        do \
651          umask 022; mkdir $(DISTRIBUTION)/$$dir; \
652        done
653        @echo "Copying distribution files"
654        @for file in $(patsubst $(local_srcdir)/%, %, $^); \
655        do \
656          echo "  $$file"; \
657          cp -p $(local_srcdir)/$$file $(DISTRIBUTION)/$$file; \
658        done
659        - chmod -R a+r $(DISTRIBUTION)
660        - chmod -R u+w $(DISTRIBUTION)
661        tar cf - $(DISTRIBUTION) | gzip -9 > $(DISTRIBUTION).tar.gz
662        rm -rf $(DISTRIBUTION)
663else
664        @echo "Missing packages: $(FULL_MISSING_PKGS)"
665        @echo "Make sure PKGS lists all the packages"
666        @exit 1
667endif
668
669
670#----------------------------------------------------------------------
671# Rules for debugging the Makefile
672#----------------------------------------------------------------------
673
674.PHONY : debug-make
675
676DEBUG_VARS =    PKGS \
677                VPATH \
678                INCLUDEDIRS \
679                CSRC \
680                OBJECTS \
681                HEADERS \
682                MAKEINCLUDES \
683                CFLAGS \
684                AC_FLAGS \
685                master_srcdir \
686                LIBS
687
688#:
689#: debug-make -- Print a list of Makefile variables
690
691debug-make:
692        @$(foreach var, $(DEBUG_VARS), echo $(var)=$($(var)) ; )
Note: See TracBrowser for help on using the repository browser.