source: vis_dev/glu-2.1/Makefile.in @ 7

Last change on this file since 7 was 6, checked in by cecile, 13 years ago

Ajout de glus pour dev VIS mod
File size: 23.9 KB
Line 
1# FileName      [ Makefile.in ]
2#
3# PackageName   [ glu ]
4#
5# Synopsis      [ Package-wide Makefile ]
6#
7# Description   [ This file requires GNU's make program.
8#                 Run "configure" to generate the Makefile, or use
9#                 "config.status" (created by configure) to regenerate the
10#                 Makefile after modifying this file.
11#
12#                 Type "gmake help" for a list of valid targets. ]
13#
14# SeeAlso       [ configure.in ]
15#
16# Author        [ Stephen Edwards <sedwards@eecs.berkeley.edu> ]
17#
18# Copyright     [
19#  Copyright (c) 1994-1998 The Regents of the Univ. of California.
20#  All rights reserved.
21#
22#  Permission is hereby granted, without written agreement and without license
23#  or royalty fees, to use, copy, modify, and distribute this software and its
24#  documentation for any purpose, provided that the above copyright notice and
25#  the following two paragraphs appear in all copies of this software.
26#
27#  IN NO EVENT SHALL THE UNIVERSITY OF CALIFORNIA BE LIABLE TO ANY PARTY FOR
28#  DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
29#  OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF THE UNIVERSITY OF
30#  CALIFORNIA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31#
32#  THE UNIVERSITY OF CALIFORNIA SPECIFICALLY DISCLAIMS ANY WARRANTIES,
33#  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
34#  FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS ON AN
35#  "AS IS" BASIS, AND THE UNIVERSITY OF CALIFORNIA HAS NO OBLIGATION TO PROVIDE
36#  MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
37#  ]
38#
39# Revision      [$Id: Makefile.in,v 1.60 2005/05/15 05:43:36 fabio Exp $]
40
41# Default target:
42
43.PHONY : default
44
45default : all
46
47#----------------------------------------------------------------------
48# Lists of packages to compile.  Change this if you are only compiling
49# part of GLU
50#----------------------------------------------------------------------
51
52#PKGS = array
53PKGS = $(ALL_BASIC_PKGS)
54
55#BDD_PKGS = cmu
56BDD_PKGS = $(ALL_BDD_PKGS)
57
58#MDD_PKGS =
59MDD_PKGS = $(ALL_MDD_PKGS)
60
61#----------------------------------------------------------------------
62# This Makefile is designed for three different situations:
63#
64# 1. Single platform build (the default)
65#
66#    All packages listed in the PKGS variable
67#    local_srcdir = master_srcdir = .
68#
69# 2. Multi-platform build
70#
71#    All packages listed in the PKGS variable
72#    local_srcdir = master_srcdir = /where/source/files/reside
73#
74# 3. Multi-platform development (used at Berkeley)
75#
76#    Packages under development listed in the PKGS variable
77#    local_srcdir = ../common
78#    master_srcdir = /projects/glu/glu-devel/common
79#
80#    User has a directory structure that looks like
81#
82#       glu/common/src/         Subdirectory with package source files
83#                               under development.
84#
85#       glu/$PLATFORM/          Subdirectory with this Makefile.
86#                               Compilation is invoked here.
87#
88#       $PLATFORM is something like "alpha-g" (DEC Alpha, debug version)
89#
90#----------------------------------------------------------------------
91
92#----------------------------------------------------------------------
93# Information about all the packages
94#----------------------------------------------------------------------
95
96# Note: To add another BDD package, add it to this list and add a rule
97# of the form libbdd.a (see the existing ones for an example)
98
99ALL_BASIC_PKGS = array avl bdd epd error graph heap list mem mtr sparse st \
100                 util var_set
101ALL_BDD_PKGS = cal cu cmu
102ALL_MDD_PKGS = mdd
103
104# Generate the list of all packages NOT in the PKGS list
105
106MISSING_PKGS = $(filter-out $(PKGS), $(ALL_BASIC_PKGS))
107MISSING_BDD_PKGS = $(filter-out $(BDD_PKGS), $(ALL_BDD_PKGS))
108MISSING_MDD_PKGS = $(filter-out $(MDD_PKGS), $(ALL_MDD_PKGS))
109
110FULL_PKGS = $(PKGS) $(foreach bdd, $(BDD_PKGS), $(bdd)Bdd $(bdd)Port) \
111            $(MDD_PKGS)
112FULL_MISSING_PKGS = $(MISSING_PKGS) \
113        $(foreach bdd, $(MISSING_BDD_PKGS), $(bdd)Bdd $(bdd)Port) \
114        $(MISSING_MDD_PKGS)
115
116#----------------------------------------------------------------------
117# For safety
118#----------------------------------------------------------------------
119
120SHELL = /bin/sh
121.SUFFIXES:
122
123#----------------------------------------------------------------------
124# The name of the product and its version
125#----------------------------------------------------------------------
126
127PRODUCT = glu
128VERSION = 2.1
129
130#----------------------------------------------------------------------
131# Source directories
132#----------------------------------------------------------------------
133
134# Directory containing master source files.  This directory is searched
135# for packages NOT listed in the PKGS variable.  Defaults to "."
136# Override with  ./configure --srcdir=
137master_srcdir = @srcdir@
138
139# Directory containing local source files.  This directory is searched
140# for packages listed in the PKGS variable.  Defaults to the master source
141# directory (see above).
142# Override with ./configure --with-local-srcdir=
143local_srcdir =  @local_srcdir@
144
145#----------------------------------------------------------------------
146# Directories used while building
147#----------------------------------------------------------------------
148
149# Directory where object files will be placed during the build
150objectdir =     obj
151
152# Directory where links to header files will be placed during the build
153headerdir =     $(local_srcdir)/include
154
155#----------------------------------------------------------------------
156# Installation names and directories
157#----------------------------------------------------------------------
158
159# Name of the library to create
160LIBRARY =       lib$(PRODUCT).a
161
162# Names of the BDD libraries to create
163BDD_LIBRARIES = $(foreach bdd, $(BDD_PKGS), lib$(bdd).a)
164
165# Directory in which to install architecture-independent files
166# Set by ./configure --prefix=...
167prefix =        @prefix@
168
169# Directory in which to install architecture-dependent files
170# Set by ./configure --exec-prefix=...
171exec_prefix =   @exec_prefix@
172
173# Directory in which to install libraries
174libdir =        $(exec_prefix)/lib
175
176# Directory in which to install headers
177includedir =    $(prefix)/include
178
179#----------------------------------------------------------------------
180# The following are set by the configure script
181#----------------------------------------------------------------------
182
183AC_FLAGS =      @DEFS@
184RANLIB =        @RANLIB@
185AR =            @AR@
186CC =            @CC@
187CFLAGS =        @CFLAGS@
188INSTALL =       @INSTALL@
189INSTALL_DATA =  @INSTALL_DATA@
190
191#----------------------------------------------------------------------
192# Include the make templates from all the packages
193#
194# Each of these templates (e.g., array/array.make) should contains lines
195# of the form
196#
197# CSRC += source1.c source2.c
198# HEADERS += header1.h header2.h
199# MISC += misc1 misc2
200#
201# For BDD packages (both Port and Bdd), these should be, e.g.,
202#
203# CSRC_cmu += source1.c source2.c
204# HEADERS_cmu += header1.h
205#
206# For the MDD package the definition is
207#
208# CSRC_mdd = source1.c source2.c
209# HEADERS_mdd = header1.h
210# MISC += misc1 misc2
211#----------------------------------------------------------------------
212
213MAKEINCLUDES = \
214        $(foreach package, $(FULL_PKGS), \
215                $(local_srcdir)/src/$(package)/$(package).make )
216
217include $(MAKEINCLUDES)
218
219OBJECTS = $(addprefix $(objectdir)/,$(CSRC:.c=.o))
220
221# Collect the names of all the bdd package source files
222BDD_CSRC = $(foreach bdd_package, $(BDD_PKGS), $(CSRC_$(bdd_package)))
223BDD_HEADERS = $(foreach bdd_package, $(BDD_PKGS), $(HEADERS_$(bdd_package)))
224BDD_OBJECTS = $(addprefix $(objectdir)/,$(BDD_CSRC:.c=.o))
225
226CAL_OBJECTS = $(addprefix $(objectdir)/,$(CSRC_cal:.c=.o))
227CMU_OBJECTS = $(addprefix $(objectdir)/,$(CSRC_cmu:.c=.o))
228CU_OBJECTS = $(addprefix $(objectdir)/,$(CSRC_cu:.c=.o))
229
230# Save the names of the mdd package source files
231MDD_CSRC = $(CSRC_mdd)
232MDD_HEADERS = $(HEADERS_mdd) $(BDD_HEADERS)
233MDD_OBJECTS = $(addprefix $(objectdir)/,$(CSRC_mdd:.c=.o))
234
235#----------------------------------------------------------------------
236# Include the dependency files from each package directory.
237# A missing dependency file does not produce an error.
238#----------------------------------------------------------------------
239
240DEPENDENCIES = $(foreach package, $(PKGS) $(MDD_PKGS) \
241                 $(foreach bdd, $(BDD_PKGS), $(bdd)Bdd $(bdd)Port), \
242                 $(local_srcdir)/src/$(package)/$(package).d)
243
244-include $(DEPENDENCIES)
245
246#----------------------------------------------------------------------
247# Form the the list of directories to search for header files.
248#
249# INCLUDEDIRS looks like "-I/projects/glu/ -I/projects/vis/ ..."
250#----------------------------------------------------------------------
251
252INCLUDEDIRS = \
253        $(foreach package, $(FULL_PKGS), \
254                -I$(local_srcdir)/src/$(package) ) \
255        $(foreach package, $(FULL_MISSING_PKGS), \
256                -I$(master_srcdir)/src/$(package) ) \
257        -I$(objectdir)
258
259#----------------------------------------------------------------------
260# Form the list of directories to search for files listed in make rules.
261#
262# VPATH looks like /projects/vis:/projects/glu/: ...
263#----------------------------------------------------------------------
264
265VPATH = $(local_srcdir): \
266        $(master_srcdir): \
267        $(addprefix :$(local_srcdir)/src/,$(FULL_PKGS)): \
268        $(addprefix :$(master_srcdir)/src/,$(FULL_MISSING_PKGS)): \
269        $(objectdir)
270
271#----------------------------------------------------------------------
272# Definitions for the distribution file
273#----------------------------------------------------------------------
274
275DISTRIBUTION = $(PRODUCT)-$(VERSION)
276
277# Directories to include in the distribution file
278
279DISTDIRS = src obj $(addprefix src/,$(FULL_PKGS)) src/cuBdd/doc \
280           helpers src/cuBdd/doc/icons
281
282# Build/install helper files
283
284HELPERS = $(addprefix helpers/, \
285        install-sh mkinstalldirs config.guess config.sub dependency.make)
286
287# Files to include in the distribution file
288
289DISTFILES = \
290        README INSTALL NEWS \
291        configure configure.in Makefile.in $(HELPERS) \
292        $(CSRC) $(BDD_CSRC) $(MDD_CSRC) $(HEADERS) $(BDD_HEADERS) \
293        $(MDD_HEADERS) $(MAKEINCLUDES) \
294        $(MISC)
295
296#----------------------------------------------------------------------
297# Variables used by for Revision Control
298#----------------------------------------------------------------------
299
300# The root RCS directory
301rcs_rootdir          = /projects/glu/rcsRoot/common
302
303RCSFILES        = $(CSRC) $(BDD_CSRC) $(MDD_CSRC) $(HEADERS) $(BDD_HEADERS) \
304                        $(MDD_HEADERS) $(MISC) $(MAKEINCLUDES)
305
306RCSMISCFILES    = README INSTALL NEWS Makefile.in configure.in localconfigure \
307                  masterconfigure $(HELPERS)
308
309#----------------------------------------------------------------------
310# Implicit rules for compiling and archiving
311#----------------------------------------------------------------------
312
313# For compiling a source file into the object directory
314
315$(objectdir)/%.o : %.c
316        umask 2; $(CC) -c $(CFLAGS) $(AC_FLAGS) $(INCLUDEDIRS) -o $@  $<
317
318# Place object files into an archive
319
320%.a :
321        rm -f $@
322        umask 2; $(AR) cq $@ $^
323        $(RANLIB) $@
324
325######################################################################
326#                               RULES                                #
327######################################################################
328
329#:
330#: Useful targets:
331#:
332
333#----------------------------------------------------------------------
334# Rule for getting help
335#----------------------------------------------------------------------
336
337.PHONY : help
338
339#: help -- Print a list of targets
340
341# This prints all lines in this Makefile that begin with #:
342
343help :
344        @sed -n "s/^#://p" Makefile
345
346#----------------------------------------------------------------------
347# Always executed once when the Makefile is run
348#----------------------------------------------------------------------
349
350# Make sure the directory in which to place the objects exists
351
352ignored := $(shell umask 2; test -d $(objectdir) || mkdir $(objectdir))
353
354#----------------------------------------------------------------------
355# Rules to compile and build libraries
356#----------------------------------------------------------------------
357
358.PHONY : all
359
360#:
361#: all (the default) -- Create the libraries
362
363all : $(headerdir) $(LIBRARY) $(BDD_LIBRARIES)
364
365$(LIBRARY) : $(OBJECTS)
366
367libcal.a : $(CAL_OBJECTS) $(MDD_OBJECTS)
368
369libcmu.a : $(CMU_OBJECTS) $(MDD_OBJECTS)
370
371libcu.a : $(CU_OBJECTS) $(MDD_OBJECTS)
372
373$(headerdir) : $(HEADERS) $(MDD_HEADERS)
374        rm -rf $(headerdir)
375        umask 2; mkdir $(headerdir)
376        for header in $(HEADERS) $(MDD_HEADERS); do \
377          ln $(local_srcdir)/src/*/$$header $(headerdir)/$$header; \
378        done
379
380#----------------------------------------------------------------------
381# Warts
382#----------------------------------------------------------------------
383
384# Work around an optimizer bug in the native Ultrix compiler
385
386ifeq (@target@,mips-dec-ultrix4.5)
387$(objectdir)/calReduce.o : calReduce.c
388        umask 2; $(CC) -c -std1 -g $(AC_FLAGS) $(INCLUDEDIRS) -o $@  $<
389endif
390
391# Work around a bug in gcc 2.7.0
392
393ifeq ($(CC),gcc)
394  ifeq ($(shell gcc --version),2.7.0)
395
396$(objectdir)/cal.o : cal.c
397        umask 2; $(CC) -c -g $(AC_FLAGS) $(INCLUDEDIRS) -o $@  $<
398
399$(objectdir)/calBddSwapVars.o : calBddSwapVars.c
400        umask 2; $(CC) -c -g $(AC_FLAGS) $(INCLUDEDIRS) -o $@  $<
401
402  endif
403endif
404
405#----------------------------------------------------------------------
406# Rules to build test programs
407#----------------------------------------------------------------------
408
409.PHONY : check check-bdd check-cal check-cmu check-cu
410
411#:
412#: check -- Test the libraries (runs check-bdd)
413
414check : check-bdd
415
416#: check-bdd -- Compile simple test programs for each of the BDD packages
417#:              and run them
418
419check-bdd : check-cmu check-cal check-cu
420
421check-cal : obj/checkcal
422        obj/checkcal > checkcal.out
423        @echo "Test appears successful -- results in checkcal.out"
424
425obj/checkcal : libcal.a calTest.c
426        $(CC) -o obj/checkcal -DTEST $(CFLAGS) $(AC_FLAGS) $(INCLUDEDIRS) \
427                $(filter %.c, $^) -L. -lcal
428
429check-cmu : obj/checkcmu
430        obj/checkcmu > checkcmu.out
431        @echo "Test appears successful -- results in checkcmu.out"
432
433obj/checkcmu : libcmu.a $(LIBRARY) testbdd.c
434        $(CC) -o obj/checkcmu $(CFLAGS) $(AC_FLAGS) $(INCLUDEDIRS) \
435                $(filter %.c, $^) -L. -lcmu -l$(PRODUCT)
436
437check-cu : obj/checkcu src/cuBdd/r7x8.1.mat
438        obj/checkcu -p 2 $(filter %.mat, $^) > checkcu.out
439        @echo "Test appears successful -- results in checkcu.out"
440
441obj/checkcu : libcu.a $(LIBRARY) testcudd.c
442        $(CC) -o obj/checkcu $(CFLAGS) $(AC_FLAGS) $(INCLUDEDIRS) \
443                $(filter %.c, $^) -L. -lcu -l$(PRODUCT) -lm
444
445#----------------------------------------------------------------------
446# Rules that produce/delete the dependency file for every package
447#----------------------------------------------------------------------
448
449.PHONY : dependencies cleandependencies
450
451#:
452#: dependencies -- Create a list of dependency files.
453#:                 Useful when modifying header files.
454
455# Invoke the "dependency.make" Makefile on each package subdirectory,
456# passing the path, etc. to it.
457#
458# There's a strange feature in autoconf where lines of the form " VPATH="
459# are removed from the Makefile.  Thus, a flag is placed before the
460# VPATH= argument below.
461
462dependencies:
463ifneq ($(findstring <$(CC)>,<gcc> <g++>),)
464        for pkg in $(PKGS) $(foreach bdd, $(BDD_PKGS), $(bdd)Bdd $(bdd)Port) \
465                    $(MDD_PKGS) ; do \
466                $(MAKE) --no-print-directory \
467                        -f $(master_srcdir)/helpers/dependency.make \
468                        CC="$(CC)" \
469                        CFLAGS="$(CFLAGS)" VPATH="$(local_srcdir)/src/$$pkg" \
470                        AC_FLAGS="$(AC_FLAGS)" \
471                        INCLUDEDIRS="$(INCLUDEDIRS)" objectdir=$(objectdir) \
472                        PKGNAME=$(local_srcdir)/src/$$pkg/$$pkg \
473                        $(local_srcdir)/src/$$pkg/$$pkg.d ; \
474        done
475else
476        @echo "dependency requires gcc or g++"
477        @echo "Reconfigure with gcc or g++"
478endif
479
480cleandependencies:
481        rm -f $(local_srcdir)/src/*/*.d
482
483#----------------------------------------------------------------------
484# Rules for installation
485#----------------------------------------------------------------------
486
487.PHONY : install uninstall installdirs
488
489#:
490#: install -- Install the libraries and headers in libdir and includedir
491
492install : $(LIBRARY) $(BDD_LIBRARIES) installdirs
493        @if [ ! -f $(libdir)/$(LIBRARY) ] ; \
494        then \
495                echo "Installing $(libdir)/$(LIBRARY)"; \
496                $(INSTALL_DATA) $(LIBRARY) $(libdir)/$(LIBRARY); \
497        else \
498                echo "Warning: $(libdir)/$(LIBRARY) already exists" ; \
499        fi
500        @for lib in $(BDD_LIBRARIES); do \
501                if [ ! -f $(libdir)/$$lib ] ; \
502                then \
503                        echo "Installing $(libdir)/$$lib"; \
504                        $(INSTALL_DATA) $$lib $(libdir)/$$lib; \
505                else \
506                        echo "Warning: $(libdir)/$$lib already exists" ; \
507                fi ; \
508        done
509        @for header in $(HEADERS) $(MDD_HEADERS); do \
510                if [ ! -f $(includedir)/$$header ] ; \
511                then \
512                        echo "Installing $(includedir)/$$header"; \
513                        $(INSTALL_DATA) $(master_srcdir)/src/*/$$header \
514                                $(includedir)/$$header; \
515                else \
516                        echo "Warning: $(includedir)/$$header already exists"; \
517                fi ; \
518        done
519
520#: uninstall -- Reverse the effects of "install"
521
522uninstall :
523        rm -f $(libdir)/$(LIBRARY) $(addprefix $(libdir)/, $(BDD_LIBRARIES))
524        @for header in $(HEADERS) $(MDD_HEADERS); do \
525                echo "Removing $(includedir)/$$header"; \
526                rm -f $(includedir)/$$header; \
527        done
528
529installdirs :
530        $(master_srcdir)/helpers/mkinstalldirs $(libdir) $(includedir)
531
532#----------------------------------------------------------------------
533# Rules for making a distribution file
534# This only works when ALL of the packages are considered "local"
535#----------------------------------------------------------------------
536
537.PHONY : dist
538
539#:
540#: dist -- Create a tarred, gzipped distribution file
541
542# Warning: "tar" under Digital Unix (on DEC Alphas) writes directories
543# that don't work under SunOS tar
544
545dist : $(DISTRIBUTION).tar.gz
546
547$(DISTRIBUTION).tar.gz : $(DISTFILES)
548ifeq ($(strip $(FULL_MISSING_PKGS)),)
549        rm -rf $(DISTRIBUTION)
550        umask 022; mkdir $(DISTRIBUTION)
551        for dir in $(DISTDIRS); do \
552          umask 022; mkdir $(DISTRIBUTION)/$$dir; \
553        done
554        @echo "Copying distribution files"
555        @for file in $(patsubst $(local_srcdir)/%, %, $^); do \
556          echo "  $$file"; \
557          cp -p $(local_srcdir)/$$file $(DISTRIBUTION)/$$file; \
558        done
559        - chmod -R a+r $(DISTRIBUTION)
560        - chmod -R u+w $(DISTRIBUTION)
561        tar cf - $(DISTRIBUTION) | gzip -9 > $(DISTRIBUTION).tar.gz
562        rm -rf $(DISTRIBUTION)
563else
564        @echo "Missing packages: $(FULL_MISSING_PKGS)"
565        @echo "Make sure PKGS, BDD_PKGS, and MDD_PKGS list all the packages"
566        @exit 1
567endif
568
569#----------------------------------------------------------------------
570# Rules for rebuilding the configure file and Makefile
571#----------------------------------------------------------------------
572
573${master_srcdir}/configure : configure.in
574        cd ${master_srcdir} && autoconf
575        chmod -f 0775 ${master_srcdir}/config*
576
577config.status : configure
578        ./config.status --recheck
579
580Makefile : Makefile.in config.status
581        @echo "The master Makefile.in has been changed:"
582        @echo "run config.status"
583        @echo "Warning: This will overwrite any local Makefile modifications"
584        @exit 1
585
586#----------------------------------------------------------------------
587# Rules for cleaning
588#----------------------------------------------------------------------
589
590.PHONY : clean mostlyclean distclean
591
592clean mostlyclean :
593        rm -rf $(objectdir)/* include checkcal.out checkcmu.out checkcu.out
594
595distclean : clean cleandependencies
596        rm -f Makefile config.status config.cache config.log $(LIBRARY) \
597              $(BDD_LIBRARIES)
598
599#----------------------------------------------------------------------
600# Rule for performing a lint-like check on the source code
601#
602# Note: This requires gcc or g++
603#----------------------------------------------------------------------
604
605.PHONY : check_code
606
607#:
608#: check-code -- Run a lint-like check on the source code.
609#:               (useful for development)
610
611CHECK_FLAGS := -Wall -pedantic
612ifeq ($(CC),gcc)
613  CHECK_FLAGS += -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations
614endif
615
616check-code : $(CSRC) $(BDD_CSRC) $(MDD_CSRC)
617ifneq ($(findstring <$(CC)>,<gcc> <g++>),)
618        @rm -f *.o_checkcode
619        @for file in $^; do \
620          echo "------------------------ Checking $$file"; \
621          $(CC) -c $(CFLAGS) $(AC_FLAGS) $(CHECK_FLAGS) \
622                $(VERDATE) $(INCLUDEDIRS) \
623                -o $(objectdir)/checkcode_output.o $$file; \
624          rm -f $(objectdir)/checkcode_output.o; \
625        done
626        @rm -f *.o_checkcode
627else
628        @echo "check-code requires gcc or g++"
629        @echo "Reconfigure with gcc or g++"
630endif
631
632#----------------------------------------------------------------------
633# Revision control rules
634#
635# May be invoked with command-line overrides, e.g.,
636# gmake RCSFILES=foo.c rcs_co
637# gmake PKGS=array rcs_ci
638#----------------------------------------------------------------------
639
640.PHONY: rcs_ci rcs_co rcs_diff rcs_ident rcs_status
641
642#:
643#:       You may want to invoke the RCS rules with
644#:         gmake "PKGS=tst tbl" rcs_ci
645#:         gmake "RCSFILES=tstMain.c" rcs_co
646#:
647#: rcs_ci -- check in user-modified files and put an updated copy
648#:           in the central area
649
650rcs_ci: $(RCSFILES)
651        @for file in $(patsubst $(local_srcdir)/%, %, $^); \
652        do \
653          ci -u $(RCSFLAGS) $(local_srcdir)/$$file $(rcs_rootdir)/$$file,v; \
654          co -u $(RCSFLAGS) $(master_srcdir)/$$file $(rcs_rootdir)/$$file,v; \
655        done
656
657#: rcs_co -- check out files for modification
658
659rcs_co: $(RCSFILES)
660        @for file in $(patsubst $(local_srcdir)/%, %, $^); \
661        do \
662          co -l $(RCSFLAGS) $(local_srcdir)/$$file $(rcs_rootdir)/$$file,v; \
663        done
664
665#: rcs_diff -- Report differences between local files and checked-in versions
666
667rcs_diff: $(RCSFILES)
668        @for file in $(patsubst $(local_srcdir)/%, %, $^); \
669        do \
670          rcsdiff $(RCSFLAGS) $(local_srcdir)/$$file $(rcs_rootdir)/$$file,v; \
671        done
672
673#: rcs_ident -- Print the RCS identifier in each file
674
675rcs_ident: $(RCSFILES)
676        @for file in $(patsubst $(local_srcdir)/%, %, $^); \
677        do \
678          ident $(RCSFLAGS) $(local_srcdir)/$$file; \
679        done
680
681#: rcs_status -- Report who has checked out files
682
683rcs_status: $(RCSFILES)
684        @for file in $(patsubst $(local_srcdir)/%, %, $^); \
685        do \
686          rlog -L -h $(RCSFLAGS) $(rcs_rootdir)/$$file,v; \
687        done
688
689#----------------------------------------------------------------------
690# RCS rules for common/{Makefile.in, configure.in, localconfigure,
691# masterconfigure, mkinstalldirs, install-sh}
692#----------------------------------------------------------------------
693
694.PHONY : rcs_ci_misc rcs_co_misc rcs_diff_misc
695
696#: rcs_ci_misc -- Check in miscellaneous files, updating central area
697
698rcs_ci_misc: $(RCSMISCFILES)
699        @for file in $(patsubst $(local_srcdir)/%, %, $^); \
700        do \
701          ci -u $(RCSFLAGS) $(local_srcdir)/$$file $(rcs_rootdir)/$$file,v; \
702          co -u $(RCSFLAGS) $(master_srcdir)/$$file $(rcs_rootdir)/$$file,v; \
703        done
704
705#: rcs_co_misc -- Check out miscellaneous files
706
707rcs_co_misc: $(RCSMISCFILES)
708        @for file in $(patsubst $(local_srcdir)/%, %, $^); \
709        do \
710          co -l $(RCSFLAGS) $(local_srcdir)/$$file $(rcs_rootdir)/$$file,v; \
711        done
712
713#: rcs_diff_misc -- Report differences in miscellaneous files
714
715rcs_diff_misc: $(RCSMISCFILES)
716        @for file in $(patsubst $(local_srcdir)/%, %, $^); \
717        do \
718          rcsdiff $(RCSFLAGS) $(local_srcdir)/$$file $(rcs_rootdir)/$$file,v; \
719        done
720
721#: rcs_ident_misc -- Report RCS identifiers
722
723rcs_ident_misc: $(RCSMISCFILES)
724        @for file in $(patsubst $(local_srcdir)/%, %, $^); \
725        do \
726          ident $(RCSFLAGS) $(local_srcdir)/$$file; \
727        done
728
729#: rcs_status_misc -- Report checked in/out status, ownership
730
731rcs_status_misc: $(RCSMISCFILES)
732        @for file in $(patsubst $(local_srcdir)/%, %, $^); \
733        do \
734          rlog -L -h $(RCSFLAGS) $(rcs_rootdir)/$$file,v; \
735        done
736
737#----------------------------------------------------------------------
738# Rules for debugging the Makefile
739#----------------------------------------------------------------------
740
741DEBUG_VARS =    PKGS \
742        BDD_PKGS \
743        ALL_BASIC_PKGS \
744        ALL_BDD_PKGS \
745        ALL_MDD_PKGS \
746        MISSING_PKGS \
747        MISSING_BDD_PKGS \
748        MISSING_MDD_PKGS \
749        FULL_PKGS \
750        FULL_MISSING_PKGS \
751        SHELL \
752        PRODUCT \
753        VERSION \
754        prefix \
755        exec_prefix \
756        master_srcdir \
757        local_srcdir \
758        libdir \
759        includedir \
760        objectdir \
761        headerdir \
762        LIBRARY \
763        BDD_LIBRARIES \
764        AC_FLAGS \
765        RANLIB \
766        CC \
767        CFLAGS \
768        INSTALL \
769        INSTALL_DATA \
770        MAKEINCLUDES \
771        OBJECTS \
772        BDD_CSRC \
773        BDD_HEADERS \
774        CAL_OBJECTS \
775        CMU_OBJECTS \
776        CU_OBJECTS \
777        MDD_CSRC \
778        MDD_HEADERS \
779        MDD_OBJECTS \
780        INCLUDEDIRS \
781        VPATH \
782        DISTRIBUTION \
783        DISTDIRS \
784        DISTFILES \
785        GLU \
786        RCSFILES \
787        rcs_rootdir \
788        RCSMISCFILES
789
790.PHONY : debug-make
791
792#:
793#: debug-make - Print a list of Makefile variables
794
795debug-make:
796        @$(foreach var, $(DEBUG_VARS), echo $(var)=$($(var)) ; )
Note: See TracBrowser for help on using the repository browser.